Merge tag 'ux500-defconfig-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel...

[deliverable/linux.git] / kernel / irq / irqdomain.c

#define pr_fmt(fmt)  "irq: " fmt

#include <linux/debugfs.h>
#include <linux/hardirq.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/topology.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/fs.h>

static LIST_HEAD(irq_domain_list);
static DEFINE_MUTEX(irq_domain_mutex);

static DEFINE_MUTEX(revmap_trees_mutex);
static struct irq_domain *irq_default_domain;

/**
 * irq_domain_alloc() - Allocate a new irq_domain data structure
 * @of_node: optional device-tree node of the interrupt controller
 * @revmap_type: type of reverse mapping to use
 * @ops: map/unmap domain callbacks
 * @host_data: Controller private data pointer
 *
 * Allocates and initialize and irq_domain structure.  Caller is expected to
 * register allocated irq_domain with irq_domain_register().  Returns pointer
 * to IRQ domain, or NULL on failure.
 */
static struct irq_domain *irq_domain_alloc(struct device_node *of_node,
                                           unsigned int revmap_type,
                                           const struct irq_domain_ops *ops,
                                           void *host_data)
{
        struct irq_domain *domain;

        domain = kzalloc_node(sizeof(*domain), GFP_KERNEL,
                              of_node_to_nid(of_node));
        if (WARN_ON(!domain))
                return NULL;

        /* Fill structure */
        domain->revmap_type = revmap_type;
        domain->ops = ops;
        domain->host_data = host_data;
        domain->of_node = of_node_get(of_node);

        return domain;
}

static void irq_domain_free(struct irq_domain *domain)
{
        of_node_put(domain->of_node);
        kfree(domain);
}

static void irq_domain_add(struct irq_domain *domain)
{
        mutex_lock(&irq_domain_mutex);
        list_add(&domain->link, &irq_domain_list);
        mutex_unlock(&irq_domain_mutex);
        pr_debug("Allocated domain of type %d @0x%p\n",
                 domain->revmap_type, domain);
}

/**
 * irq_domain_remove() - Remove an irq domain.
 * @domain: domain to remove
 *
 * This routine is used to remove an irq domain. The caller must ensure
 * that all mappings within the domain have been disposed of prior to
 * use, depending on the revmap type.
 */
void irq_domain_remove(struct irq_domain *domain)
{
        mutex_lock(&irq_domain_mutex);

        switch (domain->revmap_type) {
        case IRQ_DOMAIN_MAP_LEGACY:
                /*
                 * Legacy domains don't manage their own irq_desc
                 * allocations, we expect the caller to handle irq_desc
                 * freeing on their own.
                 */
                break;
        case IRQ_DOMAIN_MAP_TREE:
                /*
                 * radix_tree_delete() takes care of destroying the root
                 * node when all entries are removed. Shout if there are
                 * any mappings left.
                 */
                WARN_ON(domain->revmap_data.tree.height);
                break;
        case IRQ_DOMAIN_MAP_LINEAR:
                kfree(domain->revmap_data.linear.revmap);
                domain->revmap_data.linear.size = 0;
                break;
        case IRQ_DOMAIN_MAP_NOMAP:
                break;
        }

        list_del(&domain->link);

        /*
         * If the going away domain is the default one, reset it.
         */
        if (unlikely(irq_default_domain == domain))
                irq_set_default_host(NULL);

        mutex_unlock(&irq_domain_mutex);

        pr_debug("Removed domain of type %d @0x%p\n",
                 domain->revmap_type, domain);

        irq_domain_free(domain);
}
EXPORT_SYMBOL_GPL(irq_domain_remove);

static unsigned int irq_domain_legacy_revmap(struct irq_domain *domain,
                                             irq_hw_number_t hwirq)
{
        irq_hw_number_t first_hwirq = domain->revmap_data.legacy.first_hwirq;
        int size = domain->revmap_data.legacy.size;

        if (WARN_ON(hwirq < first_hwirq || hwirq >= first_hwirq + size))
                return 0;
        return hwirq - first_hwirq + domain->revmap_data.legacy.first_irq;
}

