include/scsi/scsi_device.h

   1 #ifndef _SCSI_SCSI_DEVICE_H
   2 #define _SCSI_SCSI_DEVICE_H
   3
   4 #include <linux/list.h>
   5 #include <linux/spinlock.h>
   6 #include <linux/workqueue.h>
   7 #include <linux/blkdev.h>
   8 #include <scsi/scsi.h>
   9 #include <linux/atomic.h>
  10
  11 struct device;
  12 struct request_queue;
  13 struct scsi_cmnd;
  14 struct scsi_lun;
  15 struct scsi_sense_hdr;
  16
  17 struct scsi_mode_data {
  18         __u32   length;
  19         __u16   block_descriptor_length;
  20         __u8    medium_type;
  21         __u8    device_specific;
  22         __u8    header_length;
  23         __u8    longlba:1;
  24 };
  25
  26 /*
  27  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
  28  * (for the ascii descriptions) and the state model enforcer:
  29  * scsi_lib:scsi_device_set_state().
  30  */
  31 enum scsi_device_state {
  32         SDEV_CREATED = 1,       /* device created but not added to sysfs
  33                                  * Only internal commands allowed (for inq) */
  34         SDEV_RUNNING,           /* device properly configured
  35                                  * All commands allowed */
  36         SDEV_CANCEL,            /* beginning to delete device
  37                                  * Only error handler commands allowed */
  38         SDEV_DEL,               /* device deleted
  39                                  * no commands allowed */
  40         SDEV_QUIESCE,           /* Device quiescent.  No block commands
  41                                  * will be accepted, only specials (which
  42                                  * originate in the mid-layer) */
  43         SDEV_OFFLINE,           /* Device offlined (by error handling or
  44                                  * user request */
  45         SDEV_BLOCK,             /* Device blocked by scsi lld.  No
  46                                  * scsi commands from user or midlayer
  47                                  * should be issued to the scsi
  48                                  * lld. */
  49         SDEV_CREATED_BLOCK,     /* same as above but for created devices */
  50 };
  51
  52 enum scsi_device_event {
  53         SDEV_EVT_MEDIA_CHANGE   = 1,    /* media has changed */
  54
  55         SDEV_EVT_LAST           = SDEV_EVT_MEDIA_CHANGE,
  56         SDEV_EVT_MAXBITS        = SDEV_EVT_LAST + 1
  57 };
  58
  59 struct scsi_event {
  60         enum scsi_device_event  evt_type;
  61         struct list_head        node;
  62
  63         /* put union of data structures, for non-simple event types,
  64          * here
  65          */
  66 };
  67
  68 struct scsi_device {
  69         struct Scsi_Host *host;
  70         struct request_queue *request_queue;
  71
  72         /* the next two are protected by the host->host_lock */
  73         struct list_head    siblings;   /* list of all devices on this host */
  74         struct list_head    same_target_siblings; /* just the devices sharing same target id */
  75
  76         /* this is now protected by the request_queue->queue_lock */
  77         unsigned int device_busy;       /* commands actually active on
  78                                          * low-level. protected by queue_lock. */
  79         spinlock_t list_lock;
  80         struct list_head cmd_list;      /* queue of in use SCSI Command structures */
  81         struct list_head starved_entry;
  82         struct scsi_cmnd *current_cmnd; /* currently active command */
  83         unsigned short queue_depth;     /* How deep of a queue we want */
  84         unsigned short max_queue_depth; /* max queue depth */
  85         unsigned short last_queue_full_depth; /* These two are used by */
  86         unsigned short last_queue_full_count; /* scsi_track_queue_full() */
  87         unsigned long last_queue_full_time;     /* last queue full time */
  88         unsigned long queue_ramp_up_period;     /* ramp up period in jiffies */
  89 #define SCSI_DEFAULT_RAMP_UP_PERIOD     (120 * HZ)
  90
  91         unsigned long last_queue_ramp_up;       /* last queue ramp up time */
  92
  93         unsigned int id, lun, channel;
  94
  95         unsigned int manufacturer;      /* Manufacturer of device, for using
