projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
ide: ide_dev_is_sata() -> ata_id_is_sata()
[deliverable/linux.git] / include / linux / ata.h
1
2 /*
3 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
4 * Copyright 2003-2004 Jeff Garzik
5 *
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2, or (at your option)
10 * any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; see the file COPYING. If not, write to
19 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
20 *
21 *
22 * libata documentation is available via 'make {ps|pdf}docs',
23 * as Documentation/DocBook/libata.*
24 *
25 * Hardware documentation available from http://www.t13.org/
26 *
27 */
28
29 #ifndef __LINUX_ATA_H__
30 #define __LINUX_ATA_H__
31
32 #include <linux/types.h>
33
34 /* defines only for the constants which don't work well as enums */
35 #define ATA_DMA_BOUNDARY 0xffffUL
36 #define ATA_DMA_MASK 0xffffffffULL
37
38 enum {
39 /* various global constants */
40 ATA_MAX_DEVICES = 2, /* per bus/port */
41 ATA_MAX_PRD = 256, /* we could make these 256/256 */
42 ATA_SECT_SIZE = 512,
43 ATA_MAX_SECTORS_128 = 128,
44 ATA_MAX_SECTORS = 256,
45 ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */
46 ATA_MAX_SECTORS_TAPE = 65535,
47
48 ATA_ID_WORDS = 256,
49 ATA_ID_CONFIG = 0,
50 ATA_ID_CYLS = 1,
51 ATA_ID_HEADS = 3,
52 ATA_ID_SECTORS = 6,
53 ATA_ID_SERNO = 10,
54 ATA_ID_BUF_SIZE = 21,
55 ATA_ID_FW_REV = 23,
56 ATA_ID_PROD = 27,
57 ATA_ID_MAX_MULTSECT = 47,
58 ATA_ID_DWORD_IO = 48,
59 ATA_ID_CAPABILITY = 49,
60 ATA_ID_OLD_PIO_MODES = 51,
61 ATA_ID_OLD_DMA_MODES = 52,
62 ATA_ID_FIELD_VALID = 53,
63 ATA_ID_CUR_CYLS = 54,
64 ATA_ID_CUR_HEADS = 55,
65 ATA_ID_CUR_SECTORS = 56,
66 ATA_ID_MULTSECT = 59,
67 ATA_ID_LBA_CAPACITY = 60,
68 ATA_ID_SWDMA_MODES = 62,
69 ATA_ID_MWDMA_MODES = 63,
70 ATA_ID_PIO_MODES = 64,
71 ATA_ID_EIDE_DMA_MIN = 65,
72 ATA_ID_EIDE_DMA_TIME = 66,
73 ATA_ID_EIDE_PIO = 67,
74 ATA_ID_EIDE_PIO_IORDY = 68,
75 ATA_ID_QUEUE_DEPTH = 75,
76 ATA_ID_MAJOR_VER = 80,
77 ATA_ID_COMMAND_SET_1 = 82,
78 ATA_ID_COMMAND_SET_2 = 83,
79 ATA_ID_CFSSE = 84,
80 ATA_ID_CFS_ENABLE_1 = 85,
81 ATA_ID_CFS_ENABLE_2 = 86,
82 ATA_ID_CSF_DEFAULT = 87,
83 ATA_ID_UDMA_MODES = 88,
84 ATA_ID_HW_CONFIG = 93,
85 ATA_ID_SPG = 98,
86 ATA_ID_LBA_CAPACITY_2 = 100,
87 ATA_ID_LAST_LUN = 126,
88 ATA_ID_DLF = 128,
89 ATA_ID_CSFO = 129,
90 ATA_ID_CFA_POWER = 160,
91 ATA_ID_ROT_SPEED = 217,
92 ATA_ID_PIO4 = (1 << 1),
93
94 ATA_ID_SERNO_LEN = 20,
95 ATA_ID_FW_REV_LEN = 8,
96 ATA_ID_PROD_LEN = 40,
97
98 ATA_PCI_CTL_OFS = 2,
99
100 ATA_PIO0 = (1 << 0),
101 ATA_PIO1 = ATA_PIO0 | (1 << 1),
102 ATA_PIO2 = ATA_PIO1 | (1 << 2),
103 ATA_PIO3 = ATA_PIO2 | (1 << 3),
104 ATA_PIO4 = ATA_PIO3 | (1 << 4),
105 ATA_PIO5 = ATA_PIO4 | (1 << 5),
106 ATA_PIO6 = ATA_PIO5 | (1 << 6),
107
108 ATA_SWDMA0 = (1 << 0),
109 ATA_SWDMA1 = ATA_SWDMA0 | (1 << 1),
110 ATA_SWDMA2 = ATA_SWDMA1 | (1 << 2),
111
112 ATA_SWDMA2_ONLY = (1 << 2),
113
114 ATA_MWDMA0 = (1 << 0),
115 ATA_MWDMA1 = ATA_MWDMA0 | (1 << 1),
116 ATA_MWDMA2 = ATA_MWDMA1 | (1 << 2),
117
118 ATA_MWDMA12_ONLY = (1 << 1) | (1 << 2),
119 ATA_MWDMA2_ONLY = (1 << 2),
120
121 ATA_UDMA0 = (1 << 0),
122 ATA_UDMA1 = ATA_UDMA0 | (1 << 1),
123 ATA_UDMA2 = ATA_UDMA1 | (1 << 2),
124 ATA_UDMA3 = ATA_UDMA2 | (1 << 3),
125 ATA_UDMA4 = ATA_UDMA3 | (1 << 4),
126 ATA_UDMA5 = ATA_UDMA4 | (1 << 5),
