1 Mon Dec 1 12:24:44 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3 * m68k.h: Fix comment describing operand types.
6 Sun Nov 23 22:31:27 1997 Michael Meissner <meissner@cygnus.com>
8 * d30v.h (SHORT_CMPU): Add case for cmpu instruction, and move
9 everything else after down.
12 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
14 * d10v.h (OPERAND_FLAG): Split into:
15 (OPERAND_FFLAG, OPERAND_CFLAG) .
17 Thu Nov 13 11:04:24 1997 Gavin Koch <gavin@cygnus.com>
19 * mips.h (struct mips_opcode): Changed comments to reflect new
23 Wed Oct 29 17:33:37 1997 Gavin Koch <gavin@cygnus.com>
25 * mips.h (INSN_4900): Added.
28 Fri Oct 24 22:36:20 1997 Ken Raeburn <raeburn@cygnus.com>
30 * mips.h: Added to comments a quick-ref list of all assigned
31 operand type characters.
33 (OP_{MASK,SH}_{PERFREG,VECBYTE,VECALIGN}): New macros for VR5400
37 Wed Oct 22 17:28:33 1997 Richard Henderson <rth@cygnus.com>
39 * sparc.h: Add '_' and '/' for v9a asr's.
40 Patch from David Miller <davem@vger.rutgers.edu>
42 Tue Oct 14 13:22:29 1997 Jeffrey A Law (law@cygnus.com)
44 * h8300.h: Bit ops with absolute addresses not in the 8 bit
45 area are not available in the base model (H8/300).
47 Thu Sep 25 13:03:41 1997 Ian Lance Taylor <ian@cygnus.com>
49 * m68k.h: Remove documentation of ` operand specifier.
51 Wed Sep 24 19:00:34 1997 Ian Lance Taylor <ian@cygnus.com>
53 * m68k.h: Document q and v operand specifiers.
55 Mon Sep 15 18:28:37 1997 Nick Clifton <nickc@cygnus.com>
57 * v850.h (struct v850_opcode): Add processors field.
58 (PROCESSOR_V850, PROCESSOR_ALL): New bit constants.
60 (PROCESSOR_V850E, PROCESSOR_NOT_V850): New bit constants.
61 (PROCESSOR_V850EA): New bit constants.
65 Mon Sep 15 11:29:43 1997 Ken Raeburn <raeburn@cygnus.com>
67 Merge changes from Martin Hunt:
69 * d30v.h: Allow up to 64 control registers. Add
72 * d30v.h (LONG_Db): New form for delayed branches.
74 * d30v.h: (LONG_Db): New form for repeati.
76 * d30v.h (SHORT_D2B): New form.
78 * d30v.h (SHORT_A2): New form.
80 * d30v.h (OPERAND_2REG): Add new operand to indicate 2
81 registers are used. Needed for VLIW optimization.
84 Mon Sep 8 14:05:45 1997 Doug Evans <dje@canuck.cygnus.com>
86 * cgen.h: Move assembler interface section
87 up so cgen_parse_operand_result is defined for cgen_parse_address.
88 (cgen_parse_address): Update prototype.
90 Tue Sep 2 15:32:32 1997 Nick Clifton <nickc@cygnus.com>
92 * v850.h (V850_OPREAND_ADJUST_SHORT_MEMORY): Removed.
94 Tue Aug 26 12:21:52 1997 Ian Lance Taylor <ian@cygnus.com>
96 * i386.h (two_byte_segment_defaults): Correct base register 5 in
97 modes 1 and 2 to be ss rather than ds. From Gabriel Paubert
100 * i386.h: Set ud2 to 0x0f0b. From Gabriel Paubert
103 * i386.h: Comment fixes for ficom[p]?{s,l} from Gabriel Paubert
106 * i386.h (JUMP_ON_CX_ZERO): Uncomment (define again).
107 (JUMP_ON_ECX_ZERO): Remove commented out macro.
109 Fri Aug 22 10:38:29 1997 Nick Clifton <nickc@cygnus.com>
111 * v850.h (V850_NOT_R0): New flag.
113 Mon Aug 18 11:05:58 1997 Nick Clifton <nickc@cygnus.com>
115 * v850.h (struct v850_opcode): Remove flags field.
117 Wed Aug 13 18:45:48 1997 Nick Clifton <nickc@cygnus.com>
119 * v850.h (struct v850_opcode): Add flags field.
120 (struct v850_operand): Extend meaning of 'bits' and 'shift'
124 (V850E_INSTRUCTION, V850EA_INSTRUCTION): New flags.
125 (V850E_PUSH_POP, V850E_IMMEDIATE16, V850E_IMMEDIATE32): New flags.
128 Fri Aug 8 16:58:42 1997 Doug Evans <dje@canuck.cygnus.com>
132 Thu Jul 24 21:16:58 1997 Doug Evans <dje@canuck.cygnus.com>
134 * sparc.h (sparc_opcodes): Declare as const.
136 Thu Jul 10 12:53:25 1997 Jeffrey A Law (law@cygnus.com)
138 * mips.h (FP_S, FP_D): Define. Bitmasks indicating if an insn
139 uses single or double precision floating point resources.
140 (INSN_NO_ISA, INSN_ISA1): Define.
141 (cpu specific INSN macros): Tweak into bitmasks outside the range
144 Mon Jun 16 14:10:00 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
146 * i386.h: Fix pand opcode.
148 Mon Jun 2 11:35:09 1997 Gavin Koch <gavin@cygnus.com>
150 * mips.h: Widen INSN_ISA and move it to a more convenient
151 bit position. Add INSN_3900.
153 Tue May 20 11:25:29 1997 Gavin Koch <gavin@cygnus.com>
155 * mips.h (struct mips_opcode): added new field membership.
157 Mon May 12 16:26:50 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
159 * i386.h (movd): only Reg32 is allowed.
161 * i386.h: add fcomp and ud2. From Wayne Scott
162 <wscott@ichips.intel.com>.
164 Mon May 5 17:16:21 1997 Ian Lance Taylor <ian@cygnus.com>
166 * i386.h: Add MMX instructions.
168 Mon May 5 12:45:19 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
170 * i386.h: Remove W modifier from conditional move instructions.
172 Mon Apr 14 14:56:58 1997 Ian Lance Taylor <ian@cygnus.com>
174 * i386.h: Change the opcodes for fsubp, fsubrp, fdivp, and fdivrp
175 with no arguments to match that generated by the UnixWare
178 Thu Apr 10 14:35:00 1997 Doug Evans <dje@canuck.cygnus.com>
180 * cgen.h (<cpu>_cgen_assemble_insn): New arg for errmsg.
181 (cgen_parse_operand_fn): Declare.
182 (cgen_init_parse_operand): Declare.
183 (cgen_parse_operand): Renamed from cgen_asm_parse_operand,
185 (enum cgen_parse_operand_result): Renamed from cgen_asm_result.
186 (enum cgen_parse_operand_type): New enum.
188 Sat Apr 5 13:14:05 1997 Ian Lance Taylor <ian@cygnus.com>
190 * i386.h: Revert last patch for the NON_BROKEN_OPCODES cases.
