include/scsi/scsi_cmnd.h

   1 #ifndef _SCSI_SCSI_CMND_H
   2 #define _SCSI_SCSI_CMND_H
   3
   4 #include <linux/dma-mapping.h>
   5 #include <linux/blkdev.h>
   6 #include <linux/list.h>
   7 #include <linux/types.h>
   8 #include <linux/timer.h>
   9 #include <linux/scatterlist.h>
  10
  11 struct Scsi_Host;
  12 struct scsi_device;
  13 struct scsi_driver;
  14
  15 /*
  16  * MAX_COMMAND_SIZE is:
  17  * The longest fixed-length SCSI CDB as per the SCSI standard.
  18  * fixed-length means: commands that their size can be determined
  19  * by their opcode and the CDB does not carry a length specifier, (unlike
  20  * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
  21  * true and the SCSI standard also defines extended commands and
  22  * vendor specific commands that can be bigger than 16 bytes. The kernel
  23  * will support these using the same infrastructure used for VARLEN CDB's.
  24  * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
  25  * supports without specifying a cmd_len by ULD's
  26  */
  27 #define MAX_COMMAND_SIZE 16
  28 #if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
  29 # error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
  30 #endif
  31
  32 struct scsi_data_buffer {
  33         struct sg_table table;
  34         unsigned length;
  35         int resid;
  36 };
  37
  38 /* embedded in scsi_cmnd */
  39 struct scsi_pointer {
  40         char *ptr;              /* data pointer */
  41         int this_residual;      /* left in this buffer */
  42         struct scatterlist *buffer;     /* which buffer */
  43         int buffers_residual;   /* how many buffers left */
  44
  45         dma_addr_t dma_handle;
  46
  47         volatile int Status;
  48         volatile int Message;
  49         volatile int have_data_in;
  50         volatile int sent_command;
  51         volatile int phase;
  52 };
  53
  54 struct scsi_cmnd {
  55         struct scsi_device *device;
  56         struct list_head list;  /* scsi_cmnd participates in queue lists */
  57         struct list_head eh_entry; /* entry for the host eh_cmd_q */
  58         int eh_eflags;          /* Used by error handlr */
  59
  60         /*
  61          * A SCSI Command is assigned a nonzero serial_number before passed
  62          * to the driver's queue command function.  The serial_number is
  63          * cleared when scsi_done is entered indicating that the command
  64          * has been completed.  It is a bug for LLDDs to use this number
  65          * for purposes other than printk (and even that is only useful
  66          * for debugging).
  67          */
  68         unsigned long serial_number;
  69
  70         /*
  71          * This is set to jiffies as it was when the command was first
  72          * allocated.  It is used to time how long the command has
  73          * been outstanding
  74          */
  75         unsigned long jiffies_at_alloc;
  76
  77         int retries;
  78         int allowed;
  79
  80         unsigned char prot_op;
  81         unsigned char prot_type;
  82
  83         unsigned short cmd_len;
  84         enum dma_data_direction sc_data_direction;
  85
  86         /* These elements define the operation we are about to perform */
  87         unsigned char *cmnd;
  88
  89
  90         /* These elements define the operation we ultimately want to perform */
  91         struct scsi_data_buffer sdb;
  92         struct scsi_data_buffer *prot_sdb;
  93
  94         unsigned underflow;     /* Return error if less than
  95                                    this amount is transferred */
  96
  97         unsigned transfersize;  /* How much we are guaranteed to
  98                                    transfer with each SCSI transfer
  99                                    (ie, between disconnect /
 100                                    reconnects.   Probably == sector
 101                                    size */
 102
 103         struct request *request;        /* The command we are
 104                                            working on */
 105
 106 #define SCSI_SENSE_BUFFERSIZE   96
 107         unsigned char *sense_buffer;
 108                                 /* obtained by REQUEST SENSE when
 109                                  * CHECK CONDITION is received on original
 110                                  * command (auto-sense) */
 111
 112         /* Low-level done function - can be used by low-level driver to point
 113          *        to completion function.  Not used by mid/upper level code. */
 114         void (*scsi_done) (struct scsi_cmnd *);
 115
 116         /*
 117          * The following fields can be written to by the host specific code.
 118          * Everything else should be left alone.
