1 # Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
2 # 2000, 2001, 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 3 of the License, or
7 # (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program. If not, see <http://www.gnu.org/licenses/>.
17 # Please email any bugs, comments, and/or additions to this file to:
18 # bug-gdb@prep.ai.mit.edu
20 # Start with a fresh gdb
28 # test default actions of gdb commands
33 gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file"
36 gdb_test "append" "\"append\" must be followed by a subcommand\.\[\r\n\]+List of append subcommands:.*"
37 gdb_test "append binary" "\"append binary\" must be followed by a subcommand\.\[\r\n\]+List of append binary subcommands:.*"
38 gdb_test "append memory" "Missing filename\."
39 gdb_test "append value" "Missing filename\."
40 gdb_test "append binary memory" "Missing filename\."
41 gdb_test "append binary value" "Missing filename\."
43 setup_xfail "mips-idt-*"
46 -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
48 -re "You can't do that when your target is `None'.*$gdb_prompt $"\
50 -re "You can't do that without a process to debug.*$gdb_prompt $"\
52 -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\
54 -re "Kill it. .y or n." {
58 -re "$gdb_prompt $" { fail "attach" }
59 timeout { fail "(timeout) attach" }
62 if ![target_info exists use_gdb_stub] {
63 gdb_test "break" "No default breakpoint address now." "break"
64 foreach i "b br bre brea" {
65 gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation"
69 setup_xfail "mips-idt-*"
70 gdb_test "backtrace" "No stack."
72 # ba and bac are no longer unique command prefixes. So these tests
73 # elict an error from GDB.
74 # GDB needs to be fixed to map unique alias here for ba bac.
76 foreach i "bt ba bac" {
77 setup_xfail "mips-idt-*"
78 gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
81 warning "Skipping backtrace and break tests because of GDB stub."
84 # This works on the MIPS IDT board, but confuses future tests.
85 if ![istarget "mips-idt-*"] then {
86 gdb_test "continue" "The program is not being run." "continue"
87 gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
91 gdb_test "call" "The history is empty..*" "call"
95 gdb_test "catch" "Catch requires an event name..*" "catch"
98 gdb_test "cd" "Argument required .new working directory.*" "cd"
101 gdb_test "clear" "No source file specified..*" "clear"
104 gdb_test "commands" "No breakpoint number 0..*" "commands"
107 gdb_test "condition" "Argument required .breakpoint number.*" "condition"
110 gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file"
111 #test delete "d" abbreviation
112 gdb_test "d" "" "delete \"d\" abbreviation"
114 gdb_test "delete" "" "delete"
116 gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define"
117 #test delete breakpoints
118 gdb_test "delete breakpoints" "" "delete breakpoints"
120 # FIXME -- need to dump full output to detailed log
121 send_gdb "delete display\n"
123 -re "Delete all auto-display expressions.*y or n. $" {
126 -re "$gdb_prompt $" { pass "delete display prompt" }
127 timeout { fail "(timeout) delete display prompt" }
130 timeout { fail "(timeout) delete display prompt" }
135 gdb_test "detach" "" "detach"
137 if [istarget "h8300-*-hms"] then {
143 # FIXME -- need to dump full output to detailed log
145 send_gdb "directory\n"
147 -re "Reinitialize source path to empty.*y or n. $" {
150 -re "Source directories searched: .cdir\[:;\].cwd.*$gdb_prompt $"\
151 { pass "directory prompt" }
152 timeout { fail "(timeout) directory prompt" }
157 #test disable "dis" abbreviation
158 gdb_test "dis" "" "disable \"dis\" abbreviation"
159 #test disable "disa" abbreviation
160 gdb_test "disa" "" "disable \"disa\" abbreviation"
162 gdb_test "disable" "" "disable"
163 #test disable breakpoints
164 gdb_test "disable breakpoints" "" "disable breakpoints"
165 #test disable display
166 gdb_test "disable display" "" "disable display"
168 gdb_test "disassemble" "No frame selected." "disassemble"
170 gdb_test "display" "" "display"
172 gdb_test "do" "No stack." "do"
174 gdb_test "document" "Argument required .name of command to define.*" "document"
176 gdb_test "down" "No stack.*" "down"
178 gdb_test "down-silently" "No stack." "down-silently"
180 gdb_test "dump" "\"dump\" must be followed by a subcommand\.\[\r\n\]+List of dump subcommands:.*"
181 gdb_test "dump binary" "\"dump binary\" must be followed by a subcommand\.\[\r\n\]+List of dump binary subcommands:.*"
182 gdb_test "dump ihex" "\"dump ihex\" must be followed by a subcommand\.\[\r\n\]+List of dump ihex subcommands:.*"
183 gdb_test "dump memory" "Missing filename\."
