gdb/testsuite/gdb.base/default.exp

   1 #   Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
   2 #   2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010
   3 #   Free Software Foundation, Inc.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  17
  18 # Start with a fresh gdb
  19
  20 gdb_exit
  21 gdb_start
  22
  23 set prev_timeout $timeout
  24 set timeout 60
  25
  26 #
  27 # test default actions of gdb commands
  28 #
  29
  30 #load_lib gdb.exp
  31
  32 gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file"
  33
  34 # test append
  35 gdb_test "append" "\"append\" must be followed by a subcommand\.\[\r\n\]+List of append subcommands:.*"
  36 gdb_test "append binary" "\"append binary\" must be followed by a subcommand\.\[\r\n\]+List of append binary subcommands:.*"
  37 gdb_test "append memory" "Missing filename\."
  38 gdb_test "append value"  "Missing filename\."
  39 gdb_test "append binary memory" "Missing filename\."
  40 gdb_test "append binary value"  "Missing filename\."
  41
  42 setup_xfail "mips-idt-*"
  43 send_gdb "attach\n"
  44 gdb_expect {
  45     -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
  46                         { pass "attach" }
  47     -re "You can't do that when your target is `None'.*$gdb_prompt $"\
  48                         { pass "attach" }
  49     -re "You can't do that without a process to debug.*$gdb_prompt $"\
  50                         { pass "attach" }
  51     -re "Don't know how to attach.  Try \"help target\"..*$gdb_prompt $"\
  52                         { pass "attach" }
  53     -re "Kill it. .y or n." {
  54         send_gdb "y\n"
  55         exp_continue
  56     }
  57     -re "$gdb_prompt $" { fail "attach" }
  58     timeout { fail "(timeout) attach" }
  59 }
  60
  61 if ![target_info exists use_gdb_stub] {
  62     gdb_test "break" "No default breakpoint address now." "break"
  63     foreach i "b br bre brea" {
  64         gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation"
  65     }
  66
  67
  68     setup_xfail "mips-idt-*"
  69     gdb_test "backtrace" "No stack."
  70
  71     # ba and bac are no longer unique command prefixes. So these tests
  72     # elict an error from GDB.
  73     # GDB needs to be fixed to map unique alias here for ba bac.
  74     #
  75     foreach i "bt ba bac" {
  76         setup_xfail "mips-idt-*"
  77         gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
  78     }
  79 } else {
  80     warning "Skipping backtrace and break tests because of GDB stub."
  81 }
  82
  83 # This works on the MIPS IDT board, but confuses future tests.
  84 if ![istarget "mips-idt-*"] then {
  85     gdb_test "continue" "The program is not being run." "continue"
  86     gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
  87 }
  88
  89 #test call
  90 gdb_test "call" "The history is empty..*" "call"
  91
  92
  93 #test catch
  94 gdb_test "catch" "Catch requires an event name..*" "catch"
  95
  96 #test cd
  97 gdb_test "cd" "Argument required .new working directory.*" "cd"
  98
  99 #test clear
 100 gdb_test "clear" "No source file specified..*" "clear"
 101
 102 #test commands
 103 gdb_test "commands" "Argument required .one or more breakpoint numbers...*" "commands"
 104
 105 #test condition
 106 gdb_test "condition" "Argument required .breakpoint number.*" "condition"
 107
 108 #test core-file
 109 gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file"
