*** empty log message ***
[deliverable/binutils-gdb.git] / gprof / hist.c
1 /* hist.c - Histogram related operations.
2
3 Copyright 2000, 2001, 2002 Free Software Foundation, Inc.
4
5 This file is part of GNU Binutils.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
20 02111-1307, USA. */
21 \f
22 #include "libiberty.h"
23 #include "gprof.h"
24 #include "search_list.h"
25 #include "source.h"
26 #include "symtab.h"
27 #include "corefile.h"
28 #include "gmon_io.h"
29 #include "gmon_out.h"
30 #include "hist.h"
31 #include "sym_ids.h"
32 #include "utils.h"
33
34 #define UNITS_TO_CODE (offset_to_code / sizeof(UNIT))
35
36 static void scale_and_align_entries (void);
37 static void print_header (int);
38 static void print_line (Sym *, double);
39 static int cmp_time (const PTR, const PTR);
40
41 /* Declarations of automatically generated functions to output blurbs. */
42 extern void flat_blurb (FILE * fp);
43
44 bfd_vma s_lowpc; /* Lowest address in .text. */
45 bfd_vma s_highpc = 0; /* Highest address in .text. */
46 bfd_vma lowpc, highpc; /* Same, but expressed in UNITs. */
47 int hist_num_bins = 0; /* Number of histogram samples. */
48 int *hist_sample = 0; /* Histogram samples (shorts in the file!). */
49 double hist_scale;
50 char hist_dimension[16] = "seconds";
51 char hist_dimension_abbrev = 's';
52
53 static double accum_time; /* Accumulated time so far for print_line(). */
54 static double total_time; /* Total time for all routines. */
55
56 /* Table of SI prefixes for powers of 10 (used to automatically
57 scale some of the values in the flat profile). */
58 const struct
59 {
60 char prefix;
61 double scale;
62 }
63 SItab[] =
64 {
65 { 'T', 1e-12 }, /* tera */
66 { 'G', 1e-09 }, /* giga */
67 { 'M', 1e-06 }, /* mega */
68 { 'K', 1e-03 }, /* kilo */
69 { ' ', 1e-00 },
70 { 'm', 1e+03 }, /* milli */
71 { 'u', 1e+06 }, /* micro */
72 { 'n', 1e+09 }, /* nano */
73 { 'p', 1e+12 }, /* pico */
74 { 'f', 1e+15 }, /* femto */
75 { 'a', 1e+18 } /* ato */
76 };
77
78
79 /* Read the histogram from file IFP. FILENAME is the name of IFP and
80 is provided for formatting error messages only. */
81
82 void
83 hist_read_rec (FILE * ifp, const char *filename)
84 {
85 bfd_vma n_lowpc, n_highpc;
86 int i, ncnt, profrate;
87 UNIT count;
88
89 if (gmon_io_read_vma (ifp, &n_lowpc)
90 || gmon_io_read_vma (ifp, &n_highpc)
91 || gmon_io_read_32 (ifp, &ncnt)
92 || gmon_io_read_32 (ifp, &profrate)
93 || gmon_io_read (ifp, hist_dimension, 15)
94 || gmon_io_read (ifp, &hist_dimension_abbrev, 1))
95 {
96 fprintf (stderr, _("%s: %s: unexpected end of file\n"),
97 whoami, filename);
98
99 done (1);
100 }
101
102 if (!s_highpc)
103 {
104 /* This is the first histogram record. */
105 s_lowpc = n_lowpc;
106 s_highpc = n_highpc;
107 lowpc = (bfd_vma) n_lowpc / sizeof (UNIT);
108 highpc = (bfd_vma) n_highpc / sizeof (UNIT);
109 hist_num_bins = ncnt;
110 hz = profrate;
111 }
112
113 DBG (SAMPLEDEBUG,
114 printf ("[hist_read_rec] n_lowpc 0x%lx n_highpc 0x%lx ncnt %d\n",
115 (unsigned long) n_lowpc, (unsigned long) n_highpc, ncnt);
116 printf ("[hist_read_rec] s_lowpc 0x%lx s_highpc 0x%lx nsamples %d\n",
117 (unsigned long) s_lowpc, (unsigned long) s_highpc,
118 hist_num_bins);
119 printf ("[hist_read_rec] lowpc 0x%lx highpc 0x%lx\n",
