1 /* Xtensa ELF support for BFD.
2 Copyright 2003, 2004, 2007, 2008, 2010 Free Software Foundation, Inc.
3 Contributed by Bob Wilson (bwilson@tensilica.com) at Tensilica.
5 This file is part of BFD, the Binary File Descriptor library.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301,
22 /* This file holds definitions specific to the Xtensa ELF ABI. */
27 #include "elf/reloc-macros.h"
30 START_RELOC_NUMBERS (elf_xtensa_reloc_type
)
31 RELOC_NUMBER (R_XTENSA_NONE
, 0)
32 RELOC_NUMBER (R_XTENSA_32
, 1)
33 RELOC_NUMBER (R_XTENSA_RTLD
, 2)
34 RELOC_NUMBER (R_XTENSA_GLOB_DAT
, 3)
35 RELOC_NUMBER (R_XTENSA_JMP_SLOT
, 4)
36 RELOC_NUMBER (R_XTENSA_RELATIVE
, 5)
37 RELOC_NUMBER (R_XTENSA_PLT
, 6)
38 RELOC_NUMBER (R_XTENSA_OP0
, 8)
39 RELOC_NUMBER (R_XTENSA_OP1
, 9)
40 RELOC_NUMBER (R_XTENSA_OP2
, 10)
41 RELOC_NUMBER (R_XTENSA_ASM_EXPAND
, 11)
42 RELOC_NUMBER (R_XTENSA_ASM_SIMPLIFY
, 12)
43 RELOC_NUMBER (R_XTENSA_32_PCREL
, 14)
44 RELOC_NUMBER (R_XTENSA_GNU_VTINHERIT
, 15)
45 RELOC_NUMBER (R_XTENSA_GNU_VTENTRY
, 16)
46 RELOC_NUMBER (R_XTENSA_DIFF8
, 17)
47 RELOC_NUMBER (R_XTENSA_DIFF16
, 18)
48 RELOC_NUMBER (R_XTENSA_DIFF32
, 19)
49 RELOC_NUMBER (R_XTENSA_SLOT0_OP
, 20)
50 RELOC_NUMBER (R_XTENSA_SLOT1_OP
, 21)
51 RELOC_NUMBER (R_XTENSA_SLOT2_OP
, 22)
52 RELOC_NUMBER (R_XTENSA_SLOT3_OP
, 23)
53 RELOC_NUMBER (R_XTENSA_SLOT4_OP
, 24)
54 RELOC_NUMBER (R_XTENSA_SLOT5_OP
, 25)
55 RELOC_NUMBER (R_XTENSA_SLOT6_OP
, 26)
56 RELOC_NUMBER (R_XTENSA_SLOT7_OP
, 27)
57 RELOC_NUMBER (R_XTENSA_SLOT8_OP
, 28)
58 RELOC_NUMBER (R_XTENSA_SLOT9_OP
, 29)
59 RELOC_NUMBER (R_XTENSA_SLOT10_OP
, 30)
60 RELOC_NUMBER (R_XTENSA_SLOT11_OP
, 31)
61 RELOC_NUMBER (R_XTENSA_SLOT12_OP
, 32)
62 RELOC_NUMBER (R_XTENSA_SLOT13_OP
, 33)
63 RELOC_NUMBER (R_XTENSA_SLOT14_OP
, 34)
64 RELOC_NUMBER (R_XTENSA_SLOT0_ALT
, 35)
65 RELOC_NUMBER (R_XTENSA_SLOT1_ALT
, 36)
66 RELOC_NUMBER (R_XTENSA_SLOT2_ALT
, 37)
67 RELOC_NUMBER (R_XTENSA_SLOT3_ALT
, 38)
68 RELOC_NUMBER (R_XTENSA_SLOT4_ALT
, 39)
69 RELOC_NUMBER (R_XTENSA_SLOT5_ALT
, 40)
70 RELOC_NUMBER (R_XTENSA_SLOT6_ALT
, 41)
71 RELOC_NUMBER (R_XTENSA_SLOT7_ALT
, 42)
72 RELOC_NUMBER (R_XTENSA_SLOT8_ALT
, 43)
73 RELOC_NUMBER (R_XTENSA_SLOT9_ALT
, 44)
74 RELOC_NUMBER (R_XTENSA_SLOT10_ALT
, 45)
75 RELOC_NUMBER (R_XTENSA_SLOT11_ALT
, 46)
76 RELOC_NUMBER (R_XTENSA_SLOT12_ALT
, 47)
77 RELOC_NUMBER (R_XTENSA_SLOT13_ALT
, 48)
78 RELOC_NUMBER (R_XTENSA_SLOT14_ALT
, 49)
79 RELOC_NUMBER (R_XTENSA_TLSDESC_FN
, 50)
80 RELOC_NUMBER (R_XTENSA_TLSDESC_ARG
, 51)
81 RELOC_NUMBER (R_XTENSA_TLS_DTPOFF
, 52)
82 RELOC_NUMBER (R_XTENSA_TLS_TPOFF
, 53)
83 RELOC_NUMBER (R_XTENSA_TLS_FUNC
, 54)
84 RELOC_NUMBER (R_XTENSA_TLS_ARG
, 55)
85 RELOC_NUMBER (R_XTENSA_TLS_CALL
, 56)
86 END_RELOC_NUMBERS (R_XTENSA_max
)
88 /* Processor-specific flags for the ELF header e_flags field. */
90 /* Four-bit Xtensa machine type field. */
91 #define EF_XTENSA_MACH 0x0000000f
93 /* Various CPU types. */
94 #define E_XTENSA_MACH 0x00000000
96 /* Leave bits 0xf0 alone in case we ever have more than 16 cpu types.