184 gdb_test "dump srec" "\"dump srec\" must be followed by a subcommand\.\[\r\n\]+List of dump srec subcommands:.*"
185 gdb_test "dump tekhex" "\"dump tekhex\" must be followed by a subcommand\.\[\r\n\]+List of dump tekhex subcommands:.*"
186 gdb_test "dump value" "Missing filename\."
187 gdb_test "dump binary memory" "Missing filename\."
188 gdb_test "dump binary value" "Missing filename\."
189 gdb_test "dump ihex memory" "Missing filename\."
190 gdb_test "dump ihex value" "Missing filename\."
191 gdb_test "dump srec memory" "Missing filename\."
192 gdb_test "dump srec value" "Missing filename\."
193 gdb_test "dump tekhex memory" "Missing filename\."
194 gdb_test "dump tekhex value" "Missing filename\."
196 gdb_test "echo" "" "echo"
197 #test enable breakpoints delete
198 gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete"
199 #test enable breakpoints once
200 gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once"
201 #test enable breakpoints
202 gdb_test "enable breakpoints" "" "enable breakpoints"
204 gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete"
206 gdb_test "enable display" "" "enable display"
208 gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once"
210 gdb_test "enable" "" "enable"
212 send_gdb "exec-file\n"
214 -re "No executable file now..*$gdb_prompt $" {
217 -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" {
220 send_user "\tDidn't kill program being debugged\n"
222 gdb_expect -re "$gdb_prompt $" { }
225 -re "$gdb_prompt $" { fail "exec-file" }
226 timeout { fail "(timeout) exec-file" }
229 #test frame "f" abbreviation
230 gdb_test "f" "No stack." "frame \"f\" abbreviation"
232 gdb_test "frame" "No stack." "frame"
234 gdb_test "fg" "The program is not being run." "fg"
235 # FIXME: fg kills the udi connection
239 -re "No executable file now..*$gdb_prompt $"\
241 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
244 send_user "\t\tDidn't kill program being debugged\n"
246 gdb_expect -re "$gdb_prompt $" { }
249 -re ".*$gdb_prompt $" { fail "file" }
250 timeout { fail "(timeout) file" }
254 gdb_test "finish" "The program is not running." "finish"
256 # The message here comes from the regexp library, not gdb, and so can
257 # vary on different systems.
