1 # Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997, 1998
2 # Free Software Foundation, Inc.
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 2 of the License, or
7 # (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 # Please email any bugs, comments, and/or additions to this file to:
19 # bug-gdb@prep.ai.mit.edu
21 # Start with a fresh gdb
29 # test default actions of gdb commands
34 gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file"
36 setup_xfail "mips-idt-*"
39 -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
41 -re "You can't do that when your target is `None'.*$gdb_prompt $"\
43 -re "You can't do that without a process to debug.*$gdb_prompt $"\
45 -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\
47 -re "Kill it. .y or n." {
51 -re "$gdb_prompt $" { fail "attach" }
52 timeout { fail "(timeout) attach" }
55 # FIXME: attach kills the udi connection
56 if { [istarget "a29k-*-udi"] } {
61 if ![target_info exists use_gdb_stub] {
62 gdb_test "break" "No default breakpoint address now." "break"
63 foreach i "b br bre brea" {
64 gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation"
68 setup_xfail "mips-idt-*" "a29k-*-udi"
69 gdb_test "backtrace" "No stack."
71 # ba and bac are no longer unique command prefixes. So these tests
72 # elict an error from GDB.
73 # GDB needs to be fixed to map unique alias here for ba bac.
75 foreach i "bt ba bac" {
76 setup_xfail "mips-idt-*" "a29k-*-udi"
77 gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
80 warning "Skipping backtrace and break tests because of GDB stub."
83 # This works on the MIPS IDT board, but confuses future tests.
84 if ![istarget "mips-idt-*"] then {
85 setup_xfail "a29k-*-udi"
86 gdb_test "continue" "The program is not being run." "continue"
87 setup_xfail "a29k-*-udi"
88 gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
91 # FIXME: continue kills the udi connection
92 if [istarget "a29k-*-udi"] then {
98 gdb_test "call" "The history is empty..*" "call"
102 gdb_test "catch" "Catch requires an event name..*" "catch"
105 gdb_test "cd" "Argument required .new working directory.*" "cd"
108 gdb_test "clear" "No source file specified..*" "clear"
111 gdb_test "commands" "No breakpoint number 0..*" "commands"
114 gdb_test "condition" "Argument required .breakpoint number.*" "condition"
117 gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file"
118 #test delete "d" abbreviation
119 gdb_test "d" "" "delete \"d\" abbreviation"
121 gdb_test "delete" "" "delete"
123 gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define"
124 #test delete breakpoints
125 gdb_test "delete breakpoints" "" "delete breakpoints"
127 # FIXME -- need to dump full output to detailed log
128 send_gdb "delete display\n"
130 -re "Delete all auto-display expressions.*y or n. $" {
133 -re "$gdb_prompt $" { pass "delete display prompt" }
134 timeout { fail "(timeout) delete display prompt" }
137 timeout { fail "(timeout) delete display prompt" }
142 gdb_test "detach" "" "detach"
144 # FIXME: continue kills the udi connection
145 if [istarget "a29k-*-udi"] then {
149 if [istarget "h8300-*-hms"] then {
155 # FIXME -- need to dump full output to detailed log
157 send_gdb "directory\n"
159 -re "Reinitialize source path to empty.*y or n. $" {
162 -re "Source directories searched: .cdir:.cwd.*$gdb_prompt $"\
163 { pass "directory prompt" }
164 timeout { fail "(timeout) directory prompt" }
169 #test disable "dis" abbreviation
170 gdb_test "dis" "" "disable \"dis\" abbreviation"
171 #test disable "disa" abbreviation
172 gdb_test "disa" "" "disable \"disa\" abbreviation"
174 gdb_test "disable" "" "disable"
175 #test disable breakpoints
176 gdb_test "disable breakpoints" "" "disable breakpoints"
177 #test disable display
178 gdb_test "disable display" "" "disable display"
180 gdb_test "disassemble" "No frame selected." "disassemble"
182 gdb_test "display" "" "display"
184 gdb_test "do" "No stack." "do"
186 gdb_test "document" "Argument required .name of command to define.*" "document"
188 gdb_test "down" "No stack.*" "down"
190 gdb_test "down-silently" "No stack." "down-silently"
192 gdb_test "echo" "" "echo"
193 #test enable breakpoints delete
194 gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete"
195 #test enable breakpoints once
196 gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once"
