1 /* Parameters for execution on a H8/300 series machine.
2 Copyright (C) 1992 Free Software Foundation, Inc.
4 This file is part of GDB.
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
20 /* Contributed by Steve Chamberlain sac@cygnus.com */
24 /* Define the bit, byte, and word ordering of the machine. */
25 #define TARGET_BYTE_ORDER BIG_ENDIAN
27 #define TARGET_INT_BIT 16
30 /* Offset from address of function to start of its code.
31 Zero on most machines. */
33 #define FUNCTION_START_OFFSET 0
35 /* Advance PC across any function entry prologue instructions
36 to reach some "real" code. */
39 #define SKIP_PROLOGUE(ip) {(ip) = h8300_skip_prologue(ip);}
40 extern CORE_ADDR
h8300_skip_prologue ();
43 /* Immediately after a function call, return the saved pc.
44 Can't always go through the frames for this because on some machines
45 the new frame is not set up until the new function executes
48 #define SAVED_PC_AFTER_CALL(frame) \
49 read_memory_integer (read_register (SP_REGNUM), 2)
51 /* Stack grows downward. */
55 /* Sequence of bytes for breakpoint instruction.
56 This is a TRAP instruction. The last 4 bits (0xf below) is the
57 vector. Systems which don't use 0xf should define BPT_VECTOR
58 themselves before including this file. */
61 #define BPT_VECTOR 0xf
65 #define BREAKPOINT {0x4e, (0x40 | BPT_VECTOR)}
68 /* If your kernel resets the pc after the trap happens you may need to
69 define this before including this file. */
72 #define DECR_PC_AFTER_BREAK 2
75 /* Nonzero if instruction at PC is a return instruction. */
76 /* Allow any of the return instructions, including a trapv and a return
79 #define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 2) & ~0x3) == 0x4e74)
81 /* Return 1 if P points to an invalid floating point value. */
83 #define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */
85 /* Say how long registers are. */
87 #define REGISTER_TYPE unsigned short
90 # define REGISTER_BYTES (10*2)
93 /* Index within `registers' of the first byte of the space for
96 #define REGISTER_BYTE(N) ((N) * 2)
98 /* Number of bytes of storage in the actual machine representation
99 for register N. On the H8/300, all regs are 2 bytes. */
101 #define REGISTER_RAW_SIZE(N) 2
103 /* Number of bytes of storage in the program's representation
104 for register N. On the H8/300, all regs are 2 bytes. */
106 #define REGISTER_VIRTUAL_SIZE(N) 2
108 /* Largest value REGISTER_RAW_SIZE can have. */
110 #define MAX_REGISTER_RAW_SIZE 2
112 /* Largest value REGISTER_VIRTUAL_SIZE can have. */
114 #define MAX_REGISTER_VIRTUAL_SIZE 2
116 /* Nonzero if register N requires conversion
117 from raw format to virtual format. */
119 #define REGISTER_CONVERTIBLE(N) 1
121 /* Convert data from raw format for register REGNUM
122 to virtual format for register REGNUM. */
124 /*#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) */
126 /* Convert data from virtual format for register REGNUM
127 to raw format for register REGNUM. */
129 /*#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) */
131 /* Return the GDB type object for the "standard" data type
132 of data in register N. */
134 #define REGISTER_VIRTUAL_TYPE(N) builtin_type_unsigned_short
137 /* Initializer for an array of names of registers.
138 Entries beyond the first NUM_REGS are ignored. */
140 #define REGISTER_NAMES \
141 {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "sp","ccr","pc"}
144 /* Register numbers of various important registers.
145 Note that some of these values are "real" register numbers,
146 and correspond to the general registers of the machine,
147 and some are "phony" register numbers which are too large
148 to be actual register numbers as far as the user is concerned
149 but do serve to get the desired values when passed to read_register. */
152 #define FP_REGNUM 6 /* Contains address of executing stack frame */
153 #define SP_REGNUM 7 /* Contains address of top of stack */
154 #define CCR_REGNUM 8 /* Contains processor status */
155 #define PC_REGNUM 9 /* Contains program counter */
157 /* Store the address of the place in which to copy the structure the
158 subroutine will return. This is called from call_function. */
160 #define STORE_STRUCT_RETURN(ADDR, SP) \
161 { write_register (0, (ADDR)); abort(); }
163 /* Extract from an array REGBUF containing the (raw) register state
164 a function return value of type TYPE, and copy that, in virtual format,
165 into VALBUF. This is assuming that floating point values are returned
166 as doubles in d0/d1. */
169 #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
170 bcopy ((char *)(REGBUF) + \
171 (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)), \
172 VALBUF, TYPE_LENGTH(TYPE))
175 /* Write into appropriate registers a function return value
176 of type TYPE, given in virtual format. Assumes floats are passed
180 #define STORE_RETURN_VALUE(TYPE,VALBUF) \
181 write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
184 /* Extract from an array REGBUF containing the (raw) register state
185 the address in which a function should return its structure value,
186 as a CORE_ADDR (or an expression that can be used as one). */
188 #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
190 /* Describe the pointer in each stack frame to the previous stack frame
193 /* FRAME_CHAIN takes a frame's nominal address
194 and produces the frame's chain-pointer.
196 However, if FRAME_CHAIN_VALID returns zero,
197 it means the given frame is the outermost one and has no caller. */
199 /* In the case of the H8/300, the frame's nominal address
200 is the address of a 2-byte word containing the calling frame's address. */
205 /* Use the alternate method of avoiding running up off the end of
206 the frame chain or following frames back into the startup code.
207 See the comments in blockframe.c */
209 #define FRAME_CHAIN_VALID(chain, thisframe) \
211 && !(inside_main_scope ((thisframe)->pc)) \
212 && !(inside_entry_scope ((thisframe)->pc)))
215 /* Define other aspects of the stack frame. */
217 /* A macro that tells us whether the function invocation represented
218 by FI does not have a frame on the stack associated with it. If it
219 does not, FRAMELESS is set to 1, else 0. */
220 #define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
221 (FRAMELESS) = frameless_look_for_prologue(FI)
223 #define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 2, 2))
225 #define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
227 #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
229 /* Set VAL to the number of args passed to frame described by FI.
230 Can set VAL to -1, meaning no way to tell. */
232 /* We can't tell how many args there are
233 now that the C compiler delays popping them. */
235 #define FRAME_NUM_ARGS(val,fi) (val = -1)
238 /* Return number of bytes at start of arglist that are not really args. */
240 #define FRAME_ARGS_SKIP 4
242 /* Put here the code to store, into a struct frame_saved_regs,
243 the addresses of the saved registers of frame described by FRAME_INFO.
244 This includes special registers such as pc and fp saved in special
245 ways in the stack frame. sp is even more special:
246 the address we return for it IS the sp for the next frame. */
248 #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) abort();
251 /* Push an empty stack frame, to record the current PC, etc. */
253 #define PUSH_DUMMY_FRAME { h8300_push_dummy_frame (); }
255 /* Discard from the stack the innermost frame, restoring all registers. */
257 #define POP_FRAME { h8300_pop_frame (); }
259 #define SHORT_INT_MAX 32767
260 #define SHORT_INT_MIN -32768
262 #undef longest_to_int
263 #define longest_to_int(x) (x & 0xffff)
266 #define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
267 { bcopy ((FROM), (TO), 2); }
268 #define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
269 { bcopy ((FROM), (TO), 4); }
This page took 0.034507 seconds and 4 git commands to generate.