 110 #test delete "d" abbreviation
 111 gdb_test "d" "" "delete \"d\" abbreviation"
 112 #test delete
 113 gdb_test "delete" "" "delete"
 114 #test define
 115 gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define"
 116 #test delete breakpoints
 117 gdb_test "delete breakpoints" "" "delete breakpoints"
 118 #test delete display
 119 # FIXME -- need to dump full output to detailed log
 120 send_gdb "delete display\n"
 121 gdb_expect {
 122     -re "Delete all auto-display expressions.*y or n. $" {
 123         send_gdb "y\n"
 124         gdb_expect {
 125             -re "$gdb_prompt $"     { pass "delete display prompt" }
 126             timeout             { fail "(timeout) delete display prompt" }
 127         }
 128     }
 129     timeout             { fail "(timeout) delete display prompt" }
 130
 131 }
 132
 133 #test detach
 134 gdb_test "detach" "" "detach"
 135
 136 if [istarget "h8300-*-hms"] then {
 137     gdb_exit
 138     gdb_start
 139 }
 140
 141 #test directory
 142 # FIXME -- need to dump full output to detailed log
 143
 144 send_gdb "directory\n"
 145 gdb_expect {
 146     -re "Reinitialize source path to empty.*y or n. $"  {
 147         send_gdb "y\n"
 148         gdb_expect {
 149             -re "Source directories searched: .cdir\[:;\].cwd.*$gdb_prompt $"\
 150                     { pass "directory prompt" }
 151             timeout             { fail "(timeout) directory prompt" }
 152         }
 153     }
 154 }
 155
 156 #test disable "dis" abbreviation
 157 gdb_test "dis" "" "disable \"dis\" abbreviation"
 158 #test disable "disa" abbreviation
 159 gdb_test "disa" "" "disable \"disa\" abbreviation"
 160 #test disable
 161 gdb_test "disable" "" "disable"
 162 #test disable breakpoints
 163 gdb_test "disable breakpoints" "" "disable breakpoints"
 164 #test disable display
 165 gdb_test "disable display" "" "disable display"
 166 #test disassemble
 167 gdb_test "disassemble" "No frame selected." "disassemble"
 168 #test display
 169 gdb_test "display" "" "display"
 170 #test do
 171 gdb_test "do" "No stack." "do"
 172 #test document
 173 gdb_test "document" "Argument required .name of command to define.*" "document"
 174 #test down
 175 gdb_test "down" "No stack.*" "down"
 176 #test down-silently
 177 gdb_test "down-silently" "No stack." "down-silently"
 178 # test dump
 179 gdb_test "dump" "\"dump\" must be followed by a subcommand\.\[\r\n\]+List of dump subcommands:.*"
 180 gdb_test "dump binary" "\"dump binary\" must be followed by a subcommand\.\[\r\n\]+List of dump binary subcommands:.*"
 181 gdb_test "dump ihex" "\"dump ihex\" must be followed by a subcommand\.\[\r\n\]+List of dump ihex subcommands:.*"
 182 gdb_test "dump memory" "Missing filename\."
 183 gdb_test "dump srec" "\"dump srec\" must be followed by a subcommand\.\[\r\n\]+List of dump srec subcommands:.*"
 184 gdb_test "dump tekhex" "\"dump tekhex\" must be followed by a subcommand\.\[\r\n\]+List of dump tekhex subcommands:.*"
 185 gdb_test "dump value" "Missing filename\."
 186 gdb_test "dump binary memory" "Missing filename\."
 187 gdb_test "dump binary value"  "Missing filename\."
 188 gdb_test "dump ihex memory" "Missing filename\."
 189 gdb_test "dump ihex value"  "Missing filename\."
 190 gdb_test "dump srec memory" "Missing filename\."
 191 gdb_test "dump srec value"  "Missing filename\."
 192 gdb_test "dump tekhex memory" "Missing filename\."
 193 gdb_test "dump tekhex value"  "Missing filename\."
