2 Tue Feb 18 17:37:20 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
8 Fri Feb 14 13:16:15 1997 Fred Fish <fnf@cygnus.com>
10 * tic80.h (PDS_NAME): Macro to access name field of predefined symbols.
11 (PDS_VALUE): Macro to access value field of predefined symbols.
12 (tic80_next_predefined_symbol): Add prototype.
16 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
22 Mon Feb 10 10:32:17 1997 Fred Fish <fnf@cygnus.com>
24 * tic80.h (tic80_symbol_to_value): Change prototype to match
25 change in function, added class parameter.
27 Thu Feb 6 17:30:15 1997 Fred Fish <fnf@cygnus.com>
29 * tic80.h (TIC80_OPERAND_ENDMASK): Add for flagging TIc80
30 endmask fields, which are somewhat weird in that 0 and 32 are
31 treated exactly the same.
33 Thu Jan 30 13:46:18 1997 Fred Fish <fnf@cygnus.com>
35 * tic80.h: Change all the OPERAND defines to use the form (1 << X)
36 rather than a constant that is 2**X. Reorder them to put bits for
37 operands that have symbolic names in the upper bits, so they can
38 be packed into an int where the lower bits contain the value that
39 corresponds to that symbolic name.
40 (predefined_symbo): Add struct.
41 (tic80_predefined_symbols): Declare array of translations.
42 (tic80_num_predefined_symbols): Declare size of that array.
43 (tic80_value_to_symbol): Declare function.
44 (tic80_symbol_to_value): Declare function.
47 Wed Jan 29 09:37:25 1997 Jeffrey A Law (law@cygnus.com)
49 * mn10200.h (MN10200_OPERAND_RELAX): Define.
52 Sat Jan 18 15:18:59 1997 Fred Fish <fnf@cygnus.com>
54 * tic80.h (TIC80_NO_R0_DEST): Add for opcodes where r0 cannot
55 be the destination register.
57 Thu Jan 16 20:48:55 1997 Fred Fish <fnf@cygnus.com>
59 * tic80.h (struct tic80_opcode): Change "format" field to "flags".
60 (FMT_UNUSED, FMT_SI, FMT_LI, FMT_REG): Delete.
61 (TIC80_VECTOR): Define a flag bit for the flags. This one means
62 that the opcode can have two vector instructions in a single
63 32 bit word and we have to encode/decode both.
65 Tue Jan 14 19:37:09 1997 Fred Fish <fnf@cygnus.com>
67 * tic80.h (TIC80_OPERAND_PCREL): Renamed from
68 TIC80_OPERAND_RELATIVE for PC relative.
69 (TIC80_OPERAND_BASEREL): New flag bit for register
72 Mon Jan 13 15:56:38 1997 Fred Fish <fnf@cygnus.com>
74 * tic80.h (TIC80_OPERAND_FLOAT): Add for floating point operands.
76 Mon Jan 6 10:51:15 1997 Fred Fish <fnf@cygnus.com>
78 * tic80.h (TIC80_OPERAND_SCALED): Operand may have optional
79 ":s" modifier for scaling.
81 Sun Jan 5 12:12:19 1997 Fred Fish <fnf@cygnus.com>
83 * tic80.h (TIC80_OPERAND_M_SI): Add operand modifier for ":m".
84 (TIC80_OPERAND_M_LI): Ditto
86 Sat Jan 4 19:02:44 1997 Fred Fish <fnf@cygnus.com>
88 * tic80.h (TIC80_OPERAND_BITNUM): Renamed from TIC80_OPERAND_CC_SZ.
89 (TIC80_OPERAND_CC): New define for condition code operand.
90 (TIC80_OPERAND_CR): New define for control register operand.
92 Fri Jan 3 16:22:23 1997 Fred Fish <fnf@cygnus.com>
94 * tic80.h (struct tic80_opcode): Name changed.
95 (struct tic80_opcode): Remove format field.
96 (struct tic80_operand): Add insertion and extraction functions.
97 (TIC80_OPERAND_*): Remove old bogus values, start adding new
103 Tue Dec 31 15:05:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
105 * v850.h (V850_OPERAND_ADJUST_SHORT_MEMORY): New flag to adjust
106 type IV instruction offsets.
110 Fri Dec 27 22:23:10 1996 Fred Fish <fnf@cygnus.com>
115 Wed Dec 18 10:06:31 1996 Jeffrey A Law (law@cygnus.com)
117 * mn10200.h (MN10200_OPERAND_NOCHECK): Define.
119 Sat Dec 14 10:48:31 1996 Fred Fish <fnf@ninemoons.com>
121 * mn10200.h: Fix comment, mn10200_operand not powerpc_operand.
122 * mn10300.h: Fix comment, mn10300_operand not powerpc_operand.
124 * v850.h: Fix comment, v850_operand not powerpc_operand.
127 Mon Dec 9 16:45:39 1996 Jeffrey A Law (law@cygnus.com)
129 * mn10200.h: Flesh out structures and definitions needed by
130 the mn10200 assembler & disassembler.
132 Tue Nov 26 10:46:56 1996 Ian Lance Taylor <ian@cygnus.com>
134 * mips.h: Add mips16 definitions.
136 Mon Nov 25 17:56:54 1996 J.T. Conklin <jtc@cygnus.com>
138 * m68k.h: Document new <, >, m, n, o and p operand specifiers.
140 Wed Nov 20 10:59:41 1996 Jeffrey A Law (law@cygnus.com)
142 * mn10300.h (MN10300_OPERAND_PCREL): Define.
143 (MN10300_OPERAND_MEMADDR): Define.
145 Tue Nov 19 13:30:40 1996 Jeffrey A Law (law@cygnus.com)
147 * mn10300.h (MN10300_OPERAND_REG_LIST): Define.
149 Wed Nov 6 13:41:08 1996 Jeffrey A Law (law@cygnus.com)
151 * mn10300.h (MN10300_OPERAND_SPLIT): Define.
153 Tue Nov 5 13:26:12 1996 Jeffrey A Law (law@cygnus.com)
155 * mn10300.h (MN10300_OPERAND_EXTENDED): Define.
157 Mon Nov 4 12:52:48 1996 Jeffrey A Law (law@cygnus.com)
159 * mn10300.h (MN10300_OPERAND_REPEATED): Define.
