Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

[deliverable/linux.git] / include / linux / clk-provider.h

/*
 *  linux/include/linux/clk-provider.h
 *
 *  Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
 *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#ifndef __LINUX_CLK_PROVIDER_H
#define __LINUX_CLK_PROVIDER_H

#include <linux/io.h>
#include <linux/of.h>

#ifdef CONFIG_COMMON_CLK

/*
 * flags used across common struct clk.  these flags should only affect the
 * top-level framework.  custom flags for dealing with hardware specifics
 * belong in struct clk_foo
 */
#define CLK_SET_RATE_GATE       BIT(0) /* must be gated across rate change */
#define CLK_SET_PARENT_GATE     BIT(1) /* must be gated across re-parent */
#define CLK_SET_RATE_PARENT     BIT(2) /* propagate rate change up one level */
#define CLK_IGNORE_UNUSED       BIT(3) /* do not gate even if unused */
#define CLK_IS_ROOT             BIT(4) /* root clk, has no parent */
#define CLK_IS_BASIC            BIT(5) /* Basic clk, can't do a to_clk_foo() */
#define CLK_GET_RATE_NOCACHE    BIT(6) /* do not use the cached clk rate */
#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */
#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */
#define CLK_RECALC_NEW_RATES    BIT(9) /* recalc rates after notifications */
#define CLK_SET_RATE_UNGATE     BIT(10) /* clock needs to run to set rate */

struct clk;
struct clk_hw;
struct clk_core;
struct dentry;

/**
 * struct clk_rate_request - Structure encoding the clk constraints that
 * a clock user might require.
 *
 * @rate:               Requested clock rate. This field will be adjusted by
 *                      clock drivers according to hardware capabilities.
 * @min_rate:           Minimum rate imposed by clk users.
 * @max_rate:           Maximum rate imposed by clk users.
 * @best_parent_rate:   The best parent rate a parent can provide to fulfill the
 *                      requested constraints.
 * @best_parent_hw:     The most appropriate parent clock that fulfills the
 *                      requested constraints.
 *
 */
struct clk_rate_request {
        unsigned long rate;
        unsigned long min_rate;
        unsigned long max_rate;
        unsigned long best_parent_rate;
        struct clk_hw *best_parent_hw;
};

