1 // layout.cc -- lay out output file sections for gold
3 // Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012
4 // Free Software Foundation, Inc.
5 // Written by Ian Lance Taylor <iant@google.com>.
7 // This file is part of gold.
9 // This program is free software; you can redistribute it and/or modify
10 // it under the terms of the GNU General Public License as published by
11 // the Free Software Foundation; either version 3 of the License, or
12 // (at your option) any later version.
14 // This program is distributed in the hope that it will be useful,
15 // but WITHOUT ANY WARRANTY; without even the implied warranty of
16 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 // GNU General Public License for more details.
19 // You should have received a copy of the GNU General Public License
20 // along with this program; if not, write to the Free Software
21 // Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
22 // MA 02110-1301, USA.
35 #include "libiberty.h"
39 #include "parameters.h"
43 #include "script-sections.h"
48 #include "gdb-index.h"
49 #include "compressed_output.h"
50 #include "reduced_debug_output.h"
53 #include "descriptors.h"
55 #include "incremental.h"
63 // The total number of free lists used.
64 unsigned int Free_list::num_lists
= 0;
65 // The total number of free list nodes used.
66 unsigned int Free_list::num_nodes
= 0;
67 // The total number of calls to Free_list::remove.
68 unsigned int Free_list::num_removes
= 0;
69 // The total number of nodes visited during calls to Free_list::remove.
70 unsigned int Free_list::num_remove_visits
= 0;
71 // The total number of calls to Free_list::allocate.
72 unsigned int Free_list::num_allocates
= 0;
73 // The total number of nodes visited during calls to Free_list::allocate.
74 unsigned int Free_list::num_allocate_visits
= 0;
76 // Initialize the free list. Creates a single free list node that
77 // describes the entire region of length LEN. If EXTEND is true,
78 // allocate() is allowed to extend the region beyond its initial
82 Free_list::init(off_t len
, bool extend
)
84 this->list_
.push_front(Free_list_node(0, len
));
85 this->last_remove_
= this->list_
.begin();
86 this->extend_
= extend
;
88 ++Free_list::num_lists
;
89 ++Free_list::num_nodes
;
92 // Remove a chunk from the free list. Because we start with a single
93 // node that covers the entire section, and remove chunks from it one
94 // at a time, we do not need to coalesce chunks or handle cases that
95 // span more than one free node. We expect to remove chunks from the
96 // free list in order, and we expect to have only a few chunks of free
97 // space left (corresponding to files that have changed since the last
98 // incremental link), so a simple linear list should provide sufficient
102 Free_list::remove(off_t start
, off_t end
)
106 gold_assert(start
< end
);
108 ++Free_list::num_removes
;
110 Iterator p
= this->last_remove_
;
111 if (p
->start_
> start
)
112 p
= this->list_
.begin();
114 for (; p
!= this->list_
.end(); ++p
)
116 ++Free_list::num_remove_visits
;
117 // Find a node that wholly contains the indicated region.
118 if (p
->start_
<= start
&& p
->end_
>= end
)
120 // Case 1: the indicated region spans the whole node.
121 // Add some fuzz to avoid creating tiny free chunks.
122 if (p
->start_
+ 3 >= start
&& p
->end_
<= end
+ 3)
123 p
= this->list_
.erase(p
);
124 // Case 2: remove a chunk from the start of the node.
125 else if (p
->start_
+ 3 >= start
)
127 // Case 3: remove a chunk from the end of the node.
128 else if (p
->end_
<= end
+ 3)
130 // Case 4: remove a chunk from the middle, and split
131 // the node into two.
134 Free_list_node
newnode(p
->start_
, start
);
136 this->list_
.insert(p
, newnode
);
137 ++Free_list::num_nodes
;
139 this->last_remove_
= p
;
144 // Did not find a node containing the given chunk. This could happen
145 // because a small chunk was already removed due to the fuzz.
146 gold_debug(DEBUG_INCREMENTAL
,
147 "Free_list::remove(%d,%d) not found",
148 static_cast<int>(start
), static_cast<int>(end
));
151 // Allocate a chunk of size LEN from the free list. Returns -1ULL
152 // if a sufficiently large chunk of free space is not found.
153 // We use a simple first-fit algorithm.
156 Free_list::allocate(off_t len
, uint64_t align
, off_t minoff
)
158 gold_debug(DEBUG_INCREMENTAL
,
159 "Free_list::allocate(%08lx, %d, %08lx)",
160 static_cast<long>(len
), static_cast<int>(align
),
161 static_cast<long>(minoff
));
163 return align_address(minoff
, align
);
165 ++Free_list::num_allocates
;
167 // We usually want to drop free chunks smaller than 4 bytes.
168 // If we need to guarantee a minimum hole size, though, we need
169 // to keep track of all free chunks.
170 const int fuzz
= this->min_hole_
> 0 ? 0 : 3;
172 for (Iterator p
= this->list_
.begin(); p
!= this->list_
.end(); ++p
)
174 ++Free_list::num_allocate_visits
;
175 off_t start
= p
->start_
> minoff
? p
->start_
: minoff
;
176 start
= align_address(start
, align
);
177 off_t end
= start
+ len
;
178 if (end
> p
->end_
&& p
->end_
== this->length_
&& this->extend_
)
183 if (end
== p
->end_
|| (end
<= p
->end_
- this->min_hole_
))
185 if (p
->start_
+ fuzz
>= start
&& p
->end_
<= end
+ fuzz
)
186 this->list_
.erase(p
);
187 else if (p
->start_
+ fuzz
>= start
)
189 else if (p
->end_
<= end
+ fuzz
)
193 Free_list_node
newnode(p
->start_
, start
);
195 this->list_
.insert(p
, newnode
);
196 ++Free_list::num_nodes
;
203 off_t start
= align_address(this->length_
, align
);
204 this->length_
= start
+ len
;
210 // Dump the free list (for debugging).
214 gold_info("Free list:\n start end length\n");
215 for (Iterator p
= this->list_
.begin(); p
!= this->list_
.end(); ++p
)
216 gold_info(" %08lx %08lx %08lx", static_cast<long>(p
->start_
),
217 static_cast<long>(p
->end_
),
218 static_cast<long>(p
->end_
- p
->start_
));
221 // Print the statistics for the free lists.
223 Free_list::print_stats()
225 fprintf(stderr
, _("%s: total free lists: %u\n"),
226 program_name
, Free_list::num_lists
);
227 fprintf(stderr
, _("%s: total free list nodes: %u\n"),
228 program_name
, Free_list::num_nodes
);
229 fprintf(stderr
, _("%s: calls to Free_list::remove: %u\n"),
230 program_name
, Free_list::num_removes
);
231 fprintf(stderr
, _("%s: nodes visited: %u\n"),
232 program_name
, Free_list::num_remove_visits
);
233 fprintf(stderr
, _("%s: calls to Free_list::allocate: %u\n"),
234 program_name
, Free_list::num_allocates
);
235 fprintf(stderr
, _("%s: nodes visited: %u\n"),
236 program_name
, Free_list::num_allocate_visits
);
239 // Layout::Relaxation_debug_check methods.
241 // Check that sections and special data are in reset states.
242 // We do not save states for Output_sections and special Output_data.
243 // So we check that they have not assigned any addresses or offsets.
244 // clean_up_after_relaxation simply resets their addresses and offsets.
246 Layout::Relaxation_debug_check::check_output_data_for_reset_values(
247 const Layout::Section_list
& sections
,
248 const Layout::Data_list
& special_outputs
)
250 for(Layout::Section_list::const_iterator p
= sections
.begin();
253 gold_assert((*p
)->address_and_file_offset_have_reset_values());
255 for(Layout::Data_list::const_iterator p
= special_outputs
.begin();
256 p
!= special_outputs
.end();
258 gold_assert((*p
)->address_and_file_offset_have_reset_values());
261 // Save information of SECTIONS for checking later.
264 Layout::Relaxation_debug_check::read_sections(
265 const Layout::Section_list
& sections
)
267 for(Layout::Section_list::const_iterator p
= sections
.begin();
271 Output_section
* os
= *p
;
273 info
.output_section
= os
;
274 info
.address
= os
->is_address_valid() ? os
->address() : 0;
275 info
.data_size
= os
->is_data_size_valid() ? os
->data_size() : -1;
276 info
.offset
= os
->is_offset_valid()? os
->offset() : -1 ;
277 this->section_infos_
.push_back(info
);
281 // Verify SECTIONS using previously recorded information.
284 Layout::Relaxation_debug_check::verify_sections(
285 const Layout::Section_list
& sections
)
288 for(Layout::Section_list::const_iterator p
= sections
.begin();
292 Output_section
* os
= *p
;
293 uint64_t address
= os
->is_address_valid() ? os
->address() : 0;
294 off_t data_size
= os
->is_data_size_valid() ? os
->data_size() : -1;
295 off_t offset
= os
->is_offset_valid()? os
->offset() : -1 ;
297 if (i
>= this->section_infos_
.size())
299 gold_fatal("Section_info of %s missing.\n", os
->name());
301 const Section_info
& info
= this->section_infos_
[i
];
302 if (os
!= info
.output_section
)
303 gold_fatal("Section order changed. Expecting %s but see %s\n",
304 info
.output_section
->name(), os
->name());
305 if (address
!= info
.address
306 || data_size
!= info
.data_size
307 || offset
!= info
.offset
)
308 gold_fatal("Section %s changed.\n", os
->name());
312 // Layout_task_runner methods.
314 // Lay out the sections. This is called after all the input objects
318 Layout_task_runner::run(Workqueue
* workqueue
, const Task
* task
)
320 Layout
* layout
= this->layout_
;
321 off_t file_size
= layout
->finalize(this->input_objects_
,
326 // Now we know the final size of the output file and we know where
327 // each piece of information goes.
329 if (this->mapfile_
!= NULL
)
331 this->mapfile_
->print_discarded_sections(this->input_objects_
);
332 layout
->print_to_mapfile(this->mapfile_
);
336 if (layout
->incremental_base() == NULL
)
338 of
= new Output_file(parameters
->options().output_file_name());
339 if (this->options_
.oformat_enum() != General_options::OBJECT_FORMAT_ELF
)
340 of
->set_is_temporary();
345 of
= layout
->incremental_base()->output_file();
347 // Apply the incremental relocations for symbols whose values
348 // have changed. We do this before we resize the file and start
349 // writing anything else to it, so that we can read the old
350 // incremental information from the file before (possibly)
352 if (parameters
->incremental_update())
353 layout
->incremental_base()->apply_incremental_relocs(this->symtab_
,
357 of
->resize(file_size
);
360 // Queue up the final set of tasks.
361 gold::queue_final_tasks(this->options_
, this->input_objects_
,
362 this->symtab_
, layout
, workqueue
, of
);
367 Layout::Layout(int number_of_input_files
, Script_options
* script_options
)
368 : number_of_input_files_(number_of_input_files
),
369 script_options_(script_options
),
377 unattached_section_list_(),
378 special_output_list_(),
379 section_headers_(NULL
),
381 relro_segment_(NULL
),
382 interp_segment_(NULL
),
384 symtab_section_(NULL
),
385 symtab_xindex_(NULL
),
386 dynsym_section_(NULL
),
387 dynsym_xindex_(NULL
),
388 dynamic_section_(NULL
),
389 dynamic_symbol_(NULL
),
391 eh_frame_section_(NULL
),
392 eh_frame_data_(NULL
),
393 added_eh_frame_data_(false),
394 eh_frame_hdr_section_(NULL
),
395 gdb_index_data_(NULL
),
396 build_id_note_(NULL
),
400 output_file_size_(-1),
401 have_added_input_section_(false),
402 sections_are_attached_(false),
403 input_requires_executable_stack_(false),
404 input_with_gnu_stack_note_(false),
405 input_without_gnu_stack_note_(false),
406 has_static_tls_(false),
407 any_postprocessing_sections_(false),
408 resized_signatures_(false),
409 have_stabstr_section_(false),
410 section_ordering_specified_(false),
411 unique_segment_for_sections_specified_(false),
412 incremental_inputs_(NULL
),
413 record_output_section_data_from_script_(false),
414 script_output_section_data_list_(),
415 segment_states_(NULL
),
416 relaxation_debug_check_(NULL
),
417 section_order_map_(),
418 section_segment_map_(),
419 input_section_position_(),
420 input_section_glob_(),
421 incremental_base_(NULL
),
424 // Make space for more than enough segments for a typical file.
425 // This is just for efficiency--it's OK if we wind up needing more.
426 this->segment_list_
.reserve(12);
428 // We expect two unattached Output_data objects: the file header and
429 // the segment headers.
430 this->special_output_list_
.reserve(2);
432 // Initialize structure needed for an incremental build.
433 if (parameters
->incremental())
434 this->incremental_inputs_
= new Incremental_inputs
;
436 // The section name pool is worth optimizing in all cases, because
437 // it is small, but there are often overlaps due to .rel sections.
438 this->namepool_
.set_optimize();
441 // For incremental links, record the base file to be modified.
444 Layout::set_incremental_base(Incremental_binary
* base
)
446 this->incremental_base_
= base
;
447 this->free_list_
.init(base
->output_file()->filesize(), true);
450 // Hash a key we use to look up an output section mapping.
453 Layout::Hash_key::operator()(const Layout::Key
& k
) const
455 return k
.first
+ k
.second
.first
+ k
.second
.second
;
458 // These are the debug sections that are actually used by gdb.
459 // Currently, we've checked versions of gdb up to and including 7.4.
460 // We only check the part of the name that follows ".debug_" or
463 static const char* gdb_sections
[] =
466 "addr", // Fission extension
467 // "aranges", // not used by gdb as of 7.4
475 // "pubnames", // not used by gdb as of 7.4
476 // "pubtypes", // not used by gdb as of 7.4
481 // This is the minimum set of sections needed for line numbers.
483 static const char* lines_only_debug_sections
[] =
486 // "addr", // Fission extension
487 // "aranges", // not used by gdb as of 7.4
495 // "pubnames", // not used by gdb as of 7.4
496 // "pubtypes", // not used by gdb as of 7.4
501 // These sections are the DWARF fast-lookup tables, and are not needed
502 // when building a .gdb_index section.
504 static const char* gdb_fast_lookup_sections
[] =
511 // Returns whether the given debug section is in the list of
512 // debug-sections-used-by-some-version-of-gdb. SUFFIX is the
513 // portion of the name following ".debug_" or ".zdebug_".
516 is_gdb_debug_section(const char* suffix
)
518 // We can do this faster: binary search or a hashtable. But why bother?
519 for (size_t i
= 0; i
< sizeof(gdb_sections
)/sizeof(*gdb_sections
); ++i
)
520 if (strcmp(suffix
, gdb_sections
[i
]) == 0)
525 // Returns whether the given section is needed for lines-only debugging.
528 is_lines_only_debug_section(const char* suffix
)
530 // We can do this faster: binary search or a hashtable. But why bother?
532 i
< sizeof(lines_only_debug_sections
)/sizeof(*lines_only_debug_sections
);
534 if (strcmp(suffix
, lines_only_debug_sections
[i
]) == 0)
539 // Returns whether the given section is a fast-lookup section that
540 // will not be needed when building a .gdb_index section.
543 is_gdb_fast_lookup_section(const char* suffix
)
545 // We can do this faster: binary search or a hashtable. But why bother?
547 i
< sizeof(gdb_fast_lookup_sections
)/sizeof(*gdb_fast_lookup_sections
);
549 if (strcmp(suffix
, gdb_fast_lookup_sections
[i
]) == 0)
554 // Sometimes we compress sections. This is typically done for
555 // sections that are not part of normal program execution (such as
556 // .debug_* sections), and where the readers of these sections know
557 // how to deal with compressed sections. This routine doesn't say for
558 // certain whether we'll compress -- it depends on commandline options
559 // as well -- just whether this section is a candidate for compression.
560 // (The Output_compressed_section class decides whether to compress
561 // a given section, and picks the name of the compressed section.)
564 is_compressible_debug_section(const char* secname
)
566 return (is_prefix_of(".debug", secname
));
569 // We may see compressed debug sections in input files. Return TRUE
570 // if this is the name of a compressed debug section.
573 is_compressed_debug_section(const char* secname
)
575 return (is_prefix_of(".zdebug", secname
));
578 // Whether to include this section in the link.
580 template<int size
, bool big_endian
>
582 Layout::include_section(Sized_relobj_file
<size
, big_endian
>*, const char* name
,
583 const elfcpp::Shdr
<size
, big_endian
>& shdr
)
585 if (!parameters
->options().relocatable()
586 && (shdr
.get_sh_flags() & elfcpp::SHF_EXCLUDE
))
589 switch (shdr
.get_sh_type())
591 case elfcpp::SHT_NULL
:
592 case elfcpp::SHT_SYMTAB
:
593 case elfcpp::SHT_DYNSYM
:
594 case elfcpp::SHT_HASH
:
595 case elfcpp::SHT_DYNAMIC
:
596 case elfcpp::SHT_SYMTAB_SHNDX
:
599 case elfcpp::SHT_STRTAB
:
600 // Discard the sections which have special meanings in the ELF
601 // ABI. Keep others (e.g., .stabstr). We could also do this by
602 // checking the sh_link fields of the appropriate sections.
603 return (strcmp(name
, ".dynstr") != 0
604 && strcmp(name
, ".strtab") != 0
605 && strcmp(name
, ".shstrtab") != 0);
607 case elfcpp::SHT_RELA
:
608 case elfcpp::SHT_REL
:
609 case elfcpp::SHT_GROUP
:
610 // If we are emitting relocations these should be handled
612 gold_assert(!parameters
->options().relocatable());
615 case elfcpp::SHT_PROGBITS
:
616 if (parameters
->options().strip_debug()
617 && (shdr
.get_sh_flags() & elfcpp::SHF_ALLOC
) == 0)
619 if (is_debug_info_section(name
))
622 if (parameters
->options().strip_debug_non_line()
623 && (shdr
.get_sh_flags() & elfcpp::SHF_ALLOC
) == 0)
625 // Debugging sections can only be recognized by name.
626 if (is_prefix_of(".debug_", name
)
627 && !is_lines_only_debug_section(name
+ 7))
629 if (is_prefix_of(".zdebug_", name
)
630 && !is_lines_only_debug_section(name
+ 8))
633 if (parameters
->options().strip_debug_gdb()
634 && (shdr
.get_sh_flags() & elfcpp::SHF_ALLOC
) == 0)
636 // Debugging sections can only be recognized by name.
637 if (is_prefix_of(".debug_", name
)
638 && !is_gdb_debug_section(name
+ 7))
640 if (is_prefix_of(".zdebug_", name
)
641 && !is_gdb_debug_section(name
+ 8))
644 if (parameters
->options().gdb_index()
645 && (shdr
.get_sh_flags() & elfcpp::SHF_ALLOC
) == 0)
647 // When building .gdb_index, we can strip .debug_pubnames,
648 // .debug_pubtypes, and .debug_aranges sections.
649 if (is_prefix_of(".debug_", name
)
650 && is_gdb_fast_lookup_section(name
+ 7))
652 if (is_prefix_of(".zdebug_", name
)
653 && is_gdb_fast_lookup_section(name
+ 8))
656 if (parameters
->options().strip_lto_sections()
657 && !parameters
->options().relocatable()
658 && (shdr
.get_sh_flags() & elfcpp::SHF_ALLOC
) == 0)
660 // Ignore LTO sections containing intermediate code.
661 if (is_prefix_of(".gnu.lto_", name
))
664 // The GNU linker strips .gnu_debuglink sections, so we do too.
665 // This is a feature used to keep debugging information in
667 if (strcmp(name
, ".gnu_debuglink") == 0)
676 // Return an output section named NAME, or NULL if there is none.
679 Layout::find_output_section(const char* name
) const
681 for (Section_list::const_iterator p
= this->section_list_
.begin();
682 p
!= this->section_list_
.end();
684 if (strcmp((*p
)->name(), name
) == 0)
689 // Return an output segment of type TYPE, with segment flags SET set
690 // and segment flags CLEAR clear. Return NULL if there is none.
693 Layout::find_output_segment(elfcpp::PT type
, elfcpp::Elf_Word set
,
694 elfcpp::Elf_Word clear
) const
696 for (Segment_list::const_iterator p
= this->segment_list_
.begin();
697 p
!= this->segment_list_
.end();
699 if (static_cast<elfcpp::PT
>((*p
)->type()) == type
700 && ((*p
)->flags() & set
) == set
701 && ((*p
)->flags() & clear
) == 0)
706 // When we put a .ctors or .dtors section with more than one word into
707 // a .init_array or .fini_array section, we need to reverse the words
708 // in the .ctors/.dtors section. This is because .init_array executes
709 // constructors front to back, where .ctors executes them back to
710 // front, and vice-versa for .fini_array/.dtors. Although we do want
711 // to remap .ctors/.dtors into .init_array/.fini_array because it can
712 // be more efficient, we don't want to change the order in which
713 // constructors/destructors are run. This set just keeps track of
714 // these sections which need to be reversed. It is only changed by
715 // Layout::layout. It should be a private member of Layout, but that
716 // would require layout.h to #include object.h to get the definition
718 static Unordered_set
<Section_id
, Section_id_hash
> ctors_sections_in_init_array
;
720 // Return whether OBJECT/SHNDX is a .ctors/.dtors section mapped to a
721 // .init_array/.fini_array section.
724 Layout::is_ctors_in_init_array(Relobj
* relobj
, unsigned int shndx
) const
726 return (ctors_sections_in_init_array
.find(Section_id(relobj
, shndx
))
727 != ctors_sections_in_init_array
.end());
730 // Return the output section to use for section NAME with type TYPE
731 // and section flags FLAGS. NAME must be canonicalized in the string
732 // pool, and NAME_KEY is the key. ORDER is where this should appear
733 // in the output sections. IS_RELRO is true for a relro section.
736 Layout::get_output_section(const char* name
, Stringpool::Key name_key
,
737 elfcpp::Elf_Word type
, elfcpp::Elf_Xword flags
,
738 Output_section_order order
, bool is_relro
)
740 elfcpp::Elf_Word lookup_type
= type
;
742 // For lookup purposes, treat INIT_ARRAY, FINI_ARRAY, and
743 // PREINIT_ARRAY like PROGBITS. This ensures that we combine
744 // .init_array, .fini_array, and .preinit_array sections by name
745 // whatever their type in the input file. We do this because the
746 // types are not always right in the input files.
747 if (lookup_type
== elfcpp::SHT_INIT_ARRAY
748 || lookup_type
== elfcpp::SHT_FINI_ARRAY
749 || lookup_type
== elfcpp::SHT_PREINIT_ARRAY
)
750 lookup_type
= elfcpp::SHT_PROGBITS
;
752 elfcpp::Elf_Xword lookup_flags
= flags
;
754 // Ignoring SHF_WRITE and SHF_EXECINSTR here means that we combine
755 // read-write with read-only sections. Some other ELF linkers do
756 // not do this. FIXME: Perhaps there should be an option
758 lookup_flags
&= ~(elfcpp::SHF_WRITE
| elfcpp::SHF_EXECINSTR
);
760 const Key
key(name_key
, std::make_pair(lookup_type
, lookup_flags
));
761 const std::pair
<Key
, Output_section
*> v(key
, NULL
);
762 std::pair
<Section_name_map::iterator
, bool> ins(
763 this->section_name_map_
.insert(v
));
766 return ins
.first
->second
;
769 // This is the first time we've seen this name/type/flags
770 // combination. For compatibility with the GNU linker, we
771 // combine sections with contents and zero flags with sections
772 // with non-zero flags. This is a workaround for cases where
773 // assembler code forgets to set section flags. FIXME: Perhaps
774 // there should be an option to control this.
