gdb/testsuite/gdb.base/list.exp

   1 # Copyright 1992-2014 Free Software Foundation, Inc.
   2
   3 # This program is free software; you can redistribute it and/or modify
   4 # it under the terms of the GNU General Public License as published by
   5 # the Free Software Foundation; either version 3 of the License, or
   6 # (at your option) any later version.
   7 #
   8 # This program is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 # GNU General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU General Public License
  14 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15
  16 # This file was written by Fred Fish. (fnf@cygnus.com)
  17
  18
  19 standard_testfile list0.c list1.c
  20
  21 # Need to download the header to the host.
  22 gdb_remote_download host ${srcdir}/${subdir}/list0.h
  23
  24 if {[prepare_for_testing $testfile.exp $testfile [list $srcfile $srcfile2] \
  25          {debug}]} {
  26     return -1
  27 }
  28
  29 # Create and source the file that provides information about the compiler
  30 # used to compile the test case.
  31 if [get_compiler_info] {
  32     return -1
  33 }
  34
  35 # The last line in the file.
  36 set last_line [gdb_get_line_number "last line" "list0.c"]
  37
  38 # Regex matching the last line in the file.
  39 set last_line_re "${last_line}\[ \t\]+} /\\* last line \\*/"
  40
  41 #
  42 # Local utility proc just to set and verify listsize
  43 # Return 1 if success, 0 if fail.
  44 #
  45
  46 set set_listsize_count 0
  47
  48 proc set_listsize { arg } {
  49     global gdb_prompt
  50     global set_listsize_count
  51
  52     incr set_listsize_count
  53     if [gdb_test_no_output "set listsize $arg" "setting listsize to $arg #$set_listsize_count"] {
  54         return 0
  55     }
  56     if { $arg == 0 } {
  57         set arg "unlimited"
  58     }
  59
  60     if [gdb_test "show listsize" "Number of source lines.* is ${arg}.*" "show listsize $arg #$set_listsize_count"] {
  61         return 0
  62     }
  63     return 1
  64 }
  65
  66 #
  67 # Test display of listsize lines around a given line number.
  68 #
  69
  70 proc test_listsize {} {
  71     global gdb_prompt
  72     global hp_cc_compiler
  73     global hp_aCC_compiler
  74     global last_line_re
  75
  76     # Show default size
  77
  78     gdb_test "show listsize" "Number of source lines gdb will list by default is 10.*" "show default list size"
  79
  80     # Show the default lines
  81
  82     gdb_test "list" "(1\[ \t\]+#include \"list0.h\".*7\[ \t\]+x = 0;\r\n.*10\[ \t\]+foo .x\[+)\]+;)" "list default lines around main"
  83
  84     # Ensure we can limit printouts to one line
  85
  86     if [set_listsize 1] {
  87         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"" "list line 1 with listsize 1"
  88         gdb_test "list 2" "2\[ \t\]+" "list line 2 with listsize 1"
  89     }
  90
  91     # Try just two lines
  92
  93     if [ set_listsize 2 ] {
  94         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 1 with listsize 2"
  95         gdb_test "list 2" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 2 with listsize 2"
  96         gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+" "list line 3 with listsize 2"
  97     }
  98
  99     # Try small listsize > 1 that is an odd number
 100
 101     if [ set_listsize 3 ] {
 102         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 1 with listsize 3"
 103         gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 2 with listsize 3"
 104         gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[(\]+\[)\]+\r\n4\[ \t\]+\{" "list line 3 with listsize 3"
 105     }
 106
 107     # Try small listsize > 2 that is an even number.
 108
 109     if [ set_listsize 4 ] then {
 110         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 1 with listsize 4"
 111         gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 2 with listsize 4"
 112
 113         gdb_test "list 3" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 3 with listsize 4"
 114         gdb_test "list 4" "2\[ \t\]+\r\n.*5\[ \t\]+int x;.*" "list line 4 with listsize 4"
 115     }
 116
 117     # Try a size larger than the entire file.
 118
 119     if [ set_listsize 100 ] then {
 120         gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*\r\n${last_line_re}" "list line 1 with listsize 100"
 121
 122         gdb_test "list 10" "1\[ \t\]+#include \"list0.h\".*\r\n${last_line_re}" "list line 10 with listsize 100"
 123     }
 124
 125     # Try listsize of 0 which is special, and means unlimited.
