gdb/testsuite/gdb.base/default.exp

   1 #   Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
   2 #   2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010
   3 #   Free Software Foundation, Inc.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  17
  18 # Start with a fresh gdb
  19
  20 gdb_exit
  21 gdb_start
  22
  23 set timeout 60
  24
  25 #
  26 # test default actions of gdb commands
  27 #
  28
  29 #load_lib gdb.exp
  30
  31 gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file"
  32
  33 # test append
  34 gdb_test "append" "\"append\" must be followed by a subcommand\.\[\r\n\]+List of append subcommands:.*"
  35 gdb_test "append binary" "\"append binary\" must be followed by a subcommand\.\[\r\n\]+List of append binary subcommands:.*"
  36 gdb_test "append memory" "Missing filename\."
  37 gdb_test "append value"  "Missing filename\."
  38 gdb_test "append binary memory" "Missing filename\."
  39 gdb_test "append binary value"  "Missing filename\."
  40
  41 setup_xfail "mips-idt-*"
  42 send_gdb "attach\n"
  43 gdb_expect {
  44     -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
  45                         { pass "attach" }
  46     -re "You can't do that when your target is `None'.*$gdb_prompt $"\
  47                         { pass "attach" }
  48     -re "You can't do that without a process to debug.*$gdb_prompt $"\
  49                         { pass "attach" }
  50     -re "Don't know how to attach.  Try \"help target\"..*$gdb_prompt $"\
  51                         { pass "attach" }
  52     -re "Kill it. .y or n." {
  53         send_gdb "y\n"
  54         exp_continue
  55     }
  56     -re "$gdb_prompt $" { fail "attach" }
  57     timeout { fail "(timeout) attach" }
  58 }
  59
  60 if ![target_info exists use_gdb_stub] {
  61     gdb_test "break" "No default breakpoint address now." "break"
  62     foreach i "b br bre brea" {
  63         gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation"
  64     }
  65
  66
  67     setup_xfail "mips-idt-*"
  68     gdb_test "backtrace" "No stack."
  69
  70     # ba and bac are no longer unique command prefixes. So these tests
  71     # elict an error from GDB.
  72     # GDB needs to be fixed to map unique alias here for ba bac.
  73     #
  74     foreach i "bt ba bac" {
  75         setup_xfail "mips-idt-*"
  76         gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
  77     }
  78 } else {
  79     warning "Skipping backtrace and break tests because of GDB stub."
  80 }
  81
  82 # This works on the MIPS IDT board, but confuses future tests.
  83 if ![istarget "mips-idt-*"] then {
  84     gdb_test "continue" "The program is not being run." "continue"
  85     gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
  86 }
  87
  88 #test call
  89 gdb_test "call" "The history is empty..*" "call"
  90
  91
  92 #test catch
  93 gdb_test "catch" "Catch requires an event name..*" "catch"
  94
  95 #test cd
  96 gdb_test "cd" "Argument required .new working directory.*" "cd"
  97
  98 #test clear
  99 gdb_test "clear" "No source file specified..*" "clear"
 100
 101 #test commands
 102 gdb_test "commands" "No breakpoint number 0..*" "commands"
 103
 104 #test condition
 105 gdb_test "condition" "Argument required .breakpoint number.*" "condition"
 106
 107 #test core-file
 108 gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file"
 109 #test delete "d" abbreviation
