include/dis-asm.h

   1 /* Interface between the opcode library and its callers.
   2    Written by Cygnus Support, 1993.
   3
   4    The opcode library (libopcodes.a) provides instruction decoders for
   5    a large variety of instruction sets, callable with an identical
   6    interface, for making instruction-processing programs more independent
   7    of the instruction set being processed.  */
   8
   9 #ifndef DIS_ASM_H
  10 #define DIS_ASM_H
  11
  12 #include <stdio.h>
  13 #include "bfd.h"
  14
  15 typedef int (*fprintf_ftype) PARAMS((FILE*, const char*, ...));
  16
  17 enum dis_insn_type {
  18   dis_noninsn,                  /* Not a valid instruction */
  19   dis_nonbranch,                /* Not a branch instruction */
  20   dis_branch,                   /* Unconditional branch */
  21   dis_condbranch,               /* Conditional branch */
  22   dis_jsr,                      /* Jump to subroutine */
  23   dis_condjsr,                  /* Conditional jump to subroutine */
  24   dis_dref,                     /* Data reference instruction */
  25   dis_dref2                     /* Two data references in instruction */
  26 };
  27
  28 /* This struct is passed into the instruction decoding routine,
  29    and is passed back out into each callback.  The various fields are used
  30    for conveying information from your main routine into your callbacks,
  31    for passing information into the instruction decoders (such as the
  32    addresses of the callback functions), or for passing information
  33    back from the instruction decoders to their callers.
  34
  35    It must be initialized before it is first passed; this can be done
  36    by hand, or using one of the initialization macros below.  */
  37
  38 typedef struct disassemble_info {
  39   fprintf_ftype fprintf_func;
  40   FILE *stream;
  41   PTR application_data;
  42
  43   /* Target description.  We could replace this with a pointer to the bfd,
  44      but that would require one.  There currently isn't any such requirement
  45      so to avoid introducing one we record these explicitly.  */
  46   /* The bfd_arch value.  */
  47   enum bfd_architecture arch;
  48   /* The bfd_mach value.  */
  49   unsigned long mach;
  50   /* Endianness (for bi-endian cpus).  Mono-endian cpus can ignore this.  */
  51   enum bfd_endian endian;
  52
  53   /* For use by the disassembler.
  54      The top 16 bits are reserved for public use (and are documented here).
  55      The bottom 16 bits are for the internal use of the disassembler.  */
  56   unsigned long flags;
  57   PTR private_data;
  58
  59   /* Function used to get bytes to disassemble.  MEMADDR is the
  60      address of the stuff to be disassembled, MYADDR is the address to
  61      put the bytes in, and LENGTH is the number of bytes to read.
  62      INFO is a pointer to this struct.
  63      Returns an errno value or 0 for success.  */
  64   int (*read_memory_func)
  65     PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int length,
  66              struct disassemble_info *info));
  67
  68   /* Function which should be called if we get an error that we can't
  69      recover from.  STATUS is the errno value from read_memory_func and
  70      MEMADDR is the address that we were trying to read.  INFO is a
  71      pointer to this struct.  */
  72   void (*memory_error_func)
  73     PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info));
  74
  75   /* Function called to print ADDR.  */
  76   void (*print_address_func)
  77     PARAMS ((bfd_vma addr, struct disassemble_info *info));
  78
  79   /* These are for buffer_read_memory.  */
  80   bfd_byte *buffer;
  81   bfd_vma buffer_vma;
  82   int buffer_length;
  83
  84   /* Results from instruction decoders.  Not all decoders yet support
  85      this information.  This info is set each time an instruction is
  86      decoded, and is only valid for the last such instruction.