 126
 127     set_listsize 0
 128     gdb_test "list 1" "1\[ \t\]+#include .*\r\n${last_line_re}" "list line 1 with unlimited listsize"
 129 }
 130
 131 #
 132 # Test "list filename:number" for C include file
 133 #
 134
 135 proc test_list_include_file {} {
 136     global gdb_prompt
 137
 138     setup_xfail_format "COFF"
 139     gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*10\[ \t\]+bar \\(x\\+\\+\\);" "list line 1 in include file"
 140
 141     setup_xfail_format "COFF"
 142     gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 3\[67\] lines." "list message for lines past EOF"
 143 }
 144
 145 #
 146 # Test "list filename:number" for C source file
 147 #
 148
 149 proc test_list_filename_and_number {} {
 150     global gdb_prompt
 151
 152     set testcnt 0
 153
 154     send_gdb "list list0.c:1\n"
 155     gdb_expect {
 156         -re "1\[ \t\]+#include \"list0.h\".*10\[ \t\]+foo .x\[+)\]+;\r\n$gdb_prompt $" {
 157             incr testcnt
 158         }
 159         -re ".*$gdb_prompt $" { fail "list list0.c:1" ; gdb_suppress_tests }
 160         timeout { fail "list list0.c:1 (timeout)" ; gdb_suppress_tests }
 161     }
 162     send_gdb "list list0.c:10\n"
 163     gdb_expect {
 164         -re "5\[ \t\]+int x;.*14\[ \t\]+foo .x\[+)\]+;\r\n$gdb_prompt $" {
 165             incr testcnt
 166         }
 167         -re ".*$gdb_prompt $" { fail "list list.c:10" ; gdb_suppress_tests }
 168         timeout { fail "list list.c:10 (timeout)" ; gdb_suppress_tests }
 169     }
 170     send_gdb "list list1.c:1\n"
 171     gdb_expect {
 172         -re "1\[ \t\]+\#include.*4\[ \t\]+.*int oof\[ \t\]*\(.*\);\r\n.*$gdb_prompt $" {
 173             incr testcnt
 174         }
 175         -re ".*$gdb_prompt $" { fail "list list1.c:1" ; gdb_suppress_tests }
 176         timeout { fail "list list1.c:1 (timeout)" ; gdb_suppress_tests }
 177     }
 178     send_gdb "list list1.c:12\n"
 179     gdb_expect {
 180         -re "12\[ \t\]+long_line \[(\]+.*\[)\]+;.*13\[ \t\]+\}\r\n.*$gdb_prompt $" {
 181             incr testcnt
 182         }
 183         -re ".*$gdb_prompt $" { fail "list list1.c:12" ; gdb_suppress_tests }
 184         timeout { fail "list list1.c:12 (timeout)" ; gdb_suppress_tests }
 185     }
 186     pass "list filename:number ($testcnt tests)"
 187     gdb_stop_suppressing_tests
 188 }
 189
 190 #
 191 # Test "list function" for C source file
 192 #
 193
 194 proc test_list_function {} {
 195     global gdb_prompt
 196
 197     # gcc appears to generate incorrect debugging information for code
 198     # in include files, which breaks this test.
 199     # SunPRO cc is the second case below, it's also correct.
 200     gdb_test "list main" "(5\[ \t\]+int x;.*8\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*7\[ \t\]+x = 0;)" "list function in source file 1"
 201
 202     # Ultrix gdb takes the second case below; it's also correct.
 203     # SunPRO cc is the third case.
 204     gdb_test "list bar" "(4\[ \t\]+void.*\[ \t\]*long_line.*;.*bar.*9\[ \t\]*.*|1\[ \t\]+void.*8\[ \t\]+\}|1\[ \t\]+void.*7\[ \t\]*long_line ..;|7\[ \t\]+void.*14\[ \t\]+\})" "list function in source file 2"
 205
 206     # Test "list function" for C include file
 207     # Ultrix gdb is the second case, still correct.
 208     # SunPRO cc is the third case.
