1 # Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
2 # 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010
3 # Free Software Foundation, Inc.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Start with a fresh gdb
23 set prev_timeout $timeout
27 # test default actions of gdb commands
32 gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file"
35 gdb_test "append" "\"append\" must be followed by a subcommand\.\[\r\n\]+List of append subcommands:.*"
36 gdb_test "append binary" "\"append binary\" must be followed by a subcommand\.\[\r\n\]+List of append binary subcommands:.*"
37 gdb_test "append memory" "Missing filename\."
38 gdb_test "append value" "Missing filename\."
39 gdb_test "append binary memory" "Missing filename\."
40 gdb_test "append binary value" "Missing filename\."
42 setup_xfail "mips-idt-*"
43 gdb_test_multiple "attach" "attach" {
44 -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
46 -re "You can't do that when your target is `None'.*$gdb_prompt $"\
48 -re "You can't do that without a process to debug.*$gdb_prompt $"\
50 -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\
52 -re "Kill it. .y or n." {
58 if ![target_info exists use_gdb_stub] {
59 gdb_test "break" "No default breakpoint address now." "break"
60 foreach i "b br bre brea" {
61 gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation"
65 setup_xfail "mips-idt-*"
66 gdb_test "backtrace" "No stack."
68 # ba and bac are no longer unique command prefixes. So these tests
69 # elict an error from GDB.
70 # GDB needs to be fixed to map unique alias here for ba bac.
72 foreach i "bt ba bac" {
73 setup_xfail "mips-idt-*"
74 gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
77 warning "Skipping backtrace and break tests because of GDB stub."
80 # This works on the MIPS IDT board, but confuses future tests.
81 if ![istarget "mips-idt-*"] then {
82 gdb_test "continue" "The program is not being run." "continue"
83 gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
87 gdb_test "call" "The history is empty..*" "call"
91 gdb_test "catch" "Catch requires an event name..*" "catch"
94 gdb_test "cd" "Argument required .new working directory.*" "cd"
97 gdb_test "clear" "No source file specified..*" "clear"
100 gdb_test "commands" "Argument required .one or more breakpoint numbers...*" "commands"
103 gdb_test "condition" "Argument required .breakpoint number.*" "condition"
106 gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file"
107 #test delete "d" abbreviation
108 gdb_test_no_output "d" "delete \"d\" abbreviation"
110 gdb_test_no_output "delete" "delete"
112 gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define"
113 #test delete breakpoints
114 gdb_test_no_output "delete breakpoints" "delete breakpoints"
116 # FIXME -- need to dump full output to detailed log
118 gdb_test "delete display" \
120 "delete display prompt" \
121 "Delete all auto-display expressions.*y or n. $" \
126 gdb_test "detach" ".*" "detach"
128 if [istarget "h8300-*-hms"] then {
134 # FIXME -- need to dump full output to detailed log
136 gdb_test "directory" \
137 "Source directories searched: .cdir\[:;\].cwd.*" \
139 "Reinitialize source path to empty.*y or n. $" \
142 #test disable "dis" abbreviation
143 gdb_test_no_output "dis" "disable \"dis\" abbreviation"
144 #test disable "disa" abbreviation
145 gdb_test_no_output "disa" "disable \"disa\" abbreviation"
147 gdb_test_no_output "disable" "disable"
148 #test disable breakpoints
149 gdb_test_no_output "disable breakpoints" "disable breakpoints"
150 #test disable display
151 gdb_test_no_output "disable display" "disable display"
153 gdb_test "disassemble" "No frame selected." "disassemble"
155 gdb_test_no_output "display" "display"
157 gdb_test "do" "No stack." "do"
159 gdb_test "document" "Argument required .name of command to define.*" "document"
161 gdb_test "down" "No stack.*" "down"
163 gdb_test "down-silently" "No stack." "down-silently"
165 gdb_test "dump" "\"dump\" must be followed by a subcommand\.\[\r\n\]+List of dump subcommands:.*"
166 gdb_test "dump binary" "\"dump binary\" must be followed by a subcommand\.\[\r\n\]+List of dump binary subcommands:.*"
167 gdb_test "dump ihex" "\"dump ihex\" must be followed by a subcommand\.\[\r\n\]+List of dump ihex subcommands:.*"
168 gdb_test "dump memory" "Missing filename\."