 194 #test echo
 195 gdb_test "echo" "" "echo"
 196 #test enable breakpoints delete
 197 gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete"
 198 #test enable breakpoints once
 199 gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once"
 200 #test enable breakpoints
 201 gdb_test "enable breakpoints" "" "enable breakpoints"
 202 #test enable delete
 203 gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete"
 204 #test enable display
 205 gdb_test "enable display" "" "enable display"
 206 #test enable once
 207 gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once"
 208 #test enable
 209 gdb_test "enable" "" "enable"
 210 #test exec-file
 211 send_gdb "exec-file\n"
 212 gdb_expect {
 213     -re "No executable file now..*$gdb_prompt $" {
 214         pass "exec-file"
 215     }
 216     -re "exec-file.*A program is being debugged already.  Kill it. .y or n.*$" {
 217         send_gdb "n\n"
 218         if $verbose>1 then {
 219             send_user "\tDidn't kill program being debugged\n"
 220         }
 221         gdb_expect -re "$gdb_prompt $" { }
 222         pass "exec-file"
 223     }
 224     -re "$gdb_prompt $" { fail "exec-file" }
 225     timeout             { fail "(timeout) exec-file" }
 226 }
 227
 228 #test frame "f" abbreviation
 229 gdb_test "f" "No stack." "frame \"f\" abbreviation"
 230 #test frame
 231 gdb_test "frame" "No stack." "frame"
 232 #test fg
 233 gdb_test "fg" "The program is not being run." "fg"
 234 # FIXME: fg kills the udi connection
 235 #test file
 236 send_gdb "file\n"
 237 gdb_expect {
 238     -re "No executable file now..*$gdb_prompt $"\
 239             { pass "file" }
 240     -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
 241         send_gdb "n\n"
 242         if $verbose>1 then {
 243             send_user "\t\tDidn't kill program being debugged\n"
 244         }
 245         gdb_expect -re "$gdb_prompt $" { }
 246         pass "file"
 247     }
 248     -re ".*$gdb_prompt $"       { fail "file" }
 249     timeout             { fail "(timeout) file" }
 250 }
 251
 252 #test finish
 253 gdb_test "finish" "The program is not being run." "finish"
 254 #test forward-search
 255 # The message here comes from the regexp library, not gdb, and so can
 256 # vary on different systems.
 257 gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search"
 258 #test gcore
 259 send_gdb "gcore\n"
 260 gdb_expect {
 261     -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
 262         pass "gcore"
 263     }
 264     -re "Undefined command: .*$gdb_prompt $" {
 265         pass "gcore"
 266     }
 267     default { fail "gcore" }
 268 }
 269 send_gdb "generate-core-file\n"
 270 gdb_expect {
 271     -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
 272         pass "generate-core-file"
 273     }
 274     -re "Undefined command: .*$gdb_prompt $" {
 275         pass "generate-core-file"
 276     }
 277     default { fail "generate-core-file" }
 278 }
 279 #test help "h" abbreviation
 280 gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation"
 281 #test help
 282 gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help"
 283 #test handle
 284 gdb_test "handle" "Argument required .signal to handle.*" "handle"
 285 #test info "i" abbreviation
 286 gdb_test "i" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation"
 287 #test info
 288 gdb_test "info" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info"
 289 #test ignore
 290 gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore"
 291 #test info address
 292 gdb_test "info address" "Argument required." "info address"
 293 #test info all-registers
 294 gdb_test "info all-registers" "The program has no registers now." "info all-registers"
 295 #test info args
 296 gdb_test "info args" "No frame selected." "info args"
 297 #test info bogus-gdb-command
 298 gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\".  Try \"help info\".*" "info bogus-gdb-command"
 299 #test info breakpoints
 300 gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints"
 301 #test info catch
 302 gdb_test "info catch" "No frame selected." "info catch"
 303 #test info copying
 304 # FIXME -- doesn't work worth a shit
 305 #send_gdb "info copying"
 306 #       -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."#
 307 gdb_test "info copying"
 308 #       }
 309 #
 310 #
 311 #test info display
 312 gdb_test "info display" "There are no auto-display expressions now." "info display"
 313 #test info frame "f" abbreviation
 314 gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation"
 315 #test info frame
 316 gdb_test "info frame" "No stack.|No selected frame." "info frame"
 317 #test info files
 318 gdb_test "info files" "" "info files"
 319 #test info float
 320 gdb_test "info float" "The program has no registers now." "info float"
 321 #test info functions
 322 gdb_test "info functions" "All defined functions:" "info functions"
 323 #test info locals
 324 gdb_test "info locals" "No frame selected." "info locals"
 325 #test info program
 326 gdb_test "info program" "The program being debugged is not being run." "info program"
 327 #test info registers
 328 gdb_test "info registers" "The program has no registers now." "info registers"
 329 #test info stack "s" abbreviation
 330 gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
 331 #test info stack
 332 gdb_test "info stack" "No stack." "info stack"
 333 #test info set
 334 # FIXME -- needs to match the entire output
 335 # FIXME -- on native solaris 2.8, this test fails due to this line:
 336 #  prompt:  Gdb's prompt is "(gdb) ".^M
 337 gdb_test "info set" "confirm:  Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename:  The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize:  Number of source lines gdb will list by default is 10.*" "info set"
 338 gdb_test "info symbol" "Argument required .address.."