  87
  88      To determine whether this decoder supports this information, set
  89      insn_info_valid to 0, decode an instruction, then check it.  */
  90
  91   char insn_info_valid;         /* Branch info has been set. */
  92   char branch_delay_insns;      /* How many sequential insn's will run before
  93                                    a branch takes effect.  (0 = normal) */
  94   char data_size;               /* Size of data reference in insn, in bytes */
  95   enum dis_insn_type insn_type; /* Type of instruction */
  96   bfd_vma target;               /* Target address of branch or dref, if known;
  97                                    zero if unknown.  */
  98   bfd_vma target2;              /* Second target address for dref2 */
  99
 100 } disassemble_info;
 101
 102 \f
 103 /* Standard disassemblers.  Disassemble one instruction at the given
 104    target address.  Return number of bytes processed.  */
 105 typedef int (*disassembler_ftype)
 106      PARAMS((bfd_vma, disassemble_info *));
 107
 108 extern int print_insn_big_mips          PARAMS ((bfd_vma, disassemble_info*));
 109 extern int print_insn_little_mips       PARAMS ((bfd_vma, disassemble_info*));
 110 extern int print_insn_i386              PARAMS ((bfd_vma, disassemble_info*));
 111 extern int print_insn_m68k              PARAMS ((bfd_vma, disassemble_info*));
 112 extern int print_insn_z8001             PARAMS ((bfd_vma, disassemble_info*));
 113 extern int print_insn_z8002             PARAMS ((bfd_vma, disassemble_info*));
 114 extern int print_insn_h8300             PARAMS ((bfd_vma, disassemble_info*));
 115 extern int print_insn_h8300h            PARAMS ((bfd_vma, disassemble_info*));
 116 extern int print_insn_h8300s            PARAMS ((bfd_vma, disassemble_info*));
 117 extern int print_insn_h8500             PARAMS ((bfd_vma, disassemble_info*));
 118 extern int print_insn_alpha_osf         PARAMS ((bfd_vma, disassemble_info*));
 119 extern int print_insn_alpha_vms         PARAMS ((bfd_vma, disassemble_info*));
 120 /* start-sanitize-arc */
 121 extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));
 122 /* end-sanitize-arc */
 123 extern int print_insn_big_arm           PARAMS ((bfd_vma, disassemble_info*));
 124 extern int print_insn_little_arm        PARAMS ((bfd_vma, disassemble_info*));
 125 extern int print_insn_sparc             PARAMS ((bfd_vma, disassemble_info*));
 126 extern int print_insn_big_a29k          PARAMS ((bfd_vma, disassemble_info*));
 127 extern int print_insn_little_a29k       PARAMS ((bfd_vma, disassemble_info*));
 128 extern int print_insn_i960              PARAMS ((bfd_vma, disassemble_info*));
 129 extern int print_insn_sh                PARAMS ((bfd_vma, disassemble_info*));
 130 extern int print_insn_shl               PARAMS ((bfd_vma, disassemble_info*));
 131 extern int print_insn_hppa              PARAMS ((bfd_vma, disassemble_info*));
 132 extern int print_insn_m88k              PARAMS ((bfd_vma, disassemble_info*));
 133 extern int print_insn_ns32k             PARAMS ((bfd_vma, disassemble_info*));
 134 extern int print_insn_big_powerpc       PARAMS ((bfd_vma, disassemble_info*));
 135 extern int print_insn_little_powerpc    PARAMS ((bfd_vma, disassemble_info*));
 136 extern int print_insn_rs6000            PARAMS ((bfd_vma, disassemble_info*));
 137 extern int print_insn_w65               PARAMS ((bfd_vma, disassemble_info*));
 138 /* start-sanitize-d10v */
 139 extern int print_insn_d10v              PARAMS ((bfd_vma, disassemble_info*));
 140 /* end-sanitize-d10v */
 141
 142 /* Fetch the disassembler for a given BFD, if that support is available.  */
 143 extern disassembler_ftype disassembler  PARAMS ((bfd *));
 144
 145 \f
 146 /* This block of definitions is for particular callers who read instructions
 147    into a buffer before calling the instruction decoder.  */
 148
 149 /* Here is a function which callers may wish to use for read_memory_func.
 150    It gets bytes from a buffer.  */
 151 extern int buffer_read_memory
 152   PARAMS ((bfd_vma, bfd_byte *, int, struct disassemble_info *));
 153
 154 /* This function goes with buffer_read_memory.
 155    It prints a message using info->fprintf_func and info->stream.  */
 156 extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));
 157
 158
 159 /* Just print the address in hex.  This is included for completeness even
 160    though both GDB and objdump provide their own (to print symbolic
 161    addresses).  */
 162 extern void generic_print_address
 163   PARAMS ((bfd_vma, struct disassemble_info *));
 164
 165 /* Macro to initialize a disassemble_info struct.  This should be called
 166    by all applications creating such a struct.  */
 167 #define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
 168   (INFO).arch = bfd_arch_unknown, \
 169   (INFO).mach = 0, \
 170   (INFO).endian = BFD_ENDIAN_UNKNOWN, \
 171   INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)
 172
 173 /* Call this macro to initialize only the internal variables for the
 174    disassembler.  Architecture dependent things such as byte order, or machine
 175    variant are not touched by this macro.  This makes things much easier for
 176    GDB which must initialize these things seperatly.  */
 177
 178 #define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
 179   (INFO).fprintf_func = (FPRINTF_FUNC), \
 180   (INFO).stream = (STREAM), \
 181   (INFO).buffer = NULL, \
 182   (INFO).buffer_vma = 0, \
 183   (INFO).buffer_length = 0, \
 184   (INFO).read_memory_func = buffer_read_memory, \
 185   (INFO).memory_error_func = perror_memory, \
 186   (INFO).print_address_func = generic_print_address, \
 187   (INFO).flags = 0, \
 188   (INFO).insn_info_valid = 0
 189
 190 #endif /* ! defined (DIS_ASM_H) */