 209     gdb_test "list foo" "(3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;|2\[ \t\]+including file.*11\[ \t\]+bar \[(\]+.*\[)\]+;|1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;)" "list function in include file"
 210 }
 211
 212 proc test_list_forward {} {
 213     global gdb_prompt
 214     global last_line_re
 215
 216     set testcnt 0
 217
 218     send_gdb "list list0.c:10\n"
 219     gdb_expect {
 220         -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 221         -re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests }
 222         timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests }
 223     }
 224
 225     send_gdb "list\n"
 226     gdb_expect {
 227         -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 228         -re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests }
 229         timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests }
 230     }
 231
 232     send_gdb "list\n"
 233     gdb_expect {
 234         -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 235         -re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests }
 236         timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests }
 237     }
 238
 239     send_gdb "list\n"
 240     gdb_expect {
 241         -re "35\[ \t\]+foo \\(.*\\);.*${last_line_re}\r\n$gdb_prompt $" { incr testcnt }
 242         -re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests }
 243         timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests }
 244     }
 245
 246     pass "successive list commands to page forward ($testcnt tests)"
 247     gdb_stop_suppressing_tests
 248 }
 249
 250 # Test that repeating the list linenum command doesn't print the same
 251 # lines over again.  Note that this test makes sure that the argument
 252 # linenum is dropped, when we repeat the previous command. 'x/5i $pc'
 253 # works the same way.
 254
 255 proc test_repeat_list_command {} {
 256     global gdb_prompt
 257     global last_line_re
 258
 259     set testcnt 0
 260
 261     send_gdb "list list0.c:10\n"
 262     gdb_expect {
 263         -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 264         -re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests }
 265         timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests }
 266     }
 267
 268     send_gdb "\n"
 269     gdb_expect {
 270         -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 271         -re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests }
 272         timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests }
 273     }
 274
 275     send_gdb "\n"
 276     gdb_expect {
 277         -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 278         -re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests }
 279         timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests }
 280     }
 281
 282     send_gdb "\n"
 283     gdb_expect {
 284         -re "35\[ \t\]+foo \\(.*\\);.*${last_line_re}\r\n$gdb_prompt $" { incr testcnt }
 285         -re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests }
 286         timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests }
 287     }
 288
 289     pass "repeat list commands to page forward using 'return' ($testcnt tests)"
 290     gdb_stop_suppressing_tests
 291 }
 292
 293 proc test_list_backwards {} {
 294     global gdb_prompt
 295
 296     set testcnt 0
 297
 298     send_gdb "list list0.c:33\n"
 299     gdb_expect {
 300         -re "28\[ \t\]+foo \\(.*\\);.*37\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt }
 301         -re ".*$gdb_prompt $" { fail "list list0.c:33" ; gdb_suppress_tests }
 302         timeout { fail "list list0.c:33 (timeout)" ; gdb_suppress_tests }
 303     }
 304
 305     send_gdb "list -\n"
 306     gdb_expect {
 307         -re "18\[ \t\]+foo \[(\]+.*\[)\]+;.*27\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 308         -re ".*$gdb_prompt $" { fail "list 18-27" ; gdb_suppress_tests }
 309         timeout { fail "list 18-27 (timeout)" ; gdb_suppress_tests }
 310     }
 311
 312     send_gdb "list -\n"
 313     gdb_expect {
 314         -re "8\[ \t\]+foo \[(\]+.*\[)\]+;.*17\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
 315         -re ".*$gdb_prompt $" { fail "list 8-17" ; gdb_suppress_tests }
 316         timeout { fail "list 8-17 (timeout)" ; gdb_suppress_tests }
 317     }
 318
 319     send_gdb "list -\n"
 320     gdb_expect {
 321         -re "1\[ \t\]+#include .*7\[ \t\]+x = 0;\r\n$gdb_prompt $" { incr testcnt }
 322         -re ".*$gdb_prompt $" { fail "list 1-7" ; gdb_suppress_tests }