161 Fri Nov 1 10:31:02 1996 Richard Henderson <rth@tamu.edu>
163 * alpha.h: Don't include "bfd.h"; private relocation types are now
164 negative to minimize problems with shared libraries. Organize
165 instruction subsets by AMASK extensions and PALcode
167 (struct alpha_operand): Move flags slot for better packing.
170 Tue Oct 29 12:19:10 1996 Jeffrey A Law (law@cygnus.com)
172 * v850.h (V850_OPERAND_RELAX): New operand flag.
175 Thu Oct 10 14:29:11 1996 Jeffrey A Law (law@cygnus.com)
177 * mn10300.h (FMT_*): Move operand format definitions
180 Tue Oct 8 14:48:07 1996 Jeffrey A Law (law@cygnus.com)
182 * mn10300.h (MN10300_OPERAND_PAREN): Define.
184 Mon Oct 7 16:52:11 1996 Jeffrey A Law (law@cygnus.com)
186 * mn10300.h (mn10300_opcode): Add "format" field.
187 (MN10300_OPERAND_*): Define.
189 Thu Oct 3 10:33:46 1996 Jeffrey A Law (law@cygnus.com)
192 * mn10200.h, mn10300.h: New files.
194 Wed Oct 2 21:31:26 1996 Jeffrey A Law (law@cygnus.com)
196 * mn10x00.h: New file.
199 Fri Sep 27 18:26:46 1996 Stu Grossman (grossman@critters.cygnus.com)
201 * v850.h: Add new flag to indicate this instruction uses a PC
205 Fri Sep 13 14:58:13 1996 Jeffrey A Law (law@cygnus.com)
207 * h8300.h (stmac): Add missing instruction.
210 Sat Aug 31 16:02:03 1996 Jeffrey A Law (law@cygnus.com)
212 * v850.h (v850_opcode): Remove "size" field. Add "memop"
215 Fri Aug 23 10:39:08 1996 Jeffrey A Law (law@cygnus.com)
217 * v850.h (V850_OPERAND_EP): Define.
219 * v850.h (v850_opcode): Add size field.
221 Thu Aug 22 16:51:25 1996 J.T. Conklin <jtc@rtl.cygnus.com>
223 * v850.h (v850_operands): Add insert and extract fields, pointers
224 to functions used to handle unusual operand encoding.
225 (V850_OPERAND_REG, V850_OPERAND_SRG, V850_OPERAND_CC,
226 V850_OPERAND_SIGNED): Defined.
228 Wed Aug 21 17:45:10 1996 J.T. Conklin <jtc@rtl.cygnus.com>
230 * v850.h (v850_operands): Add flags field.
231 (OPERAND_REG, OPERAND_NUM): Defined.
233 Tue Aug 20 14:52:02 1996 J.T. Conklin <jtc@rtl.cygnus.com>
238 Fri Aug 16 14:44:15 1996 James G. Smith <jsmith@cygnus.co.uk>
240 * mips.h (OP_SH_LOCC, OP_SH_HICC, OP_MASK_CC, OP_SH_COP1NORM,
241 OP_MASK_COP1NORM, OP_SH_COP1SPEC, OP_MASK_COP1SPEC,
242 OP_MASK_COP1SCLR, OP_MASK_COP1CMP, OP_SH_COP1CMP, OP_SH_FORMAT,
243 OP_MASK_FORMAT, OP_SH_TRUE, OP_MASK_TRUE, OP_SH_GE, OP_MASK_GE,
244 OP_SH_UNSIGNED, OP_MASK_UNSIGNED, OP_SH_HINT, OP_MASK_HINT):
247 Fri Aug 16 00:15:15 1996 Jeffrey A Law (law@cygnus.com)
249 * hppa.h (pitlb, pitlbe, iitlba, iitlbp, fic, fice): Accept
250 a 3 bit space id instead of a 2 bit space id.
252 Thu Aug 15 13:11:46 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
254 * d10v.h: Add some additional defines to support the
255 assembler in determining which operations can be done in parallel.
257 Tue Aug 6 11:13:22 1996 Jeffrey A Law (law@cygnus.com)
259 * h8300.h (SN): Define.
260 (eepmov.b): Renamed from "eepmov"
261 (nop, bpt, rte, rts, sleep, clrmac): These have no size associated
264 Fri Jul 26 11:47:10 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
266 * d10v.h (OPERAND_SHIFT): New operand flag.
268 Thu Jul 25 12:06:22 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
270 * d10v.h: Changes for divs, parallel-only instructions, and
273 Mon Jul 22 11:21:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
275 * d10v.h (pd_reg): Define. Putting the definition here allows
276 the assembler and disassembler to share the same struct.
278 Mon Jul 22 12:15:25 1996 Ian Lance Taylor <ian@cygnus.com>
280 * i960.h (i960_opcodes): "halt" takes an argument. From Stephen
281 Williams <steve@icarus.com>.
283 Wed Jul 17 14:46:38 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
287 Thu Jul 11 12:09:15 1996 Jeffrey A Law (law@cygnus.com)
289 * h8300.h (band, bclr): Force high bit of immediate nibble to zero.
291 Wed Jul 3 14:30:12 1996 J.T. Conklin <jtc@rtl.cygnus.com>
293 * m68k.h (mcf5200): New macro.
294 Document names of coldfire control registers.
296 Tue Jul 2 23:05:45 1996 Jeffrey A Law (law@cygnus.com)
298 * h8300.h (SRC_IN_DST): Define.
300 * h8300.h (UNOP3): Mark the register operand in this insn
301 as a source operand, not a destination operand.
302 (SHIFT_2, SHIFT_IMM): Remove. Eliminate all references.
303 (UNOP3): Change SHIFT_IMM to IMM for H8/S bitops. Mark
304 register operand with SRC_IN_DST.
306 Fri Jun 21 13:52:17 1996 Richard Henderson <rth@tamu.edu>
310 Thu Jun 20 15:02:57 1996 Ian Lance Taylor <ian@cygnus.com>
312 * rs6k.h: Remove obsolete file.
314 Wed Jun 19 15:29:38 1996 Ian Lance Taylor <ian@cygnus.com>
316 * i386.h: Correct opcode values for faddp, fsubp, fsubrp, fmulp,
317 fdivp, and fdivrp. Add ffreep.
319 Tue Jun 18 16:06:00 1996 Jeffrey A. Law <law@rtl.cygnus.com>
321 * h8300.h: Reorder various #defines for readability.