192 Fri Apr 4 11:46:11 1997 Doug Evans <dje@canuck.cygnus.com>
196 Fri Apr 4 14:02:32 1997 Ian Lance Taylor <ian@cygnus.com>
198 * i386.h: Correct opcode values for fsubp, fsubrp, fdivp, and
201 Tue Mar 25 22:57:26 1997 Stu Grossman (grossman@critters.cygnus.com)
203 * v850.h (extract): Make unsigned.
205 Mon Mar 24 14:38:15 1997 Ian Lance Taylor <ian@cygnus.com>
209 Thu Mar 20 19:49:10 1997 Ian Lance Taylor <ian@cygnus.com>
211 * i386.h: Change DW to W for cmpxchg and xadd, since they don't
212 take a direction bit.
214 start-sanitize-coldfire
215 Wed Mar 19 06:24:58 1997 J.T. Conklin <jtc@cygnus.com>
217 * m68k.h (mcfmac, mcfdiv): New macros.
219 end-sanitize-coldfire
220 Sat Mar 15 19:03:29 1997 H.J. Lu <hjl@lucon.org>
222 * sparc.h (sparc_opcode_lookup_arch): Use full prototype.
224 Fri Mar 14 15:22:01 1997 Ian Lance Taylor <ian@cygnus.com>
226 * sparc.h: Include <ansidecl.h>. Update function declarations to
227 use prototypes, and to use const when appropriate.
229 Thu Mar 6 14:18:30 1997 Jeffrey A Law (law@cygnus.com)
231 * mn10300.h (MN10300_OPERAND_RELAX): Define.
233 Mon Feb 24 15:15:56 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
235 * d10v.h: Change pre_defined_registers to
236 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
238 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
240 * mips.h: Add macros for cop0, cop1 cop2 and cop3.
241 Change mips_opcodes from const array to a pointer,
242 and change bfd_mips_num_opcodes from const int to int,
243 so that we can increase the size of the mips opcodes table
247 Fri Feb 21 16:34:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
249 * d30v.h (FLAG_X): Remove unused flag.
251 Tue Feb 18 17:37:20 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
257 Fri Feb 14 13:16:15 1997 Fred Fish <fnf@cygnus.com>
259 * tic80.h (PDS_NAME): Macro to access name field of predefined symbols.
260 (PDS_VALUE): Macro to access value field of predefined symbols.
261 (tic80_next_predefined_symbol): Add prototype.
265 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
271 Mon Feb 10 10:32:17 1997 Fred Fish <fnf@cygnus.com>
273 * tic80.h (tic80_symbol_to_value): Change prototype to match
274 change in function, added class parameter.
276 Thu Feb 6 17:30:15 1997 Fred Fish <fnf@cygnus.com>
278 * tic80.h (TIC80_OPERAND_ENDMASK): Add for flagging TIc80
279 endmask fields, which are somewhat weird in that 0 and 32 are
280 treated exactly the same.
282 Thu Jan 30 13:46:18 1997 Fred Fish <fnf@cygnus.com>
284 * tic80.h: Change all the OPERAND defines to use the form (1 << X)
285 rather than a constant that is 2**X. Reorder them to put bits for
286 operands that have symbolic names in the upper bits, so they can
287 be packed into an int where the lower bits contain the value that
288 corresponds to that symbolic name.
289 (predefined_symbo): Add struct.
290 (tic80_predefined_symbols): Declare array of translations.
291 (tic80_num_predefined_symbols): Declare size of that array.
292 (tic80_value_to_symbol): Declare function.
293 (tic80_symbol_to_value): Declare function.
296 Wed Jan 29 09:37:25 1997 Jeffrey A Law (law@cygnus.com)
298 * mn10200.h (MN10200_OPERAND_RELAX): Define.
301 Sat Jan 18 15:18:59 1997 Fred Fish <fnf@cygnus.com>
303 * tic80.h (TIC80_NO_R0_DEST): Add for opcodes where r0 cannot
304 be the destination register.
306 Thu Jan 16 20:48:55 1997 Fred Fish <fnf@cygnus.com>
308 * tic80.h (struct tic80_opcode): Change "format" field to "flags".
309 (FMT_UNUSED, FMT_SI, FMT_LI, FMT_REG): Delete.
310 (TIC80_VECTOR): Define a flag bit for the flags. This one means
311 that the opcode can have two vector instructions in a single
312 32 bit word and we have to encode/decode both.
314 Tue Jan 14 19:37:09 1997 Fred Fish <fnf@cygnus.com>
316 * tic80.h (TIC80_OPERAND_PCREL): Renamed from
317 TIC80_OPERAND_RELATIVE for PC relative.
318 (TIC80_OPERAND_BASEREL): New flag bit for register
321 Mon Jan 13 15:56:38 1997 Fred Fish <fnf@cygnus.com>
323 * tic80.h (TIC80_OPERAND_FLOAT): Add for floating point operands.
325 Mon Jan 6 10:51:15 1997 Fred Fish <fnf@cygnus.com>
327 * tic80.h (TIC80_OPERAND_SCALED): Operand may have optional
328 ":s" modifier for scaling.
330 Sun Jan 5 12:12:19 1997 Fred Fish <fnf@cygnus.com>
332 * tic80.h (TIC80_OPERAND_M_SI): Add operand modifier for ":m".
333 (TIC80_OPERAND_M_LI): Ditto
335 Sat Jan 4 19:02:44 1997 Fred Fish <fnf@cygnus.com>
337 * tic80.h (TIC80_OPERAND_BITNUM): Renamed from TIC80_OPERAND_CC_SZ.
338 (TIC80_OPERAND_CC): New define for condition code operand.
339 (TIC80_OPERAND_CR): New define for control register operand.
341 Fri Jan 3 16:22:23 1997 Fred Fish <fnf@cygnus.com>
343 * tic80.h (struct tic80_opcode): Name changed.
344 (struct tic80_opcode): Remove format field.
345 (struct tic80_operand): Add insertion and extraction functions.
346 (TIC80_OPERAND_*): Remove old bogus values, start adding new
351 Tue Dec 31 15:05:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
353 * v850.h (V850_OPERAND_ADJUST_SHORT_MEMORY): New flag to adjust
354 type IV instruction offsets.
357 Fri Dec 27 22:23:10 1996 Fred Fish <fnf@cygnus.com>
362 Wed Dec 18 10:06:31 1996 Jeffrey A Law (law@cygnus.com)
364 * mn10200.h (MN10200_OPERAND_NOCHECK): Define.
366 Sat Dec 14 10:48:31 1996 Fred Fish <fnf@ninemoons.com>
368 * mn10200.h: Fix comment, mn10200_operand not powerpc_operand.
369 * mn10300.h: Fix comment, mn10300_operand not powerpc_operand.
370 * v850.h: Fix comment, v850_operand not powerpc_operand.
372 Mon Dec 9 16:45:39 1996 Jeffrey A Law (law@cygnus.com)
374 * mn10200.h: Flesh out structures and definitions needed by
375 the mn10200 assembler & disassembler.
377 Tue Nov 26 10:46:56 1996 Ian Lance Taylor <ian@cygnus.com>
379 * mips.h: Add mips16 definitions.