169 gdb_test "dump srec" "\"dump srec\" must be followed by a subcommand\.\[\r\n\]+List of dump srec subcommands:.*"
170 gdb_test "dump tekhex" "\"dump tekhex\" must be followed by a subcommand\.\[\r\n\]+List of dump tekhex subcommands:.*"
171 gdb_test "dump value" "Missing filename\."
172 gdb_test "dump binary memory" "Missing filename\."
173 gdb_test "dump binary value" "Missing filename\."
174 gdb_test "dump ihex memory" "Missing filename\."
175 gdb_test "dump ihex value" "Missing filename\."
176 gdb_test "dump srec memory" "Missing filename\."
177 gdb_test "dump srec value" "Missing filename\."
178 gdb_test "dump tekhex memory" "Missing filename\."
179 gdb_test "dump tekhex value" "Missing filename\."
181 gdb_test_no_output "echo" "echo"
182 #test enable breakpoints delete
183 gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete"
184 #test enable breakpoints once
185 gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once"
186 #test enable breakpoints
187 gdb_test_no_output "enable breakpoints" "enable breakpoints"
189 gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete"
191 gdb_test_no_output "enable display" "enable display"
193 gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once"
195 gdb_test_no_output "enable" "enable"
197 send_gdb "exec-file\n"
199 -re "No executable file now..*$gdb_prompt $" {
202 -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" {
205 send_user "\tDidn't kill program being debugged\n"
207 gdb_expect -re "$gdb_prompt $" { }
210 -re "$gdb_prompt $" { fail "exec-file" }
211 timeout { fail "(timeout) exec-file" }
214 #test frame "f" abbreviation
215 gdb_test "f" "No stack." "frame \"f\" abbreviation"
217 gdb_test "frame" "No stack." "frame"
219 gdb_test "fg" "The program is not being run." "fg"
220 # FIXME: fg kills the udi connection
224 -re "No executable file now..*$gdb_prompt $"\
226 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
229 send_user "\t\tDidn't kill program being debugged\n"
231 gdb_expect -re "$gdb_prompt $" { }
234 -re ".*$gdb_prompt $" { fail "file" }
235 timeout { fail "(timeout) file" }
239 gdb_test "finish" "The program is not being run." "finish"
241 # The message here comes from the regexp library, not gdb, and so can
242 # vary on different systems.
243 gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search"
246 gdb_test_multiple "gcore" "gcore" {
247 -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
250 -re "Undefined command: .*$gdb_prompt $" {
255 gdb_test_multiple "generate-core-file" "generate-core-file" {
256 -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
257 pass "generate-core-file"
259 -re "Undefined command: .*$gdb_prompt $" {
260 pass "generate-core-file"
264 #test help "h" abbreviation
265 gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation"
267 gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help"
269 gdb_test "handle" "Argument required .signal to handle.*" "handle"
270 #test info "i" abbreviation
271 gdb_test "i" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation"
273 gdb_test "info" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info"
275 gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore"
277 gdb_test "info address" "Argument required." "info address"
278 #test info all-registers
279 gdb_test "info all-registers" "The program has no registers now." "info all-registers"
281 gdb_test "info args" "No frame selected." "info args"
282 #test info bogus-gdb-command
283 gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" "info bogus-gdb-command"
284 #test info breakpoints
285 gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints"
287 gdb_test "info catch" "No frame selected." "info catch"
289 # FIXME -- doesn't work worth a shit
290 #send_gdb "info copying"
291 # -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."#
292 gdb_test "info copying"
297 gdb_test "info display" "There are no auto-display expressions now." "info display"
298 #test info frame "f" abbreviation
299 gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation"
301 gdb_test "info frame" "No stack.|No selected frame." "info frame"
303 gdb_test_no_output "info files" "info files"
305 gdb_test "info float" "The program has no registers now." "info float"
307 gdb_test "info functions" "All defined functions:" "info functions"
309 gdb_test "info locals" "No frame selected." "info locals"
311 gdb_test "info program" "The program being debugged is not being run." "info program"
313 gdb_test "info registers" "The program has no registers now." "info registers"
314 #test info stack "s" abbreviation
315 gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
317 gdb_test "info stack" "No stack." "info stack"
319 # FIXME -- needs to match the entire output
320 # FIXME -- on native solaris 2.8, this test fails due to this line:
321 # prompt: Gdb's prompt is "(gdb) ".^M
322 gdb_test "info set" "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename: The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize: Number of source lines gdb will list by default is 10.*" "info set"
323 gdb_test "info symbol" "Argument required .address.."