 339 #test info source
 340 gdb_test  "info source" "No current source file..*" "info source"
 341 #test info sources
 342 gdb_test "info sources" "No symbol table is loaded.  Use the \"file\" command.*" "info sources"
 343 #test info target
 344 gdb_test "info target" "" "info target"
 345 #test info terminal
 346 gdb_test "info terminal" "No saved terminal information." "info terminal"
 347 #test info types
 348 gdb_test "info types" "All defined types:" "info types"
 349 #test info variables
 350 gdb_test "info variables" "All defined variables:" "info variables"
 351 #test info vector
 352 gdb_test "info vector" "The program has no registers now." "info vector"
 353 #test info warranty
 354 gdb_test "info warranty" "15. *Disclaimer of Warranty.*" "info warranty"
 355 #test info watchpoints
 356 gdb_test "info watchpoints" "No watchpoints." "info watchpoints"
 357 #test inspect
 358 gdb_test "inspect" "The history is empty." "inspect"
 359 #test jump
 360 gdb_test "jump" "The program is not being run." "jump"
 361 #test kill
 362 gdb_test "kill" "The program is not being run." "kill"
 363 #test list "l" abbreviation
 364 gdb_test "l" "No symbol table is loaded.  Use the \"file\" command.*" "list \"l\" abbreviation"
 365 #test list
 366 gdb_test "list" "No symbol table is loaded.  Use the \"file\" command.*" "list"
 367 #test load
 368 # The ``takes a file name'' case is for vxgdb.
 369 # The ``Use the "file" command'' case is for newer GDB versions which try
 370 # to deduce the filename from the exec file.
 371 gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
 372 #test next "n" abbreviation
 373 gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
 374 #test next
 375 gdb_test "next" "The program is not being run." "next"
 376 #test nexti "ni" abbreviation
 377 gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
 378 #test nexti
 379 gdb_test "nexti" "The program is not being run." "nexti"
 380 #test output
 381 gdb_test "output" "Argument required .expression to compute.*" "output"
 382
 383 #test overlay
 384 gdb_test "overlay" "\"overlay\" must be followed by the name of .*"
 385 #test a non-existant overlay subcommand
 386 gdb_test "overlay on"     "Undefined overlay command.* Try \"help overlay\"."
 387 gdb_test "overlay manual" "" "overlay manual #1"
 388 gdb_test "overlay auto"   ""
 389 gdb_test "overlay off"    ""
 390 gdb_test "overlay list"   "No sections are mapped."