197 #test enable breakpoints
198 gdb_test "enable breakpoints" "" "enable breakpoints"
200 gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete"
202 gdb_test "enable display" "" "enable display"
204 gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once"
206 gdb_test "enable" "" "enable"
208 send_gdb "exec-file\n"
210 -re "No executable file now..*$gdb_prompt $" {
213 -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" {
216 send_user "\tDidn't kill program being debugged\n"
218 gdb_expect -re "$gdb_prompt $" { }
221 -re "$gdb_prompt $" { fail "exec-file" }
222 timeout { fail "(timeout) exec-file" }
225 #test frame "f" abbreviation
226 setup_xfail "a29k-*-udi"
227 gdb_test "f" "No stack." "frame \"f\" abbreviation"
229 setup_xfail "a29k-*-udi"
230 gdb_test "frame" "No stack." "frame"
232 setup_xfail "a29k-*-udi"
233 gdb_test "fg" "The program is not being run." "fg"
234 # FIXME: fg kills the udi connection
238 -re "No executable file now..*$gdb_prompt $"\
240 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
243 send_user "\t\tDidn't kill program being debugged\n"
245 gdb_expect -re "$gdb_prompt $" { }
248 -re ".*$gdb_prompt $" { fail "file" }
249 timeout { fail "(timeout) file" }
253 setup_xfail "a29k-*-udi"
254 gdb_test "finish" "The program is not running." "finish"
256 # The message here comes from the regexp library, not gdb, and so can
257 # vary on different systems.
258 gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search"
259 #test help "h" abbreviation
260 gdb_test "h" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation"
262 gdb_test "help" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help"
264 gdb_test "handle" "Argument required .signal to handle.*" "handle"
265 #test info "i" abbreviation
266 gdb_test "i" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation"
268 gdb_test "info" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info"
270 gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore"
272 gdb_test "info address" "Argument required." "info address"
273 #test info all-registers
274 setup_xfail "a29k-*-udi"
275 gdb_test "info all-registers" "The program has no registers now." "info all-registers"
277 gdb_test "info args" "No frame selected." "info args"
278 #test info bogus-gdb-command
279 gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" "info bogus-gdb-command"
280 #test info breakpoints
281 gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints"
283 gdb_test "info catch" "You can't do that without a process to debug." "info catch"
285 # FIXME -- doesn't work worth a shit
286 #send_gdb "info copying"
287 # -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."#
288 gdb_test "info copying"
293 gdb_test "info display" "There are no auto-display expressions now." "info display"
294 #test info frame "f" abbreviation
295 gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation"
297 gdb_test "info frame" "No stack.|No selected frame." "info frame"
299 gdb_test "info files" "" "info files"
301 if [istarget "arm-*-*"] then {
302 gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
303 } elseif [istarget "thumb-*-*"] then {
304 gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
305 } elseif [istarget "strongarm-*-*"] then {
306 gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
308 gdb_test "info float" "No floating point info available for this processor." "info float"
311 gdb_test "info functions" "All defined functions:" "info functions"
313 gdb_test "info locals" "No frame selected." "info locals"
315 setup_xfail "a29k-*-udi"
316 gdb_test "info program" "The program being debugged is not being run." "info program"
318 setup_xfail "a29k-*-udi"
319 gdb_test "info registers" "The program has no registers now." "info registers"
320 #test info stack "s" abbreviation
321 setup_xfail "a29k-*-udi"
322 gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
324 setup_xfail "a29k-*-udi"
325 gdb_test "info stack" "No stack." "info stack"
327 # FIXME -- needs to match the entire output
328 gdb_test "info set" "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*..*\[\r\n\]+history filename: The filename in which to record the command history is .*\[\r\n\]+listsize: Number of source lines gdb will list by default is 10.*" "info set"
329 gdb_test "info symbol" "Argument required .address.."