/**
 * irq_domain_add_simple() - Allocate and register a simple irq_domain.
 * @of_node: pointer to interrupt controller's device tree node.
 * @size: total number of irqs in mapping
 * @first_irq: first number of irq block assigned to the domain,
 *      pass zero to assign irqs on-the-fly. This will result in a
 *      linear IRQ domain so it is important to use irq_create_mapping()
 *      for each used IRQ, especially when SPARSE_IRQ is enabled.
 * @ops: map/unmap domain callbacks
 * @host_data: Controller private data pointer
 *
 * Allocates a legacy irq_domain if irq_base is positive or a linear
 * domain otherwise. For the legacy domain, IRQ descriptors will also
 * be allocated.
 *
 * This is intended to implement the expected behaviour for most
 * interrupt controllers which is that a linear mapping should
 * normally be used unless the system requires a legacy mapping in
 * order to support supplying interrupt numbers during non-DT
 * registration of devices.
 */
struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
                                         unsigned int size,
                                         unsigned int first_irq,
                                         const struct irq_domain_ops *ops,
                                         void *host_data)
{
        if (first_irq > 0) {
                int irq_base;

                if (IS_ENABLED(CONFIG_SPARSE_IRQ)) {
                        /*
                         * Set the descriptor allocator to search for a
                         * 1-to-1 mapping, such as irq_alloc_desc_at().
                         * Use of_node_to_nid() which is defined to
                         * numa_node_id() on platforms that have no custom
                         * implementation.
                         */
                        irq_base = irq_alloc_descs(first_irq, first_irq, size,
                                                   of_node_to_nid(of_node));
                        if (irq_base < 0) {
                                pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
                                        first_irq);
                                irq_base = first_irq;
                        }
                } else
                        irq_base = first_irq;

                return irq_domain_add_legacy(of_node, size, irq_base, 0,
                                             ops, host_data);
        }

        /* A linear domain is the default */
        return irq_domain_add_linear(of_node, size, ops, host_data);
}
EXPORT_SYMBOL_GPL(irq_domain_add_simple);

/**
 * irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain.
 * @of_node: pointer to interrupt controller's device tree node.
 * @size: total number of irqs in legacy mapping
 * @first_irq: first number of irq block assigned to the domain
 * @first_hwirq: first hwirq number to use for the translation. Should normally
 *               be '0', but a positive integer can be used if the effective
 *               hwirqs numbering does not begin at zero.
 * @ops: map/unmap domain callbacks
 * @host_data: Controller private data pointer
 *
 * Note: the map() callback will be called before this function returns
 * for all legacy interrupts except 0 (which is always the invalid irq for
 * a legacy controller).
 */
struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
                                         unsigned int size,
                                         unsigned int first_irq,
                                         irq_hw_number_t first_hwirq,
                                         const struct irq_domain_ops *ops,
                                         void *host_data)
{
        struct irq_domain *domain;
        unsigned int i;

        domain = irq_domain_alloc(of_node, IRQ_DOMAIN_MAP_LEGACY, ops, host_data);
        if (!domain)
                return NULL;

        domain->revmap_data.legacy.first_irq = first_irq;
        domain->revmap_data.legacy.first_hwirq = first_hwirq;
        domain->revmap_data.legacy.size = size;

        mutex_lock(&irq_domain_mutex);
        /* Verify that all the irqs are available */
        for (i = 0; i < size; i++) {
                int irq = first_irq + i;
                struct irq_data *irq_data = irq_get_irq_data(irq);

                if (WARN_ON(!irq_data || irq_data->domain)) {
                        mutex_unlock(&irq_domain_mutex);
                        irq_domain_free(domain);
                        return NULL;
                }
        }

        /* Claim all of the irqs before registering a legacy domain */
        for (i = 0; i < size; i++) {
                struct irq_data *irq_data = irq_get_irq_data(first_irq + i);
                irq_data->hwirq = first_hwirq + i;
                irq_data->domain = domain;
        }
        mutex_unlock(&irq_domain_mutex);

        for (i = 0; i < size; i++) {
                int irq = first_irq + i;
                int hwirq = first_hwirq + i;

                /* IRQ0 gets ignored */
                if (!irq)
                        continue;

                /* Legacy flags are left to default at this point,
                 * one can then use irq_create_mapping() to
                 * explicitly change them
                 */
                if (ops->map)
                        ops->map(domain, irq, hwirq);

                /* Clear norequest flags */
                irq_clear_status_flags(irq, IRQ_NOREQUEST);
        }

        irq_domain_add(domain);
        return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_legacy);

