1 # Copyright 1992, 1994, 1996, 1997, 1998, 2001, 2003, 2007, 2008, 2009, 2010,
2 # 2011 Free Software Foundation, Inc.
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 3 of the License, or
7 # (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program. If not, see <http://www.gnu.org/licenses/>.
17 # This file was written by Michael Snyder (msnyder@cygnus.com)
24 set testfile "setshow"
25 set srcfile ${testfile}.c
26 set binfile ${objdir}/${subdir}/${testfile}
27 if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable {debug}] != "" } {
32 # Start with a fresh gdb
36 gdb_reinitialize_dir $srcdir/$subdir
39 # make sure $pc is sane, in case we're talking to a board.
40 if { ![runto_main] } {
45 # Test gdb set and show commands.
46 # Add tests here for show and set that don't fit neatly elsewhere.
47 # FIXME: many rudimentary tests for set and show commands have been
48 # added below, but most do nothing more than check that a
49 # variable has been set successfully, ie. they do not test
50 # whether setting the variable has had the desired effect.
53 #test default annotation_level is 0
54 gdb_test "show annotate" "Annotation_level is 0..*" "default annotation_level is zero"
58 gdb_test_multiple "set annotate 2" "set annotate 2" {
59 -re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" {
64 gdb_test_multiple "show annotate" "show annotate 2" {
65 -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" {
66 pass "show annotate 2"
70 #test annotation_level 2
71 gdb_test_multiple "info line 1" "annotation_level 2" {
72 -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" {
73 pass "annotation_level 2"
78 gdb_test "set annotate 1" ".*post-prompt.*" "set annotate 1"
79 gdb_test "show annotate" "Annotation_level is 1..*" "show annotate (1)"
80 #test annotation_level 1
81 gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*" "annotation_level 1"
83 gdb_test_no_output "set annotate 0" "set annotate 0"
84 gdb_test "show annotate" "Annotation_level is 0..*" "show annotate (0)"
85 #test annotation_level 0
86 gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*" "annotation_level 0"
88 gdb_test_no_output "set args foo bar blup baz bubble" "set args"
90 gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args"
92 # Don't test if we can't pass args or if we're using a stub.
93 if { ![target_info exists use_gdb_stub] && ![target_info exists noargs] } {
95 gdb_test "cont" "Continuing.*" "continuing"
97 gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args"
99 #test set check range on
100 gdb_test "set check range on" ".*" "set check range on"
101 #test show check range on
102 gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)"
103 #test set check range off with trailing space
104 gdb_test_no_output "set check range off " "set check range off"
105 #test show check range off
106 gdb_test "show check range" "Range checking is \"off\"\..*" "show check range (off)"
107 #test set check range auto
108 gdb_test_no_output "set check range auto" "set check range auto"
109 #test show check range auto
110 gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)"
111 #test set check type on
112 gdb_test "set check type on" ".*" "set check type on"
113 #test show check type on
114 gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)"
115 #test set check type off with trailing space
116 gdb_test_no_output "set check type off " "set check type off"
117 #test show check type off
118 gdb_test "show check type" "Type checking is \"off\"..*" "show check type (off)"
119 #test set check type auto
120 gdb_test_no_output "set check type auto" "set check type auto"
121 #test show check type
122 gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)"
123 #test set complaints 100
124 gdb_test_no_output "set complaints 100" "set complaints 100"
125 #test show complaints 100
126 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)"
127 #test set complaints 0
128 gdb_test_no_output "set complaints 0" "set complaints 0"
129 #test show complaints 0
130 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)"
131 #test set confirm off
132 gdb_test_no_output "set confirm off" "set confirm off"
133 #test show confirm off
134 gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)"
136 gdb_test_no_output "set confirm on" "set confirm on"
137 #test show confirm on
138 gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)"
139 #test set editing off
140 gdb_test_no_output "set editing off" "set editing off"