331 gdb_test "info source" "No current source file..*" "info source"
333 gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources"
335 gdb_test "info target" "" "info target"
337 gdb_test "info terminal" "No saved terminal information." "info terminal"
339 gdb_test "info types" "All defined types:" "info types"
341 gdb_test "info variables" "All defined variables:" "info variables"
343 setup_xfail "hppa*-hp-hpux*"
344 gdb_test "info warranty" "NO WARRANTY.*\[\r\n\]+ *11. *BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY.*\[\r\n\]+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN.*\[\r\n\]+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES.*\[\r\n\]+PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED.*\[\r\n\]+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF.*\[\r\n\]+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS.*\[\r\n\]+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE.*\[\r\n\]+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,.*\[\r\n\]+REPAIR OR CORRECTION..*\[\r\n\]+ *12. *IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING.*\[\r\n\]+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR.*\[\r\n\]+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,.*\[\r\n\]+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING.*\[\r\n\]+OUT OF THE USE OR INABILITY TO USE THE PROGRAM .INCLUDING BUT NOT LIMITED.*\[\r\n\]+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY.*\[\r\n\]+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER.*\[\r\n\]+PROGRAMS., EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE.*\[\r\n\]+POSSIBILITY OF SUCH DAMAGES.*" "info warranty"
345 #test info watchpoints
346 gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints"
348 gdb_test "inspect" "The history is empty." "inspect"
350 setup_xfail "a29k-*-udi"
351 gdb_test "jump" "The program is not being run." "jump"
353 gdb_test "kill" "The program is not being run." "kill"
354 #test list "l" abbreviation
355 gdb_test "l" "No symbol table is loaded. Use the \"file\" command.*" "list \"l\" abbreviation"
357 gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" "list"
359 # The ``takes a file name'' case is for vxgdb.
360 # The ``Use the "file" command'' case is for newer GDB versions which try
361 # to deduce the filename from the exec file.
362 gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
363 #test next "n" abbreviation
364 setup_xfail "a29k-*-udi"
365 gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
367 setup_xfail "a29k-*-udi"
368 gdb_test "next" "The program is not being run." "next"
369 #test nexti "ni" abbreviation
370 setup_xfail "a29k-*-udi"
371 gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
373 setup_xfail "a29k-*-udi"
374 gdb_test "nexti" "The program is not being run." "nexti"
376 gdb_test "output" "Argument required .expression to compute.*" "output"
379 gdb_test "overlay" "\"overlay\" must be followed by the name of .*"
380 #test a non-existant overlay subcommand
381 gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"."
382 gdb_test "overlay manual" "" "overlay manual #1"
383 gdb_test "overlay auto" ""
384 gdb_test "overlay off" ""
385 gdb_test "overlay list" "No sections are mapped."
386 gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1"
387 gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #2"
388 gdb_test "overlay manual" "" "overlay manual #2"
389 gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2"
390 gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2"
392 #test print "p" abbreviation
393 gdb_test "p" "The history is empty." "print \"p\" abbreviation"
395 gdb_test "print" "The history is empty." "print"
397 gdb_test "printf" "Argument required .format-control string and values to print.*" "printf"
399 gdb_test "ptype" "The history is empty." "ptype"
401 gdb_test "pwd" "Working directory .*" "pwd"
403 #test run "r" abbreviation
404 if [istarget "*-*-vxworks*"] then {
405 gdb_test "set args" "" ""
407 gdb_test "r" "Starting program: .*
408 You must specify a function name to run, and arguments if any"\
409 "run \"r\" abbreviation"
410 gdb_test "set args main" "" ""
415 -re "Starting program: .*
416 You can't do that when your target is `None'.*$gdb_prompt $"\
417 { pass "run \"r\" abbreviation" }
418 -re "Starting program: .*
419 No executable file specified.*
420 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
421 { pass "run \"r\" abbreviation" }
422 -re "Starting program: .*
423 No image loaded into target.*$gdb_prompt $"\
424 { pass "run \"r\" abbreviation" }
425 -re "Starting program: .*
426 No program loaded.*$gdb_prompt $"\
427 { pass "run \"r\" abbreviation" }
428 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\
429 { pass "run \"r\" abbreviation" }
430 -re ".*$gdb_prompt $" { fail "run \"r\" abbreviation" }
431 timeout { fail "(timeout) run \"r\" abbreviation" }
436 if [istarget "*-*-vxworks*"] then {
437 gdb_test "set args" "" ""
439 gdb_test "run" "Starting program: .*
440 You must specify a function name to run, and arguments if any"
441 gdb_test "set args main" "" ""
446 -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" }
447 -re "Starting program: .*
448 No executable file specified.*
449 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
451 -re "Starting program: .*
452 No image loaded into target.*$gdb_prompt $"\
454 -re "Starting program: .*
455 No program loaded.*$gdb_prompt $"\
456 { pass "run \"r\" abbreviation" }
457 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\
459 -re ".*$gdb_prompt $" { fail "run" }
460 timeout { fail "(timeout) run" }
465 gdb_test "rbreak" "" "rbreak"
468 # The middle case accommodates the a29k, where doing the "ni" above causes
469 # an initial stack to be created.
