include/opcode/mips.h

   1 /* mips.h.  Mips opcode list for GDB, the GNU debugger.
   2    Copyright 1993, 94, 95, 96, 1997 Free Software Foundation, Inc.
   3    Contributed by Ralph Campbell and OSF
   4    Commented and modified by Ian Lance Taylor, Cygnus Support
   5
   6 This file is part of GDB, GAS, and the GNU binutils.
   7
   8 GDB, GAS, and the GNU binutils are free software; you can redistribute
   9 them and/or modify them under the terms of the GNU General Public
  10 License as published by the Free Software Foundation; either version
  11 1, or (at your option) any later version.
  12
  13 GDB, GAS, and the GNU binutils are distributed in the hope that they
  14 will be useful, but WITHOUT ANY WARRANTY; without even the implied
  15 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
  16 the GNU General Public License for more details.
  17
  18 You should have received a copy of the GNU General Public License
  19 along with this file; see the file COPYING.  If not, write to the Free
  20 Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
  21
  22 #ifndef _MIPS_H_
  23 #define _MIPS_H_
  24
  25 /* These are bit masks and shift counts to use to access the various
  26    fields of an instruction.  To retrieve the X field of an
  27    instruction, use the expression
  28         (i >> OP_SH_X) & OP_MASK_X
  29    To set the same field (to j), use
  30         i = (i &~ (OP_MASK_X << OP_SH_X)) | (j << OP_SH_X)
  31
  32    Make sure you use fields that are appropriate for the instruction,
  33    of course.
  34
  35    The 'i' format uses OP, RS, RT and IMMEDIATE.
  36
  37    The 'j' format uses OP and TARGET.
  38
  39    The 'r' format uses OP, RS, RT, RD, SHAMT and FUNCT.
  40
  41    The 'b' format uses OP, RS, RT and DELTA.
  42
  43    The floating point 'i' format uses OP, RS, RT and IMMEDIATE.
  44
  45    The floating point 'r' format uses OP, FMT, FT, FS, FD and FUNCT.
  46
  47    A breakpoint instruction uses OP, CODE and SPEC (10 bits of the
  48    breakpoint instruction are not defined; Kane says the breakpoint
  49    code field in BREAK is 20 bits; yet MIPS assemblers and debuggers
  50    only use ten bits).  An optional two-operand form of break/sdbbp
  51    allows the lower ten bits to be set too.
  52
  53    The syscall instruction uses SYSCALL.
  54
  55    The general coprocessor instructions use COPZ.  */
  56
  57 #define OP_MASK_OP              0x3f
  58 #define OP_SH_OP                26
  59 #define OP_MASK_RS              0x1f
  60 #define OP_SH_RS                21
  61 #define OP_MASK_FR              0x1f
  62 #define OP_SH_FR                21
  63 #define OP_MASK_FMT             0x1f
  64 #define OP_SH_FMT               21
  65 #define OP_MASK_BCC             0x7
  66 #define OP_SH_BCC               18
  67 #define OP_MASK_CODE            0x3ff
  68 #define OP_SH_CODE              16
  69 #define OP_MASK_CODE2           0x3ff
  70 #define OP_SH_CODE2             6
  71 #define OP_MASK_RT              0x1f
  72 #define OP_SH_RT                16
  73 #define OP_MASK_FT              0x1f
  74 #define OP_SH_FT                16
  75 #define OP_MASK_CACHE           0x1f
  76 #define OP_SH_CACHE             16
  77 #define OP_MASK_RD              0x1f
  78 #define OP_SH_RD                11
  79 #define OP_MASK_FS              0x1f
  80 #define OP_SH_FS                11
  81 #define OP_MASK_PREFX           0x1f
  82 #define OP_SH_PREFX             11
  83 #define OP_MASK_CCC             0x7
  84 #define OP_SH_CCC               8
  85 #define OP_MASK_SYSCALL         0xfffff