775 Output_section
* os
= NULL
;
777 if (lookup_type
== elfcpp::SHT_PROGBITS
)
781 Output_section
* same_name
= this->find_output_section(name
);
782 if (same_name
!= NULL
783 && (same_name
->type() == elfcpp::SHT_PROGBITS
784 || same_name
->type() == elfcpp::SHT_INIT_ARRAY
785 || same_name
->type() == elfcpp::SHT_FINI_ARRAY
786 || same_name
->type() == elfcpp::SHT_PREINIT_ARRAY
)
787 && (same_name
->flags() & elfcpp::SHF_TLS
) == 0)
790 else if ((flags
& elfcpp::SHF_TLS
) == 0)
792 elfcpp::Elf_Xword zero_flags
= 0;
793 const Key
zero_key(name_key
, std::make_pair(lookup_type
,
795 Section_name_map::iterator p
=
796 this->section_name_map_
.find(zero_key
);
797 if (p
!= this->section_name_map_
.end())
803 os
= this->make_output_section(name
, type
, flags
, order
, is_relro
);
805 ins
.first
->second
= os
;
810 // Returns TRUE iff NAME (an input section from RELOBJ) will
811 // be mapped to an output section that should be KEPT.
814 Layout::keep_input_section(const Relobj
* relobj
, const char* name
)
816 if (! this->script_options_
->saw_sections_clause())
819 Script_sections
* ss
= this->script_options_
->script_sections();
820 const char* file_name
= relobj
== NULL
? NULL
: relobj
->name().c_str();
821 Output_section
** output_section_slot
;
822 Script_sections::Section_type script_section_type
;
825 name
= ss
->output_section_name(file_name
, name
, &output_section_slot
,
826 &script_section_type
, &keep
);
827 return name
!= NULL
&& keep
;
830 // Clear the input section flags that should not be copied to the
834 Layout::get_output_section_flags(elfcpp::Elf_Xword input_section_flags
)
836 // Some flags in the input section should not be automatically
837 // copied to the output section.
838 input_section_flags
&= ~ (elfcpp::SHF_INFO_LINK
841 | elfcpp::SHF_STRINGS
);
843 // We only clear the SHF_LINK_ORDER flag in for
844 // a non-relocatable link.
845 if (!parameters
->options().relocatable())
846 input_section_flags
&= ~elfcpp::SHF_LINK_ORDER
;
848 return input_section_flags
;
851 // Pick the output section to use for section NAME, in input file
852 // RELOBJ, with type TYPE and flags FLAGS. RELOBJ may be NULL for a
853 // linker created section. IS_INPUT_SECTION is true if we are
854 // choosing an output section for an input section found in a input
855 // file. ORDER is where this section should appear in the output
856 // sections. IS_RELRO is true for a relro section. This will return
857 // NULL if the input section should be discarded.
860 Layout::choose_output_section(const Relobj
* relobj
, const char* name
,
861 elfcpp::Elf_Word type
, elfcpp::Elf_Xword flags
,
862 bool is_input_section
, Output_section_order order
,
865 // We should not see any input sections after we have attached
866 // sections to segments.
867 gold_assert(!is_input_section
|| !this->sections_are_attached_
);
869 flags
= this->get_output_section_flags(flags
);
871 if (this->script_options_
->saw_sections_clause())
873 // We are using a SECTIONS clause, so the output section is
874 // chosen based only on the name.
876 Script_sections
* ss
= this->script_options_
->script_sections();
877 const char* file_name
= relobj
== NULL
? NULL
: relobj
->name().c_str();
878 Output_section
** output_section_slot
;
879 Script_sections::Section_type script_section_type
;
880 const char* orig_name
= name
;
882 name
= ss
->output_section_name(file_name
, name
, &output_section_slot
,
883 &script_section_type
, &keep
);
887 gold_debug(DEBUG_SCRIPT
, _("Unable to create output section '%s' "
888 "because it is not allowed by the "
889 "SECTIONS clause of the linker script"),
891 // The SECTIONS clause says to discard this input section.
895 // We can only handle script section types ST_NONE and ST_NOLOAD.
896 switch (script_section_type
)
898 case Script_sections::ST_NONE
:
900 case Script_sections::ST_NOLOAD
:
901 flags
&= elfcpp::SHF_ALLOC
;
907 // If this is an orphan section--one not mentioned in the linker
908 // script--then OUTPUT_SECTION_SLOT will be NULL, and we do the
909 // default processing below.
911 if (output_section_slot
!= NULL
)
913 if (*output_section_slot
!= NULL
)
915 (*output_section_slot
)->update_flags_for_input_section(flags
);
916 return *output_section_slot
;
919 // We don't put sections found in the linker script into
920 // SECTION_NAME_MAP_. That keeps us from getting confused
921 // if an orphan section is mapped to a section with the same
922 // name as one in the linker script.
924 name
= this->namepool_
.add(name
, false, NULL
);
926 Output_section
* os
= this->make_output_section(name
, type
, flags
,
929 os
->set_found_in_sections_clause();
931 // Special handling for NOLOAD sections.
932 if (script_section_type
== Script_sections::ST_NOLOAD
)
936 // The constructor of Output_section sets addresses of non-ALLOC
937 // sections to 0 by default. We don't want that for NOLOAD
938 // sections even if they have no SHF_ALLOC flag.
939 if ((os
->flags() & elfcpp::SHF_ALLOC
) == 0
940 && os
->is_address_valid())
942 gold_assert(os
->address() == 0
943 && !os
->is_offset_valid()
944 && !os
->is_data_size_valid());
945 os
->reset_address_and_file_offset();
949 *output_section_slot
= os
;
954 // FIXME: Handle SHF_OS_NONCONFORMING somewhere.
956 size_t len
= strlen(name
);
957 char* uncompressed_name
= NULL
;
959 // Compressed debug sections should be mapped to the corresponding
960 // uncompressed section.
961 if (is_compressed_debug_section(name
))
963 uncompressed_name
= new char[len
];
964 uncompressed_name
[0] = '.';
965 gold_assert(name
[0] == '.' && name
[1] == 'z');
966 strncpy(&uncompressed_name
[1], &name
[2], len
- 2);
967 uncompressed_name
[len
- 1] = '\0';
969 name
= uncompressed_name
;
972 // Turn NAME from the name of the input section into the name of the
975 && !this->script_options_
->saw_sections_clause()
976 && !parameters
->options().relocatable())
978 const char *orig_name
= name
;
979 name
= parameters
->target().output_section_name(relobj
, name
, &len
);
981 name
= Layout::output_section_name(relobj
, orig_name
, &len
);
984 Stringpool::Key name_key
;
985 name
= this->namepool_
.add_with_length(name
, len
, true, &name_key
);
987 if (uncompressed_name
!= NULL
)
988 delete[] uncompressed_name
;
990 // Find or make the output section. The output section is selected
991 // based on the section name, type, and flags.
992 return this->get_output_section(name
, name_key
, type
, flags
, order
, is_relro
);
995 // For incremental links, record the initial fixed layout of a section
996 // from the base file, and return a pointer to the Output_section.
998 template<int size
, bool big_endian
>
1000 Layout::init_fixed_output_section(const char* name
,
1001 elfcpp::Shdr
<size
, big_endian
>& shdr
)
1003 unsigned int sh_type
= shdr
.get_sh_type();
1005 // We preserve the layout of PROGBITS, NOBITS, INIT_ARRAY, FINI_ARRAY,
1006 // PRE_INIT_ARRAY, and NOTE sections.
1007 // All others will be created from scratch and reallocated.
1008 if (!can_incremental_update(sh_type
))
1011 // If we're generating a .gdb_index section, we need to regenerate
1013 if (parameters
->options().gdb_index()
1014 && sh_type
== elfcpp::SHT_PROGBITS
1015 && strcmp(name
, ".gdb_index") == 0)
1018 typename
elfcpp::Elf_types
<size
>::Elf_Addr sh_addr
= shdr
.get_sh_addr();
1019 typename
elfcpp::Elf_types
<size
>::Elf_Off sh_offset
= shdr
.get_sh_offset();
1020 typename
elfcpp::Elf_types
<size
>::Elf_WXword sh_size
= shdr
.get_sh_size();
1021 typename
elfcpp::Elf_types
<size
>::Elf_WXword sh_flags
= shdr
.get_sh_flags();
1022 typename
elfcpp::Elf_types
<size
>::Elf_WXword sh_addralign
=
1023 shdr
.get_sh_addralign();
1025 // Make the output section.
1026 Stringpool::Key name_key
;
1027 name
= this->namepool_
.add(name
, true, &name_key
);
1028 Output_section
* os
= this->get_output_section(name
, name_key
, sh_type
,
1029 sh_flags
, ORDER_INVALID
, false);
1030 os
->set_fixed_layout(sh_addr
, sh_offset
, sh_size
, sh_addralign
);
1031 if (sh_type
!= elfcpp::SHT_NOBITS
)
1032 this->free_list_
.remove(sh_offset
, sh_offset
+ sh_size
);
1036 // Return the output section to use for input section SHNDX, with name
1037 // NAME, with header HEADER, from object OBJECT. RELOC_SHNDX is the
1038 // index of a relocation section which applies to this section, or 0
1039 // if none, or -1U if more than one. RELOC_TYPE is the type of the
1040 // relocation section if there is one. Set *OFF to the offset of this
1041 // input section without the output section. Return NULL if the
1042 // section should be discarded. Set *OFF to -1 if the section
1043 // contents should not be written directly to the output file, but
1044 // will instead receive special handling.
1046 template<int size
, bool big_endian
>
1048 Layout::layout(Sized_relobj_file
<size
, big_endian
>* object
, unsigned int shndx
,
1049 const char* name
, const elfcpp::Shdr
<size
, big_endian
>& shdr
,
1050 unsigned int reloc_shndx
, unsigned int, off_t
* off
)
1054 if (!this->include_section(object
, name
, shdr
))
1057 elfcpp::Elf_Word sh_type
= shdr
.get_sh_type();
1059 // In a relocatable link a grouped section must not be combined with
1060 // any other sections.
1062 if (parameters
->options().relocatable()
1063 && (shdr
.get_sh_flags() & elfcpp::SHF_GROUP
) != 0)
1065 name
= this->namepool_
.add(name
, true, NULL
);
1066 os
= this->make_output_section(name
, sh_type
, shdr
.get_sh_flags(),
1067 ORDER_INVALID
, false);
1071 // Plugins can choose to place one or more subsets of sections in
1072 // unique segments and this is done by mapping these section subsets
1073 // to unique output sections. Check if this section needs to be
1074 // remapped to a unique output section.
1075 Section_segment_map::iterator it
1076 = this->section_segment_map_
.find(Const_section_id(object
, shndx
));
1077 if (it
== this->section_segment_map_
.end())
1079 os
= this->choose_output_section(object
, name
, sh_type
,
1080 shdr
.get_sh_flags(), true,
1081 ORDER_INVALID
, false);
1085 // We know the name of the output section, directly call
1086 // get_output_section here by-passing choose_output_section.
1087 elfcpp::Elf_Xword flags
1088 = this->get_output_section_flags(shdr
.get_sh_flags());
1090 const char* os_name
= it
->second
->name
;
1091 Stringpool::Key name_key
;
1092 os_name
= this->namepool_
.add(os_name
, true, &name_key
);
1093 os
= this->get_output_section(os_name
, name_key
, sh_type
, flags
,
1094 ORDER_INVALID
, false);
1095 if (!os
->is_unique_segment())
1097 os
->set_is_unique_segment();
1098 os
->set_extra_segment_flags(it
->second
->flags
);
1099 os
->set_segment_alignment(it
->second
->align
);
1106 // By default the GNU linker sorts input sections whose names match
1107 // .ctors.*, .dtors.*, .init_array.*, or .fini_array.*. The
1108 // sections are sorted by name. This is used to implement
1109 // constructor priority ordering. We are compatible. When we put
1110 // .ctor sections in .init_array and .dtor sections in .fini_array,
1111 // we must also sort plain .ctor and .dtor sections.
1112 if (!this->script_options_
->saw_sections_clause()
1113 && !parameters
->options().relocatable()
1114 && (is_prefix_of(".ctors.", name
)
1115 || is_prefix_of(".dtors.", name
)
1116 || is_prefix_of(".init_array.", name
)
1117 || is_prefix_of(".fini_array.", name
)
1118 || (parameters
->options().ctors_in_init_array()
1119 && (strcmp(name
, ".ctors") == 0
1120 || strcmp(name
, ".dtors") == 0))))
1121 os
->set_must_sort_attached_input_sections();
1123 // If this is a .ctors or .ctors.* section being mapped to a
1124 // .init_array section, or a .dtors or .dtors.* section being mapped
1125 // to a .fini_array section, we will need to reverse the words if
1126 // there is more than one. Record this section for later. See
1127 // ctors_sections_in_init_array above.
1128 if (!this->script_options_
->saw_sections_clause()
1129 && !parameters
->options().relocatable()
1130 && shdr
.get_sh_size() > size
/ 8
1131 && (((strcmp(name
, ".ctors") == 0
1132 || is_prefix_of(".ctors.", name
))
1133 && strcmp(os
->name(), ".init_array") == 0)
1134 || ((strcmp(name
, ".dtors") == 0
1135 || is_prefix_of(".dtors.", name
))
1136 && strcmp(os
->name(), ".fini_array") == 0)))
1137 ctors_sections_in_init_array
.insert(Section_id(object
, shndx
));
1139 // FIXME: Handle SHF_LINK_ORDER somewhere.
1141 elfcpp::Elf_Xword orig_flags
= os
->flags();
1143 *off
= os
->add_input_section(this, object
, shndx
, name
, shdr
, reloc_shndx
,
1144 this->script_options_
->saw_sections_clause());
1146 // If the flags changed, we may have to change the order.
1147 if ((orig_flags
& elfcpp::SHF_ALLOC
) != 0)
1149 orig_flags
&= (elfcpp::SHF_WRITE
| elfcpp::SHF_EXECINSTR
);
1150 elfcpp::Elf_Xword new_flags
=
1151 os
->flags() & (elfcpp::SHF_WRITE
| elfcpp::SHF_EXECINSTR
);
1152 if (orig_flags
!= new_flags
)
1153 os
->set_order(this->default_section_order(os
, false));
1156 this->have_added_input_section_
= true;
1161 // Maps section SECN to SEGMENT s.
1163 Layout::insert_section_segment_map(Const_section_id secn
,
1164 Unique_segment_info
*s
)
1166 gold_assert(this->unique_segment_for_sections_specified_
);
1167 this->section_segment_map_
[secn
] = s
;
1170 // Handle a relocation section when doing a relocatable link.
1172 template<int size
, bool big_endian
>
1174 Layout::layout_reloc(Sized_relobj_file
<size
, big_endian
>* object
,
1176 const elfcpp::Shdr
<size
, big_endian
>& shdr
,
1177 Output_section
* data_section
,
1178 Relocatable_relocs
* rr
)
1180 gold_assert(parameters
->options().relocatable()
1181 || parameters
->options().emit_relocs());
1183 int sh_type
= shdr
.get_sh_type();
1186 if (sh_type
== elfcpp::SHT_REL
)
1188 else if (sh_type
== elfcpp::SHT_RELA
)
1192 name
+= data_section
->name();
1194 // In a relocatable link relocs for a grouped section must not be
1195 // combined with other reloc sections.
1197 if (!parameters
->options().relocatable()
1198 || (data_section
->flags() & elfcpp::SHF_GROUP
) == 0)
1199 os
= this->choose_output_section(object
, name
.c_str(), sh_type
,
1200 shdr
.get_sh_flags(), false,
1201 ORDER_INVALID
, false);
1204 const char* n
= this->namepool_
.add(name
.c_str(), true, NULL
);
1205 os
= this->make_output_section(n
, sh_type
, shdr
.get_sh_flags(),
1206 ORDER_INVALID
, false);
1209 os
->set_should_link_to_symtab();
1210 os
->set_info_section(data_section
);
1212 Output_section_data
* posd
;
1213 if (sh_type
== elfcpp::SHT_REL
)
1215 os
->set_entsize(elfcpp::Elf_sizes
<size
>::rel_size
);
1216 posd
= new Output_relocatable_relocs
<elfcpp::SHT_REL
,
1220 else if (sh_type
== elfcpp::SHT_RELA
)
1222 os
->set_entsize(elfcpp::Elf_sizes
<size
>::rela_size
);
1223 posd
= new Output_relocatable_relocs
<elfcpp::SHT_RELA
,
1230 os
->add_output_section_data(posd
);
1231 rr
->set_output_data(posd
);
1236 // Handle a group section when doing a relocatable link.
1238 template<int size
, bool big_endian
>
1240 Layout::layout_group(Symbol_table
* symtab
,
1241 Sized_relobj_file
<size
, big_endian
>* object
,
1243 const char* group_section_name
,
1244 const char* signature
,
1245 const elfcpp::Shdr
<size
, big_endian
>& shdr
,
1246 elfcpp::Elf_Word flags
,
1247 std::vector
<unsigned int>* shndxes
)
1249 gold_assert(parameters
->options().relocatable());
1250 gold_assert(shdr
.get_sh_type() == elfcpp::SHT_GROUP
);
1251 group_section_name
= this->namepool_
.add(group_section_name
, true, NULL
);
1252 Output_section
* os
= this->make_output_section(group_section_name
,
1254 shdr
.get_sh_flags(),
1255 ORDER_INVALID
, false);
1257 // We need to find a symbol with the signature in the symbol table.
1258 // If we don't find one now, we need to look again later.
1259 Symbol
* sym
= symtab
->lookup(signature
, NULL
);
1261 os
->set_info_symndx(sym
);
1264 // Reserve some space to minimize reallocations.
1265 if (this->group_signatures_
.empty())
1266 this->group_signatures_
.reserve(this->number_of_input_files_
* 16);
1268 // We will wind up using a symbol whose name is the signature.
1269 // So just put the signature in the symbol name pool to save it.
1270 signature
= symtab
->canonicalize_name(signature
);
1271 this->group_signatures_
.push_back(Group_signature(os
, signature
));
1274 os
->set_should_link_to_symtab();
1277 section_size_type entry_count
=
1278 convert_to_section_size_type(shdr
.get_sh_size() / 4);
1279 Output_section_data
* posd
=
1280 new Output_data_group
<size
, big_endian
>(object
, entry_count
, flags
,
1282 os
->add_output_section_data(posd
);
1285 // Special GNU handling of sections name .eh_frame. They will
1286 // normally hold exception frame data as defined by the C++ ABI
1287 // (http://codesourcery.com/cxx-abi/).
1289 template<int size
, bool big_endian
>
1291 Layout::layout_eh_frame(Sized_relobj_file
<size
, big_endian
>* object
,
1292 const unsigned char* symbols
,
1294 const unsigned char* symbol_names
,
1295 off_t symbol_names_size
,
1297 const elfcpp::Shdr
<size
, big_endian
>& shdr
,
1298 unsigned int reloc_shndx
, unsigned int reloc_type
,
1301 gold_assert(shdr
.get_sh_type() == elfcpp::SHT_PROGBITS
1302 || shdr
.get_sh_type() == elfcpp::SHT_X86_64_UNWIND
);
1303 gold_assert((shdr
.get_sh_flags() & elfcpp::SHF_ALLOC
) != 0);
1305 Output_section
* os
= this->make_eh_frame_section(object
);
1309 gold_assert(this->eh_frame_section_
== os
);
1311 elfcpp::Elf_Xword orig_flags
= os
->flags();
1313 if (!parameters
->incremental()
1314 && this->eh_frame_data_
->add_ehframe_input_section(object
,
1323 os
->update_flags_for_input_section(shdr
.get_sh_flags());
1325 // A writable .eh_frame section is a RELRO section.
1326 if ((orig_flags
& (elfcpp::SHF_WRITE
| elfcpp::SHF_EXECINSTR
))
1327 != (os
->flags() & (elfcpp::SHF_WRITE
| elfcpp::SHF_EXECINSTR
)))
1330 os
->set_order(ORDER_RELRO
);
1333 // We found a .eh_frame section we are going to optimize, so now
1334 // we can add the set of optimized sections to the output
1335 // section. We need to postpone adding this until we've found a
1336 // section we can optimize so that the .eh_frame section in
1337 // crtbegin.o winds up at the start of the output section.
1338 if (!this->added_eh_frame_data_
)
1340 os
->add_output_section_data(this->eh_frame_data_
);
1341 this->added_eh_frame_data_
= true;
1347 // We couldn't handle this .eh_frame section for some reason.
1348 // Add it as a normal section.
1349 bool saw_sections_clause
= this->script_options_
->saw_sections_clause();
1350 *off
= os
->add_input_section(this, object
, shndx
, ".eh_frame", shdr
,
1351 reloc_shndx
, saw_sections_clause
);
1352 this->have_added_input_section_
= true;
1354 if ((orig_flags
& (elfcpp::SHF_WRITE
| elfcpp::SHF_EXECINSTR
))
1355 != (os
->flags() & (elfcpp::SHF_WRITE
| elfcpp::SHF_EXECINSTR
)))
1356 os
->set_order(this->default_section_order(os
, false));
1362 // Create and return the magic .eh_frame section. Create
1363 // .eh_frame_hdr also if appropriate. OBJECT is the object with the
1364 // input .eh_frame section; it may be NULL.
1367 Layout::make_eh_frame_section(const Relobj
* object
)
1369 // FIXME: On x86_64, this could use SHT_X86_64_UNWIND rather than
1371 Output_section
* os
= this->choose_output_section(object
, ".eh_frame",
1372 elfcpp::SHT_PROGBITS
,
1373 elfcpp::SHF_ALLOC
, false,
1374 ORDER_EHFRAME
, false);
1378 if (this->eh_frame_section_
== NULL
)
1380 this->eh_frame_section_
= os
;
1381 this->eh_frame_data_
= new Eh_frame();
1383 // For incremental linking, we do not optimize .eh_frame sections
1384 // or create a .eh_frame_hdr section.
1385 if (parameters
->options().eh_frame_hdr() && !parameters
->incremental())
1387 Output_section
* hdr_os
=
1388 this->choose_output_section(NULL
, ".eh_frame_hdr",
1389 elfcpp::SHT_PROGBITS
,
1390 elfcpp::SHF_ALLOC
, false,
1391 ORDER_EHFRAME
, false);
1395 Eh_frame_hdr
* hdr_posd
= new Eh_frame_hdr(os
,
1396 this->eh_frame_data_
);
1397 hdr_os
->add_output_section_data(hdr_posd
);
1399 hdr_os
->set_after_input_sections();
1401 if (!this->script_options_
->saw_phdrs_clause())
1403 Output_segment
* hdr_oseg
;
1404 hdr_oseg
= this->make_output_segment(elfcpp::PT_GNU_EH_FRAME
,
1406 hdr_oseg
->add_output_section_to_nonload(hdr_os
,
1410 this->eh_frame_data_
->set_eh_frame_hdr(hdr_posd
);
1418 // Add an exception frame for a PLT. This is called from target code.
