include/media/v4l2-subdev.h

   1 /*
   2     V4L2 sub-device support header.
   3
   4     Copyright (C) 2008  Hans Verkuil <hverkuil@xs4all.nl>
   5
   6     This program is free software; you can redistribute it and/or modify
   7     it under the terms of the GNU General Public License as published by
   8     the Free Software Foundation; either version 2 of the License, or
   9     (at your option) any later version.
  10
  11     This program is distributed in the hope that it will be useful,
  12     but WITHOUT ANY WARRANTY; without even the implied warranty of
  13     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14     GNU General Public License for more details.
  15
  16     You should have received a copy of the GNU General Public License
  17     along with this program; if not, write to the Free Software
  18     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  */
  20
  21 #ifndef _V4L2_SUBDEV_H
  22 #define _V4L2_SUBDEV_H
  23
  24 #include <linux/types.h>
  25 #include <linux/v4l2-subdev.h>
  26 #include <media/media-entity.h>
  27 #include <media/v4l2-async.h>
  28 #include <media/v4l2-common.h>
  29 #include <media/v4l2-dev.h>
  30 #include <media/v4l2-fh.h>
  31 #include <media/v4l2-mediabus.h>
  32
  33 /* generic v4l2_device notify callback notification values */
  34 #define V4L2_SUBDEV_IR_RX_NOTIFY                _IOW('v', 0, u32)
  35 #define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ      0x00000001
  36 #define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED    0x00000002
  37 #define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN       0x00000004
  38 #define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN       0x00000008
  39
  40 #define V4L2_SUBDEV_IR_TX_NOTIFY                _IOW('v', 1, u32)
  41 #define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ      0x00000001
  42
  43 struct v4l2_device;
  44 struct v4l2_ctrl_handler;
  45 struct v4l2_event_subscription;
  46 struct v4l2_fh;
  47 struct v4l2_subdev;
  48 struct v4l2_subdev_fh;
  49 struct tuner_setup;
  50 struct v4l2_mbus_frame_desc;
  51
  52 /* decode_vbi_line */
  53 struct v4l2_decode_vbi_line {
  54         u32 is_second_field;    /* Set to 0 for the first (odd) field,
  55                                    set to 1 for the second (even) field. */
  56         u8 *p;                  /* Pointer to the sliced VBI data from the decoder.
  57                                    On exit points to the start of the payload. */
  58         u32 line;               /* Line number of the sliced VBI data (1-23) */
  59         u32 type;               /* VBI service type (V4L2_SLICED_*). 0 if no service found */
  60 };
  61
  62 /* Sub-devices are devices that are connected somehow to the main bridge
  63    device. These devices are usually audio/video muxers/encoders/decoders or
  64    sensors and webcam controllers.
  65
  66    Usually these devices are controlled through an i2c bus, but other busses
  67    may also be used.
  68
  69    The v4l2_subdev struct provides a way of accessing these devices in a
  70    generic manner. Most operations that these sub-devices support fall in
  71    a few categories: core ops, audio ops, video ops and tuner ops.
  72
  73    More categories can be added if needed, although this should remain a
  74    limited set (no more than approx. 8 categories).
  75
  76    Each category has its own set of ops that subdev drivers can implement.
  77
  78    A subdev driver can leave the pointer to the category ops NULL if
  79    it does not implement them (e.g. an audio subdev will generally not
  80    implement the video category ops). The exception is the core category:
  81    this must always be present.
  82
  83    These ops are all used internally so it is no problem to change, remove
  84    or add ops or move ops from one to another category. Currently these
  85    ops are based on the original ioctls, but since ops are not limited to
  86    one argument there is room for improvement here once all i2c subdev
  87    drivers are converted to use these ops.
  88  */
  89
  90 /* Core ops: it is highly recommended to implement at least these ops:
  91
  92    log_status
  93    g_register
  94    s_register
  95
  96    This provides basic debugging support.
  97
  98    The ioctl ops is meant for generic ioctl-like commands. Depending on
  99    the use-case it might be better to use subdev-specific ops (currently
 100    not yet implemented) since ops provide proper type-checking.
