ext3: Flush disk caches on fsync when needed
[deliverable/linux.git] / include / linux / topology.h
1 /*
2 * include/linux/topology.h
3 *
4 * Written by: Matthew Dobson, IBM Corporation
5 *
6 * Copyright (C) 2002, IBM Corp.
7 *
8 * All rights reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
18 * NON INFRINGEMENT. See the GNU General Public License for more
19 * details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 *
25 * Send feedback to <colpatch@us.ibm.com>
26 */
27 #ifndef _LINUX_TOPOLOGY_H
28 #define _LINUX_TOPOLOGY_H
29
30 #include <linux/cpumask.h>
31 #include <linux/bitops.h>
32 #include <linux/mmzone.h>
33 #include <linux/smp.h>
34 #include <asm/topology.h>
35
36 #ifndef node_has_online_mem
37 #define node_has_online_mem(nid) (1)
38 #endif
39
40 #ifndef nr_cpus_node
41 #define nr_cpus_node(node) cpumask_weight(cpumask_of_node(node))
42 #endif
43
44 #define for_each_node_with_cpus(node) \
45 for_each_online_node(node) \
46 if (nr_cpus_node(node))
47
48 int arch_update_cpu_topology(void);
49
50 /* Conform to ACPI 2.0 SLIT distance definitions */
51 #define LOCAL_DISTANCE 10
52 #define REMOTE_DISTANCE 20
53 #ifndef node_distance
54 #define node_distance(from,to) ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
55 #endif
56 #ifndef RECLAIM_DISTANCE
57 /*
58 * If the distance between nodes in a system is larger than RECLAIM_DISTANCE
59 * (in whatever arch specific measurement units returned by node_distance())
60 * then switch on zone reclaim on boot.
61 */
62 #define RECLAIM_DISTANCE 20
63 #endif
64 #ifndef PENALTY_FOR_NODE_WITH_CPUS
65 #define PENALTY_FOR_NODE_WITH_CPUS (1)
66 #endif
67
68 /*
69 * Below are the 3 major initializers used in building sched_domains:
70 * SD_SIBLING_INIT, for SMT domains
71 * SD_CPU_INIT, for SMP domains
72 * SD_NODE_INIT, for NUMA domains
73 *
74 * Any architecture that cares to do any tuning to these values should do so
75 * by defining their own arch-specific initializer in include/asm/topology.h.
76 * A definition there will automagically override these default initializers
77 * and allow arch-specific performance tuning of sched_domains.
78 * (Only non-zero and non-null fields need be specified.)
79 */
80
81 #ifdef CONFIG_SCHED_SMT
82 /* MCD - Do we really need this? It is always on if CONFIG_SCHED_SMT is,
83 * so can't we drop this in favor of CONFIG_SCHED_SMT?
84 */
85 #define ARCH_HAS_SCHED_WAKE_IDLE
86 /* Common values for SMT siblings */
87 #ifndef SD_SIBLING_INIT
88 #define SD_SIBLING_INIT (struct sched_domain) { \
89 .min_interval = 1, \
90 .max_interval = 2, \
91 .busy_factor = 64, \
92 .imbalance_pct = 110, \
93 \
94 .flags = 1*SD_LOAD_BALANCE \
95 | 1*SD_BALANCE_NEWIDLE \
96 | 1*SD_BALANCE_EXEC \
97 | 1*SD_BALANCE_FORK \
98 | 0*SD_WAKE_IDLE \
99 | 1*SD_WAKE_AFFINE \
100 | 1*SD_WAKE_BALANCE \
101 | 1*SD_SHARE_CPUPOWER \
102 | 0*SD_POWERSAVINGS_BALANCE \
103 | 0*SD_SHARE_PKG_RESOURCES \
104 | 0*SD_SERIALIZE \
105 | 0*SD_WAKE_IDLE_FAR \
106 | 0*SD_PREFER_SIBLING \
107 , \
108 .last_balance = jiffies, \
109 .balance_interval = 1, \
110 .smt_gain = 1178, /* 15% */ \
111 }
112 #endif
113 #endif /* CONFIG_SCHED_SMT */
114
115 #ifdef CONFIG_SCHED_MC
116 /* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
117 #ifndef SD_MC_INIT
118 #define SD_MC_INIT (struct sched_domain) { \
