include/asm-mips/mach-au1x00/au1xxx_ide.h

   1 /*
   2  * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00   Aug. 02 2005
   3  *
   4  * BRIEF MODULE DESCRIPTION
   5  * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
   6  *
   7  * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
   8  *
   9  * This program is free software; you can redistribute it and/or modify it under
  10  * the terms of the GNU General Public License as published by the Free Software
  11  * Foundation; either version 2 of the License, or (at your option) any later
  12  * version.
  13  *
  14  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
  15  * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
  16  * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
  17  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  18  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  19  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  20  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  21  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  22  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  23  * POSSIBILITY OF SUCH DAMAGE.
  24  *
  25  * You should have received a copy of the GNU General Public License along with
  26  * this program; if not, write to the Free Software Foundation, Inc.,
  27  * 675 Mass Ave, Cambridge, MA 02139, USA.
  28  *
  29  * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
  30  *       Interface and Linux Device Driver" Application Note.
  31  */
  32 #include <linux/config.h>
  33
  34 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
  35         #define DMA_WAIT_TIMEOUT        100
  36         #define NUM_DESCRIPTORS         PRD_ENTRIES
  37 #else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
  38         #define NUM_DESCRIPTORS         2
  39 #endif
  40
  41 #ifndef AU1XXX_ATA_RQSIZE
  42         #define AU1XXX_ATA_RQSIZE       128
  43 #endif
  44
  45 /* Disable Burstable-Support for DBDMA */
  46 #ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
  47         #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON  0
  48 #endif
  49
  50 #ifdef CONFIG_PM
  51 /*
  52 * This will enable the device to be powered up when write() or read()
  53 * is called. If this is not defined, the driver will return -EBUSY.
  54 */
  55 #define WAKE_ON_ACCESS 1
  56
  57 typedef struct
  58 {
  59         spinlock_t         lock;       /* Used to block on state transitions */
  60         au1xxx_power_dev_t *dev;       /* Power Managers device structure */
  61         unsigned           stopped;    /* USed to signaling device is stopped */
  62 } pm_state;
  63 #endif
  64
  65
  66 typedef struct
  67 {
  68         u32                     tx_dev_id, rx_dev_id, target_dev_id;
  69         u32                     tx_chan, rx_chan;
  70         void                    *tx_desc_head, *rx_desc_head;
  71         ide_hwif_t              *hwif;
  72 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
  73         ide_drive_t             *drive;
  74         u8                      white_list, black_list;
  75         struct dbdma_cmd        *dma_table_cpu;
  76         dma_addr_t              dma_table_dma;
  77 #endif
  78         struct device           *dev;
  79         int                     irq;
  80         u32                     regbase;
  81 #ifdef CONFIG_PM
  82         pm_state                pm;
  83 #endif
  84 } _auide_hwif;
  85
  86 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
  87 /* HD white list */
  88 static const struct drive_list_entry dma_white_list [] = {
  89 /*
  90  * Hitachi
  91  */
  92         { "HITACHI_DK14FA-20"    ,       "ALL"           },
  93         { "HTS726060M9AT00"      ,       "ALL"           },
  94 /*
  95  * Maxtor
  96  */
  97         { "Maxtor 6E040L0"      ,       "ALL"           },
  98         { "Maxtor 6Y080P0"      ,       "ALL"           },
  99         { "Maxtor 6Y160P0"      ,       "ALL"           },
 100 /*
 101  * Seagate
 102  */
 103         { "ST3120026A"          ,       "ALL"           },
 104         { "ST320014A"           ,       "ALL"           },
 105         { "ST94011A"            ,       "ALL"           },
 106         { "ST340016A"           ,       "ALL"           },
 107 /*
 108  * Western Digital
 109  */
 110         { "WDC WD400UE-00HCT0"  ,       "ALL"           },
 111         { "WDC WD400JB-00JJC0"  ,       "ALL"           },
 112         { NULL                  ,       NULL            }