 119          */
 120         struct scsi_pointer SCp;        /* Scratchpad used by some host adapters */
 121
 122         unsigned char *host_scribble;   /* The host adapter is allowed to
 123                                          * call scsi_malloc and get some memory
 124                                          * and hang it here.  The host adapter
 125                                          * is also expected to call scsi_free
 126                                          * to release this memory.  (The memory
 127                                          * obtained by scsi_malloc is guaranteed
 128                                          * to be at an address < 16Mb). */
 129
 130         int result;             /* Status code from lower level driver */
 131
 132         unsigned char tag;      /* SCSI-II queued command tag */
 133 };
 134
 135 static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
 136 {
 137         if (!cmd->request->rq_disk)
 138                 return NULL;
 139
 140         return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
 141 }
 142
 143 extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
 144 extern struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *, gfp_t);
 145 extern void scsi_put_command(struct scsi_cmnd *);
 146 extern void __scsi_put_command(struct Scsi_Host *, struct scsi_cmnd *,
 147                                struct device *);
 148 extern void scsi_finish_command(struct scsi_cmnd *cmd);
 149
 150 extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
 151                                  size_t *offset, size_t *len);
 152 extern void scsi_kunmap_atomic_sg(void *virt);
 153
 154 extern int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask);
 155 extern void scsi_release_buffers(struct scsi_cmnd *cmd);
 156
 157 extern int scsi_dma_map(struct scsi_cmnd *cmd);
 158 extern void scsi_dma_unmap(struct scsi_cmnd *cmd);
 159
 160 struct scsi_cmnd *scsi_allocate_command(gfp_t gfp_mask);
 161 void scsi_free_command(gfp_t gfp_mask, struct scsi_cmnd *cmd);
 162
 163 static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
 164 {
 165         return cmd->sdb.table.nents;
 166 }
 167
 168 static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd)
 169 {
 170         return cmd->sdb.table.sgl;
 171 }
 172
 173 static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd)
 174 {
 175         return cmd->sdb.length;
 176 }
 177
 178 static inline void scsi_set_resid(struct scsi_cmnd *cmd, int resid)
 179 {
 180         cmd->sdb.resid = resid;
 181 }
 182
 183 static inline int scsi_get_resid(struct scsi_cmnd *cmd)
 184 {
 185         return cmd->sdb.resid;
 186 }
 187
 188 #define scsi_for_each_sg(cmd, sg, nseg, __i)                    \
 189         for_each_sg(scsi_sglist(cmd), sg, nseg, __i)
 190
 191 static inline int scsi_bidi_cmnd(struct scsi_cmnd *cmd)
 192 {
 193         return blk_bidi_rq(cmd->request) &&
 194                 (cmd->request->next_rq->special != NULL);
 195 }
 196
 197 static inline struct scsi_data_buffer *scsi_in(struct scsi_cmnd *cmd)
 198 {
 199         return scsi_bidi_cmnd(cmd) ?
 200                 cmd->request->next_rq->special : &cmd->sdb;
 201 }
 202
 203 static inline struct scsi_data_buffer *scsi_out(struct scsi_cmnd *cmd)
 204 {
 205         return &cmd->sdb;
 206 }
 207
 208 static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
 209                                            void *buf, int buflen)
 210 {
 211         return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
 212                                    buf, buflen);
 213 }
 214
 215 static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
 216                                          void *buf, int buflen)
 217 {
 218         return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
 219                                  buf, buflen);
 220 }
 221
 222 /*
 223  * The operations below are hints that tell the controller driver how
 224  * to handle I/Os with DIF or similar types of protection information.
 225  */
 226 enum scsi_prot_operations {
 227         /* Normal I/O */
 228         SCSI_PROT_NORMAL = 0,
 229
 230         /* OS-HBA: Protected, HBA-Target: Unprotected */
 231         SCSI_PROT_READ_INSERT,
 232         SCSI_PROT_WRITE_STRIP,
 233
 234         /* OS-HBA: Unprotected, HBA-Target: Protected */
 235         SCSI_PROT_READ_STRIP,
 236         SCSI_PROT_WRITE_INSERT,
 237
 238         /* OS-HBA: Protected, HBA-Target: Protected */
 239         SCSI_PROT_READ_PASS,
 240         SCSI_PROT_WRITE_PASS,
 241 };
 242
 243 static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
 244 {
 245         scmd->prot_op = op;
 246 }
 247
 248 static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
 249 {
 250         return scmd->prot_op;
 251 }
 252
 253 /*
 254  * The controller usually does not know anything about the target it
 255  * is communicating with.  However, when DIX is enabled the controller
 256  * must be know target type so it can verify the protection
 257  * information passed along with the I/O.
 258  */
 259 enum scsi_prot_target_type {
 260         SCSI_PROT_DIF_TYPE0 = 0,
 261         SCSI_PROT_DIF_TYPE1,
 262         SCSI_PROT_DIF_TYPE2,
 263         SCSI_PROT_DIF_TYPE3,
 264 };
 265
 266 static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
 267 {
 268         scmd->prot_type = type;
 269 }
 270
 271 static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
 272 {
 273         return scmd->prot_type;
 274 }
 275
 276 static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
 277 {
 278         return blk_rq_pos(scmd->request);
 279 }
 280
 281 static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
 282 {
 283         return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
 284 }
 285
 286 static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
 287 {
 288         return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
 289 }
 290
 291 static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
 292 {
 293         return cmd->prot_sdb;
 294 }
 295
 296 #define scsi_for_each_prot_sg(cmd, sg, nseg, __i)               \
 297         for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
 298
 299 static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
 300 {
 301         cmd->result = (cmd->result & 0xffff00ff) | (status << 8);
 302 }
 303
 304 static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
 305 {
 306         cmd->result = (cmd->result & 0xff00ffff) | (status << 16);
 307 }
 308
 309 static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
 310 {
 311         cmd->result = (cmd->result & 0x00ffffff) | (status << 24);
 312 }
 313
 314 #endif /* _SCSI_SCSI_CMND_H */