381 Mon Nov 25 17:56:54 1996 J.T. Conklin <jtc@cygnus.com>
383 * m68k.h: Document new <, >, m, n, o and p operand specifiers.
385 Wed Nov 20 10:59:41 1996 Jeffrey A Law (law@cygnus.com)
387 * mn10300.h (MN10300_OPERAND_PCREL): Define.
388 (MN10300_OPERAND_MEMADDR): Define.
390 Tue Nov 19 13:30:40 1996 Jeffrey A Law (law@cygnus.com)
392 * mn10300.h (MN10300_OPERAND_REG_LIST): Define.
394 Wed Nov 6 13:41:08 1996 Jeffrey A Law (law@cygnus.com)
396 * mn10300.h (MN10300_OPERAND_SPLIT): Define.
398 Tue Nov 5 13:26:12 1996 Jeffrey A Law (law@cygnus.com)
400 * mn10300.h (MN10300_OPERAND_EXTENDED): Define.
402 Mon Nov 4 12:52:48 1996 Jeffrey A Law (law@cygnus.com)
404 * mn10300.h (MN10300_OPERAND_REPEATED): Define.
406 Fri Nov 1 10:31:02 1996 Richard Henderson <rth@tamu.edu>
408 * alpha.h: Don't include "bfd.h"; private relocation types are now
409 negative to minimize problems with shared libraries. Organize
410 instruction subsets by AMASK extensions and PALcode
412 (struct alpha_operand): Move flags slot for better packing.
414 Tue Oct 29 12:19:10 1996 Jeffrey A Law (law@cygnus.com)
416 * v850.h (V850_OPERAND_RELAX): New operand flag.
418 Thu Oct 10 14:29:11 1996 Jeffrey A Law (law@cygnus.com)
420 * mn10300.h (FMT_*): Move operand format definitions
423 Tue Oct 8 14:48:07 1996 Jeffrey A Law (law@cygnus.com)
425 * mn10300.h (MN10300_OPERAND_PAREN): Define.
427 Mon Oct 7 16:52:11 1996 Jeffrey A Law (law@cygnus.com)
429 * mn10300.h (mn10300_opcode): Add "format" field.
430 (MN10300_OPERAND_*): Define.
432 Thu Oct 3 10:33:46 1996 Jeffrey A Law (law@cygnus.com)
435 * mn10200.h, mn10300.h: New files.
437 Wed Oct 2 21:31:26 1996 Jeffrey A Law (law@cygnus.com)
439 * mn10x00.h: New file.
441 Fri Sep 27 18:26:46 1996 Stu Grossman (grossman@critters.cygnus.com)
443 * v850.h: Add new flag to indicate this instruction uses a PC
446 Fri Sep 13 14:58:13 1996 Jeffrey A Law (law@cygnus.com)
448 * h8300.h (stmac): Add missing instruction.
450 Sat Aug 31 16:02:03 1996 Jeffrey A Law (law@cygnus.com)
452 * v850.h (v850_opcode): Remove "size" field. Add "memop"
455 Fri Aug 23 10:39:08 1996 Jeffrey A Law (law@cygnus.com)
457 * v850.h (V850_OPERAND_EP): Define.
459 * v850.h (v850_opcode): Add size field.
461 Thu Aug 22 16:51:25 1996 J.T. Conklin <jtc@rtl.cygnus.com>
463 * v850.h (v850_operands): Add insert and extract fields, pointers
464 to functions used to handle unusual operand encoding.
465 (V850_OPERAND_REG, V850_OPERAND_SRG, V850_OPERAND_CC,
466 V850_OPERAND_SIGNED): Defined.
468 Wed Aug 21 17:45:10 1996 J.T. Conklin <jtc@rtl.cygnus.com>
470 * v850.h (v850_operands): Add flags field.
471 (OPERAND_REG, OPERAND_NUM): Defined.
473 Tue Aug 20 14:52:02 1996 J.T. Conklin <jtc@rtl.cygnus.com>
477 Fri Aug 16 14:44:15 1996 James G. Smith <jsmith@cygnus.co.uk>
479 * mips.h (OP_SH_LOCC, OP_SH_HICC, OP_MASK_CC, OP_SH_COP1NORM,
480 OP_MASK_COP1NORM, OP_SH_COP1SPEC, OP_MASK_COP1SPEC,
481 OP_MASK_COP1SCLR, OP_MASK_COP1CMP, OP_SH_COP1CMP, OP_SH_FORMAT,
482 OP_MASK_FORMAT, OP_SH_TRUE, OP_MASK_TRUE, OP_SH_GE, OP_MASK_GE,
483 OP_SH_UNSIGNED, OP_MASK_UNSIGNED, OP_SH_HINT, OP_MASK_HINT):
486 Fri Aug 16 00:15:15 1996 Jeffrey A Law (law@cygnus.com)
488 * hppa.h (pitlb, pitlbe, iitlba, iitlbp, fic, fice): Accept
489 a 3 bit space id instead of a 2 bit space id.
491 Thu Aug 15 13:11:46 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
493 * d10v.h: Add some additional defines to support the
494 assembler in determining which operations can be done in parallel.
496 Tue Aug 6 11:13:22 1996 Jeffrey A Law (law@cygnus.com)
498 * h8300.h (SN): Define.
499 (eepmov.b): Renamed from "eepmov"
500 (nop, bpt, rte, rts, sleep, clrmac): These have no size associated
503 Fri Jul 26 11:47:10 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
505 * d10v.h (OPERAND_SHIFT): New operand flag.
507 Thu Jul 25 12:06:22 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
509 * d10v.h: Changes for divs, parallel-only instructions, and
512 Mon Jul 22 11:21:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
514 * d10v.h (pd_reg): Define. Putting the definition here allows
515 the assembler and disassembler to share the same struct.
517 Mon Jul 22 12:15:25 1996 Ian Lance Taylor <ian@cygnus.com>
519 * i960.h (i960_opcodes): "halt" takes an argument. From Stephen
520 Williams <steve@icarus.com>.
522 Wed Jul 17 14:46:38 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
526 Thu Jul 11 12:09:15 1996 Jeffrey A Law (law@cygnus.com)
528 * h8300.h (band, bclr): Force high bit of immediate nibble to zero.
530 Wed Jul 3 14:30:12 1996 J.T. Conklin <jtc@rtl.cygnus.com>
532 * m68k.h (mcf5200): New macro.
533 Document names of coldfire control registers.
535 Tue Jul 2 23:05:45 1996 Jeffrey A Law (law@cygnus.com)
537 * h8300.h (SRC_IN_DST): Define.
539 * h8300.h (UNOP3): Mark the register operand in this insn
540 as a source operand, not a destination operand.
541 (SHIFT_2, SHIFT_IMM): Remove. Eliminate all references.
542 (UNOP3): Change SHIFT_IMM to IMM for H8/S bitops. Mark
543 register operand with SRC_IN_DST.
545 Fri Jun 21 13:52:17 1996 Richard Henderson <rth@tamu.edu>
549 Thu Jun 20 15:02:57 1996 Ian Lance Taylor <ian@cygnus.com>
551 * rs6k.h: Remove obsolete file.