/**
 * struct clk_ops -  Callback operations for hardware clocks; these are to
 * be provided by the clock implementation, and will be called by drivers
 * through the clk_* api.
 *
 * @prepare:    Prepare the clock for enabling. This must not return until
 *              the clock is fully prepared, and it's safe to call clk_enable.
 *              This callback is intended to allow clock implementations to
 *              do any initialisation that may sleep. Called with
 *              prepare_lock held.
 *
 * @unprepare:  Release the clock from its prepared state. This will typically
 *              undo any work done in the @prepare callback. Called with
 *              prepare_lock held.
 *
 * @is_prepared: Queries the hardware to determine if the clock is prepared.
 *              This function is allowed to sleep. Optional, if this op is not
 *              set then the prepare count will be used.
 *
 * @unprepare_unused: Unprepare the clock atomically.  Only called from
 *              clk_disable_unused for prepare clocks with special needs.
 *              Called with prepare mutex held. This function may sleep.
 *
 * @enable:     Enable the clock atomically. This must not return until the
 *              clock is generating a valid clock signal, usable by consumer
 *              devices. Called with enable_lock held. This function must not
 *              sleep.
 *
 * @disable:    Disable the clock atomically. Called with enable_lock held.
 *              This function must not sleep.
 *
 * @is_enabled: Queries the hardware to determine if the clock is enabled.
 *              This function must not sleep. Optional, if this op is not
 *              set then the enable count will be used.
 *
 * @disable_unused: Disable the clock atomically.  Only called from
 *              clk_disable_unused for gate clocks with special needs.
 *              Called with enable_lock held.  This function must not
 *              sleep.
 *
 * @recalc_rate Recalculate the rate of this clock, by querying hardware. The
 *              parent rate is an input parameter.  It is up to the caller to
 *              ensure that the prepare_mutex is held across this call.
 *              Returns the calculated rate.  Optional, but recommended - if
 *              this op is not set then clock rate will be initialized to 0.
 *
 * @round_rate: Given a target rate as input, returns the closest rate actually
 *              supported by the clock. The parent rate is an input/output
 *              parameter.
 *
 * @determine_rate: Given a target rate as input, returns the closest rate
 *              actually supported by the clock, and optionally the parent clock
 *              that should be used to provide the clock rate.
 *
 * @set_parent: Change the input source of this clock; for clocks with multiple
 *              possible parents specify a new parent by passing in the index
 *              as a u8 corresponding to the parent in either the .parent_names
 *              or .parents arrays.  This function in affect translates an
 *              array index into the value programmed into the hardware.
 *              Returns 0 on success, -EERROR otherwise.
 *
 * @get_parent: Queries the hardware to determine the parent of a clock.  The
 *              return value is a u8 which specifies the index corresponding to
 *              the parent clock.  This index can be applied to either the
 *              .parent_names or .parents arrays.  In short, this function
 *              translates the parent value read from hardware into an array
 *              index.  Currently only called when the clock is initialized by
 *              __clk_init.  This callback is mandatory for clocks with
 *              multiple parents.  It is optional (and unnecessary) for clocks
 *              with 0 or 1 parents.
 *
 * @set_rate:   Change the rate of this clock. The requested rate is specified
 *              by the second argument, which should typically be the return
 *              of .round_rate call.  The third argument gives the parent rate
 *              which is likely helpful for most .set_rate implementation.
 *              Returns 0 on success, -EERROR otherwise.
 *
 * @set_rate_and_parent: Change the rate and the parent of this clock. The
 *              requested rate is specified by the second argument, which
 *              should typically be the return of .round_rate call.  The
 *              third argument gives the parent rate which is likely helpful
 *              for most .set_rate_and_parent implementation. The fourth
 *              argument gives the parent index. This callback is optional (and
 *              unnecessary) for clocks with 0 or 1 parents as well as
 *              for clocks that can tolerate switching the rate and the parent
 *              separately via calls to .set_parent and .set_rate.
 *              Returns 0 on success, -EERROR otherwise.
 *
 * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
 *              is expressed in ppb (parts per billion). The parent accuracy is
 *              an input parameter.
 *              Returns the calculated accuracy.  Optional - if this op is not
 *              set then clock accuracy will be initialized to parent accuracy
 *              or 0 (perfect clock) if clock has no parent.
 *
 * @get_phase:  Queries the hardware to get the current phase of a clock.
 *              Returned values are 0-359 degrees on success, negative
 *              error codes on failure.
 *
 * @set_phase:  Shift the phase this clock signal in degrees specified
 *              by the second argument. Valid values for degrees are
 *              0-359. Return 0 on success, otherwise -EERROR.
 *
 * @init:       Perform platform-specific initialization magic.
 *              This is not not used by any of the basic clock types.
 *              Please consider other ways of solving initialization problems
 *              before using this callback, as its use is discouraged.
 *
 * @debug_init: Set up type-specific debugfs entries for this clock.  This
 *              is called once, after the debugfs directory entry for this
 *              clock has been created.  The dentry pointer representing that
 *              directory is provided as an argument.  Called with
 *              prepare_lock held.  Returns 0 on success, -EERROR otherwise.
 *
 *
 * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
 * implementations to split any work between atomic (enable) and sleepable
 * (prepare) contexts.  If enabling a clock requires code that might sleep,
 * this must be done in clk_prepare.  Clock enable code that will never be
 * called in a sleepable context may be implemented in clk_enable.
 *
 * Typically, drivers will call clk_prepare when a clock may be needed later
 * (eg. when a device is opened), and clk_enable when the clock is actually
 * required (eg. from an interrupt). Note that clk_prepare MUST have been
 * called before clk_enable.
 */
struct clk_ops {
        int             (*prepare)(struct clk_hw *hw);
        void            (*unprepare)(struct clk_hw *hw);
        int             (*is_prepared)(struct clk_hw *hw);
        void            (*unprepare_unused)(struct clk_hw *hw);
        int             (*enable)(struct clk_hw *hw);
        void            (*disable)(struct clk_hw *hw);
        int             (*is_enabled)(struct clk_hw *hw);
        void            (*disable_unused)(struct clk_hw *hw);
        unsigned long   (*recalc_rate)(struct clk_hw *hw,
                                        unsigned long parent_rate);
        long            (*round_rate)(struct clk_hw *hw, unsigned long rate,
                                        unsigned long *parent_rate);
        int             (*determine_rate)(struct clk_hw *hw,
                                          struct clk_rate_request *req);
        int             (*set_parent)(struct clk_hw *hw, u8 index);
        u8              (*get_parent)(struct clk_hw *hw);
        int             (*set_rate)(struct clk_hw *hw, unsigned long rate,
                                    unsigned long parent_rate);
        int             (*set_rate_and_parent)(struct clk_hw *hw,
                                    unsigned long rate,
                                    unsigned long parent_rate, u8 index);
        unsigned long   (*recalc_accuracy)(struct clk_hw *hw,
                                           unsigned long parent_accuracy);
        int             (*get_phase)(struct clk_hw *hw);
        int             (*set_phase)(struct clk_hw *hw, int degrees);
        void            (*init)(struct clk_hw *hw);
        int             (*debug_init)(struct clk_hw *hw, struct dentry *dentry);
};