322 (ABS32SRC, ABS32DST, DSP32LIST, ABS32LIST, A32LIST): Define.
323 (BITOP): Accept additional (unused) argument. All callers changed.
326 (ldc, stc, movb, movw, movl): Use 32bit offsets and absolutes.
328 * h8300.h (EXR, SHIFT_2, MACREG, SHIFT_IMM, RDINC): Define.
329 (O_TAS, O_CLRMAC, O_LDMAC, O_MAC, O_LDM, O_STM): Define.
330 (BITOP, EBITOP): Handle new H8/S addressing modes for
332 (UNOP3): Handle new shift/rotate insns on the H8/S.
333 (insns using exr): New instructions.
334 (tas, mac, ldmac, clrmac, ldm, stm): New instructions.
336 Thu May 23 16:56:48 1996 Jeffrey A Law (law@cygnus.com)
338 * h8300.h (add.l): Undo Apr 5th change. The manual I had
341 Mon May 6 23:38:22 1996 Jeffrey A Law (law@cygnus.com)
343 * h8300.h (START): Remove.
344 (MEMRELAX): Define. Mark absolute memory operands in mov.b, mov.w
345 and mov.l insns that can be relaxed.
347 Tue Apr 30 18:30:58 1996 Ian Lance Taylor <ian@cygnus.com>
349 * i386.h: Remove Abs32 from lcall.
351 Mon Apr 22 17:09:23 1996 Doug Evans <dje@blues.cygnus.com>
353 * sparc.h (SPARC_OPCODE_ARCH_V9_P): New macro.
355 Mark X,Y opcode letters as in use.
357 Thu Apr 11 17:28:18 1996 Ian Lance Taylor <ian@cygnus.com>
359 * sparc.h (F_FLOAT, F_FBR): Define.
361 Fri Apr 5 16:55:34 1996 Jeffrey A Law (law@cygnus.com)
363 * h8300.h (ABS8MEM): Renamed from ABSMOV. Remove ABSMOV
365 (ABS8SRC,ABS8DST): Add ABS8MEM.
366 (add.l): Fix reg+reg variant.
367 (eepmov.w): Renamed from eepmovw.
368 (ldc,stc): Fix many cases.
370 Sun Mar 31 13:30:03 1996 Doug Evans <dje@canuck.cygnus.com>
372 * sparc.h (SPARC_OPCODE_ARCH_MASK): New macro.
374 Thu Mar 7 15:08:23 1996 Doug Evans <dje@charmed.cygnus.com>
376 * sparc.h (O): Mark operand letter as in use.
378 Tue Feb 20 20:46:21 1996 Doug Evans <dje@charmed.cygnus.com>
380 * sparc.h (sparc_{encode,decode}_sparclet_cpreg): Declare.
381 Mark operand letters uU as in use.
383 Mon Feb 19 01:59:08 1996 Doug Evans <dje@charmed.cygnus.com>
385 * sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_SPARCLET.
386 (sparc_opcode_arch): Delete member `conflicts'. Add `supported'.
387 (SPARC_OPCODE_SUPPORTED): New macro.
388 (SPARC_OPCODE_CONFLICT_P): Rewrite.
391 Fri Feb 16 12:23:34 1996 Jeffrey A Law (law@cygnus.com)
393 * sparc.h (sparc_opcode_lookup_arch) Make return type in
394 declaration consistent with return type in definition.
396 Wed Feb 14 18:14:11 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
398 * i386.h (i386_optab): Remove Data32 from pushf and popf.
400 Thu Feb 8 14:27:21 1996 James Carlson <carlson@xylogics.com>
402 * i386.h (i386_regtab): Add 80486 test registers.
404 Mon Feb 5 18:35:46 1996 Ian Lance Taylor <ian@cygnus.com>
406 * i960.h (I_HX): Define.
407 (i960_opcodes): Add HX instruction.
409 Mon Jan 29 12:43:39 1996 Ken Raeburn <raeburn@cygnus.com>
411 * i386.h: Fix waiting forms of finit, fstenv, fsave, fstsw, fstcw,
414 Wed Jan 24 22:36:59 1996 Doug Evans <dje@charmed.cygnus.com>
416 * sparc.h (enum sparc_opcode_arch_val): Replaces sparc_architecture.
417 (SPARC_OPCODE_CONFLICT_P): Renamed from ARCHITECTURES_CONFLICT_P.
418 (bfd_* defines): Delete.
419 (sparc_opcode_archs): Replaces architecture_pname.
420 (sparc_opcode_lookup_arch): Declare.
421 (NUMOPCODES): Delete.
423 Mon Jan 22 08:24:32 1996 Doug Evans <dje@charmed.cygnus.com>
425 * sparc.h (enum sparc_architecture): Add v9a.
426 (ARCHITECTURES_CONFLICT_P): Update.
428 Thu Dec 28 13:27:53 1995 John Hassey <hassey@rtp.dg.com>
430 * i386.h: Added Pentium Pro instructions.
432 Thu Nov 2 22:59:22 1995 Ian Lance Taylor <ian@cygnus.com>
434 * m68k.h: Document new 'W' operand place.
436 Tue Oct 24 10:49:10 1995 Jeffrey A Law (law@cygnus.com)
438 * hppa.h: Add lci and syncdma instructions.
440 Mon Oct 23 11:09:16 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
442 * mips.h: Added INSN_4100 flag to mark NEC VR4100 specific
445 Mon Oct 16 10:28:15 1995 Michael Meissner <meissner@tiktok.cygnus.com>
447 * ppc.h (PPC_OPCODE_{COMMON,ANY}): New opcode flags for
448 assembler's -mcom and -many switches.
450 Wed Oct 11 16:56:33 1995 Ken Raeburn <raeburn@cygnus.com>
452 * i386.h: Fix cmpxchg8b extension opcode description.
454 Thu Oct 5 18:03:36 1995 Ken Raeburn <raeburn@cygnus.com>
456 * i386.h: Add Pentium instructions wrmsr, rdtsc, rdmsr, cmpxchg8b,
459 Tue Sep 19 15:26:43 1995 Ian Lance Taylor <ian@cygnus.com>
461 * m68k.h: Change comment: split type P into types 0, 1 and 2.
