perf stat: Implement --metric-only mode
[deliverable/linux.git] / include / drm / drm_mipi_dsi.h
1 /*
2 * MIPI DSI Bus
3 *
4 * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
5 * Andrzej Hajda <a.hajda@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12 #ifndef __DRM_MIPI_DSI_H__
13 #define __DRM_MIPI_DSI_H__
14
15 #include <linux/device.h>
16
17 struct mipi_dsi_host;
18 struct mipi_dsi_device;
19
20 /* request ACK from peripheral */
21 #define MIPI_DSI_MSG_REQ_ACK BIT(0)
22 /* use Low Power Mode to transmit message */
23 #define MIPI_DSI_MSG_USE_LPM BIT(1)
24
25 /**
26 * struct mipi_dsi_msg - read/write DSI buffer
27 * @channel: virtual channel id
28 * @type: payload data type
29 * @flags: flags controlling this message transmission
30 * @tx_len: length of @tx_buf
31 * @tx_buf: data to be written
32 * @rx_len: length of @rx_buf
33 * @rx_buf: data to be read, or NULL
34 */
35 struct mipi_dsi_msg {
36 u8 channel;
37 u8 type;
38 u16 flags;
39
40 size_t tx_len;
41 const void *tx_buf;
42
43 size_t rx_len;
44 void *rx_buf;
45 };
46
47 bool mipi_dsi_packet_format_is_short(u8 type);
48 bool mipi_dsi_packet_format_is_long(u8 type);
49
50 /**
51 * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
52 * @size: size (in bytes) of the packet
53 * @header: the four bytes that make up the header (Data ID, Word Count or
54 * Packet Data, and ECC)
55 * @payload_length: number of bytes in the payload
56 * @payload: a pointer to a buffer containing the payload, if any
57 */
58 struct mipi_dsi_packet {
59 size_t size;
60 u8 header[4];
61 size_t payload_length;
62 const u8 *payload;
63 };
64
65 int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
66 const struct mipi_dsi_msg *msg);
67
68 /**
69 * struct mipi_dsi_host_ops - DSI bus operations
70 * @attach: attach DSI device to DSI host
71 * @detach: detach DSI device from DSI host
72 * @transfer: transmit a DSI packet
73 *
74 * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
75 * structures. This structure contains information about the type of packet
76 * being transmitted as well as the transmit and receive buffers. When an
77 * error is encountered during transmission, this function will return a
78 * negative error code. On success it shall return the number of bytes
79 * transmitted for write packets or the number of bytes received for read
80 * packets.
81 *
82 * Note that typically DSI packet transmission is atomic, so the .transfer()
83 * function will seldomly return anything other than the number of bytes
84 * contained in the transmit buffer on success.
85 */
86 struct mipi_dsi_host_ops {
87 int (*attach)(struct mipi_dsi_host *host,
88 struct mipi_dsi_device *dsi);
89 int (*detach)(struct mipi_dsi_host *host,
90 struct mipi_dsi_device *dsi);
91 ssize_t (*transfer)(struct mipi_dsi_host *host,
92 const struct mipi_dsi_msg *msg);
93 };
94
95 /**
96 * struct mipi_dsi_host - DSI host device
97 * @dev: driver model device node for this DSI host
98 * @ops: DSI host operations
99 */
100 struct mipi_dsi_host {
101 struct device *dev;
102 const struct mipi_dsi_host_ops *ops;
103 };
104
105 int mipi_dsi_host_register(struct mipi_dsi_host *host);
106 void mipi_dsi_host_unregister(struct mipi_dsi_host *host);
107
108 /* DSI mode flags */
109
110 /* video mode */
111 #define MIPI_DSI_MODE_VIDEO BIT(0)
112 /* video burst mode */
113 #define MIPI_DSI_MODE_VIDEO_BURST BIT(1)
114 /* video pulse mode */
115 #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2)
116 /* enable auto vertical count mode */
117 #define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3)
118 /* enable hsync-end packets in vsync-pulse and v-porch area */
119 #define MIPI_DSI_MODE_VIDEO_HSE BIT(4)
120 /* disable hfront-porch area */
121 #define MIPI_DSI_MODE_VIDEO_HFP BIT(5)
122 /* disable hback-porch area */
123 #define MIPI_DSI_MODE_VIDEO_HBP BIT(6)
124 /* disable hsync-active area */
125 #define MIPI_DSI_MODE_VIDEO_HSA BIT(7)
126 /* flush display FIFO on vsync pulse */
127 #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8)
128 /* disable EoT packets in HS mode */
129 #define MIPI_DSI_MODE_EOT_PACKET BIT(9)
130 /* device supports non-continuous clock behavior (DSI spec 5.6.1) */
131 #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10)
132 /* transmit data in low power */
133 #define MIPI_DSI_MODE_LPM BIT(11)
134
135 enum mipi_dsi_pixel_format {
136 MIPI_DSI_FMT_RGB888,
137 MIPI_DSI_FMT_RGB666,
138 MIPI_DSI_FMT_RGB666_PACKED,
139 MIPI_DSI_FMT_RGB565,
140 };
141
142 /**
143 * struct mipi_dsi_device - DSI peripheral device
144 * @host: DSI host for this peripheral
145 * @dev: driver model device node for this peripheral
146 * @channel: virtual channel assigned to the peripheral
147 * @format: pixel format for video mode
148 * @lanes: number of active data lanes