  86 #define OP_SH_SYSCALL           6
  87 #define OP_MASK_SHAMT           0x1f
  88 #define OP_SH_SHAMT             6
  89 #define OP_MASK_FD              0x1f
  90 #define OP_SH_FD                6
  91 #define OP_MASK_TARGET          0x3ffffff
  92 #define OP_SH_TARGET            0
  93 #define OP_MASK_COPZ            0x1ffffff
  94 #define OP_SH_COPZ              0
  95 #define OP_MASK_IMMEDIATE       0xffff
  96 #define OP_SH_IMMEDIATE         0
  97 #define OP_MASK_DELTA           0xffff
  98 #define OP_SH_DELTA             0
  99 #define OP_MASK_FUNCT           0x3f
 100 #define OP_SH_FUNCT             0
 101 #define OP_MASK_SPEC            0x3f
 102 #define OP_SH_SPEC              0
 103 #define OP_SH_LOCC              8       /* FP condition code */
 104 #define OP_SH_HICC              18      /* FP condition code */
 105 #define OP_MASK_CC              0x7
 106 #define OP_SH_COP1NORM          25      /* Normal COP1 encoding */
 107 #define OP_MASK_COP1NORM        0x1     /* a single bit */
 108 #define OP_SH_COP1SPEC          21      /* COP1 encodings */
 109 #define OP_MASK_COP1SPEC        0xf
 110 #define OP_MASK_COP1SCLR        0x4
 111 #define OP_MASK_COP1CMP         0x3
 112 #define OP_SH_COP1CMP           4
 113 #define OP_SH_FORMAT            21      /* FP short format field */
 114 #define OP_MASK_FORMAT          0x7
 115 #define OP_SH_TRUE              16
 116 #define OP_MASK_TRUE            0x1
 117 #define OP_SH_GE                17
 118 #define OP_MASK_GE              0x01
 119 #define OP_SH_UNSIGNED          16
 120 #define OP_MASK_UNSIGNED        0x1
 121 #define OP_SH_HINT              16
 122 #define OP_MASK_HINT            0x1f
 123 #define OP_SH_MMI               0       /* Multimedia (parallel) op */
 124 #define OP_MASK_MMI             0x3f
 125 #define OP_SH_MMISUB            6
 126 #define OP_MASK_MMISUB          0x1f
 127 #define OP_MASK_PERFREG         0x1f    /* Performance monitoring */
 128 #define OP_SH_PERFREG           1
 129
 130 /* This structure holds information for a particular instruction.  */
 131
 132 struct mips_opcode
 133 {
 134   /* The name of the instruction.  */
 135   const char *name;
 136   /* A string describing the arguments for this instruction.  */
 137   const char *args;
 138   /* The basic opcode for the instruction.  When assembling, this
 139      opcode is modified by the arguments to produce the actual opcode
 140      that is used.  If pinfo is INSN_MACRO, then this is 0.  */
 141   unsigned long match;
 142   /* If pinfo is not INSN_MACRO, then this is a bit mask for the
 143      relevant portions of the opcode when disassembling.  If the
 144      actual opcode anded with the match field equals the opcode field,
 145      then we have found the correct instruction.  If pinfo is
 146      INSN_MACRO, then this field is the macro identifier.  */
 147   unsigned long mask;
 148   /* For a macro, this is INSN_MACRO.  Otherwise, it is a collection
 149      of bits describing the instruction, notably any relevant hazard
 150      information.  */
 151   unsigned long pinfo;
 152   /* A collection of bits describing the instruction sets of which this
 153      instruction or macro is a member. */
 154   unsigned long membership;
 155 };
 156
 157 /* These are the characters which may appears in the args field of an
 158    instruction.  They appear in the order in which the fields appear
 159    when the instruction is used.  Commas and parentheses in the args
 160    string are ignored when assembling, and written into the output
 161    when disassembling.