97 Highly unlikely, but what the heck. */
99 #define EF_XTENSA_XT_INSN 0x00000100
100 #define EF_XTENSA_XT_LIT 0x00000200
103 /* Processor-specific dynamic array tags. */
105 /* Offset of the table that records the GOT location(s). */
106 #define DT_XTENSA_GOT_LOC_OFF 0x70000000
108 /* Number of entries in the GOT location table. */
109 #define DT_XTENSA_GOT_LOC_SZ 0x70000001
112 /* Definitions for instruction and literal property tables. The
113 tables for ".gnu.linkonce.*" sections are placed in the following
116 instruction tables: .gnu.linkonce.x.*
117 literal tables: .gnu.linkonce.p.*
120 #define XTENSA_INSN_SEC_NAME ".xt.insn"
121 #define XTENSA_LIT_SEC_NAME ".xt.lit"
122 #define XTENSA_PROP_SEC_NAME ".xt.prop"
124 typedef struct property_table_entry_t
129 } property_table_entry
;
131 /* Flags in the property tables to specify whether blocks of memory are
132 literals, instructions, data, or unreachable. For instructions,
133 blocks that begin loop targets and branch targets are designated.
134 Blocks that do not allow density instructions, instruction reordering
135 or transformation are also specified. Finally, for branch targets,
136 branch target alignment priority is included. Alignment of the next
137 block is specified in the current block and the size of the current
138 block does not include any fill required to align to the next
141 #define XTENSA_PROP_LITERAL 0x00000001
142 #define XTENSA_PROP_INSN 0x00000002
143 #define XTENSA_PROP_DATA 0x00000004
144 #define XTENSA_PROP_UNREACHABLE 0x00000008
145 /* Instruction-only properties at beginning of code. */
146 #define XTENSA_PROP_INSN_LOOP_TARGET 0x00000010
147 #define XTENSA_PROP_INSN_BRANCH_TARGET 0x00000020
148 /* Instruction-only properties about code. */
149 #define XTENSA_PROP_INSN_NO_DENSITY 0x00000040
150 #define XTENSA_PROP_INSN_NO_REORDER 0x00000080
151 /* Historically, NO_TRANSFORM was a property of instructions,
152 but it should apply to literals under certain circumstances. */
153 #define XTENSA_PROP_NO_TRANSFORM 0x00000100
155 /* Branch target alignment information. This transmits information
156 to the linker optimization about the priority of aligning a
157 particular block for branch target alignment: None, low priority,
158 high priority, or required. These only need to be checked in
159 instruction blocks marked as XTENSA_PROP_INSN_BRANCH_TARGET.
162 switch (GET_XTENSA_PROP_BT_ALIGN(flags))
163 case XTENSA_PROP_BT_ALIGN_NONE:
164 case XTENSA_PROP_BT_ALIGN_LOW:
165 case XTENSA_PROP_BT_ALIGN_HIGH:
166 case XTENSA_PROP_BT_ALIGN_REQUIRE:
168 #define XTENSA_PROP_BT_ALIGN_MASK 0x00000600
170 /* No branch target alignment. */
171 #define XTENSA_PROP_BT_ALIGN_NONE 0x0
172 /* Low priority branch target alignment. */
173 #define XTENSA_PROP_BT_ALIGN_LOW 0x1
174 /* High priority branch target alignment. */
175 #define XTENSA_PROP_BT_ALIGN_HIGH 0x2
176 /* Required branch target alignment. */
177 #define XTENSA_PROP_BT_ALIGN_REQUIRE 0x3
179 #define GET_XTENSA_PROP_BT_ALIGN(flag) \
180 (((unsigned)((flag) & (XTENSA_PROP_BT_ALIGN_MASK))) >> 9)
181 #define SET_XTENSA_PROP_BT_ALIGN(flag, align) \
182 (((flag) & (~XTENSA_PROP_BT_ALIGN_MASK)) | \
183 (((align) << 9) & XTENSA_PROP_BT_ALIGN_MASK))
185 /* Alignment is specified in the block BEFORE the one that needs
186 alignment. Up to 5 bits. Use GET_XTENSA_PROP_ALIGNMENT(flags) to
187 get the required alignment specified as a power of 2. Use
188 SET_XTENSA_PROP_ALIGNMENT(flags, pow2) to set the required
189 alignment. Be careful of side effects since the SET will evaluate
190 flags twice. Also, note that the SIZE of a block in the property
191 table does not include the alignment size, so the alignment fill
192 must be calculated to determine if two blocks are contiguous.
193 TEXT_ALIGN is not currently implemented but is a placeholder for a
194 possible future implementation. */
196 #define XTENSA_PROP_ALIGN 0x00000800
198 #define XTENSA_PROP_ALIGNMENT_MASK 0x0001f000
200 #define GET_XTENSA_PROP_ALIGNMENT(flag) \
201 (((unsigned)((flag) & (XTENSA_PROP_ALIGNMENT_MASK))) >> 12)
202 #define SET_XTENSA_PROP_ALIGNMENT(flag, align) \
203 (((flag) & (~XTENSA_PROP_ALIGNMENT_MASK)) | \
204 (((align) << 12) & XTENSA_PROP_ALIGNMENT_MASK))
206 #define XTENSA_PROP_INSN_ABSLIT 0x00020000
208 #endif /* _ELF_XTENSA_H */
This page took 0.034183 seconds and 4 git commands to generate.