 110 gdb_test "d" "" "delete \"d\" abbreviation"
 111 #test delete
 112 gdb_test "delete" "" "delete"
 113 #test define
 114 gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define"
 115 #test delete breakpoints
 116 gdb_test "delete breakpoints" "" "delete breakpoints"
 117 #test delete display
 118 # FIXME -- need to dump full output to detailed log
 119 send_gdb "delete display\n"
 120 gdb_expect {
 121     -re "Delete all auto-display expressions.*y or n. $" {
 122         send_gdb "y\n"
 123         gdb_expect {
 124             -re "$gdb_prompt $"     { pass "delete display prompt" }
 125             timeout             { fail "(timeout) delete display prompt" }
 126         }
 127     }
 128     timeout             { fail "(timeout) delete display prompt" }
 129
 130 }
 131
 132 #test detach
 133 gdb_test "detach" "" "detach"
 134
 135 if [istarget "h8300-*-hms"] then {
 136     gdb_exit
 137     gdb_start
 138 }
 139
 140 #test directory
 141 # FIXME -- need to dump full output to detailed log
 142
 143 send_gdb "directory\n"
 144 gdb_expect {
 145     -re "Reinitialize source path to empty.*y or n. $"  {
 146         send_gdb "y\n"
 147         gdb_expect {
 148             -re "Source directories searched: .cdir\[:;\].cwd.*$gdb_prompt $"\
 149                     { pass "directory prompt" }
 150             timeout             { fail "(timeout) directory prompt" }
 151         }
 152     }
 153 }
 154
 155 #test disable "dis" abbreviation
 156 gdb_test "dis" "" "disable \"dis\" abbreviation"
 157 #test disable "disa" abbreviation
 158 gdb_test "disa" "" "disable \"disa\" abbreviation"
 159 #test disable
 160 gdb_test "disable" "" "disable"
 161 #test disable breakpoints
 162 gdb_test "disable breakpoints" "" "disable breakpoints"
 163 #test disable display
 164 gdb_test "disable display" "" "disable display"
 165 #test disassemble
 166 gdb_test "disassemble" "No frame selected." "disassemble"
 167 #test display
 168 gdb_test "display" "" "display"
 169 #test do
 170 gdb_test "do" "No stack." "do"
 171 #test document
 172 gdb_test "document" "Argument required .name of command to define.*" "document"
 173 #test down
 174 gdb_test "down" "No stack.*" "down"
 175 #test down-silently
 176 gdb_test "down-silently" "No stack." "down-silently"
 177 # test dump
 178 gdb_test "dump" "\"dump\" must be followed by a subcommand\.\[\r\n\]+List of dump subcommands:.*"
 179 gdb_test "dump binary" "\"dump binary\" must be followed by a subcommand\.\[\r\n\]+List of dump binary subcommands:.*"
 180 gdb_test "dump ihex" "\"dump ihex\" must be followed by a subcommand\.\[\r\n\]+List of dump ihex subcommands:.*"
 181 gdb_test "dump memory" "Missing filename\."
 182 gdb_test "dump srec" "\"dump srec\" must be followed by a subcommand\.\[\r\n\]+List of dump srec subcommands:.*"
 183 gdb_test "dump tekhex" "\"dump tekhex\" must be followed by a subcommand\.\[\r\n\]+List of dump tekhex subcommands:.*"
 184 gdb_test "dump value" "Missing filename\."
 185 gdb_test "dump binary memory" "Missing filename\."
 186 gdb_test "dump binary value"  "Missing filename\."
 187 gdb_test "dump ihex memory" "Missing filename\."
 188 gdb_test "dump ihex value"  "Missing filename\."
 189 gdb_test "dump srec memory" "Missing filename\."
 190 gdb_test "dump srec value"  "Missing filename\."
 191 gdb_test "dump tekhex memory" "Missing filename\."
 192 gdb_test "dump tekhex value"  "Missing filename\."
