gdb/testsuite/gdb.base/call-ar-st.exp

   1 #   Copyright 1998, 1999, 2000, 2001, 2004, 2007, 2008, 2009, 2010
   2 #   Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16
  17 # This file was written by Elena Zannoni (ezannoni@cygnus.com)
  18
  19
  20 if $tracelevel then {
  21         strace $tracelevel
  22 }
  23
  24
  25 set testfile "call-ar-st"
  26 set srcfile ${testfile}.c
  27 set binfile ${objdir}/${subdir}/${testfile}
  28
  29 # Test depends on printf, which the sparclet stub doesn't support.
  30 if { [istarget "sparclet-*-*"] } {
  31     return 0;
  32 }
  33
  34 if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
  35     untested "couldn't compile ${srcdir}/${subdir}/${srcfile}"
  36     return -1
  37 }
  38
  39
  40 # Create and source the file that provides information about the compiler
  41 # used to compile the test case.
  42
  43 if [get_compiler_info ${binfile}] {
  44     return -1;
  45 }
  46
  47 # Some targets can't call functions, so don't even bother with this
  48 # test.
  49 if [target_info exists gdb,cannot_call_functions] {
  50     setup_xfail "*-*-*" 2416
  51     fail "This target can not call functions"
  52     continue
  53 }
  54
  55 set oldtimeout $timeout
  56 set timeout [expr "$timeout + 60"]
  57
  58 # Set the current language to C.  This counts as a test.  If it
  59 # fails, then we skip the other tests.
  60
  61 proc set_lang_c {} {
  62     global gdb_prompt
  63
  64     gdb_test_no_output "set language c"
  65
  66     gdb_test_multiple "show language" "set language to \"c\"" {
  67         -re ".* source language is \"c\".*$gdb_prompt $" {
  68             pass "set language to \"c\""
  69             return 1
  70         }
  71         -re ".*$gdb_prompt $" {
  72             fail "set language to \"c\""
  73             return 0
  74         }
  75         timeout {
  76             fail "(timeout) set language to \"c\""
  77             return 0
  78         }
  79     }
  80 }
  81
  82 # Start with a fresh gdb.
  83
  84 gdb_exit
  85 gdb_start
  86 gdb_reinitialize_dir $srcdir/$subdir
  87 gdb_load ${binfile}
  88 gdb_test_no_output "set print sevenbit-strings"
  89 gdb_test_no_output "set print address off"
  90 gdb_test_no_output "set width 0"
  91
  92
  93 if ![runto_main] then {
  94     perror "couldn't run to breakpoint"
  95     continue
  96 }
  97
  98 get_debug_format
  99
 100 #go -until 1209
 101 gdb_test "tbreak 1209" \
 102     "Temporary breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \
 103     "tbreakpoint line 1209"
 104
 105 gdb_test continue \
 106 "Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \
 107 "run until breakpoint set at a line"
 108
 109
 110 #call print_double_array(double_array)
 111 if {![gdb_skip_float_test "print print_double_array(double_array)"] && \
 112     ![gdb_skip_stdio_test "print print_double_array(double_array)"] } {
 113   send_gdb "print print_double_array(double_array)\n"
 114   gdb_expect_list "print print_double_array(double_array)" ".*$gdb_prompt $" {
 115         "\[ \t\r\n\]+array_d :"
 116         "\[ \t\r\n\]+========="
 117         "\[ \t\r\n\]+0.000000"
 118         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]"
 119         "\[ \t\r\n\]+"
 120   }
 121 }
 122
 123 #call print_char_array(char_array)
 124
 125 if ![gdb_skip_stdio_test "print_char_array(char_array)"] {
 126     send_gdb "print print_char_array(char_array)\n"
 127     gdb_expect_list "print print_char_array(char_array)" ".*$gdb_prompt $" {
 128         "\[ \t\r\n\]+array_c :"
 129         "\[ \t\r\n\]+========="
 130         "\[ \t\r\n\]+\[ \t\r\n\]+Z"
 131         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 132         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 133         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
 134     }
 135 }
 136
 137
 138
 139
 140 #go -until 1216
 141 gdb_test "tbreak 1216" \
 142 "Temporary breakpoint.*file.*$srcfile, line 1216.*" \
 143 "tbreakpoint line 1216"
 144
 145 if ![gdb_skip_stdio_test "continue to 1216"] {
 146     send_gdb "continue\n"
 147     gdb_expect_list "continue to 1216" ".*$gdb_prompt $" {
 148         "\[ \t\r\n\]+array_c :"
 149         "\[ \t\r\n\]+========="
 150         "\[ \t\r\n\]+\[ \t\r\n\]+Z"
 151         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 152         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 153         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
 154         "\[ \t\r\n\]+main.*at.*:1216"
 155         "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
 156     }
 157 } else {
 158     gdb_test "continue" ".*" ""
 159 }
 160
 161 # I am disabling this test, because it takes too long. I verified by
 162 # hand that it works, feel free to check for yourself.