 101  */
 102
 103 /* Subdevice external IO pin configuration */
 104 #define V4L2_SUBDEV_IO_PIN_DISABLE      (1 << 0) /* ENABLE assumed */
 105 #define V4L2_SUBDEV_IO_PIN_OUTPUT       (1 << 1)
 106 #define V4L2_SUBDEV_IO_PIN_INPUT        (1 << 2)
 107 #define V4L2_SUBDEV_IO_PIN_SET_VALUE    (1 << 3) /* Set output value */
 108 #define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW   (1 << 4) /* ACTIVE HIGH assumed */
 109
 110 struct v4l2_subdev_io_pin_config {
 111         u32 flags;      /* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */
 112         u8 pin;         /* Chip external IO pin to configure */
 113         u8 function;    /* Internal signal pad/function to route to IO pin */
 114         u8 value;       /* Initial value for pin - e.g. GPIO output value */
 115         u8 strength;    /* Pin drive strength */
 116 };
 117
 118 /*
 119    s_io_pin_config: configure one or more chip I/O pins for chips that
 120         multiplex different internal signal pads out to IO pins.  This function
 121         takes a pointer to an array of 'n' pin configuration entries, one for
 122         each pin being configured.  This function could be called at times
 123         other than just subdevice initialization.
 124
 125    init: initialize the sensor registers to some sort of reasonable default
 126         values. Do not use for new drivers and should be removed in existing
 127         drivers.
 128
 129    load_fw: load firmware.
 130
 131    reset: generic reset command. The argument selects which subsystems to
 132         reset. Passing 0 will always reset the whole chip. Do not use for new
 133         drivers without discussing this first on the linux-media mailinglist.
 134         There should be no reason normally to reset a device.
 135
 136    s_gpio: set GPIO pins. Very simple right now, might need to be extended with
 137         a direction argument if needed.
 138
 139    s_power: puts subdevice in power saving mode (on == 0) or normal operation
 140         mode (on == 1).
 141
 142    interrupt_service_routine: Called by the bridge chip's interrupt service
 143         handler, when an interrupt status has be raised due to this subdev,
 144         so that this subdev can handle the details.  It may schedule work to be
 145         performed later.  It must not sleep.  *Called from an IRQ context*.
 146  */
 147 struct v4l2_subdev_core_ops {
 148         int (*log_status)(struct v4l2_subdev *sd);
 149         int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n,
 150                                       struct v4l2_subdev_io_pin_config *pincfg);
 151         int (*init)(struct v4l2_subdev *sd, u32 val);
 152         int (*load_fw)(struct v4l2_subdev *sd);
 153         int (*reset)(struct v4l2_subdev *sd, u32 val);
 154         int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
 155         int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
 156         int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
 157         int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
 158         int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
 159         int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
 160         int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
 161         int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
 162         int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
 163         int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
 164         long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
 165 #ifdef CONFIG_COMPAT
 166         long (*compat_ioctl32)(struct v4l2_subdev *sd, unsigned int cmd,
 167                                unsigned long arg);
 168 #endif
 169 #ifdef CONFIG_VIDEO_ADV_DEBUG
 170         int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
 171         int (*s_register)(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg);
 172 #endif
 173         int (*s_power)(struct v4l2_subdev *sd, int on);
 174         int (*interrupt_service_routine)(struct v4l2_subdev *sd,
 175                                                 u32 status, bool *handled);
 176         int (*subscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh,
 177                                struct v4l2_event_subscription *sub);
 178         int (*unsubscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh,
 179                                  struct v4l2_event_subscription *sub);
 180 };
 181
 182 /* s_radio: v4l device was opened in radio mode.
 183
 184    g_frequency: freq->type must be filled in. Normally done by video_ioctl2
 185         or the bridge driver.
 186
 187    g_tuner:
 188    s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the
 189         bridge driver.
 190
 191    s_type_addr: sets tuner type and its I2C addr.
 192
 193    s_config: sets tda9887 specific stuff, like port1, port2 and qss
 194  */
 195 struct v4l2_subdev_tuner_ops {
 196         int (*s_radio)(struct v4l2_subdev *sd);
 197         int (*s_frequency)(struct v4l2_subdev *sd, const struct v4l2_frequency *freq);
 198         int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
 199         int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
 200         int (*s_tuner)(struct v4l2_subdev *sd, const struct v4l2_tuner *vt);
 201         int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
 202         int (*s_modulator)(struct v4l2_subdev *sd, const struct v4l2_modulator *vm);
 203         int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
 204         int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
 205 };
 206
 207 /* s_clock_freq: set the frequency (in Hz) of the audio clock output.