 162
 163    Each of these characters corresponds to a mask field defined above.
 164
 165    "<" 5 bit shift amount (OP_*_SHAMT)
 166    ">" shift amount between 32 and 63, stored after subtracting 32 (OP_*_SHAMT)
 167    "a" 26 bit target address (OP_*_TARGET)
 168    "b" 5 bit base register (OP_*_RS)
 169    "c" 10 bit breakpoint code (OP_*_CODE)
 170    "d" 5 bit destination register specifier (OP_*_RD)
 171    "h" 5 bit prefx hint (OP_*_PREFX)
 172    "i" 16 bit unsigned immediate (OP_*_IMMEDIATE)
 173    "j" 16 bit signed immediate (OP_*_DELTA)
 174    "k" 5 bit cache opcode in target register position (OP_*_CACHE)
 175    "o" 16 bit signed offset (OP_*_DELTA)
 176    "p" 16 bit PC relative branch target address (OP_*_DELTA)
 177    "q" 10 bit extra breakpoint code (OP_*_CODE2)
 178    "r" 5 bit same register used as both source and target (OP_*_RS)
 179    "s" 5 bit source register specifier (OP_*_RS)
 180    "t" 5 bit target register (OP_*_RT)
 181    "u" 16 bit upper 16 bits of address (OP_*_IMMEDIATE)
 182    "v" 5 bit same register used as both source and destination (OP_*_RS)
 183    "w" 5 bit same register used as both target and destination (OP_*_RT)
 184    "C" 25 bit coprocessor function code (OP_*_COPZ)
 185    "B" 20 bit syscall function code (OP_*_SYSCALL)
 186    "x" accept and ignore register name
 187    "z" must be zero register
 188
 189    Floating point instructions:
 190    "D" 5 bit destination register (OP_*_FD)
 191    "M" 3 bit compare condition code (OP_*_CCC) (only used for mips4 and up)
 192    "N" 3 bit branch condition code (OP_*_BCC) (only used for mips4 and up)
 193    "S" 5 bit fs source 1 register (OP_*_FS)
 194    "T" 5 bit ft source 2 register (OP_*_FT)
 195    "R" 5 bit fr source 3 register (OP_*_FR)
 196    "V" 5 bit same register used as floating source and destination (OP_*_FS)
 197    "W" 5 bit same register used as floating target and destination (OP_*_FT)
 198
 199    Coprocessor instructions:
 200    "E" 5 bit target register (OP_*_RT)
 201    "G" 5 bit destination register (OP_*_RD)
 202    "P" 5 bit performance-monitor register (OP_*_PERFREG)
 203
 204    Macro instructions:
 205    "A" General 32 bit expression
 206    "I" 32 bit immediate
 207    "F" 64 bit floating point constant in .rdata
 208    "L" 64 bit floating point constant in .lit8
 209    "f" 32 bit floating point constant
 210    "l" 32 bit floating point constant in .lit4
 211
 212    Other:
 213    "()" parens surrounding optional value
 214    ","  separates operands
 215
 216    Characters used so far, for quick reference when adding more:
 217    "<>(),"
 218    "ABCDEFGILMNSTRVW"
 219    "abcdfhijklopqrstuvwxz"
 220 */
 221
 222 /* These are the bits which may be set in the pinfo field of an
 223    instructions, if it is not equal to INSN_MACRO.  */
 224
 225 /* Modifies the general purpose register in OP_*_RD.  */
 226 #define INSN_WRITE_GPR_D            0x00000001
 227 /* Modifies the general purpose register in OP_*_RT.  */
 228 #define INSN_WRITE_GPR_T            0x00000002
 229 /* Modifies general purpose register 31.  */
 230 #define INSN_WRITE_GPR_31           0x00000004
 231 /* Modifies the floating point register in OP_*_FD.  */
 232 #define INSN_WRITE_FPR_D            0x00000008
 233 /* Modifies the floating point register in OP_*_FS.  */
 234 #define INSN_WRITE_FPR_S            0x00000010
 235 /* Modifies the floating point register in OP_*_FT.  */
 236 #define INSN_WRITE_FPR_T            0x00000020
 237 /* Reads the general purpose register in OP_*_RS.  */
 238 #define INSN_READ_GPR_S             0x00000040
 239 /* Reads the general purpose register in OP_*_RT.  */
 240 #define INSN_READ_GPR_T             0x00000080
 241 /* Reads the floating point register in OP_*_FS.  */
 242 #define INSN_READ_FPR_S             0x00000100
 243 /* Reads the floating point register in OP_*_FT.  */
 244 #define INSN_READ_FPR_T             0x00000200
 245 /* Reads the floating point register in OP_*_FR.  */
 246 #define INSN_READ_FPR_R             0x00000400
 247 /* Modifies coprocessor condition code.  */
 248 #define INSN_WRITE_COND_CODE        0x00000800
 249 /* Reads coprocessor condition code.  */
 250 #define INSN_READ_COND_CODE         0x00001000
 251 /* TLB operation.  */
 252 #define INSN_TLB                    0x00002000
 253 /* Reads coprocessor register other than floating point register.  */
 254 #define INSN_COP                    0x00004000