 163 #call print_all_arrays(integer_array, char_array, float_array, double_array)
 164 #send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n"
 165 #gdb_expect {
 166 #    -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1  -2  -3  -4  -5  -6  -7  -8\[ \t\r\n\]+-9  -10  -11  -12  -13  -14  -15  -16\[ \t\r\n\]+-17  -18  -19  -20  -21  -22  -23  -24\[ \t\r\n\]+-25  -26  -27  -28  -29  -30  -31  -32\[ \t\r\n\]+-33  -34  -35  -36  -37  -38  -39  -40\[ \t\r\n\]+-41  -42  -43  -44  -45  -46  -47  -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450  0.284900  0.427350  0.569801  0.712251  0.854701  0.997151  1.139601\[ \t\r\n\]+1.282051  1.424501  1.566952  1.709402  1.851852  1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700  46.913400  70.370100  93.826800  117.283500  140.740200  164.196900  187.653600\[ \t\r\n\]+211.110300  234.567000  258.023700  281.480400  304.937100  328.393800  351.850500  375.307200\[ \t\r\n\]+398.763900  422.220600  445.677300  469.134000  492.590700  516.047400  539.504100  562.960800\[ \t\r\n\]+586.41750  609.874200  633.330900  656.787600  680.244300  703.701000  727.157700  750.614400\[ \t\r\n\]+774.071100  797.527800  820.984500  844.441200  867.897900  891.354600  914.811300  938.268000\[ \t\r\n\]+961.724700  985.181400  1008.638100  1032.094800  1055.551500  1079.008200  1102.464900  1125.921600\[ \t\r\n\]+1149.378300  1172.835000  1196.291700  1219.748400  1243.205100  1266.661800  1290.118500  1313.575200\[ \t\r\n\]+1337.031900  1360.488600  1383.945300  1407.402000  1430.858700  1454.315400  1477.772100  1501.228800\[ \t\r\n\]+1524.685500  1548.142200  1571.598900  1595.055600  1618.512300  1641.969000  1665.425700  1688.882400\[ \t\r\n\]+1712.339100  1735.795800  1759.252500  1782.709200  1806.165900  1829.622600  1853.079300  1876.536000\[ \t\r\n\]+1899.992700  1923.449400  1946.906100  1970.362800  1993.819500  2017.276200  2040.732900  2064.189600\[ \t\r\n\]+2087.646300  2111.103000  2134.559700  2158.016400  2181.473100  2204.929800  2228.386500  2251.843200\[ \t\r\n\]+2275.299900  2298.756600  2322.213300.*$gdb_prompt $" {
 167 #        pass "print print_all_arrays(integer_array, char_array, float_array, double_array)"
 168 #   }
 169 #    -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" }
 170 #    timeout           { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" }
 171 #  }
 172
 173 #set timeout $oldtimeout
 174 #go -until 1220
 175 gdb_test "tbreak 1220" \
 176         "Temporary breakpoint.* file .*$srcfile, line 1220.*" \
 177         "tbreakpoint line 1220"
 178
 179 if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \
 180     ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } {
 181     send_gdb "continue\n"
 182     gdb_expect_list "continuing to breakpoint 1220" ".*$gdb_prompt $" {
 183         "Continuing\\."
