1 /* Multi-process/thread control for GDB, the GNU debugger.
3 Copyright (C) 1986, 1987, 1988, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
4 2000, 2001, 2002, 2003, 2004, 2007, 2008, 2009
5 Free Software Foundation, Inc.
7 Contributed by Lynx Real-Time Systems, Inc. Los Gatos, CA.
9 This file is part of GDB.
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 3 of the License, or
14 (at your option) any later version.
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
21 You should have received a copy of the GNU General Public License
22 along with this program. If not, see <http://www.gnu.org/licenses/>. */
31 #include "gdbthread.h"
32 #include "exceptions.h"
37 #include "gdb_string.h"
40 #include <sys/types.h>
45 #include "cli/cli-decode.h"
47 /* Definition of struct thread_info exported to gdbthread.h */
49 /* Prototypes for exported functions. */
51 void _initialize_thread (void);
53 /* Prototypes for local functions. */
55 static struct thread_info
*thread_list
= NULL
;
56 static int highest_thread_num
;
58 static void thread_command (char *tidstr
, int from_tty
);
59 static void thread_apply_all_command (char *, int);
60 static int thread_alive (struct thread_info
*);
61 static void info_threads_command (char *, int);
62 static void thread_apply_command (char *, int);
63 static void restore_current_thread (ptid_t
);
64 static void prune_threads (void);
66 /* Frontend view of the thread state. Possible extensions: stepping,
67 finishing, until(ling),... */
76 inferior_thread (void)
78 struct thread_info
*tp
= find_thread_ptid (inferior_ptid
);
84 delete_step_resume_breakpoint (struct thread_info
*tp
)
86 if (tp
&& tp
->step_resume_breakpoint
)
88 delete_breakpoint (tp
->step_resume_breakpoint
);
89 tp
->step_resume_breakpoint
= NULL
;
94 clear_thread_inferior_resources (struct thread_info
*tp
)
96 /* NOTE: this will take care of any left-over step_resume breakpoints,
97 but not any user-specified thread-specific breakpoints. We can not
98 delete the breakpoint straight-off, because the inferior might not
99 be stopped at the moment. */
100 if (tp
->step_resume_breakpoint
)
102 tp
->step_resume_breakpoint
->disposition
= disp_del_at_next_stop
;
103 tp
->step_resume_breakpoint
= NULL
;
106 bpstat_clear (&tp
->stop_bpstat
);
108 discard_all_intermediate_continuations_thread (tp
);
109 discard_all_continuations_thread (tp
);
113 free_thread (struct thread_info
*tp
)
115 clear_thread_inferior_resources (tp
);
117 /* FIXME: do I ever need to call the back-end to give it a
118 chance at this private data before deleting the thread? */
126 init_thread_list (void)
128 struct thread_info
*tp
, *tpnext
;
130 highest_thread_num
= 0;
135 for (tp
= thread_list
; tp
; tp
= tpnext
)
144 /* Allocate a new thread with target id PTID and add it to the thread
147 static struct thread_info
*
148 new_thread (ptid_t ptid
)
150 struct thread_info
*tp
;
152 tp
= xcalloc (1, sizeof (*tp
));
155 tp
->num
= ++highest_thread_num
;
156 tp
->next
= thread_list
;
159 /* Nothing to follow yet. */
160 tp
->pending_follow
.kind
= TARGET_WAITKIND_SPURIOUS
;
161 tp
->state_
= THREAD_STOPPED
;
167 add_thread_silent (ptid_t ptid
)
169 struct thread_info
*tp
;
171 tp
= find_thread_ptid (ptid
);
173 /* Found an old thread with the same id. It has to be dead,
174 otherwise we wouldn't be adding a new thread with the same id.