1421 Layout::add_eh_frame_for_plt(Output_data
* plt
, const unsigned char* cie_data
,
1422 size_t cie_length
, const unsigned char* fde_data
,
1425 if (parameters
->incremental())
1427 // FIXME: Maybe this could work some day....
1430 Output_section
* os
= this->make_eh_frame_section(NULL
);
1433 this->eh_frame_data_
->add_ehframe_for_plt(plt
, cie_data
, cie_length
,
1434 fde_data
, fde_length
);
1435 if (!this->added_eh_frame_data_
)
1437 os
->add_output_section_data(this->eh_frame_data_
);
1438 this->added_eh_frame_data_
= true;
1442 // Scan a .debug_info or .debug_types section, and add summary
1443 // information to the .gdb_index section.
1445 template<int size
, bool big_endian
>
1447 Layout::add_to_gdb_index(bool is_type_unit
,
1448 Sized_relobj
<size
, big_endian
>* object
,
1449 const unsigned char* symbols
,
1452 unsigned int reloc_shndx
,
1453 unsigned int reloc_type
)
1455 if (this->gdb_index_data_
== NULL
)
1457 Output_section
* os
= this->choose_output_section(NULL
, ".gdb_index",
1458 elfcpp::SHT_PROGBITS
, 0,
1459 false, ORDER_INVALID
,
1464 this->gdb_index_data_
= new Gdb_index(os
);
1465 os
->add_output_section_data(this->gdb_index_data_
);
1466 os
->set_after_input_sections();
1469 this->gdb_index_data_
->scan_debug_info(is_type_unit
, object
, symbols
,
1470 symbols_size
, shndx
, reloc_shndx
,
1474 // Add POSD to an output section using NAME, TYPE, and FLAGS. Return
1475 // the output section.
1478 Layout::add_output_section_data(const char* name
, elfcpp::Elf_Word type
,
1479 elfcpp::Elf_Xword flags
,
1480 Output_section_data
* posd
,
1481 Output_section_order order
, bool is_relro
)
1483 Output_section
* os
= this->choose_output_section(NULL
, name
, type
, flags
,
1484 false, order
, is_relro
);
1486 os
->add_output_section_data(posd
);
1490 // Map section flags to segment flags.
1493 Layout::section_flags_to_segment(elfcpp::Elf_Xword flags
)
1495 elfcpp::Elf_Word ret
= elfcpp::PF_R
;
1496 if ((flags
& elfcpp::SHF_WRITE
) != 0)
1497 ret
|= elfcpp::PF_W
;
1498 if ((flags
& elfcpp::SHF_EXECINSTR
) != 0)
1499 ret
|= elfcpp::PF_X
;
1503 // Make a new Output_section, and attach it to segments as
1504 // appropriate. ORDER is the order in which this section should
1505 // appear in the output segment. IS_RELRO is true if this is a relro
1506 // (read-only after relocations) section.
1509 Layout::make_output_section(const char* name
, elfcpp::Elf_Word type
,
1510 elfcpp::Elf_Xword flags
,
1511 Output_section_order order
, bool is_relro
)
1514 if ((flags
& elfcpp::SHF_ALLOC
) == 0
1515 && strcmp(parameters
->options().compress_debug_sections(), "none") != 0
1516 && is_compressible_debug_section(name
))
1517 os
= new Output_compressed_section(¶meters
->options(), name
, type
,
1519 else if ((flags
& elfcpp::SHF_ALLOC
) == 0
1520 && parameters
->options().strip_debug_non_line()
1521 && strcmp(".debug_abbrev", name
) == 0)
1523 os
= this->debug_abbrev_
= new Output_reduced_debug_abbrev_section(
1525 if (this->debug_info_
)
1526 this->debug_info_
->set_abbreviations(this->debug_abbrev_
);
1528 else if ((flags
& elfcpp::SHF_ALLOC
) == 0
1529 && parameters
->options().strip_debug_non_line()
1530 && strcmp(".debug_info", name
) == 0)
1532 os
= this->debug_info_
= new Output_reduced_debug_info_section(
1534 if (this->debug_abbrev_
)
1535 this->debug_info_
->set_abbreviations(this->debug_abbrev_
);
1539 // Sometimes .init_array*, .preinit_array* and .fini_array* do
1540 // not have correct section types. Force them here.
1541 if (type
== elfcpp::SHT_PROGBITS
)
1543 if (is_prefix_of(".init_array", name
))
1544 type
= elfcpp::SHT_INIT_ARRAY
;
1545 else if (is_prefix_of(".preinit_array", name
))
1546 type
= elfcpp::SHT_PREINIT_ARRAY
;
1547 else if (is_prefix_of(".fini_array", name
))
1548 type
= elfcpp::SHT_FINI_ARRAY
;
1551 // FIXME: const_cast is ugly.
1552 Target
* target
= const_cast<Target
*>(¶meters
->target());
1553 os
= target
->make_output_section(name
, type
, flags
);
1556 // With -z relro, we have to recognize the special sections by name.
1557 // There is no other way.
1558 bool is_relro_local
= false;
1559 if (!this->script_options_
->saw_sections_clause()
1560 && parameters
->options().relro()
1561 && (flags
& elfcpp::SHF_ALLOC
) != 0
1562 && (flags
& elfcpp::SHF_WRITE
) != 0)
1564 if (type
== elfcpp::SHT_PROGBITS
)
1566 if ((flags
& elfcpp::SHF_TLS
) != 0)
1568 else if (strcmp(name
, ".data.rel.ro") == 0)
1570 else if (strcmp(name
, ".data.rel.ro.local") == 0)
1573 is_relro_local
= true;
1575 else if (strcmp(name
, ".ctors") == 0
1576 || strcmp(name
, ".dtors") == 0
1577 || strcmp(name
, ".jcr") == 0)
1580 else if (type
== elfcpp::SHT_INIT_ARRAY
1581 || type
== elfcpp::SHT_FINI_ARRAY
1582 || type
== elfcpp::SHT_PREINIT_ARRAY
)
1589 if (order
== ORDER_INVALID
&& (flags
& elfcpp::SHF_ALLOC
) != 0)
1590 order
= this->default_section_order(os
, is_relro_local
);
1592 os
->set_order(order
);
1594 parameters
->target().new_output_section(os
);
1596 this->section_list_
.push_back(os
);
1598 // The GNU linker by default sorts some sections by priority, so we
1599 // do the same. We need to know that this might happen before we
1600 // attach any input sections.
1601 if (!this->script_options_
->saw_sections_clause()
1602 && !parameters
->options().relocatable()
1603 && (strcmp(name
, ".init_array") == 0
1604 || strcmp(name
, ".fini_array") == 0
1605 || (!parameters
->options().ctors_in_init_array()
1606 && (strcmp(name
, ".ctors") == 0
1607 || strcmp(name
, ".dtors") == 0))))
1608 os
->set_may_sort_attached_input_sections();
1610 // Check for .stab*str sections, as .stab* sections need to link to
1612 if (type
== elfcpp::SHT_STRTAB
1613 && !this->have_stabstr_section_
1614 && strncmp(name
, ".stab", 5) == 0
1615 && strcmp(name
+ strlen(name
) - 3, "str") == 0)
1616 this->have_stabstr_section_
= true;
1618 // During a full incremental link, we add patch space to most
1619 // PROGBITS and NOBITS sections. Flag those that may be
1620 // arbitrarily padded.
1621 if ((type
== elfcpp::SHT_PROGBITS
|| type
== elfcpp::SHT_NOBITS
)
1622 && order
!= ORDER_INTERP
1623 && order
!= ORDER_INIT
1624 && order
!= ORDER_PLT
1625 && order
!= ORDER_FINI
1626 && order
!= ORDER_RELRO_LAST
1627 && order
!= ORDER_NON_RELRO_FIRST
1628 && strcmp(name
, ".eh_frame") != 0
1629 && strcmp(name
, ".ctors") != 0
1630 && strcmp(name
, ".dtors") != 0
1631 && strcmp(name
, ".jcr") != 0)
1633 os
->set_is_patch_space_allowed();
1635 // Certain sections require "holes" to be filled with
1636 // specific fill patterns. These fill patterns may have
1637 // a minimum size, so we must prevent allocations from the
1638 // free list that leave a hole smaller than the minimum.
1639 if (strcmp(name
, ".debug_info") == 0)
1640 os
->set_free_space_fill(new Output_fill_debug_info(false));
1641 else if (strcmp(name
, ".debug_types") == 0)
1642 os
->set_free_space_fill(new Output_fill_debug_info(true));
1643 else if (strcmp(name
, ".debug_line") == 0)
1644 os
->set_free_space_fill(new Output_fill_debug_line());
1647 // If we have already attached the sections to segments, then we
1648 // need to attach this one now. This happens for sections created
1649 // directly by the linker.
1650 if (this->sections_are_attached_
)
1651 this->attach_section_to_segment(¶meters
->target(), os
);
1656 // Return the default order in which a section should be placed in an
1657 // output segment. This function captures a lot of the ideas in
1658 // ld/scripttempl/elf.sc in the GNU linker. Note that the order of a
1659 // linker created section is normally set when the section is created;
1660 // this function is used for input sections.
1662 Output_section_order
1663 Layout::default_section_order(Output_section
* os
, bool is_relro_local
)
1665 gold_assert((os
->flags() & elfcpp::SHF_ALLOC
) != 0);
1666 bool is_write
= (os
->flags() & elfcpp::SHF_WRITE
) != 0;
1667 bool is_execinstr
= (os
->flags() & elfcpp::SHF_EXECINSTR
) != 0;
1668 bool is_bss
= false;
1673 case elfcpp::SHT_PROGBITS
:
1675 case elfcpp::SHT_NOBITS
:
1678 case elfcpp::SHT_RELA
:
1679 case elfcpp::SHT_REL
:
1681 return ORDER_DYNAMIC_RELOCS
;
1683 case elfcpp::SHT_HASH
:
1684 case elfcpp::SHT_DYNAMIC
:
1685 case elfcpp::SHT_SHLIB
:
1686 case elfcpp::SHT_DYNSYM
:
1687 case elfcpp::SHT_GNU_HASH
:
1688 case elfcpp::SHT_GNU_verdef
:
1689 case elfcpp::SHT_GNU_verneed
:
1690 case elfcpp::SHT_GNU_versym
:
1692 return ORDER_DYNAMIC_LINKER
;
1694 case elfcpp::SHT_NOTE
:
1695 return is_write
? ORDER_RW_NOTE
: ORDER_RO_NOTE
;
1698 if ((os
->flags() & elfcpp::SHF_TLS
) != 0)
1699 return is_bss
? ORDER_TLS_BSS
: ORDER_TLS_DATA
;
1701 if (!is_bss
&& !is_write
)
1705 if (strcmp(os
->name(), ".init") == 0)
1707 else if (strcmp(os
->name(), ".fini") == 0)
1710 return is_execinstr
? ORDER_TEXT
: ORDER_READONLY
;
1714 return is_relro_local
? ORDER_RELRO_LOCAL
: ORDER_RELRO
;
1716 if (os
->is_small_section())
1717 return is_bss
? ORDER_SMALL_BSS
: ORDER_SMALL_DATA
;
1718 if (os
->is_large_section())
1719 return is_bss
? ORDER_LARGE_BSS
: ORDER_LARGE_DATA
;
1721 return is_bss
? ORDER_BSS
: ORDER_DATA
;
1724 // Attach output sections to segments. This is called after we have
1725 // seen all the input sections.
1728 Layout::attach_sections_to_segments(const Target
* target
)
1730 for (Section_list::iterator p
= this->section_list_
.begin();
1731 p
!= this->section_list_
.end();
1733 this->attach_section_to_segment(target
, *p
);
1735 this->sections_are_attached_
= true;
1738 // Attach an output section to a segment.
1741 Layout::attach_section_to_segment(const Target
* target
, Output_section
* os
)
1743 if ((os
->flags() & elfcpp::SHF_ALLOC
) == 0)
1744 this->unattached_section_list_
.push_back(os
);
1746 this->attach_allocated_section_to_segment(target
, os
);
1749 // Attach an allocated output section to a segment.
1752 Layout::attach_allocated_section_to_segment(const Target
* target
,
1755 elfcpp::Elf_Xword flags
= os
->flags();
1756 gold_assert((flags
& elfcpp::SHF_ALLOC
) != 0);
1758 if (parameters
->options().relocatable())
1761 // If we have a SECTIONS clause, we can't handle the attachment to
1762 // segments until after we've seen all the sections.
1763 if (this->script_options_
->saw_sections_clause())
1766 gold_assert(!this->script_options_
->saw_phdrs_clause());
1768 // This output section goes into a PT_LOAD segment.
1770 elfcpp::Elf_Word seg_flags
= Layout::section_flags_to_segment(flags
);
1772 // If this output section's segment has extra flags that need to be set,
1773 // coming from a linker plugin, do that.
1774 seg_flags
|= os
->extra_segment_flags();
1776 // Check for --section-start.
1778 bool is_address_set
= parameters
->options().section_start(os
->name(), &addr
);
1780 // In general the only thing we really care about for PT_LOAD
1781 // segments is whether or not they are writable or executable,
1782 // so that is how we search for them.
1783 // Large data sections also go into their own PT_LOAD segment.
1784 // People who need segments sorted on some other basis will
1785 // have to use a linker script.
1787 Segment_list::const_iterator p
;
1788 if (!os
->is_unique_segment())
1790 for (p
= this->segment_list_
.begin();
1791 p
!= this->segment_list_
.end();
1794 if ((*p
)->type() != elfcpp::PT_LOAD
)
1796 if ((*p
)->is_unique_segment())
1798 if (!parameters
->options().omagic()
1799 && ((*p
)->flags() & elfcpp::PF_W
) != (seg_flags
& elfcpp::PF_W
))
1801 if ((target
->isolate_execinstr() || parameters
->options().rosegment())
1802 && ((*p
)->flags() & elfcpp::PF_X
) != (seg_flags
& elfcpp::PF_X
))
1804 // If -Tbss was specified, we need to separate the data and BSS
1806 if (parameters
->options().user_set_Tbss())
1808 if ((os
->type() == elfcpp::SHT_NOBITS
)
1809 == (*p
)->has_any_data_sections())
1812 if (os
->is_large_data_section() && !(*p
)->is_large_data_segment())
1817 if ((*p
)->are_addresses_set())
1820 (*p
)->add_initial_output_data(os
);
1821 (*p
)->update_flags_for_output_section(seg_flags
);
1822 (*p
)->set_addresses(addr
, addr
);
1826 (*p
)->add_output_section_to_load(this, os
, seg_flags
);
1831 if (p
== this->segment_list_
.end()
1832 || os
->is_unique_segment())
1834 Output_segment
* oseg
= this->make_output_segment(elfcpp::PT_LOAD
,
1836 if (os
->is_large_data_section())
1837 oseg
->set_is_large_data_segment();
1838 oseg
->add_output_section_to_load(this, os
, seg_flags
);
1840 oseg
->set_addresses(addr
, addr
);
1841 // Check if segment should be marked unique. For segments marked
1842 // unique by linker plugins, set the new alignment if specified.
1843 if (os
->is_unique_segment())
1845 oseg
->set_is_unique_segment();
1846 if (os
->segment_alignment() != 0)
1847 oseg
->set_minimum_p_align(os
->segment_alignment());
1851 // If we see a loadable SHT_NOTE section, we create a PT_NOTE
1853 if (os
->type() == elfcpp::SHT_NOTE
)
1855 // See if we already have an equivalent PT_NOTE segment.
1856 for (p
= this->segment_list_
.begin();
1857 p
!= segment_list_
.end();
1860 if ((*p
)->type() == elfcpp::PT_NOTE
1861 && (((*p
)->flags() & elfcpp::PF_W
)
1862 == (seg_flags
& elfcpp::PF_W
)))
1864 (*p
)->add_output_section_to_nonload(os
, seg_flags
);
1869 if (p
== this->segment_list_
.end())
1871 Output_segment
* oseg
= this->make_output_segment(elfcpp::PT_NOTE
,
1873 oseg
->add_output_section_to_nonload(os
, seg_flags
);
1877 // If we see a loadable SHF_TLS section, we create a PT_TLS
1878 // segment. There can only be one such segment.
1879 if ((flags
& elfcpp::SHF_TLS
) != 0)
1881 if (this->tls_segment_
== NULL
)
1882 this->make_output_segment(elfcpp::PT_TLS
, seg_flags
);
1883 this->tls_segment_
->add_output_section_to_nonload(os
, seg_flags
);
1886 // If -z relro is in effect, and we see a relro section, we create a
1887 // PT_GNU_RELRO segment. There can only be one such segment.
1888 if (os
->is_relro() && parameters
->options().relro())
1890 gold_assert(seg_flags
== (elfcpp::PF_R
| elfcpp::PF_W
));
1891 if (this->relro_segment_
== NULL
)
1892 this->make_output_segment(elfcpp::PT_GNU_RELRO
, seg_flags
);
1893 this->relro_segment_
->add_output_section_to_nonload(os
, seg_flags
);
1896 // If we see a section named .interp, put it into a PT_INTERP
1897 // segment. This seems broken to me, but this is what GNU ld does,
1898 // and glibc expects it.
1899 if (strcmp(os
->name(), ".interp") == 0
1900 && !this->script_options_
->saw_phdrs_clause())
1902 if (this->interp_segment_
== NULL
)
1903 this->make_output_segment(elfcpp::PT_INTERP
, seg_flags
);
1905 gold_warning(_("multiple '.interp' sections in input files "
1906 "may cause confusing PT_INTERP segment"));
1907 this->interp_segment_
->add_output_section_to_nonload(os
, seg_flags
);
1911 // Make an output section for a script.
1914 Layout::make_output_section_for_script(
1916 Script_sections::Section_type section_type
)
1918 name
= this->namepool_
.add(name
, false, NULL
);
1919 elfcpp::Elf_Xword sh_flags
= elfcpp::SHF_ALLOC
;
1920 if (section_type
== Script_sections::ST_NOLOAD
)
1922 Output_section
* os
= this->make_output_section(name
, elfcpp::SHT_PROGBITS
,
1923 sh_flags
, ORDER_INVALID
,
1925 os
->set_found_in_sections_clause();
1926 if (section_type
== Script_sections::ST_NOLOAD
)
1927 os
->set_is_noload();
1931 // Return the number of segments we expect to see.
1934 Layout::expected_segment_count() const
1936 size_t ret
= this->segment_list_
.size();
1938 // If we didn't see a SECTIONS clause in a linker script, we should
1939 // already have the complete list of segments. Otherwise we ask the
1940 // SECTIONS clause how many segments it expects, and add in the ones
1941 // we already have (PT_GNU_STACK, PT_GNU_EH_FRAME, etc.)
1943 if (!this->script_options_
->saw_sections_clause())
1947 const Script_sections
* ss
= this->script_options_
->script_sections();
1948 return ret
+ ss
->expected_segment_count(this);
1952 // Handle the .note.GNU-stack section at layout time. SEEN_GNU_STACK
1953 // is whether we saw a .note.GNU-stack section in the object file.
1954 // GNU_STACK_FLAGS is the section flags. The flags give the
1955 // protection required for stack memory. We record this in an
1956 // executable as a PT_GNU_STACK segment. If an object file does not
1957 // have a .note.GNU-stack segment, we must assume that it is an old
1958 // object. On some targets that will force an executable stack.
1961 Layout::layout_gnu_stack(bool seen_gnu_stack
, uint64_t gnu_stack_flags
,
1964 if (!seen_gnu_stack
)
1966 this->input_without_gnu_stack_note_
= true;
1967 if (parameters
->options().warn_execstack()
1968 && parameters
->target().is_default_stack_executable())
1969 gold_warning(_("%s: missing .note.GNU-stack section"
1970 " implies executable stack"),
1971 obj
->name().c_str());
1975 this->input_with_gnu_stack_note_
= true;
1976 if ((gnu_stack_flags
& elfcpp::SHF_EXECINSTR
) != 0)
1978 this->input_requires_executable_stack_
= true;
1979 if (parameters
->options().warn_execstack()
1980 || parameters
->options().is_stack_executable())
1981 gold_warning(_("%s: requires executable stack"),
1982 obj
->name().c_str());
1987 // Create automatic note sections.
1990 Layout::create_notes()
1992 this->create_gold_note();
1993 this->create_executable_stack_info();
1994 this->create_build_id();
1997 // Create the dynamic sections which are needed before we read the
2001 Layout::create_initial_dynamic_sections(Symbol_table
* symtab
)
2003 if (parameters
->doing_static_link())
2006 this->dynamic_section_
= this->choose_output_section(NULL
, ".dynamic",
2007 elfcpp::SHT_DYNAMIC
,
2009 | elfcpp::SHF_WRITE
),
2013 // A linker script may discard .dynamic, so check for NULL.
2014 if (this->dynamic_section_
!= NULL
)
2016 this->dynamic_symbol_
=
2017 symtab
->define_in_output_data("_DYNAMIC", NULL
,
2018 Symbol_table::PREDEFINED
,
2019 this->dynamic_section_
, 0, 0,
2020 elfcpp::STT_OBJECT
, elfcpp::STB_LOCAL
,
2021 elfcpp::STV_HIDDEN
, 0, false, false);
2023 this->dynamic_data_
= new Output_data_dynamic(&this->dynpool_
);
2025 this->dynamic_section_
->add_output_section_data(this->dynamic_data_
);
2029 // For each output section whose name can be represented as C symbol,
2030 // define __start and __stop symbols for the section. This is a GNU
2034 Layout::define_section_symbols(Symbol_table
* symtab
)
2036 for (Section_list::const_iterator p
= this->section_list_
.begin();
2037 p
!= this->section_list_
.end();
2040 const char* const name
= (*p
)->name();
2041 if (is_cident(name
))
2043 const std::string
name_string(name
);
2044 const std::string
start_name(cident_section_start_prefix
2046 const std::string
stop_name(cident_section_stop_prefix
2049 symtab
->define_in_output_data(start_name
.c_str(),
2051 Symbol_table::PREDEFINED
,
2057 elfcpp::STV_DEFAULT
,
2059 false, // offset_is_from_end
2060 true); // only_if_ref
2062 symtab
->define_in_output_data(stop_name
.c_str(),
2064 Symbol_table::PREDEFINED
,
2070 elfcpp::STV_DEFAULT
,
2072 true, // offset_is_from_end
2073 true); // only_if_ref
2078 // Define symbols for group signatures.
2081 Layout::define_group_signatures(Symbol_table
* symtab
)
2083 for (Group_signatures::iterator p
= this->group_signatures_
.begin();
2084 p
!= this->group_signatures_
.end();
2087 Symbol
* sym
= symtab
->lookup(p
->signature
, NULL
);
2089 p
->section
->set_info_symndx(sym
);
2092 // Force the name of the group section to the group
2093 // signature, and use the group's section symbol as the
2094 // signature symbol.
