1 # Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
2 # Free Software Foundation, Inc.
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 2 of the License, or
7 # (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 # Please email any bugs, comments, and/or additions to this file to:
19 # bug-gdb@prep.ai.mit.edu
21 # This file was written by Fred Fish. (fnf@cygnus.com)
22 # and modified by Bob Manson. (manson@cygnus.com)
31 set testfile "callfuncs"
32 set srcfile ${testfile}.c
33 set binfile ${objdir}/${subdir}/${testfile}
35 if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
36 gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
39 # Create and source the file that provides information about the compiler
40 # used to compile the test case.
42 if [get_compiler_info ${binfile}] {
46 if {$hp_aCC_compiler} {
52 # The a29k can't call functions, so don't even bother with this test.
53 if [target_info exists gdb,cannot_call_functions] {
54 setup_xfail "*-*-*" 2416
55 fail "This target can not call functions"
59 # Set the current language to C. This counts as a test. If it
60 # fails, then we skip the other tests.
65 send_gdb "set language c\n"
67 -re ".*$gdb_prompt $" {}
68 timeout { fail "set language c (timeout)" ; return 0; }
71 send_gdb "show language\n"
73 -re ".* source language is \"c\".*$gdb_prompt $" {
74 pass "set language to \"c\""
77 -re ".*$gdb_prompt $" {
78 fail "setting language to \"c\""
82 fail "can't show language (timeout)"
88 # FIXME: Before calling this proc, we should probably verify that
89 # we can call inferior functions and get a valid integral value
91 # Note that it is OK to check for 0 or 1 as the returned values, because C
92 # specifies that the numeric value of a relational or logical expression
93 # (computed in the inferior) is 1 for true and 0 for false.
95 proc do_function_calls {} {
100 # We need to up this because this can be really slow on some boards.
103 gdb_test "p t_char_values(0,0)" " = 0"
104 gdb_test "p t_char_values('a','b')" " = 1"
105 gdb_test "p t_char_values(char_val1,char_val2)" " = 1"
106 gdb_test "p t_char_values('a',char_val2)" " = 1"
107 gdb_test "p t_char_values(char_val1,'b')" " = 1"
109 gdb_test "p t_short_values(0,0)" " = 0"
110 gdb_test "p t_short_values(10,-23)" " = 1"
111 gdb_test "p t_short_values(short_val1,short_val2)" " = 1"
112 gdb_test "p t_short_values(10,short_val2)" " = 1"
113 gdb_test "p t_short_values(short_val1,-23)" " = 1"
115 gdb_test "p t_int_values(0,0)" " = 0"
116 gdb_test "p t_int_values(87,-26)" " = 1"
117 gdb_test "p t_int_values(int_val1,int_val2)" " = 1"
118 gdb_test "p t_int_values(87,int_val2)" " = 1"
119 gdb_test "p t_int_values(int_val1,-26)" " = 1"
121 gdb_test "p t_long_values(0,0)" " = 0"
122 gdb_test "p t_long_values(789,-321)" " = 1"
123 gdb_test "p t_long_values(long_val1,long_val2)" " = 1"
124 gdb_test "p t_long_values(789,long_val2)" " = 1"
125 gdb_test "p t_long_values(long_val1,-321)" " = 1"
127 if ![target_info exists gdb,skip_float_tests] {
128 gdb_test "p t_float_values(0.0,0.0)" " = 0"
130 # These next four tests fail on the mn10300.
131 # The first value is passed in regs, the other in memory.
132 # Gcc emits different stabs for the two parameters; the first is
133 # claimed to be a float, the second a double.
134 # dbxout.c in gcc claims this is the desired behavior.
135 setup_xfail "mn10300-*-*"
136 gdb_test "p t_float_values(3.14159,-2.3765)" " = 1"
137 setup_xfail "mn10300-*-*"
138 gdb_test "p t_float_values(float_val1,float_val2)" " = 1"
139 setup_xfail "mn10300-*-*"
140 gdb_test "p t_float_values(3.14159,float_val2)" " = 1"
141 setup_xfail "mn10300-*-*"
142 gdb_test "p t_float_values(float_val1,-2.3765)" " = 1"
144 # Test passing of arguments which might not be widened.
145 gdb_test "p t_float_values2(0.0,0.0)" " = 0"
147 # Although PR 5318 mentions SunOS specifically, this seems
148 # to be a generic problem on quite a few platforms.