463 Wed Aug 30 13:50:55 1995 Doug Evans <dje@canuck.cygnus.com>
465 * sparc.h (sparc_{encode,decode}_prefetch): Declare.
467 Tue Aug 29 15:34:58 1995 Doug Evans <dje@canuck.cygnus.com>
469 * sparc.h (sparc_{encode,decode}_{asi,membar}): Declare.
471 Wed Aug 2 18:32:19 1995 Ian Lance Taylor <ian@cygnus.com>
475 * m68k.h: Move tables into opcodes/m68k-opc.c, leaving just the
476 declarations. Remove F_ALIAS and flag field of struct
477 m68k_opcode. Change arch field of struct m68k_opcode to unsigned
478 int. Make name and args fields of struct m68k_opcode const.
480 Wed Aug 2 08:16:46 1995 Doug Evans <dje@canuck.cygnus.com>
482 * sparc.h (F_NOTV9): Define.
484 Tue Jul 11 14:20:42 1995 Jeff Spiegel <jeffs@lsil.com>
486 * mips.h (INSN_4010): Define.
488 Wed Jun 21 18:49:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
490 * m68k.h (TBL1): Reverse sense of "round" argument in result.
492 Changes from Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>:
493 * m68k.h: Fix argument descriptions of coprocessor
494 instructions to allow only alterable operands where appropriate.
495 [!NO_DEFAULT_SIZES]: An omitted size defaults to `w'.
496 (m68k_opcode_aliases): Add more aliases.
499 Sat Apr 29 23:17:03 1995 Doug Evans <dje@chestnut.cygnus.com>
501 * arc.h (struct arc_opcode): New flag value ARC_OPCODE_COND_BRANCH.
502 (ARC_DELAY_{NONE,NORMAL,JUMP): Define delay slot types.
505 Fri Apr 14 22:15:34 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
507 * m68k.h: Added explcitly short-sized conditional branches, and a
508 bunch of aliases (fmov*, ftest*, tdivul) to support gcc's
509 svr4-based configurations.
512 Wed Apr 12 08:54:32 1995 Doug Evans <dje@canuck.cygnus.com>
514 * arc.h (struct arc_opcode): New members next_asm, next_dis.
515 (ARC_HASH_OPCODE, ARC_HASH_ICODE): Define.
516 (ARC_OPCODE_NEXT_ASM, ARC_OPCODE_NEXT_DIS): Define.
517 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): Add prototypes.
519 Thu Apr 6 20:36:55 1995 Doug Evans <dje@chestnut.cygnus.com>
521 * arc.h (arc_get_opcode_mach): Define prototype.
524 Mon Mar 13 21:30:01 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
526 Mon Feb 27 08:36:39 1995 Bryan Ford <baford@cs.utah.edu>
527 * i386.h: added missing Data16/Data32 flags to a few instructions.
529 Wed Mar 8 15:19:53 1995 Ian Lance Taylor <ian@cygnus.com>
531 * mips.h (OP_MASK_FR, OP_SH_FR): Define.
532 (OP_MASK_BCC, OP_SH_BCC): Define.
533 (OP_MASK_PREFX, OP_SH_PREFX): Define.
534 (OP_MASK_CCC, OP_SH_CCC): Define.
535 (INSN_READ_FPR_R): Define.
538 Wed Mar 8 03:13:23 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
540 * m68k.h (enum m68k_architecture): Deleted.
541 (struct m68k_opcode_alias): New type.
542 (m68k_opcodes): Now const. Deleted opcode aliases with exactly
543 matching constraints, values and flags. As a side effect of this,
544 the MOTOROLA_SYNTAX_ONLY and MIT_SYNTAX_ONLY macros, which so far
545 as I know were never used, now may need re-examining.
546 (numopcodes): Now const.
547 (m68k_opcode_aliases, numaliases): New variables.
549 [DONT_DEFINE_TABLE]: Declare numopcodes, numaliases, and
550 m68k_opcode_aliases; update declaration of m68k_opcodes.
553 Tue Mar 7 21:03:26 1995 Doug Evans <dje@chestnut.cygnus.com>
555 * arc.h (ARC_MACH_BIG): Define.
556 (ARC_MACH_MASK): Update.
557 (ARC_MACH_CPU_MASK): Define.
558 (ARC_OPCODE_CPU, ARC_OPVAL_CPU, ARC_HAVE_CPU): Likewise.
561 Mon Mar 6 10:02:00 1995 Jeff Law (law@snake.cs.utah.edu)
563 * hppa.h (delay_type): Delete unused enumeration.
564 (pa_opcode): Replace unused delayed field with an architecture
566 (pa_opcodes): Mark each instruction as either PA1.0 or PA1.1.
568 Fri Mar 3 16:10:24 1995 Ian Lance Taylor <ian@cygnus.com>
570 * mips.h (INSN_ISA4): Define.
572 Fri Feb 24 19:13:37 1995 Ian Lance Taylor <ian@cygnus.com>
574 * mips.h (M_DLA_AB, M_DLI): Define.
576 Thu Feb 23 17:33:09 1995 Jeff Law (law@snake.cs.utah.edu)
578 * hppa.h (fstwx): Fix single-bit error.
580 Wed Feb 15 12:19:52 1995 Ian Lance Taylor <ian@cygnus.com>
582 * mips.h (M_ULD, M_ULD_A, M_USD, M_USD_A): Define.
585 Mon Feb 13 11:05:00 1995 Doug Evans <dje@canuck.cygnus.com>
587 * arc.h (ARC_OPERAND_LIMM): New flag.
588 (ARC_OPERAND_ADDRESS): Likewise.
590 Thu Feb 9 18:55:59 1995 Doug Evans <dje@canuck.cygnus.com>
592 * arc.h (ARC_MACH_{BASE,HOST,GRAPHICS,AUDIO}): Define.
593 (ARC_MACH_MASK, ARC_OPCODE_MACH, ARC_OPVAL_MACH): Define.
594 (ARC_HAVE_MULT_SHIFT): Delete.
595 (ARC_HAVE_MACH): Define.
596 (struct arc_opcode): New field `flags'.
597 (struct arc_operand_value): Ditto.
598 (arc_opcode_supported): New function.
599 (arc_opval_supported): Ditto.
602 Mon Feb 6 10:35:23 1995 J.T. Conklin <jtc@rtl.cygnus.com>
604 * i386.h: added cpuid instruction , and dr[0-7] aliases for the
605 debug registers. From Charles Hannum (mycroft@netbsd.org).