175 The OS is reusing this id --- delete it, and recreate a new
178 /* In addition to deleting the thread, if this is the current
179 thread, then we need to take care that delete_thread doesn't
180 really delete the thread if it is inferior_ptid. Create a
181 new template thread in the list with an invalid ptid, switch
182 to it, delete the original thread, reset the new thread's
183 ptid, and switch to it. */
185 if (ptid_equal (inferior_ptid
, ptid
))
187 tp
= new_thread (ptid
);
189 /* Make switch_to_thread not read from the thread. */
190 tp
->state_
= THREAD_EXITED
;
191 switch_to_thread (minus_one_ptid
);
193 /* Now we can delete it. */
194 delete_thread (ptid
);
196 /* Now reset its ptid, and reswitch inferior_ptid to it. */
198 tp
->state_
= THREAD_STOPPED
;
199 switch_to_thread (ptid
);
201 observer_notify_new_thread (tp
);
207 /* Just go ahead and delete it. */
208 delete_thread (ptid
);
211 tp
= new_thread (ptid
);
212 observer_notify_new_thread (tp
);
218 add_thread_with_info (ptid_t ptid
, struct private_thread_info
*private)
220 struct thread_info
*result
= add_thread_silent (ptid
);
222 result
->private = private;
224 if (print_thread_events
)
225 printf_unfiltered (_("[New %s]\n"), target_pid_to_str (ptid
));
227 annotate_new_thread ();
232 add_thread (ptid_t ptid
)
234 return add_thread_with_info (ptid
, NULL
);
237 /* Delete thread PTID. If SILENT, don't notify the observer of this
240 delete_thread_1 (ptid_t ptid
, int silent
)
242 struct thread_info
*tp
, *tpprev
;
246 for (tp
= thread_list
; tp
; tpprev
= tp
, tp
= tp
->next
)
247 if (ptid_equal (tp
->ptid
, ptid
))
253 /* If this is the current thread, or there's code out there that
254 relies on it existing (refcount > 0) we can't delete yet. Mark
255 it as exited, and notify it. */
257 || ptid_equal (tp
->ptid
, inferior_ptid
))
259 if (tp
->state_
!= THREAD_EXITED
)
261 observer_notify_thread_exit (tp
, silent
);
263 /* Tag it as exited. */
264 tp
->state_
= THREAD_EXITED
;
266 /* Clear breakpoints, etc. associated with this thread. */
267 clear_thread_inferior_resources (tp
);
270 /* Will be really deleted some other time. */
275 tpprev
->next
= tp
->next
;
277 thread_list
= tp
->next
;
279 /* Notify thread exit, but only if we haven't already. */
280 if (tp
->state_
!= THREAD_EXITED
)
281 observer_notify_thread_exit (tp
, silent
);
286 /* Delete thread PTID and notify of thread exit. If this is
287 inferior_ptid, don't actually delete it, but tag it as exited and
288 do the notification. If PTID is the user selected thread, clear
291 delete_thread (ptid_t ptid
)
293 delete_thread_1 (ptid
, 0 /* not silent */);
297 delete_thread_silent (ptid_t ptid
)
299 delete_thread_1 (ptid
, 1 /* silent */);
303 find_thread_id (int num
)
305 struct thread_info
*tp
;
307 for (tp
= thread_list
; tp
; tp
= tp
->next
)
314 /* Find a thread_info by matching PTID. */
316 find_thread_ptid (ptid_t ptid
)
318 struct thread_info
*tp
;
320 for (tp
= thread_list
; tp
; tp
= tp
->next
)
321 if (ptid_equal (tp
->ptid
, ptid
))
328 * Thread iterator function.
330 * Calls a callback function once for each thread, so long as
331 * the callback function returns false. If the callback function
332 * returns true, the iteration will end and the current thread
333 * will be returned. This can be useful for implementing a
334 * search for a thread with arbitrary attributes, or for applying
335 * some operation to every thread.
337 * FIXME: some of the existing functionality, such as
338 * "Thread apply all", might be rewritten using this functionality.