 193 #test echo
 194 gdb_test "echo" "" "echo"
 195 #test enable breakpoints delete
 196 gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete"
 197 #test enable breakpoints once
 198 gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once"
 199 #test enable breakpoints
 200 gdb_test "enable breakpoints" "" "enable breakpoints"
 201 #test enable delete
 202 gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete"
 203 #test enable display
 204 gdb_test "enable display" "" "enable display"
 205 #test enable once
 206 gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once"
 207 #test enable
 208 gdb_test "enable" "" "enable"
 209 #test exec-file
 210 send_gdb "exec-file\n"
 211 gdb_expect {
 212     -re "No executable file now..*$gdb_prompt $" {
 213         pass "exec-file"
 214     }
 215     -re "exec-file.*A program is being debugged already.  Kill it. .y or n.*$" {
 216         send_gdb "n\n"
 217         if $verbose>1 then {
 218             send_user "\tDidn't kill program being debugged\n"
 219         }
 220         gdb_expect -re "$gdb_prompt $" { }
 221         pass "exec-file"
 222     }
 223     -re "$gdb_prompt $" { fail "exec-file" }
 224     timeout             { fail "(timeout) exec-file" }
 225 }
 226
 227 #test frame "f" abbreviation
 228 gdb_test "f" "No stack." "frame \"f\" abbreviation"
 229 #test frame
 230 gdb_test "frame" "No stack." "frame"
 231 #test fg
 232 gdb_test "fg" "The program is not being run." "fg"
 233 # FIXME: fg kills the udi connection
 234 #test file
 235 send_gdb "file\n"
 236 gdb_expect {
 237     -re "No executable file now..*$gdb_prompt $"\
 238             { pass "file" }
 239     -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
 240         send_gdb "n\n"
 241         if $verbose>1 then {
 242             send_user "\t\tDidn't kill program being debugged\n"
 243         }
 244         gdb_expect -re "$gdb_prompt $" { }
 245         pass "file"
 246     }
 247     -re ".*$gdb_prompt $"       { fail "file" }
 248     timeout             { fail "(timeout) file" }
 249 }
 250
 251 #test finish
 252 gdb_test "finish" "The program is not running." "finish"
 253 #test forward-search
 254 # The message here comes from the regexp library, not gdb, and so can
 255 # vary on different systems.
 256 gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search"
 257 #test gcore
 258 send_gdb "gcore\n"
 259 gdb_expect {
 260     -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
 261         pass "gcore"
 262     }
 263     -re "Undefined command: .*$gdb_prompt $" {
 264         pass "gcore"
 265     }
 266     default { fail "gcore" }
 267 }
 268 send_gdb "generate-core-file\n"
 269 gdb_expect {
 270     -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
 271         pass "generate-core-file"
 272     }
 273     -re "Undefined command: .*$gdb_prompt $" {
 274         pass "generate-core-file"
 275     }
 276     default { fail "generate-core-file" }
 277 }
 278 #test help "h" abbreviation
 279 gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation"
 280 #test help
 281 gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help"
 282 #test handle
 283 gdb_test "handle" "Argument required .signal to handle.*" "handle"
 284 #test info "i" abbreviation
 285 gdb_test "i" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation"
 286 #test info
 287 gdb_test "info" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info"
 288 #test ignore
 289 gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore"
 290 #test info address
 291 gdb_test "info address" "Argument required." "info address"
 292 #test info all-registers
 293 gdb_test "info all-registers" "The program has no registers now." "info all-registers"
 294 #test info args
 295 gdb_test "info args" "No frame selected." "info args"
 296 #test info bogus-gdb-command
 297 gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\".  Try \"help info\".*" "info bogus-gdb-command"
 298 #test info breakpoints
 299 gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints"
 300 #test info catch
 301 gdb_test "info catch" "No frame selected." "info catch"
 302 #test info copying
 303 # FIXME -- doesn't work worth a shit
 304 #send_gdb "info copying"
 305 #       -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."#
 306 gdb_test "info copying"
 307 #       }
 308 #
 309 #
 310 #test info display
 311 gdb_test "info display" "There are no auto-display expressions now." "info display"
 312 #test info frame "f" abbreviation
 313 gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation"
 314 #test info frame
 315 gdb_test "info frame" "No stack.|No selected frame." "info frame"
 316 #test info files
 317 gdb_test "info files" "" "info files"
 318 #test info float
 319 gdb_test "info float" "The program has no registers now." "info float"
 320 #test info functions
 321 gdb_test "info functions" "All defined functions:" "info functions"
 322 #test info locals
 323 gdb_test "info locals" "No frame selected." "info locals"
 324 #test info program
 325 gdb_test "info program" "The program being debugged is not being run." "info program"
 326 #test info registers
 327 gdb_test "info registers" "The program has no registers now." "info registers"
 328 #test info stack "s" abbreviation
 329 gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
 330 #test info stack
 331 gdb_test "info stack" "No stack." "info stack"
 332 #test info set
 333 # FIXME -- needs to match the entire output
 334 # FIXME -- on native solaris 2.8, this test fails due to this line:
 335 #  prompt:  Gdb's prompt is "(gdb) ".^M
 336 gdb_test "info set" "confirm:  Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename:  The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize:  Number of source lines gdb will list by default is 10.*" "info set"
 337 gdb_test "info symbol" "Argument required .address.."