 208         Used to slave an audio processor to the video decoder, ensuring that
 209         audio and video remain synchronized. Usual values for the frequency
 210         are 48000, 44100 or 32000 Hz. If the frequency is not supported, then
 211         -EINVAL is returned.
 212
 213    s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard
 214         way to select I2S clock used by driving digital audio streams at some
 215         board designs. Usual values for the frequency are 1024000 and 2048000.
 216         If the frequency is not supported, then -EINVAL is returned.
 217
 218    s_routing: used to define the input and/or output pins of an audio chip,
 219         and any additional configuration data.
 220         Never attempt to use user-level input IDs (e.g. Composite, S-Video,
 221         Tuner) at this level. An i2c device shouldn't know about whether an
 222         input pin is connected to a Composite connector, become on another
 223         board or platform it might be connected to something else entirely.
 224         The calling driver is responsible for mapping a user-level input to
 225         the right pins on the i2c device.
 226  */
 227 struct v4l2_subdev_audio_ops {
 228         int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
 229         int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
 230         int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
 231         int (*s_stream)(struct v4l2_subdev *sd, int enable);
 232 };
 233
 234 /* Indicates the @length field specifies maximum data length. */
 235 #define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX         (1U << 0)
 236 /* Indicates user defined data format, i.e. non standard frame format. */
 237 #define V4L2_MBUS_FRAME_DESC_FL_BLOB            (1U << 1)
 238
 239 /**
 240  * struct v4l2_mbus_frame_desc_entry - media bus frame description structure
 241  * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags
 242  * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set
 243  * @length: number of octets per frame, valid for compressed or unspecified
 244  *          formats
 245  */
 246 struct v4l2_mbus_frame_desc_entry {
 247         u16 flags;
 248         u32 pixelcode;
 249         u32 length;
 250 };
 251
 252 #define V4L2_FRAME_DESC_ENTRY_MAX       4
 253
 254 /**
 255  * struct v4l2_mbus_frame_desc - media bus data frame description
 256  * @entry: frame descriptors array
 257  * @num_entries: number of entries in @entry array
 258  */
 259 struct v4l2_mbus_frame_desc {
 260         struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX];
 261         unsigned short num_entries;
 262 };
 263
 264 /*
 265    s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
 266         video input devices.
 267
 268    g_std_output: get current standard for video OUTPUT devices. This is ignored
 269         by video input devices.
 270
 271    g_tvnorms_output: get v4l2_std_id with all standards supported by video
 272         OUTPUT device. This is ignored by video input devices.
 273
 274    s_crystal_freq: sets the frequency of the crystal used to generate the
 275         clocks in Hz. An extra flags field allows device specific configuration
 276         regarding clock frequency dividers, etc. If not used, then set flags
 277         to 0. If the frequency is not supported, then -EINVAL is returned.
 278
 279    g_input_status: get input status. Same as the status field in the v4l2_input
 280         struct.
 281
 282    s_routing: see s_routing in audio_ops, except this version is for video
 283         devices.
 284
 285    s_dv_timings(): Set custom dv timings in the sub device. This is used
 286         when sub device is capable of setting detailed timing information
 287         in the hardware to generate/detect the video signal.
 288
 289    g_dv_timings(): Get custom dv timings in the sub device.
 290
 291    enum_mbus_fmt: enumerate pixel formats, provided by a video data source
 292
 293    g_mbus_fmt: get the current pixel format, provided by a video data source
 294
 295    try_mbus_fmt: try to set a pixel format on a video data source
 296
 297    s_mbus_fmt: set a pixel format on a video data source
 298
 299    g_mbus_config: get supported mediabus configurations
 300
 301    s_mbus_config: set a certain mediabus configuration. This operation is added
 302         for compatibility with soc-camera drivers and should not be used by new
 303         software.
 304
 305    s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev
 306         can adjust @size to a lower value and must not write more data to the
 307         buffer starting at @data than the original value of @size.