470 gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y"
474 gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
475 #test step "s" abbreviation
476 setup_xfail "a29k-*-udi"
477 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
479 setup_xfail "a29k-*-udi"
480 gdb_test "step" "The program is not being run." "step #1"
482 gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
484 gdb_test "section" "Must specify section name and its virtual address.*" "section"
486 gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate"
488 gdb_test "set args" "" "set args"
489 #test set check "c" abbreviation
490 gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation"
491 #test set check "ch" abbreviation
492 gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation"
494 gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check"
495 #test set check range
496 gdb_test "set check range" "" "set check range"
498 gdb_test "set check type" "" "set check type"
500 gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints"
502 gdb_test "set confirm" "" "set confirm"
503 # Don't test set editing. What if we're talking to a gdb that
504 # won't do editing correctly while we're talking to it?
505 # gdb_test "set editing" "" "set editing"
507 #test set environment
508 gdb_test "set environment" "Argument required .environment variable and value.*" "set environment"
510 gdb_test "set height" "Argument required .integer to set it to.*" "set height"
511 #test set history expansion
512 gdb_test "set history expansion" "" "set history expansion"
513 #test set history filename
514 gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename"
515 #test set history save
516 gdb_test "set history save" "" "set history save"
517 #test set history size
518 gdb_test "set history size" "Argument required .integer to set it to.*" "set history size"
520 gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand..*\[\r\n\]+List of set history subcommands:.*\[\r\n\]+set history expansion -- Set history expansion on command input.*\[\r\n\]+set history filename -- Set the filename in which to record the command history.*\[\r\n\]+set history save -- Set saving of the history record on exit.*\[\r\n\]+set history size -- Set the size of the command history.*\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set history"
522 gdb_test "set language" "The currently understood settings are:.*\[\r\n\]+local or auto *Automatic setting based on source file.*\[\r\n\]+c *Use the C language.*\[\r\n\]+c\[+\]+ *Use the C\[+\]+ language.*\[\r\n\]+modula-2 *Use the Modula-2 language.*" "set language"
524 gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize"
525 #test set print "p" abbreviation
526 gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation"
527 #test set print "pr" abbreviation
528 gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation"
530 gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print"
531 #test set print address
532 gdb_test "set print address" "" "set print address"
533 #test set print array
534 gdb_test "set print array" "" "set print array"
535 #test set print asm-demangle
536 gdb_test "set print asm-demangle" "" "set print asm-demangle"
537 #test set print demangle
538 gdb_test "set print demangle" "" "set print demangle"
539 #test set print elements
540 gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements"
541 #test set print object
542 gdb_test "set print object" "" "set print object"
543 #test set print pretty
544 gdb_test "set print pretty" "" "set print pretty"
545 #test set print sevenbit-strings
546 gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings"
547 #test set print union
548 gdb_test "set print union" "" "set print union"
550 gdb_test "set print vtbl" "" "set print vtbl"
551 # FIXME -- need a test for "set prompt"
553 gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix"
554 #test set symbol-reloading
555 gdb_test "set symbol-reloading" "" "set symbol-reloading"
557 gdb_test "set variable" "Argument required .expression to compute.*" "set variable"
559 gdb_test "set verbose" "" "set verbose"
561 gdb_test "set width" "Argument required .integer to set it to.*" "set width"
563 # This is only supported on targets which use exec.o.
564 gdb_test "set write" "" "set write"
566 gdb_test "set" "Argument required .expression to compute.*" "set"
567 #test shell echo Hi dad!
568 gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!"