120 (unsigned long) lowpc, (unsigned long) highpc));
121
122 if (n_lowpc != s_lowpc || n_highpc != s_highpc
123 || ncnt != hist_num_bins || hz != profrate)
124 {
125 fprintf (stderr, _("%s: `%s' is incompatible with first gmon file\n"),
126 whoami, filename);
127 done (1);
128 }
129
130 if (!hist_sample)
131 {
132 hist_sample = (int *) xmalloc (hist_num_bins * sizeof (hist_sample[0]));
133 memset (hist_sample, 0, hist_num_bins * sizeof (hist_sample[0]));
134 }
135
136 for (i = 0; i < hist_num_bins; ++i)
137 {
138 if (fread (&count[0], sizeof (count), 1, ifp) != 1)
139 {
140 fprintf (stderr,
141 _("%s: %s: unexpected EOF after reading %d of %d samples\n"),
142 whoami, filename, i, hist_num_bins);
143 done (1);
144 }
145 hist_sample[i] += bfd_get_16 (core_bfd, (bfd_byte *) & count[0]);
146 DBG (SAMPLEDEBUG,
147 printf ("[hist_read_rec] 0x%lx: %u\n",
148 (unsigned long) (n_lowpc + i * (n_highpc - n_lowpc) / ncnt),
149 hist_sample[i]));
150 }
151 }
152
153
154 /* Write execution histogram to file OFP. FILENAME is the name
155 of OFP and is provided for formatting error-messages only. */
156
157 void
158 hist_write_hist (FILE * ofp, const char *filename)
159 {
160 UNIT count;
161 int i;
162
163 /* Write header. */
164
165 if (gmon_io_write_8 (ofp, GMON_TAG_TIME_HIST)
166 || gmon_io_write_vma (ofp, s_lowpc)
167 || gmon_io_write_vma (ofp, s_highpc)
168 || gmon_io_write_32 (ofp, hist_num_bins)
169 || gmon_io_write_32 (ofp, hz)
170 || gmon_io_write (ofp, hist_dimension, 15)
171 || gmon_io_write (ofp, &hist_dimension_abbrev, 1))
172 {
173 perror (filename);
174 done (1);
175 }
176
177 for (i = 0; i < hist_num_bins; ++i)
178 {
179 bfd_put_16 (core_bfd, (bfd_vma) hist_sample[i], (bfd_byte *) &count[0]);
180
181 if (fwrite (&count[0], sizeof (count), 1, ofp) != 1)
182 {
183 perror (filename);
184 done (1);
185 }
186 }
187 }
188
189
190 /* Calculate scaled entry point addresses (to save time in
191 hist_assign_samples), and, on architectures that have procedure
192 entry masks at the start of a function, possibly push the scaled
193 entry points over the procedure entry mask, if it turns out that
194 the entry point is in one bin and the code for a routine is in the
195 next bin. */
196
197 static void
198 scale_and_align_entries ()
199 {
200 Sym *sym;
201 bfd_vma bin_of_entry;
202 bfd_vma bin_of_code;
203
204 for (sym = symtab.base; sym < symtab.limit; sym++)
205 {
206 sym->hist.scaled_addr = sym->addr / sizeof (UNIT);
207 bin_of_entry = (sym->hist.scaled_addr - lowpc) / hist_scale;
208 bin_of_code = ((sym->hist.scaled_addr + UNITS_TO_CODE - lowpc)
209 / hist_scale);
210 if (bin_of_entry < bin_of_code)
211 {
212 DBG (SAMPLEDEBUG,
213 printf ("[scale_and_align_entries] pushing 0x%lx to 0x%lx\n",
214 (unsigned long) sym->hist.scaled_addr,
215 (unsigned long) (sym->hist.scaled_addr
216 + UNITS_TO_CODE)));
217 sym->hist.scaled_addr += UNITS_TO_CODE;
218 }
219 }
220 }
221
222
223 /* Assign samples to the symbol to which they belong.
224
225 Histogram bin I covers some address range [BIN_LOWPC,BIN_HIGH_PC)
226 which may overlap one more symbol address ranges. If a symbol
227 overlaps with the bin's address range by O percent, then O percent
228 of the bin's count is credited to that symbol.