  96                                          * vendor-specific cmd's */
  97         unsigned sector_size;   /* size in bytes */
  98
  99         void *hostdata;         /* available to low-level driver */
 100         char type;
 101         char scsi_level;
 102         char inq_periph_qual;   /* PQ from INQUIRY data */
 103         unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
 104         unsigned char * inquiry;        /* INQUIRY response data */
 105         const char * vendor;            /* [back_compat] point into 'inquiry' ... */
 106         const char * model;             /* ... after scan; point to static string */
 107         const char * rev;               /* ... "nullnullnullnull" before scan */
 108         unsigned char current_tag;      /* current tag */
 109         struct scsi_target      *sdev_target;   /* used only for single_lun */
 110
 111         unsigned int    sdev_bflags; /* black/white flags as also found in
 112                                  * scsi_devinfo.[hc]. For now used only to
 113                                  * pass settings from slave_alloc to scsi
 114                                  * core. */
 115         unsigned writeable:1;
 116         unsigned removable:1;
 117         unsigned changed:1;     /* Data invalid due to media change */
 118         unsigned busy:1;        /* Used to prevent races */
 119         unsigned lockable:1;    /* Able to prevent media removal */
 120         unsigned locked:1;      /* Media removal disabled */
 121         unsigned borken:1;      /* Tell the Seagate driver to be
 122                                  * painfully slow on this device */
 123         unsigned disconnect:1;  /* can disconnect */
 124         unsigned soft_reset:1;  /* Uses soft reset option */
 125         unsigned sdtr:1;        /* Device supports SDTR messages */
 126         unsigned wdtr:1;        /* Device supports WDTR messages */
 127         unsigned ppr:1;         /* Device supports PPR messages */
 128         unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
 129         unsigned simple_tags:1; /* simple queue tag messages are enabled */
 130         unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
 131         unsigned was_reset:1;   /* There was a bus reset on the bus for
 132                                  * this device */
 133         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
 134                                      * because we did a bus reset. */
 135         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
 136         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
 137         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
 138         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
 139         unsigned skip_vpd_pages:1;      /* do not read VPD pages */
 140         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
 141         unsigned no_start_on_add:1;     /* do not issue start on add */
 142         unsigned allow_restart:1; /* issue START_UNIT in error handler */
 143         unsigned manage_start_stop:1;   /* Let HLD (sd) manage start/stop */
 144         unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
 145         unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
 146         unsigned select_no_atn:1;
 147         unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
 148         unsigned guess_capacity:1;      /* READ_CAPACITY might be too high by 1 */
 149         unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
 150         unsigned last_sector_bug:1;     /* do not use multisector accesses on
 151                                            SD_LAST_BUGGY_SECTORS */
 152         unsigned no_read_disc_info:1;   /* Avoid READ_DISC_INFO cmds */
 153         unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
 154         unsigned is_visible:1;  /* is the device visible in sysfs */
 155
 156         DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
 157         struct list_head event_list;    /* asserted events */
 158         struct work_struct event_work;
 159
 160         unsigned int device_blocked;    /* Device returned QUEUE_FULL. */
 161
 162         unsigned int max_device_blocked; /* what device_blocked counts down from  */
 163 #define SCSI_DEFAULT_DEVICE_BLOCKED     3