570 gdb_test "show annotate" "Annotation_level is 0." "show annotate"
572 gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args"
573 #test show check "c" abbreviation
574 gdb_test "show c" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation"
575 #test show check "ch" abbreviation
576 gdb_test "show ch" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation"
578 gdb_test "show check" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\"." "show check"
579 #test show check range
580 gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range"
581 #test show check type
582 gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type"
584 gdb_test "show commands" "" "show commands"
585 #test show complaints
586 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints"
588 gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm"
589 #test show convenience
590 gdb_test "show convenience" "No debugger convenience variables now defined..*\[\r\n\]+Convenience variables have names starting with \".\";.*\[\r\n\]+use \"set\" as in \"set .foo = 5\" to define them." "show convenience"
591 #test show directories
592 gdb_test "show directories" "Source directories searched: .cdir:.cwd" "show directories"
594 gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing"
596 gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height"
597 #test show history expansion
598 gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion"
599 #test show history filename
600 gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename"
601 #test show history save
602 gdb_test "show history save" "Saving of the history record on exit is on." "show history save"
603 #test show history size
604 gdb_test "show history size" "The size of the command history is.*" "show history size"
606 gdb_test "show history" "expansion: *History expansion on command input is o.*\[\r\n\]+filename: *The filename in which to record the command history is.*.gdb_history.*\[\r\n\]+save: *Saving of the history record on exit is o.*\[\r\n\]+size: * The size of the command history is.*" "show history"
608 gdb_test "show language" "The current source language is \"auto; currently c\"." "show language"
610 gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize"
611 #test show print "p" abbreviation
612 gdb_test "show p" ".*" "show p"
613 #test show print "pr" abbreviation
614 gdb_test "show pr" ".*" "show pr"
616 gdb_test "show print" "" "show print"
618 gdb_test "show paths" "Executable and object file path:.*" "show paths"
619 #test show print address
620 gdb_test "show print address" "Printing of addresses is on." "show print address"
621 #test show print array
622 gdb_test "show print array" "Prettyprinting of arrays is on." "show print array"
623 #test show print asm-demangle
624 gdb_test "show print asm-demangle" "Demangling of C\[+\]+ names in disassembly listings is on." "show print asm-demangle"
625 #test show print demangle
626 gdb_test "show print demangle" "Demangling of encoded C\[+\]+ names when displaying symbols is on." "show print demangle"
627 #test show print elements
628 gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements"
629 #test show print object
630 gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object"
631 #test show print pretty
632 gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty"
633 #test show print sevenbit-strings
634 gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings"
635 #test show print union
636 gdb_test "show print union" "Printing of unions interior to structures is on." "show print union"
637 #test show print vtbl
638 gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl"
640 # In the FAIL case, can't just look for $gdb_prompt because that will match
641 # the output, rather than the prompt. So look for $gdb_prompt at the start
643 gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt"
645 gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix"
646 #test show symbol-reloading
647 gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading"
649 gdb_test "show user" "" "show user"
651 gdb_test "show values" "" "show values"
653 gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose"
655 setup_xfail "hppa*-hp-hpux*"
656 gdb_test "show version" "GNU gdb \[0-9\.\]*.*\[\r\n\]+Copyright \[0-9\]* Free Software Foundation, Inc.*\[\r\n\]+GDB is free software, covered by the GNU General Public License, and you are.*\[\r\n\]+welcome to change it and/or distribute copies of it under certain conditions.*\[\r\n\]+Type \"show copying\" to see the conditions.*\[\r\n\]+There is absolutely no warranty for GDB. Type \"show warranty\" for details.*\[\r\n\]+This GDB was configured as .*|GDB is free software and you are welcome to distribute copies of it.*\[\r\n\]+ under certain conditions; type \"show copying\" to see the conditions..*\[\r\n\]+There is absolutely no warranty for GDB; type \"show warranty\" for details..*\[\r\n\]+GDB.*Copyright \[0-9\]* Free Software Foundation, Inc.*" "show version"
658 gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width"
660 # This is only supported on targets which use exec.o.