553 Wed Jun 19 15:29:38 1996 Ian Lance Taylor <ian@cygnus.com>
555 * i386.h: Correct opcode values for faddp, fsubp, fsubrp, fmulp,
556 fdivp, and fdivrp. Add ffreep.
558 Tue Jun 18 16:06:00 1996 Jeffrey A. Law <law@rtl.cygnus.com>
560 * h8300.h: Reorder various #defines for readability.
561 (ABS32SRC, ABS32DST, DSP32LIST, ABS32LIST, A32LIST): Define.
562 (BITOP): Accept additional (unused) argument. All callers changed.
565 (ldc, stc, movb, movw, movl): Use 32bit offsets and absolutes.
567 * h8300.h (EXR, SHIFT_2, MACREG, SHIFT_IMM, RDINC): Define.
568 (O_TAS, O_CLRMAC, O_LDMAC, O_MAC, O_LDM, O_STM): Define.
569 (BITOP, EBITOP): Handle new H8/S addressing modes for
571 (UNOP3): Handle new shift/rotate insns on the H8/S.
572 (insns using exr): New instructions.
573 (tas, mac, ldmac, clrmac, ldm, stm): New instructions.
575 Thu May 23 16:56:48 1996 Jeffrey A Law (law@cygnus.com)
577 * h8300.h (add.l): Undo Apr 5th change. The manual I had
580 Mon May 6 23:38:22 1996 Jeffrey A Law (law@cygnus.com)
582 * h8300.h (START): Remove.
583 (MEMRELAX): Define. Mark absolute memory operands in mov.b, mov.w
584 and mov.l insns that can be relaxed.
586 Tue Apr 30 18:30:58 1996 Ian Lance Taylor <ian@cygnus.com>
588 * i386.h: Remove Abs32 from lcall.
590 Mon Apr 22 17:09:23 1996 Doug Evans <dje@blues.cygnus.com>
592 * sparc.h (SPARC_OPCODE_ARCH_V9_P): New macro.
594 Mark X,Y opcode letters as in use.
596 Thu Apr 11 17:28:18 1996 Ian Lance Taylor <ian@cygnus.com>
598 * sparc.h (F_FLOAT, F_FBR): Define.
600 Fri Apr 5 16:55:34 1996 Jeffrey A Law (law@cygnus.com)
602 * h8300.h (ABS8MEM): Renamed from ABSMOV. Remove ABSMOV
604 (ABS8SRC,ABS8DST): Add ABS8MEM.
605 (add.l): Fix reg+reg variant.
606 (eepmov.w): Renamed from eepmovw.
607 (ldc,stc): Fix many cases.
609 Sun Mar 31 13:30:03 1996 Doug Evans <dje@canuck.cygnus.com>
611 * sparc.h (SPARC_OPCODE_ARCH_MASK): New macro.
613 Thu Mar 7 15:08:23 1996 Doug Evans <dje@charmed.cygnus.com>
615 * sparc.h (O): Mark operand letter as in use.
617 Tue Feb 20 20:46:21 1996 Doug Evans <dje@charmed.cygnus.com>
619 * sparc.h (sparc_{encode,decode}_sparclet_cpreg): Declare.
620 Mark operand letters uU as in use.
622 Mon Feb 19 01:59:08 1996 Doug Evans <dje@charmed.cygnus.com>
624 * sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_SPARCLET.
625 (sparc_opcode_arch): Delete member `conflicts'. Add `supported'.
626 (SPARC_OPCODE_SUPPORTED): New macro.
627 (SPARC_OPCODE_CONFLICT_P): Rewrite.
630 Fri Feb 16 12:23:34 1996 Jeffrey A Law (law@cygnus.com)
632 * sparc.h (sparc_opcode_lookup_arch) Make return type in
633 declaration consistent with return type in definition.
635 Wed Feb 14 18:14:11 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
637 * i386.h (i386_optab): Remove Data32 from pushf and popf.
639 Thu Feb 8 14:27:21 1996 James Carlson <carlson@xylogics.com>
641 * i386.h (i386_regtab): Add 80486 test registers.
643 Mon Feb 5 18:35:46 1996 Ian Lance Taylor <ian@cygnus.com>
645 * i960.h (I_HX): Define.
646 (i960_opcodes): Add HX instruction.
648 Mon Jan 29 12:43:39 1996 Ken Raeburn <raeburn@cygnus.com>
650 * i386.h: Fix waiting forms of finit, fstenv, fsave, fstsw, fstcw,
653 Wed Jan 24 22:36:59 1996 Doug Evans <dje@charmed.cygnus.com>
655 * sparc.h (enum sparc_opcode_arch_val): Replaces sparc_architecture.
656 (SPARC_OPCODE_CONFLICT_P): Renamed from ARCHITECTURES_CONFLICT_P.
657 (bfd_* defines): Delete.
658 (sparc_opcode_archs): Replaces architecture_pname.
659 (sparc_opcode_lookup_arch): Declare.
660 (NUMOPCODES): Delete.
662 Mon Jan 22 08:24:32 1996 Doug Evans <dje@charmed.cygnus.com>
664 * sparc.h (enum sparc_architecture): Add v9a.
665 (ARCHITECTURES_CONFLICT_P): Update.
667 Thu Dec 28 13:27:53 1995 John Hassey <hassey@rtp.dg.com>
669 * i386.h: Added Pentium Pro instructions.
671 Thu Nov 2 22:59:22 1995 Ian Lance Taylor <ian@cygnus.com>
673 * m68k.h: Document new 'W' operand place.
675 Tue Oct 24 10:49:10 1995 Jeffrey A Law (law@cygnus.com)
677 * hppa.h: Add lci and syncdma instructions.
679 Mon Oct 23 11:09:16 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
681 * mips.h: Added INSN_4100 flag to mark NEC VR4100 specific
684 Mon Oct 16 10:28:15 1995 Michael Meissner <meissner@tiktok.cygnus.com>
686 * ppc.h (PPC_OPCODE_{COMMON,ANY}): New opcode flags for
687 assembler's -mcom and -many switches.
689 Wed Oct 11 16:56:33 1995 Ken Raeburn <raeburn@cygnus.com>
691 * i386.h: Fix cmpxchg8b extension opcode description.
693 Thu Oct 5 18:03:36 1995 Ken Raeburn <raeburn@cygnus.com>
695 * i386.h: Add Pentium instructions wrmsr, rdtsc, rdmsr, cmpxchg8b,
698 Tue Sep 19 15:26:43 1995 Ian Lance Taylor <ian@cygnus.com>
700 * m68k.h: Change comment: split type P into types 0, 1 and 2.
702 Wed Aug 30 13:50:55 1995 Doug Evans <dje@canuck.cygnus.com>
704 * sparc.h (sparc_{encode,decode}_prefetch): Declare.
706 Tue Aug 29 15:34:58 1995 Doug Evans <dje@canuck.cygnus.com>
708 * sparc.h (sparc_{encode,decode}_{asi,membar}): Declare.
710 Wed Aug 2 18:32:19 1995 Ian Lance Taylor <ian@cygnus.com>
714 * m68k.h: Move tables into opcodes/m68k-opc.c, leaving just the
715 declarations. Remove F_ALIAS and flag field of struct
716 m68k_opcode. Change arch field of struct m68k_opcode to unsigned
717 int. Make name and args fields of struct m68k_opcode const.