119 .min_interval = 1, \
120 .max_interval = 4, \
121 .busy_factor = 64, \
122 .imbalance_pct = 125, \
123 .cache_nice_tries = 1, \
124 .busy_idx = 2, \
125 .wake_idx = 1, \
126 .forkexec_idx = 1, \
127 \
128 .flags = 1*SD_LOAD_BALANCE \
129 | 1*SD_BALANCE_NEWIDLE \
130 | 1*SD_BALANCE_EXEC \
131 | 1*SD_BALANCE_FORK \
132 | 1*SD_WAKE_IDLE \
133 | 1*SD_WAKE_AFFINE \
134 | 1*SD_WAKE_BALANCE \
135 | 0*SD_SHARE_CPUPOWER \
136 | 1*SD_SHARE_PKG_RESOURCES \
137 | 0*SD_SERIALIZE \
138 | 0*SD_WAKE_IDLE_FAR \
139 | sd_balance_for_mc_power() \
140 | sd_power_saving_flags() \
141 , \
142 .last_balance = jiffies, \
143 .balance_interval = 1, \
144 }
145 #endif
146 #endif /* CONFIG_SCHED_MC */
147
148 /* Common values for CPUs */
149 #ifndef SD_CPU_INIT
150 #define SD_CPU_INIT (struct sched_domain) { \
151 .min_interval = 1, \
152 .max_interval = 4, \
153 .busy_factor = 64, \
154 .imbalance_pct = 125, \
155 .cache_nice_tries = 1, \
156 .busy_idx = 2, \
157 .idle_idx = 1, \
158 .newidle_idx = 2, \
159 .wake_idx = 1, \
160 .forkexec_idx = 1, \
161 \
162 .flags = 1*SD_LOAD_BALANCE \
163 | 1*SD_BALANCE_NEWIDLE \
164 | 1*SD_BALANCE_EXEC \
165 | 1*SD_BALANCE_FORK \
166 | 1*SD_WAKE_IDLE \
167 | 0*SD_WAKE_AFFINE \
168 | 1*SD_WAKE_BALANCE \
169 | 0*SD_SHARE_CPUPOWER \
170 | 0*SD_SHARE_PKG_RESOURCES \
171 | 0*SD_SERIALIZE \
172 | 0*SD_WAKE_IDLE_FAR \
173 | sd_balance_for_package_power() \
174 | sd_power_saving_flags() \
175 , \
176 .last_balance = jiffies, \
177 .balance_interval = 1, \
178 }
179 #endif
180
181 /* sched_domains SD_ALLNODES_INIT for NUMA machines */
182 #define SD_ALLNODES_INIT (struct sched_domain) { \
183 .min_interval = 64, \
184 .max_interval = 64*num_online_cpus(), \
185 .busy_factor = 128, \
186 .imbalance_pct = 133, \
187 .cache_nice_tries = 1, \
188 .busy_idx = 3, \
189 .idle_idx = 3, \
190 .flags = 1*SD_LOAD_BALANCE \
191 | 1*SD_BALANCE_NEWIDLE \
192 | 0*SD_BALANCE_EXEC \
193 | 0*SD_BALANCE_FORK \
194 | 0*SD_WAKE_IDLE \
195 | 1*SD_WAKE_AFFINE \
196 | 0*SD_WAKE_BALANCE \
197 | 0*SD_SHARE_CPUPOWER \
198 | 0*SD_POWERSAVINGS_BALANCE \
199 | 0*SD_SHARE_PKG_RESOURCES \
200 | 1*SD_SERIALIZE \
201 | 1*SD_WAKE_IDLE_FAR \
202 | 0*SD_PREFER_SIBLING \
203 , \
204 .last_balance = jiffies, \
205 .balance_interval = 64, \
206 }
207
208 #ifdef CONFIG_NUMA
209 #ifndef SD_NODE_INIT
210 #error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
211 #endif
212 #endif /* CONFIG_NUMA */
213
214 #ifndef topology_physical_package_id
215 #define topology_physical_package_id(cpu) ((void)(cpu), -1)
216 #endif
217 #ifndef topology_core_id
218 #define topology_core_id(cpu) ((void)(cpu), 0)
219 #endif
220 #ifndef topology_thread_siblings
221 #define topology_thread_siblings(cpu) cpumask_of_cpu(cpu)
222 #endif
223 #ifndef topology_core_siblings
224 #define topology_core_siblings(cpu) cpumask_of_cpu(cpu)
225 #endif
226 #ifndef topology_thread_cpumask
227 #define topology_thread_cpumask(cpu) cpumask_of(cpu)
228 #endif
229 #ifndef topology_core_cpumask
230 #define topology_core_cpumask(cpu) cpumask_of(cpu)
231 #endif
232
233 /* Returns the number of the current Node. */
234 #ifndef numa_node_id
235 #define numa_node_id() (cpu_to_node(raw_smp_processor_id()))
236 #endif
237
238 #endif /* _LINUX_TOPOLOGY_H */
This page took 0.070023 seconds and 5 git commands to generate.