 164
 165         atomic_t iorequest_cnt;
 166         atomic_t iodone_cnt;
 167         atomic_t ioerr_cnt;
 168
 169         struct device           sdev_gendev,
 170                                 sdev_dev;
 171
 172         struct execute_work     ew; /* used to get process context on put */
 173         struct work_struct      requeue_work;
 174
 175         struct scsi_dh_data     *scsi_dh_data;
 176         enum scsi_device_state sdev_state;
 177         unsigned long           sdev_data[0];
 178 } __attribute__((aligned(sizeof(unsigned long))));
 179
 180 struct scsi_dh_devlist {
 181         char *vendor;
 182         char *model;
 183 };
 184
 185 typedef void (*activate_complete)(void *, int);
 186 struct scsi_device_handler {
 187         /* Used by the infrastructure */
 188         struct list_head list; /* list of scsi_device_handlers */
 189
 190         /* Filled by the hardware handler */
 191         struct module *module;
 192         const char *name;
 193         const struct scsi_dh_devlist *devlist;
 194         int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
 195         int (*attach)(struct scsi_device *);
 196         void (*detach)(struct scsi_device *);
 197         int (*activate)(struct scsi_device *, activate_complete, void *);
 198         int (*prep_fn)(struct scsi_device *, struct request *);
 199         int (*set_params)(struct scsi_device *, const char *);
 200         bool (*match)(struct scsi_device *);
 201 };
 202
 203 struct scsi_dh_data {
 204         struct scsi_device_handler *scsi_dh;
 205         struct scsi_device *sdev;
 206         struct kref kref;
 207         char buf[0];
 208 };
 209
 210 #define to_scsi_device(d)       \
 211         container_of(d, struct scsi_device, sdev_gendev)
 212 #define class_to_sdev(d)        \
 213         container_of(d, struct scsi_device, sdev_dev)
 214 #define transport_class_to_sdev(class_dev) \
 215         to_scsi_device(class_dev->parent)
 216
 217 #define sdev_printk(prefix, sdev, fmt, a...)    \
 218         dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
 219
 220 #define scmd_printk(prefix, scmd, fmt, a...)                            \
 221         (scmd)->request->rq_disk ?                                      \
 222         sdev_printk(prefix, (scmd)->device, "[%s] " fmt,                \
 223                     (scmd)->request->rq_disk->disk_name, ##a) :         \
 224         sdev_printk(prefix, (scmd)->device, fmt, ##a)
 225
 226 enum scsi_target_state {
 227         STARGET_CREATED = 1,
 228         STARGET_RUNNING,
 229         STARGET_DEL,
 230 };
 231
 232 /*
 233  * scsi_target: representation of a scsi target, for now, this is only
 234  * used for single_lun devices. If no one has active IO to the target,
 235  * starget_sdev_user is NULL, else it points to the active sdev.
 236  */
 237 struct scsi_target {
 238         struct scsi_device      *starget_sdev_user;
 239         struct list_head        siblings;
 240         struct list_head        devices;
 241         struct device           dev;
 242         unsigned int            reap_ref; /* protected by the host lock */
 243         unsigned int            channel;
 244         unsigned int            id; /* target id ... replace
 245                                      * scsi_device.id eventually */
 246         unsigned int            create:1; /* signal that it needs to be added */
 247         unsigned int            single_lun:1;   /* Indicates we should only
 248                                                  * allow I/O to one of the luns
 249                                                  * for the device at a time. */
 250         unsigned int            pdt_1f_for_no_lun:1;    /* PDT = 0x1f
 251                                                  * means no lun present. */
 252         unsigned int            no_report_luns:1;       /* Don't use
 253                                                  * REPORT LUNS for scanning. */
 254         /* commands actually active on LLD. protected by host lock. */
 255         unsigned int            target_busy;
 256         /*
 257          * LLDs should set this in the slave_alloc host template callout.
 258          * If set to zero then there is not limit.