2095 if (strcmp(p
->section
->name(), p
->signature
) != 0)
2097 const char* name
= this->namepool_
.add(p
->signature
,
2099 p
->section
->set_name(name
);
2101 p
->section
->set_needs_symtab_index();
2102 p
->section
->set_info_section_symndx(p
->section
);
2106 this->group_signatures_
.clear();
2109 // Find the first read-only PT_LOAD segment, creating one if
2113 Layout::find_first_load_seg(const Target
* target
)
2115 Output_segment
* best
= NULL
;
2116 for (Segment_list::const_iterator p
= this->segment_list_
.begin();
2117 p
!= this->segment_list_
.end();
2120 if ((*p
)->type() == elfcpp::PT_LOAD
2121 && ((*p
)->flags() & elfcpp::PF_R
) != 0
2122 && (parameters
->options().omagic()
2123 || ((*p
)->flags() & elfcpp::PF_W
) == 0)
2124 && (!target
->isolate_execinstr()
2125 || ((*p
)->flags() & elfcpp::PF_X
) == 0))
2127 if (best
== NULL
|| this->segment_precedes(*p
, best
))
2134 gold_assert(!this->script_options_
->saw_phdrs_clause());
2136 Output_segment
* load_seg
= this->make_output_segment(elfcpp::PT_LOAD
,
2141 // Save states of all current output segments. Store saved states
2142 // in SEGMENT_STATES.
2145 Layout::save_segments(Segment_states
* segment_states
)
2147 for (Segment_list::const_iterator p
= this->segment_list_
.begin();
2148 p
!= this->segment_list_
.end();
2151 Output_segment
* segment
= *p
;
2153 Output_segment
* copy
= new Output_segment(*segment
);
2154 (*segment_states
)[segment
] = copy
;
2158 // Restore states of output segments and delete any segment not found in
2162 Layout::restore_segments(const Segment_states
* segment_states
)
2164 // Go through the segment list and remove any segment added in the
2166 this->tls_segment_
= NULL
;
2167 this->relro_segment_
= NULL
;
2168 Segment_list::iterator list_iter
= this->segment_list_
.begin();
2169 while (list_iter
!= this->segment_list_
.end())
2171 Output_segment
* segment
= *list_iter
;
2172 Segment_states::const_iterator states_iter
=
2173 segment_states
->find(segment
);
2174 if (states_iter
!= segment_states
->end())
2176 const Output_segment
* copy
= states_iter
->second
;
2177 // Shallow copy to restore states.
2180 // Also fix up TLS and RELRO segment pointers as appropriate.
2181 if (segment
->type() == elfcpp::PT_TLS
)
2182 this->tls_segment_
= segment
;
2183 else if (segment
->type() == elfcpp::PT_GNU_RELRO
)
2184 this->relro_segment_
= segment
;
2190 list_iter
= this->segment_list_
.erase(list_iter
);
2191 // This is a segment created during section layout. It should be
2192 // safe to remove it since we should have removed all pointers to it.
2198 // Clean up after relaxation so that sections can be laid out again.
2201 Layout::clean_up_after_relaxation()
2203 // Restore the segments to point state just prior to the relaxation loop.
2204 Script_sections
* script_section
= this->script_options_
->script_sections();
2205 script_section
->release_segments();
2206 this->restore_segments(this->segment_states_
);
2208 // Reset section addresses and file offsets
2209 for (Section_list::iterator p
= this->section_list_
.begin();
2210 p
!= this->section_list_
.end();
2213 (*p
)->restore_states();
2215 // If an input section changes size because of relaxation,
2216 // we need to adjust the section offsets of all input sections.
2217 // after such a section.
2218 if ((*p
)->section_offsets_need_adjustment())
2219 (*p
)->adjust_section_offsets();
2221 (*p
)->reset_address_and_file_offset();
2224 // Reset special output object address and file offsets.
2225 for (Data_list::iterator p
= this->special_output_list_
.begin();
2226 p
!= this->special_output_list_
.end();
2228 (*p
)->reset_address_and_file_offset();
2230 // A linker script may have created some output section data objects.
2231 // They are useless now.
2232 for (Output_section_data_list::const_iterator p
=
2233 this->script_output_section_data_list_
.begin();
2234 p
!= this->script_output_section_data_list_
.end();
2237 this->script_output_section_data_list_
.clear();
2240 // Prepare for relaxation.
2243 Layout::prepare_for_relaxation()
2245 // Create an relaxation debug check if in debugging mode.
2246 if (is_debugging_enabled(DEBUG_RELAXATION
))
2247 this->relaxation_debug_check_
= new Relaxation_debug_check();
2249 // Save segment states.
2250 this->segment_states_
= new Segment_states();
2251 this->save_segments(this->segment_states_
);
2253 for(Section_list::const_iterator p
= this->section_list_
.begin();
2254 p
!= this->section_list_
.end();
2256 (*p
)->save_states();
2258 if (is_debugging_enabled(DEBUG_RELAXATION
))
2259 this->relaxation_debug_check_
->check_output_data_for_reset_values(
2260 this->section_list_
, this->special_output_list_
);
2262 // Also enable recording of output section data from scripts.
2263 this->record_output_section_data_from_script_
= true;
2266 // Relaxation loop body: If target has no relaxation, this runs only once
2267 // Otherwise, the target relaxation hook is called at the end of
2268 // each iteration. If the hook returns true, it means re-layout of
2269 // section is required.
2271 // The number of segments created by a linking script without a PHDRS
2272 // clause may be affected by section sizes and alignments. There is
2273 // a remote chance that relaxation causes different number of PT_LOAD
2274 // segments are created and sections are attached to different segments.
2275 // Therefore, we always throw away all segments created during section
2276 // layout. In order to be able to restart the section layout, we keep
2277 // a copy of the segment list right before the relaxation loop and use
2278 // that to restore the segments.
2280 // PASS is the current relaxation pass number.
2281 // SYMTAB is a symbol table.
2282 // PLOAD_SEG is the address of a pointer for the load segment.
2283 // PHDR_SEG is a pointer to the PHDR segment.
2284 // SEGMENT_HEADERS points to the output segment header.
2285 // FILE_HEADER points to the output file header.
2286 // PSHNDX is the address to store the output section index.
2289 Layout::relaxation_loop_body(
2292 Symbol_table
* symtab
,
2293 Output_segment
** pload_seg
,
2294 Output_segment
* phdr_seg
,
2295 Output_segment_headers
* segment_headers
,
2296 Output_file_header
* file_header
,
2297 unsigned int* pshndx
)
2299 // If this is not the first iteration, we need to clean up after
2300 // relaxation so that we can lay out the sections again.
2302 this->clean_up_after_relaxation();
2304 // If there is a SECTIONS clause, put all the input sections into
2305 // the required order.
2306 Output_segment
* load_seg
;
2307 if (this->script_options_
->saw_sections_clause())
2308 load_seg
= this->set_section_addresses_from_script(symtab
);
2309 else if (parameters
->options().relocatable())
2312 load_seg
= this->find_first_load_seg(target
);
2314 if (parameters
->options().oformat_enum()
2315 != General_options::OBJECT_FORMAT_ELF
)
2318 // If the user set the address of the text segment, that may not be
2319 // compatible with putting the segment headers and file headers into
2321 if (parameters
->options().user_set_Ttext()
2322 && parameters
->options().Ttext() % target
->abi_pagesize() != 0)
2328 gold_assert(phdr_seg
== NULL
2330 || this->script_options_
->saw_sections_clause());
2332 // If the address of the load segment we found has been set by
2333 // --section-start rather than by a script, then adjust the VMA and
2334 // LMA downward if possible to include the file and section headers.
2335 uint64_t header_gap
= 0;
2336 if (load_seg
!= NULL
2337 && load_seg
->are_addresses_set()
2338 && !this->script_options_
->saw_sections_clause()
2339 && !parameters
->options().relocatable())
2341 file_header
->finalize_data_size();
2342 segment_headers
->finalize_data_size();
2343 size_t sizeof_headers
= (file_header
->data_size()
2344 + segment_headers
->data_size());
2345 const uint64_t abi_pagesize
= target
->abi_pagesize();
2346 uint64_t hdr_paddr
= load_seg
->paddr() - sizeof_headers
;
2347 hdr_paddr
&= ~(abi_pagesize
- 1);
2348 uint64_t subtract
= load_seg
->paddr() - hdr_paddr
;
2349 if (load_seg
->paddr() < subtract
|| load_seg
->vaddr() < subtract
)
2353 load_seg
->set_addresses(load_seg
->vaddr() - subtract
,
2354 load_seg
->paddr() - subtract
);
2355 header_gap
= subtract
- sizeof_headers
;
2359 // Lay out the segment headers.
2360 if (!parameters
->options().relocatable())
2362 gold_assert(segment_headers
!= NULL
);
2363 if (header_gap
!= 0 && load_seg
!= NULL
)
2365 Output_data_zero_fill
* z
= new Output_data_zero_fill(header_gap
, 1);
2366 load_seg
->add_initial_output_data(z
);
2368 if (load_seg
!= NULL
)
2369 load_seg
->add_initial_output_data(segment_headers
);
2370 if (phdr_seg
!= NULL
)
2371 phdr_seg
->add_initial_output_data(segment_headers
);
2374 // Lay out the file header.
2375 if (load_seg
!= NULL
)
2376 load_seg
->add_initial_output_data(file_header
);
2378 if (this->script_options_
->saw_phdrs_clause()
2379 && !parameters
->options().relocatable())
2381 // Support use of FILEHDRS and PHDRS attachments in a PHDRS
2382 // clause in a linker script.
2383 Script_sections
* ss
= this->script_options_
->script_sections();
2384 ss
->put_headers_in_phdrs(file_header
, segment_headers
);
2387 // We set the output section indexes in set_segment_offsets and
2388 // set_section_indexes.
2391 // Set the file offsets of all the segments, and all the sections
2394 if (!parameters
->options().relocatable())
2395 off
= this->set_segment_offsets(target
, load_seg
, pshndx
);
2397 off
= this->set_relocatable_section_offsets(file_header
, pshndx
);
2399 // Verify that the dummy relaxation does not change anything.
2400 if (is_debugging_enabled(DEBUG_RELAXATION
))
2403 this->relaxation_debug_check_
->read_sections(this->section_list_
);
2405 this->relaxation_debug_check_
->verify_sections(this->section_list_
);
2408 *pload_seg
= load_seg
;
2412 // Search the list of patterns and find the postion of the given section
2413 // name in the output section. If the section name matches a glob
2414 // pattern and a non-glob name, then the non-glob position takes
2415 // precedence. Return 0 if no match is found.
2418 Layout::find_section_order_index(const std::string
& section_name
)
2420 Unordered_map
<std::string
, unsigned int>::iterator map_it
;
2421 map_it
= this->input_section_position_
.find(section_name
);
2422 if (map_it
!= this->input_section_position_
.end())
2423 return map_it
->second
;
2425 // Absolute match failed. Linear search the glob patterns.
2426 std::vector
<std::string
>::iterator it
;
2427 for (it
= this->input_section_glob_
.begin();
2428 it
!= this->input_section_glob_
.end();
2431 if (fnmatch((*it
).c_str(), section_name
.c_str(), FNM_NOESCAPE
) == 0)
2433 map_it
= this->input_section_position_
.find(*it
);
2434 gold_assert(map_it
!= this->input_section_position_
.end());
2435 return map_it
->second
;
2441 // Read the sequence of input sections from the file specified with
2442 // option --section-ordering-file.
2445 Layout::read_layout_from_file()
2447 const char* filename
= parameters
->options().section_ordering_file();
2453 gold_fatal(_("unable to open --section-ordering-file file %s: %s"),
2454 filename
, strerror(errno
));
2456 std::getline(in
, line
); // this chops off the trailing \n, if any
2457 unsigned int position
= 1;
2458 this->set_section_ordering_specified();
2462 if (!line
.empty() && line
[line
.length() - 1] == '\r') // Windows
2463 line
.resize(line
.length() - 1);
2464 // Ignore comments, beginning with '#'
2467 std::getline(in
, line
);
2470 this->input_section_position_
[line
] = position
;
2471 // Store all glob patterns in a vector.
2472 if (is_wildcard_string(line
.c_str()))
2473 this->input_section_glob_
.push_back(line
);
2475 std::getline(in
, line
);
2479 // Finalize the layout. When this is called, we have created all the
2480 // output sections and all the output segments which are based on
2481 // input sections. We have several things to do, and we have to do
2482 // them in the right order, so that we get the right results correctly
2485 // 1) Finalize the list of output segments and create the segment
2488 // 2) Finalize the dynamic symbol table and associated sections.
2490 // 3) Determine the final file offset of all the output segments.
2492 // 4) Determine the final file offset of all the SHF_ALLOC output
2495 // 5) Create the symbol table sections and the section name table
2498 // 6) Finalize the symbol table: set symbol values to their final
2499 // value and make a final determination of which symbols are going
2500 // into the output symbol table.
2502 // 7) Create the section table header.
2504 // 8) Determine the final file offset of all the output sections which
2505 // are not SHF_ALLOC, including the section table header.
2507 // 9) Finalize the ELF file header.
2509 // This function returns the size of the output file.
2512 Layout::finalize(const Input_objects
* input_objects
, Symbol_table
* symtab
,
2513 Target
* target
, const Task
* task
)
2515 target
->finalize_sections(this, input_objects
, symtab
);
2517 this->count_local_symbols(task
, input_objects
);
2519 this->link_stabs_sections();
2521 Output_segment
* phdr_seg
= NULL
;
2522 if (!parameters
->options().relocatable() && !parameters
->doing_static_link())
2524 // There was a dynamic object in the link. We need to create
2525 // some information for the dynamic linker.
2527 // Create the PT_PHDR segment which will hold the program
2529 if (!this->script_options_
->saw_phdrs_clause())
2530 phdr_seg
= this->make_output_segment(elfcpp::PT_PHDR
, elfcpp::PF_R
);
2532 // Create the dynamic symbol table, including the hash table.
2533 Output_section
* dynstr
;
2534 std::vector
<Symbol
*> dynamic_symbols
;
2535 unsigned int local_dynamic_count
;
2536 Versions
versions(*this->script_options()->version_script_info(),
2538 this->create_dynamic_symtab(input_objects
, symtab
, &dynstr
,
2539 &local_dynamic_count
, &dynamic_symbols
,
2542 // Create the .interp section to hold the name of the
2543 // interpreter, and put it in a PT_INTERP segment. Don't do it
2544 // if we saw a .interp section in an input file.
2545 if ((!parameters
->options().shared()
2546 || parameters
->options().dynamic_linker() != NULL
)
2547 && this->interp_segment_
== NULL
)
2548 this->create_interp(target
);
2550 // Finish the .dynamic section to hold the dynamic data, and put
2551 // it in a PT_DYNAMIC segment.
2552 this->finish_dynamic_section(input_objects
, symtab
);
2554 // We should have added everything we need to the dynamic string
2556 this->dynpool_
.set_string_offsets();
2558 // Create the version sections. We can't do this until the
2559 // dynamic string table is complete.
2560 this->create_version_sections(&versions
, symtab
, local_dynamic_count
,
2561 dynamic_symbols
, dynstr
);
2563 // Set the size of the _DYNAMIC symbol. We can't do this until
2564 // after we call create_version_sections.
2565 this->set_dynamic_symbol_size(symtab
);
2568 // Create segment headers.
2569 Output_segment_headers
* segment_headers
=
2570 (parameters
->options().relocatable()
2572 : new Output_segment_headers(this->segment_list_
));
2574 // Lay out the file header.
2575 Output_file_header
* file_header
= new Output_file_header(target
, symtab
,
2578 this->special_output_list_
.push_back(file_header
);
2579 if (segment_headers
!= NULL
)
2580 this->special_output_list_
.push_back(segment_headers
);
2582 // Find approriate places for orphan output sections if we are using
2584 if (this->script_options_
->saw_sections_clause())
2585 this->place_orphan_sections_in_script();
2587 Output_segment
* load_seg
;
2592 // Take a snapshot of the section layout as needed.
2593 if (target
->may_relax())
2594 this->prepare_for_relaxation();
2596 // Run the relaxation loop to lay out sections.
2599 off
= this->relaxation_loop_body(pass
, target
, symtab
, &load_seg
,
2600 phdr_seg
, segment_headers
, file_header
,
2604 while (target
->may_relax()
2605 && target
->relax(pass
, input_objects
, symtab
, this, task
));
2607 // If there is a load segment that contains the file and program headers,
2608 // provide a symbol __ehdr_start pointing there.
2609 // A program can use this to examine itself robustly.
2610 if (load_seg
!= NULL
)
2611 symtab
->define_in_output_segment("__ehdr_start", NULL
,
2612 Symbol_table::PREDEFINED
, load_seg
, 0, 0,
2613 elfcpp::STT_NOTYPE
, elfcpp::STB_GLOBAL
,
2614 elfcpp::STV_DEFAULT
, 0,
2615 Symbol::SEGMENT_START
, true);
2617 // Set the file offsets of all the non-data sections we've seen so
2618 // far which don't have to wait for the input sections. We need
2619 // this in order to finalize local symbols in non-allocated
2621 off
= this->set_section_offsets(off
, BEFORE_INPUT_SECTIONS_PASS
);
2623 // Set the section indexes of all unallocated sections seen so far,
2624 // in case any of them are somehow referenced by a symbol.
2625 shndx
= this->set_section_indexes(shndx
);
2627 // Create the symbol table sections.
2628 this->create_symtab_sections(input_objects
, symtab
, shndx
, &off
);
2629 if (!parameters
->doing_static_link())
2630 this->assign_local_dynsym_offsets(input_objects
);
2632 // Process any symbol assignments from a linker script. This must
2633 // be called after the symbol table has been finalized.
2634 this->script_options_
->finalize_symbols(symtab
, this);
2636 // Create the incremental inputs sections.
2637 if (this->incremental_inputs_
)
2639 this->incremental_inputs_
->finalize();
2640 this->create_incremental_info_sections(symtab
);
2643 // Create the .shstrtab section.
2644 Output_section
* shstrtab_section
= this->create_shstrtab();
2646 // Set the file offsets of the rest of the non-data sections which
2647 // don't have to wait for the input sections.
2648 off
= this->set_section_offsets(off
, BEFORE_INPUT_SECTIONS_PASS
);
2650 // Now that all sections have been created, set the section indexes
2651 // for any sections which haven't been done yet.
2652 shndx
= this->set_section_indexes(shndx
);
2654 // Create the section table header.
2655 this->create_shdrs(shstrtab_section
, &off
);
2657 // If there are no sections which require postprocessing, we can
2658 // handle the section names now, and avoid a resize later.
2659 if (!this->any_postprocessing_sections_
)
2661 off
= this->set_section_offsets(off
,
2662 POSTPROCESSING_SECTIONS_PASS
);
2664 this->set_section_offsets(off
,
2665 STRTAB_AFTER_POSTPROCESSING_SECTIONS_PASS
);
2668 file_header
->set_section_info(this->section_headers_
, shstrtab_section
);
2670 // Now we know exactly where everything goes in the output file
2671 // (except for non-allocated sections which require postprocessing).
2672 Output_data::layout_complete();
2674 this->output_file_size_
= off
;
2679 // Create a note header following the format defined in the ELF ABI.
2680 // NAME is the name, NOTE_TYPE is the type, SECTION_NAME is the name
2681 // of the section to create, DESCSZ is the size of the descriptor.
2682 // ALLOCATE is true if the section should be allocated in memory.
2683 // This returns the new note section. It sets *TRAILING_PADDING to
2684 // the number of trailing zero bytes required.
2687 Layout::create_note(const char* name
, int note_type
,
2688 const char* section_name
, size_t descsz
,
2689 bool allocate
, size_t* trailing_padding
)
2691 // Authorities all agree that the values in a .note field should
2692 // be aligned on 4-byte boundaries for 32-bit binaries. However,
2693 // they differ on what the alignment is for 64-bit binaries.
2694 // The GABI says unambiguously they take 8-byte alignment:
2695 // http://sco.com/developers/gabi/latest/ch5.pheader.html#note_section
2696 // Other documentation says alignment should always be 4 bytes:
2697 // http://www.netbsd.org/docs/kernel/elf-notes.html#note-format
2698 // GNU ld and GNU readelf both support the latter (at least as of
2699 // version 2.16.91), and glibc always generates the latter for
2700 // .note.ABI-tag (as of version 1.6), so that's the one we go with
2702 #ifdef GABI_FORMAT_FOR_DOTNOTE_SECTION // This is not defined by default.
2703 const int size
= parameters
->target().get_size();
2705 const int size
= 32;
2708 // The contents of the .note section.
2709 size_t namesz
= strlen(name
) + 1;
2710 size_t aligned_namesz
= align_address(namesz
, size
/ 8);
2711 size_t aligned_descsz
= align_address(descsz
, size
/ 8);
2713 size_t notehdrsz
= 3 * (size
/ 8) + aligned_namesz
;
2715 unsigned char* buffer
= new unsigned char[notehdrsz
];
2716 memset(buffer
, 0, notehdrsz
);
2718 bool is_big_endian
= parameters
->target().is_big_endian();
2724 elfcpp::Swap
<32, false>::writeval(buffer
, namesz
);
2725 elfcpp::Swap
<32, false>::writeval(buffer
+ 4, descsz
);
2726 elfcpp::Swap
<32, false>::writeval(buffer
+ 8, note_type
);
2730 elfcpp::Swap
<32, true>::writeval(buffer
, namesz
);
2731 elfcpp::Swap
<32, true>::writeval(buffer
+ 4, descsz
);
2732 elfcpp::Swap
<32, true>::writeval(buffer
+ 8, note_type
);
2735 else if (size
== 64)
2739 elfcpp::Swap
<64, false>::writeval(buffer
, namesz
);
2740 elfcpp::Swap
<64, false>::writeval(buffer
+ 8, descsz
);
2741 elfcpp::Swap
<64, false>::writeval(buffer
+ 16, note_type
);
2745 elfcpp::Swap
<64, true>::writeval(buffer
, namesz
);
2746 elfcpp::Swap
<64, true>::writeval(buffer
+ 8, descsz
);
2747 elfcpp::Swap
<64, true>::writeval(buffer
+ 16, note_type
);
2753 memcpy(buffer
+ 3 * (size
/ 8), name
, namesz
);
2755 elfcpp::Elf_Xword flags
= 0;
2756 Output_section_order order
= ORDER_INVALID
;
2759 flags
= elfcpp::SHF_ALLOC
;
2760 order
= ORDER_RO_NOTE
;
2762 Output_section
* os
= this->choose_output_section(NULL
, section_name
,
2764 flags
, false, order
, false);
2768 Output_section_data
* posd
= new Output_data_const_buffer(buffer
, notehdrsz
,
2771 os
->add_output_section_data(posd
);
2773 *trailing_padding
= aligned_descsz
- descsz
;
2778 // For an executable or shared library, create a note to record the
2779 // version of gold used to create the binary.
2782 Layout::create_gold_note()
2784 if (parameters
->options().relocatable()
2785 || parameters
->incremental_update())
2788 std::string desc
= std::string("gold ") + gold::get_version_string();
2790 size_t trailing_padding
;
2791 Output_section
* os
= this->create_note("GNU", elfcpp::NT_GNU_GOLD_VERSION
,
2792 ".note.gnu.gold-version", desc
.size(),
2793 false, &trailing_padding
);
2797 Output_section_data
* posd
= new Output_data_const(desc
, 4);
2798 os
->add_output_section_data(posd
);
2800 if (trailing_padding
> 0)
2802 posd
= new Output_data_zero_fill(trailing_padding
, 0);
2803 os
->add_output_section_data(posd
);
2807 // Record whether the stack should be executable. This can be set
2808 // from the command line using the -z execstack or -z noexecstack
2809 // options. Otherwise, if any input file has a .note.GNU-stack
2810 // section with the SHF_EXECINSTR flag set, the stack should be
2811 // executable. Otherwise, if at least one input file a
2812 // .note.GNU-stack section, and some input file has no .note.GNU-stack
2813 // section, we use the target default for whether the stack should be
2814 // executable. Otherwise, we don't generate a stack note. When
2815 // generating a object file, we create a .note.GNU-stack section with
2816 // the appropriate marking. When generating an executable or shared
2817 // library, we create a PT_GNU_STACK segment.