342 iterate_over_threads (int (*callback
) (struct thread_info
*, void *),
345 struct thread_info
*tp
, *next
;
347 for (tp
= thread_list
; tp
; tp
= next
)
350 if ((*callback
) (tp
, data
))
361 struct thread_info
*tp
;
363 for (tp
= thread_list
; tp
; tp
= tp
->next
)
370 valid_thread_id (int num
)
372 struct thread_info
*tp
;
374 for (tp
= thread_list
; tp
; tp
= tp
->next
)
382 pid_to_thread_id (ptid_t ptid
)
384 struct thread_info
*tp
;
386 for (tp
= thread_list
; tp
; tp
= tp
->next
)
387 if (ptid_equal (tp
->ptid
, ptid
))
394 thread_id_to_pid (int num
)
396 struct thread_info
*thread
= find_thread_id (num
);
400 return pid_to_ptid (-1);
404 in_thread_list (ptid_t ptid
)
406 struct thread_info
*tp
;
408 for (tp
= thread_list
; tp
; tp
= tp
->next
)
409 if (ptid_equal (tp
->ptid
, ptid
))
412 return 0; /* Never heard of 'im */
415 /* Finds the first thread of the inferior given by PID. If PID is -1,
416 return the first thread in the list. */
419 first_thread_of_process (int pid
)
421 struct thread_info
*tp
, *ret
= NULL
;
423 for (tp
= thread_list
; tp
; tp
= tp
->next
)
424 if (pid
== -1 || ptid_get_pid (tp
->ptid
) == pid
)
425 if (ret
== NULL
|| tp
->num
< ret
->num
)
432 any_thread_of_process (int pid
)
434 struct thread_info
*tp
;
436 for (tp
= thread_list
; tp
; tp
= tp
->next
)
437 if (ptid_get_pid (tp
->ptid
) == pid
)
443 /* Print a list of thread ids currently known, and the total number of
444 threads. To be used from within catch_errors. */
446 do_captured_list_thread_ids (struct ui_out
*uiout
, void *arg
)
448 struct thread_info
*tp
;
450 struct cleanup
*cleanup_chain
;
451 int current_thread
= -1;
454 target_find_new_threads ();
456 cleanup_chain
= make_cleanup_ui_out_tuple_begin_end (uiout
, "thread-ids");
458 for (tp
= thread_list
; tp
; tp
= tp
->next
)
460 if (tp
->state_
== THREAD_EXITED
)
463 if (ptid_equal (tp
->ptid
, inferior_ptid
))
464 current_thread
= tp
->num
;
467 ui_out_field_int (uiout
, "thread-id", tp
->num
);
470 do_cleanups (cleanup_chain
);
472 if (current_thread
!= -1)
473 ui_out_field_int (uiout
, "current-thread-id", current_thread
);
474 ui_out_field_int (uiout
, "number-of-threads", num
);
478 /* Official gdblib interface function to get a list of thread ids and
481 gdb_list_thread_ids (struct ui_out
*uiout
, char **error_message
)
483 if (catch_exceptions_with_msg (uiout
, do_captured_list_thread_ids
, NULL
,
484 error_message
, RETURN_MASK_ALL
) < 0)
489 /* Return true if TP is an active thread. */
491 thread_alive (struct thread_info
*tp
)
493 if (tp
->state_
== THREAD_EXITED
)
495 if (!target_thread_alive (tp
->ptid
))
503 struct thread_info
*tp
, *next
;
505 for (tp
= thread_list
; tp
; tp
= next
)
508 if (!thread_alive (tp
))
509 delete_thread (tp
->ptid
);
514 thread_change_ptid (ptid_t old_ptid
, ptid_t new_ptid
)
516 struct inferior
*inf
;
517 struct thread_info
*tp
;
519 /* It can happen that what we knew as the target inferior id
520 changes. E.g, target remote may only discover the remote process
521 pid after adding the inferior to GDB's list. */
522 inf
= find_inferior_pid (ptid_get_pid (old_ptid
));
523 inf
->pid
= ptid_get_pid (new_ptid
);
525 tp
= find_thread_ptid (old_ptid
);
528 observer_notify_thread_ptid_changed (old_ptid
, new_ptid
);
532 set_running (ptid_t ptid
, int running
)