 259          */
 260         unsigned int            can_queue;
 261         unsigned int            target_blocked;
 262         unsigned int            max_target_blocked;
 263 #define SCSI_DEFAULT_TARGET_BLOCKED     3
 264
 265         char                    scsi_level;
 266         struct execute_work     ew;
 267         enum scsi_target_state  state;
 268         void                    *hostdata; /* available to low-level driver */
 269         unsigned long           starget_data[0]; /* for the transport */
 270         /* starget_data must be the last element!!!! */
 271 } __attribute__((aligned(sizeof(unsigned long))));
 272
 273 #define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
 274 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
 275 {
 276         return to_scsi_target(sdev->sdev_gendev.parent);
 277 }
 278 #define transport_class_to_starget(class_dev) \
 279         to_scsi_target(class_dev->parent)
 280
 281 #define starget_printk(prefix, starget, fmt, a...)      \
 282         dev_printk(prefix, &(starget)->dev, fmt, ##a)
 283
 284 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
 285                 uint, uint, uint, void *hostdata);
 286 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
 287                            uint target, uint lun);
 288 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
 289 extern void scsi_remove_device(struct scsi_device *);
 290 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
 291
 292 extern int scsi_device_get(struct scsi_device *);
 293 extern void scsi_device_put(struct scsi_device *);
 294 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
 295                                               uint, uint, uint);
 296 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
 297                                                 uint, uint, uint);
 298 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
 299                                                         uint);
 300 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
 301                                                           uint);
 302 extern void starget_for_each_device(struct scsi_target *, void *,
 303                      void (*fn)(struct scsi_device *, void *));
 304 extern void __starget_for_each_device(struct scsi_target *, void *,
 305                                       void (*fn)(struct scsi_device *,
 306                                                  void *));
 307
 308 /* only exposed to implement shost_for_each_device */
 309 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
 310                                                   struct scsi_device *);
 311
 312 /**
 313  * shost_for_each_device - iterate over all devices of a host
 314  * @sdev: the &struct scsi_device to use as a cursor
 315  * @shost: the &struct scsi_host to iterate over
 316  *
 317  * Iterator that returns each device attached to @shost.  This loop
 318  * takes a reference on each device and releases it at the end.  If
 319  * you break out of the loop, you must call scsi_device_put(sdev).
 320  */
 321 #define shost_for_each_device(sdev, shost) \
 322         for ((sdev) = __scsi_iterate_devices((shost), NULL); \
 323              (sdev); \
 324              (sdev) = __scsi_iterate_devices((shost), (sdev)))
 325
 326 /**
 327  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
 328  * @sdev: the &struct scsi_device to use as a cursor
 329  * @shost: the &struct scsi_host to iterate over
 330  *
 331  * Iterator that returns each device attached to @shost.  It does _not_
 332  * take a reference on the scsi_device, so the whole loop must be
 333  * protected by shost->host_lock.
 334  *
 335  * Note: The only reason to use this is because you need to access the
 336  * device list in interrupt context.  Otherwise you really want to use
 337  * shost_for_each_device instead.
 338  */
 339 #define __shost_for_each_device(sdev, shost) \
 340         list_for_each_entry((sdev), &((shost)->__devices), siblings)
 341
 342 extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
 343 extern int scsi_track_queue_full(struct scsi_device *, int);
 344
 345 extern int scsi_set_medium_removal(struct scsi_device *, char);
 346
 347 extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 348                            unsigned char *buffer, int len, int timeout,
 349                            int retries, struct scsi_mode_data *data,
 350                            struct scsi_sense_hdr *);
 351 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
 352                             int modepage, unsigned char *buffer, int len,
 353                             int timeout, int retries,
 354                             struct scsi_mode_data *data,
 355                             struct scsi_sense_hdr *);
 356 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
 357                                 int retries, struct scsi_sense_hdr *sshdr);
 358 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
 359                              int buf_len);