229
230 There are three cases as to where BIN_LOW_PC and BIN_HIGH_PC can be
231 with respect to the symbol's address range [SYM_LOW_PC,
232 SYM_HIGH_PC) as shown in the following diagram. OVERLAP computes
233 the distance (in UNITs) between the arrows, the fraction of the
234 sample that is to be credited to the symbol which starts at
235 SYM_LOW_PC.
236
237 sym_low_pc sym_high_pc
238 | |
239 v v
240
241 +-----------------------------------------------+
242 | |
243 | ->| |<- ->| |<- ->| |<- |
244 | | | | | |
245 +---------+ +---------+ +---------+
246
247 ^ ^ ^ ^ ^ ^
248 | | | | | |
249 bin_low_pc bin_high_pc bin_low_pc bin_high_pc bin_low_pc bin_high_pc
250
251 For the VAX we assert that samples will never fall in the first two
252 bytes of any routine, since that is the entry mask, thus we call
253 scale_and_align_entries() to adjust the entry points if the entry
254 mask falls in one bin but the code for the routine doesn't start
255 until the next bin. In conjunction with the alignment of routine
256 addresses, this should allow us to have only one sample for every
257 four bytes of text space and never have any overlap (the two end
258 cases, above). */
259
260 void
261 hist_assign_samples ()
262 {
263 bfd_vma bin_low_pc, bin_high_pc;
264 bfd_vma sym_low_pc, sym_high_pc;
265 bfd_vma overlap, addr;
266 int bin_count, i;
267 unsigned int j;
268 double time, credit;
269
270 /* Read samples and assign to symbols. */
271 hist_scale = highpc - lowpc;
272 hist_scale /= hist_num_bins;
273 scale_and_align_entries ();
274
275 /* Iterate over all sample bins. */
276 for (i = 0, j = 1; i < hist_num_bins; ++i)
277 {
278 bin_count = hist_sample[i];
279 if (! bin_count)
280 continue;
281
282 bin_low_pc = lowpc + (bfd_vma) (hist_scale * i);
283 bin_high_pc = lowpc + (bfd_vma) (hist_scale * (i + 1));
284 time = bin_count;
285
286 DBG (SAMPLEDEBUG,
287 printf (
288 "[assign_samples] bin_low_pc=0x%lx, bin_high_pc=0x%lx, bin_count=%d\n",
289 (unsigned long) (sizeof (UNIT) * bin_low_pc),
290 (unsigned long) (sizeof (UNIT) * bin_high_pc),
291 bin_count));
292 total_time += time;
293
294 /* Credit all symbols that are covered by bin I. */
295 for (j = j - 1; j < symtab.len; ++j)
296 {
297 sym_low_pc = symtab.base[j].hist.scaled_addr;
298 sym_high_pc = symtab.base[j + 1].hist.scaled_addr;
299
300 /* If high end of bin is below entry address,
301 go for next bin. */
302 if (bin_high_pc < sym_low_pc)
303 break;
304
305 /* If low end of bin is above high end of symbol,
306 go for next symbol. */
307 if (bin_low_pc >= sym_high_pc)
308 continue;
309
310 overlap =
311 MIN (bin_high_pc, sym_high_pc) - MAX (bin_low_pc, sym_low_pc);
312 if (overlap > 0)
313 {
314 DBG (SAMPLEDEBUG,
315 printf (
316 "[assign_samples] [0x%lx,0x%lx) %s gets %f ticks %ld overlap\n",
317 (unsigned long) symtab.base[j].addr,
318 (unsigned long) (sizeof (UNIT) * sym_high_pc),
319 symtab.base[j].name, overlap * time / hist_scale,
320 (long) overlap));
321
322 addr = symtab.base[j].addr;
323 credit = overlap * time / hist_scale;
324
325 /* Credit symbol if it appears in INCL_FLAT or that
326 table is empty and it does not appear it in
327 EXCL_FLAT. */
328 if (sym_lookup (&syms[INCL_FLAT], addr)
329 || (syms[INCL_FLAT].len == 0
330 && !sym_lookup (&syms[EXCL_FLAT], addr)))
331 {
332 symtab.base[j].hist.time += credit;
333 }
334 else
335 {
336 total_time -= credit;
337 }
338 }
339 }
340 }
341
342 DBG (SAMPLEDEBUG, printf ("[assign_samples] total_time %f\n",
343 total_time));
344 }
345
346
347 /* Print header for flag histogram profile. */
348
349 static void
350 print_header (int prefix)
351 {
352 char unit[64];
353
354 sprintf (unit, _("%c%c/call"), prefix, hist_dimension_abbrev);
355
356 if (bsd_style_output)
357 {
358 printf (_("\ngranularity: each sample hit covers %ld byte(s)"),
359 (long) hist_scale * sizeof (UNIT));
360 if (total_time > 0.0)
361 {
362 printf (_(" for %.2f%% of %.2f %s\n\n"),
363 100.0 / total_time, total_time / hz, hist_dimension);
364 }
365 }
366 else
367 {
368 printf (_("\nEach sample counts as %g %s.\n"), 1.0 / hz, hist_dimension);
369 }
370
371 if (total_time <= 0.0)
372 {
373 printf (_(" no time accumulated\n\n"));
374
375 /* This doesn't hurt since all the numerators will be zero. */
376 total_time = 1.0;
377 }
378
379 printf ("%5.5s %10.10s %8.8s %8.8s %8.8s %8.8s %-8.8s\n",