2820 Layout::create_executable_stack_info()
2822 bool is_stack_executable
;
2823 if (parameters
->options().is_execstack_set())
2824 is_stack_executable
= parameters
->options().is_stack_executable();
2825 else if (!this->input_with_gnu_stack_note_
)
2829 if (this->input_requires_executable_stack_
)
2830 is_stack_executable
= true;
2831 else if (this->input_without_gnu_stack_note_
)
2832 is_stack_executable
=
2833 parameters
->target().is_default_stack_executable();
2835 is_stack_executable
= false;
2838 if (parameters
->options().relocatable())
2840 const char* name
= this->namepool_
.add(".note.GNU-stack", false, NULL
);
2841 elfcpp::Elf_Xword flags
= 0;
2842 if (is_stack_executable
)
2843 flags
|= elfcpp::SHF_EXECINSTR
;
2844 this->make_output_section(name
, elfcpp::SHT_PROGBITS
, flags
,
2845 ORDER_INVALID
, false);
2849 if (this->script_options_
->saw_phdrs_clause())
2851 int flags
= elfcpp::PF_R
| elfcpp::PF_W
;
2852 if (is_stack_executable
)
2853 flags
|= elfcpp::PF_X
;
2854 this->make_output_segment(elfcpp::PT_GNU_STACK
, flags
);
2858 // If --build-id was used, set up the build ID note.
2861 Layout::create_build_id()
2863 if (!parameters
->options().user_set_build_id())
2866 const char* style
= parameters
->options().build_id();
2867 if (strcmp(style
, "none") == 0)
2870 // Set DESCSZ to the size of the note descriptor. When possible,
2871 // set DESC to the note descriptor contents.
2874 if (strcmp(style
, "md5") == 0)
2876 else if (strcmp(style
, "sha1") == 0)
2878 else if (strcmp(style
, "uuid") == 0)
2880 const size_t uuidsz
= 128 / 8;
2882 char buffer
[uuidsz
];
2883 memset(buffer
, 0, uuidsz
);
2885 int descriptor
= open_descriptor(-1, "/dev/urandom", O_RDONLY
);
2887 gold_error(_("--build-id=uuid failed: could not open /dev/urandom: %s"),
2891 ssize_t got
= ::read(descriptor
, buffer
, uuidsz
);
2892 release_descriptor(descriptor
, true);
2894 gold_error(_("/dev/urandom: read failed: %s"), strerror(errno
));
2895 else if (static_cast<size_t>(got
) != uuidsz
)
2896 gold_error(_("/dev/urandom: expected %zu bytes, got %zd bytes"),
2900 desc
.assign(buffer
, uuidsz
);
2903 else if (strncmp(style
, "0x", 2) == 0)
2906 const char* p
= style
+ 2;
2909 if (hex_p(p
[0]) && hex_p(p
[1]))
2911 char c
= (hex_value(p
[0]) << 4) | hex_value(p
[1]);
2915 else if (*p
== '-' || *p
== ':')
2918 gold_fatal(_("--build-id argument '%s' not a valid hex number"),
2921 descsz
= desc
.size();
2924 gold_fatal(_("unrecognized --build-id argument '%s'"), style
);
2927 size_t trailing_padding
;
2928 Output_section
* os
= this->create_note("GNU", elfcpp::NT_GNU_BUILD_ID
,
2929 ".note.gnu.build-id", descsz
, true,
2936 // We know the value already, so we fill it in now.
2937 gold_assert(desc
.size() == descsz
);
2939 Output_section_data
* posd
= new Output_data_const(desc
, 4);
2940 os
->add_output_section_data(posd
);
2942 if (trailing_padding
!= 0)
2944 posd
= new Output_data_zero_fill(trailing_padding
, 0);
2945 os
->add_output_section_data(posd
);
2950 // We need to compute a checksum after we have completed the
2952 gold_assert(trailing_padding
== 0);
2953 this->build_id_note_
= new Output_data_zero_fill(descsz
, 4);
2954 os
->add_output_section_data(this->build_id_note_
);
2958 // If we have both .stabXX and .stabXXstr sections, then the sh_link
2959 // field of the former should point to the latter. I'm not sure who
2960 // started this, but the GNU linker does it, and some tools depend
2964 Layout::link_stabs_sections()
2966 if (!this->have_stabstr_section_
)
2969 for (Section_list::iterator p
= this->section_list_
.begin();
2970 p
!= this->section_list_
.end();
2973 if ((*p
)->type() != elfcpp::SHT_STRTAB
)
2976 const char* name
= (*p
)->name();
2977 if (strncmp(name
, ".stab", 5) != 0)
2980 size_t len
= strlen(name
);
2981 if (strcmp(name
+ len
- 3, "str") != 0)
2984 std::string
stab_name(name
, len
- 3);
2985 Output_section
* stab_sec
;
2986 stab_sec
= this->find_output_section(stab_name
.c_str());
2987 if (stab_sec
!= NULL
)
2988 stab_sec
->set_link_section(*p
);
2992 // Create .gnu_incremental_inputs and related sections needed
2993 // for the next run of incremental linking to check what has changed.
2996 Layout::create_incremental_info_sections(Symbol_table
* symtab
)
2998 Incremental_inputs
* incr
= this->incremental_inputs_
;
3000 gold_assert(incr
!= NULL
);
3002 // Create the .gnu_incremental_inputs, _symtab, and _relocs input sections.
3003 incr
->create_data_sections(symtab
);
3005 // Add the .gnu_incremental_inputs section.
3006 const char* incremental_inputs_name
=
3007 this->namepool_
.add(".gnu_incremental_inputs", false, NULL
);
3008 Output_section
* incremental_inputs_os
=
3009 this->make_output_section(incremental_inputs_name
,
3010 elfcpp::SHT_GNU_INCREMENTAL_INPUTS
, 0,
3011 ORDER_INVALID
, false);
3012 incremental_inputs_os
->add_output_section_data(incr
->inputs_section());
3014 // Add the .gnu_incremental_symtab section.
3015 const char* incremental_symtab_name
=
3016 this->namepool_
.add(".gnu_incremental_symtab", false, NULL
);
3017 Output_section
* incremental_symtab_os
=
3018 this->make_output_section(incremental_symtab_name
,
3019 elfcpp::SHT_GNU_INCREMENTAL_SYMTAB
, 0,
3020 ORDER_INVALID
, false);
3021 incremental_symtab_os
->add_output_section_data(incr
->symtab_section());
3022 incremental_symtab_os
->set_entsize(4);
3024 // Add the .gnu_incremental_relocs section.
3025 const char* incremental_relocs_name
=
3026 this->namepool_
.add(".gnu_incremental_relocs", false, NULL
);
3027 Output_section
* incremental_relocs_os
=
3028 this->make_output_section(incremental_relocs_name
,
3029 elfcpp::SHT_GNU_INCREMENTAL_RELOCS
, 0,
3030 ORDER_INVALID
, false);
3031 incremental_relocs_os
->add_output_section_data(incr
->relocs_section());
3032 incremental_relocs_os
->set_entsize(incr
->relocs_entsize());
3034 // Add the .gnu_incremental_got_plt section.
3035 const char* incremental_got_plt_name
=
3036 this->namepool_
.add(".gnu_incremental_got_plt", false, NULL
);
3037 Output_section
* incremental_got_plt_os
=
3038 this->make_output_section(incremental_got_plt_name
,
3039 elfcpp::SHT_GNU_INCREMENTAL_GOT_PLT
, 0,
3040 ORDER_INVALID
, false);
3041 incremental_got_plt_os
->add_output_section_data(incr
->got_plt_section());
3043 // Add the .gnu_incremental_strtab section.
3044 const char* incremental_strtab_name
=
3045 this->namepool_
.add(".gnu_incremental_strtab", false, NULL
);
3046 Output_section
* incremental_strtab_os
= this->make_output_section(incremental_strtab_name
,
3047 elfcpp::SHT_STRTAB
, 0,
3048 ORDER_INVALID
, false);
3049 Output_data_strtab
* strtab_data
=
3050 new Output_data_strtab(incr
->get_stringpool());
3051 incremental_strtab_os
->add_output_section_data(strtab_data
);
3053 incremental_inputs_os
->set_after_input_sections();
3054 incremental_symtab_os
->set_after_input_sections();
3055 incremental_relocs_os
->set_after_input_sections();
3056 incremental_got_plt_os
->set_after_input_sections();
3058 incremental_inputs_os
->set_link_section(incremental_strtab_os
);
3059 incremental_symtab_os
->set_link_section(incremental_inputs_os
);
3060 incremental_relocs_os
->set_link_section(incremental_inputs_os
);
3061 incremental_got_plt_os
->set_link_section(incremental_inputs_os
);
3064 // Return whether SEG1 should be before SEG2 in the output file. This
3065 // is based entirely on the segment type and flags. When this is
3066 // called the segment addresses have normally not yet been set.
3069 Layout::segment_precedes(const Output_segment
* seg1
,
3070 const Output_segment
* seg2
)
3072 elfcpp::Elf_Word type1
= seg1
->type();
3073 elfcpp::Elf_Word type2
= seg2
->type();
3075 // The single PT_PHDR segment is required to precede any loadable
3076 // segment. We simply make it always first.
3077 if (type1
== elfcpp::PT_PHDR
)
3079 gold_assert(type2
!= elfcpp::PT_PHDR
);
3082 if (type2
== elfcpp::PT_PHDR
)
3085 // The single PT_INTERP segment is required to precede any loadable
3086 // segment. We simply make it always second.
3087 if (type1
== elfcpp::PT_INTERP
)
3089 gold_assert(type2
!= elfcpp::PT_INTERP
);
3092 if (type2
== elfcpp::PT_INTERP
)
3095 // We then put PT_LOAD segments before any other segments.
3096 if (type1
== elfcpp::PT_LOAD
&& type2
!= elfcpp::PT_LOAD
)
3098 if (type2
== elfcpp::PT_LOAD
&& type1
!= elfcpp::PT_LOAD
)
3101 // We put the PT_TLS segment last except for the PT_GNU_RELRO
3102 // segment, because that is where the dynamic linker expects to find
3103 // it (this is just for efficiency; other positions would also work
3105 if (type1
== elfcpp::PT_TLS
3106 && type2
!= elfcpp::PT_TLS
3107 && type2
!= elfcpp::PT_GNU_RELRO
)
3109 if (type2
== elfcpp::PT_TLS
3110 && type1
!= elfcpp::PT_TLS
3111 && type1
!= elfcpp::PT_GNU_RELRO
)
3114 // We put the PT_GNU_RELRO segment last, because that is where the
3115 // dynamic linker expects to find it (as with PT_TLS, this is just
3117 if (type1
== elfcpp::PT_GNU_RELRO
&& type2
!= elfcpp::PT_GNU_RELRO
)
3119 if (type2
== elfcpp::PT_GNU_RELRO
&& type1
!= elfcpp::PT_GNU_RELRO
)
3122 const elfcpp::Elf_Word flags1
= seg1
->flags();
3123 const elfcpp::Elf_Word flags2
= seg2
->flags();
3125 // The order of non-PT_LOAD segments is unimportant. We simply sort
3126 // by the numeric segment type and flags values. There should not
3127 // be more than one segment with the same type and flags.
3128 if (type1
!= elfcpp::PT_LOAD
)
3131 return type1
< type2
;
3132 gold_assert(flags1
!= flags2
);
3133 return flags1
< flags2
;
3136 // If the addresses are set already, sort by load address.
3137 if (seg1
->are_addresses_set())
3139 if (!seg2
->are_addresses_set())
3142 unsigned int section_count1
= seg1
->output_section_count();
3143 unsigned int section_count2
= seg2
->output_section_count();
3144 if (section_count1
== 0 && section_count2
> 0)
3146 if (section_count1
> 0 && section_count2
== 0)
3149 uint64_t paddr1
= (seg1
->are_addresses_set()
3151 : seg1
->first_section_load_address());
3152 uint64_t paddr2
= (seg2
->are_addresses_set()
3154 : seg2
->first_section_load_address());
3156 if (paddr1
!= paddr2
)
3157 return paddr1
< paddr2
;
3159 else if (seg2
->are_addresses_set())
3162 // A segment which holds large data comes after a segment which does
3163 // not hold large data.
3164 if (seg1
->is_large_data_segment())
3166 if (!seg2
->is_large_data_segment())
3169 else if (seg2
->is_large_data_segment())
3172 // Otherwise, we sort PT_LOAD segments based on the flags. Readonly
3173 // segments come before writable segments. Then writable segments
3174 // with data come before writable segments without data. Then
3175 // executable segments come before non-executable segments. Then
3176 // the unlikely case of a non-readable segment comes before the
3177 // normal case of a readable segment. If there are multiple
3178 // segments with the same type and flags, we require that the
3179 // address be set, and we sort by virtual address and then physical
3181 if ((flags1
& elfcpp::PF_W
) != (flags2
& elfcpp::PF_W
))
3182 return (flags1
& elfcpp::PF_W
) == 0;
3183 if ((flags1
& elfcpp::PF_W
) != 0
3184 && seg1
->has_any_data_sections() != seg2
->has_any_data_sections())
3185 return seg1
->has_any_data_sections();
3186 if ((flags1
& elfcpp::PF_X
) != (flags2
& elfcpp::PF_X
))
3187 return (flags1
& elfcpp::PF_X
) != 0;
3188 if ((flags1
& elfcpp::PF_R
) != (flags2
& elfcpp::PF_R
))
3189 return (flags1
& elfcpp::PF_R
) == 0;
3191 // We shouldn't get here--we shouldn't create segments which we
3192 // can't distinguish. Unless of course we are using a weird linker
3193 // script or overlapping --section-start options. We could also get
3194 // here if plugins want unique segments for subsets of sections.
3195 gold_assert(this->script_options_
->saw_phdrs_clause()
3196 || parameters
->options().any_section_start()
3197 || this->is_unique_segment_for_sections_specified());
3201 // Increase OFF so that it is congruent to ADDR modulo ABI_PAGESIZE.
3204 align_file_offset(off_t off
, uint64_t addr
, uint64_t abi_pagesize
)
3206 uint64_t unsigned_off
= off
;
3207 uint64_t aligned_off
= ((unsigned_off
& ~(abi_pagesize
- 1))
3208 | (addr
& (abi_pagesize
- 1)));
3209 if (aligned_off
< unsigned_off
)
3210 aligned_off
+= abi_pagesize
;
3214 // Set the file offsets of all the segments, and all the sections they
3215 // contain. They have all been created. LOAD_SEG must be be laid out
3216 // first. Return the offset of the data to follow.
3219 Layout::set_segment_offsets(const Target
* target
, Output_segment
* load_seg
,
3220 unsigned int* pshndx
)
3222 // Sort them into the final order. We use a stable sort so that we
3223 // don't randomize the order of indistinguishable segments created
3224 // by linker scripts.
3225 std::stable_sort(this->segment_list_
.begin(), this->segment_list_
.end(),
3226 Layout::Compare_segments(this));
3228 // Find the PT_LOAD segments, and set their addresses and offsets
3229 // and their section's addresses and offsets.
3230 uint64_t start_addr
;
3231 if (parameters
->options().user_set_Ttext())
3232 start_addr
= parameters
->options().Ttext();
3233 else if (parameters
->options().output_is_position_independent())
3236 start_addr
= target
->default_text_segment_address();
3238 uint64_t addr
= start_addr
;
3241 // If LOAD_SEG is NULL, then the file header and segment headers
3242 // will not be loadable. But they still need to be at offset 0 in
3243 // the file. Set their offsets now.
3244 if (load_seg
== NULL
)
3246 for (Data_list::iterator p
= this->special_output_list_
.begin();
3247 p
!= this->special_output_list_
.end();
3250 off
= align_address(off
, (*p
)->addralign());
3251 (*p
)->set_address_and_file_offset(0, off
);
3252 off
+= (*p
)->data_size();
3256 unsigned int increase_relro
= this->increase_relro_
;
3257 if (this->script_options_
->saw_sections_clause())
3260 const bool check_sections
= parameters
->options().check_sections();
3261 Output_segment
* last_load_segment
= NULL
;
3263 unsigned int shndx_begin
= *pshndx
;
3264 unsigned int shndx_load_seg
= *pshndx
;
3266 for (Segment_list::iterator p
= this->segment_list_
.begin();
3267 p
!= this->segment_list_
.end();
3270 if ((*p
)->type() == elfcpp::PT_LOAD
)
3272 if (target
->isolate_execinstr())
3274 // When we hit the segment that should contain the
3275 // file headers, reset the file offset so we place
3276 // it and subsequent segments appropriately.
3277 // We'll fix up the preceding segments below.
3285 shndx_load_seg
= *pshndx
;
3291 // Verify that the file headers fall into the first segment.
3292 if (load_seg
!= NULL
&& load_seg
!= *p
)
3297 bool are_addresses_set
= (*p
)->are_addresses_set();
3298 if (are_addresses_set
)
3300 // When it comes to setting file offsets, we care about
3301 // the physical address.
3302 addr
= (*p
)->paddr();
3304 else if (parameters
->options().user_set_Ttext()
3305 && ((*p
)->flags() & elfcpp::PF_W
) == 0)
3307 are_addresses_set
= true;
3309 else if (parameters
->options().user_set_Tdata()
3310 && ((*p
)->flags() & elfcpp::PF_W
) != 0
3311 && (!parameters
->options().user_set_Tbss()
3312 || (*p
)->has_any_data_sections()))
3314 addr
= parameters
->options().Tdata();
3315 are_addresses_set
= true;
3317 else if (parameters
->options().user_set_Tbss()
3318 && ((*p
)->flags() & elfcpp::PF_W
) != 0
3319 && !(*p
)->has_any_data_sections())
3321 addr
= parameters
->options().Tbss();
3322 are_addresses_set
= true;
3325 uint64_t orig_addr
= addr
;
3326 uint64_t orig_off
= off
;
3328 uint64_t aligned_addr
= 0;
3329 uint64_t abi_pagesize
= target
->abi_pagesize();
3330 uint64_t common_pagesize
= target
->common_pagesize();
3332 if (!parameters
->options().nmagic()
3333 && !parameters
->options().omagic())
3334 (*p
)->set_minimum_p_align(abi_pagesize
);
3336 if (!are_addresses_set
)
3338 // Skip the address forward one page, maintaining the same
3339 // position within the page. This lets us store both segments
3340 // overlapping on a single page in the file, but the loader will
3341 // put them on different pages in memory. We will revisit this
3342 // decision once we know the size of the segment.
3344 addr
= align_address(addr
, (*p
)->maximum_alignment());
3345 aligned_addr
= addr
;
3349 // This is the segment that will contain the file
3350 // headers, so its offset will have to be exactly zero.
3351 gold_assert(orig_off
== 0);
3353 // If the target wants a fixed minimum distance from the
3354 // text segment to the read-only segment, move up now.
3355 uint64_t min_addr
= start_addr
+ target
->rosegment_gap();
3356 if (addr
< min_addr
)
3359 // But this is not the first segment! To make its
3360 // address congruent with its offset, that address better
3361 // be aligned to the ABI-mandated page size.
3362 addr
= align_address(addr
, abi_pagesize
);
3363 aligned_addr
= addr
;
3367 if ((addr
& (abi_pagesize
- 1)) != 0)
3368 addr
= addr
+ abi_pagesize
;
3370 off
= orig_off
+ ((addr
- orig_addr
) & (abi_pagesize
- 1));
3374 if (!parameters
->options().nmagic()
3375 && !parameters
->options().omagic())
3376 off
= align_file_offset(off
, addr
, abi_pagesize
);
3379 // This is -N or -n with a section script which prevents
3380 // us from using a load segment. We need to ensure that
3381 // the file offset is aligned to the alignment of the
3382 // segment. This is because the linker script
3383 // implicitly assumed a zero offset. If we don't align
3384 // here, then the alignment of the sections in the
3385 // linker script may not match the alignment of the
3386 // sections in the set_section_addresses call below,
3387 // causing an error about dot moving backward.
3388 off
= align_address(off
, (*p
)->maximum_alignment());
3391 unsigned int shndx_hold
= *pshndx
;
3392 bool has_relro
= false;
3393 uint64_t new_addr
= (*p
)->set_section_addresses(this, false, addr
,
3398 // Now that we know the size of this segment, we may be able
3399 // to save a page in memory, at the cost of wasting some
3400 // file space, by instead aligning to the start of a new
3401 // page. Here we use the real machine page size rather than
3402 // the ABI mandated page size. If the segment has been
3403 // aligned so that the relro data ends at a page boundary,
3404 // we do not try to realign it.
3406 if (!are_addresses_set
3408 && aligned_addr
!= addr
3409 && !parameters
->incremental())
3411 uint64_t first_off
= (common_pagesize
3413 & (common_pagesize
- 1)));
3414 uint64_t last_off
= new_addr
& (common_pagesize
- 1);
3417 && ((aligned_addr
& ~ (common_pagesize
- 1))
3418 != (new_addr
& ~ (common_pagesize
- 1)))
3419 && first_off
+ last_off
<= common_pagesize
)
3421 *pshndx
= shndx_hold
;
3422 addr
= align_address(aligned_addr
, common_pagesize
);
3423 addr
= align_address(addr
, (*p
)->maximum_alignment());
3424 if ((addr
& (abi_pagesize
- 1)) != 0)
3425 addr
= addr
+ abi_pagesize
;
3426 off
= orig_off
+ ((addr
- orig_addr
) & (abi_pagesize
- 1));
3427 off
= align_file_offset(off
, addr
, abi_pagesize
);
3429 increase_relro
= this->increase_relro_
;
3430 if (this->script_options_
->saw_sections_clause())
3434 new_addr
= (*p
)->set_section_addresses(this, true, addr
,
3443 // Implement --check-sections. We know that the segments
3444 // are sorted by LMA.
3445 if (check_sections
&& last_load_segment
!= NULL
)
3447 gold_assert(last_load_segment
->paddr() <= (*p
)->paddr());
3448 if (last_load_segment
->paddr() + last_load_segment
->memsz()
3451 unsigned long long lb1
= last_load_segment
->paddr();
3452 unsigned long long le1
= lb1
+ last_load_segment
->memsz();
3453 unsigned long long lb2
= (*p
)->paddr();
3454 unsigned long long le2
= lb2
+ (*p
)->memsz();
3455 gold_error(_("load segment overlap [0x%llx -> 0x%llx] and "
3456 "[0x%llx -> 0x%llx]"),
3457 lb1
, le1
, lb2
, le2
);
3460 last_load_segment
= *p
;
3464 if (load_seg
!= NULL
&& target
->isolate_execinstr())
3466 // Process the early segments again, setting their file offsets
3467 // so they land after the segments starting at LOAD_SEG.