661 gdb_test "show write" "Writing into executable and core files is o.*" "show write"
663 gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on..*\[\r\n\]+history filename: *The filename in which to record the command history is .*\[\r\n\]+history save: *Saving of the history record on exit is on..*\[\r\n\]+history size: *The size of the command history is.*\[\r\n\]+listsize: *Number of source lines gdb will list by default is 10.*\[\r\n\]+print elements: *Limit on string chars or array elements to print is 200..*" "show"
664 #test stepi "si" abbreviation
665 setup_xfail "a29k-*-udi"
666 gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation"
668 setup_xfail "a29k-*-udi"
669 gdb_test "stepi" "The program is not being run." "stepi"
671 setup_xfail "a29k-*-udi"
672 gdb_test "signal" "The program is not being run." "signal"
674 gdb_test "source" "source command requires pathname of file to source..*|No such file or directory.*" "source"
675 #test step "s" abbreviation
676 setup_xfail "a29k-*-udi"
677 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
679 setup_xfail "a29k-*-udi"
680 gdb_test "step" "The program is not being run." "step #2"
682 gdb_test "symbol-file" "" "symbol-file"
685 gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\". *Try \"help target\".*" "target child"
688 gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\". *Try \"help target\".*" "target procfs"
691 send_gdb "target core\n"
693 -re "No core file specified..*$gdb_prompt $" { pass "target core" }
694 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
697 send_user "\t\tDidn't kill program being debugged\n"
699 gdb_expect -re "$gdb_prompt $" { }
702 -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" }
703 -re ".*$gdb_prompt $" { fail "target core" }
704 timeout { fail "(timeout) target core" }
708 send_gdb "target exec\n"
710 -re "No executable file now..*$gdb_prompt $"\
711 { pass "target exec" }
712 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
715 send_user "\t\tDidn't kill program being debugged\n"
717 gdb_expect -re "$gdb_prompt $" { }
720 -re ".*$gdb_prompt $" { fail "target exec" }
721 timeout { fail "(timeout) target exec" }
725 if ![istarget "*-*-udi*"] then {
726 send_gdb "target remote\n"
728 -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system .e.g. /dev/ttya.*$gdb_prompt $"\
729 { pass "target remote" }
730 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
733 send_user "\t\tDidn't kill program being debugged\n"
735 gdb_expect -re "$gdb_prompt $" { }
738 -re ".*$gdb_prompt $" { fail "target remote" }
739 timeout { fail "(timeout) target remote" }
744 gdb_test "target" "Argument required .target name.*" "target"
746 gdb_test "tbreak" "No default breakpoint address now." "tbreak"
748 gdb_test "tty" "Argument required .terminal name for running target process.*" "tty"
749 #test until "u" abbreviation
750 setup_xfail "a29k-*-udi"
751 gdb_test "u" "The program is not running." "until \"u\" abbreviation"
753 setup_xfail "a29k-*-udi"
754 gdb_test "until" "The program is not running." "until"
756 # FIXME -- need to dump full output to detailed log
757 send_gdb "undisplay\n"
759 -re "Delete all auto-display expressions.*y or n. $" {
762 -re "$gdb_prompt $" { pass "undisplay prompt" }
763 timeout { fail "(timeout) (timeout) undisplay prompt" }
766 timeout { fail "(timeout) (timeout) undisplay prompt" }
769 #test unset environment
770 send_gdb "unset environment\n"
772 -re "Delete all environment variables?.*y or n. $" {
775 -re "$gdb_prompt $" { pass "unset environmentprompt" }
777 fail "(timeout) (timeout) unset environment prompt"
782 fail "(timeout) (timeout) unset environment prompt"
787 gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand..*\[\r\n\]+List of unset subcommands:.*\[\r\n\]+unset environment -- Cancel environment variable VAR for the program.*\[\r\n\]+Type \"help unset\" followed by unset subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "unset"
790 gdb_test "up-silently" "No stack." "up-silently"
792 gdb_test "watch" "Argument required .expression to compute.*" "watch"
794 gdb_test "whatis" "The history is empty." "whatis"
796 setup_xfail "a29k-*-udi"
797 gdb_test "where" "No stack." "where"
799 #The case in which it prints a number is for vxgdb.
802 -re "0x0:.*Cannot access memory at address 0x0..*$gdb_prompt $" {
805 -re "0x0:.*Error accessing memory address 0x0:.*$gdb_prompt $" {
808 -re ".*$gdb_prompt $" { fail "x" }
809 timeout { fail "(timeout) x" }