 323         timeout { fail "list 1-7 (timeout)" ; gdb_suppress_tests }
 324     }
 325
 326     pass "$testcnt successive \"list -\" commands to page backwards"
 327     gdb_stop_suppressing_tests
 328 }
 329
 330 #
 331 # Test "list first,last"
 332 #
 333
 334 proc test_list_range {} {
 335     global gdb_prompt
 336     global last_line_re
 337     global last_line
 338
 339     gdb_test "list list0.c:2,list0.c:5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; filename:line1,filename:line2"
 340
 341     gdb_test "list 2,5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; line1,line2"
 342
 343 #    gdb_test     "list -1,6"   "Line number 0 out of range; .*list0.c has 39 lines." "list range; lower bound negative"
 344
 345 #    gdb_test     "list -100,-40"       "Line number -60 out of range; .*list0.c has 39 lines." "list range; both bounds negative"
 346
 347     set past_end [expr ${last_line} + 10]
 348     set much_past_end [expr ${past_end} + 10]
 349
 350     gdb_test "list 30,${past_end}" "30\[ \t\]+foo \(.*\);.*${last_line_re}" "list range; upper bound past EOF"
 351
 352     gdb_test "list ${past_end},${much_past_end}" "Line number ${past_end} out of range; .*list0.c has ${last_line} lines." "list range; both bounds past EOF"
 353
 354     gdb_test "list list0.c:2,list1.c:17" "Specified start and end are in different files." "list range, must be same files"
 355 }
 356
 357 #
 358 # Test "list filename:function"
 359 #
 360
 361 proc test_list_filename_and_function {} {
 362     global gdb_prompt
 363     global last_line_re
 364
 365     set testcnt 0
 366
 367     # gcc appears to generate incorrect debugging information for code
 368     # in include files, which breaks this test.
 369     # SunPRO cc is the second case below, it's also correct.
 370     send_gdb "list list0.c:main\n"
 371     gdb_expect {
 372         -re "1\[ \t\]+#include .*10\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 373             incr testcnt
 374         }
 375         -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 376             pass "list function in source file 1"
 377         }
 378         -re ".*$gdb_prompt $" { fail "list list0.c:main" }
 379         timeout { fail "list list0.c:main (timeout)" }
 380     }
 381
 382     # Not sure what the point of having this function be unused is.
 383     # AIX is legitimately removing it.
 384     setup_xfail "rs6000-*-aix*"
 385     send_gdb "list list0.c:unused\n"
 386     gdb_expect {
 387         -re "40\[ \t\]+unused.*${last_line_re}\r\n$gdb_prompt $" {
 388             incr testcnt
 389         }
 390         -re "37.*42\[ \t\]+\}\r\n$gdb_prompt $" {
 391             incr testcnt
 392         }
 393         -re ".*$gdb_prompt $" { fail "list list0.c:unused" }
 394         timeout { fail "list list0.c:unused (timeout)" }
 395     }
 396     clear_xfail "rs6000-*-aix*"
 397
 398     # gcc appears to generate incorrect debugging information for code
 399     # in include files, which breaks this test.
 400     # Ultrix gdb is the second case, one line different but still correct.
 401     # SunPRO cc is the third case.
 402     setup_xfail "rs6000-*-*" 1804
 403     setup_xfail_format "COFF"
 404     send_gdb "list list0.h:foo\n"
 405     gdb_expect {
 406         -re "2\[ \t\]+including file.  This.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 407             incr testcnt
 408         }
 409         -re "1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 410             incr testcnt
 411         }
 412         -re "3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
 413             incr testcnt
 414         }
 415         -re "No source file named list0.h.\r\n$gdb_prompt $" {
 416             fail "list list0.h:foo"
 417         }
 418         -re ".*$gdb_prompt $" { fail "list list0.h:foo" }
 419         timeout { fail "list list0.h:foo (timeout)" }
 420     }
 421
 422     # Ultrix gdb is the second case.
 423     send_gdb "list list1.c:bar\n"
 424     gdb_expect {
 425         -re "4\[ \t\]+void.*13\[ \t\]+\}\r\n$gdb_prompt $" {
 426             incr testcnt
 427         }
 428         -re "4\[ \t\]+void.*12\[ \t\]*long_line ..;\r\n$gdb_prompt $" {
 429             incr testcnt
 430         }
 431         -re "4\[ \t\]+void.*11\[ \t\]*\r\n$gdb_prompt $" {
 432             incr testcnt
 433         }
 434         -re ".*$gdb_prompt $" { fail "list list1.c:bar" }
 435         timeout { fail "list list1.c:bar (timeout)" }
 436     }
 437
 438     # Not sure what the point of having this function be unused is.