534 struct thread_info
*tp
;
535 int all
= ptid_equal (ptid
, minus_one_ptid
);
537 /* We try not to notify the observer if no thread has actually changed
538 the running state -- merely to reduce the number of messages to
539 frontend. Frontend is supposed to handle multiple *running just fine. */
540 if (all
|| ptid_is_pid (ptid
))
543 for (tp
= thread_list
; tp
; tp
= tp
->next
)
544 if (all
|| ptid_get_pid (tp
->ptid
) == ptid_get_pid (ptid
))
546 if (tp
->state_
== THREAD_EXITED
)
548 if (running
&& tp
->state_
== THREAD_STOPPED
)
550 tp
->state_
= running
? THREAD_RUNNING
: THREAD_STOPPED
;
553 observer_notify_target_resumed (ptid
);
558 tp
= find_thread_ptid (ptid
);
560 gdb_assert (tp
->state_
!= THREAD_EXITED
);
561 if (running
&& tp
->state_
== THREAD_STOPPED
)
563 tp
->state_
= running
? THREAD_RUNNING
: THREAD_STOPPED
;
565 observer_notify_target_resumed (ptid
);
570 is_thread_state (ptid_t ptid
, enum thread_state state
)
572 struct thread_info
*tp
;
574 tp
= find_thread_ptid (ptid
);
576 return tp
->state_
== state
;
580 is_stopped (ptid_t ptid
)
582 return is_thread_state (ptid
, THREAD_STOPPED
);
586 is_exited (ptid_t ptid
)
588 return is_thread_state (ptid
, THREAD_EXITED
);
592 is_running (ptid_t ptid
)
594 return is_thread_state (ptid
, THREAD_RUNNING
);
600 struct thread_info
*tp
;
602 for (tp
= thread_list
; tp
; tp
= tp
->next
)
603 if (tp
->state_
== THREAD_RUNNING
)
610 is_executing (ptid_t ptid
)
612 struct thread_info
*tp
;
614 tp
= find_thread_ptid (ptid
);
616 return tp
->executing_
;
620 set_executing (ptid_t ptid
, int executing
)
622 struct thread_info
*tp
;
623 int all
= ptid_equal (ptid
, minus_one_ptid
);
625 if (all
|| ptid_is_pid (ptid
))
627 for (tp
= thread_list
; tp
; tp
= tp
->next
)
628 if (all
|| ptid_get_pid (tp
->ptid
) == ptid_get_pid (ptid
))
629 tp
->executing_
= executing
;
633 tp
= find_thread_ptid (ptid
);
635 tp
->executing_
= executing
;
640 set_stop_requested (ptid_t ptid
, int stop
)
642 struct thread_info
*tp
;
643 int all
= ptid_equal (ptid
, minus_one_ptid
);
645 if (all
|| ptid_is_pid (ptid
))
647 for (tp
= thread_list
; tp
; tp
= tp
->next
)
648 if (all
|| ptid_get_pid (tp
->ptid
) == ptid_get_pid (ptid
))
649 tp
->stop_requested
= stop
;
653 tp
= find_thread_ptid (ptid
);
655 tp
->stop_requested
= stop
;
658 /* Call the stop requested observer so other components of GDB can
659 react to this request. */
661 observer_notify_thread_stop_requested (ptid
);
665 finish_thread_state (ptid_t ptid
)
667 struct thread_info
*tp
;
671 all
= ptid_equal (ptid
, minus_one_ptid
);
673 if (all
|| ptid_is_pid (ptid
))
675 for (tp
= thread_list
; tp
; tp
= tp
->next
)
677 if (tp
->state_
== THREAD_EXITED
)
679 if (all
|| ptid_get_pid (ptid
) == ptid_get_pid (tp
->ptid
))
681 if (tp
->executing_
&& tp
->state_
== THREAD_STOPPED
)
683 tp
->state_
= tp
->executing_
? THREAD_RUNNING
: THREAD_STOPPED
;
689 tp
= find_thread_ptid (ptid
);
691 if (tp
->state_
!= THREAD_EXITED
)
693 if (tp
->executing_
&& tp
->state_
== THREAD_STOPPED
)
695 tp
->state_
= tp
->executing_
? THREAD_RUNNING
: THREAD_STOPPED
;
700 observer_notify_target_resumed (ptid
);
704 finish_thread_state_cleanup (void *arg
)
706 ptid_t
*ptid_p
= arg
;
710 finish_thread_state (*ptid_p
);
713 /* Prints the list of threads and their details on UIOUT.
