2 * linux/drivers/char/serial_core.h
4 * Copyright (C) 2000 Deep Blue Solutions Ltd.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 #ifndef LINUX_SERIAL_CORE_H
21 #define LINUX_SERIAL_CORE_H
24 #include <linux/compiler.h>
25 #include <linux/interrupt.h>
26 #include <linux/circ_buf.h>
27 #include <linux/spinlock.h>
28 #include <linux/sched.h>
29 #include <linux/tty.h>
30 #include <linux/mutex.h>
31 #include <linux/sysrq.h>
32 #include <uapi/linux/serial_core.h>
34 #ifdef CONFIG_SERIAL_CORE_CONSOLE
35 #define uart_console(port) \
36 ((port)->cons && (port)->cons->index == (port)->line)
38 #define uart_console(port) (0)
46 * This structure describes all the operations that can be done on the
47 * physical hardware. See Documentation/serial/driver for details.
50 unsigned int (*tx_empty
)(struct uart_port
*);
51 void (*set_mctrl
)(struct uart_port
*, unsigned int mctrl
);
52 unsigned int (*get_mctrl
)(struct uart_port
*);
53 void (*stop_tx
)(struct uart_port
*);
54 void (*start_tx
)(struct uart_port
*);
55 void (*throttle
)(struct uart_port
*);
56 void (*unthrottle
)(struct uart_port
*);
57 void (*send_xchar
)(struct uart_port
*, char ch
);
58 void (*stop_rx
)(struct uart_port
*);
59 void (*enable_ms
)(struct uart_port
*);
60 void (*break_ctl
)(struct uart_port
*, int ctl
);
61 int (*startup
)(struct uart_port
*);
62 void (*shutdown
)(struct uart_port
*);
63 void (*flush_buffer
)(struct uart_port
*);
64 void (*set_termios
)(struct uart_port
*, struct ktermios
*new,
65 struct ktermios
*old
);
66 void (*set_ldisc
)(struct uart_port
*, struct ktermios
*);
67 void (*pm
)(struct uart_port
*, unsigned int state
,
68 unsigned int oldstate
);
71 * Return a string describing the type of the port
73 const char *(*type
)(struct uart_port
*);
76 * Release IO and memory resources used by the port.
77 * This includes iounmap if necessary.
79 void (*release_port
)(struct uart_port
*);
82 * Request IO and memory resources used by the port.
83 * This includes iomapping the port if necessary.
85 int (*request_port
)(struct uart_port
*);
86 void (*config_port
)(struct uart_port
*, int);
87 int (*verify_port
)(struct uart_port
*, struct serial_struct
*);
88 int (*ioctl
)(struct uart_port
*, unsigned int, unsigned long);
89 #ifdef CONFIG_CONSOLE_POLL
90 int (*poll_init
)(struct uart_port
*);
91 void (*poll_put_char
)(struct uart_port
*, unsigned char);
92 int (*poll_get_char
)(struct uart_port
*);
96 #define NO_POLL_CHAR 0x00ff0000
97 #define UART_CONFIG_TYPE (1 << 0)
98 #define UART_CONFIG_IRQ (1 << 1)
114 typedef unsigned int __bitwise__ upf_t
;
115 typedef unsigned int __bitwise__ upstat_t
;
118 spinlock_t lock
; /* port lock */
119 unsigned long iobase
; /* in/out[bwl] */
120 unsigned char __iomem
*membase
; /* read/write[bwl] */
121 unsigned int (*serial_in
)(struct uart_port
*, int);
122 void (*serial_out
)(struct uart_port
*, int, int);
123 void (*set_termios
)(struct uart_port
*,
124 struct ktermios
*new,
125 struct ktermios
*old
);
126 void (*set_mctrl
)(struct uart_port
*, unsigned int);
127 int (*startup
)(struct uart_port
*port
);
128 void (*shutdown
)(struct uart_port
*port
);
129 void (*throttle
)(struct uart_port
*port
);
130 void (*unthrottle
)(struct uart_port
*port
);
131 int (*handle_irq
)(struct uart_port
*);
132 void (*pm
)(struct uart_port
*, unsigned int state
,
134 void (*handle_break
)(struct uart_port
*);
135 int (*rs485_config
)(struct uart_port
*,
136 struct serial_rs485
*rs485
);
137 unsigned int irq
; /* irq number */
138 unsigned long irqflags
; /* irq flags */
139 unsigned int uartclk
; /* base uart clock */
140 unsigned int fifosize
; /* tx fifo size */
141 unsigned char x_char
; /* xon/xoff char */
142 unsigned char regshift
; /* reg offset shift */