 391 gdb_test "overlay map"    "Overlay debugging not enabled.*" "overlay map #1"
 392 gdb_test "overlay unmap"  "Overlay debugging not enabled.*" "overlay unmap #1"
 393 gdb_test "overlay manual" "" "overlay manual #2"
 394 gdb_test "overlay map"    "Argument required: name of an overlay section." "overlay map #2"
 395 gdb_test "overlay unmap"  "Argument required: name of an overlay section." "overlay unmap #2"
 396
 397 #test print "p" abbreviation
 398 gdb_test "p" "The history is empty." "print \"p\" abbreviation"
 399 #test print
 400 gdb_test "print" "The history is empty." "print"
 401 #test printf
 402 gdb_test "printf" "Argument required .format-control string and values to print.*" "printf"
 403 #test ptype
 404 gdb_test "ptype" "The history is empty." "ptype"
 405 #test pwd
 406 gdb_test "pwd" "Working directory .*" "pwd"
 407
 408 #test run "r" abbreviation
 409 if [istarget "*-*-vxworks*"] then {
 410     gdb_test "set args" "" ""
 411
 412     gdb_test "r" "Starting program: .*
 413 You must specify a function name to run, and arguments if any"\
 414                 "run \"r\" abbreviation"
 415     gdb_test "set args main" "" ""
 416
 417 } else {
 418     send_gdb "r\n"
 419     gdb_expect {
 420             -re "Starting program:  .*
 421 You can't do that when your target is `None'.*$gdb_prompt $"\
 422                         { pass "run \"r\" abbreviation" }
 423             -re "Starting program:  .*
 424 No executable file specified.*
 425 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
 426                         { pass "run \"r\" abbreviation" }
 427             -re "Starting program:  .*
 428 No executable specified, use .target exec.\\..*$gdb_prompt $"\
 429                         { pass "run \"r\" abbreviation" }
 430             -re "Starting program:  .*
 431 No image loaded into target.*$gdb_prompt $"\
 432                         { pass "run \"r\" abbreviation" }
 433             -re "Starting program:  .*
 434 No program loaded.*$gdb_prompt $"\
 435                         { pass "run \"r\" abbreviation" }
 436             -re "Don't know how to run.  Try \"help target\"..*$gdb_prompt $"\
 437                         { pass "run \"r\" abbreviation" }
 438             -re ".*$gdb_prompt $"       { fail "run \"r\" abbreviation" }
 439             timeout             { fail "(timeout) run \"r\" abbreviation" }
 440         }
 441 }
 442
 443 #test run
 444 if [istarget "*-*-vxworks*"] then {
 445     gdb_test "set args" "" ""
 446
 447     gdb_test "run" "Starting program: .*
 448 You must specify a function name to run, and arguments if any"
 449     gdb_test "set args main" "" ""
 450
 451 } else {
 452     send_gdb "run\n"
 453     gdb_expect {
 454             -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" }
 455             -re "Starting program:  .*
 456 No executable file specified.*
 457 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
 458                         { pass "run" }
 459             -re "Starting program:  .*
 460 No executable specified, use .target exec.\\..*$gdb_prompt $"\
 461                         { pass "run" }
 462             -re "Starting program:  .*
 463 No image loaded into target.*$gdb_prompt $"\
 464                         { pass "run" }
 465             -re "Starting program:  .*
 466 No program loaded.*$gdb_prompt $"\
 467                         { pass "run \"r\" abbreviation" }
 468             -re "Don't know how to run.  Try \"help target\"..*$gdb_prompt $"\
 469                         { pass "run" }
 470             -re ".*$gdb_prompt $"       { fail "run" }
 471             timeout             { fail "(timeout) run" }
 472         }
 473 }
 474
 475 #test rbreak
 476 gdb_test "rbreak" "" "rbreak"
 477
 478 # test restore
 479 gdb_test "restore" "You can't do that without a process to debug\."
 480
 481 #test return
 482 # The middle case accomodated the obsolete a29k, where doing the "ni"
 483 # above causes an initial stack to be created.
 484 gdb_test "return" "No selected frame..*" "return"  "Make .* return now.*y or n. $" "y"
 485
 486
 487 #test reverse-search
 488 gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
 489 #test step "s" abbreviation
 490 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
 491 #test step
 492 gdb_test "step" "The program is not being run." "step #1"
 493 #test search
 494 gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
 495 #test section
 496 gdb_test "section" "Must specify section name and its virtual address.*" "section"
 497 #test set annotate
 498 gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate"
 499 #test set args
 500 gdb_test "set args" "" "set args"
 501 #test set check "c" abbreviation
 502 gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation"
 503 #test set check "ch" abbreviation
 504 gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation"
 505 #test set check
 506 gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check"
 507 #test set check range
 508 gdb_test "set check range" "" "set check range"
 509 #test set check type
 510 gdb_test "set check type" "" "set check type"
 511 #test set complaints
 512 gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints"
 513 #test set confirm
 514 gdb_test "set confirm" "" "set confirm"
 515 # Don't test set editing. What if we're talking to a gdb that
 516 # won't do editing correctly while we're talking to it?