 255 /* Instruction loads value from memory, requiring delay.  */
 256 #define INSN_LOAD_MEMORY_DELAY      0x00008000
 257 /* Instruction loads value from coprocessor, requiring delay.  */
 258 #define INSN_LOAD_COPROC_DELAY      0x00010000
 259 /* Instruction has unconditional branch delay slot.  */
 260 #define INSN_UNCOND_BRANCH_DELAY    0x00020000
 261 /* Instruction has conditional branch delay slot.  */
 262 #define INSN_COND_BRANCH_DELAY      0x00040000
 263 /* Conditional branch likely: if branch not taken, insn nullified.  */
 264 #define INSN_COND_BRANCH_LIKELY     0x00080000
 265 /* Moves to coprocessor register, requiring delay.  */
 266 #define INSN_COPROC_MOVE_DELAY      0x00100000
 267 /* Loads coprocessor register from memory, requiring delay.  */
 268 #define INSN_COPROC_MEMORY_DELAY    0x00200000
 269 /* Reads the HI register.  */
 270 #define INSN_READ_HI                0x00400000
 271 /* Reads the LO register.  */
 272 #define INSN_READ_LO                0x00800000
 273 /* Modifies the HI register.  */
 274 #define INSN_WRITE_HI               0x01000000
 275 /* Modifies the LO register.  */
 276 #define INSN_WRITE_LO               0x02000000
 277 /* Takes a trap (easier to keep out of delay slot).  */
 278 #define INSN_TRAP                   0x04000000
 279 /* Instruction stores value into memory.  */
 280 #define INSN_STORE_MEMORY           0x08000000
 281 /* Instruction uses single precision floating point.  */
 282 #define FP_S                        0x10000000
 283 /* Instruction uses double precision floating point.  */
 284 #define FP_D                        0x20000000
 285 /* Instruction is part of the tx39's integer multiply family.    */
 286 #define INSN_MULT                   0x40000000
 287 /* Instruction synchronize shared memory.  */
 288 #define INSN_SYNC                   0x80000000
 289
 290 /* Instruction is actually a macro.  It should be ignored by the
 291    disassembler, and requires special treatment by the assembler.  */
 292 #define INSN_MACRO                  0xffffffff
 293
 294
 295
 296
 297
 298 /* MIPS ISA field--CPU level at which insn is supported.  */
 299 #define INSN_ISA                    0x0000000F
 300 /* An instruction which is not part of any basic MIPS ISA.
 301    (ie it is a chip specific instruction)  */
 302 #define INSN_NO_ISA                 0x00000000
 303 /* MIPS ISA 1 instruction.  */
 304 #define INSN_ISA1                   0x00000001
 305 /* MIPS ISA 2 instruction (R6000 or R4000).  */
 306 #define INSN_ISA2                   0x00000002
 307 /* MIPS ISA 3 instruction (R4000).  */
 308 #define INSN_ISA3                   0x00000003
 309 /* MIPS ISA 4 instruction (R8000).  */
 310 #define INSN_ISA4                   0x00000004
 311
 312 /* Chip specific instructions.  These are bitmasks.  */
 313 /* MIPS R4650 instruction.  */
 314 #define INSN_4650                   0x00000010
 315 /* LSI R4010 instruction.  */
 316 #define INSN_4010                   0x00000020
 317 /* NEC VR4100 instruction. */
 318 #define INSN_4100                   0x00000040
 319 /* Toshiba R3900 instruction.  */
 320 #define INSN_3900                   0x00000080
 321
 322 /* Test for membership in an ISA including chip specific ISAs.
 323    INSN is pointer to an element of the opcode table; ISA is the
 324    specified ISA to test against; and CPU is the CPU specific ISA
 325    to test, or zero if no CPU specific ISA test is desired. */
 326
 327 #define OPCODE_IS_MEMBER(insn,isa,cpu)                          \
 328     ((((insn)->membership & INSN_ISA) != 0                      \
 329       && ((insn)->membership & INSN_ISA) <= isa)                \
 330      || (cpu == 4650                                            \
 331          && ((insn)->membership & INSN_4650) != 0)              \
 332      || (cpu == 4010                                            \
 333          && ((insn)->membership & INSN_4010) != 0)              \
 334      || ((cpu == 4100                                           \
 335           || cpu == 4111                                        \
 336           )                                                     \
 337          && ((insn)->membership & INSN_4100) != 0)              \
 338      || (cpu == 3900                                            \
 339          && ((insn)->membership & INSN_3900) != 0))
 340
 341 /* This is a list of macro expanded instructions.