/**
 * irq_domain_add_linear() - Allocate and register a linear revmap irq_domain.
 * @of_node: pointer to interrupt controller's device tree node.
 * @size: Number of interrupts in the domain.
 * @ops: map/unmap domain callbacks
 * @host_data: Controller private data pointer
 */
struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
                                         unsigned int size,
                                         const struct irq_domain_ops *ops,
                                         void *host_data)
{
        struct irq_domain *domain;
        unsigned int *revmap;

        revmap = kzalloc_node(sizeof(*revmap) * size, GFP_KERNEL,
                              of_node_to_nid(of_node));
        if (WARN_ON(!revmap))
                return NULL;

        domain = irq_domain_alloc(of_node, IRQ_DOMAIN_MAP_LINEAR, ops, host_data);
        if (!domain) {
                kfree(revmap);
                return NULL;
        }
        domain->revmap_data.linear.size = size;
        domain->revmap_data.linear.revmap = revmap;
        irq_domain_add(domain);
        return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_linear);

struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
                                         unsigned int max_irq,
                                         const struct irq_domain_ops *ops,
                                         void *host_data)
{
        struct irq_domain *domain = irq_domain_alloc(of_node,
                                        IRQ_DOMAIN_MAP_NOMAP, ops, host_data);
        if (domain) {
                domain->revmap_data.nomap.max_irq = max_irq ? max_irq : ~0;
                irq_domain_add(domain);
        }
        return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_nomap);

/**
 * irq_domain_add_tree()
 * @of_node: pointer to interrupt controller's device tree node.
 * @ops: map/unmap domain callbacks
 *
 * Note: The radix tree will be allocated later during boot automatically
 * (the reverse mapping will use the slow path until that happens).
 */
struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
                                         const struct irq_domain_ops *ops,
                                         void *host_data)
{
        struct irq_domain *domain = irq_domain_alloc(of_node,
                                        IRQ_DOMAIN_MAP_TREE, ops, host_data);
        if (domain) {
                INIT_RADIX_TREE(&domain->revmap_data.tree, GFP_KERNEL);
                irq_domain_add(domain);
        }
        return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_tree);

/**
 * irq_find_host() - Locates a domain for a given device node
 * @node: device-tree node of the interrupt controller
 */
struct irq_domain *irq_find_host(struct device_node *node)
{
        struct irq_domain *h, *found = NULL;
        int rc;

        /* We might want to match the legacy controller last since
         * it might potentially be set to match all interrupts in
         * the absence of a device node. This isn't a problem so far
         * yet though...
         */
        mutex_lock(&irq_domain_mutex);
        list_for_each_entry(h, &irq_domain_list, link) {
                if (h->ops->match)
                        rc = h->ops->match(h, node);
                else
                        rc = (h->of_node != NULL) && (h->of_node == node);

                if (rc) {
                        found = h;
                        break;
                }
        }
        mutex_unlock(&irq_domain_mutex);
        return found;
}
EXPORT_SYMBOL_GPL(irq_find_host);

/**
 * irq_set_default_host() - Set a "default" irq domain
 * @domain: default domain pointer
 *
 * For convenience, it's possible to set a "default" domain that will be used
 * whenever NULL is passed to irq_create_mapping(). It makes life easier for
 * platforms that want to manipulate a few hard coded interrupt numbers that
 * aren't properly represented in the device-tree.
 */
void irq_set_default_host(struct irq_domain *domain)
{
        pr_debug("Default domain set to @0x%p\n", domain);

        irq_default_domain = domain;
}
EXPORT_SYMBOL_GPL(irq_set_default_host);

static void irq_domain_disassociate_many(struct irq_domain *domain,
                                         unsigned int irq_base, int count)
{
        /*
         * disassociate in reverse order;
         * not strictly necessary, but nice for unwinding
         */
        while (count--) {
                int irq = irq_base + count;
                struct irq_data *irq_data = irq_get_irq_data(irq);
                irq_hw_number_t hwirq;

                if (WARN_ON(!irq_data || irq_data->domain != domain))
                        continue;

                hwirq = irq_data->hwirq;
                irq_set_status_flags(irq, IRQ_NOREQUEST);

                /* remove chip and handler */
                irq_set_chip_and_handler(irq, NULL, NULL);

                /* Make sure it's completed */
                synchronize_irq(irq);

                /* Tell the PIC about it */
                if (domain->ops->unmap)
                        domain->ops->unmap(domain, irq);
                smp_mb();

                irq_data->domain = NULL;
                irq_data->hwirq = 0;