127 ATA_UDMA6 = ATA_UDMA5 | (1 << 6),
128 ATA_UDMA7 = ATA_UDMA6 | (1 << 7),
129 /* ATA_UDMA7 is just for completeness... doesn't exist (yet?). */
130
131 ATA_UDMA_MASK_40C = ATA_UDMA2, /* udma0-2 */
132
133 /* DMA-related */
134 ATA_PRD_SZ = 8,
135 ATA_PRD_TBL_SZ = (ATA_MAX_PRD * ATA_PRD_SZ),
136 ATA_PRD_EOT = (1 << 31), /* end-of-table flag */
137
138 ATA_DMA_TABLE_OFS = 4,
139 ATA_DMA_STATUS = 2,
140 ATA_DMA_CMD = 0,
141 ATA_DMA_WR = (1 << 3),
142 ATA_DMA_START = (1 << 0),
143 ATA_DMA_INTR = (1 << 2),
144 ATA_DMA_ERR = (1 << 1),
145 ATA_DMA_ACTIVE = (1 << 0),
146
147 /* bits in ATA command block registers */
148 ATA_HOB = (1 << 7), /* LBA48 selector */
149 ATA_NIEN = (1 << 1), /* disable-irq flag */
150 ATA_LBA = (1 << 6), /* LBA28 selector */
151 ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */
152 ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */
153 ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */
154 ATA_BUSY = (1 << 7), /* BSY status bit */
155 ATA_DRDY = (1 << 6), /* device ready */
156 ATA_DF = (1 << 5), /* device fault */
157 ATA_DSC = (1 << 4), /* drive seek complete */
158 ATA_DRQ = (1 << 3), /* data request i/o */
159 ATA_CORR = (1 << 2), /* corrected data error */
160 ATA_IDX = (1 << 1), /* index */
161 ATA_ERR = (1 << 0), /* have an error */
162 ATA_SRST = (1 << 2), /* software reset */
163 ATA_ICRC = (1 << 7), /* interface CRC error */
164 ATA_BBK = ATA_ICRC, /* pre-EIDE: block marked bad */
165 ATA_UNC = (1 << 6), /* uncorrectable media error */
166 ATA_MC = (1 << 5), /* media changed */
167 ATA_IDNF = (1 << 4), /* ID not found */
168 ATA_MCR = (1 << 3), /* media change requested */
169 ATA_ABORTED = (1 << 2), /* command aborted */
170 ATA_TRK0NF = (1 << 1), /* track 0 not found */
171 ATA_AMNF = (1 << 0), /* address mark not found */
172 ATAPI_LFS = 0xF0, /* last failed sense */
173 ATAPI_EOM = ATA_TRK0NF, /* end of media */
174 ATAPI_ILI = ATA_AMNF, /* illegal length indication */
175 ATAPI_IO = (1 << 1),
176 ATAPI_COD = (1 << 0),
177
178 /* ATA command block registers */
179 ATA_REG_DATA = 0x00,
180 ATA_REG_ERR = 0x01,
181 ATA_REG_NSECT = 0x02,
182 ATA_REG_LBAL = 0x03,
183 ATA_REG_LBAM = 0x04,
184 ATA_REG_LBAH = 0x05,
185 ATA_REG_DEVICE = 0x06,
186 ATA_REG_STATUS = 0x07,
187
188 ATA_REG_FEATURE = ATA_REG_ERR, /* and their aliases */
189 ATA_REG_CMD = ATA_REG_STATUS,
190 ATA_REG_BYTEL = ATA_REG_LBAM,
191 ATA_REG_BYTEH = ATA_REG_LBAH,
192 ATA_REG_DEVSEL = ATA_REG_DEVICE,
193 ATA_REG_IRQ = ATA_REG_NSECT,
194
195 /* ATA device commands */
196 ATA_CMD_DEV_RESET = 0x08, /* ATAPI device reset */
197 ATA_CMD_CHK_POWER = 0xE5, /* check power mode */
198 ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */
199 ATA_CMD_IDLE = 0xE3, /* place in idle power mode */
200 ATA_CMD_EDD = 0x90, /* execute device diagnostic */
201 ATA_CMD_FLUSH = 0xE7,
202 ATA_CMD_FLUSH_EXT = 0xEA,
203 ATA_CMD_ID_ATA = 0xEC,
204 ATA_CMD_ID_ATAPI = 0xA1,
205 ATA_CMD_READ = 0xC8,
206 ATA_CMD_READ_EXT = 0x25,
207 ATA_CMD_WRITE = 0xCA,
208 ATA_CMD_WRITE_EXT = 0x35,
209 ATA_CMD_WRITE_FUA_EXT = 0x3D,
210 ATA_CMD_FPDMA_READ = 0x60,
211 ATA_CMD_FPDMA_WRITE = 0x61,
212 ATA_CMD_PIO_READ = 0x20,
213 ATA_CMD_PIO_READ_EXT = 0x24,
214 ATA_CMD_PIO_WRITE = 0x30,
215 ATA_CMD_PIO_WRITE_EXT = 0x34,
216 ATA_CMD_READ_MULTI = 0xC4,