 517 # gdb_test "set editing" "" "set editing"
 518
 519 #test set environment
 520 gdb_test "set environment" "Argument required .environment variable and value.*" "set environment"
 521 #test set height
 522 gdb_test "set height" "Argument required .integer to set it to.*" "set height"
 523 #test set history expansion
 524 gdb_test "set history expansion" "" "set history expansion"
 525 #test set history filename
 526 gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename"
 527 #test set history save
 528 gdb_test "set history save" "" "set history save"
 529 #test set history size
 530 gdb_test "set history size" "Argument required .integer to set it to.*" "set history size"
 531 #test set history
 532 gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand.(\[^\r\n\]*\[\r\n\])+List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set history"
 533 #test set language
 534 gdb_test "set language" "Requires an argument. Valid arguments are auto, local, unknown, ada, c, c.., asm, minimal, d, fortran, objective-c, java, modula-2, pascal, scheme." "set language"
 535 #test set listsize
 536 gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize"
 537 #test set print "p" abbreviation
 538 gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation"
 539 #test set print "pr" abbreviation
 540 gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation"
 541 #test set print
 542 gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print"
 543 #test set print address
 544 gdb_test "set print address" "" "set print address"
 545 #test set print array
 546 gdb_test "set print array" "" "set print array"
 547 #test set print asm-demangle
 548 gdb_test "set print asm-demangle" "" "set print asm-demangle"
 549 #test set print demangle
 550 gdb_test "set print demangle" "" "set print demangle"
 551 #test set print elements
 552 gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements"
 553 #test set print object
 554 gdb_test "set print object" "" "set print object"
 555 #test set print pretty
 556 gdb_test "set print pretty" "" "set print pretty"
 557 #test set print sevenbit-strings
 558 gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings"
 559 #test set print union
 560 gdb_test "set print union" "" "set print union"
 561 #test set print vtbl
 562 gdb_test "set print vtbl" "" "set print vtbl"
 563 # FIXME -- need a test for "set prompt"
 564 #test set radix
 565 gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix"
 566 #test set symbol-reloading
 567 gdb_test "set symbol-reloading" "" "set symbol-reloading"
 568 #test set variable
 569 gdb_test "set variable" "Argument required .expression to compute.*" "set variable"
 570 #test set verbose
 571 gdb_test "set verbose" "" "set verbose"
 572 #test set width
 573 gdb_test "set width" "Argument required .integer to set it to.*" "set width"
 574 #test set write
 575 # This is only supported on targets which use exec.o.
 576 gdb_test "set write" "" "set write"
 577 #test set
 578 gdb_test "set" "Argument required .expression to compute.*" "set"
 579 #test shell echo Hi dad!
 580 gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!"