 184         "\[ \t\r\n\]+array_d :"
 185         "\[ \t\r\n\]+========="
 186         "\[ \t\r\n\]+0.000000"
 187         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 188         "\[ \t\r\n\]+"
 189         ".*array_f :"
 190         ".*student id :\[\t \]+.*YELLOW"
 191         ".*array_i :"
 192         ".*main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
 193     }
 194 } else {
 195     gdb_test "continue" ".*" ""
 196 }
 197
 198 #step
 199 gdb_test "step" \
 200     "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*" \
 201     "step inside print_all_arrays"
 202
 203 #step -over
 204 if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] {
 205     gdb_test "next" \
 206         "array_i :.*307.*print_char_array.*" \
 207         "next over print_int_array in print-all_arrays"
 208 } else {
 209     gdb_test "next" ".*" ""
 210 }
 211
 212 #call print_double_array(array_d)
 213 if {![gdb_skip_float_test "print print_double_array(array_d)"] && \
 214     ![gdb_skip_stdio_test "print print_double_array(array_d)"] } {
 215     send_gdb "print print_double_array(array_d)\n"
 216     gdb_expect_list "print print_double_array(array_d)" ".*$gdb_prompt $" {
 217         "array_d :"
 218         "\[ \t\r\n\]+========="
 219         "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
 220         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 221         "\[ \t\r\n\]+"
 222     }
 223 }
 224
 225 #go -until 1236
 226 gdb_test "tbreak 1236" \
 227 "Temporary breakpoint.* file .*$srcfile, line 1236.*" \
 228 "tbreakpoint line 1236"
 229
 230 if {![gdb_skip_float_test "continuing to 1236"] && \
 231     ![gdb_skip_stdio_test "continuing to 1236"] } {
 232     send_gdb "continue\n"
 233     gdb_expect_list "continuing to 1236"  ".*$gdb_prompt $" {
 234         "Continuing\\..*array_c"
 235         ".*array_f"
 236         "\[ \t\r\n\]+array_d :"
 237         "\[ \t\r\n\]+========="
 238         "\[ \t\r\n\]+0.000000"
 239         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 240         "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
 241     }
 242 } else {
 243     gdb_test "continue" ".*" ""
 244 }
 245
 246
 247 #call sum_array_print(10, *list1, *list2, *list3, *list4)
 248
 249 if ![gdb_skip_stdio_test "print sum_array_print(...)"] {
 250     gdb_test "print sum_array_print(10, *list1, *list2, *list3, *list4)" \
 251         ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*" \
 252         "print sum_array_print(10, *list1, *list2, *list3, *list4)"
 253 }
 254
 255 #step over
 256 if ![gdb_skip_stdio_test "next to 1237"] {
 257     gdb_test "next" \
 258         "BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*" \
 259         "next to 1237"
 260 } else {
 261     gdb_test "next" ".*" ""
 262 }
 263
 264 #call print_array_rep(\*list1, \*list2, \*list3)
 265
 266 if ![gdb_skip_stdio_test "print print_array_rep(...)"] {
 267     gdb_test "print print_array_rep(\*list1, \*list2, \*list3)" \
 268         "Contents of linked list3:.*" \
 269         "print print_array_rep(*list1, *list2, *list3)"
 270 }
 271
 272 #go -until 1241
 273 gdb_test "tbreak 1241" \
 274     "Temporary breakpoint..* file .*$srcfile, line 1241.*" \
 275     "tbreakpoint line 1241"
 276
 277 gdb_test "continue" \
 278     "main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \
 279     "continue to 1241"
 280
 281
 282 # Run into sum_array_print, and verify that the arguments were passed
 283 # accurately.
 284 #
 285 # Note that we shouldn't use a `step' here to get into
 286 # sum_array_print; GCC may emit calls to memcpy to put the arguments
 287 # in the right place, and a step may end up in memcpy instead.  This
 288 # may itself be a bug, but it's not the one we're trying to catch
 289 # here.  I've added something to step-test.exp for this.
 290 gdb_test "break sum_array_print" \
 291         ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \
 292         "set breakpoint in sum_array_print"
 293 gdb_test_no_output "set print frame-arguments all"
 294 gdb_test "continue" \
 295         ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
 296         "check args of sum_array_print"
 297
 298 #call print_array_rep(linked_list1, linked_list2, linked_list3)
 299 # this calls works from gdb without gdb_expect. But it does seem to hang
 300 #from within gdb_expect.