607 Mon Feb 6 03:31:54 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
609 Changes from Bryan Ford <baford@schirf.cs.utah.edu> for 16-bit
611 * i386.h (MOV_AX_DISP32): New macro.
612 (i386_optab): Added Data16 and Data32 as needed. Added "w" forms
613 of several call/return instructions.
614 (ADDR_PREFIX_OPCODE): New macro.
616 Mon Jan 23 16:45:43 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
618 Sat Jan 21 17:50:38 1995 Pat Rankin (rankin@eql.caltech.edu)
620 * ../include/opcode/vax.h (struct vot_wot, field `args'): make
621 it pointer to const char;
622 (struct vot, field `name'): ditto.
624 Thu Jan 19 14:47:53 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
626 * vax.h: Supply and properly group all values in end sentinel.
628 Tue Jan 17 10:55:30 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
630 * mips.h (INSN_ISA, INSN_4650): Define.
633 Mon Dec 19 12:15:52 1994 Doug Evans <dje@canuck.cygnus.com>
635 * arc.h: Misc. cleanup. Merge "modifiers" into flags field.
636 Support multiply/shift insns.
640 Tue Nov 29 17:52:41 1994 Doug Evans <dje@canuck.cygnus.com>
645 Wed Oct 19 13:34:17 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
647 * a29k.h: Add operand type 'I' for `inv' and `iretinv'. On
648 systems with a separate instruction and data cache, such as the
649 29040, these instructions take an optional argument.
651 Wed Sep 14 17:44:20 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
653 * mips.h (INSN_STORE_MEMORY): Correct value to not conflict with
656 Tue Sep 6 11:39:08 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
658 * mips.h (INSN_STORE_MEMORY): Define.
660 Thu Jul 28 19:28:07 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
662 * sparc.h: Document new operand type 'x'.
664 Tue Jul 26 17:48:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
666 * i960.h (I_CX2): New instruction category. It includes
667 instructions available on Cx and Jx processors.
668 (I_JX): New instruction category, for JX-only instructions.
669 (i960_opcodes): Put eshro and sysctl in I_CX2 category. Added
670 Jx-only instructions, in I_JX category.
672 Wed Jul 13 18:43:47 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
674 * ns32k.h (endop): Made pointer const too.
676 Sun Jul 10 11:01:09 1994 Ian Dall (dall@hfrd.dsto.gov.au)
678 * ns32k.h: Drop Q operand type as there is no correct use
679 for it. Add I and Z operand types which allow better checking.
681 Thu Jul 7 12:34:48 1994 Steve Chamberlain (sac@jonny.cygnus.com)
683 * h8300.h (xor.l) :fix bit pattern.
684 (L_2): New size of operand.
687 Fri Jun 10 16:38:11 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
689 * m68k.h: Move "trap" before "tpcc" to change disassembly.
691 Fri Jun 3 15:57:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
693 * sparc.h: Include v9 definitions.
695 Thu Jun 2 12:23:17 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
697 * m68k.h (m68060): Defined.
698 (m68040up, mfloat, mmmu): Include it.
699 (struct m68k_opcode): Widen `arch' field.
700 (m68k_opcodes): Updated for M68060. Removed comments that were
701 instructions commented out by "JF" years ago.
703 Thu Apr 28 18:31:14 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
705 * m68k.h (struct m68k_opcode): Shorten `arch' field to 8 bits, and
706 add a one-bit `flags' field.
707 (F_ALIAS): New macro.
709 Wed Apr 27 11:29:52 1994 Steve Chamberlain (sac@cygnus.com)
711 * h8300.h (dec, inc): Get encoding right.
713 Mon Apr 4 13:12:43 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
715 * ppc.h (struct powerpc_operand): Removed signedp field; just use
717 (PPC_OPERAND_SIGNED): Define.
718 (PPC_OPERAND_SIGNOPT): Define.
720 Thu Mar 31 19:34:08 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
722 * i386.h (IS_JUMP_ON_ECX_ZERO, "jcxz" pattern): Operand size
723 prefix is 0x66, not 0x67. Patch from H.J. Lu (hlu@nynexst.com).
725 Thu Mar 3 15:51:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
727 * i386.h: Reverse last change. It'll be handled in gas instead.
729 Thu Feb 24 15:29:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
731 * i386.h (sar): Disabled the two-operand Imm1 form, since it was
732 slower on the 486 and used the implicit shift count despite the
733 explicit operand. The one-operand form is still available to get
734 the shorter form with the implicit shift count.
736 Thu Feb 17 12:27:52 1994 Torbjorn Granlund (tege@mexican.cygnus.com)
738 * hppa.h: Fix typo in fstws arg string.
740 Wed Feb 9 21:23:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
742 * ppc.h (struct powerpc_opcode): Make operands field unsigned.
744 Mon Feb 7 19:14:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
746 * ppc.h (PPC_OPCODE_601): Define.
748 Fri Feb 4 23:43:50 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
750 * hppa.h (addb): Use '@' for addb and addib pseudo ops.
751 (so we can determine valid completers for both addb and addb[tf].)
753 * hppa.h (xmpyu): No floating point format specifier for the
756 Fri Feb 4 23:36:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
758 * ppc.h (PPC_OPERAND_NEXT): Define.
759 (PPC_OPERAND_NEGATIVE): Change value to make room for above.
760 (struct powerpc_macro): Define.
761 (powerpc_macros, powerpc_num_macros): Declare.
763 Fri Jan 21 19:13:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
765 * ppc.h: New file. Header file for PowerPC opcode table.
767 Mon Jan 17 00:14:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
769 * hppa.h: More minor template fixes for sfu and copr (to allow
770 for easier disassembly).
772 * hppa.h: Fix templates for all the sfu and copr instructions.
774 Wed Dec 15 15:12:42 1993 Ken Raeburn (raeburn@cujo.cygnus.com)
776 * i386.h (push): Permit Imm16 operand too.
778 Sat Dec 11 16:14:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
780 * h8300.h (andc): Exists in base arch.
782 Wed Dec 1 12:15:32 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
784 * From Hisashi MINAMINO <minamino@sramhc.sra.co.jp>
785 * hppa.h: #undef NONE to avoid conflict with hiux include files.