 338 #test info source
 339 gdb_test  "info source" "No current source file..*" "info source"
 340 #test info sources
 341 gdb_test "info sources" "No symbol table is loaded.  Use the \"file\" command.*" "info sources"
 342 #test info target
 343 gdb_test "info target" "" "info target"
 344 #test info terminal
 345 gdb_test "info terminal" "No saved terminal information." "info terminal"
 346 #test info types
 347 gdb_test "info types" "All defined types:" "info types"
 348 #test info variables
 349 gdb_test "info variables" "All defined variables:" "info variables"
 350 #test info vector
 351 gdb_test "info vector" "The program has no registers now." "info vector"
 352 #test info warranty
 353 gdb_test "info warranty" "15. *Disclaimer of Warranty.*" "info warranty"
 354 #test info watchpoints
 355 gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints"
 356 #test inspect
 357 gdb_test "inspect" "The history is empty." "inspect"
 358 #test jump
 359 gdb_test "jump" "The program is not being run." "jump"
 360 #test kill
 361 gdb_test "kill" "The program is not being run." "kill"
 362 #test list "l" abbreviation
 363 gdb_test "l" "No symbol table is loaded.  Use the \"file\" command.*" "list \"l\" abbreviation"
 364 #test list
 365 gdb_test "list" "No symbol table is loaded.  Use the \"file\" command.*" "list"
 366 #test load
 367 # The ``takes a file name'' case is for vxgdb.
 368 # The ``Use the "file" command'' case is for newer GDB versions which try
 369 # to deduce the filename from the exec file.
 370 gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
 371 #test next "n" abbreviation
 372 gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
 373 #test next
 374 gdb_test "next" "The program is not being run." "next"
 375 #test nexti "ni" abbreviation
 376 gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
 377 #test nexti
 378 gdb_test "nexti" "The program is not being run." "nexti"
 379 #test output
 380 gdb_test "output" "Argument required .expression to compute.*" "output"
 381
 382 #test overlay
 383 gdb_test "overlay" "\"overlay\" must be followed by the name of .*"
 384 #test a non-existant overlay subcommand
 385 gdb_test "overlay on"     "Undefined overlay command.* Try \"help overlay\"."
 386 gdb_test "overlay manual" "" "overlay manual #1"
 387 gdb_test "overlay auto"   ""
 388 gdb_test "overlay off"    ""
 389 gdb_test "overlay list"   "No sections are mapped."