217 ATA_CMD_READ_MULTI_EXT = 0x29,
218 ATA_CMD_WRITE_MULTI = 0xC5,
219 ATA_CMD_WRITE_MULTI_EXT = 0x39,
220 ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
221 ATA_CMD_SET_FEATURES = 0xEF,
222 ATA_CMD_SET_MULTI = 0xC6,
223 ATA_CMD_PACKET = 0xA0,
224 ATA_CMD_VERIFY = 0x40,
225 ATA_CMD_VERIFY_EXT = 0x42,
226 ATA_CMD_STANDBYNOW1 = 0xE0,
227 ATA_CMD_IDLEIMMEDIATE = 0xE1,
228 ATA_CMD_SLEEP = 0xE6,
229 ATA_CMD_INIT_DEV_PARAMS = 0x91,
230 ATA_CMD_READ_NATIVE_MAX = 0xF8,
231 ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
232 ATA_CMD_SET_MAX = 0xF9,
233 ATA_CMD_SET_MAX_EXT = 0x37,
234 ATA_CMD_READ_LOG_EXT = 0x2f,
235 ATA_CMD_PMP_READ = 0xE4,
236 ATA_CMD_PMP_WRITE = 0xE8,
237 ATA_CMD_CONF_OVERLAY = 0xB1,
238 ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
239 ATA_CMD_SMART = 0xB0,
240 ATA_CMD_MEDIA_LOCK = 0xDE,
241 ATA_CMD_MEDIA_UNLOCK = 0xDF,
242 /* marked obsolete in the ATA/ATAPI-7 spec */
243 ATA_CMD_RESTORE = 0x10,
244 /* EXABYTE specific */
245 ATA_EXABYTE_ENABLE_NEST = 0xF0,
246
247 /* READ_LOG_EXT pages */
248 ATA_LOG_SATA_NCQ = 0x10,
249
250 /* READ/WRITE LONG (obsolete) */
251 ATA_CMD_READ_LONG = 0x22,
252 ATA_CMD_READ_LONG_ONCE = 0x23,
253 ATA_CMD_WRITE_LONG = 0x32,
254 ATA_CMD_WRITE_LONG_ONCE = 0x33,
255
256 /* SETFEATURES stuff */
257 SETFEATURES_XFER = 0x03,
258 XFER_UDMA_7 = 0x47,
259 XFER_UDMA_6 = 0x46,
260 XFER_UDMA_5 = 0x45,
261 XFER_UDMA_4 = 0x44,
262 XFER_UDMA_3 = 0x43,
263 XFER_UDMA_2 = 0x42,
264 XFER_UDMA_1 = 0x41,
265 XFER_UDMA_0 = 0x40,
266 XFER_MW_DMA_4 = 0x24, /* CFA only */
267 XFER_MW_DMA_3 = 0x23, /* CFA only */
268 XFER_MW_DMA_2 = 0x22,
269 XFER_MW_DMA_1 = 0x21,
270 XFER_MW_DMA_0 = 0x20,
271 XFER_SW_DMA_2 = 0x12,
272 XFER_SW_DMA_1 = 0x11,
273 XFER_SW_DMA_0 = 0x10,
274 XFER_PIO_6 = 0x0E, /* CFA only */
275 XFER_PIO_5 = 0x0D, /* CFA only */
276 XFER_PIO_4 = 0x0C,
277 XFER_PIO_3 = 0x0B,
278 XFER_PIO_2 = 0x0A,
279 XFER_PIO_1 = 0x09,
280 XFER_PIO_0 = 0x08,
281 XFER_PIO_SLOW = 0x00,
282
283 SETFEATURES_WC_ON = 0x02, /* Enable write cache */
284 SETFEATURES_WC_OFF = 0x82, /* Disable write cache */
285
286 /* Enable/Disable Automatic Acoustic Management */
287 SETFEATURES_AAM_ON = 0x42,
288 SETFEATURES_AAM_OFF = 0xC2,
289
290 SETFEATURES_SPINUP = 0x07, /* Spin-up drive */
291
292 SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
293 SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
294
295 /* SETFEATURE Sector counts for SATA features */
296 SATA_AN = 0x05, /* Asynchronous Notification */
297 SATA_DIPM = 0x03, /* Device Initiated Power Management */
298
299 /* feature values for SET_MAX */
300 ATA_SET_MAX_ADDR = 0x00,
301 ATA_SET_MAX_PASSWD = 0x01,
302 ATA_SET_MAX_LOCK = 0x02,
303 ATA_SET_MAX_UNLOCK = 0x03,
304 ATA_SET_MAX_FREEZE_LOCK = 0x04,
305
306 /* feature values for DEVICE CONFIGURATION OVERLAY */
307 ATA_DCO_RESTORE = 0xC0,
308 ATA_DCO_FREEZE_LOCK = 0xC1,
309 ATA_DCO_IDENTIFY = 0xC2,
310 ATA_DCO_SET = 0xC3,
311
312 /* feature values for SMART */
313 ATA_SMART_ENABLE = 0xD8,
314 ATA_SMART_READ_VALUES = 0xD0,
315 ATA_SMART_READ_THRESHOLDS = 0xD1,
316
317 /* password used in LBA Mid / LBA High for executing SMART commands */
318 ATA_SMART_LBAM_PASS = 0x4F,
319 ATA_SMART_LBAH_PASS = 0xC2,
320
321 /* ATAPI stuff */
322 ATAPI_PKT_DMA = (1 << 0),
323 ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