 360 extern int scsi_device_set_state(struct scsi_device *sdev,
 361                                  enum scsi_device_state state);
 362 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
 363                                           gfp_t gfpflags);
 364 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
 365 extern void sdev_evt_send_simple(struct scsi_device *sdev,
 366                           enum scsi_device_event evt_type, gfp_t gfpflags);
 367 extern int scsi_device_quiesce(struct scsi_device *sdev);
 368 extern void scsi_device_resume(struct scsi_device *sdev);
 369 extern void scsi_target_quiesce(struct scsi_target *);
 370 extern void scsi_target_resume(struct scsi_target *);
 371 extern void scsi_scan_target(struct device *parent, unsigned int channel,
 372                              unsigned int id, unsigned int lun, int rescan);
 373 extern void scsi_target_reap(struct scsi_target *);
 374 extern void scsi_target_block(struct device *);
 375 extern void scsi_target_unblock(struct device *);
 376 extern void scsi_remove_target(struct device *);
 377 extern void int_to_scsilun(unsigned int, struct scsi_lun *);
 378 extern int scsilun_to_int(struct scsi_lun *);
 379 extern const char *scsi_device_state_name(enum scsi_device_state);
 380 extern int scsi_is_sdev_device(const struct device *);
 381 extern int scsi_is_target_device(const struct device *);
 382 extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 383                         int data_direction, void *buffer, unsigned bufflen,
 384                         unsigned char *sense, int timeout, int retries,
 385                         int flag, int *resid);
 386 extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
 387                             int data_direction, void *buffer, unsigned bufflen,
 388                             struct scsi_sense_hdr *, int timeout, int retries,
 389                             int *resid);
 390
 391 #ifdef CONFIG_PM_RUNTIME
 392 extern int scsi_autopm_get_device(struct scsi_device *);
 393 extern void scsi_autopm_put_device(struct scsi_device *);
 394 #else
 395 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
 396 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
 397 #endif /* CONFIG_PM_RUNTIME */
 398
 399 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
 400 {
 401         return device_reprobe(&sdev->sdev_gendev);
 402 }
 403
 404 static inline unsigned int sdev_channel(struct scsi_device *sdev)
 405 {
 406         return sdev->channel;
 407 }
 408
 409 static inline unsigned int sdev_id(struct scsi_device *sdev)
 410 {
 411         return sdev->id;
 412 }
 413
 414 #define scmd_id(scmd) sdev_id((scmd)->device)
 415 #define scmd_channel(scmd) sdev_channel((scmd)->device)
 416
 417 /*
 418  * checks for positions of the SCSI state machine
 419  */
 420 static inline int scsi_device_online(struct scsi_device *sdev)
 421 {
 422         return (sdev->sdev_state != SDEV_OFFLINE &&
 423                 sdev->sdev_state != SDEV_DEL);
 424 }
 425 static inline int scsi_device_blocked(struct scsi_device *sdev)
 426 {
 427         return sdev->sdev_state == SDEV_BLOCK ||
 428                 sdev->sdev_state == SDEV_CREATED_BLOCK;
 429 }
 430 static inline int scsi_device_created(struct scsi_device *sdev)
 431 {
 432         return sdev->sdev_state == SDEV_CREATED ||
 433                 sdev->sdev_state == SDEV_CREATED_BLOCK;
 434 }
 435
 436 /* accessor functions for the SCSI parameters */
 437 static inline int scsi_device_sync(struct scsi_device *sdev)
 438 {
 439         return sdev->sdtr;
 440 }
 441 static inline int scsi_device_wide(struct scsi_device *sdev)
 442 {
 443         return sdev->wdtr;
 444 }
 445 static inline int scsi_device_dt(struct scsi_device *sdev)
 446 {
 447         return sdev->ppr;
 448 }
 449 static inline int scsi_device_dt_only(struct scsi_device *sdev)
 450 {
 451         if (sdev->inquiry_len < 57)
 452                 return 0;
 453         return (sdev->inquiry[56] & 0x0c) == 0x04;
 454 }
 455 static inline int scsi_device_ius(struct scsi_device *sdev)
 456 {
 457         if (sdev->inquiry_len < 57)
 458                 return 0;
 459         return sdev->inquiry[56] & 0x01;
 460 }
 461 static inline int scsi_device_qas(struct scsi_device *sdev)
 462 {
 463         if (sdev->inquiry_len < 57)
 464                 return 0;
 465         return sdev->inquiry[56] & 0x02;
 466 }
 467 static inline int scsi_device_enclosure(struct scsi_device *sdev)
 468 {
 469         return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
 470 }
 471
 472 static inline int scsi_device_protection(struct scsi_device *sdev)
 473 {
 474         return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
 475 }
 476
 477 static inline int scsi_device_tpgs(struct scsi_device *sdev)
 478 {
 479         return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
 480 }
 481
 482 #define MODULE_ALIAS_SCSI_DEVICE(type) \
 483         MODULE_ALIAS("scsi:t-" __stringify(type) "*")
 484 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
 485
 486 #endif /* _SCSI_SCSI_DEVICE_H */