 390 gdb_test "overlay map"    "Overlay debugging not enabled.*" "overlay map #1"
 391 gdb_test "overlay unmap"  "Overlay debugging not enabled.*" "overlay unmap #1"
 392 gdb_test "overlay manual" "" "overlay manual #2"
 393 gdb_test "overlay map"    "Argument required: name of an overlay section." "overlay map #2"
 394 gdb_test "overlay unmap"  "Argument required: name of an overlay section." "overlay unmap #2"
 395
 396 #test print "p" abbreviation
 397 gdb_test "p" "The history is empty." "print \"p\" abbreviation"
 398 #test print
 399 gdb_test "print" "The history is empty." "print"
 400 #test printf
 401 gdb_test "printf" "Argument required .format-control string and values to print.*" "printf"
 402 #test ptype
 403 gdb_test "ptype" "The history is empty." "ptype"
 404 #test pwd
 405 gdb_test "pwd" "Working directory .*" "pwd"
 406
 407 #test run "r" abbreviation
 408 if [istarget "*-*-vxworks*"] then {
 409     gdb_test "set args" "" ""
 410
 411     gdb_test "r" "Starting program: .*
 412 You must specify a function name to run, and arguments if any"\
 413                 "run \"r\" abbreviation"
 414     gdb_test "set args main" "" ""
 415
 416 } else {
 417     send_gdb "r\n"
 418     gdb_expect {
 419             -re "Starting program:  .*
 420 You can't do that when your target is `None'.*$gdb_prompt $"\
 421                         { pass "run \"r\" abbreviation" }
 422             -re "Starting program:  .*
 423 No executable file specified.*
 424 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
 425                         { pass "run \"r\" abbreviation" }
 426             -re "Starting program:  .*
 427 No executable specified, use .target exec.\\..*$gdb_prompt $"\
 428                         { pass "run \"r\" abbreviation" }
 429             -re "Starting program:  .*
 430 No image loaded into target.*$gdb_prompt $"\
 431                         { pass "run \"r\" abbreviation" }
 432             -re "Starting program:  .*
 433 No program loaded.*$gdb_prompt $"\
 434                         { pass "run \"r\" abbreviation" }
 435             -re "Don't know how to run.  Try \"help target\"..*$gdb_prompt $"\
 436                         { pass "run \"r\" abbreviation" }
 437             -re ".*$gdb_prompt $"       { fail "run \"r\" abbreviation" }
 438             timeout             { fail "(timeout) run \"r\" abbreviation" }
 439         }
 440 }
 441
 442 #test run
 443 if [istarget "*-*-vxworks*"] then {
 444     gdb_test "set args" "" ""
 445
 446     gdb_test "run" "Starting program: .*
 447 You must specify a function name to run, and arguments if any"
 448     gdb_test "set args main" "" ""
 449
 450 } else {
 451     send_gdb "run\n"
 452     gdb_expect {
 453             -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" }
 454             -re "Starting program:  .*
 455 No executable file specified.*
 456 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
 457                         { pass "run" }
 458             -re "Starting program:  .*
 459 No executable specified, use .target exec.\\..*$gdb_prompt $"\
 460                         { pass "run" }
 461             -re "Starting program:  .*
 462 No image loaded into target.*$gdb_prompt $"\
 463                         { pass "run" }
 464             -re "Starting program:  .*
 465 No program loaded.*$gdb_prompt $"\
 466                         { pass "run \"r\" abbreviation" }
 467             -re "Don't know how to run.  Try \"help target\"..*$gdb_prompt $"\
 468                         { pass "run" }
 469             -re ".*$gdb_prompt $"       { fail "run" }
 470             timeout             { fail "(timeout) run" }
 471         }
 472 }
 473
 474 #test rbreak
 475 gdb_test "rbreak" "" "rbreak"
 476
 477 # test restore
 478 gdb_test "restore" "You can't do that without a process to debug\."
 479
 480 #test return
 481 # The middle case accomodated the obsolete a29k, where doing the "ni"
 482 # above causes an initial stack to be created.
 483 gdb_test "return" "No selected frame..*" "return"  "Make .* return now.*y or n. $" "y"
 484
 485
 486 #test reverse-search
 487 gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
 488 #test step "s" abbreviation
 489 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
 490 #test step
 491 gdb_test "step" "The program is not being run." "step #1"
 492 #test search
 493 gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
 494 #test section
 495 gdb_test "section" "Must specify section name and its virtual address.*" "section"
 496 #test set annotate
 497 gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate"
 498 #test set args
 499 gdb_test "set args" "" "set args"
 500 #test set check "c" abbreviation
 501 gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation"
 502 #test set check "ch" abbreviation
 503 gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation"
 504 #test set check
 505 gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check"
 506 #test set check range
 507 gdb_test "set check range" "" "set check range"
 508 #test set check type
 509 gdb_test "set check type" "" "set check type"
 510 #test set complaints
 511 gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints"
 512 #test set confirm
 513 gdb_test "set confirm" "" "set confirm"
 514 # Don't test set editing. What if we're talking to a gdb that
 515 # won't do editing correctly while we're talking to it?