3468 off
= align_file_offset(off
, 0, target
->abi_pagesize());
3470 for (Segment_list::iterator p
= this->segment_list_
.begin();
3474 if ((*p
)->type() == elfcpp::PT_LOAD
)
3476 // We repeat the whole job of assigning addresses and
3477 // offsets, but we really only want to change the offsets and
3478 // must ensure that the addresses all come out the same as
3479 // they did the first time through.
3480 bool has_relro
= false;
3481 const uint64_t old_addr
= (*p
)->vaddr();
3482 const uint64_t old_end
= old_addr
+ (*p
)->memsz();
3483 uint64_t new_addr
= (*p
)->set_section_addresses(this, true,
3489 gold_assert(new_addr
== old_end
);
3493 gold_assert(shndx_begin
== shndx_load_seg
);
3496 // Handle the non-PT_LOAD segments, setting their offsets from their
3497 // section's offsets.
3498 for (Segment_list::iterator p
= this->segment_list_
.begin();
3499 p
!= this->segment_list_
.end();
3502 if ((*p
)->type() != elfcpp::PT_LOAD
)
3503 (*p
)->set_offset((*p
)->type() == elfcpp::PT_GNU_RELRO
3508 // Set the TLS offsets for each section in the PT_TLS segment.
3509 if (this->tls_segment_
!= NULL
)
3510 this->tls_segment_
->set_tls_offsets();
3515 // Set the offsets of all the allocated sections when doing a
3516 // relocatable link. This does the same jobs as set_segment_offsets,
3517 // only for a relocatable link.
3520 Layout::set_relocatable_section_offsets(Output_data
* file_header
,
3521 unsigned int* pshndx
)
3525 file_header
->set_address_and_file_offset(0, 0);
3526 off
+= file_header
->data_size();
3528 for (Section_list::iterator p
= this->section_list_
.begin();
3529 p
!= this->section_list_
.end();
3532 // We skip unallocated sections here, except that group sections
3533 // have to come first.
3534 if (((*p
)->flags() & elfcpp::SHF_ALLOC
) == 0
3535 && (*p
)->type() != elfcpp::SHT_GROUP
)
3538 off
= align_address(off
, (*p
)->addralign());
3540 // The linker script might have set the address.
3541 if (!(*p
)->is_address_valid())
3542 (*p
)->set_address(0);
3543 (*p
)->set_file_offset(off
);
3544 (*p
)->finalize_data_size();
3545 off
+= (*p
)->data_size();
3547 (*p
)->set_out_shndx(*pshndx
);
3554 // Set the file offset of all the sections not associated with a
3558 Layout::set_section_offsets(off_t off
, Layout::Section_offset_pass pass
)
3560 off_t startoff
= off
;
3563 for (Section_list::iterator p
= this->unattached_section_list_
.begin();
3564 p
!= this->unattached_section_list_
.end();
3567 // The symtab section is handled in create_symtab_sections.
3568 if (*p
== this->symtab_section_
)
3571 // If we've already set the data size, don't set it again.
3572 if ((*p
)->is_offset_valid() && (*p
)->is_data_size_valid())
3575 if (pass
== BEFORE_INPUT_SECTIONS_PASS
3576 && (*p
)->requires_postprocessing())
3578 (*p
)->create_postprocessing_buffer();
3579 this->any_postprocessing_sections_
= true;
3582 if (pass
== BEFORE_INPUT_SECTIONS_PASS
3583 && (*p
)->after_input_sections())
3585 else if (pass
== POSTPROCESSING_SECTIONS_PASS
3586 && (!(*p
)->after_input_sections()
3587 || (*p
)->type() == elfcpp::SHT_STRTAB
))
3589 else if (pass
== STRTAB_AFTER_POSTPROCESSING_SECTIONS_PASS
3590 && (!(*p
)->after_input_sections()
3591 || (*p
)->type() != elfcpp::SHT_STRTAB
))
3594 if (!parameters
->incremental_update())
3596 off
= align_address(off
, (*p
)->addralign());
3597 (*p
)->set_file_offset(off
);
3598 (*p
)->finalize_data_size();
3602 // Incremental update: allocate file space from free list.
3603 (*p
)->pre_finalize_data_size();
3604 off_t current_size
= (*p
)->current_data_size();
3605 off
= this->allocate(current_size
, (*p
)->addralign(), startoff
);
3608 if (is_debugging_enabled(DEBUG_INCREMENTAL
))
3609 this->free_list_
.dump();
3610 gold_assert((*p
)->output_section() != NULL
);
3611 gold_fallback(_("out of patch space for section %s; "
3612 "relink with --incremental-full"),
3613 (*p
)->output_section()->name());
3615 (*p
)->set_file_offset(off
);
3616 (*p
)->finalize_data_size();
3617 if ((*p
)->data_size() > current_size
)
3619 gold_assert((*p
)->output_section() != NULL
);
3620 gold_fallback(_("%s: section changed size; "
3621 "relink with --incremental-full"),
3622 (*p
)->output_section()->name());
3624 gold_debug(DEBUG_INCREMENTAL
,
3625 "set_section_offsets: %08lx %08lx %s",
3626 static_cast<long>(off
),
3627 static_cast<long>((*p
)->data_size()),
3628 ((*p
)->output_section() != NULL
3629 ? (*p
)->output_section()->name() : "(special)"));
3632 off
+= (*p
)->data_size();
3636 // At this point the name must be set.
3637 if (pass
!= STRTAB_AFTER_POSTPROCESSING_SECTIONS_PASS
)
3638 this->namepool_
.add((*p
)->name(), false, NULL
);
3643 // Set the section indexes of all the sections not associated with a
3647 Layout::set_section_indexes(unsigned int shndx
)
3649 for (Section_list::iterator p
= this->unattached_section_list_
.begin();
3650 p
!= this->unattached_section_list_
.end();
3653 if (!(*p
)->has_out_shndx())
3655 (*p
)->set_out_shndx(shndx
);
3662 // Set the section addresses according to the linker script. This is
3663 // only called when we see a SECTIONS clause. This returns the
3664 // program segment which should hold the file header and segment
3665 // headers, if any. It will return NULL if they should not be in a
3669 Layout::set_section_addresses_from_script(Symbol_table
* symtab
)
3671 Script_sections
* ss
= this->script_options_
->script_sections();
3672 gold_assert(ss
->saw_sections_clause());
3673 return this->script_options_
->set_section_addresses(symtab
, this);
3676 // Place the orphan sections in the linker script.
3679 Layout::place_orphan_sections_in_script()
3681 Script_sections
* ss
= this->script_options_
->script_sections();
3682 gold_assert(ss
->saw_sections_clause());
3684 // Place each orphaned output section in the script.
3685 for (Section_list::iterator p
= this->section_list_
.begin();
3686 p
!= this->section_list_
.end();
3689 if (!(*p
)->found_in_sections_clause())
3690 ss
->place_orphan(*p
);
3694 // Count the local symbols in the regular symbol table and the dynamic
3695 // symbol table, and build the respective string pools.
3698 Layout::count_local_symbols(const Task
* task
,
3699 const Input_objects
* input_objects
)
3701 // First, figure out an upper bound on the number of symbols we'll
3702 // be inserting into each pool. This helps us create the pools with
3703 // the right size, to avoid unnecessary hashtable resizing.
3704 unsigned int symbol_count
= 0;
3705 for (Input_objects::Relobj_iterator p
= input_objects
->relobj_begin();
3706 p
!= input_objects
->relobj_end();
3708 symbol_count
+= (*p
)->local_symbol_count();
3710 // Go from "upper bound" to "estimate." We overcount for two
3711 // reasons: we double-count symbols that occur in more than one
3712 // object file, and we count symbols that are dropped from the
3713 // output. Add it all together and assume we overcount by 100%.
3716 // We assume all symbols will go into both the sympool and dynpool.
3717 this->sympool_
.reserve(symbol_count
);
3718 this->dynpool_
.reserve(symbol_count
);
3720 for (Input_objects::Relobj_iterator p
= input_objects
->relobj_begin();
3721 p
!= input_objects
->relobj_end();
3724 Task_lock_obj
<Object
> tlo(task
, *p
);
3725 (*p
)->count_local_symbols(&this->sympool_
, &this->dynpool_
);
3729 // Create the symbol table sections. Here we also set the final
3730 // values of the symbols. At this point all the loadable sections are
3731 // fully laid out. SHNUM is the number of sections so far.
3734 Layout::create_symtab_sections(const Input_objects
* input_objects
,
3735 Symbol_table
* symtab
,
3741 if (parameters
->target().get_size() == 32)
3743 symsize
= elfcpp::Elf_sizes
<32>::sym_size
;
3746 else if (parameters
->target().get_size() == 64)
3748 symsize
= elfcpp::Elf_sizes
<64>::sym_size
;
3754 // Compute file offsets relative to the start of the symtab section.
3757 // Save space for the dummy symbol at the start of the section. We
3758 // never bother to write this out--it will just be left as zero.
3760 unsigned int local_symbol_index
= 1;
3762 // Add STT_SECTION symbols for each Output section which needs one.
3763 for (Section_list::iterator p
= this->section_list_
.begin();
3764 p
!= this->section_list_
.end();
3767 if (!(*p
)->needs_symtab_index())
3768 (*p
)->set_symtab_index(-1U);
3771 (*p
)->set_symtab_index(local_symbol_index
);
3772 ++local_symbol_index
;
3777 for (Input_objects::Relobj_iterator p
= input_objects
->relobj_begin();
3778 p
!= input_objects
->relobj_end();
3781 unsigned int index
= (*p
)->finalize_local_symbols(local_symbol_index
,
3783 off
+= (index
- local_symbol_index
) * symsize
;
3784 local_symbol_index
= index
;
3787 unsigned int local_symcount
= local_symbol_index
;
3788 gold_assert(static_cast<off_t
>(local_symcount
* symsize
) == off
);
3791 size_t dyn_global_index
;
3793 if (this->dynsym_section_
== NULL
)
3796 dyn_global_index
= 0;
3801 dyn_global_index
= this->dynsym_section_
->info();
3802 off_t locsize
= dyn_global_index
* this->dynsym_section_
->entsize();
3803 dynoff
= this->dynsym_section_
->offset() + locsize
;
3804 dyncount
= (this->dynsym_section_
->data_size() - locsize
) / symsize
;
3805 gold_assert(static_cast<off_t
>(dyncount
* symsize
)
3806 == this->dynsym_section_
->data_size() - locsize
);
3809 off_t global_off
= off
;
3810 off
= symtab
->finalize(off
, dynoff
, dyn_global_index
, dyncount
,
3811 &this->sympool_
, &local_symcount
);
3813 if (!parameters
->options().strip_all())
3815 this->sympool_
.set_string_offsets();
3817 const char* symtab_name
= this->namepool_
.add(".symtab", false, NULL
);
3818 Output_section
* osymtab
= this->make_output_section(symtab_name
,
3822 this->symtab_section_
= osymtab
;
3824 Output_section_data
* pos
= new Output_data_fixed_space(off
, align
,
3826 osymtab
->add_output_section_data(pos
);
3828 // We generate a .symtab_shndx section if we have more than
3829 // SHN_LORESERVE sections. Technically it is possible that we
3830 // don't need one, because it is possible that there are no
3831 // symbols in any of sections with indexes larger than
3832 // SHN_LORESERVE. That is probably unusual, though, and it is
3833 // easier to always create one than to compute section indexes
3834 // twice (once here, once when writing out the symbols).
3835 if (shnum
>= elfcpp::SHN_LORESERVE
)
3837 const char* symtab_xindex_name
= this->namepool_
.add(".symtab_shndx",
3839 Output_section
* osymtab_xindex
=
3840 this->make_output_section(symtab_xindex_name
,
3841 elfcpp::SHT_SYMTAB_SHNDX
, 0,
3842 ORDER_INVALID
, false);
3844 size_t symcount
= off
/ symsize
;
3845 this->symtab_xindex_
= new Output_symtab_xindex(symcount
);
3847 osymtab_xindex
->add_output_section_data(this->symtab_xindex_
);
3849 osymtab_xindex
->set_link_section(osymtab
);
3850 osymtab_xindex
->set_addralign(4);
3851 osymtab_xindex
->set_entsize(4);
3853 osymtab_xindex
->set_after_input_sections();
3855 // This tells the driver code to wait until the symbol table
3856 // has written out before writing out the postprocessing
3857 // sections, including the .symtab_shndx section.
3858 this->any_postprocessing_sections_
= true;
3861 const char* strtab_name
= this->namepool_
.add(".strtab", false, NULL
);
3862 Output_section
* ostrtab
= this->make_output_section(strtab_name
,
3867 Output_section_data
* pstr
= new Output_data_strtab(&this->sympool_
);
3868 ostrtab
->add_output_section_data(pstr
);
3871 if (!parameters
->incremental_update())
3872 symtab_off
= align_address(*poff
, align
);
3875 symtab_off
= this->allocate(off
, align
, *poff
);
3877 gold_fallback(_("out of patch space for symbol table; "
3878 "relink with --incremental-full"));
3879 gold_debug(DEBUG_INCREMENTAL
,
3880 "create_symtab_sections: %08lx %08lx .symtab",
3881 static_cast<long>(symtab_off
),
3882 static_cast<long>(off
));
3885 symtab
->set_file_offset(symtab_off
+ global_off
);
3886 osymtab
->set_file_offset(symtab_off
);
3887 osymtab
->finalize_data_size();
3888 osymtab
->set_link_section(ostrtab
);
3889 osymtab
->set_info(local_symcount
);
3890 osymtab
->set_entsize(symsize
);
3892 if (symtab_off
+ off
> *poff
)
3893 *poff
= symtab_off
+ off
;
3897 // Create the .shstrtab section, which holds the names of the
3898 // sections. At the time this is called, we have created all the
3899 // output sections except .shstrtab itself.
3902 Layout::create_shstrtab()
3904 // FIXME: We don't need to create a .shstrtab section if we are
3905 // stripping everything.
3907 const char* name
= this->namepool_
.add(".shstrtab", false, NULL
);
3909 Output_section
* os
= this->make_output_section(name
, elfcpp::SHT_STRTAB
, 0,
3910 ORDER_INVALID
, false);
3912 if (strcmp(parameters
->options().compress_debug_sections(), "none") != 0)
3914 // We can't write out this section until we've set all the
3915 // section names, and we don't set the names of compressed
3916 // output sections until relocations are complete. FIXME: With
3917 // the current names we use, this is unnecessary.
3918 os
->set_after_input_sections();
3921 Output_section_data
* posd
= new Output_data_strtab(&this->namepool_
);
3922 os
->add_output_section_data(posd
);
3927 // Create the section headers. SIZE is 32 or 64. OFF is the file
3931 Layout::create_shdrs(const Output_section
* shstrtab_section
, off_t
* poff
)
3933 Output_section_headers
* oshdrs
;
3934 oshdrs
= new Output_section_headers(this,
3935 &this->segment_list_
,
3936 &this->section_list_
,
3937 &this->unattached_section_list_
,
3941 if (!parameters
->incremental_update())
3942 off
= align_address(*poff
, oshdrs
->addralign());
3945 oshdrs
->pre_finalize_data_size();
3946 off
= this->allocate(oshdrs
->data_size(), oshdrs
->addralign(), *poff
);
3948 gold_fallback(_("out of patch space for section header table; "
3949 "relink with --incremental-full"));
3950 gold_debug(DEBUG_INCREMENTAL
,
3951 "create_shdrs: %08lx %08lx (section header table)",
3952 static_cast<long>(off
),
3953 static_cast<long>(off
+ oshdrs
->data_size()));
3955 oshdrs
->set_address_and_file_offset(0, off
);
3956 off
+= oshdrs
->data_size();
3959 this->section_headers_
= oshdrs
;
3962 // Count the allocated sections.
3965 Layout::allocated_output_section_count() const
3967 size_t section_count
= 0;
3968 for (Segment_list::const_iterator p
= this->segment_list_
.begin();
3969 p
!= this->segment_list_
.end();
3971 section_count
+= (*p
)->output_section_count();
3972 return section_count
;
3975 // Create the dynamic symbol table.
3978 Layout::create_dynamic_symtab(const Input_objects
* input_objects
,
3979 Symbol_table
* symtab
,
3980 Output_section
** pdynstr
,
3981 unsigned int* plocal_dynamic_count
,
3982 std::vector
<Symbol
*>* pdynamic_symbols
,
3983 Versions
* pversions
)
3985 // Count all the symbols in the dynamic symbol table, and set the
3986 // dynamic symbol indexes.
3988 // Skip symbol 0, which is always all zeroes.
3989 unsigned int index
= 1;
3991 // Add STT_SECTION symbols for each Output section which needs one.
3992 for (Section_list::iterator p
= this->section_list_
.begin();
3993 p
!= this->section_list_
.end();
3996 if (!(*p
)->needs_dynsym_index())
3997 (*p
)->set_dynsym_index(-1U);
4000 (*p
)->set_dynsym_index(index
);
4005 // Count the local symbols that need to go in the dynamic symbol table,
4006 // and set the dynamic symbol indexes.
4007 for (Input_objects::Relobj_iterator p
= input_objects
->relobj_begin();
4008 p
!= input_objects
->relobj_end();
4011 unsigned int new_index
= (*p
)->set_local_dynsym_indexes(index
);
4015 unsigned int local_symcount
= index
;
4016 *plocal_dynamic_count
= local_symcount
;
4018 index
= symtab
->set_dynsym_indexes(index
, pdynamic_symbols
,
4019 &this->dynpool_
, pversions
);
4023 const int size
= parameters
->target().get_size();
4026 symsize
= elfcpp::Elf_sizes
<32>::sym_size
;
4029 else if (size
== 64)
4031 symsize
= elfcpp::Elf_sizes
<64>::sym_size
;
4037 // Create the dynamic symbol table section.
4039 Output_section
* dynsym
= this->choose_output_section(NULL
, ".dynsym",
4043 ORDER_DYNAMIC_LINKER
,
4046 // Check for NULL as a linker script may discard .dynsym.
4049 Output_section_data
* odata
= new Output_data_fixed_space(index
* symsize
,
4052 dynsym
->add_output_section_data(odata
);
4054 dynsym
->set_info(local_symcount
);
4055 dynsym
->set_entsize(symsize
);
4056 dynsym
->set_addralign(align
);
4058 this->dynsym_section_
= dynsym
;
4061 Output_data_dynamic
* const odyn
= this->dynamic_data_
;
4064 odyn
->add_section_address(elfcpp::DT_SYMTAB
, dynsym
);
4065 odyn
->add_constant(elfcpp::DT_SYMENT
, symsize
);
4068 // If there are more than SHN_LORESERVE allocated sections, we
4069 // create a .dynsym_shndx section. It is possible that we don't
4070 // need one, because it is possible that there are no dynamic
4071 // symbols in any of the sections with indexes larger than
4072 // SHN_LORESERVE. This is probably unusual, though, and at this
4073 // time we don't know the actual section indexes so it is
4074 // inconvenient to check.
4075 if (this->allocated_output_section_count() >= elfcpp::SHN_LORESERVE
)
4077 Output_section
* dynsym_xindex
=
4078 this->choose_output_section(NULL
, ".dynsym_shndx",
4079 elfcpp::SHT_SYMTAB_SHNDX
,
4081 false, ORDER_DYNAMIC_LINKER
, false);
4083 if (dynsym_xindex
!= NULL
)
4085 this->dynsym_xindex_
= new Output_symtab_xindex(index
);
4087 dynsym_xindex
->add_output_section_data(this->dynsym_xindex_
);
4089 dynsym_xindex
->set_link_section(dynsym
);
4090 dynsym_xindex
->set_addralign(4);
4091 dynsym_xindex
->set_entsize(4);
4093 dynsym_xindex
->set_after_input_sections();
4095 // This tells the driver code to wait until the symbol table
4096 // has written out before writing out the postprocessing
4097 // sections, including the .dynsym_shndx section.
4098 this->any_postprocessing_sections_
= true;
4102 // Create the dynamic string table section.
4104 Output_section
* dynstr
= this->choose_output_section(NULL
, ".dynstr",
4108 ORDER_DYNAMIC_LINKER
,
4113 Output_section_data
* strdata
= new Output_data_strtab(&this->dynpool_
);
4114 dynstr
->add_output_section_data(strdata
);
4117 dynsym
->set_link_section(dynstr
);
4118 if (this->dynamic_section_
!= NULL
)
4119 this->dynamic_section_
->set_link_section(dynstr
);
4123 odyn
->add_section_address(elfcpp::DT_STRTAB
, dynstr
);
4124 odyn
->add_section_size(elfcpp::DT_STRSZ
, dynstr
);
4130 // Create the hash tables.
4132 if (strcmp(parameters
->options().hash_style(), "sysv") == 0
4133 || strcmp(parameters
->options().hash_style(), "both") == 0)
4135 unsigned char* phash
;
4136 unsigned int hashlen
;
4137 Dynobj::create_elf_hash_table(*pdynamic_symbols
, local_symcount
,
4140 Output_section
* hashsec
=
4141 this->choose_output_section(NULL
, ".hash", elfcpp::SHT_HASH
,
4142 elfcpp::SHF_ALLOC
, false,
4143 ORDER_DYNAMIC_LINKER
, false);
4145 Output_section_data
* hashdata
= new Output_data_const_buffer(phash
,
4149 if (hashsec
!= NULL
&& hashdata
!= NULL
)
4150 hashsec
->add_output_section_data(hashdata
);
4152 if (hashsec
!= NULL
)
4155 hashsec
->set_link_section(dynsym
);
4156 hashsec
->set_entsize(4);
4160 odyn
->add_section_address(elfcpp::DT_HASH
, hashsec
);
4163 if (strcmp(parameters
->options().hash_style(), "gnu") == 0
4164 || strcmp(parameters
->options().hash_style(), "both") == 0)
4166 unsigned char* phash
;
4167 unsigned int hashlen
;
4168 Dynobj::create_gnu_hash_table(*pdynamic_symbols
, local_symcount
,
4171 Output_section
* hashsec
=
4172 this->choose_output_section(NULL
, ".gnu.hash", elfcpp::SHT_GNU_HASH
,
4173 elfcpp::SHF_ALLOC
, false,
4174 ORDER_DYNAMIC_LINKER
, false);
4176 Output_section_data
* hashdata
= new Output_data_const_buffer(phash
,
4180 if (hashsec
!= NULL
&& hashdata
!= NULL
)
4181 hashsec
->add_output_section_data(hashdata
);
4183 if (hashsec
!= NULL
)
4186 hashsec
->set_link_section(dynsym
);
4188 // For a 64-bit target, the entries in .gnu.hash do not have
4189 // a uniform size, so we only set the entry size for a
4191 if (parameters
->target().get_size() == 32)
4192 hashsec
->set_entsize(4);
4195 odyn
->add_section_address(elfcpp::DT_GNU_HASH
, hashsec
);
4200 // Assign offsets to each local portion of the dynamic symbol table.
4203 Layout::assign_local_dynsym_offsets(const Input_objects
* input_objects
)
4205 Output_section
* dynsym
= this->dynsym_section_
;
4209 off_t off
= dynsym
->offset();
4211 // Skip the dummy symbol at the start of the section.
4212 off
+= dynsym
->entsize();
4214 for (Input_objects::Relobj_iterator p
= input_objects
->relobj_begin();
4215 p
!= input_objects
->relobj_end();
4218 unsigned int count
= (*p
)->set_local_dynsym_offset(off
);
4219 off
+= count
* dynsym
->entsize();
4223 // Create the version sections.