 439     # AIX is legitimately removing it.
 440     setup_xfail "rs6000-*-aix*"
 441     send_gdb "list list1.c:unused\n"
 442     gdb_expect {
 443         -re "12\[ \t\]+long_line \[(\]\[)\];.*13\[ \t\]+\}\r\n.*$gdb_prompt $" {
 444             incr testcnt
 445         }
 446         -re "14.*19\[ \t\]+\}\r\n.*$gdb_prompt $" {
 447             incr testcnt
 448         }
 449         -re ".*$gdb_prompt $" { fail "list list1.c:unused" }
 450         timeout { fail "list list1.c:unused (timeout)" }
 451     }
 452     clear_xfail "rs6000-*-aix*"
 453
 454     pass "list filename:function ($testcnt tests)"
 455
 456     # Test with quoting.
 457     gdb_test "list 'list0.c:main'" "int main.*"
 458
 459     # Test some invalid specs
 460     # The following test takes the FIXME result on most systems using
 461     # DWARF.  It fails to notice that main() is not in the file requested.
 462
 463     setup_xfail "*-*-*"
 464
 465 # Does this actually work ANYWHERE?  I believe not, as this is an `aspect' of
 466 # lookup_symbol(), where, when it is given a specific symtab which does not
 467 # contain the requested symbol, it will subsequently search all of the symtabs
 468 # for the requested symbol.
 469
 470     gdb_test "list list0.c:foo" "Function \"foo\" not defined in .*list0.c" "list filename:function; wrong filename rejected"
 471
 472     gdb_test "list foobar.c:main" "No source file named foobar.c.|Location not found" "list filename:function; nonexistant file"
 473
 474     gdb_test "list list0.h:foobar" "Function \"foobar\" not defined in \"list0.h\"." "list filename:function; nonexistant function"
 475
 476 }
 477
 478 proc test_forward_search {} {
 479         global timeout
 480
 481         gdb_test_no_output "set listsize 4"
 482         # On SunOS4, this gives us lines 19-22.  On AIX, it gives us
 483         # lines 20-23.  This depends on whether the line number of a function
 484         # is considered to be the openbrace or the first statement--either one
 485         # is acceptable.
 486         gdb_test "list long_line" "24\[ \t\]+long_line .*"
 487
 488         gdb_test "search 4321" " not found"
 489
 490         gdb_test "search 6789" "28\[ \t\]+oof .6789.;"
 491
 492         # Test that GDB won't crash if the line being searched is extremely long.
 493
 494         set oldtimeout $timeout
 495         set timeout [expr "$timeout + 300"]
 496         verbose "Timeout is now $timeout seconds" 2
 497         gdb_test "search 1234" ".*1234.*" "search extremely long line (> 5000 chars)"
 498         set timeout $oldtimeout
 499         verbose "Timeout is now $timeout seconds" 2
 500 }
 501
 502 proc test_only_end {} {
 503     gdb_test_no_output "set listsize 2"
 504     gdb_test "list 1" "list 1\r\n1\[ \t\]\[^\r\n\]*\r\n2\[ \t\]\[^\r\n\]*"
 505     gdb_test "list ,5" "list ,5\r\n4\[ \t\]\[^\r\n\]*\r\n5\[ \t\]\[^\r\n\]*"
 506 }
 507
 508 # Start with a fresh gdb.
 509
 510 gdb_exit
 511 gdb_start
 512 gdb_reinitialize_dir $srcdir/$subdir
 513 gdb_file_cmd ${binfile}
 514
 515 gdb_test_no_output "set width 0"
 516
 517 test_listsize
 518 get_debug_format
 519 if [ set_listsize 10 ] then {
 520     test_list_include_file
 521     test_list_filename_and_number
 522     test_list_function
 523     test_list_forward
 524     test_list_backwards
 525     test_repeat_list_command
 526     test_list_range
 527     test_list_filename_and_function
 528     test_forward_search
 529     test_only_end
 530 }
 531
 532 remote_exec build "rm -f list0.h"