 301 #I comment this out
 302 #send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n"
 303 #gdb_expect {
 304 #    -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" {
 305 #        pass "print print_array_rep(linked_list1, linked_list2, linked_list3)"
 306 #      }
 307 #    -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" }
 308 #    timeout           { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" }
 309 #}
 310
 311
 312 #go -until 1281
 313 gdb_test "tbreak 1281" \
 314     "Temporary breakpoint.* file .*call-ar-st.c, line 1281.*" \
 315     "tbreakpoint line 1281"
 316
 317 if ![gdb_skip_stdio_test "continuing to 1281"] {
 318     gdb_test "continue" \
 319         "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*" \
 320         "continue to 1281"
 321 } else {
 322     gdb_test "continue" ".*" ""
 323 }
 324
 325 #call print_small_structs(*struct1, *struct2, *struct3, *struct4,
 326 #                         *flags, *flags_combo, *three_char, *five_char,
 327 #                         *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
 328
 329 if {![gdb_skip_float_test "print print_small_structs(...)"] && \
 330     ![gdb_skip_stdio_test "print print_small_structs(...)"] } {
 331     send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
 332     gdb_expect_list "print print_small_structs" ".*$gdb_prompt $" {
 333         "\[\t\r\n \]+alpha"
 334         "\[\t\r\n \]+gamma"
 335         "\[\t\r\n \]+epsilon"
 336         "\[\t\r\n \]+alpha"
 337         "\[\t\r\n \]+gamma"
 338         "\[\t\r\n \]+epsilon"
 339         "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
 340         "\[\t\r\n \]+Contents of three_char_t:"
 341         "\[\t\r\n \]+a[ \t]*b[ \t]*c"
 342         "\[\t\r\n \]+Contents of five_char_t:"
 343         "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p"
 344         "\[\t\r\n \]+Contents of int_char_combo_t:"
 345         "\[\t\r\n \]+123[ \t]*z"
 346         "\[\t\r\n \]+Sum of the 4 struct values and seed :"
 347         "\[\t\r\n \]+52"
 348         "\[\t\r\n \]+Contents of struct1:"
 349         "\[\t\r\n \]+6[ \t]*0"
 350         "\[\t\r\n \]+Contents of struct2:"
 351         "\[\t\r\n \]+10[ \t]*0"
 352         "\[\t\r\n \]+Contents of struct3:"
 353         "\[\t\r\n \]+12[ \t]*0"
 354         "\[\t\r\n \]+Contents of one_double_t:"
 355         "\[\t\r\n \]+10.500000"
 356         "\[\t\r\n \]+Contents of one_double_t:"
 357         "\[\t\r\n \]+-3.375000"
 358         "\[\t\r\n \]+Contents of one_double_t:"
 359         "\[\t\r\n \]+675.093750"
 360         "\[\t\r\n \]+Contents of two_floats_t:"
 361         "\[\t\r\n \]+45.234001[ \t]*43.599998"
 362         "\[\t\r\n \]+Contents of two_floats_t:"
 363         "\[\t\r\n \]+78.010002[ \t]*122.099998"
 364         "\[\t\r\n \]+Contents of two_floats_t:"
 365         "\[\t\r\n \]+-1232.344971[ \t]*-199.210007"
 366     }
 367 }
 368
 369 #call compute_with_small_structs(20)
 370 gdb_test "print compute_with_small_structs(20)" \
 371     "\[0-9\]+ = void" \
 372     "print compute_with_small_structs(20)"
 373
 374
 375 #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098,
 376 #                       3.14, -5678.12345, -0.11111111, 216.97065)
 377
 378 if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \
 379     ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} {
 380     send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n"
 381     gdb_expect_list "print print_ten_doubles" ".*$gdb_prompt $" {
 382         "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*"
 383         "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*"
 384         "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*"
 385         "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*"
 386         "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*"
 387     }
 388 }
 389
 390 #go -until 1286
 391 gdb_test "tbreak 1286" \
 392     "Temporary breakpoint .* file .*call-ar-st.c, line 1286.*" \
 393     "tbreakpoint line 1286"
 394
 395 gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286"
 396
 397 if { [istarget "hppa*-*-hpux*"] } {
 398     #
 399     # NOTE:(FIXME)
 400     # the aCC demangler cannot demangle the name of a function with >10 args.
 401     # so I added a .* after the name of the function, to match the
 402     # incredibly long mangled name
 403     # (getting aCC's libdemangle.a bundled w/ the system?)
 404     # DTS CLLbs16994  coulter 990114
 405     #
 406     # FIXME: use step for hppa* testing for now
 407     # guo 990621
 408     #
 409     gdb_test "step" \
 410         "print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);" \
 411         "step into print_long_arg_list"
 412 } else {
 413
 414     # We can't just assume that a "step" will get us into
 415     # print_long_arg_list here,either.