149 * @mode_flags: DSI operation mode related flags
150 */
151 struct mipi_dsi_device {
152 struct mipi_dsi_host *host;
153 struct device dev;
154
155 unsigned int channel;
156 unsigned int lanes;
157 enum mipi_dsi_pixel_format format;
158 unsigned long mode_flags;
159 };
160
161 static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
162 {
163 return container_of(dev, struct mipi_dsi_device, dev);
164 }
165
166 /**
167 * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
168 * given pixel format defined by the MIPI DSI
169 * specification
170 * @fmt: MIPI DSI pixel format
171 *
172 * Returns: The number of bits per pixel of the given pixel format.
173 */
174 static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
175 {
176 switch (fmt) {
177 case MIPI_DSI_FMT_RGB888:
178 case MIPI_DSI_FMT_RGB666:
179 return 24;
180
181 case MIPI_DSI_FMT_RGB666_PACKED:
182 return 18;
183
184 case MIPI_DSI_FMT_RGB565:
185 return 16;
186 }
187
188 return -EINVAL;
189 }
190
191 struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
192 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
193 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
194 int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi);
195 int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
196 int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
197 u16 value);
198
199 ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
200 size_t size);
201 ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
202 size_t num_params, void *data, size_t size);
203
204 /**
205 * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
206 * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
207 * information only
208 * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
209 * V-Blanking and H-Blanking information
210 */
211 enum mipi_dsi_dcs_tear_mode {
212 MIPI_DSI_DCS_TEAR_MODE_VBLANK,
213 MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
214 };
215
216 #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
217 #define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3)
218 #define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4)
219 #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
220 #define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6)
221
222 ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
223 const void *data, size_t len);
224 ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
225 const void *data, size_t len);
226 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
227 size_t len);
228 int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
229 int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
230 int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
231 int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
232 int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
233 int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
234 int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
235 int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
236 int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
237 u16 end);
238 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
239 u16 end);
240 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
241 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
242 enum mipi_dsi_dcs_tear_mode mode);
243 int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
244
245 /**
246 * struct mipi_dsi_driver - DSI driver
247 * @driver: device driver model driver
248 * @probe: callback for device binding
249 * @remove: callback for device unbinding
250 * @shutdown: called at shutdown time to quiesce the device
251 */
252 struct mipi_dsi_driver {
253 struct device_driver driver;
254 int(*probe)(struct mipi_dsi_device *dsi);
255 int(*remove)(struct mipi_dsi_device *dsi);
256 void (*shutdown)(struct mipi_dsi_device *dsi);
257 };
258
259 static inline struct mipi_dsi_driver *
260 to_mipi_dsi_driver(struct device_driver *driver)
261 {
262 return container_of(driver, struct mipi_dsi_driver, driver);
263 }
264
265 static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi)
266 {
267 return dev_get_drvdata(&dsi->dev);
268 }
269
270 static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
271 {
272 dev_set_drvdata(&dsi->dev, data);
273 }
274
275 int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
276 struct module *owner);
277 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
278
279 #define mipi_dsi_driver_register(driver) \
280 mipi_dsi_driver_register_full(driver, THIS_MODULE)
281
282 #define module_mipi_dsi_driver(__mipi_dsi_driver) \
283 module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
284 mipi_dsi_driver_unregister)
285
286 #endif /* __DRM_MIPI_DSI__ */
This page took 0.046254 seconds and 5 git commands to generate.