                /* Clear reverse map */
                switch(domain->revmap_type) {
                case IRQ_DOMAIN_MAP_LINEAR:
                        if (hwirq < domain->revmap_data.linear.size)
                                domain->revmap_data.linear.revmap[hwirq] = 0;
                        break;
                case IRQ_DOMAIN_MAP_TREE:
                        mutex_lock(&revmap_trees_mutex);
                        radix_tree_delete(&domain->revmap_data.tree, hwirq);
                        mutex_unlock(&revmap_trees_mutex);
                        break;
                }
        }
}

int irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base,
                              irq_hw_number_t hwirq_base, int count)
{
        unsigned int virq = irq_base;
        irq_hw_number_t hwirq = hwirq_base;
        int i, ret;

        pr_debug("%s(%s, irqbase=%i, hwbase=%i, count=%i)\n", __func__,
                of_node_full_name(domain->of_node), irq_base, (int)hwirq_base, count);

        for (i = 0; i < count; i++) {
                struct irq_data *irq_data = irq_get_irq_data(virq + i);

                if (WARN(!irq_data, "error: irq_desc not allocated; "
                         "irq=%i hwirq=0x%x\n", virq + i, (int)hwirq + i))
                        return -EINVAL;
                if (WARN(irq_data->domain, "error: irq_desc already associated; "
                         "irq=%i hwirq=0x%x\n", virq + i, (int)hwirq + i))
                        return -EINVAL;
        };

        for (i = 0; i < count; i++, virq++, hwirq++) {
                struct irq_data *irq_data = irq_get_irq_data(virq);

                irq_data->hwirq = hwirq;
                irq_data->domain = domain;
                if (domain->ops->map) {
                        ret = domain->ops->map(domain, virq, hwirq);
                        if (ret != 0) {
                                /*
                                 * If map() returns -EPERM, this interrupt is protected
                                 * by the firmware or some other service and shall not
                                 * be mapped.
                                 *
                                 * Since on some platforms we blindly try to map everything
                                 * we end up with a log full of backtraces.
                                 *
                                 * So instead, we silently fail on -EPERM, it is the
                                 * responsibility of the PIC driver to display a relevant
                                 * message if needed.
                                 */
                                if (ret != -EPERM) {
                                        pr_err("irq-%i==>hwirq-0x%lx mapping failed: %d\n",
                                               virq, hwirq, ret);
                                        WARN_ON(1);
                                }
                                irq_data->domain = NULL;
                                irq_data->hwirq = 0;
                                goto err_unmap;
                        }
                }

                switch (domain->revmap_type) {
                case IRQ_DOMAIN_MAP_LINEAR:
                        if (hwirq < domain->revmap_data.linear.size)
                                domain->revmap_data.linear.revmap[hwirq] = virq;
                        break;
                case IRQ_DOMAIN_MAP_TREE:
                        mutex_lock(&revmap_trees_mutex);
                        radix_tree_insert(&domain->revmap_data.tree, hwirq, irq_data);
                        mutex_unlock(&revmap_trees_mutex);
                        break;
                }

                irq_clear_status_flags(virq, IRQ_NOREQUEST);
        }

        return 0;

 err_unmap:
        irq_domain_disassociate_many(domain, irq_base, i);
        return -EINVAL;
}
EXPORT_SYMBOL_GPL(irq_domain_associate_many);

/**
 * irq_create_direct_mapping() - Allocate an irq for direct mapping
 * @domain: domain to allocate the irq for or NULL for default domain
 *
 * This routine is used for irq controllers which can choose the hardware
 * interrupt numbers they generate. In such a case it's simplest to use
 * the linux irq as the hardware interrupt number.
 */
unsigned int irq_create_direct_mapping(struct irq_domain *domain)
{
        unsigned int virq;

        if (domain == NULL)
                domain = irq_default_domain;

        if (WARN_ON(!domain || domain->revmap_type != IRQ_DOMAIN_MAP_NOMAP))
                return 0;

        virq = irq_alloc_desc_from(1, of_node_to_nid(domain->of_node));
        if (!virq) {
                pr_debug("create_direct virq allocation failed\n");
                return 0;
        }
        if (virq >= domain->revmap_data.nomap.max_irq) {
                pr_err("ERROR: no free irqs available below %i maximum\n",
                        domain->revmap_data.nomap.max_irq);
                irq_free_desc(virq);
                return 0;
        }
        pr_debug("create_direct obtained virq %d\n", virq);

        if (irq_domain_associate(domain, virq, virq)) {
                irq_free_desc(virq);
                return 0;
        }

        return virq;
}
EXPORT_SYMBOL_GPL(irq_create_direct_mapping);