4226 Layout::create_version_sections(const Versions
* versions
,
4227 const Symbol_table
* symtab
,
4228 unsigned int local_symcount
,
4229 const std::vector
<Symbol
*>& dynamic_symbols
,
4230 const Output_section
* dynstr
)
4232 if (!versions
->any_defs() && !versions
->any_needs())
4235 switch (parameters
->size_and_endianness())
4237 #ifdef HAVE_TARGET_32_LITTLE
4238 case Parameters::TARGET_32_LITTLE
:
4239 this->sized_create_version_sections
<32, false>(versions
, symtab
,
4241 dynamic_symbols
, dynstr
);
4244 #ifdef HAVE_TARGET_32_BIG
4245 case Parameters::TARGET_32_BIG
:
4246 this->sized_create_version_sections
<32, true>(versions
, symtab
,
4248 dynamic_symbols
, dynstr
);
4251 #ifdef HAVE_TARGET_64_LITTLE
4252 case Parameters::TARGET_64_LITTLE
:
4253 this->sized_create_version_sections
<64, false>(versions
, symtab
,
4255 dynamic_symbols
, dynstr
);
4258 #ifdef HAVE_TARGET_64_BIG
4259 case Parameters::TARGET_64_BIG
:
4260 this->sized_create_version_sections
<64, true>(versions
, symtab
,
4262 dynamic_symbols
, dynstr
);
4270 // Create the version sections, sized version.
4272 template<int size
, bool big_endian
>
4274 Layout::sized_create_version_sections(
4275 const Versions
* versions
,
4276 const Symbol_table
* symtab
,
4277 unsigned int local_symcount
,
4278 const std::vector
<Symbol
*>& dynamic_symbols
,
4279 const Output_section
* dynstr
)
4281 Output_section
* vsec
= this->choose_output_section(NULL
, ".gnu.version",
4282 elfcpp::SHT_GNU_versym
,
4285 ORDER_DYNAMIC_LINKER
,
4288 // Check for NULL since a linker script may discard this section.
4291 unsigned char* vbuf
;
4293 versions
->symbol_section_contents
<size
, big_endian
>(symtab
,
4299 Output_section_data
* vdata
= new Output_data_const_buffer(vbuf
, vsize
, 2,
4302 vsec
->add_output_section_data(vdata
);
4303 vsec
->set_entsize(2);
4304 vsec
->set_link_section(this->dynsym_section_
);
4307 Output_data_dynamic
* const odyn
= this->dynamic_data_
;
4308 if (odyn
!= NULL
&& vsec
!= NULL
)
4309 odyn
->add_section_address(elfcpp::DT_VERSYM
, vsec
);
4311 if (versions
->any_defs())
4313 Output_section
* vdsec
;
4314 vdsec
= this->choose_output_section(NULL
, ".gnu.version_d",
4315 elfcpp::SHT_GNU_verdef
,
4317 false, ORDER_DYNAMIC_LINKER
, false);
4321 unsigned char* vdbuf
;
4322 unsigned int vdsize
;
4323 unsigned int vdentries
;
4324 versions
->def_section_contents
<size
, big_endian
>(&this->dynpool_
,
4328 Output_section_data
* vddata
=
4329 new Output_data_const_buffer(vdbuf
, vdsize
, 4, "** version defs");
4331 vdsec
->add_output_section_data(vddata
);
4332 vdsec
->set_link_section(dynstr
);
4333 vdsec
->set_info(vdentries
);
4337 odyn
->add_section_address(elfcpp::DT_VERDEF
, vdsec
);
4338 odyn
->add_constant(elfcpp::DT_VERDEFNUM
, vdentries
);
4343 if (versions
->any_needs())
4345 Output_section
* vnsec
;
4346 vnsec
= this->choose_output_section(NULL
, ".gnu.version_r",
4347 elfcpp::SHT_GNU_verneed
,
4349 false, ORDER_DYNAMIC_LINKER
, false);
4353 unsigned char* vnbuf
;
4354 unsigned int vnsize
;
4355 unsigned int vnentries
;
4356 versions
->need_section_contents
<size
, big_endian
>(&this->dynpool_
,
4360 Output_section_data
* vndata
=
4361 new Output_data_const_buffer(vnbuf
, vnsize
, 4, "** version refs");
4363 vnsec
->add_output_section_data(vndata
);
4364 vnsec
->set_link_section(dynstr
);
4365 vnsec
->set_info(vnentries
);
4369 odyn
->add_section_address(elfcpp::DT_VERNEED
, vnsec
);
4370 odyn
->add_constant(elfcpp::DT_VERNEEDNUM
, vnentries
);
4376 // Create the .interp section and PT_INTERP segment.
4379 Layout::create_interp(const Target
* target
)
4381 gold_assert(this->interp_segment_
== NULL
);
4383 const char* interp
= parameters
->options().dynamic_linker();
4386 interp
= target
->dynamic_linker();
4387 gold_assert(interp
!= NULL
);
4390 size_t len
= strlen(interp
) + 1;
4392 Output_section_data
* odata
= new Output_data_const(interp
, len
, 1);
4394 Output_section
* osec
= this->choose_output_section(NULL
, ".interp",
4395 elfcpp::SHT_PROGBITS
,
4397 false, ORDER_INTERP
,
4400 osec
->add_output_section_data(odata
);
4403 // Add dynamic tags for the PLT and the dynamic relocs. This is
4404 // called by the target-specific code. This does nothing if not doing
4407 // USE_REL is true for REL relocs rather than RELA relocs.
4409 // If PLT_GOT is not NULL, then DT_PLTGOT points to it.
4411 // If PLT_REL is not NULL, it is used for DT_PLTRELSZ, and DT_JMPREL,
4412 // and we also set DT_PLTREL. We use PLT_REL's output section, since
4413 // some targets have multiple reloc sections in PLT_REL.
4415 // If DYN_REL is not NULL, it is used for DT_REL/DT_RELA,
4416 // DT_RELSZ/DT_RELASZ, DT_RELENT/DT_RELAENT. Again we use the output
4419 // If ADD_DEBUG is true, we add a DT_DEBUG entry when generating an
4423 Layout::add_target_dynamic_tags(bool use_rel
, const Output_data
* plt_got
,
4424 const Output_data
* plt_rel
,
4425 const Output_data_reloc_generic
* dyn_rel
,
4426 bool add_debug
, bool dynrel_includes_plt
)
4428 Output_data_dynamic
* odyn
= this->dynamic_data_
;
4432 if (plt_got
!= NULL
&& plt_got
->output_section() != NULL
)
4433 odyn
->add_section_address(elfcpp::DT_PLTGOT
, plt_got
);
4435 if (plt_rel
!= NULL
&& plt_rel
->output_section() != NULL
)
4437 odyn
->add_section_size(elfcpp::DT_PLTRELSZ
, plt_rel
->output_section());
4438 odyn
->add_section_address(elfcpp::DT_JMPREL
, plt_rel
->output_section());
4439 odyn
->add_constant(elfcpp::DT_PLTREL
,
4440 use_rel
? elfcpp::DT_REL
: elfcpp::DT_RELA
);
4443 if ((dyn_rel
!= NULL
&& dyn_rel
->output_section() != NULL
)
4444 || (dynrel_includes_plt
4446 && plt_rel
->output_section() != NULL
))
4448 bool have_dyn_rel
= dyn_rel
!= NULL
&& dyn_rel
->output_section() != NULL
;
4449 bool have_plt_rel
= plt_rel
!= NULL
&& plt_rel
->output_section() != NULL
;
4450 odyn
->add_section_address(use_rel
? elfcpp::DT_REL
: elfcpp::DT_RELA
,
4452 ? dyn_rel
->output_section()
4453 : plt_rel
->output_section()));
4454 elfcpp::DT size_tag
= use_rel
? elfcpp::DT_RELSZ
: elfcpp::DT_RELASZ
;
4455 if (have_dyn_rel
&& have_plt_rel
&& dynrel_includes_plt
)
4456 odyn
->add_section_size(size_tag
,
4457 dyn_rel
->output_section(),
4458 plt_rel
->output_section());
4459 else if (have_dyn_rel
)
4460 odyn
->add_section_size(size_tag
, dyn_rel
->output_section());
4462 odyn
->add_section_size(size_tag
, plt_rel
->output_section());
4463 const int size
= parameters
->target().get_size();
4468 rel_tag
= elfcpp::DT_RELENT
;
4470 rel_size
= Reloc_types
<elfcpp::SHT_REL
, 32, false>::reloc_size
;
4471 else if (size
== 64)
4472 rel_size
= Reloc_types
<elfcpp::SHT_REL
, 64, false>::reloc_size
;
4478 rel_tag
= elfcpp::DT_RELAENT
;
4480 rel_size
= Reloc_types
<elfcpp::SHT_RELA
, 32, false>::reloc_size
;
4481 else if (size
== 64)
4482 rel_size
= Reloc_types
<elfcpp::SHT_RELA
, 64, false>::reloc_size
;
4486 odyn
->add_constant(rel_tag
, rel_size
);
4488 if (parameters
->options().combreloc() && have_dyn_rel
)
4490 size_t c
= dyn_rel
->relative_reloc_count();
4492 odyn
->add_constant((use_rel
4493 ? elfcpp::DT_RELCOUNT
4494 : elfcpp::DT_RELACOUNT
),
4499 if (add_debug
&& !parameters
->options().shared())
4501 // The value of the DT_DEBUG tag is filled in by the dynamic
4502 // linker at run time, and used by the debugger.
4503 odyn
->add_constant(elfcpp::DT_DEBUG
, 0);
4507 // Finish the .dynamic section and PT_DYNAMIC segment.
4510 Layout::finish_dynamic_section(const Input_objects
* input_objects
,
4511 const Symbol_table
* symtab
)
4513 if (!this->script_options_
->saw_phdrs_clause()
4514 && this->dynamic_section_
!= NULL
)
4516 Output_segment
* oseg
= this->make_output_segment(elfcpp::PT_DYNAMIC
,
4519 oseg
->add_output_section_to_nonload(this->dynamic_section_
,
4520 elfcpp::PF_R
| elfcpp::PF_W
);
4523 Output_data_dynamic
* const odyn
= this->dynamic_data_
;
4527 for (Input_objects::Dynobj_iterator p
= input_objects
->dynobj_begin();
4528 p
!= input_objects
->dynobj_end();
4531 if (!(*p
)->is_needed() && (*p
)->as_needed())
4533 // This dynamic object was linked with --as-needed, but it
4538 odyn
->add_string(elfcpp::DT_NEEDED
, (*p
)->soname());
4541 if (parameters
->options().shared())
4543 const char* soname
= parameters
->options().soname();
4545 odyn
->add_string(elfcpp::DT_SONAME
, soname
);
4548 Symbol
* sym
= symtab
->lookup(parameters
->options().init());
4549 if (sym
!= NULL
&& sym
->is_defined() && !sym
->is_from_dynobj())
4550 odyn
->add_symbol(elfcpp::DT_INIT
, sym
);
4552 sym
= symtab
->lookup(parameters
->options().fini());
4553 if (sym
!= NULL
&& sym
->is_defined() && !sym
->is_from_dynobj())
4554 odyn
->add_symbol(elfcpp::DT_FINI
, sym
);
4556 // Look for .init_array, .preinit_array and .fini_array by checking
4558 for(Layout::Section_list::const_iterator p
= this->section_list_
.begin();
4559 p
!= this->section_list_
.end();
4561 switch((*p
)->type())
4563 case elfcpp::SHT_FINI_ARRAY
:
4564 odyn
->add_section_address(elfcpp::DT_FINI_ARRAY
, *p
);
4565 odyn
->add_section_size(elfcpp::DT_FINI_ARRAYSZ
, *p
);
4567 case elfcpp::SHT_INIT_ARRAY
:
4568 odyn
->add_section_address(elfcpp::DT_INIT_ARRAY
, *p
);
4569 odyn
->add_section_size(elfcpp::DT_INIT_ARRAYSZ
, *p
);
4571 case elfcpp::SHT_PREINIT_ARRAY
:
4572 odyn
->add_section_address(elfcpp::DT_PREINIT_ARRAY
, *p
);
4573 odyn
->add_section_size(elfcpp::DT_PREINIT_ARRAYSZ
, *p
);
4579 // Add a DT_RPATH entry if needed.
4580 const General_options::Dir_list
& rpath(parameters
->options().rpath());
4583 std::string rpath_val
;
4584 for (General_options::Dir_list::const_iterator p
= rpath
.begin();
4588 if (rpath_val
.empty())
4589 rpath_val
= p
->name();
4592 // Eliminate duplicates.
4593 General_options::Dir_list::const_iterator q
;
4594 for (q
= rpath
.begin(); q
!= p
; ++q
)
4595 if (q
->name() == p
->name())
4600 rpath_val
+= p
->name();
4605 odyn
->add_string(elfcpp::DT_RPATH
, rpath_val
);
4606 if (parameters
->options().enable_new_dtags())
4607 odyn
->add_string(elfcpp::DT_RUNPATH
, rpath_val
);
4610 // Look for text segments that have dynamic relocations.
4611 bool have_textrel
= false;
4612 if (!this->script_options_
->saw_sections_clause())
4614 for (Segment_list::const_iterator p
= this->segment_list_
.begin();
4615 p
!= this->segment_list_
.end();
4618 if ((*p
)->type() == elfcpp::PT_LOAD
4619 && ((*p
)->flags() & elfcpp::PF_W
) == 0
4620 && (*p
)->has_dynamic_reloc())
4622 have_textrel
= true;
4629 // We don't know the section -> segment mapping, so we are
4630 // conservative and just look for readonly sections with
4631 // relocations. If those sections wind up in writable segments,
4632 // then we have created an unnecessary DT_TEXTREL entry.
4633 for (Section_list::const_iterator p
= this->section_list_
.begin();
4634 p
!= this->section_list_
.end();
4637 if (((*p
)->flags() & elfcpp::SHF_ALLOC
) != 0
4638 && ((*p
)->flags() & elfcpp::SHF_WRITE
) == 0
4639 && (*p
)->has_dynamic_reloc())
4641 have_textrel
= true;
4647 if (parameters
->options().filter() != NULL
)
4648 odyn
->add_string(elfcpp::DT_FILTER
, parameters
->options().filter());
4649 if (parameters
->options().any_auxiliary())
4651 for (options::String_set::const_iterator p
=
4652 parameters
->options().auxiliary_begin();
4653 p
!= parameters
->options().auxiliary_end();
4655 odyn
->add_string(elfcpp::DT_AUXILIARY
, *p
);
4658 // Add a DT_FLAGS entry if necessary.
4659 unsigned int flags
= 0;
4662 // Add a DT_TEXTREL for compatibility with older loaders.
4663 odyn
->add_constant(elfcpp::DT_TEXTREL
, 0);
4664 flags
|= elfcpp::DF_TEXTREL
;
4666 if (parameters
->options().text())
4667 gold_error(_("read-only segment has dynamic relocations"));
4668 else if (parameters
->options().warn_shared_textrel()
4669 && parameters
->options().shared())
4670 gold_warning(_("shared library text segment is not shareable"));
4672 if (parameters
->options().shared() && this->has_static_tls())
4673 flags
|= elfcpp::DF_STATIC_TLS
;
4674 if (parameters
->options().origin())
4675 flags
|= elfcpp::DF_ORIGIN
;
4676 if (parameters
->options().Bsymbolic())
4678 flags
|= elfcpp::DF_SYMBOLIC
;
4679 // Add DT_SYMBOLIC for compatibility with older loaders.
4680 odyn
->add_constant(elfcpp::DT_SYMBOLIC
, 0);
4682 if (parameters
->options().now())
4683 flags
|= elfcpp::DF_BIND_NOW
;
4685 odyn
->add_constant(elfcpp::DT_FLAGS
, flags
);
4688 if (parameters
->options().initfirst())
4689 flags
|= elfcpp::DF_1_INITFIRST
;
4690 if (parameters
->options().interpose())
4691 flags
|= elfcpp::DF_1_INTERPOSE
;
4692 if (parameters
->options().loadfltr())
4693 flags
|= elfcpp::DF_1_LOADFLTR
;
4694 if (parameters
->options().nodefaultlib())
4695 flags
|= elfcpp::DF_1_NODEFLIB
;
4696 if (parameters
->options().nodelete())
4697 flags
|= elfcpp::DF_1_NODELETE
;
4698 if (parameters
->options().nodlopen())
4699 flags
|= elfcpp::DF_1_NOOPEN
;
4700 if (parameters
->options().nodump())
4701 flags
|= elfcpp::DF_1_NODUMP
;
4702 if (!parameters
->options().shared())
4703 flags
&= ~(elfcpp::DF_1_INITFIRST
4704 | elfcpp::DF_1_NODELETE
4705 | elfcpp::DF_1_NOOPEN
);
4706 if (parameters
->options().origin())
4707 flags
|= elfcpp::DF_1_ORIGIN
;
4708 if (parameters
->options().now())
4709 flags
|= elfcpp::DF_1_NOW
;
4710 if (parameters
->options().Bgroup())
4711 flags
|= elfcpp::DF_1_GROUP
;
4713 odyn
->add_constant(elfcpp::DT_FLAGS_1
, flags
);
4716 // Set the size of the _DYNAMIC symbol table to be the size of the
4720 Layout::set_dynamic_symbol_size(const Symbol_table
* symtab
)
4722 Output_data_dynamic
* const odyn
= this->dynamic_data_
;
4725 odyn
->finalize_data_size();
4726 if (this->dynamic_symbol_
== NULL
)
4728 off_t data_size
= odyn
->data_size();
4729 const int size
= parameters
->target().get_size();
4731 symtab
->get_sized_symbol
<32>(this->dynamic_symbol_
)->set_symsize(data_size
);
4732 else if (size
== 64)
4733 symtab
->get_sized_symbol
<64>(this->dynamic_symbol_
)->set_symsize(data_size
);
4738 // The mapping of input section name prefixes to output section names.
4739 // In some cases one prefix is itself a prefix of another prefix; in
4740 // such a case the longer prefix must come first. These prefixes are
4741 // based on the GNU linker default ELF linker script.
4743 #define MAPPING_INIT(f, t) { f, sizeof(f) - 1, t, sizeof(t) - 1 }
4744 #define MAPPING_INIT_EXACT(f, t) { f, 0, t, sizeof(t) - 1 }
4745 const Layout::Section_name_mapping
Layout::section_name_mapping
[] =
4747 MAPPING_INIT(".text.", ".text"),
4748 MAPPING_INIT(".rodata.", ".rodata"),
4749 MAPPING_INIT(".data.rel.ro.local.", ".data.rel.ro.local"),
4750 MAPPING_INIT_EXACT(".data.rel.ro.local", ".data.rel.ro.local"),
4751 MAPPING_INIT(".data.rel.ro.", ".data.rel.ro"),
4752 MAPPING_INIT_EXACT(".data.rel.ro", ".data.rel.ro"),
4753 MAPPING_INIT(".data.", ".data"),
4754 MAPPING_INIT(".bss.", ".bss"),
4755 MAPPING_INIT(".tdata.", ".tdata"),
4756 MAPPING_INIT(".tbss.", ".tbss"),
4757 MAPPING_INIT(".init_array.", ".init_array"),
4758 MAPPING_INIT(".fini_array.", ".fini_array"),
4759 MAPPING_INIT(".sdata.", ".sdata"),
4760 MAPPING_INIT(".sbss.", ".sbss"),
4761 // FIXME: In the GNU linker, .sbss2 and .sdata2 are handled
4762 // differently depending on whether it is creating a shared library.
4763 MAPPING_INIT(".sdata2.", ".sdata"),
4764 MAPPING_INIT(".sbss2.", ".sbss"),
4765 MAPPING_INIT(".lrodata.", ".lrodata"),
4766 MAPPING_INIT(".ldata.", ".ldata"),
4767 MAPPING_INIT(".lbss.", ".lbss"),
4768 MAPPING_INIT(".gcc_except_table.", ".gcc_except_table"),
4769 MAPPING_INIT(".gnu.linkonce.d.rel.ro.local.", ".data.rel.ro.local"),
4770 MAPPING_INIT(".gnu.linkonce.d.rel.ro.", ".data.rel.ro"),
4771 MAPPING_INIT(".gnu.linkonce.t.", ".text"),
4772 MAPPING_INIT(".gnu.linkonce.r.", ".rodata"),
4773 MAPPING_INIT(".gnu.linkonce.d.", ".data"),
4774 MAPPING_INIT(".gnu.linkonce.b.", ".bss"),
4775 MAPPING_INIT(".gnu.linkonce.s.", ".sdata"),
4776 MAPPING_INIT(".gnu.linkonce.sb.", ".sbss"),
4777 MAPPING_INIT(".gnu.linkonce.s2.", ".sdata"),
4778 MAPPING_INIT(".gnu.linkonce.sb2.", ".sbss"),
4779 MAPPING_INIT(".gnu.linkonce.wi.", ".debug_info"),
4780 MAPPING_INIT(".gnu.linkonce.td.", ".tdata"),
4781 MAPPING_INIT(".gnu.linkonce.tb.", ".tbss"),
4782 MAPPING_INIT(".gnu.linkonce.lr.", ".lrodata"),
4783 MAPPING_INIT(".gnu.linkonce.l.", ".ldata"),
4784 MAPPING_INIT(".gnu.linkonce.lb.", ".lbss"),
4785 MAPPING_INIT(".ARM.extab", ".ARM.extab"),
4786 MAPPING_INIT(".gnu.linkonce.armextab.", ".ARM.extab"),
4787 MAPPING_INIT(".ARM.exidx", ".ARM.exidx"),
4788 MAPPING_INIT(".gnu.linkonce.armexidx.", ".ARM.exidx"),
4791 #undef MAPPING_INIT_EXACT
4793 const int Layout::section_name_mapping_count
=
4794 (sizeof(Layout::section_name_mapping
)
4795 / sizeof(Layout::section_name_mapping
[0]));
4797 // Choose the output section name to use given an input section name.
4798 // Set *PLEN to the length of the name. *PLEN is initialized to the
4802 Layout::output_section_name(const Relobj
* relobj
, const char* name
,
4805 // gcc 4.3 generates the following sorts of section names when it
4806 // needs a section name specific to a function:
4812 // .data.rel.local.FN
4814 // .data.rel.ro.local.FN
4821 // The GNU linker maps all of those to the part before the .FN,
4822 // except that .data.rel.local.FN is mapped to .data, and
4823 // .data.rel.ro.local.FN is mapped to .data.rel.ro. The sections
4824 // beginning with .data.rel.ro.local are grouped together.
4826 // For an anonymous namespace, the string FN can contain a '.'.
4828 // Also of interest: .rodata.strN.N, .rodata.cstN, both of which the
4829 // GNU linker maps to .rodata.
4831 // The .data.rel.ro sections are used with -z relro. The sections
4832 // are recognized by name. We use the same names that the GNU
4833 // linker does for these sections.