325 gdb_test "info source" "No current source file..*" "info source"
327 gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources"
329 gdb_test_no_output "info target" "info target"
331 gdb_test "info terminal" "No saved terminal information." "info terminal"
333 gdb_test "info types" "All defined types:" "info types"
335 gdb_test "info variables" "All defined variables:" "info variables"
337 gdb_test "info vector" "The program has no registers now." "info vector"
339 gdb_test "info warranty" "15. *Disclaimer of Warranty.*" "info warranty"
340 #test info watchpoints
341 gdb_test "info watchpoints" "No watchpoints." "info watchpoints"
343 gdb_test "inspect" "The history is empty." "inspect"
345 gdb_test "jump" "The program is not being run." "jump"
347 gdb_test "kill" "The program is not being run." "kill"
348 #test list "l" abbreviation
349 gdb_test "l" "No symbol table is loaded. Use the \"file\" command.*" "list \"l\" abbreviation"
351 gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" "list"
353 # The ``takes a file name'' case is for vxgdb.
354 # The ``Use the "file" command'' case is for newer GDB versions which try
355 # to deduce the filename from the exec file.
356 gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
357 #test next "n" abbreviation
358 gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
360 gdb_test "next" "The program is not being run." "next"
361 #test nexti "ni" abbreviation
362 gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
364 gdb_test "nexti" "The program is not being run." "nexti"
366 gdb_test "output" "Argument required .expression to compute.*" "output"
369 gdb_test "overlay" "\"overlay\" must be followed by the name of .*"
370 #test a non-existant overlay subcommand
371 gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"."
372 gdb_test_no_output "overlay manual" "overlay manual #1"
373 gdb_test_no_output "overlay auto"
374 gdb_test_no_output "overlay off"
375 gdb_test "overlay list" "No sections are mapped."
376 gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1"
377 gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1"
378 gdb_test_no_output "overlay manual" "overlay manual #2"
379 gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2"
380 gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2"
382 #test print "p" abbreviation
383 gdb_test "p" "The history is empty." "print \"p\" abbreviation"
385 gdb_test "print" "The history is empty." "print"
387 gdb_test "printf" "Argument required .format-control string and values to print.*" "printf"
389 gdb_test "ptype" "The history is empty." "ptype"
391 gdb_test "pwd" "Working directory .*" "pwd"
393 #test run "r" abbreviation
394 if [istarget "*-*-vxworks*"] then {
395 gdb_test "set args" ".*" ""
397 gdb_test "r" "Starting program: .*
398 You must specify a function name to run, and arguments if any"\
399 "run \"r\" abbreviation"
400 gdb_test "set args main" ".*" ""
403 gdb_test_multiple "r" "run \"r\" abbreviation" {
404 -re "Starting program: .*You can't do that when your target is `None'.*$gdb_prompt $"\
405 { pass "run \"r\" abbreviation" }
406 -re "Starting program: .*No executable file specified.*Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
407 { pass "run \"r\" abbreviation" }
408 -re "Starting program: .*No executable specified, use .target exec.\\..*$gdb_prompt $"\
409 { pass "run \"r\" abbreviation" }
410 -re "Starting program: .*No image loaded into target.*$gdb_prompt $"\
411 { pass "run \"r\" abbreviation" }
412 -re "Starting program: .*No program loaded.*$gdb_prompt $"\
413 { pass "run \"r\" abbreviation" }
414 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\
415 { pass "run \"r\" abbreviation" }
420 if [istarget "*-*-vxworks*"] then {
421 gdb_test "set args" ".*" ""
423 gdb_test "run" "Starting program: .*
424 You must specify a function name to run, and arguments if any"
425 gdb_test "set args main" ".*" ""
428 gdb_test_multiple "run" "run" {
429 -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $"\
431 -re "Starting program: .*No executable file specified.*Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
433 -re "Starting program: .*No executable specified, use .target exec.\\..*$gdb_prompt $"\
435 -re "Starting program: .*No image loaded into target.*$gdb_prompt $"\
437 -re "Starting program: .*No program loaded.*$gdb_prompt $"\
439 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\
445 gdb_test "rbreak" "rbreak"
448 gdb_test "restore" "You can't do that without a process to debug\."
451 # The middle case accomodated the obsolete a29k, where doing the "ni"
452 # above causes an initial stack to be created.