141 #test show editing off
142 gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)"
144 #gdb_test_no_output "set editing on" "set editing on"
145 #test show editing on
146 #gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)"
147 #test set environment FOOBARBAZ
148 gdb_test_no_output "set environment FOOBARBAZ = grbxgrbxgrbx" \
149 "set environment FOOBARBAZ"
150 #test show environment FOOBARBAZ
151 gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*" "show environment FOOBARBAZ"
153 gdb_test_no_output "set height 100" "set height 100"
154 #test show height 100
155 gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height"
156 # back to infinite height to avoid pagers
157 gdb_test_no_output "set height 0" ""
158 #test set history expansion on
159 gdb_test_no_output "set history expansion on" "set history expansion on"
160 #test show history expansion on
161 gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion"
162 #test set history filename foobar.baz
163 gdb_test_no_output "set history filename foobar.baz" \
164 "set history filename foobar.baz"
165 #test show history filename foobar.baz
166 gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*" "show history filename (foobar.baz)"
167 #test set history save on
168 gdb_test_no_output "set history save on" "set history save on"
169 #test show history save on
170 gdb_test "show history save" "Saving of the history record on exit is on..*" "show history save (on)"
171 #test set history size 100
172 gdb_test_no_output "set history size 100" "set history size 100"
173 #test show history size 100
174 gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)"
175 #test set language asm
176 gdb_test "set language asm" ".*" "set language asm"
177 #test show language asm
178 gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)"
179 #test set language java, with a trailing space
180 gdb_test_no_output "set language java " "set language java"
181 #test show language java
182 gdb_test "show language" "The current source language is \"java\"..*" "show language (java)"
183 #test completion for set language.
184 gdb_test "complete set language min" "set language minimal" \
185 "complete set language minimal"
186 #test set language auto
187 gdb_test_no_output "set language auto" "set language auto"
189 gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)"
190 #test set listsize 100
191 gdb_test_no_output "set listsize 100" "set listsize 100"
192 #test show listsize 100
193 gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)"
195 if ![board_info target exists gdb_prompt] {
196 #test set prompt (FooBarBaz)
197 set newprompt "\\(FooBarBaz\\)"
199 gdb_test_multiple "set prompt (FooBarBaz) " "set prompt FooBarBaz" {
201 pass "set prompt FooBarBaz"
205 #test show prompt (FooBarBaz)
207 gdb_test_multiple "show prompt" "show prompt FooBarBaz" {
208 -re "Gdb's prompt is \"$newprompt \"..* $" {
209 pass "show prompt FooBarBaz"
213 #test set prompt (gdb)
215 gdb_test_multiple "set prompt (gdb) " "set prompt gdb" {
216 -re "$gdb_prompt $" {
217 pass "set prompt gdb"
223 gdb_test "set radix 11" "Unsupported output radix ``decimal 11''; output radix unchanged..*" "set radix 11"
225 gdb_test "set radix 16" "Input and output radices now set to decimal 16, hex 10, octal 20..*" "set radix 16"
227 gdb_test "show radix" "Input and output radices set to decimal 16, hex 10, octal 20..*" "show radix (16)"
229 gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12..*" "set radix 10"
231 gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)"
233 gdb_test_no_output "set width 90" "set width 90"
235 gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)"
237 # This is only supported on targets which use exec.o.
238 gdb_test_no_output "set write on" "set write on"
240 # This is only supported on targets which use exec.o.
241 gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)"
242 #test set symbol-reloading on
243 gdb_test_no_output "set symbol-reloading on" "set symbol-reloading on"
244 #test show symbol-reloading on
245 gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)"
247 gdb_test_no_output "show user" "show user"
249 gdb_test_no_output "set verbose on" "set verbose on"
250 #test show verbose on
251 gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)"
252 #test set verbose off
253 gdb_test_no_output "set verbose off" "set verbose off"
254 #test show verbose off
255 gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)"