 342  *
 343  * _I appended means immediate
 344  * _A appended means address
 345  * _AB appended means address with base register
 346  * _D appended means 64 bit floating point constant
 347  * _S appended means 32 bit floating point constant
 348  */
 349 enum {
 350     M_ABS,
 351     M_ADD_I,
 352     M_ADDU_I,
 353     M_AND_I,
 354     M_BEQ,
 355     M_BEQ_I,
 356     M_BEQL_I,
 357     M_BGE,
 358     M_BGEL,
 359     M_BGE_I,
 360     M_BGEL_I,
 361     M_BGEU,
 362     M_BGEUL,
 363     M_BGEU_I,
 364     M_BGEUL_I,
 365     M_BGT,
 366     M_BGTL,
 367     M_BGT_I,
 368     M_BGTL_I,
 369     M_BGTU,
 370     M_BGTUL,
 371     M_BGTU_I,
 372     M_BGTUL_I,
 373     M_BLE,
 374     M_BLEL,
 375     M_BLE_I,
 376     M_BLEL_I,
 377     M_BLEU,
 378     M_BLEUL,
 379     M_BLEU_I,
 380     M_BLEUL_I,
 381     M_BLT,
 382     M_BLTL,
 383     M_BLT_I,
 384     M_BLTL_I,
 385     M_BLTU,
 386     M_BLTUL,
 387     M_BLTU_I,
 388     M_BLTUL_I,
 389     M_BNE,
 390     M_BNE_I,
 391     M_BNEL_I,
 392     M_DABS,
 393     M_DADD_I,
 394     M_DADDU_I,
 395     M_DDIV_3,
 396     M_DDIV_3I,
 397     M_DDIVU_3,
 398     M_DDIVU_3I,
 399     M_DIV_3,
 400     M_DIV_3I,
 401     M_DIVU_3,
 402     M_DIVU_3I,
 403     M_DLA_AB,
 404     M_DLI,
 405     M_DMUL,
 406     M_DMUL_I,
 407     M_DMULO,
 408     M_DMULO_I,
 409     M_DMULOU,
 410     M_DMULOU_I,
 411     M_DREM_3,
 412     M_DREM_3I,
 413     M_DREMU_3,
 414     M_DREMU_3I,
 415     M_DSUB_I,
 416     M_DSUBU_I,
 417     M_DSUBU_I_2,
 418     M_J_A,
 419     M_JAL_1,
 420     M_JAL_2,
 421     M_JAL_A,
 422     M_L_DOB,
 423     M_L_DAB,
 424     M_LA_AB,
 425     M_LB_A,
 426     M_LB_AB,
 427     M_LBU_A,
 428     M_LBU_AB,
 429     M_LD_A,
 430     M_LD_OB,
 431     M_LD_AB,
 432     M_LDC1_AB,
 433     M_LDC2_AB,
 434     M_LDC3_AB,
 435     M_LDL_AB,
 436     M_LDR_AB,
 437     M_LH_A,
 438     M_LH_AB,
 439     M_LHU_A,
 440     M_LHU_AB,
 441     M_LI,
 442     M_LI_D,
 443     M_LI_DD,
 444     M_LI_S,
 445     M_LI_SS,
 446     M_LL_AB,
 447     M_LLD_AB,
 448     M_LS_A,
 449     M_LW_A,
 450     M_LW_AB,
 451     M_LWC0_A,
 452     M_LWC0_AB,
 453     M_LWC1_A,
 454     M_LWC1_AB,
 455     M_LWC2_A,
 456     M_LWC2_AB,
 457     M_LWC3_A,
 458     M_LWC3_AB,
 459     M_LWL_A,
 460     M_LWL_AB,
 461     M_LWR_A,
 462     M_LWR_AB,
 463     M_LWU_AB,
 464     M_MUL,
 465     M_MUL_I,
 466     M_MULO,
 467     M_MULO_I,
 468     M_MULOU,
 469     M_MULOU_I,
 470     M_NOR_I,
 471     M_OR_I,
 472     M_REM_3,
 473     M_REM_3I,
 474     M_REMU_3,
 475     M_REMU_3I,
 476     M_ROL,
 477     M_ROL_I,
 478     M_ROR,