 113 };
 114
 115 /* HD black list */
 116 static const struct drive_list_entry dma_black_list [] = {
 117 /*
 118  * Western Digital
 119  */
 120         { "WDC WD100EB-00CGH0"  ,       "ALL"           },
 121         { "WDC WD200BB-00AUA1"  ,       "ALL"           },
 122         { "WDC AC24300L"        ,       "ALL"           },
 123         { NULL                  ,       NULL            }
 124 };
 125 #endif
 126
 127 /* function prototyping */
 128 u8 auide_inb(unsigned long port);
 129 u16 auide_inw(unsigned long port);
 130 u32 auide_inl(unsigned long port);
 131 void auide_insw(unsigned long port, void *addr, u32 count);
 132 void auide_insl(unsigned long port, void *addr, u32 count);
 133 void auide_outb(u8 addr, unsigned long port);
 134 void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port);
 135 void auide_outw(u16 addr, unsigned long port);
 136 void auide_outl(u32 addr, unsigned long port);
 137 void auide_outsw(unsigned long port, void *addr, u32 count);
 138 void auide_outsl(unsigned long port, void *addr, u32 count);
 139 static void auide_tune_drive(ide_drive_t *drive, byte pio);
 140 static int auide_tune_chipset (ide_drive_t *drive, u8 speed);
 141 static int auide_ddma_init( _auide_hwif *auide );
 142 static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif);
 143 int __init auide_probe(void);
 144
 145 #ifdef CONFIG_PM
 146         int au1200ide_pm_callback( au1xxx_power_dev_t *dev,
 147                                    au1xxx_request_t request, void *data);
 148         static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev );
 149         static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev );
 150         static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev );
 151         static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev );
 152         static int au1xxxide_pm_access( au1xxx_power_dev_t *dev );
 153         static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev );
 154         static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev );
 155 #endif
 156
 157
 158 /*
 159  * Multi-Word DMA + DbDMA functions
 160  */
 161 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 162         static int auide_build_sglist(ide_drive_t *drive,  struct request *rq);
 163         static int auide_build_dmatable(ide_drive_t *drive);
 164         static int auide_dma_end(ide_drive_t *drive);
 165         ide_startstop_t auide_dma_intr (ide_drive_t *drive);
 166         static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command);
 167         static int auide_dma_setup(ide_drive_t *drive);
 168         static int auide_dma_check(ide_drive_t *drive);
 169         static int auide_dma_test_irq(ide_drive_t *drive);
 170         static int auide_dma_host_off(ide_drive_t *drive);
 171         static int auide_dma_host_on(ide_drive_t *drive);
 172         static int auide_dma_lostirq(ide_drive_t *drive);
 173         static int auide_dma_on(ide_drive_t *drive);
 174         static void auide_ddma_tx_callback(int irq, void *param,
 175                                            struct pt_regs *regs);
 176         static void auide_ddma_rx_callback(int irq, void *param,
 177                                            struct pt_regs *regs);
 178         static int auide_dma_off_quietly(ide_drive_t *drive);
 179 #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
 180
 181 /*******************************************************************************
 182 * PIO Mode timing calculation :                                                *
 183 *                                                                              *
 184 * Static Bus Spec   ATA Spec                                                   *
 185 *      Tcsoe      =   t1                                                       *
 186 *      Toecs      =   t9                                                       *
 187 *      Twcs       =   t9                                                       *
 188 *      Tcsh       =   t2i | t2                                                 *
 189 *      Tcsoff     =   t2i | t2                                                 *
 190 *      Twp        =   t2                                                       *
 191 *      Tcsw       =   t1                                                       *
 192 *      Tpm        =   0                                                        *
 193 *      Ta         =   t1+t2                                                    *
