include/linux/mtd/ubi.h

   1 /*
   2  * Copyright (c) International Business Machines Corp., 2006
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
  12  * the GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  17  *
  18  * Author: Artem Bityutskiy (Битюцкий Артём)
  19  */
  20
  21 #ifndef __LINUX_UBI_H__
  22 #define __LINUX_UBI_H__
  23
  24 #include <linux/ioctl.h>
  25 #include <linux/types.h>
  26 #include <mtd/ubi-user.h>
  27
  28 /* All voumes/LEBs */
  29 #define UBI_ALL -1
  30
  31 /*
  32  * enum ubi_open_mode - UBI volume open mode constants.
  33  *
  34  * UBI_READONLY: read-only mode
  35  * UBI_READWRITE: read-write mode
  36  * UBI_EXCLUSIVE: exclusive mode
  37  */
  38 enum {
  39         UBI_READONLY = 1,
  40         UBI_READWRITE,
  41         UBI_EXCLUSIVE
  42 };
  43
  44 /**
  45  * struct ubi_volume_info - UBI volume description data structure.
  46  * @vol_id: volume ID
  47  * @ubi_num: UBI device number this volume belongs to
  48  * @size: how many physical eraseblocks are reserved for this volume
  49  * @used_bytes: how many bytes of data this volume contains
  50  * @used_ebs: how many physical eraseblocks of this volume actually contain any
  51  *            data
  52  * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
  53  * @corrupted: non-zero if the volume is corrupted (static volumes only)
  54  * @upd_marker: non-zero if the volume has update marker set
  55  * @alignment: volume alignment
  56  * @usable_leb_size: how many bytes are available in logical eraseblocks of
  57  *                   this volume
  58  * @name_len: volume name length
  59  * @name: volume name
  60  * @cdev: UBI volume character device major and minor numbers
  61  *
  62  * The @corrupted flag is only relevant to static volumes and is always zero
  63  * for dynamic ones. This is because UBI does not care about dynamic volume
  64  * data protection and only cares about protecting static volume data.
  65  *
  66  * The @upd_marker flag is set if the volume update operation was interrupted.
  67  * Before touching the volume data during the update operation, UBI first sets
  68  * the update marker flag for this volume. If the volume update operation was
  69  * further interrupted, the update marker indicates this. If the update marker
  70  * is set, the contents of the volume is certainly damaged and a new volume
  71  * update operation has to be started.
  72  *
  73  * To put it differently, @corrupted and @upd_marker fields have different
  74  * semantics:
  75  *     o the @corrupted flag means that this static volume is corrupted for some
  76  *       reasons, but not because an interrupted volume update
  77  *     o the @upd_marker field means that the volume is damaged because of an
  78  *       interrupted update operation.
  79  *
  80  * I.e., the @corrupted flag is never set if the @upd_marker flag is set.
  81  *
  82  * The @used_bytes and @used_ebs fields are only really needed for static
  83  * volumes and contain the number of bytes stored in this static volume and how
  84  * many eraseblock this data occupies. In case of dynamic volumes, the
  85  * @used_bytes field is equivalent to @size*@usable_leb_size, and the @used_ebs
  86  * field is equivalent to @size.
  87  *
  88  * In general, logical eraseblock size is a property of the UBI device, not
  89  * of the UBI volume. Indeed, the logical eraseblock size depends on the
  90  * physical eraseblock size and on how much bytes UBI headers consume. But
  91  * because of the volume alignment (@alignment), the usable size of logical
  92  * eraseblocks if a volume may be less. The following equation is true:
  93  *      @usable_leb_size = LEB size - (LEB size mod @alignment),
  94  * where LEB size is the logical eraseblock size defined by the UBI device.
  95  *
  96  * The alignment is multiple to the minimal flash input/output unit size or %1
  97  * if all the available space is used.
  98  *
  99  * To put this differently, alignment may be considered is a way to change
 100  * volume logical eraseblock sizes.
 101  */
 102 struct ubi_volume_info {
 103         int ubi_num;
 104         int vol_id;
 105         int size;
 106         long long used_bytes;
 107         int used_ebs;
 108         int vol_type;
 109         int corrupted;
 110         int upd_marker;
 111         int alignment;
 112         int usable_leb_size;
 113         int name_len;
 114         const char *name;
 115         dev_t cdev;
 116 };
 117
 118 /**
 119  * struct ubi_device_info - UBI device description data structure.