 479     M_ROR_I,
 480     M_S_DA,
 481     M_S_DOB,
 482     M_S_DAB,
 483     M_S_S,
 484     M_SC_AB,
 485     M_SCD_AB,
 486     M_SD_A,
 487     M_SD_OB,
 488     M_SD_AB,
 489     M_SDC1_AB,
 490     M_SDC2_AB,
 491     M_SDC3_AB,
 492     M_SDL_AB,
 493     M_SDR_AB,
 494     M_SEQ,
 495     M_SEQ_I,
 496     M_SGE,
 497     M_SGE_I,
 498     M_SGEU,
 499     M_SGEU_I,
 500     M_SGT,
 501     M_SGT_I,
 502     M_SGTU,
 503     M_SGTU_I,
 504     M_SLE,
 505     M_SLE_I,
 506     M_SLEU,
 507     M_SLEU_I,
 508     M_SLT_I,
 509     M_SLTU_I,
 510     M_SNE,
 511     M_SNE_I,
 512     M_SB_A,
 513     M_SB_AB,
 514     M_SH_A,
 515     M_SH_AB,
 516     M_SW_A,
 517     M_SW_AB,
 518     M_SWC0_A,
 519     M_SWC0_AB,
 520     M_SWC1_A,
 521     M_SWC1_AB,
 522     M_SWC2_A,
 523     M_SWC2_AB,
 524     M_SWC3_A,
 525     M_SWC3_AB,
 526     M_SWL_A,
 527     M_SWL_AB,
 528     M_SWR_A,
 529     M_SWR_AB,
 530     M_SUB_I,
 531     M_SUBU_I,
 532     M_SUBU_I_2,
 533     M_TEQ_I,
 534     M_TGE_I,
 535     M_TGEU_I,
 536     M_TLT_I,
 537     M_TLTU_I,
 538     M_TNE_I,
 539     M_TRUNCWD,
 540     M_TRUNCWS,
 541     M_ULD,
 542     M_ULD_A,
 543     M_ULH,
 544     M_ULH_A,
 545     M_ULHU,
 546     M_ULHU_A,
 547     M_ULW,
 548     M_ULW_A,
 549     M_USH,
 550     M_USH_A,
 551     M_USW,
 552     M_USW_A,
 553     M_USD,
 554     M_USD_A,
 555     M_XOR_I,
 556     M_COP0,
 557     M_COP1,
 558     M_COP2,
 559     M_COP3,
 560     M_NUM_MACROS
 561 };
 562
 563
 564 /* The order of overloaded instructions matters.  Label arguments and
 565    register arguments look the same. Instructions that can have either
 566    for arguments must apear in the correct order in this table for the
 567    assembler to pick the right one. In other words, entries with
 568    immediate operands must apear after the same instruction with
 569    registers.
 570
 571    Many instructions are short hand for other instructions (i.e., The
 572    jal <register> instruction is short for jalr <register>).  */
 573
 574 extern const struct mips_opcode mips_builtin_opcodes[];
 575 extern const int bfd_mips_num_builtin_opcodes;
 576 extern struct mips_opcode *mips_opcodes;
 577 extern int bfd_mips_num_opcodes;
 578 #define NUMOPCODES bfd_mips_num_opcodes
 579
 580 \f
 581 /* The rest of this file adds definitions for the mips16 TinyRISC
 582    processor.  */
 583
 584 /* These are the bitmasks and shift counts used for the different
 585    fields in the instruction formats.  Other than OP, no masks are
 586    provided for the fixed portions of an instruction, since they are
 587    not needed.
