1 # Copyright 1998, 1999, 2000, 2001, 2004, 2007, 2008
2 # Free Software Foundation, Inc.
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 3 of the License, or
7 # (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program. If not, see <http://www.gnu.org/licenses/>.
17 # This file was written by Elena Zannoni (ezannoni@cygnus.com)
27 set testfile "call-ar-st"
28 set srcfile ${testfile}.c
29 set binfile ${objdir}/${subdir}/${testfile}
31 # Test depends on printf, which the sparclet stub doesn't support.
32 if { [istarget "sparclet-*-*"] } {
36 if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
37 untested "couldn't compile ${srcdir}/${subdir}/${srcfile}"
42 # Create and source the file that provides information about the compiler
43 # used to compile the test case.
45 if [get_compiler_info ${binfile}] {
49 # Some targets can't call functions, so don't even bother with this
51 if [target_info exists gdb,cannot_call_functions] {
52 setup_xfail "*-*-*" 2416
53 fail "This target can not call functions"
57 set oldtimeout $timeout
58 set timeout [expr "$timeout + 60"]
60 # Set the current language to C. This counts as a test. If it
61 # fails, then we skip the other tests.
66 send_gdb "set language c\n"
68 -re ".*$gdb_prompt $" {}
69 timeout { fail "set language c (timeout)" ; return 0; }
72 send_gdb "show language\n"
74 -re ".* source language is \"c\".*$gdb_prompt $" {
75 pass "set language to \"c\""
78 -re ".*$gdb_prompt $" {
79 fail "setting language to \"c\""
83 fail "can't show language (timeout)"
89 # Start with a fresh gdb.
93 gdb_reinitialize_dir $srcdir/$subdir
95 send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
96 send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
97 send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
100 if ![runto_main] then {
101 perror "couldn't run to breakpoint"
108 gdb_test "tbreak 1209" \
109 "Temporary breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \
110 "tbreakpoint line 1209"
113 "Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \
114 "run until breakpoint set at a line"
117 #call print_double_array(double_array)
118 if {![gdb_skip_float_test "print print_double_array(double_array)"] && \
119 ![gdb_skip_stdio_test "print print_double_array(double_array)"] } {
120 send_gdb "print print_double_array(double_array)\n"
121 gdb_expect_list "print print_double_array(double_array)" ".*$gdb_prompt $" {
122 "\[ \t\r\n\]+array_d :"
123 "\[ \t\r\n\]+========="
124 "\[ \t\r\n\]+0.000000"
125 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]"
130 #call print_char_array(char_array)
132 if ![gdb_skip_stdio_test "print_char_array(char_array)"] {
133 send_gdb "print print_char_array(char_array)\n"
134 gdb_expect_list "print print_char_array(char_array)" ".*$gdb_prompt $" {
135 "\[ \t\r\n\]+array_c :"
136 "\[ \t\r\n\]+========="
137 "\[ \t\r\n\]+\[ \t\r\n\]+Z"
138 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
139 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
140 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
148 gdb_test "tbreak 1216" \
149 "Temporary breakpoint.*file.*$srcfile, line 1216.*" \
150 "tbreakpoint line 1216"
152 if ![gdb_skip_stdio_test "continue to 1216"] {
153 send_gdb "continue\n"
154 gdb_expect_list "continue to 1216" ".*$gdb_prompt $" {
155 "\[ \t\r\n\]+array_c :"
156 "\[ \t\r\n\]+========="
157 "\[ \t\r\n\]+\[ \t\r\n\]+Z"
158 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
159 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
160 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
161 "\[ \t\r\n\]+main.*at.*:1216"
162 "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
165 gdb_test "continue" "" ""
168 # I am disabling this test, because it takes too long. I verified by
169 # hand that it works, feel free to check for yourself.