 416     gdb_test "tbreak print_long_arg_list" \
 417         "Temporary breakpoint .* file .*call-ar-st.c, line .*" \
 418         "tbreak in print_long_arg_list after stepping into memcpy"
 419     # The short match case below handles cases where a buffer
 420     # overflows or something, and expect can't deal with the full
 421     # line.  Perhaps a more elegant solution exists... -sts 1999-08-17
 422     if {![gdb_skip_float_test "step into print_long_arg_list"]} {
 423         gdb_test_multiple "continue" "step into print_long_arg_list" {
 424             -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
 425                 pass "step into print_long_arg_list"
 426             }
 427             -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
 428                 pass "step into print_long_arg_list (short match)"
 429             }
 430         }
 431     } else {
 432         # If skipping float tests, don't expect anything in arg list.
 433         gdb_test "continue" \
 434             "print_long_arg_list \\(.*\\).*" \
 435             "step into print_long_arg_list"
 436     }
 437 }
 438
 439 set ws "\[\n\r\t \]+"
 440
 441 #call print_small_structs(struct1, struct2, struct3, struct4, flags,
 442 #                         flags_combo, three_char, five_char, int_char_combo,
 443 #                         d1, d2, d3, f1, f2, f3)
 444
 445 if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \
 446     ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } {
 447
 448     # On 32-bit SPARC, some of the args are passed by ref, others by
 449     # value, and GDB gets confused and says "Invalid cast" because it
 450     # thinks it has to cast the structure into a pointer to structure.
 451     if { [test_debug_format "stabs"] } then {
 452         setup_kfail "gdb/1539" "sparc-*-*"
 453     }
 454
 455     send_gdb "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)\n"
 456     gdb_expect_list "print print_small_structs from print_long_arg_list" ".*$gdb_prompt $" {
 457         "\[\t\r\n \]+alpha"
 458         "\[\t\r\n \]+gamma"
 459         "\[\t\r\n \]+epsilon"
 460         "\[\t\r\n \]+alpha"
 461         "\[\t\r\n \]+gamma"
 462         "\[\t\r\n \]+epsilon"
 463         "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
 464         "\[\t\r\n \]+Contents of three_char_t:"
 465         "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c"
 466         "\[\t\r\n \]+Contents of five_char_t:"
 467         "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p"
 468         "\[\t\r\n \]+Contents of int_char_combo_t:"
 469         "\[\t\r\n \]+123\[ \t\]*z"
 470         "\[\t\r\n \]+Sum of the 4 struct values and seed :"
 471         "\[\t\r\n \]+52"
 472         "\[\t\r\n \]+Contents of struct1:"
 473         "\[\t\r\n \]+6\[ \t\]*0"
 474         "\[\t\r\n \]+Contents of struct2:"
 475         "\[\t\r\n \]+10\[ \t\]*0"
 476         "\[\t\r\n \]+Contents of struct3:"
 477         "\[\t\r\n \]+12\[ \t\]*0"
 478         "\[\t\r\n \]+Contents of one_double_t:"
 479         "\[\t\r\n \]+10.500000"
 480         "\[\t\r\n \]+Contents of one_double_t:"
 481         "\[\t\r\n \]+-3.375000"
 482         "\[\t\r\n \]+Contents of one_double_t:"
 483         "\[\t\r\n \]+675.093750"
 484         "\[\t\r\n \]+Contents of two_floats_t:"
 485         "\[\t\r\n \]+45.234001\[ \t\]*43.599998"
 486         "\[\t\r\n \]+Contents of two_floats_t:"
 487         "\[\t\r\n \]+78.010002\[ \t\]*122.099998"
 488         "\[\t\r\n \]+Contents of two_floats_t:"
 489         "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007"
 490     }
 491 }
 492
 493
 494 #go -until 1300
 495 gdb_test "tbreak 1300" \
 496     "Temporary breakpoint.* file .*call-ar-st.c, line 1300.*" \
 497     "tbreakpoint line 1300"
 498
 499 if ![gdb_skip_stdio_test "continuing to 1300"] {
 500     gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
 501             "continue to 1300"
 502 } else {
 503     gdb_test "continue" ".*" ""
 504 }
 505
 506 #step
 507 gdb_test "step" \
 508     "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;" \
 509     "step into init_bit_flags_combo"
 510
 511 #call print_bit_flags_combo(*bit_flags_combo)
 512 if ![gdb_skip_stdio_test "continuing to 1300"] {