 588
 589    The I format uses IMM11.
 590
 591    The RI format uses RX and IMM8.
 592
 593    The RR format uses RX, and RY.
 594
 595    The RRI format uses RX, RY, and IMM5.
 596
 597    The RRR format uses RX, RY, and RZ.
 598
 599    The RRI_A format uses RX, RY, and IMM4.
 600
 601    The SHIFT format uses RX, RY, and SHAMT.
 602
 603    The I8 format uses IMM8.
 604
 605    The I8_MOVR32 format uses RY and REGR32.
 606
 607    The IR_MOV32R format uses REG32R and MOV32Z.
 608
 609    The I64 format uses IMM8.
 610
 611    The RI64 format uses RY and IMM5.
 612    */
 613
 614 #define MIPS16OP_MASK_OP        0x1f
 615 #define MIPS16OP_SH_OP          11
 616 #define MIPS16OP_MASK_IMM11     0x7ff
 617 #define MIPS16OP_SH_IMM11       0
 618 #define MIPS16OP_MASK_RX        0x7
 619 #define MIPS16OP_SH_RX          8
 620 #define MIPS16OP_MASK_IMM8      0xff
 621 #define MIPS16OP_SH_IMM8        0
 622 #define MIPS16OP_MASK_RY        0x7
 623 #define MIPS16OP_SH_RY          5
 624 #define MIPS16OP_MASK_IMM5      0x1f
 625 #define MIPS16OP_SH_IMM5        0
 626 #define MIPS16OP_MASK_RZ        0x7
 627 #define MIPS16OP_SH_RZ          2
 628 #define MIPS16OP_MASK_IMM4      0xf
 629 #define MIPS16OP_SH_IMM4        0
 630 #define MIPS16OP_MASK_REGR32    0x1f
 631 #define MIPS16OP_SH_REGR32      0
 632 #define MIPS16OP_MASK_REG32R    0x1f
 633 #define MIPS16OP_SH_REG32R      3
 634 #define MIPS16OP_EXTRACT_REG32R(i) ((((i) >> 5) & 7) | ((i) & 0x18))
 635 #define MIPS16OP_MASK_MOVE32Z   0x7
 636 #define MIPS16OP_SH_MOVE32Z     0
 637 #define MIPS16OP_MASK_IMM6      0x3f
 638 #define MIPS16OP_SH_IMM6        5
 639
 640 /* These are the characters which may appears in the args field of an
 641    instruction.  They appear in the order in which the fields appear
 642    when the instruction is used.  Commas and parentheses in the args
 643    string are ignored when assembling, and written into the output
 644    when disassembling.
 645
 646    "y" 3 bit register (MIPS16OP_*_RY)
 647    "x" 3 bit register (MIPS16OP_*_RX)
 648    "z" 3 bit register (MIPS16OP_*_RZ)
 649    "Z" 3 bit register (MIPS16OP_*_MOVE32Z)
 650    "v" 3 bit same register as source and destination (MIPS16OP_*_RX)
 651    "w" 3 bit same register as source and destination (MIPS16OP_*_RY)
 652    "0" zero register ($0)
 653    "S" stack pointer ($sp or $29)
 654    "P" program counter
 655    "R" return address register ($ra or $31)
 656    "X" 5 bit MIPS register (MIPS16OP_*_REGR32)
 657    "Y" 5 bit MIPS register (MIPS16OP_*_REG32R)
 658    "6" 6 bit unsigned break code (MIPS16OP_*_IMM6)
 659    "a" 26 bit jump address
 660    "e" 11 bit extension value
 661    "l" register list for entry instruction
 662    "L" register list for exit instruction
 663
 664    The remaining codes may be extended.  Except as otherwise noted,
 665    the full extended operand is a 16 bit signed value.