 581 #test show annotate
 582 gdb_test "show annotate" "Annotation_level is 0."        "show annotate"
 583 #test show args
 584 gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args"
 585 #test show check "c" abbreviation
 586 gdb_test "show c" "range:  *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type:  *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation"
 587 #test show check "ch" abbreviation
 588 gdb_test "show ch" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type:  *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation"
 589 #test show check
 590 gdb_test "show check" "range:  *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type:  *Type checking is \"auto; currently off\"." "show check"
 591 #test show check range
 592 gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range"
 593 #test show check type
 594 gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type"
 595 #test show commands
 596 gdb_test "show commands" "" "show commands"
 597 #test show complaints
 598 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints"
 599 #test show confirm
 600 gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm"
 601 #test show convenience
 602 gdb_test "show convenience" "\\\$_siginfo = void" "show convenience"
 603 #test show directories
 604 gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" "show directories"
 605 #test show editing
 606 gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing"
 607 #test show height
 608 gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height"
 609 #test show history expansion
 610 gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion"
 611 #test show history filename
 612 gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename"
 613 #test show history save
 614 gdb_test "show history save" "Saving of the history record on exit is on." "show history save"
 615 #test show history size
 616 gdb_test "show history size" "The size of the command history is.*" "show history size"
 617 #test show history
 618 gdb_test "show history" "expansion:  *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+filename:  *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+size: * The size of the command history is.*" "show history"
 619 #test show language
 620 gdb_test "show language" "The current source language is \"auto; currently c\"." "show language"
 621 #test show listsize
 622 gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize"
 623 #test show print "p" abbreviation
 624 gdb_test "show p" ".*" "show p"
 625 #test show print "pr" abbreviation
 626 gdb_test "show pr" ".*" "show pr"
 627 #test show print
 628 gdb_test "show print" "" "show print"
 629 #test show paths
 630 gdb_test "show paths" "Executable and object file path:.*" "show paths"
 631 #test show print address
 632 gdb_test "show print address" "Printing of addresses is on." "show print address"
 633 #test show print array
 634 gdb_test "show print array" "Prettyprinting of arrays is on." "show print array"
 635 #test show print asm-demangle
 636 gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." "show print asm-demangle"
 637 #test show print demangle
 638 gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." "show print demangle"
 639 #test show print elements
 640 gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements"
 641 #test show print object
 642 gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object"
 643 #test show print pretty
 644 gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty"
 645 #test show print sevenbit-strings
 646 gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings"
 647 #test show print union
 648 gdb_test "show print union" "Printing of unions interior to structures is on." "show print union"
 649 #test show print vtbl
 650 gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl"
 651 #test show prompt
 652 # In the FAIL case, can't just look for $gdb_prompt because that will match
 653 # the output, rather than the prompt. So look for $gdb_prompt at the start
 654 # of a line.
 655 gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt"
 656 #test show radix
 657 gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix"
 658 #test show symbol-reloading
 659 gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading"
 660 #test show user
 661 gdb_test "show user" "" "show user"
 662 #test show values
 663 gdb_test "show values" "" "show values"
 664 #test show verbose
 665 gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose"
 666 #test show version
 667 gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>(\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law.  Type \"show copying\"(\[^\r\n\]*\[\r\n\])+and \"show warranty\" for details..*" "show version"
 668 #test show width
 669 gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width"
 670 #test show write
 671 # This is only supported on targets which use exec.o.
 672 gdb_test "show write" "Writing into executable and core files is o.*" "show write"
 673 #test show