719 Wed Aug 2 08:16:46 1995 Doug Evans <dje@canuck.cygnus.com>
721 * sparc.h (F_NOTV9): Define.
723 Tue Jul 11 14:20:42 1995 Jeff Spiegel <jeffs@lsil.com>
725 * mips.h (INSN_4010): Define.
727 Wed Jun 21 18:49:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
729 * m68k.h (TBL1): Reverse sense of "round" argument in result.
731 Changes from Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>:
732 * m68k.h: Fix argument descriptions of coprocessor
733 instructions to allow only alterable operands where appropriate.
734 [!NO_DEFAULT_SIZES]: An omitted size defaults to `w'.
735 (m68k_opcode_aliases): Add more aliases.
737 Fri Apr 14 22:15:34 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
739 * m68k.h: Added explcitly short-sized conditional branches, and a
740 bunch of aliases (fmov*, ftest*, tdivul) to support gcc's
741 svr4-based configurations.
743 Mon Mar 13 21:30:01 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
745 Mon Feb 27 08:36:39 1995 Bryan Ford <baford@cs.utah.edu>
746 * i386.h: added missing Data16/Data32 flags to a few instructions.
748 Wed Mar 8 15:19:53 1995 Ian Lance Taylor <ian@cygnus.com>
750 * mips.h (OP_MASK_FR, OP_SH_FR): Define.
751 (OP_MASK_BCC, OP_SH_BCC): Define.
752 (OP_MASK_PREFX, OP_SH_PREFX): Define.
753 (OP_MASK_CCC, OP_SH_CCC): Define.
754 (INSN_READ_FPR_R): Define.
757 Wed Mar 8 03:13:23 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
759 * m68k.h (enum m68k_architecture): Deleted.
760 (struct m68k_opcode_alias): New type.
761 (m68k_opcodes): Now const. Deleted opcode aliases with exactly
762 matching constraints, values and flags. As a side effect of this,
763 the MOTOROLA_SYNTAX_ONLY and MIT_SYNTAX_ONLY macros, which so far
764 as I know were never used, now may need re-examining.
765 (numopcodes): Now const.
766 (m68k_opcode_aliases, numaliases): New variables.
768 [DONT_DEFINE_TABLE]: Declare numopcodes, numaliases, and
769 m68k_opcode_aliases; update declaration of m68k_opcodes.
771 Mon Mar 6 10:02:00 1995 Jeff Law (law@snake.cs.utah.edu)
773 * hppa.h (delay_type): Delete unused enumeration.
774 (pa_opcode): Replace unused delayed field with an architecture
776 (pa_opcodes): Mark each instruction as either PA1.0 or PA1.1.
778 Fri Mar 3 16:10:24 1995 Ian Lance Taylor <ian@cygnus.com>
780 * mips.h (INSN_ISA4): Define.
782 Fri Feb 24 19:13:37 1995 Ian Lance Taylor <ian@cygnus.com>
784 * mips.h (M_DLA_AB, M_DLI): Define.
786 Thu Feb 23 17:33:09 1995 Jeff Law (law@snake.cs.utah.edu)
788 * hppa.h (fstwx): Fix single-bit error.
790 Wed Feb 15 12:19:52 1995 Ian Lance Taylor <ian@cygnus.com>
792 * mips.h (M_ULD, M_ULD_A, M_USD, M_USD_A): Define.
794 Mon Feb 6 10:35:23 1995 J.T. Conklin <jtc@rtl.cygnus.com>
796 * i386.h: added cpuid instruction , and dr[0-7] aliases for the
797 debug registers. From Charles Hannum (mycroft@netbsd.org).
799 Mon Feb 6 03:31:54 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
801 Changes from Bryan Ford <baford@schirf.cs.utah.edu> for 16-bit
803 * i386.h (MOV_AX_DISP32): New macro.
804 (i386_optab): Added Data16 and Data32 as needed. Added "w" forms
805 of several call/return instructions.
806 (ADDR_PREFIX_OPCODE): New macro.
808 Mon Jan 23 16:45:43 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
810 Sat Jan 21 17:50:38 1995 Pat Rankin (rankin@eql.caltech.edu)
812 * ../include/opcode/vax.h (struct vot_wot, field `args'): make
813 it pointer to const char;
814 (struct vot, field `name'): ditto.
816 Thu Jan 19 14:47:53 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
818 * vax.h: Supply and properly group all values in end sentinel.
820 Tue Jan 17 10:55:30 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
822 * mips.h (INSN_ISA, INSN_4650): Define.
824 Wed Oct 19 13:34:17 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
826 * a29k.h: Add operand type 'I' for `inv' and `iretinv'. On
827 systems with a separate instruction and data cache, such as the
828 29040, these instructions take an optional argument.
830 Wed Sep 14 17:44:20 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
832 * mips.h (INSN_STORE_MEMORY): Correct value to not conflict with
835 Tue Sep 6 11:39:08 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
837 * mips.h (INSN_STORE_MEMORY): Define.
839 Thu Jul 28 19:28:07 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
841 * sparc.h: Document new operand type 'x'.
843 Tue Jul 26 17:48:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
845 * i960.h (I_CX2): New instruction category. It includes
846 instructions available on Cx and Jx processors.
847 (I_JX): New instruction category, for JX-only instructions.
848 (i960_opcodes): Put eshro and sysctl in I_CX2 category. Added
849 Jx-only instructions, in I_JX category.
851 Wed Jul 13 18:43:47 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
853 * ns32k.h (endop): Made pointer const too.
855 Sun Jul 10 11:01:09 1994 Ian Dall (dall@hfrd.dsto.gov.au)
857 * ns32k.h: Drop Q operand type as there is no correct use
858 for it. Add I and Z operand types which allow better checking.
860 Thu Jul 7 12:34:48 1994 Steve Chamberlain (sac@jonny.cygnus.com)
862 * h8300.h (xor.l) :fix bit pattern.
863 (L_2): New size of operand.
866 Fri Jun 10 16:38:11 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
868 * m68k.h: Move "trap" before "tpcc" to change disassembly.
870 Fri Jun 3 15:57:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
872 * sparc.h: Include v9 definitions.
874 Thu Jun 2 12:23:17 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
876 * m68k.h (m68060): Defined.
877 (m68040up, mfloat, mmmu): Include it.
878 (struct m68k_opcode): Widen `arch' field.
879 (m68k_opcodes): Updated for M68060. Removed comments that were
880 instructions commented out by "JF" years ago.
882 Thu Apr 28 18:31:14 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
884 * m68k.h (struct m68k_opcode): Shorten `arch' field to 8 bits, and
885 add a one-bit `flags' field.
886 (F_ALIAS): New macro.
888 Wed Apr 27 11:29:52 1994 Steve Chamberlain (sac@cygnus.com)
890 * h8300.h (dec, inc): Get encoding right.
892 Mon Apr 4 13:12:43 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
894 * ppc.h (struct powerpc_operand): Removed signedp field; just use
896 (PPC_OPERAND_SIGNED): Define.