/**
 * struct clk_init_data - holds init data that's common to all clocks and is
 * shared between the clock provider and the common clock framework.
 *
 * @name: clock name
 * @ops: operations this clock supports
 * @parent_names: array of string names for all possible parents
 * @num_parents: number of possible parents
 * @flags: framework-level hints and quirks
 */
struct clk_init_data {
        const char              *name;
        const struct clk_ops    *ops;
        const char              * const *parent_names;
        u8                      num_parents;
        unsigned long           flags;
};

/**
 * struct clk_hw - handle for traversing from a struct clk to its corresponding
 * hardware-specific structure.  struct clk_hw should be declared within struct
 * clk_foo and then referenced by the struct clk instance that uses struct
 * clk_foo's clk_ops
 *
 * @core: pointer to the struct clk_core instance that points back to this
 * struct clk_hw instance
 *
 * @clk: pointer to the per-user struct clk instance that can be used to call
 * into the clk API
 *
 * @init: pointer to struct clk_init_data that contains the init data shared
 * with the common clock framework.
 */
struct clk_hw {
        struct clk_core *core;
        struct clk *clk;
        const struct clk_init_data *init;
};

/*
 * DOC: Basic clock implementations common to many platforms
 *
 * Each basic clock hardware type is comprised of a structure describing the
 * clock hardware, implementations of the relevant callbacks in struct clk_ops,
 * unique flags for that hardware type, a registration function and an
 * alternative macro for static initialization
 */

/**
 * struct clk_fixed_rate - fixed-rate clock
 * @hw:         handle between common and hardware-specific interfaces
 * @fixed_rate: constant frequency of clock
 */
struct clk_fixed_rate {
        struct          clk_hw hw;
        unsigned long   fixed_rate;
        unsigned long   fixed_accuracy;
        u8              flags;
};

extern const struct clk_ops clk_fixed_rate_ops;
struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
                const char *parent_name, unsigned long flags,
                unsigned long fixed_rate);
struct clk *clk_register_fixed_rate_with_accuracy(struct device *dev,
                const char *name, const char *parent_name, unsigned long flags,
                unsigned long fixed_rate, unsigned long fixed_accuracy);

void of_fixed_clk_setup(struct device_node *np);