 516 # gdb_test "set editing" "" "set editing"
 517
 518 #test set environment
 519 gdb_test "set environment" "Argument required .environment variable and value.*" "set environment"
 520 #test set height
 521 gdb_test "set height" "Argument required .integer to set it to.*" "set height"
 522 #test set history expansion
 523 gdb_test "set history expansion" "" "set history expansion"
 524 #test set history filename
 525 gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename"
 526 #test set history save
 527 gdb_test "set history save" "" "set history save"
 528 #test set history size
 529 gdb_test "set history size" "Argument required .integer to set it to.*" "set history size"
 530 #test set history
 531 gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand.(\[^\r\n\]*\[\r\n\])+List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set history"
 532 #test set language
 533 gdb_test "set language" "Requires an argument. Valid arguments are auto, local, unknown, ada, c, c.., asm, minimal, fortran, objective-c, java, modula-2, pascal, scheme." "set language"
 534 #test set listsize
 535 gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize"
 536 #test set print "p" abbreviation
 537 gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation"
 538 #test set print "pr" abbreviation
 539 gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation"
 540 #test set print
 541 gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print"
 542 #test set print address
 543 gdb_test "set print address" "" "set print address"
 544 #test set print array
 545 gdb_test "set print array" "" "set print array"
 546 #test set print asm-demangle
 547 gdb_test "set print asm-demangle" "" "set print asm-demangle"
 548 #test set print demangle
 549 gdb_test "set print demangle" "" "set print demangle"
 550 #test set print elements
 551 gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements"
 552 #test set print object
 553 gdb_test "set print object" "" "set print object"
 554 #test set print pretty
 555 gdb_test "set print pretty" "" "set print pretty"
 556 #test set print sevenbit-strings
 557 gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings"
 558 #test set print union
 559 gdb_test "set print union" "" "set print union"
 560 #test set print vtbl
 561 gdb_test "set print vtbl" "" "set print vtbl"
 562 # FIXME -- need a test for "set prompt"
 563 #test set radix
 564 gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix"
 565 #test set symbol-reloading
 566 gdb_test "set symbol-reloading" "" "set symbol-reloading"
 567 #test set variable
 568 gdb_test "set variable" "Argument required .expression to compute.*" "set variable"
 569 #test set verbose
 570 gdb_test "set verbose" "" "set verbose"
 571 #test set width
 572 gdb_test "set width" "Argument required .integer to set it to.*" "set width"
 573 #test set write
 574 # This is only supported on targets which use exec.o.
 575 gdb_test "set write" "" "set write"
 576 #test set
 577 gdb_test "set" "Argument required .expression to compute.*" "set"
 578 #test shell echo Hi dad!
 579 gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!"