787 Sun Nov 21 22:06:57 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
789 * hppa.h: Add FP quadword store instructions.
791 Wed Nov 17 17:13:16 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
793 * mips.h: (M_J_A): Added.
796 Mon Nov 8 12:12:47 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
798 * mips.h (OP_MASK_CACHE, OP_SH_CACHE): Define. From Ted Lemon
799 <mellon@pepper.ncd.com>.
801 Sun Nov 7 00:30:11 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
803 * hppa.h: Immediate field in probei instructions is unsigned,
804 not low-sign extended.
806 Wed Nov 3 10:30:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
808 * m88k.h (RRI10MASK): Change from 0xfc00ffe0 to 0xfc00fc00.
810 Tue Nov 2 12:41:30 1993 Ken Raeburn (raeburn@rover.cygnus.com)
812 * i386.h: Add "fxch" without operand.
814 Mon Nov 1 18:13:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
816 * mips.h (M_JAL_1, M_JAL_2, M_JAL_A): Added.
818 Sat Oct 2 22:26:11 1993 Jeffrey A Law (law@snake.cs.utah.edu)
820 * hppa.h: Add gfw and gfr to the opcode table.
822 Wed Sep 29 16:23:00 1993 K. Richard Pixley (rich@sendai.cygnus.com)
824 * m88k.h: extended to handle m88110.
826 Tue Sep 28 19:19:08 1993 Jeffrey A Law (law@snake.cs.utah.edu)
828 * hppa.h (be, ble): Use operand type 'z' to denote absolute branch
831 Tue Sep 14 14:04:35 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
833 * i960.h (i960_opcodes): Properly bracket initializers.
835 Mon Sep 13 12:50:52 1993 K. Richard Pixley (rich@sendai.cygnus.com)
837 * m88k.h (BOFLAG): rewrite to avoid nested comment.
839 Mon Sep 13 15:46:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
841 * m68k.h (two): Protect second argument with parentheses.
843 Fri Sep 10 16:29:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
845 * i386.h (i386_optab): Added new instruction "rsm" (for i386sl).
846 Deleted old in/out instructions in "#if 0" section.
848 Thu Sep 9 17:42:19 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
850 * i386.h (i386_optab): Properly bracket initializers.
852 Wed Aug 25 13:50:56 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
854 * hppa.h (pa_opcode): Use '|' for movb and movib insns. (From
855 Jeff Law, law@cs.utah.edu).
857 Mon Aug 23 16:55:03 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
859 * i386.h (lcall): Accept Imm32 operand also.
861 Mon Aug 23 12:43:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
863 * mips.h (M_ABSU): Removed (absolute value of unsigned number??).
866 Thu Aug 19 15:08:37 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
868 * mips.h (INSN_*): Changed values. Removed unused definitions.
869 Added INSN_COND_BRANCH_LIKELY, INSN_ISA2 and INSN_ISA3. Split
870 INSN_LOAD_DELAY into INSN_LOAD_MEMORY_DELAY and
871 INSN_LOAD_COPROC_DELAY. Split INSN_COPROC_DELAY into
872 INSN_COPROC_MOVE_DELAY and INSN_COPROC_MEMORY_DELAY.
873 (M_*): Added new values for r6000 and r4000 macros.
874 (ANY_DELAY): Removed.
876 Wed Aug 18 15:37:48 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
878 * mips.h: Added M_LI_S and M_LI_SS.
880 Tue Aug 17 07:08:08 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
882 * h8300.h: Get some rare mov.bs correct.
884 Thu Aug 5 09:15:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
886 * sparc.h: Don't define const ourself; rely on ansidecl.h having
889 Fri Jul 30 18:41:11 1993 John Gilmore (gnu@cygnus.com)
891 * sparc.h (F_JSR, F_UNBR, F_CONDBR): Add new flags to mark
892 jump instructions, for use in disassemblers.
894 Thu Jul 22 07:25:27 1993 Ian Lance Taylor (ian@cygnus.com)
896 * m88k.h: Make bitfields just unsigned, not unsigned long or
899 Wed Jul 21 11:55:31 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
901 * hppa.h: New argument type 'y'. Use in various float instructions.
903 Mon Jul 19 17:17:03 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
905 * hppa.h (break): First immediate field is unsigned.
907 * hppa.h: Add rfir instruction.
909 Sun Jul 18 16:28:08 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
911 * mips.h: Split the actual table out into ../../opcodes/mips-opc.c.
913 Fri Jul 16 09:59:29 1993 Ian Lance Taylor (ian@cygnus.com)
915 * mips.h: Reworked the hazard information somewhat, and fixed some
916 bugs in the instruction hazard descriptions.
918 Thu Jul 15 12:42:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
920 * m88k.h: Corrected a couple of opcodes.
922 Tue Jul 6 15:17:35 1993 Ian Lance Taylor (ian@cygnus.com)
924 * mips.h: Replaced with version from Ralph Campbell and OSF. The
925 new version includes instruction hazard information, but is
926 otherwise reasonably similar.
928 Thu Jul 1 20:36:17 1993 Doug Evans (dje@canuck.cygnus.com)
930 * h8300.h: Fix typo in UNOP3 (affected sh[al][lr].l).
932 Fri Jun 11 18:38:44 1993 Ken Raeburn (raeburn@cygnus.com)
934 Patches from Jeff Law, law@cs.utah.edu:
935 * hppa.h: Clean up some of the OLD_TABLE, non-OLD_TABLE braindamage.
936 Make the tables be the same for the following instructions:
937 "bb", "addb[tf]", "addib[tf]", "add", "add[loc]", "addco",
938 "sh[123]add", "sh[123]add[lo]", "sub", "sub[obt]", "sub[bt]o",
939 "ds", "comclr", "addi", "addi[ot]", "addito", "subi", "subio",
940 "comiclr", "fadd", "fsub", "fmpy", "fdiv", "fsqrt", "fabs",
941 "frnd", "fcpy", "fcnvff", "fcnvxf", "fcnvfx", "fcnvfxt",
944 * hppa.h: Make new and old tables the same for "break", "mtctl",
945 "mfctl", "bb", "ssm", "rsm", "xmpyu", "fmpyadd", "fmpysub".
946 Fix typo in last patch. Collapse several #ifdefs into a
949 * hppa.h: Delete remaining OLD_TABLE code. Bring some
950 of the comments up-to-date.