170 #call print_all_arrays(integer_array, char_array, float_array, double_array)
171 #send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n"
173 # -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1 -2 -3 -4 -5 -6 -7 -8\[ \t\r\n\]+-9 -10 -11 -12 -13 -14 -15 -16\[ \t\r\n\]+-17 -18 -19 -20 -21 -22 -23 -24\[ \t\r\n\]+-25 -26 -27 -28 -29 -30 -31 -32\[ \t\r\n\]+-33 -34 -35 -36 -37 -38 -39 -40\[ \t\r\n\]+-41 -42 -43 -44 -45 -46 -47 -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450 0.284900 0.427350 0.569801 0.712251 0.854701 0.997151 1.139601\[ \t\r\n\]+1.282051 1.424501 1.566952 1.709402 1.851852 1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.41750 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*$gdb_prompt $" {
174 # pass "print print_all_arrays(integer_array, char_array, float_array, double_array)"
176 # -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" }
177 # timeout { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" }
180 #set timeout $oldtimeout
182 gdb_test "tbreak 1220" \
183 "Temporary breakpoint.* file .*$srcfile, line 1220.*" \
184 "tbreakpoint line 1220"
186 if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \
187 ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } {
188 send_gdb "continue\n"
189 gdb_expect_list "continuing to breakpoint 1220" ".*$gdb_prompt $" {
191 "\[ \t\r\n\]+array_d :"
192 "\[ \t\r\n\]+========="
193 "\[ \t\r\n\]+0.000000"
194 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
197 ".*student id :\[\t \]+.*YELLOW"
199 ".*main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
202 gdb_test "continue" "" ""
208 -re "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*$gdb_prompt $" {pass "step inside print_all_arrays"}
209 -re ".*$gdb_prompt $" { fail "step inside print_all_arrays" }
210 timeout { fail "step inside print_all_arrays (timeout)" }
215 if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] {
218 -re "array_i :.*307.*print_char_array.*$gdb_prompt $" {
219 pass "next over print_int_array in print-all_arrays"
221 -re ".*$gdb_prompt $" {
222 fail "next over print_int_array in print-all_arrays"
225 fail "next over print_int_array in print-all_arrays (timeout)"
229 gdb_test "next" "" ""
232 #call print_double_array(array_d)
233 if {![gdb_skip_float_test "print print_double_array(array_d)"] && \
234 ![gdb_skip_stdio_test "print print_double_array(array_d)"] } {
235 send_gdb "print print_double_array(array_d)\n"
236 gdb_expect_list "print print_double_array(array_d)" ".*$gdb_prompt $" {
238 "\[ \t\r\n\]+========="
239 "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
240 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
246 gdb_test "tbreak 1236" \
247 "Temporary breakpoint.* file .*$srcfile, line 1236.*" \
248 "tbreakpoint line 1236"
250 if {![gdb_skip_float_test "continuing to 1236"] && \
251 ![gdb_skip_stdio_test "continuing to 1236"] } {
252 send_gdb "continue\n"
253 gdb_expect_list "continuing to 1236" ".*$gdb_prompt $" {
254 "Continuing\\..*array_c"
256 "\[ \t\r\n\]+array_d :"
257 "\[ \t\r\n\]+========="
258 "\[ \t\r\n\]+0.000000"
259 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
260 "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
263 gdb_test "continue" "" ""
267 #call sum_array_print(10, *list1, *list2, *list3, *list4)
269 if ![gdb_skip_stdio_test "print sum_array_print(...)"] {
270 send_gdb "print sum_array_print(10, *list1, *list2, *list3, *list4)\n"
272 -re ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*$gdb_prompt $" {
273 pass "print sum_array_print(10, *list1, *list2, *list3, *list4)"
275 -re ".*$gdb_prompt $" { fail "print sum_array_print(10, *list1, *list2, *list3, *list4)" }
276 timeout { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" }
281 if ![gdb_skip_stdio_test "next to 1237"] {
284 -re ".*BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*$gdb_prompt $" { pass "next to 1237"}
285 -re ".*$gdb_prompt $" { fail "next to 1237" }
286 timeout { fail "next to 1237(timeout)" }
289 gdb_test "next" "" ""
292 #call print_array_rep(\*list1, \*list2, \*list3)
294 if ![gdb_skip_stdio_test "print print_array_rep(...)"] {
295 send_gdb "print print_array_rep(\*list1, \*list2, \*list3)\n"
297 -re ".*$gdb_prompt $" {
298 pass "print print_array_rep(*list1, *list2, *list3)"
300 -re ".*$gdb_prompt $" {
301 fail "print print_array_rep(*list1, *list2, *list3)"
304 fail "(timeout) print print_array_rep(*list1, *list2, *list3)"
310 gdb_test "tbreak 1241" \
311 "Temporary breakpoint..* file .*$srcfile, line 1241.*" \
312 "tbreakpoint line 1241"
314 send_gdb "continue\n"
316 -re ".*main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*$gdb_prompt $" {
317 pass "continue to 1241"}
318 -re ".*$gdb_prompt $" { fail "continue to 1241"}
319 timeout { fail "(timeout) continue to 1241"}
324 # Run into sum_array_print, and verify that the arguments were passed
327 # Note that we shouldn't use a `step' here to get into
328 # sum_array_print; GCC may emit calls to memcpy to put the arguments
329 # in the right place, and a step may end up in memcpy instead. This
330 # may itself be a bug, but it's not the one we're trying to catch
331 # here. I've added something to step-test.exp for this.