149 if $prototypes then {
150 setup_xfail "sparc-*-*" "mips*-*-*" 5318
151 if {!$gcc_compiled} then {
152 setup_xfail "alpha-dec-osf2*" "i*86-*-sysv4*" 5318
155 gdb_test "p t_float_values2(3.14159,float_val2)" " = 1"
156 gdb_test "p t_small_values(1,2,3,4,5,6,7,8,9,10)" " = 55"
158 gdb_test "p t_double_values(0.0,0.0)" " = 0"
159 gdb_test "p t_double_values(45.654,-67.66)" " = 1"
160 gdb_test "p t_double_values(double_val1,double_val2)" " = 1"
161 gdb_test "p t_double_values(45.654,double_val2)" " = 1"
162 gdb_test "p t_double_values(double_val1,-67.66)" " = 1"
165 gdb_test "p t_string_values(string_val2,string_val1)" " = 0"
166 gdb_test "p t_string_values(string_val1,string_val2)" " = 1"
167 gdb_test "p t_string_values(\"string 1\",\"string 2\")" " = 1"
168 gdb_test "p t_string_values(\"string 1\",string_val2)" " = 1"
169 gdb_test "p t_string_values(string_val1,\"string 2\")" " = 1"
171 gdb_test "p t_char_array_values(char_array_val2,char_array_val1)" " = 0"
172 gdb_test "p t_char_array_values(char_array_val1,char_array_val2)" " = 1"
173 gdb_test "p t_char_array_values(\"carray 1\",\"carray 2\")" " = 1"
174 gdb_test "p t_char_array_values(\"carray 1\",char_array_val2)" " = 1"
175 gdb_test "p t_char_array_values(char_array_val1,\"carray 2\")" " = 1"
177 gdb_test "p doubleit(4)" " = 8"
178 gdb_test "p add(4,5)" " = 9"
179 gdb_test "p t_func_values(func_val2,func_val1)" " = 0"
180 gdb_test "p t_func_values(func_val1,func_val2)" " = 1"
182 # On the rs6000, we need to pass the address of the trampoline routine,
183 # not the address of add itself. I don't know how to go from add to
184 # the address of the trampoline. Similar problems exist on the HPPA,
185 # and in fact can present an unsolvable problem as the stubs may not
186 # even exist in the user's program. We've slightly recoded t_func_values
187 # to avoid such problems in the common case. This may or may not help
189 setup_xfail "rs6000*-*-*"
190 setup_xfail "powerpc*-*-*"
191 if {![istarget hppa*-*-hpux*]} then {
192 gdb_test "p t_func_values(add,func_val2)" " = 1"
195 setup_xfail "rs6000*-*-*"
196 setup_xfail "powerpc*-*-*"
197 if {![istarget hppa*-*-hpux*]} then {
198 gdb_test "p t_func_values(func_val1,doubleit)" " = 1"
201 setup_xfail "rs6000*-*-*"
202 setup_xfail "powerpc*-*-*"
203 if {![istarget hppa*-*-hpux*]} then {
204 gdb_test "p t_call_add(add,3,4)" " = 7"
206 gdb_test "p t_call_add(func_val1,3,4)" " = 7"
208 gdb_test "p t_enum_value1(enumval1)" " = 1"
209 gdb_test "p t_enum_value1(enum_val1)" " = 1"
210 gdb_test "p t_enum_value1(enum_val2)" " = 0"
212 gdb_test "p t_enum_value2(enumval2)" " = 1"
213 gdb_test "p t_enum_value2(enum_val2)" " = 1"
214 gdb_test "p t_enum_value2(enum_val1)" " = 0"
216 gdb_test "p sum_args(1,{2})" " = 2"
217 gdb_test "p sum_args(2,{2,3})" " = 5"
218 gdb_test "p sum_args(3,{2,3,4})" " = 9"
219 gdb_test "p sum_args(4,{2,3,4,5})" " = 14"
221 gdb_test "p sum10 (1, 2, 3, 4, 5, 6, 7, 8, 9, 10)" " = 55"
223 gdb_test "p cmp10 (0, 1, 2, 3, 4, 5, 6, 7, 8, 9)" " = 1"
225 gdb_test "p t_structs_c(struct_val1)" "= 120 'x'" \
226 "call inferior func with struct - returns char"
227 gdb_test "p t_structs_s(struct_val1)" "= 87" \
228 "call inferior func with struct - returns short"
229 gdb_test "p t_structs_i(struct_val1)" "= 76" \
230 "call inferior func with struct - returns int"
231 gdb_test "p t_structs_l(struct_val1)" "= 51" \
232 "call inferior func with struct - returns long"
233 gdb_test "p t_structs_f(struct_val1)" "= 2.12.*" \
234 "call inferior func with struct - returns float"
235 gdb_test "p t_structs_d(struct_val1)" "= 9.87.*" \
236 "call inferior func with struct - returns double"
237 gdb_test "p t_structs_a(struct_val1)" "= (.unsigned char .. )?\"foo\"" \
238 "call inferior func with struct - returns char *"
241 # Procedure to get current content of all registers.