952 * hppa.h: Update "free list" of letters and update
953 comments describing each letter's function.
955 Fri Jun 4 15:41:37 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
957 * h8300.h: checkpoint, includes H8/300-H opcodes.
959 Thu Jun 3 15:42:59 1993 Stu Grossman (grossman@cygnus.com)
961 * Patches from Jeffrey Law <law@cs.utah.edu>.
962 * hppa.h: Rework single precision FP
963 instructions so that they correctly disassemble code
966 Thu May 27 19:21:22 1993 Bruce Bauman (boot@osf.org)
968 * i386.h (i386_optab, mov pattern): Remove Mem16 restriction from
969 mov to allow instructions like mov ss,xyz(ecx) to assemble.
971 Tue May 25 00:39:40 1993 Ken Raeburn (raeburn@cygnus.com)
973 * hppa.h: Use new version from Utah if OLD_TABLE isn't defined;
974 gdb will define it for now.
976 Mon May 24 15:20:06 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
978 * sparc.h: Don't end enumerator list with comma.
980 Fri May 14 15:15:50 1993 Ian Lance Taylor (ian@cygnus.com)
982 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
983 * mips.h (OP_MASK_COPZ, OP_SH_COPZ): Define.
984 ("bc2t"): Correct typo.
985 ("[ls]wc[023]"): Use T rather than t.
986 ("c[0123]"): Define general coprocessor instructions.
988 Mon May 10 06:02:25 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
990 * m68k.h: Move split point for gcc compilation more towards
993 Fri Apr 9 13:26:16 1993 Jim Kingdon (kingdon@cygnus.com)
995 * rs6k.h: Clean up instructions for primary opcode 19 (many were
996 simply wrong, ics, rfi, & rfsvc were missing).
997 Add "a" to opr_ext for "bb". Doc fix.
999 Thu Mar 18 13:45:31 1993 Per Bothner (bothner@rtl.cygnus.com)
1001 * i386.h: 486 extensions from John Hassey (hassey@dg-rtp.dg.com).
1002 * mips.h: Add casts, to suppress warnings about shifting too much.
1003 * m68k.h: Document the placement code '9'.
1005 Thu Feb 18 02:03:14 1993 John Gilmore (gnu@cygnus.com)
1007 * m68k.h (BREAK_UP_BIG_DECL, AND_OTHER_PART): Add kludge which
1008 allows callers to break up the large initialized struct full of
1009 opcodes into two half-sized ones. This permits GCC to compile
1010 this module, since it takes exponential space for initializers.
1011 (numopcodes, endop): Revise to use AND_OTHER_PART in size calcs.
1013 Thu Feb 4 02:06:56 1993 John Gilmore (gnu@cygnus.com)
1015 * a29k.h: Remove RCS crud, update GPL to v2, update copyrights.
1016 * convex.h: Added, from GDB's convx-opcode.h. Added CONST to all
1017 initialized structs in it.
1019 Thu Jan 28 21:32:22 1993 John Gilmore (gnu@cygnus.com)
1021 Delta 88 changes inspired by Carl Greco, <cgreco@Creighton.Edu>:
1022 * m88k.h (PMEM): Avoid previous definition from <sys/param.h>.
1023 (AND): Change to AND_ to avoid ansidecl.h `AND' conflict.
1025 Sat Jan 23 18:10:49 PST 1993 Ralph Campbell (ralphc@pyramid.com)
1027 * mips.h: document "i" and "j" operands correctly.
1029 Thu Jan 7 15:58:13 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1031 * mips.h: Removed endianness dependency.
1033 Sun Jan 3 14:13:35 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1035 * h8300.h: include info on number of cycles per instruction.
1037 Mon Dec 21 21:29:08 1992 Stu Grossman (grossman at cygnus.com)
1039 * hppa.h: Move handy aliases to the front. Fix masks for extract
1040 and deposit instructions.
1042 Sat Dec 12 16:09:48 1992 Ian Lance Taylor (ian@cygnus.com)
1044 * i386.h: accept shld and shrd both with and without the shift
1045 count argument, which is always %cl.
1047 Fri Nov 27 17:13:18 1992 Ken Raeburn (raeburn at cygnus.com)
1049 * i386.h (i386_optab_end, i386_regtab_end): Now const.
1050 (one_byte_segment_defaults, two_byte_segment_defaults,
1051 i386_prefixtab_end): Ditto.
1053 Mon Nov 23 10:47:25 1992 Ken Raeburn (raeburn@cygnus.com)
1055 * vax.h (bb*): Use "v" (bitfield type), not "a" (address operand)
1056 for operand 2; from John Carr, jfc@dsg.dec.com.
1058 Wed Nov 4 07:36:49 1992 Ken Raeburn (raeburn@cygnus.com)
1060 * m68k.h: Define FIXED_SIZE_BRANCH, so bsr and bra instructions
1061 always use 16-bit offsets. Makes calculated-size jump tables
1064 Fri Oct 16 22:52:43 1992 Ken Raeburn (raeburn@cygnus.com)
1066 * i386.h: Fix one-operand forms of in* and out* patterns.
1068 Tue Sep 22 14:08:14 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1070 * m68k.h: Added CPU32 support.
1072 Tue Sep 22 00:38:41 1992 John Gilmore (gnu@cygnus.com)
1074 * mips.h (break): Disassemble the argument. Patch from
1075 jonathan@cs.stanford.edu (Jonathan Stone).
1077 Wed Sep 9 11:25:28 1992 Ian Lance Taylor (ian@cygnus.com)
1079 * m68k.h: merged Motorola and MIT syntax.
1081 Thu Sep 3 09:33:22 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1083 * m68k.h (pmove): make the tests less strict, the 68k book is
1086 Tue Aug 25 23:25:19 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1088 * m68k.h (m68ec030): Defined as alias for 68030.
1089 (m68k_opcodes): New type characters "3" for 68030 MMU regs and "t"
1090 for immediate 0-7 added. Set up some opcodes (ptest, bkpt) to use
1091 them. Tightened description of "fmovex" to distinguish it from
1092 some "pmove" encodings. Added "pmove" for 68030 MMU regs, cleaned
1093 up descriptions that claimed versions were available for chips not
1094 supporting them. Added "pmovefd".