332 gdb_test "break sum_array_print" \
333 ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \
334 "set breakpoint in sum_array_print"
335 gdb_test "continue" \
336 ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
337 "check args of sum_array_print"
339 #call print_array_rep(linked_list1, linked_list2, linked_list3)
340 # this calls works from gdb without gdb_expect. But it does seem to hang
341 #from within gdb_expect.
343 #send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n"
345 # -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" {
346 # pass "print print_array_rep(linked_list1, linked_list2, linked_list3)"
348 # -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" }
349 # timeout { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" }
354 gdb_test "tbreak 1281" \
355 "Temporary breakpoint.* file .*call-ar-st.c, line 1281.*" \
356 "tbreakpoint line 1281"
358 if ![gdb_skip_stdio_test "continuing to 1281"] {
359 send_gdb "continue\n"
361 -re "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*$gdb_prompt $" {
362 pass "continue to 1281"
364 -re ".*$gdb_prompt $" { fail "continue to 1281"}
365 timeout { fail "(timeout) continue to 1281"}
368 gdb_test "continue" "" ""
371 #call print_small_structs(*struct1, *struct2, *struct3, *struct4,
372 # *flags, *flags_combo, *three_char, *five_char,
373 # *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
375 if {![gdb_skip_float_test "print print_small_structs(...)"] && \
376 ![gdb_skip_stdio_test "print print_small_structs(...)"] } {
377 send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
378 gdb_expect_list "print print_small_structs" ".*$gdb_prompt $" {
381 "\[\t\r\n \]+epsilon"
384 "\[\t\r\n \]+epsilon"
385 "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
386 "\[\t\r\n \]+Contents of three_char_t:"
387 "\[\t\r\n \]+a[ \t]*b[ \t]*c"
388 "\[\t\r\n \]+Contents of five_char_t:"
389 "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p"
390 "\[\t\r\n \]+Contents of int_char_combo_t:"
391 "\[\t\r\n \]+123[ \t]*z"
392 "\[\t\r\n \]+Sum of the 4 struct values and seed :"
394 "\[\t\r\n \]+Contents of struct1:"
395 "\[\t\r\n \]+6[ \t]*0"
396 "\[\t\r\n \]+Contents of struct2:"
397 "\[\t\r\n \]+10[ \t]*0"
398 "\[\t\r\n \]+Contents of struct3:"
399 "\[\t\r\n \]+12[ \t]*0"
400 "\[\t\r\n \]+Contents of one_double_t:"
401 "\[\t\r\n \]+10.500000"
402 "\[\t\r\n \]+Contents of one_double_t:"
403 "\[\t\r\n \]+-3.375000"
404 "\[\t\r\n \]+Contents of one_double_t:"
405 "\[\t\r\n \]+675.093750"
406 "\[\t\r\n \]+Contents of two_floats_t:"
407 "\[\t\r\n \]+45.234001[ \t]*43.599998"
408 "\[\t\r\n \]+Contents of two_floats_t:"
409 "\[\t\r\n \]+78.010002[ \t]*122.099998"
410 "\[\t\r\n \]+Contents of two_floats_t:"
411 "\[\t\r\n \]+-1232.344971[ \t]*-199.210007"
415 #call compute_with_small_structs(20)
416 send_gdb "print compute_with_small_structs(20)\n"
418 -re ".*\[0-9\]+ =.*$gdb_prompt $" {
419 pass "print compute_with_small_structs(20)"
421 -re ".*$gdb_prompt $" { fail "print compute_with_small_structs(20)" }
422 timeout { fail "(timeout) compute_with_small_structs(20)" }
426 #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098,
427 # 3.14, -5678.12345, -0.11111111, 216.97065)
429 if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \
430 ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} {
431 send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n"
432 gdb_expect_list "print print_ten_doubles" ".*$gdb_prompt $" {
433 "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*"
434 "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*"
435 "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*"
436 "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*"
437 "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*"
442 gdb_test "tbreak 1286" \
443 "Temporary breakpoint .* file .*call-ar-st.c, line 1286.*" \
444 "tbreakpoint line 1286"
446 gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286"
448 if { [istarget "hppa*-*-hpux*"] } {
451 # the aCC demangler cannot demangle the name of a function with >10 args.