 308  */
 309 struct v4l2_subdev_video_ops {
 310         int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
 311         int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
 312         int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
 313         int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
 314         int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
 315         int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
 316         int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
 317         int (*s_stream)(struct v4l2_subdev *sd, int enable);
 318         int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
 319         int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
 320         int (*s_crop)(struct v4l2_subdev *sd, const struct v4l2_crop *crop);
 321         int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
 322         int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
 323         int (*g_frame_interval)(struct v4l2_subdev *sd,
 324                                 struct v4l2_subdev_frame_interval *interval);
 325         int (*s_frame_interval)(struct v4l2_subdev *sd,
 326                                 struct v4l2_subdev_frame_interval *interval);
 327         int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize);
 328         int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival);
 329         int (*s_dv_timings)(struct v4l2_subdev *sd,
 330                         struct v4l2_dv_timings *timings);
 331         int (*g_dv_timings)(struct v4l2_subdev *sd,
 332                         struct v4l2_dv_timings *timings);
 333         int (*enum_dv_timings)(struct v4l2_subdev *sd,
 334                         struct v4l2_enum_dv_timings *timings);
 335         int (*query_dv_timings)(struct v4l2_subdev *sd,
 336                         struct v4l2_dv_timings *timings);
 337         int (*dv_timings_cap)(struct v4l2_subdev *sd,
 338                         struct v4l2_dv_timings_cap *cap);
 339         int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index,
 340                              enum v4l2_mbus_pixelcode *code);
 341         int (*enum_mbus_fsizes)(struct v4l2_subdev *sd,
 342                              struct v4l2_frmsizeenum *fsize);
 343         int (*g_mbus_fmt)(struct v4l2_subdev *sd,
 344                           struct v4l2_mbus_framefmt *fmt);
 345         int (*try_mbus_fmt)(struct v4l2_subdev *sd,
 346                             struct v4l2_mbus_framefmt *fmt);
 347         int (*s_mbus_fmt)(struct v4l2_subdev *sd,
 348                           struct v4l2_mbus_framefmt *fmt);
 349         int (*g_mbus_config)(struct v4l2_subdev *sd,
 350                              struct v4l2_mbus_config *cfg);
 351         int (*s_mbus_config)(struct v4l2_subdev *sd,
 352                              const struct v4l2_mbus_config *cfg);
 353         int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
 354                            unsigned int *size);
 355 };
 356
 357 /*
 358    decode_vbi_line: video decoders that support sliced VBI need to implement
 359         this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the
 360         start of the VBI data that was generated by the decoder. The driver
 361         then parses the sliced VBI data and sets the other fields in the
 362         struct accordingly. The pointer p is updated to point to the start of
 363         the payload which can be copied verbatim into the data field of the
 364         v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the
 365         type field is set to 0 on return.
 366
 367    s_vbi_data: used to generate VBI signals on a video signal.
 368         v4l2_sliced_vbi_data is filled with the data packets that should be
 369         output. Note that if you set the line field to 0, then that VBI signal
 370         is disabled. If no valid VBI data was found, then the type field is
 371         set to 0 on return.
 372
 373    g_vbi_data: used to obtain the sliced VBI packet from a readback register.
 374         Not all video decoders support this. If no data is available because
 375         the readback register contains invalid or erroneous data -EIO is
 376         returned. Note that you must fill in the 'id' member and the 'field'
 377         member (to determine whether CC data from the first or second field
 378         should be obtained).
 379
 380    s_raw_fmt: setup the video encoder/decoder for raw VBI.
 381
 382    g_sliced_fmt: retrieve the current sliced VBI settings.
 383
 384    s_sliced_fmt: setup the sliced VBI settings.
 385  */
 386 struct v4l2_subdev_vbi_ops {
 387         int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
 388         int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
 389         int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
 390         int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap);
 391         int (*s_raw_fmt)(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt);
 392         int (*g_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
 393         int (*s_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
 394 };
 395
 396 /**
 397  * struct v4l2_subdev_sensor_ops - v4l2-subdev sensor operations
 398  * @g_skip_top_lines: number of lines at the top of the image to be skipped.