143 unsigned char iotype
; /* io access style */
144 unsigned char unused1
;
146 #define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */
147 #define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */
148 #define UPIO_MEM (SERIAL_IO_MEM) /* 8b MMIO access */
149 #define UPIO_MEM32 (SERIAL_IO_MEM32) /* 32b little endian */
150 #define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */
151 #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */
152 #define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */
154 unsigned int read_status_mask
; /* driver specific */
155 unsigned int ignore_status_mask
; /* driver specific */
156 struct uart_state
*state
; /* pointer to parent state */
157 struct uart_icount icount
; /* statistics */
159 struct console
*cons
; /* struct console, if any */
160 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
161 unsigned long sysrq
; /* sysrq timeout */
164 /* flags must be updated while holding port mutex */
168 * These flags must be equivalent to the flags defined in
169 * include/uapi/linux/tty_flags.h which are the userspace definitions
170 * assigned from the serial_struct flags in uart_set_info()
171 * [for bit definitions in the UPF_CHANGE_MASK]
173 * Bits [0..UPF_LAST_USER] are userspace defined/visible/changeable
174 * except bit 15 (UPF_NO_TXEN_TEST) which is masked off.
175 * The remaining bits are serial-core specific and not modifiable by
178 #define UPF_FOURPORT ((__force upf_t) ASYNC_FOURPORT /* 1 */ )
179 #define UPF_SAK ((__force upf_t) ASYNC_SAK /* 2 */ )
180 #define UPF_SPD_HI ((__force upf_t) ASYNC_SPD_HI /* 4 */ )
181 #define UPF_SPD_VHI ((__force upf_t) ASYNC_SPD_VHI /* 5 */ )
182 #define UPF_SPD_CUST ((__force upf_t) ASYNC_SPD_CUST /* 0x0030 */ )
183 #define UPF_SPD_WARP ((__force upf_t) ASYNC_SPD_WARP /* 0x1010 */ )
184 #define UPF_SPD_MASK ((__force upf_t) ASYNC_SPD_MASK /* 0x1030 */ )
185 #define UPF_SKIP_TEST ((__force upf_t) ASYNC_SKIP_TEST /* 6 */ )
186 #define UPF_AUTO_IRQ ((__force upf_t) ASYNC_AUTO_IRQ /* 7 */ )
187 #define UPF_HARDPPS_CD ((__force upf_t) ASYNC_HARDPPS_CD /* 11 */ )
188 #define UPF_SPD_SHI ((__force upf_t) ASYNC_SPD_SHI /* 12 */ )
189 #define UPF_LOW_LATENCY ((__force upf_t) ASYNC_LOW_LATENCY /* 13 */ )
190 #define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ )
191 #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
192 #define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
194 /* Port has hardware-assisted h/w flow control */
195 #define UPF_AUTO_CTS ((__force upf_t) (1 << 20))
196 #define UPF_AUTO_RTS ((__force upf_t) (1 << 21))
197 #define UPF_HARD_FLOW ((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS))
198 /* Port has hardware-assisted s/w flow control */
199 #define UPF_SOFT_FLOW ((__force upf_t) (1 << 22))
200 #define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
201 #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
202 #define UPF_EXAR_EFR ((__force upf_t) (1 << 25))
203 #define UPF_BUG_THRE ((__force upf_t) (1 << 26))
204 /* The exact UART type is known and should not be probed. */
205 #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
206 #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
207 #define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
208 #define UPF_DEAD ((__force upf_t) (1 << 30))
209 #define UPF_IOREMAP ((__force upf_t) (1 << 31))
211 #define __UPF_CHANGE_MASK 0x17fff
212 #define UPF_CHANGE_MASK ((__force upf_t) __UPF_CHANGE_MASK)
213 #define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
215 #if __UPF_CHANGE_MASK > ASYNC_FLAGS
216 #error Change mask not equivalent to userspace-visible bit defines
220 * Must hold termios_rwsem, port mutex and port lock to change;
221 * can hold any one lock to read.
