sched: Add smt_gain
[deliverable/linux.git] / include / linux / topology.h
1 /*
2 * include/linux/topology.h
3 *
4 * Written by: Matthew Dobson, IBM Corporation
5 *
6 * Copyright (C) 2002, IBM Corp.
7 *
8 * All rights reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
18 * NON INFRINGEMENT. See the GNU General Public License for more
19 * details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 *
25 * Send feedback to <colpatch@us.ibm.com>
26 */
27 #ifndef _LINUX_TOPOLOGY_H
28 #define _LINUX_TOPOLOGY_H
29
30 #include <linux/cpumask.h>
31 #include <linux/bitops.h>
32 #include <linux/mmzone.h>
33 #include <linux/smp.h>
34 #include <asm/topology.h>
35
36 #ifndef node_has_online_mem
37 #define node_has_online_mem(nid) (1)
38 #endif
39
40 #ifndef nr_cpus_node
41 #define nr_cpus_node(node) cpumask_weight(cpumask_of_node(node))
42 #endif
43
44 #define for_each_node_with_cpus(node) \
45 for_each_online_node(node) \
46 if (nr_cpus_node(node))
47
48 int arch_update_cpu_topology(void);
49
50 /* Conform to ACPI 2.0 SLIT distance definitions */
51 #define LOCAL_DISTANCE 10
52 #define REMOTE_DISTANCE 20
53 #ifndef node_distance
54 #define node_distance(from,to) ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
55 #endif
56 #ifndef RECLAIM_DISTANCE
57 /*
58 * If the distance between nodes in a system is larger than RECLAIM_DISTANCE
59 * (in whatever arch specific measurement units returned by node_distance())
60 * then switch on zone reclaim on boot.
61 */
62 #define RECLAIM_DISTANCE 20
63 #endif
64 #ifndef PENALTY_FOR_NODE_WITH_CPUS
65 #define PENALTY_FOR_NODE_WITH_CPUS (1)
66 #endif
67
68 /*
69 * Below are the 3 major initializers used in building sched_domains:
70 * SD_SIBLING_INIT, for SMT domains
71 * SD_CPU_INIT, for SMP domains
72 * SD_NODE_INIT, for NUMA domains
73 *
74 * Any architecture that cares to do any tuning to these values should do so
75 * by defining their own arch-specific initializer in include/asm/topology.h.
76 * A definition there will automagically override these default initializers
77 * and allow arch-specific performance tuning of sched_domains.
78 * (Only non-zero and non-null fields need be specified.)
79 */
80
81 #ifdef CONFIG_SCHED_SMT
82 /* MCD - Do we really need this? It is always on if CONFIG_SCHED_SMT is,
83 * so can't we drop this in favor of CONFIG_SCHED_SMT?
84 */
85 #define ARCH_HAS_SCHED_WAKE_IDLE
86 /* Common values for SMT siblings */
87 #ifndef SD_SIBLING_INIT
88 #define SD_SIBLING_INIT (struct sched_domain) { \
89 .min_interval = 1, \
90 .max_interval = 2, \
91 .busy_factor = 64, \
92 .imbalance_pct = 110, \
93 .flags = SD_LOAD_BALANCE \
94 | SD_BALANCE_NEWIDLE \
95 | SD_BALANCE_FORK \
96 | SD_BALANCE_EXEC \
97 | SD_WAKE_AFFINE \
98 | SD_WAKE_BALANCE \
99 | SD_SHARE_CPUPOWER, \
100 .last_balance = jiffies, \
101 .balance_interval = 1, \
102 .smt_gain = 1178, /* 15% */ \
103 }
104 #endif
105 #endif /* CONFIG_SCHED_SMT */
106
107 #ifdef CONFIG_SCHED_MC
108 /* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
109 #ifndef SD_MC_INIT
110 #define SD_MC_INIT (struct sched_domain) { \
111 .min_interval = 1, \
112 .max_interval = 4, \
113 .busy_factor = 64, \
114 .imbalance_pct = 125, \
115 .cache_nice_tries = 1, \
116 .busy_idx = 2, \
117 .wake_idx = 1, \
118 .forkexec_idx = 1, \
119 .flags = SD_LOAD_BALANCE \
120 | SD_BALANCE_FORK \
121 | SD_BALANCE_EXEC \
122 | SD_WAKE_AFFINE \
123 | SD_WAKE_BALANCE \
124 | SD_SHARE_PKG_RESOURCES\
125 | sd_balance_for_mc_power()\
126 | sd_power_saving_flags(),\
127 .last_balance = jiffies, \
128 .balance_interval = 1, \
129 }
130 #endif
131 #endif /* CONFIG_SCHED_MC */
132
133 /* Common values for CPUs */
134 #ifndef SD_CPU_INIT
135 #define SD_CPU_INIT (struct sched_domain) { \
136 .min_interval = 1, \
137 .max_interval = 4, \
138 .busy_factor = 64, \
139 .imbalance_pct = 125, \
140 .cache_nice_tries = 1, \
141 .busy_idx = 2, \
142 .idle_idx = 1, \
143 .newidle_idx = 2, \
144 .wake_idx = 1, \
145 .forkexec_idx = 1, \
146 .flags = SD_LOAD_BALANCE \
147 | SD_BALANCE_EXEC \
148 | SD_BALANCE_FORK \
149 | SD_WAKE_AFFINE \
150 | SD_WAKE_BALANCE \
151 | sd_balance_for_package_power()\
152 | sd_power_saving_flags(),\
153 .last_balance = jiffies, \
154 .balance_interval = 1, \
155 }
156 #endif
157
158 /* sched_domains SD_ALLNODES_INIT for NUMA machines */
159 #define SD_ALLNODES_INIT (struct sched_domain) { \
160 .min_interval = 64, \
161 .max_interval = 64*num_online_cpus(), \
162 .busy_factor = 128, \
163 .imbalance_pct = 133, \
164 .cache_nice_tries = 1, \
165 .busy_idx = 3, \
166 .idle_idx = 3, \
167 .flags = SD_LOAD_BALANCE \
168 | SD_BALANCE_NEWIDLE \
169 | SD_WAKE_AFFINE \
170 | SD_SERIALIZE, \
171 .last_balance = jiffies, \
172 .balance_interval = 64, \
173 }
174
175 #ifdef CONFIG_NUMA
176 #ifndef SD_NODE_INIT
177 #error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
178 #endif
179 #endif /* CONFIG_NUMA */
180
181 #ifndef topology_physical_package_id
182 #define topology_physical_package_id(cpu) ((void)(cpu), -1)
183 #endif
184 #ifndef topology_core_id
185 #define topology_core_id(cpu) ((void)(cpu), 0)
186 #endif
187 #ifndef topology_thread_siblings
188 #define topology_thread_siblings(cpu) cpumask_of_cpu(cpu)
189 #endif
190 #ifndef topology_core_siblings
191 #define topology_core_siblings(cpu) cpumask_of_cpu(cpu)
192 #endif
193 #ifndef topology_thread_cpumask
194 #define topology_thread_cpumask(cpu) cpumask_of(cpu)
195 #endif
196 #ifndef topology_core_cpumask
197 #define topology_core_cpumask(cpu) cpumask_of(cpu)
198 #endif
199
200 /* Returns the number of the current Node. */
201 #ifndef numa_node_id
202 #define numa_node_id() (cpu_to_node(raw_smp_processor_id()))
203 #endif
204
205 #endif /* _LINUX_TOPOLOGY_H */
This page took 0.036564 seconds and 6 git commands to generate.