/**
 * struct clk_gate - gating clock
 *
 * @hw:         handle between common and hardware-specific interfaces
 * @reg:        register controlling gate
 * @bit_idx:    single bit controlling gate
 * @flags:      hardware-specific flags
 * @lock:       register lock
 *
 * Clock which can gate its output.  Implements .enable & .disable
 *
 * Flags:
 * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
 *      enable the clock.  Setting this flag does the opposite: setting the bit
 *      disable the clock and clearing it enables the clock
 * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
 *      of this register, and mask of gate bits are in higher 16-bit of this
 *      register.  While setting the gate bits, higher 16-bit should also be
 *      updated to indicate changing gate bits.
 */
struct clk_gate {
        struct clk_hw hw;
        void __iomem    *reg;
        u8              bit_idx;
        u8              flags;
        spinlock_t      *lock;
};

#define CLK_GATE_SET_TO_DISABLE         BIT(0)
#define CLK_GATE_HIWORD_MASK            BIT(1)

extern const struct clk_ops clk_gate_ops;
struct clk *clk_register_gate(struct device *dev, const char *name,
                const char *parent_name, unsigned long flags,
                void __iomem *reg, u8 bit_idx,
                u8 clk_gate_flags, spinlock_t *lock);
void clk_unregister_gate(struct clk *clk);

struct clk_div_table {
        unsigned int    val;
        unsigned int    div;
};

/**
 * struct clk_divider - adjustable divider clock
 *
 * @hw:         handle between common and hardware-specific interfaces
 * @reg:        register containing the divider
 * @shift:      shift to the divider bit field
 * @width:      width of the divider bit field
 * @table:      array of value/divider pairs, last entry should have div = 0
 * @lock:       register lock
 *
 * Clock with an adjustable divider affecting its output frequency.  Implements
 * .recalc_rate, .set_rate and .round_rate
 *
 * Flags:
 * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
 *      register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
 *      the raw value read from the register, with the value of zero considered
 *      invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
 * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
 *      the hardware register
 * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors.  For dividers which have
 *      CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
 *      Some hardware implementations gracefully handle this case and allow a
 *      zero divisor by not modifying their input clock
 *      (divide by one / bypass).
 * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit
 *      of this register, and mask of divider bits are in higher 16-bit of this
 *      register.  While setting the divider bits, higher 16-bit should also be
 *      updated to indicate changing divider bits.
 * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
 *      to the closest integer instead of the up one.
 * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
 *      not be changed by the clock framework.
 * CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_ONE_BASED
 *      except when the value read from the register is zero, the divisor is
 *      2^width of the field.
 */
struct clk_divider {
        struct clk_hw   hw;
        void __iomem    *reg;
        u8              shift;
        u8              width;
        u8              flags;
        const struct clk_div_table      *table;
        spinlock_t      *lock;
};

#define CLK_DIVIDER_ONE_BASED           BIT(0)
#define CLK_DIVIDER_POWER_OF_TWO        BIT(1)
#define CLK_DIVIDER_ALLOW_ZERO          BIT(2)
#define CLK_DIVIDER_HIWORD_MASK         BIT(3)
#define CLK_DIVIDER_ROUND_CLOSEST       BIT(4)
#define CLK_DIVIDER_READ_ONLY           BIT(5)
#define CLK_DIVIDER_MAX_AT_ZERO         BIT(6)

extern const struct clk_ops clk_divider_ops;

unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
                unsigned int val, const struct clk_div_table *table,
                unsigned long flags);
long divider_round_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long *prate, const struct clk_div_table *table,
                u8 width, unsigned long flags);
int divider_get_val(unsigned long rate, unsigned long parent_rate,
                const struct clk_div_table *table, u8 width,
                unsigned long flags);

struct clk *clk_register_divider(struct device *dev, const char *name,
                const char *parent_name, unsigned long flags,
                void __iomem *reg, u8 shift, u8 width,
                u8 clk_divider_flags, spinlock_t *lock);
struct clk *clk_register_divider_table(struct device *dev, const char *name,
                const char *parent_name, unsigned long flags,
                void __iomem *reg, u8 shift, u8 width,
                u8 clk_divider_flags, const struct clk_div_table *table,
                spinlock_t *lock);
void clk_unregister_divider(struct clk *clk);