1096 Mon Aug 24 12:04:51 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1098 * m68k.h: fix where the . goes in divull
1100 Wed Aug 19 11:22:24 1992 Ian Lance Taylor (ian@cygnus.com)
1102 * m68k.h: the cas2 instruction is supposed to be written with
1103 indirection on the last two operands, which can be either data or
1104 address registers. Added a new operand type 'r' which accepts
1105 either register type. Added new cases for cas2l and cas2w which
1106 use them. Corrected masks for cas2 which failed to recognize use
1107 of address register.
1109 Fri Aug 14 14:20:38 1992 Per Bothner (bothner@cygnus.com)
1111 * m68k.h: Merged in patches (mostly m68040-specific) from
1112 Colin Smith <colin@wrs.com>.
1114 * m68k.h: Merged m68kmri.h and m68k.h (using the former as a
1115 base). Also cleaned up duplicates, re-ordered instructions for
1116 the sake of dis-assembling (so aliases come after standard names).
1117 * m68kmri.h: Now just defines some macros, and #includes m68k.h.
1119 Wed Aug 12 16:38:15 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1121 * m68kmri.h: added various opcodes. Moved jbxx to bxxes. Filled in
1124 Mon Aug 10 23:22:33 1992 Ken Raeburn (raeburn@cygnus.com)
1126 * sparc.h: Moved tables to BFD library.
1128 * i386.h (i386_optab): Add fildq, fistpq aliases used by gcc.
1130 Sun Jun 28 13:29:03 1992 Fred Fish (fnf@cygnus.com)
1132 * h8300.h: Finish filling in all the holes in the opcode table,
1133 so that the Lucid C compiler can digest this as well...
1135 Fri Jun 26 21:27:17 1992 John Gilmore (gnu at cygnus.com)
1137 * i386.h: Add setc, setnc, addr16, data16, repz, repnz aliases.
1138 Fix opcodes on various sizes of fild/fist instructions
1139 (16bit=no suffix, 32bit="l" suffix, 64bit="ll" suffix).
1140 Use tabs to indent for comments. Fixes suggested by Minh Tran-Le.
1142 Thu Jun 25 16:13:26 1992 Stu Grossman (grossman at cygnus.com)
1144 * h8300.h: Fill in all the holes in the opcode table so that the
1145 losing HPUX C compiler can digest this...
1147 Thu Jun 11 12:15:25 1992 John Gilmore (gnu at cygnus.com)
1149 * mips.h: Fix decoding of coprocessor instructions, somewhat.
1150 (Fix by Eric Anderson, 3jean@maas-neotek.arc.nasa.gov.)
1152 Thu May 28 11:17:44 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
1154 * sparc.h: Add new architecture variant sparclite; add its scan
1155 and divscc opcodes. Define ARCHITECTURES_CONFLICT_P macro.
1157 Tue May 5 14:23:27 1992 Per Bothner (bothner@rtl.cygnus.com)
1159 * mips.h: Add some more opcode synonyms (from Frank Yellin,
1162 Thu Apr 16 18:25:26 1992 Per Bothner (bothner@cygnus.com)
1164 * rs6k.h: New version from IBM (Metin).
1166 Thu Apr 9 00:31:19 1992 Per Bothner (bothner@rtl.cygnus.com)
1168 * rs6k.h: Fix incorrect extended opcode for instructions `fm'
1169 and `fd'. (From metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik).)
1171 Tue Apr 7 13:38:47 1992 Stu Grossman (grossman at cygnus.com)
1173 * rs6k.h: Move from ../../gdb/rs6k-opcode.h.
1175 Fri Apr 3 11:30:20 1992 Fred Fish (fnf@cygnus.com)
1177 * m68k.h (one, two): Cast macro args to unsigned to suppress
1178 complaints from compiler and lint about integer overflow during
1181 Sun Mar 29 12:22:08 1992 John Gilmore (gnu at cygnus.com)
1183 * sparc.h (OP): Avoid signed overflow when shifting to high order bit.
1185 Fri Mar 6 00:22:38 1992 John Gilmore (gnu at cygnus.com)
1187 * mips.h: Make bitfield layout depend on the HOST compiler,
1188 not on the TARGET system.
1190 Fri Feb 21 01:29:51 1992 K. Richard Pixley (rich@cygnus.com)
1192 * i386.h: added inb, inw, outb, outw opcodes, added att syntax for
1193 scmp, slod, smov, ssca, ssto. Curtesy Minh Tran-Le
1194 <TRANLE@INTELLICORP.COM>.
1196 Thu Jan 30 07:31:44 1992 Steve Chamberlain (sac at rtl.cygnus.com)
1198 * h8300.h: turned op_type enum into #define list
1200 Thu Jan 30 01:07:24 1992 John Gilmore (gnu at cygnus.com)
1202 * sparc.h: Remove "cypress" architecture. Remove "fitox" and
1203 similar instructions -- they've been renamed to "fitoq", etc.
1204 REALLY fix tsubcctv. Fix "fcmpeq" and "fcmpq" which had wrong
1205 number of arguments.
1206 * h8300.h: Remove extra ; which produces compiler warning.
1208 Tue Jan 28 22:59:22 1992 Stu Grossman (grossman at cygnus.com)
1210 * sparc.h: fix opcode for tsubcctv.
1212 Tue Jan 7 17:19:39 1992 K. Richard Pixley (rich at cygnus.com)
1214 * sparc.h: fba and cba are now aliases for fb and cb respectively.
1216 Fri Dec 27 10:55:50 1991 Per Bothner (bothner at cygnus.com)
1218 * sparc.h (nop): Made the 'lose' field be even tighter,
1219 so only a standard 'nop' is disassembled as a nop.
1221 Sun Dec 22 12:18:18 1991 Michael Tiemann (tiemann at cygnus.com)
1223 * sparc.h (nop): Add RD_GO to `lose' so that only %g0 in dest is
1224 disassembled as a nop.
1226 Tue Dec 10 00:22:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
1228 * sparc.h: fix a typo.
1230 Sat Nov 30 20:40:51 1991 Steve Chamberlain (sac at rtl.cygnus.com)
1232 * a29k.h, arm.h, h8300.h, i386.h, i860.h, i960.h , m68k.h,
1233 m88k.h, mips.h , np1.h, ns32k.h, pn.h, pyr.h, sparc.h, tahoe.h,
1234 vax.h, ChangeLog: renamed from ../<foo>-opcode.h
1238 version-control: never