 666    "<" 3 bit unsigned shift count * 0 (MIPS16OP_*_RZ) (full 5 bit unsigned)
 667    ">" 3 bit unsigned shift count * 0 (MIPS16OP_*_RX) (full 5 bit unsigned)
 668    "[" 3 bit unsigned shift count * 0 (MIPS16OP_*_RZ) (full 6 bit unsigned)
 669    "]" 3 bit unsigned shift count * 0 (MIPS16OP_*_RX) (full 6 bit unsigned)
 670    "4" 4 bit signed immediate * 0 (MIPS16OP_*_IMM4) (full 15 bit signed)
 671    "5" 5 bit unsigned immediate * 0 (MIPS16OP_*_IMM5)
 672    "H" 5 bit unsigned immediate * 2 (MIPS16OP_*_IMM5)
 673    "W" 5 bit unsigned immediate * 4 (MIPS16OP_*_IMM5)
 674    "D" 5 bit unsigned immediate * 8 (MIPS16OP_*_IMM5)
 675    "j" 5 bit signed immediate * 0 (MIPS16OP_*_IMM5)
 676    "8" 8 bit unsigned immediate * 0 (MIPS16OP_*_IMM8)
 677    "V" 8 bit unsigned immediate * 4 (MIPS16OP_*_IMM8)
 678    "C" 8 bit unsigned immediate * 8 (MIPS16OP_*_IMM8)
 679    "U" 8 bit unsigned immediate * 0 (MIPS16OP_*_IMM8) (full 16 bit unsigned)
 680    "k" 8 bit signed immediate * 0 (MIPS16OP_*_IMM8)
 681    "K" 8 bit signed immediate * 8 (MIPS16OP_*_IMM8)
 682    "p" 8 bit conditional branch address (MIPS16OP_*_IMM8)
 683    "q" 11 bit branch address (MIPS16OP_*_IMM11)
 684    "A" 8 bit PC relative address * 4 (MIPS16OP_*_IMM8)
 685    "B" 5 bit PC relative address * 8 (MIPS16OP_*_IMM5)
 686    "E" 5 bit PC relative address * 4 (MIPS16OP_*_IMM5)
 687    */
 688
 689 /* For the mips16, we use the same opcode table format and a few of
 690    the same flags.  However, most of the flags are different.  */
 691
 692 /* Modifies the register in MIPS16OP_*_RX.  */
 693 #define MIPS16_INSN_WRITE_X                 0x00000001
 694 /* Modifies the register in MIPS16OP_*_RY.  */
 695 #define MIPS16_INSN_WRITE_Y                 0x00000002
 696 /* Modifies the register in MIPS16OP_*_RZ.  */
 697 #define MIPS16_INSN_WRITE_Z                 0x00000004
 698 /* Modifies the T ($24) register.  */
 699 #define MIPS16_INSN_WRITE_T                 0x00000008
 700 /* Modifies the SP ($29) register.  */
 701 #define MIPS16_INSN_WRITE_SP                0x00000010
 702 /* Modifies the RA ($31) register.  */
 703 #define MIPS16_INSN_WRITE_31                0x00000020
 704 /* Modifies the general purpose register in MIPS16OP_*_REG32R.  */
 705 #define MIPS16_INSN_WRITE_GPR_Y             0x00000040
 706 /* Reads the register in MIPS16OP_*_RX.  */
 707 #define MIPS16_INSN_READ_X                  0x00000080
 708 /* Reads the register in MIPS16OP_*_RY.  */
 709 #define MIPS16_INSN_READ_Y                  0x00000100
 710 /* Reads the register in MIPS16OP_*_MOVE32Z.  */
 711 #define MIPS16_INSN_READ_Z                  0x00000200
 712 /* Reads the T ($24) register.  */
 713 #define MIPS16_INSN_READ_T                  0x00000400
 714 /* Reads the SP ($29) register.  */
 715 #define MIPS16_INSN_READ_SP                 0x00000800
 716 /* Reads the RA ($31) register.  */
 717 #define MIPS16_INSN_READ_31                 0x00001000
 718 /* Reads the program counter.  */
 719 #define MIPS16_INSN_READ_PC                 0x00002000
 720 /* Reads the general purpose register in MIPS16OP_*_REGR32.  */
 721 #define MIPS16_INSN_READ_GPR_X              0x00004000
 722 /* Is a branch insn. */
 723 #define MIPS16_INSN_BRANCH                  0x00010000
 724
 725 /* The following flags have the same value for the mips16 opcode
 726    table:
 727    INSN_UNCOND_BRANCH_DELAY
 728    INSN_COND_BRANCH_DELAY
 729    INSN_COND_BRANCH_LIKELY (never used)
 730    INSN_READ_HI
 731    INSN_READ_LO
 732    INSN_WRITE_HI
 733    INSN_WRITE_LO
 734    INSN_TRAP
 735    INSN_ISA3
 736    */
 737
 738 extern const struct mips_opcode mips16_opcodes[];
 739 extern const int bfd_mips16_num_opcodes;
 740
 741 #endif /* _MIPS_H_ */