hwmon: lis3: use block read to access data registers
[deliverable/linux.git] / include / linux / lis3lv02d.h
1 #ifndef __LIS3LV02D_H_
2 #define __LIS3LV02D_H_
3
4 struct lis3lv02d_platform_data {
5 /* please note: the 'click' feature is only supported for
6 * LIS[32]02DL variants of the chip and will be ignored for
7 * others */
8 #define LIS3_CLICK_SINGLE_X (1 << 0)
9 #define LIS3_CLICK_DOUBLE_X (1 << 1)
10 #define LIS3_CLICK_SINGLE_Y (1 << 2)
11 #define LIS3_CLICK_DOUBLE_Y (1 << 3)
12 #define LIS3_CLICK_SINGLE_Z (1 << 4)
13 #define LIS3_CLICK_DOUBLE_Z (1 << 5)
14 unsigned char click_flags;
15 unsigned char click_thresh_x;
16 unsigned char click_thresh_y;
17 unsigned char click_thresh_z;
18 unsigned char click_time_limit;
19 unsigned char click_latency;
20 unsigned char click_window;
21
22 #define LIS3_IRQ1_DISABLE (0 << 0)
23 #define LIS3_IRQ1_FF_WU_1 (1 << 0)
24 #define LIS3_IRQ1_FF_WU_2 (2 << 0)
25 #define LIS3_IRQ1_FF_WU_12 (3 << 0)
26 #define LIS3_IRQ1_DATA_READY (4 << 0)
27 #define LIS3_IRQ1_CLICK (7 << 0)
28 #define LIS3_IRQ1_MASK (7 << 0)
29 #define LIS3_IRQ2_DISABLE (0 << 3)
30 #define LIS3_IRQ2_FF_WU_1 (1 << 3)
31 #define LIS3_IRQ2_FF_WU_2 (2 << 3)
32 #define LIS3_IRQ2_FF_WU_12 (3 << 3)
33 #define LIS3_IRQ2_DATA_READY (4 << 3)
34 #define LIS3_IRQ2_CLICK (7 << 3)
35 #define LIS3_IRQ2_MASK (7 << 3)
36 #define LIS3_IRQ_OPEN_DRAIN (1 << 6)
37 #define LIS3_IRQ_ACTIVE_LOW (1 << 7)
38 unsigned char irq_cfg;
39 unsigned char irq_flags1; /* Additional irq edge / level flags */
40 unsigned char irq_flags2; /* Additional irq edge / level flags */
41 unsigned char duration1;
42 unsigned char duration2;
43 #define LIS3_WAKEUP_X_LO (1 << 0)
44 #define LIS3_WAKEUP_X_HI (1 << 1)
45 #define LIS3_WAKEUP_Y_LO (1 << 2)
46 #define LIS3_WAKEUP_Y_HI (1 << 3)
47 #define LIS3_WAKEUP_Z_LO (1 << 4)
48 #define LIS3_WAKEUP_Z_HI (1 << 5)
49 unsigned char wakeup_flags;
50 unsigned char wakeup_thresh;
51 unsigned char wakeup_flags2;
52 unsigned char wakeup_thresh2;
53 #define LIS3_HIPASS_CUTFF_8HZ 0
54 #define LIS3_HIPASS_CUTFF_4HZ 1
55 #define LIS3_HIPASS_CUTFF_2HZ 2
56 #define LIS3_HIPASS_CUTFF_1HZ 3
57 #define LIS3_HIPASS1_DISABLE (1 << 2)
58 #define LIS3_HIPASS2_DISABLE (1 << 3)
59 unsigned char hipass_ctrl;
60 #define LIS3_NO_MAP 0
61 #define LIS3_DEV_X 1
62 #define LIS3_DEV_Y 2
63 #define LIS3_DEV_Z 3
64 #define LIS3_INV_DEV_X -1
65 #define LIS3_INV_DEV_Y -2
66 #define LIS3_INV_DEV_Z -3
67 s8 axis_x;
68 s8 axis_y;
69 s8 axis_z;
70 #define LIS3_USE_REGULATOR_CTRL 0x01
71 #define LIS3_USE_BLOCK_READ 0x02
72 u16 driver_features;
73 int default_rate;
74 int (*setup_resources)(void);
75 int (*release_resources)(void);
76 /* Limits for selftest are specified in chip data sheet */
77 s16 st_min_limits[3]; /* min pass limit x, y, z */
78 s16 st_max_limits[3]; /* max pass limit x, y, z */
79 int irq2;
80 };
81
82 #endif /* __LIS3LV02D_H_ */
This page took 0.058155 seconds and 5 git commands to generate.