897 (PPC_OPERAND_SIGNOPT): Define.
899 Thu Mar 31 19:34:08 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
901 * i386.h (IS_JUMP_ON_ECX_ZERO, "jcxz" pattern): Operand size
902 prefix is 0x66, not 0x67. Patch from H.J. Lu (hlu@nynexst.com).
904 Thu Mar 3 15:51:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
906 * i386.h: Reverse last change. It'll be handled in gas instead.
908 Thu Feb 24 15:29:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
910 * i386.h (sar): Disabled the two-operand Imm1 form, since it was
911 slower on the 486 and used the implicit shift count despite the
912 explicit operand. The one-operand form is still available to get
913 the shorter form with the implicit shift count.
915 Thu Feb 17 12:27:52 1994 Torbjorn Granlund (tege@mexican.cygnus.com)
917 * hppa.h: Fix typo in fstws arg string.
919 Wed Feb 9 21:23:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
921 * ppc.h (struct powerpc_opcode): Make operands field unsigned.
923 Mon Feb 7 19:14:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
925 * ppc.h (PPC_OPCODE_601): Define.
927 Fri Feb 4 23:43:50 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
929 * hppa.h (addb): Use '@' for addb and addib pseudo ops.
930 (so we can determine valid completers for both addb and addb[tf].)
932 * hppa.h (xmpyu): No floating point format specifier for the
935 Fri Feb 4 23:36:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
937 * ppc.h (PPC_OPERAND_NEXT): Define.
938 (PPC_OPERAND_NEGATIVE): Change value to make room for above.
939 (struct powerpc_macro): Define.
940 (powerpc_macros, powerpc_num_macros): Declare.
942 Fri Jan 21 19:13:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
944 * ppc.h: New file. Header file for PowerPC opcode table.
946 Mon Jan 17 00:14:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
948 * hppa.h: More minor template fixes for sfu and copr (to allow
949 for easier disassembly).
951 * hppa.h: Fix templates for all the sfu and copr instructions.
953 Wed Dec 15 15:12:42 1993 Ken Raeburn (raeburn@cujo.cygnus.com)
955 * i386.h (push): Permit Imm16 operand too.
957 Sat Dec 11 16:14:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
959 * h8300.h (andc): Exists in base arch.
961 Wed Dec 1 12:15:32 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
963 * From Hisashi MINAMINO <minamino@sramhc.sra.co.jp>
964 * hppa.h: #undef NONE to avoid conflict with hiux include files.
966 Sun Nov 21 22:06:57 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
968 * hppa.h: Add FP quadword store instructions.
970 Wed Nov 17 17:13:16 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
972 * mips.h: (M_J_A): Added.
975 Mon Nov 8 12:12:47 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
977 * mips.h (OP_MASK_CACHE, OP_SH_CACHE): Define. From Ted Lemon
978 <mellon@pepper.ncd.com>.
980 Sun Nov 7 00:30:11 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
982 * hppa.h: Immediate field in probei instructions is unsigned,
983 not low-sign extended.
985 Wed Nov 3 10:30:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
987 * m88k.h (RRI10MASK): Change from 0xfc00ffe0 to 0xfc00fc00.
989 Tue Nov 2 12:41:30 1993 Ken Raeburn (raeburn@rover.cygnus.com)
991 * i386.h: Add "fxch" without operand.
993 Mon Nov 1 18:13:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
995 * mips.h (M_JAL_1, M_JAL_2, M_JAL_A): Added.
997 Sat Oct 2 22:26:11 1993 Jeffrey A Law (law@snake.cs.utah.edu)
999 * hppa.h: Add gfw and gfr to the opcode table.
1001 Wed Sep 29 16:23:00 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1003 * m88k.h: extended to handle m88110.
1005 Tue Sep 28 19:19:08 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1007 * hppa.h (be, ble): Use operand type 'z' to denote absolute branch
1010 Tue Sep 14 14:04:35 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1012 * i960.h (i960_opcodes): Properly bracket initializers.
1014 Mon Sep 13 12:50:52 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1016 * m88k.h (BOFLAG): rewrite to avoid nested comment.
1018 Mon Sep 13 15:46:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1020 * m68k.h (two): Protect second argument with parentheses.
1022 Fri Sep 10 16:29:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1024 * i386.h (i386_optab): Added new instruction "rsm" (for i386sl).
1025 Deleted old in/out instructions in "#if 0" section.
1027 Thu Sep 9 17:42:19 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1029 * i386.h (i386_optab): Properly bracket initializers.
1031 Wed Aug 25 13:50:56 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1033 * hppa.h (pa_opcode): Use '|' for movb and movib insns. (From
1034 Jeff Law, law@cs.utah.edu).
1036 Mon Aug 23 16:55:03 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1038 * i386.h (lcall): Accept Imm32 operand also.
1040 Mon Aug 23 12:43:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1042 * mips.h (M_ABSU): Removed (absolute value of unsigned number??).
1045 Thu Aug 19 15:08:37 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1047 * mips.h (INSN_*): Changed values. Removed unused definitions.
1048 Added INSN_COND_BRANCH_LIKELY, INSN_ISA2 and INSN_ISA3. Split
1049 INSN_LOAD_DELAY into INSN_LOAD_MEMORY_DELAY and
1050 INSN_LOAD_COPROC_DELAY. Split INSN_COPROC_DELAY into
1051 INSN_COPROC_MOVE_DELAY and INSN_COPROC_MEMORY_DELAY.
1052 (M_*): Added new values for r6000 and r4000 macros.
1053 (ANY_DELAY): Removed.
1055 Wed Aug 18 15:37:48 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1057 * mips.h: Added M_LI_S and M_LI_SS.
1059 Tue Aug 17 07:08:08 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1061 * h8300.h: Get some rare mov.bs correct.
1063 Thu Aug 5 09:15:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1065 * sparc.h: Don't define const ourself; rely on ansidecl.h having
1068 Fri Jul 30 18:41:11 1993 John Gilmore (gnu@cygnus.com)
1070 * sparc.h (F_JSR, F_UNBR, F_CONDBR): Add new flags to mark
1071 jump instructions, for use in disassemblers.
1073 Thu Jul 22 07:25:27 1993 Ian Lance Taylor (ian@cygnus.com)
1075 * m88k.h: Make bitfields just unsigned, not unsigned long or
1078 Wed Jul 21 11:55:31 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1080 * hppa.h: New argument type 'y'. Use in various float instructions.
1082 Mon Jul 19 17:17:03 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1084 * hppa.h (break): First immediate field is unsigned.
1086 * hppa.h: Add rfir instruction.
1088 Sun Jul 18 16:28:08 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1090 * mips.h: Split the actual table out into ../../opcodes/mips-opc.c.
1092 Fri Jul 16 09:59:29 1993 Ian Lance Taylor (ian@cygnus.com)
1094 * mips.h: Reworked the hazard information somewhat, and fixed some
1095 bugs in the instruction hazard descriptions.
1097 Thu Jul 15 12:42:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1099 * m88k.h: Corrected a couple of opcodes.
1101 Tue Jul 6 15:17:35 1993 Ian Lance Taylor (ian@cygnus.com)
1103 * mips.h: Replaced with version from Ralph Campbell and OSF. The
1104 new version includes instruction hazard information, but is
1105 otherwise reasonably similar.