324 0=to device, 1=to host */
325 ATAPI_CDB_LEN = 16,
326
327 /* PMP stuff */
328 SATA_PMP_MAX_PORTS = 15,
329 SATA_PMP_CTRL_PORT = 15,
330
331 SATA_PMP_GSCR_DWORDS = 128,
332 SATA_PMP_GSCR_PROD_ID = 0,
333 SATA_PMP_GSCR_REV = 1,
334 SATA_PMP_GSCR_PORT_INFO = 2,
335 SATA_PMP_GSCR_ERROR = 32,
336 SATA_PMP_GSCR_ERROR_EN = 33,
337 SATA_PMP_GSCR_FEAT = 64,
338 SATA_PMP_GSCR_FEAT_EN = 96,
339
340 SATA_PMP_PSCR_STATUS = 0,
341 SATA_PMP_PSCR_ERROR = 1,
342 SATA_PMP_PSCR_CONTROL = 2,
343
344 SATA_PMP_FEAT_BIST = (1 << 0),
345 SATA_PMP_FEAT_PMREQ = (1 << 1),
346 SATA_PMP_FEAT_DYNSSC = (1 << 2),
347 SATA_PMP_FEAT_NOTIFY = (1 << 3),
348
349 /* cable types */
350 ATA_CBL_NONE = 0,
351 ATA_CBL_PATA40 = 1,
352 ATA_CBL_PATA80 = 2,
353 ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */
354 ATA_CBL_PATA_UNK = 4, /* don't know, maybe 80c? */
355 ATA_CBL_PATA_IGN = 5, /* don't know, ignore cable handling */
356 ATA_CBL_SATA = 6,
357
358 /* SATA Status and Control Registers */
359 SCR_STATUS = 0,
360 SCR_ERROR = 1,
361 SCR_CONTROL = 2,
362 SCR_ACTIVE = 3,
363 SCR_NOTIFICATION = 4,
364
365 /* SError bits */
366 SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */
367 SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */
368 SERR_DATA = (1 << 8), /* unrecovered data error */
369 SERR_PERSISTENT = (1 << 9), /* persistent data/comm error */
370 SERR_PROTOCOL = (1 << 10), /* protocol violation */
371 SERR_INTERNAL = (1 << 11), /* host internal error */
372 SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */
373 SERR_PHY_INT_ERR = (1 << 17), /* PHY internal error */
374 SERR_COMM_WAKE = (1 << 18), /* Comm wake */
375 SERR_10B_8B_ERR = (1 << 19), /* 10b to 8b decode error */
376 SERR_DISPARITY = (1 << 20), /* Disparity */
377 SERR_CRC = (1 << 21), /* CRC error */
378 SERR_HANDSHAKE = (1 << 22), /* Handshake error */
379 SERR_LINK_SEQ_ERR = (1 << 23), /* Link sequence error */
380 SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state trans. error */
381 SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */
382 SERR_DEV_XCHG = (1 << 26), /* device exchanged */
383
384 /* struct ata_taskfile flags */
385 ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */
386 ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
387 ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */
388 ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
389 ATA_TFLAG_LBA = (1 << 4), /* enable LBA */
390 ATA_TFLAG_FUA = (1 << 5), /* enable FUA */
391 ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */
392
393 /* protocol flags */
394 ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */
395 ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */
396 ATA_PROT_FLAG_DATA = ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
397 ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */
398 ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */
399 };
400
401 enum ata_tf_protocols {
402 /* ATA taskfile protocols */
403 ATA_PROT_UNKNOWN, /* unknown/invalid */
404 ATA_PROT_NODATA, /* no data */
405 ATA_PROT_PIO, /* PIO data xfer */
406 ATA_PROT_DMA, /* DMA */
407 ATA_PROT_NCQ, /* NCQ */
408 ATAPI_PROT_NODATA, /* packet command, no data */
409 ATAPI_PROT_PIO, /* packet command, PIO data xfer*/
410 ATAPI_PROT_DMA, /* packet command with special DMA sauce */
411 };
412
413 enum ata_ioctls {