453 gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y"
457 gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
458 #test step "s" abbreviation
459 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
461 gdb_test "step" "The program is not being run." "step #1"
463 gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
465 gdb_test "section" "Must specify section name and its virtual address.*" "section"
467 gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate"
469 gdb_test_no_output "set args" "set args"
470 #test set check "c" abbreviation
471 gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation"
472 #test set check "ch" abbreviation
473 gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation"
475 gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check"
476 #test set check range
477 gdb_test "set check range" ".*" "set check range"
479 gdb_test "set check type" ".*" "set check type"
481 gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints"
483 gdb_test_no_output "set confirm" "set confirm"
484 # Don't test set editing. What if we're talking to a gdb that
485 # won't do editing correctly while we're talking to it?
486 # gdb_test "set editing" "" "set editing"
488 #test set environment
489 gdb_test "set environment" "Argument required .environment variable and value.*" "set environment"
491 gdb_test "set height" "Argument required .integer to set it to.*" "set height"
492 #test set history expansion
493 gdb_test_no_output "set history expansion" "set history expansion"
494 #test set history filename
495 gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename"
496 #test set history save
497 gdb_test_no_output "set history save" "set history save"
498 #test set history size
499 gdb_test "set history size" "Argument required .integer to set it to.*" "set history size"
501 gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand.(\[^\r\n\]*\[\r\n\])+List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set history"
503 gdb_test "set language" "Requires an argument. Valid arguments are auto, local, unknown, ada, c, c.., asm, minimal, d, fortran, objective-c, java, modula-2, pascal, scheme." "set language"
505 gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize"
506 #test set print "p" abbreviation
507 gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation"
508 #test set print "pr" abbreviation
509 gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation"
511 gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print"
512 #test set print address
513 gdb_test_no_output "set print address" "set print address"
514 #test set print array
515 gdb_test_no_output "set print array" "set print array"
516 #test set print asm-demangle
517 gdb_test_no_output "set print asm-demangle" "set print asm-demangle"
518 #test set print demangle
519 gdb_test_no_output "set print demangle" "set print demangle"
520 #test set print elements
521 gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements"
522 #test set print object
523 gdb_test_no_output "set print object" "set print object"
524 #test set print pretty
525 gdb_test_no_output "set print pretty" "set print pretty"
526 #test set print sevenbit-strings
527 gdb_test_no_output "set print sevenbit-strings" "set print sevenbit-strings"
528 #test set print union
529 gdb_test_no_output "set print union" "set print union"
531 gdb_test_no_output "set print vtbl" "set print vtbl"
532 # FIXME -- need a test for "set prompt"
534 gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix"
535 #test set symbol-reloading
536 gdb_test_no_output "set symbol-reloading" "set symbol-reloading"
538 gdb_test "set variable" "Argument required .expression to compute.*" "set variable"
540 gdb_test_no_output "set verbose" "set verbose"
542 gdb_test "set width" "Argument required .integer to set it to.*" "set width"
544 # This is only supported on targets which use exec.o.
545 gdb_test_no_output "set write" "set write"
547 gdb_test "set" "Argument required .expression to compute.*" "set"
548 #test shell echo Hi dad!
549 gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!"