258 gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search"
262 -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
265 -re "Undefined command: .*$gdb_prompt $" {
268 default { fail "gcore" }
270 send_gdb "generate-core-file\n"
272 -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
273 pass "generate-core-file"
275 -re "Undefined command: .*$gdb_prompt $" {
276 pass "generate-core-file"
278 default { fail "generate-core-file" }
280 #test help "h" abbreviation
281 gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation"
283 gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help"
285 gdb_test "handle" "Argument required .signal to handle.*" "handle"
286 #test info "i" abbreviation
287 gdb_test "i" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation"
289 gdb_test "info" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info"
291 gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore"
293 gdb_test "info address" "Argument required." "info address"
294 #test info all-registers
295 gdb_test "info all-registers" "The program has no registers now." "info all-registers"
297 gdb_test "info args" "No frame selected." "info args"
298 #test info bogus-gdb-command
299 gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" "info bogus-gdb-command"
300 #test info breakpoints
301 gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints"
303 gdb_test "info catch" "You can't do that without a process to debug." "info catch"
305 # FIXME -- doesn't work worth a shit
306 #send_gdb "info copying"
307 # -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."#
308 gdb_test "info copying"
313 gdb_test "info display" "There are no auto-display expressions now." "info display"
314 #test info frame "f" abbreviation
315 gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation"
317 gdb_test "info frame" "No stack.|No selected frame." "info frame"
319 gdb_test "info files" "" "info files"
321 gdb_test "info float" "The program has no registers now." "info float"
323 gdb_test "info functions" "All defined functions:" "info functions"
325 gdb_test "info locals" "No frame selected." "info locals"
327 gdb_test "info program" "The program being debugged is not being run." "info program"
329 gdb_test "info registers" "The program has no registers now." "info registers"
330 #test info stack "s" abbreviation
331 gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
333 gdb_test "info stack" "No stack." "info stack"
335 # FIXME -- needs to match the entire output
336 # FIXME -- on native solaris 2.8, this test fails due to this line:
337 # prompt: Gdb's prompt is "(gdb) ".^M
338 gdb_test "info set" "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename: The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize: Number of source lines gdb will list by default is 10.*" "info set"
339 gdb_test "info symbol" "Argument required .address.."
341 gdb_test "info source" "No current source file..*" "info source"
343 gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources"
345 gdb_test "info target" "" "info target"
347 gdb_test "info terminal" "No saved terminal information." "info terminal"
349 gdb_test "info types" "All defined types:" "info types"
351 gdb_test "info variables" "All defined variables:" "info variables"
353 gdb_test "info vector" "The program has no registers now." "info vector"
355 gdb_test "info warranty" "15. *Disclaimer of Warranty.*" "info warranty"
356 #test info watchpoints
357 gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints"
359 gdb_test "inspect" "The history is empty." "inspect"
361 gdb_test "jump" "The program is not being run." "jump"
363 gdb_test "kill" "The program is not being run." "kill"
364 #test list "l" abbreviation
365 gdb_test "l" "No symbol table is loaded. Use the \"file\" command.*" "list \"l\" abbreviation"
367 gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" "list"
369 # The ``takes a file name'' case is for vxgdb.
370 # The ``Use the "file" command'' case is for newer GDB versions which try
371 # to deduce the filename from the exec file.
372 gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
373 #test next "n" abbreviation
374 gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
376 gdb_test "next" "The program is not being run." "next"
377 #test nexti "ni" abbreviation
378 gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
380 gdb_test "nexti" "The program is not being run." "nexti"
382 gdb_test "output" "Argument required .expression to compute.*" "output"
385 gdb_test "overlay" "\"overlay\" must be followed by the name of .*"
386 #test a non-existant overlay subcommand
387 gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"."
388 gdb_test "overlay manual" "" "overlay manual #1"
389 gdb_test "overlay auto" ""
390 gdb_test "overlay off" ""
391 gdb_test "overlay list" "No sections are mapped."