 399  *                    This is needed for some sensors, which always corrupt
 400  *                    several top lines of the output image, or which send their
 401  *                    metadata in them.
 402  * @g_skip_frames: number of frames to skip at stream start. This is needed for
 403  *                 buggy sensors that generate faulty frames when they are
 404  *                 turned on.
 405  */
 406 struct v4l2_subdev_sensor_ops {
 407         int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines);
 408         int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames);
 409 };
 410
 411 /*
 412    [rt]x_g_parameters: Get the current operating parameters and state of the
 413         the IR receiver or transmitter.
 414
 415    [rt]x_s_parameters: Set the current operating parameters and state of the
 416         the IR receiver or transmitter.  It is recommended to call
 417         [rt]x_g_parameters first to fill out the current state, and only change
 418         the fields that need to be changed.  Upon return, the actual device
 419         operating parameters and state will be returned.  Note that hardware
 420         limitations may prevent the actual settings from matching the requested
 421         settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
 422         was requested.  An exception is when the shutdown parameter is true.
 423         The last used operational parameters will be returned, but the actual
 424         state of the hardware be different to minimize power consumption and
 425         processing when shutdown is true.
 426
 427    rx_read: Reads received codes or pulse width data.
 428         The semantics are similar to a non-blocking read() call.
 429
 430    tx_write: Writes codes or pulse width data for transmission.
 431         The semantics are similar to a non-blocking write() call.
 432  */
 433
 434 enum v4l2_subdev_ir_mode {
 435         V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */
 436 };
 437
 438 struct v4l2_subdev_ir_parameters {
 439         /* Either Rx or Tx */
 440         unsigned int bytes_per_data_element; /* of data in read or write call */
 441         enum v4l2_subdev_ir_mode mode;
 442
 443         bool enable;
 444         bool interrupt_enable;
 445         bool shutdown; /* true: set hardware to low/no power, false: normal */
 446
 447         bool modulation;           /* true: uses carrier, false: baseband */
 448         u32 max_pulse_width;       /* ns,      valid only for baseband signal */
 449         unsigned int carrier_freq; /* Hz,      valid only for modulated signal*/
 450         unsigned int duty_cycle;   /* percent, valid only for modulated signal*/
 451         bool invert_level;         /* invert signal level */
 452
 453         /* Tx only */
 454         bool invert_carrier_sense; /* Send 0/space as a carrier burst */
 455
 456         /* Rx only */
 457         u32 noise_filter_min_width;       /* ns, min time of a valid pulse */
 458         unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */
 459         unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */
 460         u32 resolution;                   /* ns */
 461 };
 462
 463 struct v4l2_subdev_ir_ops {
 464         /* Receiver */
 465         int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
 466                                 ssize_t *num);
 467
 468         int (*rx_g_parameters)(struct v4l2_subdev *sd,
 469                                 struct v4l2_subdev_ir_parameters *params);
 470         int (*rx_s_parameters)(struct v4l2_subdev *sd,
 471                                 struct v4l2_subdev_ir_parameters *params);
 472
 473         /* Transmitter */
 474         int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count,
 475                                 ssize_t *num);
 476
 477         int (*tx_g_parameters)(struct v4l2_subdev *sd,
 478                                 struct v4l2_subdev_ir_parameters *params);
 479         int (*tx_s_parameters)(struct v4l2_subdev *sd,
 480                                 struct v4l2_subdev_ir_parameters *params);
 481 };
 482
 483 /**
 484  * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations
 485  * @get_frame_desc: get the current low level media bus frame parameters.
 486  * @get_frame_desc: set the low level media bus frame parameters, @fd array
 487  *                  may be adjusted by the subdev driver to device capabilities.