/**
 * struct clk_mux - multiplexer clock
 *
 * @hw:         handle between common and hardware-specific interfaces
 * @reg:        register controlling multiplexer
 * @shift:      shift to multiplexer bit field
 * @width:      width of mutliplexer bit field
 * @flags:      hardware-specific flags
 * @lock:       register lock
 *
 * Clock with multiple selectable parents.  Implements .get_parent, .set_parent
 * and .recalc_rate
 *
 * Flags:
 * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
 * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
 * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this
 *      register, and mask of mux bits are in higher 16-bit of this register.
 *      While setting the mux bits, higher 16-bit should also be updated to
 *      indicate changing mux bits.
 * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
 *      frequency.
 */
struct clk_mux {
        struct clk_hw   hw;
        void __iomem    *reg;
        u32             *table;
        u32             mask;
        u8              shift;
        u8              flags;
        spinlock_t      *lock;
};

#define CLK_MUX_INDEX_ONE               BIT(0)
#define CLK_MUX_INDEX_BIT               BIT(1)
#define CLK_MUX_HIWORD_MASK             BIT(2)
#define CLK_MUX_READ_ONLY               BIT(3) /* mux can't be changed */
#define CLK_MUX_ROUND_CLOSEST           BIT(4)

extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;

struct clk *clk_register_mux(struct device *dev, const char *name,
                const char * const *parent_names, u8 num_parents,
                unsigned long flags,
                void __iomem *reg, u8 shift, u8 width,
                u8 clk_mux_flags, spinlock_t *lock);

struct clk *clk_register_mux_table(struct device *dev, const char *name,
                const char * const *parent_names, u8 num_parents,
                unsigned long flags,
                void __iomem *reg, u8 shift, u32 mask,
                u8 clk_mux_flags, u32 *table, spinlock_t *lock);

void clk_unregister_mux(struct clk *clk);

void of_fixed_factor_clk_setup(struct device_node *node);

/**
 * struct clk_fixed_factor - fixed multiplier and divider clock
 *
 * @hw:         handle between common and hardware-specific interfaces
 * @mult:       multiplier
 * @div:        divider
 *
 * Clock with a fixed multiplier and divider. The output frequency is the
 * parent clock rate divided by div and multiplied by mult.
 * Implements .recalc_rate, .set_rate and .round_rate
 */

struct clk_fixed_factor {
        struct clk_hw   hw;
        unsigned int    mult;
        unsigned int    div;
};

extern const struct clk_ops clk_fixed_factor_ops;
struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
                const char *parent_name, unsigned long flags,
                unsigned int mult, unsigned int div);

/**
 * struct clk_fractional_divider - adjustable fractional divider clock
 *
 * @hw:         handle between common and hardware-specific interfaces
 * @reg:        register containing the divider
 * @mshift:     shift to the numerator bit field
 * @mwidth:     width of the numerator bit field
 * @nshift:     shift to the denominator bit field
 * @nwidth:     width of the denominator bit field
 * @lock:       register lock
 *
 * Clock with adjustable fractional divider affecting its output frequency.
 */
struct clk_fractional_divider {
        struct clk_hw   hw;
        void __iomem    *reg;
        u8              mshift;
        u8              mwidth;
        u32             mmask;
        u8              nshift;
        u8              nwidth;
        u32             nmask;
        u8              flags;
        spinlock_t      *lock;
};

extern const struct clk_ops clk_fractional_divider_ops;
struct clk *clk_register_fractional_divider(struct device *dev,
                const char *name, const char *parent_name, unsigned long flags,
                void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
                u8 clk_divider_flags, spinlock_t *lock);