242 global all_registers_content
243 set all_registers_content ""
244 proc do_get_all_registers { } {
247 global all_registers_content
249 set all_registers_content ""
250 send_gdb "info all-registers\n"
252 -re "info all-registers\r\n(.*)$gdb_prompt $" {
253 set all_registers_content $expect_out(1,string)
259 # Start with a fresh gdb.
263 gdb_reinitialize_dir $srcdir/$subdir
266 gdb_test "set print sevenbit-strings" ""
267 gdb_test "set print address off" ""
268 gdb_test "set width 0" ""
270 if { $hp_aCC_compiler } {
271 # Do not set language explicitly to 'C'. This will cause aCC
272 # tests to fail because promotion rules are different. Just let
273 # the language be set to the default.
275 if { ![runto_main] } {
279 # However, turn off overload-resolution for aCC. Having it on causes
282 gdb_test "set overload-resolution 0" ".*"
284 if { ![set_lang_c] } {
287 if { ![runto_main] } {
293 # Make sure that malloc gets called and that the floating point unit
294 # is initialized via a call to t_double_values.
295 gdb_test "next" "t_double_values\\(double_val1, double_val2\\);.*"
296 gdb_test "next" "t_structs_c\\(struct_val1\\);.*"
298 # Save all register contents.
300 set old_reg_content $all_registers_content
302 # Perform function calls.
305 # Check if all registers still have the same value.
307 set new_reg_content $all_registers_content
308 if ![string compare $old_reg_content $new_reg_content] then {
309 pass "gdb function calls preserve register contents"
311 set old_reg_content $all_registers_content
312 fail "gdb function calls preserve register contents"
315 # Set breakpoint at a function we will call from gdb.
318 # Call function (causing a breakpoint hit in the call dummy) and do a continue,
319 # make sure we are back at main and still have the same register contents.
320 gdb_test "print add(4,5)" "The program being debugged stopped while.*" ""
321 gdb_test "continue" "Continuing.*" "continue from call dummy breakpoint"
322 if ![gdb_test "bt 2" \
324 "bt after continuing from call dummy breakpoint"] then {
326 set new_reg_content $all_registers_content
327 if ![string compare $old_reg_content $new_reg_content] then {
328 pass "continue after stop in call dummy preserves register contents"
330 fail "continue after stop in call dummy preserves register contents"
334 # Call function (causing a breakpoint hit in the call dummy) and do a finish,
335 # make sure we are back at main and still have the same register contents.
336 gdb_test "print add(4,5)" "The program being debugged stopped while.*" ""
338 "Value returned is .* = 9" \
339 "finish from call dummy breakpoint returns correct value"
340 if ![gdb_test "bt 2" \
342 "bt after finishing from call dummy breakpoint"] then {
344 set new_reg_content $all_registers_content
345 if ![string compare $old_reg_content $new_reg_content] then {
346 pass "finish after stop in call dummy preserves register contents"
348 fail "finish after stop in call dummy preserves register contents"
352 # Call function (causing a breakpoint hit in the call dummy) and do a return
353 # with a value, make sure we are back at main with the same register contents.
354 gdb_test "print add(4,5)" "The program being debugged stopped while.*" ""
355 if ![gdb_test "return 7" \
357 "back at main after return from call dummy breakpoint" \
358 "Make add return now. .y or n.*" \
361 set new_reg_content $all_registers_content
362 if ![string compare $old_reg_content $new_reg_content] then {
363 pass "return after stop in call dummy preserves register contents"
365 fail "return after stop in call dummy preserves register contents"