452 # so I added a .* after the name of the function, to match the
453 # incredibly long mangled name
454 # (getting aCC's libdemangle.a bundled w/ the system?)
455 # DTS CLLbs16994 coulter 990114
457 # FIXME: use step for hppa* testing for now
462 -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list"}
463 -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" }
464 timeout { fail "step into print_long_arg_list (timeout)" }
468 # We can't just assume that a "step" will get us into
469 # print_long_arg_list here,either.
470 gdb_test "tbreak print_long_arg_list" \
471 "Temporary breakpoint .* file .*call-ar-st.c, line .*" \
472 "tbreak in print_long_arg_list after stepping into memcpy"
473 # The short match case below handles cases where a buffer
474 # overflows or something, and expect can't deal with the full
475 # line. Perhaps a more elegant solution exists... -sts 1999-08-17
476 send_gdb "continue\n"
477 if {![gdb_skip_float_test "step into print_long_arg_list"]} {
479 -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { pass "step into print_long_arg_list" }
480 -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list (short match)"}
481 -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" }
482 timeout { fail "step into print_long_arg_list (timeout)" }
485 # If skipping float tests, don't expect anything in arg list.
487 -re ".*print_long_arg_list \\(.*\\).*$gdb_prompt $" { pass "step into print_long_arg_list" }
488 -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" }
489 timeout { fail "step into print_long_arg_list (timeout)" }
494 set ws "\[\n\r\t \]+"
496 #call print_small_structs(struct1, struct2, struct3, struct4, flags,
497 # flags_combo, three_char, five_char, int_char_combo,
498 # d1, d2, d3, f1, f2, f3)
500 if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \
501 ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } {
503 # On 32-bit SPARC, some of the args are passed by ref, others by
504 # value, and GDB gets confused and says "Invalid cast" because it
505 # thinks it has to cast the structure into a pointer to structure.
506 if { [test_debug_format "stabs"] } then {
507 setup_kfail "gdb/1539" "sparc-*-*"
510 send_gdb "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)\n"
511 gdb_expect_list "print print_small_structs from print_long_arg_list" ".*$gdb_prompt $" {
514 "\[\t\r\n \]+epsilon"
517 "\[\t\r\n \]+epsilon"
518 "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
519 "\[\t\r\n \]+Contents of three_char_t:"
520 "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c"
521 "\[\t\r\n \]+Contents of five_char_t:"
522 "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p"
523 "\[\t\r\n \]+Contents of int_char_combo_t:"
524 "\[\t\r\n \]+123\[ \t\]*z"
525 "\[\t\r\n \]+Sum of the 4 struct values and seed :"
527 "\[\t\r\n \]+Contents of struct1:"
528 "\[\t\r\n \]+6\[ \t\]*0"
529 "\[\t\r\n \]+Contents of struct2:"
530 "\[\t\r\n \]+10\[ \t\]*0"
531 "\[\t\r\n \]+Contents of struct3:"
532 "\[\t\r\n \]+12\[ \t\]*0"
533 "\[\t\r\n \]+Contents of one_double_t:"
534 "\[\t\r\n \]+10.500000"
535 "\[\t\r\n \]+Contents of one_double_t:"
536 "\[\t\r\n \]+-3.375000"
537 "\[\t\r\n \]+Contents of one_double_t:"
538 "\[\t\r\n \]+675.093750"
539 "\[\t\r\n \]+Contents of two_floats_t:"
540 "\[\t\r\n \]+45.234001\[ \t\]*43.599998"
541 "\[\t\r\n \]+Contents of two_floats_t:"
542 "\[\t\r\n \]+78.010002\[ \t\]*122.099998"
543 "\[\t\r\n \]+Contents of two_floats_t:"
544 "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007"
550 gdb_test "tbreak 1300" \
551 "Temporary breakpoint.* file .*call-ar-st.c, line 1300.*" \
552 "tbreakpoint line 1300"
554 if ![gdb_skip_stdio_test "continuing to 1300"] {
555 gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
558 gdb_test "continue" "" ""
565 init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;.*$gdb_prompt $" {
566 pass "step into init_bit_flags_combo"}
567 -re ".*$gdb_prompt $" { fail "step into init_bit_flags_combo" }