/**
 * struct clk_multiplier - adjustable multiplier clock
 *
 * @hw:         handle between common and hardware-specific interfaces
 * @reg:        register containing the multiplier
 * @shift:      shift to the multiplier bit field
 * @width:      width of the multiplier bit field
 * @lock:       register lock
 *
 * Clock with an adjustable multiplier affecting its output frequency.
 * Implements .recalc_rate, .set_rate and .round_rate
 *
 * Flags:
 * CLK_MULTIPLIER_ZERO_BYPASS - By default, the multiplier is the value read
 *      from the register, with 0 being a valid value effectively
 *      zeroing the output clock rate. If CLK_MULTIPLIER_ZERO_BYPASS is
 *      set, then a null multiplier will be considered as a bypass,
 *      leaving the parent rate unmodified.
 * CLK_MULTIPLIER_ROUND_CLOSEST - Makes the best calculated divider to be
 *      rounded to the closest integer instead of the down one.
 */
struct clk_multiplier {
        struct clk_hw   hw;
        void __iomem    *reg;
        u8              shift;
        u8              width;
        u8              flags;
        spinlock_t      *lock;
};

#define CLK_MULTIPLIER_ZERO_BYPASS              BIT(0)
#define CLK_MULTIPLIER_ROUND_CLOSEST    BIT(1)

extern const struct clk_ops clk_multiplier_ops;

/***
 * struct clk_composite - aggregate clock of mux, divider and gate clocks
 *
 * @hw:         handle between common and hardware-specific interfaces
 * @mux_hw:     handle between composite and hardware-specific mux clock
 * @rate_hw:    handle between composite and hardware-specific rate clock
 * @gate_hw:    handle between composite and hardware-specific gate clock
 * @mux_ops:    clock ops for mux
 * @rate_ops:   clock ops for rate
 * @gate_ops:   clock ops for gate
 */
struct clk_composite {
        struct clk_hw   hw;
        struct clk_ops  ops;

        struct clk_hw   *mux_hw;
        struct clk_hw   *rate_hw;
        struct clk_hw   *gate_hw;

        const struct clk_ops    *mux_ops;
        const struct clk_ops    *rate_ops;
        const struct clk_ops    *gate_ops;
};

struct clk *clk_register_composite(struct device *dev, const char *name,
                const char * const *parent_names, int num_parents,
                struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
                struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
                struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
                unsigned long flags);

/***
 * struct clk_gpio_gate - gpio gated clock
 *
 * @hw:         handle between common and hardware-specific interfaces
 * @gpiod:      gpio descriptor
 *
 * Clock with a gpio control for enabling and disabling the parent clock.
 * Implements .enable, .disable and .is_enabled
 */

struct clk_gpio {
        struct clk_hw   hw;
        struct gpio_desc *gpiod;
};

extern const struct clk_ops clk_gpio_gate_ops;
struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
                const char *parent_name, unsigned gpio, bool active_low,
                unsigned long flags);

void of_gpio_clk_gate_setup(struct device_node *node);

/**
 * struct clk_gpio_mux - gpio controlled clock multiplexer
 *
 * @hw:         see struct clk_gpio
 * @gpiod:      gpio descriptor to select the parent of this clock multiplexer
 *
 * Clock with a gpio control for selecting the parent clock.
 * Implements .get_parent, .set_parent and .determine_rate
 */

extern const struct clk_ops clk_gpio_mux_ops;
struct clk *clk_register_gpio_mux(struct device *dev, const char *name,
                const char * const *parent_names, u8 num_parents, unsigned gpio,
                bool active_low, unsigned long flags);

void of_gpio_mux_clk_setup(struct device_node *node);

/**
 * clk_register - allocate a new clock, register it and return an opaque cookie
 * @dev: device that is registering this clock
 * @hw: link to hardware-specific clock data
 *
 * clk_register is the primary interface for populating the clock tree with new
 * clock nodes.  It returns a pointer to the newly allocated struct clk which
 * cannot be dereferenced by driver code but may be used in conjuction with the
 * rest of the clock API.  In the event of an error clk_register will return an
 * error code; drivers must test for an error code after calling clk_register.
 */
struct clk *clk_register(struct device *dev, struct clk_hw *hw);
struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);

void clk_unregister(struct clk *clk);
void devm_clk_unregister(struct device *dev, struct clk *clk);