 488  */
 489 struct v4l2_subdev_pad_ops {
 490         int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 491                               struct v4l2_subdev_mbus_code_enum *code);
 492         int (*enum_frame_size)(struct v4l2_subdev *sd,
 493                                struct v4l2_subdev_fh *fh,
 494                                struct v4l2_subdev_frame_size_enum *fse);
 495         int (*enum_frame_interval)(struct v4l2_subdev *sd,
 496                                    struct v4l2_subdev_fh *fh,
 497                                    struct v4l2_subdev_frame_interval_enum *fie);
 498         int (*get_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 499                        struct v4l2_subdev_format *format);
 500         int (*set_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 501                        struct v4l2_subdev_format *format);
 502         int (*set_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 503                        struct v4l2_subdev_crop *crop);
 504         int (*get_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 505                        struct v4l2_subdev_crop *crop);
 506         int (*get_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 507                              struct v4l2_subdev_selection *sel);
 508         int (*set_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 509                              struct v4l2_subdev_selection *sel);
 510         int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid);
 511         int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid);
 512 #ifdef CONFIG_MEDIA_CONTROLLER
 513         int (*link_validate)(struct v4l2_subdev *sd, struct media_link *link,
 514                              struct v4l2_subdev_format *source_fmt,
 515                              struct v4l2_subdev_format *sink_fmt);
 516 #endif /* CONFIG_MEDIA_CONTROLLER */
 517         int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
 518                               struct v4l2_mbus_frame_desc *fd);
 519         int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
 520                               struct v4l2_mbus_frame_desc *fd);
 521 };
 522
 523 struct v4l2_subdev_ops {
 524         const struct v4l2_subdev_core_ops       *core;
 525         const struct v4l2_subdev_tuner_ops      *tuner;
 526         const struct v4l2_subdev_audio_ops      *audio;
 527         const struct v4l2_subdev_video_ops      *video;
 528         const struct v4l2_subdev_vbi_ops        *vbi;
 529         const struct v4l2_subdev_ir_ops         *ir;
 530         const struct v4l2_subdev_sensor_ops     *sensor;
 531         const struct v4l2_subdev_pad_ops        *pad;
 532 };
 533
 534 /*
 535  * Internal ops. Never call this from drivers, only the v4l2 framework can call
 536  * these ops.
 537  *
 538  * registered: called when this subdev is registered. When called the v4l2_dev
 539  *      field is set to the correct v4l2_device.
 540  *
 541  * unregistered: called when this subdev is unregistered. When called the
 542  *      v4l2_dev field is still set to the correct v4l2_device.
 543  *
 544  * open: called when the subdev device node is opened by an application.
 545  *
 546  * close: called when the subdev device node is closed.
 547  */
 548 struct v4l2_subdev_internal_ops {
 549         int (*registered)(struct v4l2_subdev *sd);
 550         void (*unregistered)(struct v4l2_subdev *sd);
 551         int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh);
 552         int (*close)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh);
 553 };
 554
 555 #define V4L2_SUBDEV_NAME_SIZE 32
 556
 557 /* Set this flag if this subdev is a i2c device. */
 558 #define V4L2_SUBDEV_FL_IS_I2C                   (1U << 0)
 559 /* Set this flag if this subdev is a spi device. */
 560 #define V4L2_SUBDEV_FL_IS_SPI                   (1U << 1)
 561 /* Set this flag if this subdev needs a device node. */
 562 #define V4L2_SUBDEV_FL_HAS_DEVNODE              (1U << 2)
 563 /* Set this flag if this subdev generates events. */
 564 #define V4L2_SUBDEV_FL_HAS_EVENTS               (1U << 3)
 565
 566 struct regulator_bulk_data;
 567
 568 struct v4l2_subdev_platform_data {
 569         /* Optional regulators uset to power on/off the subdevice */
 570         struct regulator_bulk_data *regulators;
 571         int num_regulators;
 572
 573         /* Per-subdevice data, specific for a certain video host device */
 574         void *host_priv;
 575 };
 576
 577 /* Each instance of a subdev driver should create this struct, either
 578    stand-alone or embedded in a larger struct.