 194 *******************************************************************************/
 195
 196 #define TCSOE_MASK            (0x07<<29)
 197 #define TOECS_MASK            (0x07<<26)
 198 #define TWCS_MASK             (0x07<<28)
 199 #define TCSH_MASK             (0x0F<<24)
 200 #define TCSOFF_MASK           (0x07<<20)
 201 #define TWP_MASK              (0x3F<<14)
 202 #define TCSW_MASK             (0x0F<<10)
 203 #define TPM_MASK              (0x0F<<6)
 204 #define TA_MASK               (0x3F<<0)
 205 #define TS_MASK               (1<<8)
 206
 207 /* Timing parameters PIO mode 0 */
 208 #define SBC_IDE_PIO0_TCSOE    (0x04<<29)
 209 #define SBC_IDE_PIO0_TOECS    (0x01<<26)
 210 #define SBC_IDE_PIO0_TWCS     (0x02<<28)
 211 #define SBC_IDE_PIO0_TCSH     (0x08<<24)
 212 #define SBC_IDE_PIO0_TCSOFF   (0x07<<20)
 213 #define SBC_IDE_PIO0_TWP      (0x10<<14)
 214 #define SBC_IDE_PIO0_TCSW     (0x04<<10)
 215 #define SBC_IDE_PIO0_TPM      (0x0<<6)
 216 #define SBC_IDE_PIO0_TA       (0x15<<0)
 217 /* Timing parameters PIO mode 1 */
 218 #define SBC_IDE_PIO1_TCSOE    (0x03<<29)
 219 #define SBC_IDE_PIO1_TOECS    (0x01<<26)
 220 #define SBC_IDE_PIO1_TWCS     (0x01<<28)
 221 #define SBC_IDE_PIO1_TCSH     (0x06<<24)
 222 #define SBC_IDE_PIO1_TCSOFF   (0x06<<20)
 223 #define SBC_IDE_PIO1_TWP      (0x08<<14)
 224 #define SBC_IDE_PIO1_TCSW     (0x03<<10)
 225 #define SBC_IDE_PIO1_TPM      (0x00<<6)
 226 #define SBC_IDE_PIO1_TA       (0x0B<<0)
 227 /* Timing parameters PIO mode 2 */
 228 #define SBC_IDE_PIO2_TCSOE    (0x05<<29)
 229 #define SBC_IDE_PIO2_TOECS    (0x01<<26)
 230 #define SBC_IDE_PIO2_TWCS     (0x01<<28)
 231 #define SBC_IDE_PIO2_TCSH     (0x07<<24)
 232 #define SBC_IDE_PIO2_TCSOFF   (0x07<<20)
 233 #define SBC_IDE_PIO2_TWP      (0x1F<<14)
 234 #define SBC_IDE_PIO2_TCSW     (0x05<<10)
 235 #define SBC_IDE_PIO2_TPM      (0x00<<6)
 236 #define SBC_IDE_PIO2_TA       (0x22<<0)
 237 /* Timing parameters PIO mode 3 */
 238 #define SBC_IDE_PIO3_TCSOE    (0x05<<29)
 239 #define SBC_IDE_PIO3_TOECS    (0x01<<26)
 240 #define SBC_IDE_PIO3_TWCS     (0x01<<28)
 241 #define SBC_IDE_PIO3_TCSH     (0x0D<<24)
 242 #define SBC_IDE_PIO3_TCSOFF   (0x0D<<20)
 243 #define SBC_IDE_PIO3_TWP      (0x15<<14)
 244 #define SBC_IDE_PIO3_TCSW     (0x05<<10)
 245 #define SBC_IDE_PIO3_TPM      (0x00<<6)
 246 #define SBC_IDE_PIO3_TA       (0x1A<<0)
 247 /* Timing parameters PIO mode 4 */
 248 #define SBC_IDE_PIO4_TCSOE    (0x04<<29)
 249 #define SBC_IDE_PIO4_TOECS    (0x01<<26)
 250 #define SBC_IDE_PIO4_TWCS     (0x01<<28)
 251 #define SBC_IDE_PIO4_TCSH     (0x04<<24)
 252 #define SBC_IDE_PIO4_TCSOFF   (0x04<<20)
 253 #define SBC_IDE_PIO4_TWP      (0x0D<<14)
 254 #define SBC_IDE_PIO4_TCSW     (0x03<<10)
 255 #define SBC_IDE_PIO4_TPM      (0x00<<6)
 256 #define SBC_IDE_PIO4_TA       (0x12<<0)
 257 /* Timing parameters MDMA mode 0 */
 258 #define SBC_IDE_MDMA0_TCSOE   (0x03<<29)
 259 #define SBC_IDE_MDMA0_TOECS   (0x01<<26)
 260 #define SBC_IDE_MDMA0_TWCS    (0x01<<28)
 261 #define SBC_IDE_MDMA0_TCSH    (0x07<<24)
 262 #define SBC_IDE_MDMA0_TCSOFF  (0x07<<20)
 263 #define SBC_IDE_MDMA0_TWP     (0x0C<<14)
 264 #define SBC_IDE_MDMA0_TCSW    (0x03<<10)
 265 #define SBC_IDE_MDMA0_TPM     (0x00<<6)
 266 #define SBC_IDE_MDMA0_TA      (0x0F<<0)
 267 /* Timing parameters MDMA mode 1 */
 268 #define SBC_IDE_MDMA1_TCSOE   (0x05<<29)
 269 #define SBC_IDE_MDMA1_TOECS   (0x01<<26)
 270 #define SBC_IDE_MDMA1_TWCS    (0x01<<28)
 271 #define SBC_IDE_MDMA1_TCSH    (0x05<<24)
 272 #define SBC_IDE_MDMA1_TCSOFF  (0x05<<20)
 273 #define SBC_IDE_MDMA1_TWP     (0x0F<<14)
 274 #define SBC_IDE_MDMA1_TCSW    (0x05<<10)
 275 #define SBC_IDE_MDMA1_TPM     (0x00<<6)
 276 #define SBC_IDE_MDMA1_TA      (0x15<<0)
 277 /* Timing parameters MDMA mode 2 */
 278 #define SBC_IDE_MDMA2_TCSOE   (0x04<<29)
 279 #define SBC_IDE_MDMA2_TOECS   (0x01<<26)
 280 #define SBC_IDE_MDMA2_TWCS    (0x01<<28)
 281 #define SBC_IDE_MDMA2_TCSH    (0x04<<24)
 282 #define SBC_IDE_MDMA2_TCSOFF  (0x04<<20)
 283 #define SBC_IDE_MDMA2_TWP     (0x0D<<14)
 284 #define SBC_IDE_MDMA2_TCSW    (0x04<<10)
 285 #define SBC_IDE_MDMA2_TPM     (0x00<<6)
 286 #define SBC_IDE_MDMA2_TA      (0x12<<0)
 287
 288 #define SBC_IDE_TIMING(mode) \
 289          SBC_IDE_##mode##_TWCS | \
 290          SBC_IDE_##mode##_TCSH | \
 291          SBC_IDE_##mode##_TCSOFF | \
 292          SBC_IDE_##mode##_TWP | \
 293          SBC_IDE_##mode##_TCSW | \
 294          SBC_IDE_##mode##_TPM | \
 295          SBC_IDE_##mode##_TA