414 ATA_IOC_GET_IO32 = 0x309,
415 ATA_IOC_SET_IO32 = 0x324,
416 };
417
418 /* core structures */
419
420 struct ata_prd {
421 __le32 addr;
422 __le32 flags_len;
423 };
424
425 struct ata_taskfile {
426 unsigned long flags; /* ATA_TFLAG_xxx */
427 u8 protocol; /* ATA_PROT_xxx */
428
429 u8 ctl; /* control reg */
430
431 u8 hob_feature; /* additional data */
432 u8 hob_nsect; /* to support LBA48 */
433 u8 hob_lbal;
434 u8 hob_lbam;
435 u8 hob_lbah;
436
437 u8 feature;
438 u8 nsect;
439 u8 lbal;
440 u8 lbam;
441 u8 lbah;
442
443 u8 device;
444
445 u8 command; /* IO operation */
446 };
447
448 /*
449 * protocol tests
450 */
451 static inline unsigned int ata_prot_flags(u8 prot)
452 {
453 switch (prot) {
454 case ATA_PROT_NODATA:
455 return 0;
456 case ATA_PROT_PIO:
457 return ATA_PROT_FLAG_PIO;
458 case ATA_PROT_DMA:
459 return ATA_PROT_FLAG_DMA;
460 case ATA_PROT_NCQ:
461 return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
462 case ATAPI_PROT_NODATA:
463 return ATA_PROT_FLAG_ATAPI;
464 case ATAPI_PROT_PIO:
465 return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
466 case ATAPI_PROT_DMA:
467 return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
468 }
469 return 0;
470 }
471
472 static inline int ata_is_atapi(u8 prot)
473 {
474 return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
475 }
476
477 static inline int ata_is_nodata(u8 prot)
478 {
479 return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
480 }
481
482 static inline int ata_is_pio(u8 prot)
483 {
484 return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
485 }
486
487 static inline int ata_is_dma(u8 prot)
488 {
489 return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
490 }
491
492 static inline int ata_is_ncq(u8 prot)
493 {
494 return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
495 }
496
497 static inline int ata_is_data(u8 prot)
498 {
499 return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
500 }
501
502 /*
503 * id tests
504 */
505 #define ata_id_is_ata(id) (((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
506 #define ata_id_has_lba(id) ((id)[ATA_ID_CAPABILITY] & (1 << 9))
507 #define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8))
508 #define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
509 #define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
510 #define ata_id_removeable(id) ((id)[ATA_ID_CONFIG] & (1 << 7))
511 #define ata_id_has_atapi_AN(id) \
512 ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
513 ((id)[78] & (1 << 5)) )
514 #define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
515 #define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
516 #define ata_id_u32(id,n) \
517 (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
518 #define ata_id_u64(id,n) \
519 ( ((u64) (id)[(n) + 3] << 48) | \
520 ((u64) (id)[(n) + 2] << 32) | \
521 ((u64) (id)[(n) + 1] << 16) | \
522 ((u64) (id)[(n) + 0]) )
523
524 #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
525
526 static inline bool ata_id_has_hipm(const u16 *id)
527 {
528 u16 val = id[76];
529
530 if (val == 0 || val == 0xffff)
531 return false;
532
533 return val & (1 << 9);
534 }
535
536 static inline bool ata_id_has_dipm(const u16 *id)
537 {
538 u16 val = id[78];
539
540 if (val == 0 || val == 0xffff)
541 return false;
542