568 timeout { fail "step into init_bit_flags_combo (timeout)" }
571 #call print_bit_flags_combo(*bit_flags_combo)
572 if ![gdb_skip_stdio_test "continuing to 1300"] {
573 send_gdb "print print_bit_flags_combo(*bit_flags_combo)\n"
575 -re ".*alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*$gdb_prompt $" {
576 pass "print print_bit_flags_combo from init_bit_flags_combo"
578 -re ".*$gdb_prompt $" {
579 fail "print print_bit_flags_combo from init_bit_flags_combo"
582 fail "(timeout) print_bit_flags_combo from init_bit_flags_combo"
589 gdb_test "tbreak 1305" \
590 "Temporary breakpoint.* file .*call-ar-st.c, line 1305.*" \
591 "tbreakpoint line 1305"
593 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
596 #call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
599 # HP aCC demangler currently does not handle hp aCC functions with >10 args
600 # DTS CLLbs16994 coulter 990114
602 if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
604 if {![gdb_skip_float_test "print print_long_arg_list"] && \
605 ![gdb_skip_stdio_test "print print_long_arg_list"] } {
606 send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
607 gdb_expect_list "print print_long_arg_list" ".*$gdb_prompt $" {
608 "\[ \n\r\t\]+double : 22.250000"
609 "\[ \n\r\t\]+double : 33.375000"
610 "\[ \n\r\t\]+int : 0"
611 "\[ \n\r\t\]+int : -25"
612 "\[ \n\r\t\]+int : 100"
613 "\[ \n\r\t\]+int : 2345"
616 "\[ \n\r\t\]+epsilon"
617 "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n"
618 "\[ \n\r\t\]+Contents of three_char_t:"
619 "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z"
620 "\[ \n\r\t\]+Contents of five_char_t:"
621 "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o"
622 "\[ \n\r\t\]+Contents of int_char_combo_t:"
623 "\[ \n\r\t\]+123\[ \t\]+z"
624 "\[ \n\r\t\]+Sum of the 4 struct values and seed :"
626 "\[ \n\r\t\]+Contents of struct1:"
627 "\[ \n\r\t\]+6\[ \t\]+0"
628 "\[ \n\r\t\]+Contents of struct2:"
629 "\[ \n\r\t\]+10\[ \t\]+0"
630 "\[ \n\r\t\]+Contents of struct3:"
631 "\[ \n\r\t\]+12\[ \t\]+0"
632 "\[ \n\r\t\]+Contents of one_double_t:"
633 "\[ \n\r\t\]+1.111110"
634 "\[ \n\r\t\]+Contents of one_double_t:"
635 "\[ \n\r\t\]+-345.340000"
636 "\[ \n\r\t\]+Contents of one_double_t:"
637 "\[ \n\r\t\]+546464.200000"
638 "\[ \n\r\t\]+Contents of two_floats_t:"
639 "\[ \n\r\t\]+0.234000\[ \t\]+453.100006"
640 "\[ \n\r\t\]+Contents of two_floats_t:"
641 "\[ \n\r\t\]+78.345001\[ \t\]+23.090000"
642 "\[ \n\r\t\]+Contents of two_floats_t:"
643 "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000"
649 gdb_test "tbreak 1311" \
650 "Temporary breakpoint.* file .*call-ar-st.c, line 1311.*" \
651 "tbreakpoint line 1311"
653 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \
657 #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
658 if ![gdb_skip_stdio_test "print sum_struct_print(...)"] {
659 send_gdb "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)\n"
661 -re ".*Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*$gdb_prompt $" {
662 pass "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
664 -re ".*$gdb_prompt $" {
665 fail "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
668 fail "(timeout) sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
674 #call print_struct_rep(*struct1, *struct2, *struct3)
675 if ![gdb_skip_stdio_test "print print_struct_rep(...)"] {
676 send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n"
677 gdb_expect_list "print print_struct_rep(*struct1, *struct2, *struct3)" \
679 "\[ \t\n\r\]+Contents of struct1:"
681 "\[ \t\n\r\]+Contents of struct2:"
683 "\[ \t\n\r\]+Contents of struct3:"
688 if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
689 send_gdb "print print_one_large_struct(*list1)\n"
691 -re ".* 4 1.*$gdb_prompt $" {
692 pass "print print_one_large_struct(*list1)"
694 -re ".*$gdb_prompt $" {
695 fail "print print_one_large_struct(*list1)"
698 fail "(timeout) print_one_large_struct(*list1)"
703 set timeout $oldtimeout