1 /* opcode/i386.h -- Intel 80386 opcode macros
2 Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
3 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
4 Free Software Foundation, Inc.
6 This file is part of GAS, the GNU Assembler, and GDB, the GNU Debugger.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
22 /* The SystemV/386 SVR3.2 assembler, and probably all AT&T derived
23 ix86 Unix assemblers, generate floating point instructions with
24 reversed source and destination registers in certain cases.
25 Unfortunately, gcc and possibly many other programs use this
26 reversed syntax, so we're stuck with it.
28 eg. `fsub %st(3),%st' results in st = st - st(3) as expected, but
29 `fsub %st,%st(3)' results in st(3) = st - st(3), rather than
30 the expected st(3) = st(3) - st
32 This happens with all the non-commutative arithmetic floating point
33 operations with two register operands, where the source register is
34 %st, and destination register is %st(i).
36 The affected opcode map is dceX, dcfX, deeX, defX. */
41 #ifndef SYSV386_COMPAT
42 /* Set non-zero for broken, compatible instructions. Set to zero for
43 non-broken opcodes at your peril. gcc generates SystemV/386
44 compatible instructions. */
45 #define SYSV386_COMPAT 1
48 /* Set non-zero to cater for old (<= 2.8.1) versions of gcc that could
49 generate nonsense fsubp, fsubrp, fdivp and fdivrp with operands
51 #define OLDGCC_COMPAT SYSV386_COMPAT
54 #define MOV_AX_DISP32 0xa0
55 #define POP_SEG_SHORT 0x07
56 #define JUMP_PC_RELATIVE 0xeb
57 #define INT_OPCODE 0xcd
58 #define INT3_OPCODE 0xcc
59 /* The opcode for the fwait instruction, which disassembler treats as a
60 prefix when it can. */
61 #define FWAIT_OPCODE 0x9b
63 /* Instruction prefixes.
64 NOTE: For certain SSE* instructions, 0x66,0xf2,0xf3 are treated as
65 part of the opcode. Other prefixes may still appear between them
66 and the 0x0f part of the opcode. */
67 #define ADDR_PREFIX_OPCODE 0x67
68 #define DATA_PREFIX_OPCODE 0x66
69 #define LOCK_PREFIX_OPCODE 0xf0
70 #define CS_PREFIX_OPCODE 0x2e
71 #define DS_PREFIX_OPCODE 0x3e
72 #define ES_PREFIX_OPCODE 0x26
73 #define FS_PREFIX_OPCODE 0x64
74 #define GS_PREFIX_OPCODE 0x65
75 #define SS_PREFIX_OPCODE 0x36
76 #define REPNE_PREFIX_OPCODE 0xf2
77 #define REPE_PREFIX_OPCODE 0xf3
79 #define TWO_BYTE_OPCODE_ESCAPE 0x0f
80 #define NOP_OPCODE (char) 0x90
82 /* register numbers */
92 /* modrm_byte.regmem for twobyte escape */
93 #define ESCAPE_TO_TWO_BYTE_ADDRESSING ESP_REG_NUM
94 /* index_base_byte.index for no index register addressing */
95 #define NO_INDEX_REGISTER ESP_REG_NUM
96 /* index_base_byte.base for no base register addressing */
97 #define NO_BASE_REGISTER EBP_REG_NUM
98 #define NO_BASE_REGISTER_16 6
100 /* modrm.mode = REGMEM_FIELD_HAS_REG when a register is in there */
101 #define REGMEM_FIELD_HAS_REG 0x3/* always = 0x3 */
102 #define REGMEM_FIELD_HAS_MEM (~REGMEM_FIELD_HAS_REG)
104 /* Extract fields from the mod/rm byte. */
105 #define MODRM_MOD_FIELD(modrm) (((modrm) >> 6) & 3)
106 #define MODRM_REG_FIELD(modrm) (((modrm) >> 3) & 7)
107 #define MODRM_RM_FIELD(modrm) (((modrm) >> 0) & 7)
109 /* Extract fields from the sib byte. */
110 #define SIB_SCALE_FIELD(sib) (((sib) >> 6) & 3)
111 #define SIB_INDEX_FIELD(sib) (((sib) >> 3) & 7)
112 #define SIB_BASE_FIELD(sib) (((sib) >> 0) & 7)
114 /* x86-64 extension prefix. */
115 #define REX_OPCODE 0x40
117 /* Non-zero if OPCODE is the rex prefix. */
118 #define REX_PREFIX_P(opcode) (((opcode) & 0xf0) == REX_OPCODE)
120 /* Indicates 64 bit operand size. */
122 /* High extension to reg field of modrm byte. */
124 /* High extension to SIB index field. */
126 /* High extension to base field of modrm or SIB, or reg field of opcode. */
129 /* max operands per insn */
130 #define MAX_OPERANDS 5
132 /* max immediates per insn (lcall, ljmp, insertq, extrq) */
133 #define MAX_IMMEDIATE_OPERANDS 2
135 /* max memory refs per insn (string ops) */
136 #define MAX_MEMORY_OPERANDS 2
138 /* max size of insn mnemonics. */
139 #define MAX_MNEM_SIZE 20
141 /* max size of register name in insn mnemonics. */
142 #define MAX_REG_NAME_SIZE 8
144 #endif /* OPCODE_I386_H */
This page took 0.031377 seconds and 4 git commands to generate.