714 This is a version of 'info_thread_command' suitable for
716 If REQUESTED_THREAD is not -1, it's the GDB id of the thread
717 that should be printed. Otherwise, all threads are
719 If PID is not -1, only print threads from the process PID.
720 Otherwise, threads from all attached PIDs are printed.
721 If both REQUESTED_THREAD and PID are not -1, then the thread
722 is printed if it belongs to the specified process. Otherwise,
723 an error is raised. */
725 print_thread_info (struct ui_out
*uiout
, int requested_thread
, int pid
)
727 struct thread_info
*tp
;
729 struct cleanup
*old_chain
;
731 int current_thread
= -1;
734 target_find_new_threads ();
735 current_ptid
= inferior_ptid
;
737 /* We'll be switching threads temporarily. */
738 old_chain
= make_cleanup_restore_current_thread ();
740 make_cleanup_ui_out_list_begin_end (uiout
, "threads");
741 for (tp
= thread_list
; tp
; tp
= tp
->next
)
743 struct cleanup
*chain2
;
745 if (requested_thread
!= -1 && tp
->num
!= requested_thread
)
748 if (pid
!= -1 && PIDGET (tp
->ptid
) != pid
)
750 if (requested_thread
!= -1)
751 error (_("Requested thread not found in requested process"));
755 if (ptid_equal (tp
->ptid
, current_ptid
))
756 current_thread
= tp
->num
;
758 if (tp
->state_
== THREAD_EXITED
)
761 chain2
= make_cleanup_ui_out_tuple_begin_end (uiout
, NULL
);
763 if (ptid_equal (tp
->ptid
, current_ptid
))
764 ui_out_text (uiout
, "* ");
766 ui_out_text (uiout
, " ");
768 ui_out_field_int (uiout
, "id", tp
->num
);
769 ui_out_text (uiout
, " ");
770 ui_out_field_string (uiout
, "target-id", target_pid_to_str (tp
->ptid
));
772 extra_info
= target_extra_thread_info (tp
);
775 ui_out_text (uiout
, " (");
776 ui_out_field_string (uiout
, "details", extra_info
);
777 ui_out_text (uiout
, ")");
779 ui_out_text (uiout
, " ");
781 if (tp
->state_
== THREAD_RUNNING
)
782 ui_out_text (uiout
, "(running)\n");
785 /* The switch below puts us at the top of the stack (leaf
787 switch_to_thread (tp
->ptid
);
788 print_stack_frame (get_selected_frame (NULL
),
789 /* For MI output, print frame level. */
790 ui_out_is_mi_like_p (uiout
),
794 if (ui_out_is_mi_like_p (uiout
))
796 char *state
= "stopped";
797 if (tp
->state_
== THREAD_RUNNING
)
799 ui_out_field_string (uiout
, "state", state
);
802 do_cleanups (chain2
);
805 /* Restores the current thread and the frame selected before
806 the "info threads" command. */
807 do_cleanups (old_chain
);
809 if (pid
== -1 && requested_thread
== -1)
811 gdb_assert (current_thread
!= -1
813 || ptid_equal (inferior_ptid
, null_ptid
));
814 if (current_thread
!= -1 && ui_out_is_mi_like_p (uiout
))
815 ui_out_field_int (uiout
, "current-thread-id", current_thread
);
817 if (current_thread
!= -1 && is_exited (current_ptid
))
818 ui_out_message (uiout
, 0, "\n\
819 The current thread <Thread ID %d> has terminated. See `help thread'.\n",
822 && current_thread
== -1
823 && ptid_equal (current_ptid
, null_ptid
))
824 ui_out_message (uiout
, 0, "\n\
825 No selected thread. See `help thread'.\n");
830 /* Print information about currently known threads
832 * Note: this has the drawback that it _really_ switches
833 * threads, which frees the frame cache. A no-side
834 * effects info-threads command would be nicer.