 513     gdb_test "print print_bit_flags_combo(*bit_flags_combo)" \
 514         "alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*" \
 515         "print print_bit_flags_combo from init_bit_flags_combo"
 516 }
 517
 518
 519 #go -until 1305
 520 gdb_test "tbreak 1305" \
 521     "Temporary breakpoint.* file .*call-ar-st.c, line 1305.*" \
 522     "tbreakpoint line 1305"
 523
 524 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
 525 "continue to 1305"
 526
 527 #call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
 528
 529 # FIXME:
 530 # HP aCC demangler currently does not handle hp aCC functions with >10 args
 531 # DTS CLLbs16994  coulter 990114
 532
 533 if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
 534
 535 if {![gdb_skip_float_test "print print_long_arg_list"] && \
 536     ![gdb_skip_stdio_test "print print_long_arg_list"] } {
 537     send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
 538     gdb_expect_list "print print_long_arg_list" ".*$gdb_prompt $" {
 539         "\[ \n\r\t\]+double : 22.250000"
 540         "\[ \n\r\t\]+double : 33.375000"
 541         "\[ \n\r\t\]+int : 0"
 542         "\[ \n\r\t\]+int : -25"
 543         "\[ \n\r\t\]+int : 100"
 544         "\[ \n\r\t\]+int : 2345"
 545         "\[ \n\r\t\]+alpha"
 546         "\[ \n\r\t\]+gamma"
 547         "\[ \n\r\t\]+epsilon"
 548         "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n"
 549         "\[ \n\r\t\]+Contents of three_char_t:"
 550         "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z"
 551         "\[ \n\r\t\]+Contents of five_char_t:"
 552         "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o"
 553         "\[ \n\r\t\]+Contents of int_char_combo_t:"
 554         "\[ \n\r\t\]+123\[ \t\]+z"
 555         "\[ \n\r\t\]+Sum of the 4 struct values and seed :"
 556         "\[ \n\r\t\]+52"
 557         "\[ \n\r\t\]+Contents of struct1:"
 558         "\[ \n\r\t\]+6\[ \t\]+0"
 559         "\[ \n\r\t\]+Contents of struct2:"
 560         "\[ \n\r\t\]+10\[ \t\]+0"
 561         "\[ \n\r\t\]+Contents of struct3:"
 562         "\[ \n\r\t\]+12\[ \t\]+0"
 563         "\[ \n\r\t\]+Contents of one_double_t:"
 564         "\[ \n\r\t\]+1.111110"
 565         "\[ \n\r\t\]+Contents of one_double_t:"
 566         "\[ \n\r\t\]+-345.340000"
 567         "\[ \n\r\t\]+Contents of one_double_t:"
 568         "\[ \n\r\t\]+546464.200000"
 569         "\[ \n\r\t\]+Contents of two_floats_t:"
 570         "\[ \n\r\t\]+0.234000\[ \t\]+453.100006"
 571         "\[ \n\r\t\]+Contents of two_floats_t:"
 572         "\[ \n\r\t\]+78.345001\[ \t\]+23.090000"
 573         "\[ \n\r\t\]+Contents of two_floats_t:"
 574         "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000"
 575     }
 576 }
 577
 578
 579 #go -until 1311
 580 gdb_test "tbreak 1311" \
 581     "Temporary breakpoint.* file .*call-ar-st.c, line 1311.*" \
 582     "tbreakpoint line 1311"
 583
 584 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \
 585 "continue to 1311"
 586
 587
 588 #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
 589 if ![gdb_skip_stdio_test "print sum_struct_print(...)"] {
 590     gdb_test "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \
 591         "Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*" \
 592         "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
 593 }
 594
 595
 596 #call print_struct_rep(*struct1, *struct2, *struct3)
 597 if ![gdb_skip_stdio_test "print print_struct_rep(...)"] {
 598     send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n"
 599     gdb_expect_list "print print_struct_rep(*struct1, *struct2, *struct3)" \
 600             ".*$gdb_prompt $" {
 601         "\[ \t\n\r\]+Contents of struct1:"
 602         "\[ \t\n\r\]+        22         0"
 603         "\[ \t\n\r\]+Contents of struct2:"
 604         "\[ \t\n\r\]+        42         0"
 605         "\[ \t\n\r\]+Contents of struct3:"
 606         "\[ \t\n\r\]+        62         0"
 607     }
 608 }
 609
 610 if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
 611     gdb_test "print print_one_large_struct(*list1)" \
 612         "         4         1.*" \
 613         "print print_one_large_struct(*list1)"
 614 }
 615
 616 set timeout $oldtimeout
 617 return
 618