551 gdb_test "show annotate" "Annotation_level is 0." "show annotate"
553 gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args"
554 #test show check "c" abbreviation
555 gdb_test "show c" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation"
556 #test show check "ch" abbreviation
557 gdb_test "show ch" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation"
559 gdb_test "show check" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check"
560 #test show check range
561 gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range"
562 #test show check type
563 gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type"
565 gdb_test "show commands" ".*" "show commands"
566 #test show complaints
567 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints"
569 gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm"
570 #test show convenience
571 gdb_test "show convenience" "\\\$_siginfo = void" "show convenience"
572 #test show directories
573 gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" "show directories"
575 gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing"
577 gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height"
578 #test show history expansion
579 gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion"
580 #test show history filename
581 gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename"
582 #test show history save
583 gdb_test "show history save" "Saving of the history record on exit is on." "show history save"
584 #test show history size
585 gdb_test "show history size" "The size of the command history is.*" "show history size"
587 gdb_test "show history" "expansion: *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+filename: *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+size: * The size of the command history is.*" "show history"
589 gdb_test "show language" "The current source language is \"auto; currently c\"." "show language"
591 gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize"
592 #test show print "p" abbreviation
593 gdb_test "show p" ".*" "show p"
594 #test show print "pr" abbreviation
595 gdb_test "show pr" ".*" "show pr"
597 gdb_test "show print" ".*" "show print"
599 gdb_test "show paths" "Executable and object file path:.*" "show paths"
600 #test show print address
601 gdb_test "show print address" "Printing of addresses is on." "show print address"
602 #test show print array
603 gdb_test "show print array" "Prettyprinting of arrays is on." "show print array"
604 #test show print asm-demangle
605 gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." "show print asm-demangle"
606 #test show print demangle
607 gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." "show print demangle"
608 #test show print elements
609 gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements"
610 #test show print object
611 gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object"
612 #test show print pretty
613 gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty"
614 #test show print sevenbit-strings
615 gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings"
616 #test show print union
617 gdb_test "show print union" "Printing of unions interior to structures is on." "show print union"
618 #test show print vtbl
619 gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl"
621 # In the FAIL case, can't just look for $gdb_prompt because that will match
622 # the output, rather than the prompt. So look for $gdb_prompt at the start
624 gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt"
626 gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix"
627 #test show symbol-reloading
628 gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading"
630 gdb_test_no_output "show user" "show user"
632 gdb_test_no_output "show values" "show values"
634 gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose"
636 gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>(\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"(\[^\r\n\]*\[\r\n\])+and \"show warranty\" for details..*" "show version"
638 gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width"
640 # This is only supported on targets which use exec.o.
641 gdb_test "show write" "Writing into executable and core files is o.*" "show write"
643 gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200..*" "show"
644 #test stepi "si" abbreviation
645 gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation"
647 gdb_test "stepi" "The program is not being run." "stepi"
649 gdb_test "signal" "The program is not being run." "signal"
651 gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" "source"
652 #test step "s" abbreviation
653 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
655 gdb_test "step" "The program is not being run." "step #2"
657 gdb_test "symbol-file" ".*" "symbol-file"
660 gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\". *Try \"help target\".*" "target child"
663 gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\". *Try \"help target\".*" "target procfs"
666 send_gdb "target core\n"
668 -re "No core file specified..*$gdb_prompt $" { pass "target core" }
669 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
672 send_user "\t\tDidn't kill program being debugged\n"
674 gdb_expect -re "$gdb_prompt $" { }
677 -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" }
678 -re ".*$gdb_prompt $" { fail "target core" }
679 timeout { fail "(timeout) target core" }
683 send_gdb "target exec\n"
685 -re "No executable file now..*$gdb_prompt $"\
686 { pass "target exec" }
687 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
690 send_user "\t\tDidn't kill program being debugged\n"
692 gdb_expect -re "$gdb_prompt $" { }
695 -re ".*$gdb_prompt $" { fail "target exec" }
696 timeout { fail "(timeout) target exec" }
700 if ![istarget "*-*-udi*"] then {
701 send_gdb "target remote\n"
703 -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\
704 { pass "target remote" }
705 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
708 send_user "\t\tDidn't kill program being debugged\n"
710 gdb_expect -re "$gdb_prompt $" { }
713 -re ".*$gdb_prompt $" { fail "target remote" }
714 timeout { fail "(timeout) target remote" }
719 gdb_test "target" "Argument required .target name.*" "target"
721 gdb_test "tbreak" "No default breakpoint address now." "tbreak"
723 gdb_test "tty" "Argument required .filename to set it to\..*" "tty"
724 #test until "u" abbreviation
725 gdb_test "u" "The program is not being run." "until \"u\" abbreviation"
727 gdb_test "until" "The program is not being run." "until"
729 # FIXME -- need to dump full output to detailed log
731 gdb_test "undisplay" \
734 "Delete all auto-display expressions.*y or n. $" \
737 #test unset environment
739 gdb_test "unset environment" \
741 "unset environment prompt" \
742 "Delete all environment variables?.*y or n. $" \
746 gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand.(\[^\r\n\]*\[\r\n\])+List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "unset"
749 gdb_test "up-silently" "No stack." "up-silently"
751 gdb_test "watch" "Argument required .expression to compute.*" "watch"
753 gdb_test "whatis" "The history is empty." "whatis"
755 gdb_test "where" "No stack." "where"
757 gdb_test "x" "Argument required .starting display address.*" "x"
761 set timeout $prev_timeout