838 info_threads_command (char *arg
, int from_tty
)
840 print_thread_info (uiout
, -1, -1);
843 /* Switch from one thread to another. */
846 switch_to_thread (ptid_t ptid
)
848 if (ptid_equal (ptid
, inferior_ptid
))
851 inferior_ptid
= ptid
;
852 reinit_frame_cache ();
853 registers_changed ();
855 /* We don't check for is_stopped, because we're called at times
856 while in the TARGET_RUNNING state, e.g., while handling an
858 if (!ptid_equal (inferior_ptid
, null_ptid
)
860 && !is_executing (ptid
))
861 stop_pc
= regcache_read_pc (get_thread_regcache (ptid
));
863 stop_pc
= ~(CORE_ADDR
) 0;
867 restore_current_thread (ptid_t ptid
)
869 switch_to_thread (ptid
);
873 restore_selected_frame (struct frame_id a_frame_id
, int frame_level
)
875 struct frame_info
*frame
= NULL
;
878 gdb_assert (frame_level
>= 0);
880 /* Restore by level first, check if the frame id is the same as
881 expected. If that fails, try restoring by frame id. If that
882 fails, nothing to do, just warn the user. */
885 frame
= find_relative_frame (get_current_frame (), &count
);
888 /* The frame ids must match - either both valid or both outer_frame_id.
889 The latter case is not failsafe, but since it's highly unlikely
890 the search by level finds the wrong frame, it's 99.9(9)% of
891 the time (for all practical purposes) safe. */
892 && frame_id_eq (get_frame_id (frame
), a_frame_id
))
894 /* Cool, all is fine. */
895 select_frame (frame
);
899 frame
= frame_find_by_id (a_frame_id
);
902 /* Cool, refound it. */
903 select_frame (frame
);
907 /* Nothing else to do, the frame layout really changed. Select the
908 innermost stack frame. */
909 select_frame (get_current_frame ());
912 if (!ui_out_is_mi_like_p (uiout
))
915 Couldn't restore frame #%d in current thread, at reparsed frame #0\n"),
917 /* For MI, we should probably have a notification about
918 current frame change. But this error is not very
919 likely, so don't bother for now. */
920 print_stack_frame (get_selected_frame (NULL
), 1, SRC_LINE
);
924 struct current_thread_cleanup
926 ptid_t inferior_ptid
;
927 struct frame_id selected_frame_id
;
928 int selected_frame_level
;
933 do_restore_current_thread_cleanup (void *arg
)
935 struct thread_info
*tp
;
936 struct current_thread_cleanup
*old
= arg
;
938 tp
= find_thread_ptid (old
->inferior_ptid
);
940 /* If the previously selected thread belonged to a process that has
941 in the mean time been deleted (due to normal exit, detach, etc.),
942 then don't revert back to it, but instead simply drop back to no
945 && find_inferior_pid (ptid_get_pid (tp
->ptid
)) != NULL
)
946 restore_current_thread (old
->inferior_ptid
);
948 restore_current_thread (null_ptid
);
950 /* The running state of the originally selected thread may have
951 changed, so we have to recheck it here. */
952 if (!ptid_equal (inferior_ptid
, null_ptid
)
954 && is_stopped (inferior_ptid
)
955 && target_has_registers
957 && target_has_memory
)
958 restore_selected_frame (old
->selected_frame_id
,
959 old
->selected_frame_level
);
963 restore_current_thread_cleanup_dtor (void *arg
)
965 struct current_thread_cleanup
*old
= arg
;
966 struct thread_info
*tp
;
967 tp
= find_thread_ptid (old
->inferior_ptid
);
974 make_cleanup_restore_current_thread (void)
976 struct thread_info
*tp
;
977 struct frame_info
*frame
;
978 struct current_thread_cleanup