1107 Thu Jul 1 20:36:17 1993 Doug Evans (dje@canuck.cygnus.com)
1109 * h8300.h: Fix typo in UNOP3 (affected sh[al][lr].l).
1111 Fri Jun 11 18:38:44 1993 Ken Raeburn (raeburn@cygnus.com)
1113 Patches from Jeff Law, law@cs.utah.edu:
1114 * hppa.h: Clean up some of the OLD_TABLE, non-OLD_TABLE braindamage.
1115 Make the tables be the same for the following instructions:
1116 "bb", "addb[tf]", "addib[tf]", "add", "add[loc]", "addco",
1117 "sh[123]add", "sh[123]add[lo]", "sub", "sub[obt]", "sub[bt]o",
1118 "ds", "comclr", "addi", "addi[ot]", "addito", "subi", "subio",
1119 "comiclr", "fadd", "fsub", "fmpy", "fdiv", "fsqrt", "fabs",
1120 "frnd", "fcpy", "fcnvff", "fcnvxf", "fcnvfx", "fcnvfxt",
1121 "fcmp", and "ftest".
1123 * hppa.h: Make new and old tables the same for "break", "mtctl",
1124 "mfctl", "bb", "ssm", "rsm", "xmpyu", "fmpyadd", "fmpysub".
1125 Fix typo in last patch. Collapse several #ifdefs into a
1128 * hppa.h: Delete remaining OLD_TABLE code. Bring some
1129 of the comments up-to-date.
1131 * hppa.h: Update "free list" of letters and update
1132 comments describing each letter's function.
1134 Fri Jun 4 15:41:37 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1136 * h8300.h: checkpoint, includes H8/300-H opcodes.
1138 Thu Jun 3 15:42:59 1993 Stu Grossman (grossman@cygnus.com)
1140 * Patches from Jeffrey Law <law@cs.utah.edu>.
1141 * hppa.h: Rework single precision FP
1142 instructions so that they correctly disassemble code
1145 Thu May 27 19:21:22 1993 Bruce Bauman (boot@osf.org)
1147 * i386.h (i386_optab, mov pattern): Remove Mem16 restriction from
1148 mov to allow instructions like mov ss,xyz(ecx) to assemble.
1150 Tue May 25 00:39:40 1993 Ken Raeburn (raeburn@cygnus.com)
1152 * hppa.h: Use new version from Utah if OLD_TABLE isn't defined;
1153 gdb will define it for now.
1155 Mon May 24 15:20:06 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1157 * sparc.h: Don't end enumerator list with comma.
1159 Fri May 14 15:15:50 1993 Ian Lance Taylor (ian@cygnus.com)
1161 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1162 * mips.h (OP_MASK_COPZ, OP_SH_COPZ): Define.
1163 ("bc2t"): Correct typo.
1164 ("[ls]wc[023]"): Use T rather than t.
1165 ("c[0123]"): Define general coprocessor instructions.
1167 Mon May 10 06:02:25 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1169 * m68k.h: Move split point for gcc compilation more towards
1172 Fri Apr 9 13:26:16 1993 Jim Kingdon (kingdon@cygnus.com)
1174 * rs6k.h: Clean up instructions for primary opcode 19 (many were
1175 simply wrong, ics, rfi, & rfsvc were missing).
1176 Add "a" to opr_ext for "bb". Doc fix.
1178 Thu Mar 18 13:45:31 1993 Per Bothner (bothner@rtl.cygnus.com)
1180 * i386.h: 486 extensions from John Hassey (hassey@dg-rtp.dg.com).
1181 * mips.h: Add casts, to suppress warnings about shifting too much.
1182 * m68k.h: Document the placement code '9'.
1184 Thu Feb 18 02:03:14 1993 John Gilmore (gnu@cygnus.com)
1186 * m68k.h (BREAK_UP_BIG_DECL, AND_OTHER_PART): Add kludge which
1187 allows callers to break up the large initialized struct full of
1188 opcodes into two half-sized ones. This permits GCC to compile
1189 this module, since it takes exponential space for initializers.
1190 (numopcodes, endop): Revise to use AND_OTHER_PART in size calcs.
1192 Thu Feb 4 02:06:56 1993 John Gilmore (gnu@cygnus.com)
1194 * a29k.h: Remove RCS crud, update GPL to v2, update copyrights.
1195 * convex.h: Added, from GDB's convx-opcode.h. Added CONST to all
1196 initialized structs in it.
1198 Thu Jan 28 21:32:22 1993 John Gilmore (gnu@cygnus.com)
1200 Delta 88 changes inspired by Carl Greco, <cgreco@Creighton.Edu>:
1201 * m88k.h (PMEM): Avoid previous definition from <sys/param.h>.
1202 (AND): Change to AND_ to avoid ansidecl.h `AND' conflict.
1204 Sat Jan 23 18:10:49 PST 1993 Ralph Campbell (ralphc@pyramid.com)
1206 * mips.h: document "i" and "j" operands correctly.
1208 Thu Jan 7 15:58:13 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1210 * mips.h: Removed endianness dependency.
1212 Sun Jan 3 14:13:35 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1214 * h8300.h: include info on number of cycles per instruction.
1216 Mon Dec 21 21:29:08 1992 Stu Grossman (grossman at cygnus.com)
1218 * hppa.h: Move handy aliases to the front. Fix masks for extract
1219 and deposit instructions.
1221 Sat Dec 12 16:09:48 1992 Ian Lance Taylor (ian@cygnus.com)
1223 * i386.h: accept shld and shrd both with and without the shift
1224 count argument, which is always %cl.
1226 Fri Nov 27 17:13:18 1992 Ken Raeburn (raeburn at cygnus.com)
1228 * i386.h (i386_optab_end, i386_regtab_end): Now const.
1229 (one_byte_segment_defaults, two_byte_segment_defaults,
1230 i386_prefixtab_end): Ditto.
1232 Mon Nov 23 10:47:25 1992 Ken Raeburn (raeburn@cygnus.com)
1234 * vax.h (bb*): Use "v" (bitfield type), not "a" (address operand)
1235 for operand 2; from John Carr, jfc@dsg.dec.com.
1237 Wed Nov 4 07:36:49 1992 Ken Raeburn (raeburn@cygnus.com)
1239 * m68k.h: Define FIXED_SIZE_BRANCH, so bsr and bra instructions
1240 always use 16-bit offsets. Makes calculated-size jump tables
1243 Fri Oct 16 22:52:43 1992 Ken Raeburn (raeburn@cygnus.com)
1245 * i386.h: Fix one-operand forms of in* and out* patterns.
1247 Tue Sep 22 14:08:14 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1249 * m68k.h: Added CPU32 support.
1251 Tue Sep 22 00:38:41 1992 John Gilmore (gnu@cygnus.com)
1253 * mips.h (break): Disassemble the argument. Patch from
1254 jonathan@cs.stanford.edu (Jonathan Stone).
1256 Wed Sep 9 11:25:28 1992 Ian Lance Taylor (ian@cygnus.com)
1258 * m68k.h: merged Motorola and MIT syntax.