 580 #test show annotate
 581 gdb_test "show annotate" "Annotation_level is 0."        "show annotate"
 582 #test show args
 583 gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args"
 584 #test show check "c" abbreviation
 585 gdb_test "show c" "range:  *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type:  *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation"
 586 #test show check "ch" abbreviation
 587 gdb_test "show ch" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type:  *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation"
 588 #test show check
 589 gdb_test "show check" "range:  *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type:  *Type checking is \"auto; currently off\"." "show check"
 590 #test show check range
 591 gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range"
 592 #test show check type
 593 gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type"
 594 #test show commands
 595 gdb_test "show commands" "" "show commands"
 596 #test show complaints
 597 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints"
 598 #test show confirm
 599 gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm"
 600 #test show convenience
 601 gdb_test "show convenience" "\\\$_siginfo = void" "show convenience"
 602 #test show directories
 603 gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" "show directories"
 604 #test show editing
 605 gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing"
 606 #test show height
 607 gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height"
 608 #test show history expansion
 609 gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion"
 610 #test show history filename
 611 gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename"
 612 #test show history save
 613 gdb_test "show history save" "Saving of the history record on exit is on." "show history save"
 614 #test show history size
 615 gdb_test "show history size" "The size of the command history is.*" "show history size"
 616 #test show history
 617 gdb_test "show history" "expansion:  *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+filename:  *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+size: * The size of the command history is.*" "show history"
 618 #test show language
 619 gdb_test "show language" "The current source language is \"auto; currently c\"." "show language"
 620 #test show listsize
 621 gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize"
 622 #test show print "p" abbreviation
 623 gdb_test "show p" ".*" "show p"
 624 #test show print "pr" abbreviation
 625 gdb_test "show pr" ".*" "show pr"
 626 #test show print
 627 gdb_test "show print" "" "show print"
 628 #test show paths
 629 gdb_test "show paths" "Executable and object file path:.*" "show paths"
 630 #test show print address
 631 gdb_test "show print address" "Printing of addresses is on." "show print address"
 632 #test show print array
 633 gdb_test "show print array" "Prettyprinting of arrays is on." "show print array"
 634 #test show print asm-demangle
 635 gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." "show print asm-demangle"
 636 #test show print demangle
 637 gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." "show print demangle"
 638 #test show print elements
 639 gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements"
 640 #test show print object
 641 gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object"
 642 #test show print pretty
 643 gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty"
 644 #test show print sevenbit-strings
 645 gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings"
 646 #test show print union
 647 gdb_test "show print union" "Printing of unions interior to structures is on." "show print union"
 648 #test show print vtbl
 649 gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl"
 650 #test show prompt
 651 # In the FAIL case, can't just look for $gdb_prompt because that will match
 652 # the output, rather than the prompt. So look for $gdb_prompt at the start
 653 # of a line.
 654 gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt"
 655 #test show radix
 656 gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix"
 657 #test show symbol-reloading
 658 gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading"
 659 #test show user
 660 gdb_test "show user" "" "show user"
 661 #test show values
 662 gdb_test "show values" "" "show values"
 663 #test show verbose
 664 gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose"
 665 #test show version
 666 gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>(\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law.  Type \"show copying\"(\[^\r\n\]*\[\r\n\])+and \"show warranty\" for details..*" "show version"
 667 #test show width
 668 gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width"
 669 #test show write
 670 # This is only supported on targets which use exec.o.
 671 gdb_test "show write" "Writing into executable and core files is o.*" "show write"
 672 #test show