392 gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1"
393 gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1"
394 gdb_test "overlay manual" "" "overlay manual #2"
395 gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2"
396 gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2"
398 #test print "p" abbreviation
399 gdb_test "p" "The history is empty." "print \"p\" abbreviation"
401 gdb_test "print" "The history is empty." "print"
403 gdb_test "printf" "Argument required .format-control string and values to print.*" "printf"
405 gdb_test "ptype" "The history is empty." "ptype"
407 gdb_test "pwd" "Working directory .*" "pwd"
409 #test run "r" abbreviation
410 if [istarget "*-*-vxworks*"] then {
411 gdb_test "set args" "" ""
413 gdb_test "r" "Starting program: .*
414 You must specify a function name to run, and arguments if any"\
415 "run \"r\" abbreviation"
416 gdb_test "set args main" "" ""
421 -re "Starting program: .*
422 You can't do that when your target is `None'.*$gdb_prompt $"\
423 { pass "run \"r\" abbreviation" }
424 -re "Starting program: .*
425 No executable file specified.*
426 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
427 { pass "run \"r\" abbreviation" }
428 -re "Starting program: .*
429 No executable specified, use .target exec.\\..*$gdb_prompt $"\
430 { pass "run \"r\" abbreviation" }
431 -re "Starting program: .*
432 No image loaded into target.*$gdb_prompt $"\
433 { pass "run \"r\" abbreviation" }
434 -re "Starting program: .*
435 No program loaded.*$gdb_prompt $"\
436 { pass "run \"r\" abbreviation" }
437 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\
438 { pass "run \"r\" abbreviation" }
439 -re ".*$gdb_prompt $" { fail "run \"r\" abbreviation" }
440 timeout { fail "(timeout) run \"r\" abbreviation" }
445 if [istarget "*-*-vxworks*"] then {
446 gdb_test "set args" "" ""
448 gdb_test "run" "Starting program: .*
449 You must specify a function name to run, and arguments if any"
450 gdb_test "set args main" "" ""
455 -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" }
456 -re "Starting program: .*
457 No executable file specified.*
458 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
460 -re "Starting program: .*
461 No executable specified, use .target exec.\\..*$gdb_prompt $"\
463 -re "Starting program: .*
464 No image loaded into target.*$gdb_prompt $"\
466 -re "Starting program: .*
467 No program loaded.*$gdb_prompt $"\
468 { pass "run \"r\" abbreviation" }
469 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\
471 -re ".*$gdb_prompt $" { fail "run" }
472 timeout { fail "(timeout) run" }
477 gdb_test "rbreak" "" "rbreak"
480 gdb_test "restore" "You can't do that without a process to debug\."
483 # The middle case accomodated the obsolete a29k, where doing the "ni"
484 # above causes an initial stack to be created.
485 gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y"
489 gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
490 #test step "s" abbreviation
491 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
493 gdb_test "step" "The program is not being run." "step #1"
495 gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
497 gdb_test "section" "Must specify section name and its virtual address.*" "section"
499 gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate"
501 gdb_test "set args" "" "set args"
502 #test set check "c" abbreviation
503 gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation"
504 #test set check "ch" abbreviation
505 gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation"
507 gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check"
508 #test set check range
509 gdb_test "set check range" "" "set check range"
511 gdb_test "set check type" "" "set check type"
513 gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints"
515 gdb_test "set confirm" "" "set confirm"
516 # Don't test set editing. What if we're talking to a gdb that
517 # won't do editing correctly while we're talking to it?