*old
;
980 old
= xmalloc (sizeof (struct current_thread_cleanup
));
981 old
->inferior_ptid
= inferior_ptid
;
983 if (!ptid_equal (inferior_ptid
, null_ptid
))
985 old
->was_stopped
= is_stopped (inferior_ptid
);
987 && target_has_registers
989 && target_has_memory
)
990 frame
= get_selected_frame (NULL
);
994 old
->selected_frame_id
= get_frame_id (frame
);
995 old
->selected_frame_level
= frame_relative_level (frame
);
997 tp
= find_thread_ptid (inferior_ptid
);
1002 return make_cleanup_dtor (do_restore_current_thread_cleanup
, old
,
1003 restore_current_thread_cleanup_dtor
);
1006 /* Apply a GDB command to a list of threads. List syntax is a whitespace
1007 seperated list of numbers, or ranges, or the keyword `all'. Ranges consist
1008 of two numbers seperated by a hyphen. Examples:
1010 thread apply 1 2 7 4 backtrace Apply backtrace cmd to threads 1,2,7,4
1011 thread apply 2-7 9 p foo(1) Apply p foo(1) cmd to threads 2->7 & 9
1012 thread apply all p x/i $pc Apply x/i $pc cmd to all threads
1016 thread_apply_all_command (char *cmd
, int from_tty
)
1018 struct thread_info
*tp
;
1019 struct cleanup
*old_chain
;
1022 if (cmd
== NULL
|| *cmd
== '\000')
1023 error (_("Please specify a command following the thread ID list"));
1026 target_find_new_threads ();
1028 old_chain
= make_cleanup_restore_current_thread ();
1030 /* Save a copy of the command in case it is clobbered by
1032 saved_cmd
= xstrdup (cmd
);
1033 make_cleanup (xfree
, saved_cmd
);
1034 for (tp
= thread_list
; tp
; tp
= tp
->next
)
1035 if (thread_alive (tp
))
1037 switch_to_thread (tp
->ptid
);
1039 printf_filtered (_("\nThread %d (%s):\n"),
1040 tp
->num
, target_pid_to_str (inferior_ptid
));
1041 execute_command (cmd
, from_tty
);
1042 strcpy (cmd
, saved_cmd
); /* Restore exact command used previously */
1045 do_cleanups (old_chain
);
1049 thread_apply_command (char *tidlist
, int from_tty
)
1053 struct cleanup
*old_chain
;
1056 if (tidlist
== NULL
|| *tidlist
== '\000')
1057 error (_("Please specify a thread ID list"));
1059 for (cmd
= tidlist
; *cmd
!= '\000' && !isalpha (*cmd
); cmd
++);
1062 error (_("Please specify a command following the thread ID list"));
1064 /* Save a copy of the command in case it is clobbered by
1066 saved_cmd
= xstrdup (cmd
);
1067 old_chain
= make_cleanup (xfree
, saved_cmd
);
1068 while (tidlist
< cmd
)
1070 struct thread_info
*tp
;
1073 start
= strtol (tidlist
, &p
, 10);
1075 error (_("Error parsing %s"), tidlist
);
1078 while (*tidlist
== ' ' || *tidlist
== '\t')
1081 if (*tidlist
== '-') /* Got a range of IDs? */
1083 tidlist
++; /* Skip the - */
1084 end
= strtol (tidlist
, &p
, 10);
1086 error (_("Error parsing %s"), tidlist
);
1089 while (*tidlist
== ' ' || *tidlist
== '\t')
1095 make_cleanup_restore_current_thread ();
1097 for (; start
<= end
; start
++)
1099 tp
= find_thread_id (start
);
1102 warning (_("Unknown thread %d."), start
);
1103 else if (!thread_alive (tp
))
1104 warning (_("Thread %d has terminated."), start
);
1107 switch_to_thread (tp
->ptid
);
1109 printf_filtered (_("\nThread %d (%s):\n"), tp
->num
,
1110 target_pid_to_str (inferior_ptid
));
1111 execute_command (cmd
, from_tty
);
1113 /* Restore exact command used previously. */
1114 strcpy (cmd
, saved_cmd
);
1119 do_cleanups (old_chain
);
1122 /* Switch to the specified thread. Will dispatch off to thread_apply_command