543 return val & (1 << 3);
544 }
545
546
547 static inline int ata_id_has_fua(const u16 *id)
548 {
549 if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
550 return 0;
551 return id[ATA_ID_CFSSE] & (1 << 6);
552 }
553
554 static inline int ata_id_has_flush(const u16 *id)
555 {
556 if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
557 return 0;
558 return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
559 }
560
561 static inline int ata_id_has_flush_ext(const u16 *id)
562 {
563 if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
564 return 0;
565 return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
566 }
567
568 static inline int ata_id_has_lba48(const u16 *id)
569 {
570 if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
571 return 0;
572 if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
573 return 0;
574 return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
575 }
576
577 static inline int ata_id_hpa_enabled(const u16 *id)
578 {
579 /* Yes children, word 83 valid bits cover word 82 data */
580 if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
581 return 0;
582 /* And 87 covers 85-87 */
583 if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
584 return 0;
585 /* Check command sets enabled as well as supported */
586 if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
587 return 0;
588 return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
589 }
590
591 static inline int ata_id_has_wcache(const u16 *id)
592 {
593 /* Yes children, word 83 valid bits cover word 82 data */
594 if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
595 return 0;
596 return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
597 }
598
599 static inline int ata_id_has_pm(const u16 *id)
600 {
601 if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
602 return 0;
603 return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
604 }
605
606 static inline int ata_id_rahead_enabled(const u16 *id)
607 {
608 if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
609 return 0;
610 return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
611 }
612
613 static inline int ata_id_wcache_enabled(const u16 *id)
614 {
615 if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
616 return 0;
617 return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
618 }
619
620 /**
621 * ata_id_major_version - get ATA level of drive
622 * @id: Identify data
623 *
624 * Caveats:
625 * ATA-1 considers identify optional
626 * ATA-2 introduces mandatory identify
627 * ATA-3 introduces word 80 and accurate reporting
628 *
629 * The practical impact of this is that ata_id_major_version cannot
630 * reliably report on drives below ATA3.
631 */
632
633 static inline unsigned int ata_id_major_version(const u16 *id)
634 {
635 unsigned int mver;
636
637 if (id[ATA_ID_MAJOR_VER] == 0xFFFF)
638 return 0;
639
640 for (mver = 14; mver >= 1; mver--)
641 if (id[ATA_ID_MAJOR_VER] & (1 << mver))
642 break;
643 return mver;
644 }
645
646 static inline int ata_id_is_sata(const u16 *id)
647 {
648 /*
649 * See if word 93 is 0 AND drive is at least ATA-5 compatible
650 * verifying that word 80 by casting it to a signed type --
651 * this trick allows us to filter out the reserved values of
652 * 0x0000 and 0xffff along with the earlier ATA revisions...