518 # gdb_test "set editing" "" "set editing"
520 #test set environment
521 gdb_test "set environment" "Argument required .environment variable and value.*" "set environment"
523 gdb_test "set height" "Argument required .integer to set it to.*" "set height"
524 #test set history expansion
525 gdb_test "set history expansion" "" "set history expansion"
526 #test set history filename
527 gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename"
528 #test set history save
529 gdb_test "set history save" "" "set history save"
530 #test set history size
531 gdb_test "set history size" "Argument required .integer to set it to.*" "set history size"
533 gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand.(\[^\r\n\]*\[\r\n\])+List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set history"
535 gdb_test "set language" "The currently understood settings are:(\[^\r\n\]*\[\r\n\])+local or auto *Automatic setting based on source file(\[^\r\n\]*\[\r\n\])+c *Use the C language(\[^\r\n\]*\[\r\n\])+c\[+\]+ *Use the C\[+\]+ language(\[^\r\n\]*\[\r\n\])+modula-2 *Use the Modula-2 language.*" "set language"
537 gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize"
538 #test set print "p" abbreviation
539 gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation"
540 #test set print "pr" abbreviation
541 gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation"
543 gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print"
544 #test set print address
545 gdb_test "set print address" "" "set print address"
546 #test set print array
547 gdb_test "set print array" "" "set print array"
548 #test set print asm-demangle
549 gdb_test "set print asm-demangle" "" "set print asm-demangle"
550 #test set print demangle
551 gdb_test "set print demangle" "" "set print demangle"
552 #test set print elements
553 gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements"
554 #test set print object
555 gdb_test "set print object" "" "set print object"
556 #test set print pretty
557 gdb_test "set print pretty" "" "set print pretty"
558 #test set print sevenbit-strings
559 gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings"
560 #test set print union
561 gdb_test "set print union" "" "set print union"
563 gdb_test "set print vtbl" "" "set print vtbl"
564 # FIXME -- need a test for "set prompt"
566 gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix"
567 #test set symbol-reloading
568 gdb_test "set symbol-reloading" "" "set symbol-reloading"
570 gdb_test "set variable" "Argument required .expression to compute.*" "set variable"
572 gdb_test "set verbose" "" "set verbose"
574 gdb_test "set width" "Argument required .integer to set it to.*" "set width"
576 # This is only supported on targets which use exec.o.
577 gdb_test "set write" "" "set write"
579 gdb_test "set" "Argument required .expression to compute.*" "set"
580 #test shell echo Hi dad!
581 gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!"
583 gdb_test "show annotate" "Annotation_level is 0." "show annotate"
585 gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args"
586 #test show check "c" abbreviation
587 gdb_test "show c" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation"
588 #test show check "ch" abbreviation
589 gdb_test "show ch" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation"
591 gdb_test "show check" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check"
592 #test show check range
593 gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range"
594 #test show check type
595 gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type"
597 gdb_test "show commands" "" "show commands"
598 #test show complaints
599 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints"
601 gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm"
602 #test show convenience
603 gdb_test "show convenience" "No debugger convenience variables now defined.(\[^\r\n\]*\[\r\n\])+Convenience variables have names starting with \".\";(\[^\r\n\]*\[\r\n\])+use \"set\" as in \"set .foo = 5\" to define them." "show convenience"
604 #test show directories
605 gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" "show directories"
607 gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing"
609 gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height"
610 #test show history expansion
611 gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion"
612 #test show history filename
613 gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename"
614 #test show history save
615 gdb_test "show history save" "Saving of the history record on exit is on." "show history save"
616 #test show history size
617 gdb_test "show history size" "The size of the command history is.*" "show history size"
619 gdb_test "show history" "expansion: *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+filename: *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+size: * The size of the command history is.*" "show history"
621 gdb_test "show language" "The current source language is \"auto; currently c\"." "show language"
623 gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize"
624 #test show print "p" abbreviation
625 gdb_test "show p" ".*" "show p"
626 #test show print "pr" abbreviation
627 gdb_test "show pr" ".*" "show pr"
629 gdb_test "show print" "" "show print"
631 gdb_test "show paths" "Executable and object file path:.*" "show paths"
632 #test show print address
633 gdb_test "show print address" "Printing of addresses is on." "show print address"
634 #test show print array
635 gdb_test "show print array" "Prettyprinting of arrays is on." "show print array"
636 #test show print asm-demangle
637 gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." "show print asm-demangle"
638 #test show print demangle
639 gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." "show print demangle"
640 #test show print elements
641 gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements"
642 #test show print object
643 gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object"
644 #test show print pretty
645 gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty"
646 #test show print sevenbit-strings
647 gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings"
648 #test show print union
649 gdb_test "show print union" "Printing of unions interior to structures is on." "show print union"
650 #test show print vtbl
651 gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl"
653 # In the FAIL case, can't just look for $gdb_prompt because that will match
654 # the output, rather than the prompt. So look for $gdb_prompt at the start
656 gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt"
658 gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix"
659 #test show symbol-reloading
660 gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading"
662 gdb_test "show user" "" "show user"
664 gdb_test "show values" "" "show values"
666 gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose"
668 gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>(\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"(\[^\r\n\]*\[\r\n\])+and \"show warranty\" for details..*" "show version"
670 gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width"
672 # This is only supported on targets which use exec.o.