 673 gdb_test "show" "confirm:  *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename:  *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save:  *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size:  *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize:  *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements:  *Limit on string chars or array elements to print is 200..*" "show"
 674 #test stepi "si" abbreviation
 675 gdb_test  "si" "The program is not being run." "stepi \"si\" abbreviation"
 676 #test stepi
 677 gdb_test "stepi" "The program is not being run." "stepi"
 678 #test signal
 679 gdb_test "signal" "The program is not being run." "signal"
 680 #test source
 681 gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" "source"
 682 #test step "s" abbreviation
 683 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
 684 #test step
 685 gdb_test "step" "The program is not being run." "step #2"
 686 #test symbol-file
 687 gdb_test "symbol-file" "" "symbol-file"
 688
 689 #test target child
 690 gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\".  *Try \"help target\".*" "target child"
 691
 692 #test target procfs
 693 gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\".  *Try \"help target\".*" "target procfs"
 694
 695 #test target core
 696 send_gdb "target core\n"
 697 gdb_expect {
 698     -re "No core file specified..*$gdb_prompt $" { pass "target core" }
 699     -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
 700         send_gdb "n\n"
 701         if $verbose>1 then {
 702             send_user "\t\tDidn't kill program being debugged\n"
 703         }
 704         gdb_expect -re "$gdb_prompt $" { }
 705         pass "target core"
 706     }
 707     -re "Undefined target command: \"core\".  Try \"help target\"..*$gdb_prompt $" { pass "target core" }
 708     -re ".*$gdb_prompt $"       { fail "target core" }
 709     timeout             { fail "(timeout) target core" }
 710 }
 711
 712 #test target exec
 713 send_gdb "target exec\n"
 714 gdb_expect {
 715         -re "No executable file now..*$gdb_prompt $"\
 716                         { pass "target exec" }
 717         -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
 718             send_gdb "n\n"
 719             if $verbose>1 then {
 720                 send_user "\t\tDidn't kill program being debugged\n"
 721             }
 722             gdb_expect -re "$gdb_prompt $" { }
 723             pass "target exec"
 724         }
 725         -re ".*$gdb_prompt $"   { fail "target exec" }
 726         timeout         { fail "(timeout) target exec" }
 727         }
 728
 729 #test target remote
 730 if ![istarget "*-*-udi*"] then {
 731     send_gdb "target remote\n"
 732     gdb_expect {
 733         -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\
 734                         { pass "target remote" }
 735         -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
 736             send_gdb "n\n"
 737             if $verbose>1 then {
 738                 send_user "\t\tDidn't kill program being debugged\n"
 739             }
 740             gdb_expect -re "$gdb_prompt $" { }
 741             pass "target remote"
 742         }
 743         -re ".*$gdb_prompt $"   { fail "target remote" }
 744         timeout         { fail "(timeout) target remote" }
 745     }
 746 }
 747
 748 #test target
 749 gdb_test "target" "Argument required .target name.*" "target"
 750 #test tbreak
 751 gdb_test "tbreak" "No default breakpoint address now." "tbreak"
 752 #test tty
 753 gdb_test "tty" "Argument required .filename to set it to\..*" "tty"
 754 #test until "u" abbreviation
 755 gdb_test "u" "The program is not running." "until \"u\" abbreviation"
 756 #test until
 757 gdb_test "until" "The program is not running." "until"
 758 #test undisplay
 759 # FIXME -- need to dump full output to detailed log
 760 send_gdb "undisplay\n"
 761 gdb_expect {
 762     -re "Delete all auto-display expressions.*y or n. $" {
 763         send_gdb "y\n"
 764         gdb_expect {
 765             -re "$gdb_prompt $" { pass "undisplay prompt" }
 766             timeout { fail "(timeout) (timeout) undisplay prompt"    }
 767         }
 768     }
 769     timeout             { fail "(timeout) (timeout) undisplay prompt" }
 770 }
 771
 772 #test unset environment
 773 send_gdb "unset environment\n"
 774 gdb_expect {
 775     -re "Delete all environment variables?.*y or n. $" {
 776         send_gdb "y\n"
 777         gdb_expect {
 778             -re "$gdb_prompt $" { pass "unset environmentprompt" }
 779             timeout {
 780                 fail "(timeout) (timeout) unset environment prompt"
 781             }
 782         }
 783     }
 784     timeout {
 785         fail "(timeout) (timeout) unset environment prompt"
 786     }
 787 }
 788
 789 #test unset
 790 gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand.(\[^\r\n\]*\[\r\n\])+List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "unset"
 791 #test up
 792 #test up-silently
 793 gdb_test "up-silently" "No stack." "up-silently"
 794 #test watch
 795 gdb_test "watch" "Argument required .expression to compute.*" "watch"
 796 #test whatis
 797 gdb_test "whatis" "The history is empty." "whatis"
 798 #test where
 799 gdb_test "where" "No stack." "where"
 800 #test x
 801 gdb_test "x" "Argument required .starting display address.*" "x"
 802
 803 gdb_exit