225 #define UPSTAT_CTS_ENABLE ((__force upstat_t) (1 << 0))
226 #define UPSTAT_DCD_ENABLE ((__force upstat_t) (1 << 1))
227 #define UPSTAT_AUTORTS ((__force upstat_t) (1 << 2))
228 #define UPSTAT_AUTOCTS ((__force upstat_t) (1 << 3))
229 #define UPSTAT_AUTOXOFF ((__force upstat_t) (1 << 4))
231 int hw_stopped
; /* sw-assisted CTS flow state */
232 unsigned int mctrl
; /* current modem ctrl settings */
233 unsigned int timeout
; /* character-based timeout */
234 unsigned int type
; /* port type */
235 const struct uart_ops
*ops
;
236 unsigned int custom_divisor
;
237 unsigned int line
; /* port index */
238 resource_size_t mapbase
; /* for ioremap */
239 struct device
*dev
; /* parent device */
240 unsigned char hub6
; /* this should be in the 8250 driver */
241 unsigned char suspended
;
242 unsigned char irq_wake
;
243 unsigned char unused
[2];
244 struct attribute_group
*attr_group
; /* port specific attributes */
245 const struct attribute_group
**tty_groups
; /* all attributes (serial core use only) */
246 struct serial_rs485 rs485
;
247 void *private_data
; /* generic platform data pointer */
250 static inline int serial_port_in(struct uart_port
*up
, int offset
)
252 return up
->serial_in(up
, offset
);
255 static inline void serial_port_out(struct uart_port
*up
, int offset
, int value
)
257 up
->serial_out(up
, offset
, value
);
261 * enum uart_pm_state - power states for UARTs
262 * @UART_PM_STATE_ON: UART is powered, up and operational
263 * @UART_PM_STATE_OFF: UART is powered off
264 * @UART_PM_STATE_UNDEFINED: sentinel
267 UART_PM_STATE_ON
= 0,
268 UART_PM_STATE_OFF
= 3, /* number taken from ACPI */
269 UART_PM_STATE_UNDEFINED
,
273 * This is the state information which is persistent across opens.
276 struct tty_port port
;
278 enum uart_pm_state pm_state
;
279 struct circ_buf xmit
;
281 struct uart_port
*uart_port
;
284 #define UART_XMIT_SIZE PAGE_SIZE
287 /* number of characters left in xmit buffer before we ask for more */
288 #define WAKEUP_CHARS 256
294 struct module
*owner
;
295 const char *driver_name
;
296 const char *dev_name
;
300 struct console
*cons
;
303 * these are private; the low level driver should not
304 * touch these; they should be initialised to NULL
306 struct uart_state
*state
;
307 struct tty_driver
*tty_driver
;
310 void uart_write_wakeup(struct uart_port
*port
);
315 void uart_update_timeout(struct uart_port
*port
, unsigned int cflag
,
317 unsigned int uart_get_baud_rate(struct uart_port
*port
, struct ktermios
*termios
,
318 struct ktermios
*old
, unsigned int min
,
320 unsigned int uart_get_divisor(struct uart_port
*port
, unsigned int baud
);
322 /* Base timer interval for polling */
323 static inline int uart_poll_timeout(struct uart_port
*port
)
325 int timeout
= port
->timeout
;
327 return timeout
> 6 ? (timeout
/ 2 - 2) : 1;
333 struct earlycon_device
{
335 struct uart_port port
;
336 char options
[16]; /* e.g., 115200n8 */
339 int setup_earlycon(char *buf
, const char *match
,
340 int (*setup
)(struct earlycon_device
*, const char *));
342 extern int of_setup_earlycon(unsigned long addr
,
343 int (*setup
)(struct earlycon_device
*, const char *));
345 #define EARLYCON_DECLARE(name, func) \
346 static int __init name ## _setup_earlycon(char *buf) \