673 gdb_test "show write" "Writing into executable and core files is o.*" "show write"
675 gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200..*" "show"
676 #test stepi "si" abbreviation
677 gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation"
679 gdb_test "stepi" "The program is not being run." "stepi"
681 gdb_test "signal" "The program is not being run." "signal"
683 gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" "source"
684 #test step "s" abbreviation
685 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
687 gdb_test "step" "The program is not being run." "step #2"
689 gdb_test "symbol-file" "" "symbol-file"
692 gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\". *Try \"help target\".*" "target child"
695 gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\". *Try \"help target\".*" "target procfs"
698 send_gdb "target core\n"
700 -re "No core file specified..*$gdb_prompt $" { pass "target core" }
701 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
704 send_user "\t\tDidn't kill program being debugged\n"
706 gdb_expect -re "$gdb_prompt $" { }
709 -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" }
710 -re ".*$gdb_prompt $" { fail "target core" }
711 timeout { fail "(timeout) target core" }
715 send_gdb "target exec\n"
717 -re "No executable file now..*$gdb_prompt $"\
718 { pass "target exec" }
719 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
722 send_user "\t\tDidn't kill program being debugged\n"
724 gdb_expect -re "$gdb_prompt $" { }
727 -re ".*$gdb_prompt $" { fail "target exec" }
728 timeout { fail "(timeout) target exec" }
732 if ![istarget "*-*-udi*"] then {
733 send_gdb "target remote\n"
735 -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\
736 { pass "target remote" }
737 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
740 send_user "\t\tDidn't kill program being debugged\n"
742 gdb_expect -re "$gdb_prompt $" { }
745 -re ".*$gdb_prompt $" { fail "target remote" }
746 timeout { fail "(timeout) target remote" }
751 gdb_test "target" "Argument required .target name.*" "target"
753 gdb_test "tbreak" "No default breakpoint address now." "tbreak"
755 gdb_test "tty" "Argument required .filename to set it to\..*" "tty"
756 #test until "u" abbreviation
757 gdb_test "u" "The program is not running." "until \"u\" abbreviation"
759 gdb_test "until" "The program is not running." "until"
761 # FIXME -- need to dump full output to detailed log
762 send_gdb "undisplay\n"
764 -re "Delete all auto-display expressions.*y or n. $" {
767 -re "$gdb_prompt $" { pass "undisplay prompt" }
768 timeout { fail "(timeout) (timeout) undisplay prompt" }
771 timeout { fail "(timeout) (timeout) undisplay prompt" }
774 #test unset environment
775 send_gdb "unset environment\n"
777 -re "Delete all environment variables?.*y or n. $" {
780 -re "$gdb_prompt $" { pass "unset environmentprompt" }
782 fail "(timeout) (timeout) unset environment prompt"
787 fail "(timeout) (timeout) unset environment prompt"
792 gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand.(\[^\r\n\]*\[\r\n\])+List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "unset"
795 gdb_test "up-silently" "No stack." "up-silently"
797 gdb_test "watch" "Argument required .expression to compute.*" "watch"
799 gdb_test "whatis" "The history is empty." "whatis"
801 gdb_test "where" "No stack." "where"
803 #The case in which it prints a number is for vxgdb.
806 -re "0x0:.*Cannot access memory at address 0x0..*$gdb_prompt $" {
809 -re "0x0:.*Error accessing memory address 0x0:.*$gdb_prompt $" {
812 -re ".*$gdb_prompt $" { fail "x" }
813 timeout { fail "(timeout) x" }