1260 Thu Sep 3 09:33:22 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1262 * m68k.h (pmove): make the tests less strict, the 68k book is
1265 Tue Aug 25 23:25:19 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1267 * m68k.h (m68ec030): Defined as alias for 68030.
1268 (m68k_opcodes): New type characters "3" for 68030 MMU regs and "t"
1269 for immediate 0-7 added. Set up some opcodes (ptest, bkpt) to use
1270 them. Tightened description of "fmovex" to distinguish it from
1271 some "pmove" encodings. Added "pmove" for 68030 MMU regs, cleaned
1272 up descriptions that claimed versions were available for chips not
1273 supporting them. Added "pmovefd".
1275 Mon Aug 24 12:04:51 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1277 * m68k.h: fix where the . goes in divull
1279 Wed Aug 19 11:22:24 1992 Ian Lance Taylor (ian@cygnus.com)
1281 * m68k.h: the cas2 instruction is supposed to be written with
1282 indirection on the last two operands, which can be either data or
1283 address registers. Added a new operand type 'r' which accepts
1284 either register type. Added new cases for cas2l and cas2w which
1285 use them. Corrected masks for cas2 which failed to recognize use
1286 of address register.
1288 Fri Aug 14 14:20:38 1992 Per Bothner (bothner@cygnus.com)
1290 * m68k.h: Merged in patches (mostly m68040-specific) from
1291 Colin Smith <colin@wrs.com>.
1293 * m68k.h: Merged m68kmri.h and m68k.h (using the former as a
1294 base). Also cleaned up duplicates, re-ordered instructions for
1295 the sake of dis-assembling (so aliases come after standard names).
1296 * m68kmri.h: Now just defines some macros, and #includes m68k.h.
1298 Wed Aug 12 16:38:15 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1300 * m68kmri.h: added various opcodes. Moved jbxx to bxxes. Filled in
1303 Mon Aug 10 23:22:33 1992 Ken Raeburn (raeburn@cygnus.com)
1305 * sparc.h: Moved tables to BFD library.
1307 * i386.h (i386_optab): Add fildq, fistpq aliases used by gcc.
1309 Sun Jun 28 13:29:03 1992 Fred Fish (fnf@cygnus.com)
1311 * h8300.h: Finish filling in all the holes in the opcode table,
1312 so that the Lucid C compiler can digest this as well...
1314 Fri Jun 26 21:27:17 1992 John Gilmore (gnu at cygnus.com)
1316 * i386.h: Add setc, setnc, addr16, data16, repz, repnz aliases.
1317 Fix opcodes on various sizes of fild/fist instructions
1318 (16bit=no suffix, 32bit="l" suffix, 64bit="ll" suffix).
1319 Use tabs to indent for comments. Fixes suggested by Minh Tran-Le.
1321 Thu Jun 25 16:13:26 1992 Stu Grossman (grossman at cygnus.com)
1323 * h8300.h: Fill in all the holes in the opcode table so that the
1324 losing HPUX C compiler can digest this...
1326 Thu Jun 11 12:15:25 1992 John Gilmore (gnu at cygnus.com)
1328 * mips.h: Fix decoding of coprocessor instructions, somewhat.
1329 (Fix by Eric Anderson, 3jean@maas-neotek.arc.nasa.gov.)
1331 Thu May 28 11:17:44 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
1333 * sparc.h: Add new architecture variant sparclite; add its scan
1334 and divscc opcodes. Define ARCHITECTURES_CONFLICT_P macro.
1336 Tue May 5 14:23:27 1992 Per Bothner (bothner@rtl.cygnus.com)
1338 * mips.h: Add some more opcode synonyms (from Frank Yellin,
1341 Thu Apr 16 18:25:26 1992 Per Bothner (bothner@cygnus.com)
1343 * rs6k.h: New version from IBM (Metin).
1345 Thu Apr 9 00:31:19 1992 Per Bothner (bothner@rtl.cygnus.com)
1347 * rs6k.h: Fix incorrect extended opcode for instructions `fm'
1348 and `fd'. (From metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik).)
1350 Tue Apr 7 13:38:47 1992 Stu Grossman (grossman at cygnus.com)
1352 * rs6k.h: Move from ../../gdb/rs6k-opcode.h.
1354 Fri Apr 3 11:30:20 1992 Fred Fish (fnf@cygnus.com)
1356 * m68k.h (one, two): Cast macro args to unsigned to suppress
1357 complaints from compiler and lint about integer overflow during
1360 Sun Mar 29 12:22:08 1992 John Gilmore (gnu at cygnus.com)
1362 * sparc.h (OP): Avoid signed overflow when shifting to high order bit.
1364 Fri Mar 6 00:22:38 1992 John Gilmore (gnu at cygnus.com)
1366 * mips.h: Make bitfield layout depend on the HOST compiler,
1367 not on the TARGET system.
1369 Fri Feb 21 01:29:51 1992 K. Richard Pixley (rich@cygnus.com)
1371 * i386.h: added inb, inw, outb, outw opcodes, added att syntax for
1372 scmp, slod, smov, ssca, ssto. Curtesy Minh Tran-Le
1373 <TRANLE@INTELLICORP.COM>.
1375 Thu Jan 30 07:31:44 1992 Steve Chamberlain (sac at rtl.cygnus.com)
1377 * h8300.h: turned op_type enum into #define list
1379 Thu Jan 30 01:07:24 1992 John Gilmore (gnu at cygnus.com)
1381 * sparc.h: Remove "cypress" architecture. Remove "fitox" and
1382 similar instructions -- they've been renamed to "fitoq", etc.
1383 REALLY fix tsubcctv. Fix "fcmpeq" and "fcmpq" which had wrong
1384 number of arguments.
1385 * h8300.h: Remove extra ; which produces compiler warning.
1387 Tue Jan 28 22:59:22 1992 Stu Grossman (grossman at cygnus.com)
1389 * sparc.h: fix opcode for tsubcctv.
1391 Tue Jan 7 17:19:39 1992 K. Richard Pixley (rich at cygnus.com)
1393 * sparc.h: fba and cba are now aliases for fb and cb respectively.
1395 Fri Dec 27 10:55:50 1991 Per Bothner (bothner at cygnus.com)
1397 * sparc.h (nop): Made the 'lose' field be even tighter,
1398 so only a standard 'nop' is disassembled as a nop.
1400 Sun Dec 22 12:18:18 1991 Michael Tiemann (tiemann at cygnus.com)
1402 * sparc.h (nop): Add RD_GO to `lose' so that only %g0 in dest is
1403 disassembled as a nop.
1405 Tue Dec 10 00:22:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
1407 * sparc.h: fix a typo.
1409 Sat Nov 30 20:40:51 1991 Steve Chamberlain (sac at rtl.cygnus.com)
1411 * a29k.h, arm.h, h8300.h, i386.h, i860.h, i960.h , m68k.h,
1412 m88k.h, mips.h , np1.h, ns32k.h, pn.h, pyr.h, sparc.h, tahoe.h,
1413 vax.h, ChangeLog: renamed from ../<foo>-opcode.h
1417 version-control: never