/* helper functions */
const char *__clk_get_name(const struct clk *clk);
const char *clk_hw_get_name(const struct clk_hw *hw);
struct clk_hw *__clk_get_hw(struct clk *clk);
unsigned int clk_hw_get_num_parents(const struct clk_hw *hw);
struct clk_hw *clk_hw_get_parent(const struct clk_hw *hw);
struct clk_hw *clk_hw_get_parent_by_index(const struct clk_hw *hw,
                                          unsigned int index);
unsigned int __clk_get_enable_count(struct clk *clk);
unsigned long clk_hw_get_rate(const struct clk_hw *hw);
unsigned long __clk_get_flags(struct clk *clk);
unsigned long clk_hw_get_flags(const struct clk_hw *hw);
bool clk_hw_is_prepared(const struct clk_hw *hw);
bool clk_hw_is_enabled(const struct clk_hw *hw);
bool __clk_is_enabled(struct clk *clk);
struct clk *__clk_lookup(const char *name);
int __clk_mux_determine_rate(struct clk_hw *hw,
                             struct clk_rate_request *req);
int __clk_determine_rate(struct clk_hw *core, struct clk_rate_request *req);
int __clk_mux_determine_rate_closest(struct clk_hw *hw,
                                     struct clk_rate_request *req);
void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent);
void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
                           unsigned long max_rate);

static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src)
{
        dst->clk = src->clk;
        dst->core = src->core;
}

/*
 * FIXME clock api without lock protection
 */
unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate);

struct of_device_id;

typedef void (*of_clk_init_cb_t)(struct device_node *);

struct clk_onecell_data {
        struct clk **clks;
        unsigned int clk_num;
};

extern struct of_device_id __clk_of_table;

#define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn)

#ifdef CONFIG_OF
int of_clk_add_provider(struct device_node *np,
                        struct clk *(*clk_src_get)(struct of_phandle_args *args,
                                                   void *data),
                        void *data);
void of_clk_del_provider(struct device_node *np);
struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
                                  void *data);
struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
int of_clk_get_parent_count(struct device_node *np);
int of_clk_parent_fill(struct device_node *np, const char **parents,
                       unsigned int size);
const char *of_clk_get_parent_name(struct device_node *np, int index);

void of_clk_init(const struct of_device_id *matches);

#else /* !CONFIG_OF */

static inline int of_clk_add_provider(struct device_node *np,
                        struct clk *(*clk_src_get)(struct of_phandle_args *args,
                                                   void *data),
                        void *data)
{
        return 0;
}
static inline void of_clk_del_provider(struct device_node *np) {}
static inline struct clk *of_clk_src_simple_get(
        struct of_phandle_args *clkspec, void *data)
{
        return ERR_PTR(-ENOENT);
}
static inline struct clk *of_clk_src_onecell_get(
        struct of_phandle_args *clkspec, void *data)
{
        return ERR_PTR(-ENOENT);
}
static inline int of_clk_get_parent_count(struct device_node *np)
{
        return 0;
}
static inline int of_clk_parent_fill(struct device_node *np,
                                     const char **parents, unsigned int size)
{
        return 0;
}
static inline const char *of_clk_get_parent_name(struct device_node *np,
                                                 int index)
{
        return NULL;
}
static inline void of_clk_init(const struct of_device_id *matches) {}
#endif /* CONFIG_OF */

/*
 * wrap access to peripherals in accessor routines
 * for improved portability across platforms
 */

#if IS_ENABLED(CONFIG_PPC)

static inline u32 clk_readl(u32 __iomem *reg)
{
        return ioread32be(reg);
}

static inline void clk_writel(u32 val, u32 __iomem *reg)
{
        iowrite32be(val, reg);
}

#else   /* platform dependent I/O accessors */

static inline u32 clk_readl(u32 __iomem *reg)
{
        return readl(reg);
}

static inline void clk_writel(u32 val, u32 __iomem *reg)
{
        writel(val, reg);
}

#endif  /* platform dependent I/O accessors */

#ifdef CONFIG_DEBUG_FS
struct dentry *clk_debugfs_add_file(struct clk_hw *hw, char *name, umode_t mode,
                                void *data, const struct file_operations *fops);
#endif

#endif /* CONFIG_COMMON_CLK */
#endif /* CLK_PROVIDER_H */