gdbserver/linux-bfin-low.cc

   1 /* GNU/Linux/BFIN specific low level interface, for the remote server for GDB.
   2
   3    Copyright (C) 2005-2020 Free Software Foundation, Inc.
   4
   5    Contributed by Analog Devices, Inc.
   6
   7    This file is part of GDB.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  21
  22 #include "server.h"
  23 #include "linux-low.h"
  24 #include <asm/ptrace.h>
  25
  26 /* Linux target op definitions for the BFIN architecture.  */
  27
  28 class bfin_target : public linux_process_target
  29 {
  30 public:
  31
  32 protected:
  33
  34   void low_arch_setup () override;
  35 };
  36
  37 /* The singleton target ops object.  */
  38
  39 static bfin_target the_bfin_target;
  40
  41 /* Defined in auto-generated file reg-bfin.c.  */
  42 void init_registers_bfin (void);
  43 extern const struct target_desc *tdesc_bfin;
  44
  45 static int bfin_regmap[] =
  46 {
  47   PT_R0, PT_R1, PT_R2, PT_R3, PT_R4, PT_R5, PT_R6, PT_R7,
  48   PT_P0, PT_P1, PT_P2, PT_P3, PT_P4, PT_P5, PT_USP, PT_FP,
  49   PT_I0, PT_I1, PT_I2, PT_I3, PT_M0, PT_M1, PT_M2, PT_M3,
  50   PT_B0, PT_B1, PT_B2, PT_B3, PT_L0, PT_L1, PT_L2, PT_L3,
  51   PT_A0X, PT_A0W, PT_A1X, PT_A1W, PT_ASTAT, PT_RETS,
  52   PT_LC0, PT_LT0, PT_LB0, PT_LC1, PT_LT1, PT_LB1,
  53   -1 /* PT_CYCLES */, -1 /* PT_CYCLES2 */,
  54   -1 /* PT_USP */, PT_SEQSTAT, PT_SYSCFG, PT_PC, PT_RETX, PT_RETN, PT_RETE,
  55   PT_PC,
  56 };
  57
  58 #define bfin_num_regs ARRAY_SIZE (bfin_regmap)
  59
  60 static int
  61 bfin_cannot_store_register (int regno)
  62 {
  63   return (regno >= bfin_num_regs);
  64 }
  65
  66 static int
  67 bfin_cannot_fetch_register (int regno)
  68 {
  69   return (regno >= bfin_num_regs);
  70 }
  71
  72 #define bfin_breakpoint_len 2
  73 static const gdb_byte bfin_breakpoint[bfin_breakpoint_len] = {0xa1, 0x00};
  74
  75 /* Implementation of linux_target_ops method "sw_breakpoint_from_kind".  */
  76
  77 static const gdb_byte *
  78 bfin_sw_breakpoint_from_kind (int kind, int *size)
  79 {
  80   *size = bfin_breakpoint_len;
  81   return bfin_breakpoint;
  82 }
  83
  84 static int
  85 bfin_breakpoint_at (CORE_ADDR where)
  86 {
  87   unsigned char insn[bfin_breakpoint_len];
  88
  89   read_inferior_memory(where, insn, bfin_breakpoint_len);
  90   if (insn[0] == bfin_breakpoint[0]
  91       && insn[1] == bfin_breakpoint[1])
  92     return 1;
  93
  94   /* If necessary, recognize more trap instructions here.  GDB only uses the
  95      one.  */
  96   return 0;
  97 }
  98
  99 void
 100 bfin_target::low_arch_setup ()
 101 {
 102   current_process ()->tdesc = tdesc_bfin;
 103 }
 104
 105 /* Support for hardware single step.  */
 106
 107 static int
 108 bfin_supports_hardware_single_step (void)
 109 {
 110   return 1;
 111 }
 112
 113 static struct usrregs_info bfin_usrregs_info =
 114   {
 115     bfin_num_regs,
 116     bfin_regmap,
 117   };
 118
 119 static struct regs_info regs_info =
 120   {
 121     NULL, /* regset_bitmap */
 122     &bfin_usrregs_info,
 123   };
 124
 125 static const struct regs_info *
 126 bfin_regs_info (void)
 127 {
 128   return &regs_info;
 129 }
 130
 131 struct linux_target_ops the_low_target = {
 132   bfin_regs_info,
 133   bfin_cannot_fetch_register,
 134   bfin_cannot_store_register,
 135   NULL, /* fetch_register */
 136   linux_get_pc_32bit,
 137   linux_set_pc_32bit,
 138   NULL, /* breakpoint_kind_from_pc */
 139   bfin_sw_breakpoint_from_kind,
 140   NULL, /* get_next_pcs */
 141   2,
 142   bfin_breakpoint_at,
 143   NULL, /* supports_z_point_type */
 144   NULL, /* insert_point */
 145   NULL, /* remove_point */
 146   NULL, /* stopped_by_watchpoint */
 147   NULL, /* stopped_data_address */
 148   NULL, /* collect_ptrace_register */
 149   NULL, /* supply_ptrace_register */
 150   NULL, /* siginfo_fixup */
 151   NULL, /* new_process */
 152   NULL, /* delete_process */
 153   NULL, /* new_thread */
 154   NULL, /* delete_thread */
 155   NULL, /* new_fork */
 156   NULL, /* prepare_to_resume */
 157   NULL, /* process_qsupported */
 158   NULL, /* supports_tracepoints */
 159   NULL, /* get_thread_area */
 160   NULL, /* install_fast_tracepoint_jump_pad */
 161   NULL, /* emit_ops */
 162   NULL, /* get_min_fast_tracepoint_insn_len */
 163   NULL, /* supports_range_stepping */
 164   NULL, /* breakpoint_kind_from_current_state */
 165   bfin_supports_hardware_single_step,
 166 };
 167
 168 /* The linux target ops object.  */
 169
 170 linux_process_target *the_linux_target = &the_bfin_target;
 171
 172 void
 173 initialize_low_arch (void)
 174 {
 175   init_registers_bfin ();
 176 }