653 */
654 if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020)
655 return 1;
656 return 0;
657 }
658
659 static inline int ata_id_has_tpm(const u16 *id)
660 {
661 /* The TPM bits are only valid on ATA8 */
662 if (ata_id_major_version(id) < 8)
663 return 0;
664 if ((id[48] & 0xC000) != 0x4000)
665 return 0;
666 return id[48] & (1 << 0);
667 }
668
669 static inline int ata_id_has_dword_io(const u16 *id)
670 {
671 /* ATA 8 reuses this flag for "trusted" computing */
672 if (ata_id_major_version(id) > 7)
673 return 0;
674 if (id[ATA_ID_DWORD_IO] & (1 << 0))
675 return 1;
676 return 0;
677 }
678
679 static inline int ata_id_has_unload(const u16 *id)
680 {
681 if (ata_id_major_version(id) >= 7 &&
682 (id[ATA_ID_CFSSE] & 0xC000) == 0x4000 &&
683 id[ATA_ID_CFSSE] & (1 << 13))
684 return 1;
685 return 0;
686 }
687
688 static inline int ata_id_current_chs_valid(const u16 *id)
689 {
690 /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
691 has not been issued to the device then the values of
692 id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
693 return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
694 id[ATA_ID_CUR_CYLS] && /* cylinders in current translation */
695 id[ATA_ID_CUR_HEADS] && /* heads in current translation */
696 id[ATA_ID_CUR_HEADS] <= 16 &&
697 id[ATA_ID_CUR_SECTORS]; /* sectors in current translation */
698 }
699
700 static inline int ata_id_is_cfa(const u16 *id)
701 {
702 if (id[ATA_ID_CONFIG] == 0x848A) /* Standard CF */
703 return 1;
704 /* Could be CF hiding as standard ATA */
705 if (ata_id_major_version(id) >= 3 &&
706 id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
707 (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
708 return 1;
709 return 0;
710 }
711
712 static inline int ata_id_is_ssd(const u16 *id)
713 {
714 return id[ATA_ID_ROT_SPEED] == 0x01;
715 }
716
717 static inline int ata_drive_40wire(const u16 *dev_id)
718 {
719 if (ata_id_is_sata(dev_id))
720 return 0; /* SATA */
721 if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
722 return 0; /* 80 wire */
723 return 1;
724 }
725
726 static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
727 {
728 if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
729 return 0; /* 80 wire */
730 return 1;
731 }
732
733 static inline int atapi_cdb_len(const u16 *dev_id)
734 {
735 u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
736 switch (tmp) {
737 case 0: return 12;
738 case 1: return 16;
739 default: return -1;
740 }
741 }
742
743 static inline int atapi_command_packet_set(const u16 *dev_id)
744 {
745 return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
746 }
747
748 static inline int atapi_id_dmadir(const u16 *dev_id)
749 {
750 return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
751 }
752
753 static inline int is_multi_taskfile(struct ata_taskfile *tf)
754 {
755 return (tf->command == ATA_CMD_READ_MULTI) ||
756 (tf->command == ATA_CMD_WRITE_MULTI) ||
757 (tf->command == ATA_CMD_READ_MULTI_EXT) ||
758 (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
759 (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
760 }
761
762 static inline int ata_ok(u8 status)
763 {
764 return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
765 == ATA_DRDY);
766 }
767
768 static inline int lba_28_ok(u64 block, u32 n_block)
769 {
770 /* check the ending block number */
771 return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
772 }
773
774 static inline int lba_48_ok(u64 block, u32 n_block)
775 {
776 /* check the ending block number */
777 return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
778 }
779
780 #define sata_pmp_gscr_vendor(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)
781 #define sata_pmp_gscr_devid(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16)
782 #define sata_pmp_gscr_rev(gscr) (((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff)
783 #define sata_pmp_gscr_ports(gscr) ((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf)
784
785 #endif /* __LINUX_ATA_H__ */
Linux kernel - Deliverables
This page took 0.046943 seconds and 5 git commands to generate.