 120  * @ubi_num: ubi device number
 121  * @leb_size: logical eraseblock size on this UBI device
 122  * @leb_start: starting offset of logical eraseblocks within physical
 123  *             eraseblocks
 124  * @min_io_size: minimal I/O unit size
 125  * @max_write_size: maximum amount of bytes the underlying flash can write at a
 126  *                  time (MTD write buffer size)
 127  * @ro_mode: if this device is in read-only mode
 128  * @cdev: UBI character device major and minor numbers
 129  *
 130  * Note, @leb_size is the logical eraseblock size offered by the UBI device.
 131  * Volumes of this UBI device may have smaller logical eraseblock size if their
 132  * alignment is not equivalent to %1.
 133  *
 134  * The @max_write_size field describes flash write maximum write unit. For
 135  * example, NOR flash allows for changing individual bytes, so @min_io_size is
 136  * %1. However, it does not mean than NOR flash has to write data byte-by-byte.
 137  * Instead, CFI NOR flashes have a write-buffer of, e.g., 64 bytes, and when
 138  * writing large chunks of data, they write 64-bytes at a time. Obviously, this
 139  * improves write throughput.
 140  *
 141  * Also, the MTD device may have N interleaved (striped) flash chips
 142  * underneath, in which case @min_io_size can be physical min. I/O size of
 143  * single flash chip, while @max_write_size can be N * @min_io_size.
 144  *
 145  * The @max_write_size field is always greater or equivalent to @min_io_size.
 146  * E.g., some NOR flashes may have (@min_io_size = 1, @max_write_size = 64). In
 147  * contrast, NAND flashes usually have @min_io_size = @max_write_size = NAND
 148  * page size.
 149  */
 150 struct ubi_device_info {
 151         int ubi_num;
 152         int leb_size;
 153         int leb_start;
 154         int min_io_size;
 155         int max_write_size;
 156         int ro_mode;
 157         dev_t cdev;
 158 };
 159
 160 /*
 161  * Volume notification types.
 162  * @UBI_VOLUME_ADDED: a volume has been added (an UBI device was attached or a
 163  *                    volume was created)
 164  * @UBI_VOLUME_REMOVED: a volume has been removed (an UBI device was detached
 165  *                      or a volume was removed)
 166  * @UBI_VOLUME_RESIZED: a volume has been re-sized
 167  * @UBI_VOLUME_RENAMED: a volume has been re-named
 168  * @UBI_VOLUME_UPDATED: data has been written to a volume
 169  *
 170  * These constants define which type of event has happened when a volume
 171  * notification function is invoked.
 172  */
 173 enum {
 174         UBI_VOLUME_ADDED,
 175         UBI_VOLUME_REMOVED,
 176         UBI_VOLUME_RESIZED,
 177         UBI_VOLUME_RENAMED,
 178         UBI_VOLUME_UPDATED,
 179 };
 180
 181 /*
 182  * struct ubi_notification - UBI notification description structure.
 183  * @di: UBI device description object
 184  * @vi: UBI volume description object
 185  *
 186  * UBI notifiers are called with a pointer to an object of this type. The
 187  * object describes the notification. Namely, it provides a description of the
 188  * UBI device and UBI volume the notification informs about.
 189  */
 190 struct ubi_notification {
 191         struct ubi_device_info di;
 192         struct ubi_volume_info vi;
 193 };
 194
 195 /* UBI descriptor given to users when they open UBI volumes */
 196 struct ubi_volume_desc;
 197
 198 int ubi_get_device_info(int ubi_num, struct ubi_device_info *di);
 199 void ubi_get_volume_info(struct ubi_volume_desc *desc,
 200                          struct ubi_volume_info *vi);
 201 struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode);
 202 struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
 203                                            int mode);
 204 struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode);
 205
 206 int ubi_register_volume_notifier(struct notifier_block *nb,
 207                                  int ignore_existing);
 208 int ubi_unregister_volume_notifier(struct notifier_block *nb);
 209
 210 void ubi_close_volume(struct ubi_volume_desc *desc);
 211 int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 212                  int len, int check);
 213 int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 214                   int offset, int len);
 215 int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 216                    int len);
 217 int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
 218 int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
 219 int ubi_leb_map(struct ubi_volume_desc *desc, int lnum);
 220 int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
 221 int ubi_sync(int ubi_num);
 222 int ubi_flush(int ubi_num, int vol_id, int lnum);
 223
 224 /*
 225  * This function is the same as the 'ubi_leb_read()' function, but it does not
 226  * provide the checking capability.
 227  */
 228 static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf,
 229                            int offset, int len)
 230 {
 231         return ubi_leb_read(desc, lnum, buf, offset, len, 0);
 232 }
 233 #endif /* !__LINUX_UBI_H__ */