348 return setup_earlycon(buf, __stringify(name), func); \
350 early_param("earlycon", name ## _setup_earlycon);
352 #define OF_EARLYCON_DECLARE(name, compat, fn) \
353 _OF_DECLARE(earlycon, name, compat, fn, void *)
355 struct uart_port
*uart_get_console(struct uart_port
*ports
, int nr
,
357 void uart_parse_options(char *options
, int *baud
, int *parity
, int *bits
,
359 int uart_set_options(struct uart_port
*port
, struct console
*co
, int baud
,
360 int parity
, int bits
, int flow
);
361 struct tty_driver
*uart_console_device(struct console
*co
, int *index
);
362 void uart_console_write(struct uart_port
*port
, const char *s
,
364 void (*putchar
)(struct uart_port
*, int));
367 * Port/driver registration/removal
369 int uart_register_driver(struct uart_driver
*uart
);
370 void uart_unregister_driver(struct uart_driver
*uart
);
371 int uart_add_one_port(struct uart_driver
*reg
, struct uart_port
*port
);
372 int uart_remove_one_port(struct uart_driver
*reg
, struct uart_port
*port
);
373 int uart_match_port(struct uart_port
*port1
, struct uart_port
*port2
);
378 int uart_suspend_port(struct uart_driver
*reg
, struct uart_port
*port
);
379 int uart_resume_port(struct uart_driver
*reg
, struct uart_port
*port
);
381 #define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
382 #define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
384 #define uart_circ_chars_pending(circ) \
385 (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
387 #define uart_circ_chars_free(circ) \
388 (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
390 static inline int uart_tx_stopped(struct uart_port
*port
)
392 struct tty_struct
*tty
= port
->state
->port
.tty
;
393 if (tty
->stopped
|| port
->hw_stopped
)
398 static inline bool uart_cts_enabled(struct uart_port
*uport
)
400 return !!(uport
->status
& UPSTAT_CTS_ENABLE
);
403 static inline bool uart_softcts_mode(struct uart_port
*uport
)
405 upstat_t mask
= UPSTAT_CTS_ENABLE
| UPSTAT_AUTOCTS
;
407 return ((uport
->status
& mask
) == UPSTAT_CTS_ENABLE
);
411 * The following are helper functions for the low level drivers.
414 extern void uart_handle_dcd_change(struct uart_port
*uport
,
415 unsigned int status
);
416 extern void uart_handle_cts_change(struct uart_port
*uport
,
417 unsigned int status
);
419 extern void uart_insert_char(struct uart_port
*port
, unsigned int status
,
420 unsigned int overrun
, unsigned int ch
, unsigned int flag
);
424 uart_handle_sysrq_char(struct uart_port
*port
, unsigned int ch
)
427 if (ch
&& time_before(jiffies
, port
->sysrq
)) {
437 #define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
441 * We do the SysRQ and SAK checking like this...
443 static inline int uart_handle_break(struct uart_port
*port
)
445 struct uart_state
*state
= port
->state
;
447 if (port
->handle_break
)
448 port
->handle_break(port
);
451 if (port
->cons
&& port
->cons
->index
== port
->line
) {
453 port
->sysrq
= jiffies
+ HZ
*5;
459 if (port
->flags
& UPF_SAK
)
460 do_SAK(state
->port
.tty
);
465 * UART_ENABLE_MS - determine if port should enable modem status irqs
467 #define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \
468 (cflag) & CRTSCTS || \
471 #endif /* LINUX_SERIAL_CORE_H */
This page took 0.04303 seconds and 5 git commands to generate.