380 "% ", _("cumulative"), _("self "), "", _("self "), _("total "),
381 "");
382 printf ("%5.5s %9.9s %8.8s %8.8s %8.8s %8.8s %-8.8s\n",
383 _("time"), hist_dimension, hist_dimension, _("calls"), unit, unit,
384 _("name"));
385 }
386
387
388 static void
389 print_line (Sym *sym, double scale)
390 {
391 if (ignore_zeros && sym->ncalls == 0 && sym->hist.time == 0)
392 return;
393
394 accum_time += sym->hist.time;
395
396 if (bsd_style_output)
397 printf ("%5.1f %10.2f %8.2f",
398 total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0,
399 accum_time / hz, sym->hist.time / hz);
400 else
401 printf ("%6.2f %9.2f %8.2f",
402 total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0,
403 accum_time / hz, sym->hist.time / hz);
404
405 if (sym->ncalls != 0)
406 printf (" %8lu %8.2f %8.2f ",
407 sym->ncalls, scale * sym->hist.time / hz / sym->ncalls,
408 scale * (sym->hist.time + sym->cg.child_time) / hz / sym->ncalls);
409 else
410 printf (" %8.8s %8.8s %8.8s ", "", "", "");
411
412 if (bsd_style_output)
413 print_name (sym);
414 else
415 print_name_only (sym);
416
417 printf ("\n");
418 }
419
420
421 /* Compare LP and RP. The primary comparison key is execution time,
422 the secondary is number of invocation, and the tertiary is the
423 lexicographic order of the function names. */
424
425 static int
426 cmp_time (const PTR lp, const PTR rp)
427 {
428 const Sym *left = *(const Sym **) lp;
429 const Sym *right = *(const Sym **) rp;
430 double time_diff;
431
432 time_diff = right->hist.time - left->hist.time;
433
434 if (time_diff > 0.0)
435 return 1;
436
437 if (time_diff < 0.0)
438 return -1;
439
440 if (right->ncalls > left->ncalls)
441 return 1;
442
443 if (right->ncalls < left->ncalls)
444 return -1;
445
446 return strcmp (left->name, right->name);
447 }
448
449
450 /* Print the flat histogram profile. */
451
452 void
453 hist_print ()
454 {
455 Sym **time_sorted_syms, *top_dog, *sym;
456 unsigned int index;
457 unsigned log_scale;
458 double top_time, time;
459 bfd_vma addr;
460
461 if (first_output)
462 first_output = FALSE;
463 else
464 printf ("\f\n");
465
466 accum_time = 0.0;
467
468 if (bsd_style_output)
469 {
470 if (print_descriptions)
471 {
472 printf (_("\n\n\nflat profile:\n"));
473 flat_blurb (stdout);
474 }
475 }
476 else
477 {
478 printf (_("Flat profile:\n"));
479 }
480
481 /* Sort the symbol table by time (call-count and name as secondary
482 and tertiary keys). */
483 time_sorted_syms = (Sym **) xmalloc (symtab.len * sizeof (Sym *));
484
485 for (index = 0; index < symtab.len; ++index)
486 time_sorted_syms[index] = &symtab.base[index];
487
488 qsort (time_sorted_syms, symtab.len, sizeof (Sym *), cmp_time);
489
490 if (bsd_style_output)
491 {
492 log_scale = 5; /* Milli-seconds is BSD-default. */
493 }
494 else
495 {
496 /* Search for symbol with highest per-call
497 execution time and scale accordingly. */
498 log_scale = 0;
499 top_dog = 0;
500 top_time = 0.0;
501
502 for (index = 0; index < symtab.len; ++index)
503 {
504 sym = time_sorted_syms[index];
505
506 if (sym->ncalls != 0)
507 {
508 time = (sym->hist.time + sym->cg.child_time) / sym->ncalls;
509
510 if (time > top_time)
511 {
512 top_dog = sym;
513 top_time = time;
514 }
515 }
516 }
517
518 if (top_dog && top_dog->ncalls != 0 && top_time > 0.0)
519 {
520 top_time /= hz;
521
522 for (log_scale = 0; log_scale < ARRAY_SIZE (SItab); log_scale ++)
523 {
524 double scaled_value = SItab[log_scale].scale * top_time;
525
526 if (scaled_value >= 1.0 && scaled_value < 1000.0)
527 break;
528 }
529 }
530 }
531
532 /* For now, the dimension is always seconds. In the future, we
533 may also want to support other (pseudo-)dimensions (such as
534 I-cache misses etc.). */
535 print_header (SItab[log_scale].prefix);
536
537 for (index = 0; index < symtab.len; ++index)
538 {
539 addr = time_sorted_syms[index]->addr;
540
541 /* Print symbol if its in INCL_FLAT table or that table
542 is empty and the symbol is not in EXCL_FLAT. */
543 if (sym_lookup (&syms[INCL_FLAT], addr)
544 || (syms[INCL_FLAT].len == 0
545 && !sym_lookup (&syms[EXCL_FLAT], addr)))
546 print_line (time_sorted_syms[index], SItab[log_scale].scale);
547 }
548
549 free (time_sorted_syms);
550
551 if (print_descriptions && !bsd_style_output)
552 flat_blurb (stdout);
553 }
This page took 0.041292 seconds and 4 git commands to generate.