 579  */
 580 struct v4l2_subdev {
 581 #if defined(CONFIG_MEDIA_CONTROLLER)
 582         struct media_entity entity;
 583 #endif
 584         struct list_head list;
 585         struct module *owner;
 586         u32 flags;
 587         struct v4l2_device *v4l2_dev;
 588         const struct v4l2_subdev_ops *ops;
 589         /* Never call these internal ops from within a driver! */
 590         const struct v4l2_subdev_internal_ops *internal_ops;
 591         /* The control handler of this subdev. May be NULL. */
 592         struct v4l2_ctrl_handler *ctrl_handler;
 593         /* name must be unique */
 594         char name[V4L2_SUBDEV_NAME_SIZE];
 595         /* can be used to group similar subdevs, value is driver-specific */
 596         u32 grp_id;
 597         /* pointer to private data */
 598         void *dev_priv;
 599         void *host_priv;
 600         /* subdev device node */
 601         struct video_device *devnode;
 602         /* pointer to the physical device, if any */
 603         struct device *dev;
 604         /* Links this subdev to a global subdev_list or @notifier->done list. */
 605         struct list_head async_list;
 606         /* Pointer to respective struct v4l2_async_subdev. */
 607         struct v4l2_async_subdev *asd;
 608         /* Pointer to the managing notifier. */
 609         struct v4l2_async_notifier *notifier;
 610         /* common part of subdevice platform data */
 611         struct v4l2_subdev_platform_data *pdata;
 612 };
 613
 614 #define media_entity_to_v4l2_subdev(ent) \
 615         container_of(ent, struct v4l2_subdev, entity)
 616 #define vdev_to_v4l2_subdev(vdev) \
 617         ((struct v4l2_subdev *)video_get_drvdata(vdev))
 618
 619 /*
 620  * Used for storing subdev information per file handle
 621  */
 622 struct v4l2_subdev_fh {
 623         struct v4l2_fh vfh;
 624 #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
 625         struct {
 626                 struct v4l2_mbus_framefmt try_fmt;
 627                 struct v4l2_rect try_crop;
 628                 struct v4l2_rect try_compose;
 629         } *pad;
 630 #endif
 631 };
 632
 633 #define to_v4l2_subdev_fh(fh)   \
 634         container_of(fh, struct v4l2_subdev_fh, vfh)
 635
 636 #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
 637 #define __V4L2_SUBDEV_MK_GET_TRY(rtype, fun_name, field_name)           \
 638         static inline struct rtype *                                    \
 639         v4l2_subdev_get_try_##fun_name(struct v4l2_subdev_fh *fh,       \
 640                                        unsigned int pad)                \
 641         {                                                               \
 642                 BUG_ON(pad >= vdev_to_v4l2_subdev(                      \
 643                                         fh->vfh.vdev)->entity.num_pads); \
 644                 return &fh->pad[pad].field_name;                        \
 645         }
 646
 647 __V4L2_SUBDEV_MK_GET_TRY(v4l2_mbus_framefmt, format, try_fmt)
 648 __V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, crop, try_crop)
 649 __V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, compose, try_compose)
 650 #endif
 651
 652 extern const struct v4l2_file_operations v4l2_subdev_fops;
 653
 654 static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
 655 {
 656         sd->dev_priv = p;
 657 }
 658
 659 static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
 660 {
 661         return sd->dev_priv;
 662 }
 663
 664 static inline void v4l2_set_subdev_hostdata(struct v4l2_subdev *sd, void *p)
 665 {
 666         sd->host_priv = p;
 667 }
 668
 669 static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd)
 670 {
 671         return sd->host_priv;
 672 }
 673
 674 #ifdef CONFIG_MEDIA_CONTROLLER
 675 int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd,
 676                                       struct media_link *link,
 677                                       struct v4l2_subdev_format *source_fmt,
 678                                       struct v4l2_subdev_format *sink_fmt);
 679 int v4l2_subdev_link_validate(struct media_link *link);
 680 #endif /* CONFIG_MEDIA_CONTROLLER */
 681 void v4l2_subdev_init(struct v4l2_subdev *sd,
 682                       const struct v4l2_subdev_ops *ops);
 683
 684 /* Call an ops of a v4l2_subdev, doing the right checks against
 685    NULL pointers.
 686
 687    Example: err = v4l2_subdev_call(sd, core, s_std, norm);
 688  */
 689 #define v4l2_subdev_call(sd, o, f, args...)                             \
 690         (!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \
 691                 (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
 692
 693 /* Send a notification to v4l2_device. */
 694 #define v4l2_subdev_notify(sd, notification, arg)                          \
 695         ((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \
 696          (sd)->v4l2_dev->notify((sd), (notification), (arg)))
 697
 698 #define v4l2_subdev_has_op(sd, o, f) \
 699         ((sd)->ops->o && (sd)->ops->o->f)
 700
 701 #endif