4835 // It is hard to handle this in a principled way, so we don't even
4836 // try. We use a table of mappings. If the input section name is
4837 // not found in the table, we simply use it as the output section
4840 const Section_name_mapping
* psnm
= section_name_mapping
;
4841 for (int i
= 0; i
< section_name_mapping_count
; ++i
, ++psnm
)
4843 if (psnm
->fromlen
> 0)
4845 if (strncmp(name
, psnm
->from
, psnm
->fromlen
) == 0)
4847 *plen
= psnm
->tolen
;
4853 if (strcmp(name
, psnm
->from
) == 0)
4855 *plen
= psnm
->tolen
;
4861 // As an additional complication, .ctors sections are output in
4862 // either .ctors or .init_array sections, and .dtors sections are
4863 // output in either .dtors or .fini_array sections.
4864 if (is_prefix_of(".ctors.", name
) || is_prefix_of(".dtors.", name
))
4866 if (parameters
->options().ctors_in_init_array())
4869 return name
[1] == 'c' ? ".init_array" : ".fini_array";
4874 return name
[1] == 'c' ? ".ctors" : ".dtors";
4877 if (parameters
->options().ctors_in_init_array()
4878 && (strcmp(name
, ".ctors") == 0 || strcmp(name
, ".dtors") == 0))
4880 // To make .init_array/.fini_array work with gcc we must exclude
4881 // .ctors and .dtors sections from the crtbegin and crtend
4884 || (!Layout::match_file_name(relobj
, "crtbegin")
4885 && !Layout::match_file_name(relobj
, "crtend")))
4888 return name
[1] == 'c' ? ".init_array" : ".fini_array";
4895 // Return true if RELOBJ is an input file whose base name matches
4896 // FILE_NAME. The base name must have an extension of ".o", and must
4897 // be exactly FILE_NAME.o or FILE_NAME, one character, ".o". This is
4898 // to match crtbegin.o as well as crtbeginS.o without getting confused
4899 // by other possibilities. Overall matching the file name this way is
4900 // a dreadful hack, but the GNU linker does it in order to better
4901 // support gcc, and we need to be compatible.
4904 Layout::match_file_name(const Relobj
* relobj
, const char* match
)
4906 const std::string
& file_name(relobj
->name());
4907 const char* base_name
= lbasename(file_name
.c_str());
4908 size_t match_len
= strlen(match
);
4909 if (strncmp(base_name
, match
, match_len
) != 0)
4911 size_t base_len
= strlen(base_name
);
4912 if (base_len
!= match_len
+ 2 && base_len
!= match_len
+ 3)
4914 return memcmp(base_name
+ base_len
- 2, ".o", 2) == 0;
4917 // Check if a comdat group or .gnu.linkonce section with the given
4918 // NAME is selected for the link. If there is already a section,
4919 // *KEPT_SECTION is set to point to the existing section and the
4920 // function returns false. Otherwise, OBJECT, SHNDX, IS_COMDAT, and
4921 // IS_GROUP_NAME are recorded for this NAME in the layout object,
4922 // *KEPT_SECTION is set to the internal copy and the function returns
4926 Layout::find_or_add_kept_section(const std::string
& name
,
4931 Kept_section
** kept_section
)
4933 // It's normal to see a couple of entries here, for the x86 thunk
4934 // sections. If we see more than a few, we're linking a C++
4935 // program, and we resize to get more space to minimize rehashing.
4936 if (this->signatures_
.size() > 4
4937 && !this->resized_signatures_
)
4939 reserve_unordered_map(&this->signatures_
,
4940 this->number_of_input_files_
* 64);
4941 this->resized_signatures_
= true;
4944 Kept_section candidate
;
4945 std::pair
<Signatures::iterator
, bool> ins
=
4946 this->signatures_
.insert(std::make_pair(name
, candidate
));
4948 if (kept_section
!= NULL
)
4949 *kept_section
= &ins
.first
->second
;
4952 // This is the first time we've seen this signature.
4953 ins
.first
->second
.set_object(object
);
4954 ins
.first
->second
.set_shndx(shndx
);
4956 ins
.first
->second
.set_is_comdat();
4958 ins
.first
->second
.set_is_group_name();
4962 // We have already seen this signature.
4964 if (ins
.first
->second
.is_group_name())
4966 // We've already seen a real section group with this signature.
4967 // If the kept group is from a plugin object, and we're in the
4968 // replacement phase, accept the new one as a replacement.
4969 if (ins
.first
->second
.object() == NULL
4970 && parameters
->options().plugins()->in_replacement_phase())
4972 ins
.first
->second
.set_object(object
);
4973 ins
.first
->second
.set_shndx(shndx
);
4978 else if (is_group_name
)
4980 // This is a real section group, and we've already seen a
4981 // linkonce section with this signature. Record that we've seen
4982 // a section group, and don't include this section group.
4983 ins
.first
->second
.set_is_group_name();
4988 // We've already seen a linkonce section and this is a linkonce
4989 // section. These don't block each other--this may be the same
4990 // symbol name with different section types.
4995 // Store the allocated sections into the section list.
4998 Layout::get_allocated_sections(Section_list
* section_list
) const
5000 for (Section_list::const_iterator p
= this->section_list_
.begin();
5001 p
!= this->section_list_
.end();
5003 if (((*p
)->flags() & elfcpp::SHF_ALLOC
) != 0)
5004 section_list
->push_back(*p
);
5007 // Create an output segment.
5010 Layout::make_output_segment(elfcpp::Elf_Word type
, elfcpp::Elf_Word flags
)
5012 gold_assert(!parameters
->options().relocatable());
5013 Output_segment
* oseg
= new Output_segment(type
, flags
);
5014 this->segment_list_
.push_back(oseg
);
5016 if (type
== elfcpp::PT_TLS
)
5017 this->tls_segment_
= oseg
;
5018 else if (type
== elfcpp::PT_GNU_RELRO
)
5019 this->relro_segment_
= oseg
;
5020 else if (type
== elfcpp::PT_INTERP
)
5021 this->interp_segment_
= oseg
;
5026 // Return the file offset of the normal symbol table.
5029 Layout::symtab_section_offset() const
5031 if (this->symtab_section_
!= NULL
)
5032 return this->symtab_section_
->offset();
5036 // Return the section index of the normal symbol table. It may have
5037 // been stripped by the -s/--strip-all option.
5040 Layout::symtab_section_shndx() const
5042 if (this->symtab_section_
!= NULL
)
5043 return this->symtab_section_
->out_shndx();
5047 // Write out the Output_sections. Most won't have anything to write,
5048 // since most of the data will come from input sections which are
5049 // handled elsewhere. But some Output_sections do have Output_data.
5052 Layout::write_output_sections(Output_file
* of
) const
5054 for (Section_list::const_iterator p
= this->section_list_
.begin();
5055 p
!= this->section_list_
.end();
5058 if (!(*p
)->after_input_sections())
5063 // Write out data not associated with a section or the symbol table.
5066 Layout::write_data(const Symbol_table
* symtab
, Output_file
* of
) const
5068 if (!parameters
->options().strip_all())
5070 const Output_section
* symtab_section
= this->symtab_section_
;
5071 for (Section_list::const_iterator p
= this->section_list_
.begin();
5072 p
!= this->section_list_
.end();
5075 if ((*p
)->needs_symtab_index())
5077 gold_assert(symtab_section
!= NULL
);
5078 unsigned int index
= (*p
)->symtab_index();
5079 gold_assert(index
> 0 && index
!= -1U);
5080 off_t off
= (symtab_section
->offset()
5081 + index
* symtab_section
->entsize());
5082 symtab
->write_section_symbol(*p
, this->symtab_xindex_
, of
, off
);
5087 const Output_section
* dynsym_section
= this->dynsym_section_
;
5088 for (Section_list::const_iterator p
= this->section_list_
.begin();
5089 p
!= this->section_list_
.end();
5092 if ((*p
)->needs_dynsym_index())
5094 gold_assert(dynsym_section
!= NULL
);
5095 unsigned int index
= (*p
)->dynsym_index();
5096 gold_assert(index
> 0 && index
!= -1U);
5097 off_t off
= (dynsym_section
->offset()
5098 + index
* dynsym_section
->entsize());
5099 symtab
->write_section_symbol(*p
, this->dynsym_xindex_
, of
, off
);
5103 // Write out the Output_data which are not in an Output_section.
5104 for (Data_list::const_iterator p
= this->special_output_list_
.begin();
5105 p
!= this->special_output_list_
.end();
5110 // Write out the Output_sections which can only be written after the
5111 // input sections are complete.
5114 Layout::write_sections_after_input_sections(Output_file
* of
)
5116 // Determine the final section offsets, and thus the final output
5117 // file size. Note we finalize the .shstrab last, to allow the
5118 // after_input_section sections to modify their section-names before
5120 if (this->any_postprocessing_sections_
)
5122 off_t off
= this->output_file_size_
;
5123 off
= this->set_section_offsets(off
, POSTPROCESSING_SECTIONS_PASS
);
5125 // Now that we've finalized the names, we can finalize the shstrab.
5127 this->set_section_offsets(off
,
5128 STRTAB_AFTER_POSTPROCESSING_SECTIONS_PASS
);
5130 if (off
> this->output_file_size_
)
5133 this->output_file_size_
= off
;
5137 for (Section_list::const_iterator p
= this->section_list_
.begin();
5138 p
!= this->section_list_
.end();
5141 if ((*p
)->after_input_sections())
5145 this->section_headers_
->write(of
);
5148 // If the build ID requires computing a checksum, do so here, and
5149 // write it out. We compute a checksum over the entire file because
5150 // that is simplest.
5153 Layout::write_build_id(Output_file
* of
) const
5155 if (this->build_id_note_
== NULL
)
5158 const unsigned char* iv
= of
->get_input_view(0, this->output_file_size_
);
5160 unsigned char* ov
= of
->get_output_view(this->build_id_note_
->offset(),
5161 this->build_id_note_
->data_size());
5163 const char* style
= parameters
->options().build_id();
5164 if (strcmp(style
, "sha1") == 0)
5167 sha1_init_ctx(&ctx
);
5168 sha1_process_bytes(iv
, this->output_file_size_
, &ctx
);
5169 sha1_finish_ctx(&ctx
, ov
);
5171 else if (strcmp(style
, "md5") == 0)
5175 md5_process_bytes(iv
, this->output_file_size_
, &ctx
);
5176 md5_finish_ctx(&ctx
, ov
);
5181 of
->write_output_view(this->build_id_note_
->offset(),
5182 this->build_id_note_
->data_size(),
5185 of
->free_input_view(0, this->output_file_size_
, iv
);
5188 // Write out a binary file. This is called after the link is
5189 // complete. IN is the temporary output file we used to generate the
5190 // ELF code. We simply walk through the segments, read them from
5191 // their file offset in IN, and write them to their load address in
5192 // the output file. FIXME: with a bit more work, we could support
5193 // S-records and/or Intel hex format here.
5196 Layout::write_binary(Output_file
* in
) const
5198 gold_assert(parameters
->options().oformat_enum()
5199 == General_options::OBJECT_FORMAT_BINARY
);
5201 // Get the size of the binary file.
5202 uint64_t max_load_address
= 0;
5203 for (Segment_list::const_iterator p
= this->segment_list_
.begin();
5204 p
!= this->segment_list_
.end();
5207 if ((*p
)->type() == elfcpp::PT_LOAD
&& (*p
)->filesz() > 0)
5209 uint64_t max_paddr
= (*p
)->paddr() + (*p
)->filesz();
5210 if (max_paddr
> max_load_address
)
5211 max_load_address
= max_paddr
;
5215 Output_file
out(parameters
->options().output_file_name());
5216 out
.open(max_load_address
);
5218 for (Segment_list::const_iterator p
= this->segment_list_
.begin();
5219 p
!= this->segment_list_
.end();
5222 if ((*p
)->type() == elfcpp::PT_LOAD
&& (*p
)->filesz() > 0)
5224 const unsigned char* vin
= in
->get_input_view((*p
)->offset(),
5226 unsigned char* vout
= out
.get_output_view((*p
)->paddr(),
5228 memcpy(vout
, vin
, (*p
)->filesz());
5229 out
.write_output_view((*p
)->paddr(), (*p
)->filesz(), vout
);
5230 in
->free_input_view((*p
)->offset(), (*p
)->filesz(), vin
);
5237 // Print the output sections to the map file.
5240 Layout::print_to_mapfile(Mapfile
* mapfile
) const
5242 for (Segment_list::const_iterator p
= this->segment_list_
.begin();
5243 p
!= this->segment_list_
.end();
5245 (*p
)->print_sections_to_mapfile(mapfile
);
5248 // Print statistical information to stderr. This is used for --stats.
5251 Layout::print_stats() const
5253 this->namepool_
.print_stats("section name pool");
5254 this->sympool_
.print_stats("output symbol name pool");
5255 this->dynpool_
.print_stats("dynamic name pool");
5257 for (Section_list::const_iterator p
= this->section_list_
.begin();
5258 p
!= this->section_list_
.end();
5260 (*p
)->print_merge_stats();
5263 // Write_sections_task methods.
5265 // We can always run this task.
5268 Write_sections_task::is_runnable()
5273 // We need to unlock both OUTPUT_SECTIONS_BLOCKER and FINAL_BLOCKER
5277 Write_sections_task::locks(Task_locker
* tl
)
5279 tl
->add(this, this->output_sections_blocker_
);
5280 tl
->add(this, this->final_blocker_
);
5283 // Run the task--write out the data.
5286 Write_sections_task::run(Workqueue
*)
5288 this->layout_
->write_output_sections(this->of_
);
5291 // Write_data_task methods.
5293 // We can always run this task.
5296 Write_data_task::is_runnable()
5301 // We need to unlock FINAL_BLOCKER when finished.
5304 Write_data_task::locks(Task_locker
* tl
)
5306 tl
->add(this, this->final_blocker_
);
5309 // Run the task--write out the data.
5312 Write_data_task::run(Workqueue
*)
5314 this->layout_
->write_data(this->symtab_
, this->of_
);
5317 // Write_symbols_task methods.
5319 // We can always run this task.
5322 Write_symbols_task::is_runnable()
5327 // We need to unlock FINAL_BLOCKER when finished.
5330 Write_symbols_task::locks(Task_locker
* tl
)
5332 tl
->add(this, this->final_blocker_
);
5335 // Run the task--write out the symbols.
5338 Write_symbols_task::run(Workqueue
*)
5340 this->symtab_
->write_globals(this->sympool_
, this->dynpool_
,
5341 this->layout_
->symtab_xindex(),
5342 this->layout_
->dynsym_xindex(), this->of_
);
5345 // Write_after_input_sections_task methods.
5347 // We can only run this task after the input sections have completed.
5350 Write_after_input_sections_task::is_runnable()
5352 if (this->input_sections_blocker_
->is_blocked())
5353 return this->input_sections_blocker_
;
5357 // We need to unlock FINAL_BLOCKER when finished.
5360 Write_after_input_sections_task::locks(Task_locker
* tl
)
5362 tl
->add(this, this->final_blocker_
);
5368 Write_after_input_sections_task::run(Workqueue
*)
5370 this->layout_
->write_sections_after_input_sections(this->of_
);
5373 // Close_task_runner methods.
5375 // Run the task--close the file.
5378 Close_task_runner::run(Workqueue
*, const Task
*)
5380 // If we need to compute a checksum for the BUILD if, we do so here.
5381 this->layout_
->write_build_id(this->of_
);
5383 // If we've been asked to create a binary file, we do so here.
5384 if (this->options_
->oformat_enum() != General_options::OBJECT_FORMAT_ELF
)
5385 this->layout_
->write_binary(this->of_
);
5390 // Instantiate the templates we need. We could use the configure
5391 // script to restrict this to only the ones for implemented targets.
5393 #ifdef HAVE_TARGET_32_LITTLE
5396 Layout::init_fixed_output_section
<32, false>(
5398 elfcpp::Shdr
<32, false>& shdr
);
5401 #ifdef HAVE_TARGET_32_BIG
5404 Layout::init_fixed_output_section
<32, true>(
5406 elfcpp::Shdr
<32, true>& shdr
);
5409 #ifdef HAVE_TARGET_64_LITTLE
5412 Layout::init_fixed_output_section
<64, false>(
5414 elfcpp::Shdr
<64, false>& shdr
);
5417 #ifdef HAVE_TARGET_64_BIG
5420 Layout::init_fixed_output_section
<64, true>(
5422 elfcpp::Shdr
<64, true>& shdr
);
5425 #ifdef HAVE_TARGET_32_LITTLE
5428 Layout::layout
<32, false>(Sized_relobj_file
<32, false>* object
,
5431 const elfcpp::Shdr
<32, false>& shdr
,
5432 unsigned int, unsigned int, off_t
*);
5435 #ifdef HAVE_TARGET_32_BIG
5438 Layout::layout
<32, true>(Sized_relobj_file
<32, true>* object
,
5441 const elfcpp::Shdr
<32, true>& shdr
,
5442 unsigned int, unsigned int, off_t
*);
5445 #ifdef HAVE_TARGET_64_LITTLE
5448 Layout::layout
<64, false>(Sized_relobj_file
<64, false>* object
,
5451 const elfcpp::Shdr
<64, false>& shdr
,
5452 unsigned int, unsigned int, off_t
*);
5455 #ifdef HAVE_TARGET_64_BIG
5458 Layout::layout
<64, true>(Sized_relobj_file
<64, true>* object
,
5461 const elfcpp::Shdr
<64, true>& shdr
,
5462 unsigned int, unsigned int, off_t
*);
5465 #ifdef HAVE_TARGET_32_LITTLE
5468 Layout::layout_reloc
<32, false>(Sized_relobj_file
<32, false>* object
,
5469 unsigned int reloc_shndx
,
5470 const elfcpp::Shdr
<32, false>& shdr
,
5471 Output_section
* data_section
,
5472 Relocatable_relocs
* rr
);
5475 #ifdef HAVE_TARGET_32_BIG
5478 Layout::layout_reloc
<32, true>(Sized_relobj_file
<32, true>* object
,
5479 unsigned int reloc_shndx
,
5480 const elfcpp::Shdr
<32, true>& shdr
,
5481 Output_section
* data_section
,
5482 Relocatable_relocs
* rr
);
5485 #ifdef HAVE_TARGET_64_LITTLE
5488 Layout::layout_reloc
<64, false>(Sized_relobj_file
<64, false>* object
,
5489 unsigned int reloc_shndx
,
5490 const elfcpp::Shdr
<64, false>& shdr
,
5491 Output_section
* data_section
,
5492 Relocatable_relocs
* rr
);
5495 #ifdef HAVE_TARGET_64_BIG
5498 Layout::layout_reloc
<64, true>(Sized_relobj_file
<64, true>* object
,
5499 unsigned int reloc_shndx
,
5500 const elfcpp::Shdr
<64, true>& shdr
,
5501 Output_section
* data_section
,
5502 Relocatable_relocs
* rr
);
5505 #ifdef HAVE_TARGET_32_LITTLE
5508 Layout::layout_group
<32, false>(Symbol_table
* symtab
,
5509 Sized_relobj_file
<32, false>* object
,
5511 const char* group_section_name
,
5512 const char* signature
,
5513 const elfcpp::Shdr
<32, false>& shdr
,
5514 elfcpp::Elf_Word flags
,
5515 std::vector
<unsigned int>* shndxes
);
5518 #ifdef HAVE_TARGET_32_BIG
5521 Layout::layout_group
<32, true>(Symbol_table
* symtab
,
5522 Sized_relobj_file
<32, true>* object
,
5524 const char* group_section_name
,
5525 const char* signature
,
5526 const elfcpp::Shdr
<32, true>& shdr
,
5527 elfcpp::Elf_Word flags
,
5528 std::vector
<unsigned int>* shndxes
);
5531 #ifdef HAVE_TARGET_64_LITTLE
5534 Layout::layout_group
<64, false>(Symbol_table
* symtab
,
5535 Sized_relobj_file
<64, false>* object
,
5537 const char* group_section_name
,
5538 const char* signature
,
5539 const elfcpp::Shdr
<64, false>& shdr
,
5540 elfcpp::Elf_Word flags
,
5541 std::vector
<unsigned int>* shndxes
);
5544 #ifdef HAVE_TARGET_64_BIG
5547 Layout::layout_group
<64, true>(Symbol_table
* symtab
,
5548 Sized_relobj_file
<64, true>* object
,
5550 const char* group_section_name
,
5551 const char* signature
,
5552 const elfcpp::Shdr
<64, true>& shdr
,
5553 elfcpp::Elf_Word flags
,
5554 std::vector
<unsigned int>* shndxes
);
5557 #ifdef HAVE_TARGET_32_LITTLE
5560 Layout::layout_eh_frame
<32, false>(Sized_relobj_file
<32, false>* object
,
5561 const unsigned char* symbols
,
5563 const unsigned char* symbol_names
,
5564 off_t symbol_names_size
,
5566 const elfcpp::Shdr
<32, false>& shdr
,
5567 unsigned int reloc_shndx
,
5568 unsigned int reloc_type
,
5572 #ifdef HAVE_TARGET_32_BIG
5575 Layout::layout_eh_frame
<32, true>(Sized_relobj_file
<32, true>* object
,
5576 const unsigned char* symbols
,
5578 const unsigned char* symbol_names
,
5579 off_t symbol_names_size
,
5581 const elfcpp::Shdr
<32, true>& shdr
,
5582 unsigned int reloc_shndx
,
5583 unsigned int reloc_type
,
5587 #ifdef HAVE_TARGET_64_LITTLE
5590 Layout::layout_eh_frame
<64, false>(Sized_relobj_file
<64, false>* object
,
5591 const unsigned char* symbols
,
5593 const unsigned char* symbol_names
,
5594 off_t symbol_names_size
,
5596 const elfcpp::Shdr
<64, false>& shdr
,
5597 unsigned int reloc_shndx
,
5598 unsigned int reloc_type
,
5602 #ifdef HAVE_TARGET_64_BIG
5605 Layout::layout_eh_frame
<64, true>(Sized_relobj_file
<64, true>* object
,
5606 const unsigned char* symbols
,
5608 const unsigned char* symbol_names
,
5609 off_t symbol_names_size
,
5611 const elfcpp::Shdr
<64, true>& shdr
,
5612 unsigned int reloc_shndx
,
5613 unsigned int reloc_type
,
5617 #ifdef HAVE_TARGET_32_LITTLE
5620 Layout::add_to_gdb_index(bool is_type_unit
,
5621 Sized_relobj
<32, false>* object
,
5622 const unsigned char* symbols
,
5625 unsigned int reloc_shndx
,
5626 unsigned int reloc_type
);
5629 #ifdef HAVE_TARGET_32_BIG
5632 Layout::add_to_gdb_index(bool is_type_unit
,
5633 Sized_relobj
<32, true>* object
,
5634 const unsigned char* symbols
,
5637 unsigned int reloc_shndx
,
5638 unsigned int reloc_type
);
5641 #ifdef HAVE_TARGET_64_LITTLE
5644 Layout::add_to_gdb_index(bool is_type_unit
,
5645 Sized_relobj
<64, false>* object
,
5646 const unsigned char* symbols
,
5649 unsigned int reloc_shndx
,
5650 unsigned int reloc_type
);
5653 #ifdef HAVE_TARGET_64_BIG
5656 Layout::add_to_gdb_index(bool is_type_unit
,
5657 Sized_relobj
<64, true>* object
,
5658 const unsigned char* symbols
,
5661 unsigned int reloc_shndx
,
5662 unsigned int reloc_type
);
5665 } // End namespace gold.