1123 if prefix of arg is `apply'. */
1126 thread_command (char *tidstr
, int from_tty
)
1130 if (ptid_equal (inferior_ptid
, null_ptid
))
1131 error (_("No thread selected"));
1133 if (target_has_stack
)
1135 if (is_exited (inferior_ptid
))
1136 printf_filtered (_("[Current thread is %d (%s) (exited)]\n"),
1137 pid_to_thread_id (inferior_ptid
),
1138 target_pid_to_str (inferior_ptid
));
1140 printf_filtered (_("[Current thread is %d (%s)]\n"),
1141 pid_to_thread_id (inferior_ptid
),
1142 target_pid_to_str (inferior_ptid
));
1145 error (_("No stack."));
1149 gdb_thread_select (uiout
, tidstr
, NULL
);
1152 /* Print notices when new threads are attached and detached. */
1153 int print_thread_events
= 1;
1155 show_print_thread_events (struct ui_file
*file
, int from_tty
,
1156 struct cmd_list_element
*c
, const char *value
)
1158 fprintf_filtered (file
, _("\
1159 Printing of thread events is %s.\n"),
1164 do_captured_thread_select (struct ui_out
*uiout
, void *tidstr
)
1167 struct thread_info
*tp
;
1169 num
= value_as_long (parse_and_eval (tidstr
));
1171 tp
= find_thread_id (num
);
1174 error (_("Thread ID %d not known."), num
);
1176 if (!thread_alive (tp
))
1177 error (_("Thread ID %d has terminated."), num
);
1179 switch_to_thread (tp
->ptid
);
1181 annotate_thread_changed ();
1183 ui_out_text (uiout
, "[Switching to thread ");
1184 ui_out_field_int (uiout
, "new-thread-id", pid_to_thread_id (inferior_ptid
));
1185 ui_out_text (uiout
, " (");
1186 ui_out_text (uiout
, target_pid_to_str (inferior_ptid
));
1187 ui_out_text (uiout
, ")]");
1189 /* Note that we can't reach this with an exited thread, due to the
1190 thread_alive check above. */
1191 if (tp
->state_
== THREAD_RUNNING
)
1192 ui_out_text (uiout
, "(running)\n");
1194 print_stack_frame (get_selected_frame (NULL
), 1, SRC_AND_LOC
);
1196 /* Since the current thread may have changed, see if there is any
1197 exited thread we can now delete. */
1204 gdb_thread_select (struct ui_out
*uiout
, char *tidstr
, char **error_message
)
1206 if (catch_exceptions_with_msg (uiout
, do_captured_thread_select
, tidstr
,
1207 error_message
, RETURN_MASK_ALL
) < 0)
1212 /* Commands with a prefix of `thread'. */
1213 struct cmd_list_element
*thread_cmd_list
= NULL
;
1216 _initialize_thread (void)
1218 static struct cmd_list_element
*thread_apply_list
= NULL
;
1220 add_info ("threads", info_threads_command
,
1221 _("IDs of currently known threads."));
1223 add_prefix_cmd ("thread", class_run
, thread_command
, _("\
1224 Use this command to switch between threads.\n\
1225 The new thread ID must be currently known."),
1226 &thread_cmd_list
, "thread ", 1, &cmdlist
);
1228 add_prefix_cmd ("apply", class_run
, thread_apply_command
,
1229 _("Apply a command to a list of threads."),
1230 &thread_apply_list
, "thread apply ", 1, &thread_cmd_list
);
1232 add_cmd ("all", class_run
, thread_apply_all_command
,
1233 _("Apply a command to all threads."), &thread_apply_list
);
1236 add_com_alias ("t", "thread", class_run
, 1);
1238 add_setshow_boolean_cmd ("thread-events", no_class
,
1239 &print_thread_events
, _("\
1240 Set printing of thread events (such as thread start and exit)."), _("\
1241 Show printing of thread events (such as thread start and exit)."), NULL
,
1243 show_print_thread_events
,
1244 &setprintlist
, &showprintlist
);