gdb/w89k-rom.c

   1 #include "defs.h"
   2 #include "gdbcore.h"
   3 #include "target.h"
   4 #include "monitor.h"
   5
   6 extern int baud_rate;
   7
   8 void w89k_open();
   9 void monitor_open();
  10
  11 /*
  12  * this array of registers need to match the indexes used by GDB. The
  13  * whole reason this exists is cause the various ROM monitors use
  14  * different strings than GDB does, and doesn't support all the
  15  * registers either. So, typing "info reg sp" becomes a "r30".
  16  */
  17 static char *w89k_regnames[] = {
  18   "r0",   "r1",    "r2",   "r3",   "r4",  "r5",  "r6",  "r7",  "r8",  "r9",
  19   "r10",  "r11",   "r12",  "r13",  "r14", "r15", "r16", "r17", "r18", "r19",
  20   "r20",  "r21",   "r22",  "r23",  "r24", "r25", "r26", "r27", "r28", "r29",
  21   "r30",  "r31",   "sar",  "",     "",    "",    "",
  22   "eiem", "iir",   "iva",  "ior",  "ipsw","",    "",    "",    "",    "",
  23   "",     "",      "",     "",     "",    "",    "",    "ccr", "",    "",
  24   "tr0",  "tr1",   "",     "",     "",    "",    "",
  25   "",     "",      "",     "",     "",    "",    "",    "",
  26   "",     "",      "",     "",     "",    "",    "",    "",
  27   "",     "",      "",     "",     "",    "",    "",    "",
  28   "",     "",      "",     "",     "",    "",    "",    "",
  29   "",     "",      "",     "",     "",    "",    "",    "",
  30   "",     "",      "",     "",     "",    "",    "",    "",
  31   "",     "",      "",     "",     "",    "",    "",    "",
  32   "",     "",      "",     "",     "",    "",    "",    ""
  33 };
  34
  35 /*
  36  * Define the monitor command strings. Since these are passed directly
  37  * through to a printf style function, we need can include formatting
  38  * strings. We also need a CR or LF on the end.
  39  */
  40
  41 struct target_ops w89k_ops = {
  42   "w89k",
  43   "WinBond's debug monitor for the W89k Eval board",
  44   "Debug on a WinBond W89K eval board.\n\
  45 Specify the serial device it is connected to (e.g. /dev/ttya).",
  46   w89k_open,
  47   monitor_close,
  48   0,
  49   monitor_detach,
  50   monitor_resume,
  51   monitor_wait,
  52   monitor_fetch_register,
  53   monitor_store_register,
  54   monitor_prepare_to_store,
  55   monitor_xfer_inferior_memory,
  56   monitor_files_info,
  57   monitor_insert_breakpoint,
  58   monitor_remove_breakpoint,    /* Breakpoints */
  59   0,
  60   0,
  61   0,
  62   0,
  63   0,                            /* Terminal handling */
  64   monitor_kill,
  65   monitor_load,                 /* load */
  66   0,                            /* lookup_symbol */
  67   monitor_create_inferior,
  68   monitor_mourn_inferior,
  69   0,                            /* can_run */
  70   0,                            /* notice_signals */
  71   process_stratum,
  72   0,                            /* next */
  73   1,
  74   1,
  75   1,
  76   1,
  77   1,                            /* all mem, mem, stack, regs, exec */
  78   0,
  79   0,                            /* Section pointers */
  80   OPS_MAGIC,                    /* Always the last thing */
  81 };
  82
  83 struct monitor_ops w89k_cmds = {
  84   1,                                    /* 1 for ASCII, 0 for binary */
  85   "\r",                                 /* monitor init string */
  86   "G = 100000\r",                       /* execute or usually GO command */
  87   "G\r",                                /* continue command */
  88   "T\r",                                /* single step */
  89   "BP %x\r",                            /* set a breakpoint */
  90   "BC %x\r",                            /* clear a breakpoint */
  91   "E %x %x\r",                          /* set memory to a value */
  92   "D %x\r",                             /* display memory */
  93   "",                                   /* prompt memory commands use */
  94   {                                     /* set a register */
  95     "r %s %x\r",                        /* set a register */
  96     "",                                 /* delimiter between registers */
  97     "",                                 /* the result */
  98   },
  99   {
 100     "r %s\r",                           /* get a register */
 101     "",                                 /* delimiter between registers */
 102     "",                                 /* the result */
 103   },
 104   "U\r",                                /* download command */
 105   "ROM>",                               /* monitor command prompt */
 106   "",                                   /* end-of-command delimitor */
 107   "",                           /* optional command terminator */
 108   &w89k_ops,                            /* target operations */
 109   "xmodem-srec,xmodem-som",             /* load types */
 110   w89k_regnames                         /* registers names */
 111 };
 112
 113 void
 114 w89k_open(args, from_tty)
 115      char *args;
 116      int from_tty;
 117 {
 118   target_preopen(from_tty);
 119   push_target  (&w89k_ops);
 120   push_monitor (&w89k_cmds);
 121   monitor_open (args, "w89k", from_tty);
 122 }
 123
 124 void
 125 _initialize_w89k ()
 126 {
 127   add_target (&w89k_ops);
 128
 129   /* this is the default, since it's the only baud rate supported by the hardware */
 130   baud_rate = 9600;
 131 }
 132
 133
 134
 135