 674 gdb_test "show" "confirm:  *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename:  *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save:  *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size:  *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize:  *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements:  *Limit on string chars or array elements to print is 200..*" "show"
 675 #test stepi "si" abbreviation
 676 gdb_test  "si" "The program is not being run." "stepi \"si\" abbreviation"
 677 #test stepi
 678 gdb_test "stepi" "The program is not being run." "stepi"
 679 #test signal
 680 gdb_test "signal" "The program is not being run." "signal"
 681 #test source
 682 gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" "source"
 683 #test step "s" abbreviation
 684 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
 685 #test step
 686 gdb_test "step" "The program is not being run." "step #2"
 687 #test symbol-file
 688 gdb_test "symbol-file" "" "symbol-file"
 689
 690 #test target child
 691 gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\".  *Try \"help target\".*" "target child"
 692
 693 #test target procfs
 694 gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\".  *Try \"help target\".*" "target procfs"
 695
 696 #test target core
 697 send_gdb "target core\n"
 698 gdb_expect {
 699     -re "No core file specified..*$gdb_prompt $" { pass "target core" }
 700     -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
 701         send_gdb "n\n"
 702         if $verbose>1 then {
 703             send_user "\t\tDidn't kill program being debugged\n"
 704         }
 705         gdb_expect -re "$gdb_prompt $" { }
 706         pass "target core"
 707     }
 708     -re "Undefined target command: \"core\".  Try \"help target\"..*$gdb_prompt $" { pass "target core" }
 709     -re ".*$gdb_prompt $"       { fail "target core" }
 710     timeout             { fail "(timeout) target core" }
 711 }
 712
 713 #test target exec
 714 send_gdb "target exec\n"
 715 gdb_expect {
 716         -re "No executable file now..*$gdb_prompt $"\
 717                         { pass "target exec" }
 718         -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
 719             send_gdb "n\n"
 720             if $verbose>1 then {
 721                 send_user "\t\tDidn't kill program being debugged\n"
 722             }
 723             gdb_expect -re "$gdb_prompt $" { }
 724             pass "target exec"
 725         }
 726         -re ".*$gdb_prompt $"   { fail "target exec" }
 727         timeout         { fail "(timeout) target exec" }
 728         }
 729
 730 #test target remote
 731 if ![istarget "*-*-udi*"] then {
 732     send_gdb "target remote\n"
 733     gdb_expect {
 734         -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\
 735                         { pass "target remote" }
 736         -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
 737             send_gdb "n\n"
 738             if $verbose>1 then {
 739                 send_user "\t\tDidn't kill program being debugged\n"
 740             }
 741             gdb_expect -re "$gdb_prompt $" { }
 742             pass "target remote"
 743         }
 744         -re ".*$gdb_prompt $"   { fail "target remote" }
 745         timeout         { fail "(timeout) target remote" }
 746     }
 747 }
 748
 749 #test target
 750 gdb_test "target" "Argument required .target name.*" "target"
 751 #test tbreak
 752 gdb_test "tbreak" "No default breakpoint address now." "tbreak"
 753 #test tty
 754 gdb_test "tty" "Argument required .filename to set it to\..*" "tty"
 755 #test until "u" abbreviation
 756 gdb_test "u" "The program is not being run." "until \"u\" abbreviation"
 757 #test until
 758 gdb_test "until" "The program is not being run." "until"
 759 #test undisplay
 760 # FIXME -- need to dump full output to detailed log
 761 send_gdb "undisplay\n"
 762 gdb_expect {
 763     -re "Delete all auto-display expressions.*y or n. $" {
 764         send_gdb "y\n"
 765         gdb_expect {
 766             -re "$gdb_prompt $" { pass "undisplay prompt" }
 767             timeout { fail "(timeout) (timeout) undisplay prompt"    }
 768         }
 769     }
 770     timeout             { fail "(timeout) (timeout) undisplay prompt" }
 771 }
 772
 773 #test unset environment
 774 send_gdb "unset environment\n"
 775 gdb_expect {
 776     -re "Delete all environment variables?.*y or n. $" {
 777         send_gdb "y\n"
 778         gdb_expect {
 779             -re "$gdb_prompt $" { pass "unset environmentprompt" }
 780             timeout {
 781                 fail "(timeout) (timeout) unset environment prompt"
 782             }
 783         }
 784     }
 785     timeout {
 786         fail "(timeout) (timeout) unset environment prompt"
 787     }
 788 }
 789
 790 #test unset
 791 gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand.(\[^\r\n\]*\[\r\n\])+List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "unset"
 792 #test up
 793 #test up-silently
 794 gdb_test "up-silently" "No stack." "up-silently"
 795 #test watch
 796 gdb_test "watch" "Argument required .expression to compute.*" "watch"
 797 #test whatis
 798 gdb_test "whatis" "The history is empty." "whatis"
 799 #test where
 800 gdb_test "where" "No stack." "where"
 801 #test x
 802 gdb_test "x" "Argument required .starting display address.*" "x"
 803
 804 gdb_exit
 805
 806 set timeout $prev_timeout