include/linux/brcmphy.h

   1 #ifndef _LINUX_BRCMPHY_H
   2 #define _LINUX_BRCMPHY_H
   3
   4 #define PHY_ID_BCM50610                 0x0143bd60
   5 #define PHY_ID_BCM50610M                0x0143bd70
   6 #define PHY_ID_BCM5241                  0x0143bc30
   7 #define PHY_ID_BCMAC131                 0x0143bc70
   8 #define PHY_ID_BCM5481                  0x0143bca0
   9 #define PHY_ID_BCM5482                  0x0143bcb0
  10 #define PHY_ID_BCM5411                  0x00206070
  11 #define PHY_ID_BCM5421                  0x002060e0
  12 #define PHY_ID_BCM5464                  0x002060b0
  13 #define PHY_ID_BCM5461                  0x002060c0
  14 #define PHY_ID_BCM57780                 0x03625d90
  15
  16 #define PHY_ID_BCM7366                  0x600d8490
  17 #define PHY_ID_BCM7439                  0x600d8480
  18 #define PHY_ID_BCM7445                  0x600d8510
  19
  20 #define PHY_BCM_OUI_MASK                0xfffffc00
  21 #define PHY_BCM_OUI_1                   0x00206000
  22 #define PHY_BCM_OUI_2                   0x0143bc00
  23 #define PHY_BCM_OUI_3                   0x03625c00
  24 #define PHY_BCM_OUI_4                   0x600d0000
  25 #define PHY_BCM_OUI_5                   0x03625e00
  26
  27
  28 #define PHY_BCM_FLAGS_MODE_COPPER       0x00000001
  29 #define PHY_BCM_FLAGS_MODE_1000BX       0x00000002
  30 #define PHY_BCM_FLAGS_INTF_SGMII        0x00000010
  31 #define PHY_BCM_FLAGS_INTF_XAUI         0x00000020
  32 #define PHY_BRCM_WIRESPEED_ENABLE       0x00000100
  33 #define PHY_BRCM_AUTO_PWRDWN_ENABLE     0x00000200
  34 #define PHY_BRCM_RX_REFCLK_UNUSED       0x00000400
  35 #define PHY_BRCM_STD_IBND_DISABLE       0x00000800
  36 #define PHY_BRCM_EXT_IBND_RX_ENABLE     0x00001000
  37 #define PHY_BRCM_EXT_IBND_TX_ENABLE     0x00002000
  38 #define PHY_BRCM_CLEAR_RGMII_MODE       0x00004000
  39 #define PHY_BRCM_DIS_TXCRXC_NOENRGY     0x00008000
  40 /* Broadcom BCM7xxx specific workarounds */
  41 #define PHY_BRCM_100MBPS_WAR            0x00010000
  42 #define PHY_BCM_FLAGS_VALID             0x80000000
  43
  44 /* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */
  45 #define MII_BCM54XX_ECR         0x10    /* BCM54xx extended control register */
  46 #define MII_BCM54XX_ECR_IM      0x1000  /* Interrupt mask */
  47 #define MII_BCM54XX_ECR_IF      0x0800  /* Interrupt force */
  48
  49 #define MII_BCM54XX_ESR         0x11    /* BCM54xx extended status register */
  50 #define MII_BCM54XX_ESR_IS      0x1000  /* Interrupt status */
  51
  52 #define MII_BCM54XX_EXP_DATA    0x15    /* Expansion register data */
  53 #define MII_BCM54XX_EXP_SEL     0x17    /* Expansion register select */
  54 #define MII_BCM54XX_EXP_SEL_SSD 0x0e00  /* Secondary SerDes select */
  55 #define MII_BCM54XX_EXP_SEL_ER  0x0f00  /* Expansion register select */
  56
  57 #define MII_BCM54XX_AUX_CTL     0x18    /* Auxiliary control register */
  58 #define MII_BCM54XX_ISR         0x1a    /* BCM54xx interrupt status register */
  59 #define MII_BCM54XX_IMR         0x1b    /* BCM54xx interrupt mask register */
  60 #define MII_BCM54XX_INT_CRCERR  0x0001  /* CRC error */
  61 #define MII_BCM54XX_INT_LINK    0x0002  /* Link status changed */
  62 #define MII_BCM54XX_INT_SPEED   0x0004  /* Link speed change */
  63 #define MII_BCM54XX_INT_DUPLEX  0x0008  /* Duplex mode changed */
  64 #define MII_BCM54XX_INT_LRS     0x0010  /* Local receiver status changed */
  65 #define MII_BCM54XX_INT_RRS     0x0020  /* Remote receiver status changed */
  66 #define MII_BCM54XX_INT_SSERR   0x0040  /* Scrambler synchronization error */
  67 #define MII_BCM54XX_INT_UHCD    0x0080  /* Unsupported HCD negotiated */
  68 #define MII_BCM54XX_INT_NHCD    0x0100  /* No HCD */
  69 #define MII_BCM54XX_INT_NHCDL   0x0200  /* No HCD link */
  70 #define MII_BCM54XX_INT_ANPR    0x0400  /* Auto-negotiation page received */
  71 #define MII_BCM54XX_INT_LC      0x0800  /* All counters below 128 */
  72 #define MII_BCM54XX_INT_HC      0x1000  /* Counter above 32768 */
  73 #define MII_BCM54XX_INT_MDIX    0x2000  /* MDIX status change */
  74 #define MII_BCM54XX_INT_PSERR   0x4000  /* Pair swap error */
  75
  76 #define MII_BCM54XX_SHD         0x1c    /* 0x1c shadow registers */
  77 #define MII_BCM54XX_SHD_WRITE   0x8000
  78 #define MII_BCM54XX_SHD_VAL(x)  ((x & 0x1f) << 10)
  79 #define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
  80
  81 /*
  82  * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
  83  */
  84 #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL       0x0000
  85 #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB          0x0400
  86 #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA       0x0800
  87
  88 #define MII_BCM54XX_AUXCTL_MISC_WREN    0x8000
  89 #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX     0x0200
  90 #define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC      0x7000
  91 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007
  92
  93 #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL       0x0000
  94
  95 #endif /* _LINUX_BRCMPHY_H */