/**
 * irq_create_mapping() - Map a hardware interrupt into linux irq space
 * @domain: domain owning this hardware interrupt or NULL for default domain
 * @hwirq: hardware irq number in that domain space
 *
 * Only one mapping per hardware interrupt is permitted. Returns a linux
 * irq number.
 * If the sense/trigger is to be specified, set_irq_type() should be called
 * on the number returned from that call.
 */
unsigned int irq_create_mapping(struct irq_domain *domain,
                                irq_hw_number_t hwirq)
{
        unsigned int hint;
        int virq;

        pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq);

        /* Look for default domain if nececssary */
        if (domain == NULL)
                domain = irq_default_domain;
        if (domain == NULL) {
                pr_warning("irq_create_mapping called for"
                           " NULL domain, hwirq=%lx\n", hwirq);
                WARN_ON(1);
                return 0;
        }
        pr_debug("-> using domain @%p\n", domain);

        /* Check if mapping already exists */
        virq = irq_find_mapping(domain, hwirq);
        if (virq) {
                pr_debug("-> existing mapping on virq %d\n", virq);
                return virq;
        }

        /* Get a virtual interrupt number */
        if (domain->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
                return irq_domain_legacy_revmap(domain, hwirq);

        /* Allocate a virtual interrupt number */
        hint = hwirq % nr_irqs;
        if (hint == 0)
                hint++;
        virq = irq_alloc_desc_from(hint, of_node_to_nid(domain->of_node));
        if (virq <= 0)
                virq = irq_alloc_desc_from(1, of_node_to_nid(domain->of_node));
        if (virq <= 0) {
                pr_debug("-> virq allocation failed\n");
                return 0;
        }

        if (irq_domain_associate(domain, virq, hwirq)) {
                irq_free_desc(virq);
                return 0;
        }

        pr_debug("irq %lu on domain %s mapped to virtual irq %u\n",
                hwirq, of_node_full_name(domain->of_node), virq);

        return virq;
}
EXPORT_SYMBOL_GPL(irq_create_mapping);

/**
 * irq_create_strict_mappings() - Map a range of hw irqs to fixed linux irqs
 * @domain: domain owning the interrupt range
 * @irq_base: beginning of linux IRQ range
 * @hwirq_base: beginning of hardware IRQ range
 * @count: Number of interrupts to map
 *
 * This routine is used for allocating and mapping a range of hardware
 * irqs to linux irqs where the linux irq numbers are at pre-defined
 * locations. For use by controllers that already have static mappings
 * to insert in to the domain.
 *
 * Non-linear users can use irq_create_identity_mapping() for IRQ-at-a-time
 * domain insertion.
 *
 * 0 is returned upon success, while any failure to establish a static
 * mapping is treated as an error.
 */
int irq_create_strict_mappings(struct irq_domain *domain, unsigned int irq_base,
                               irq_hw_number_t hwirq_base, int count)
{
        int ret;

        ret = irq_alloc_descs(irq_base, irq_base, count,
                              of_node_to_nid(domain->of_node));
        if (unlikely(ret < 0))
                return ret;

        ret = irq_domain_associate_many(domain, irq_base, hwirq_base, count);
        if (unlikely(ret < 0)) {
                irq_free_descs(irq_base, count);
                return ret;
        }

        return 0;
}
EXPORT_SYMBOL_GPL(irq_create_strict_mappings);

unsigned int irq_create_of_mapping(struct device_node *controller,
                                   const u32 *intspec, unsigned int intsize)
{
        struct irq_domain *domain;
        irq_hw_number_t hwirq;
        unsigned int type = IRQ_TYPE_NONE;
        unsigned int virq;

        domain = controller ? irq_find_host(controller) : irq_default_domain;
        if (!domain) {
#ifdef CONFIG_MIPS
                /*
                 * Workaround to avoid breaking interrupt controller drivers
                 * that don't yet register an irq_domain.  This is temporary
                 * code. ~~~gcl, Feb 24, 2012
                 *
                 * Scheduled for removal in Linux v3.6.  That should be enough
                 * time.
                 */
                if (intsize > 0)
                        return intspec[0];
#endif
                pr_warning("no irq domain found for %s !\n",
                           of_node_full_name(controller));
                return 0;
        }

        /* If domain has no translation, then we assume interrupt line */
        if (domain->ops->xlate == NULL)
                hwirq = intspec[0];
        else {
                if (domain->ops->xlate(domain, controller, intspec, intsize,
                                     &hwirq, &type))
                        return 0;
        }

        /* Create mapping */
        virq = irq_create_mapping(domain, hwirq);
        if (!virq)
                return virq;

        /* Set type if specified and different than the current one */
        if (type != IRQ_TYPE_NONE &&
            type != irq_get_trigger_type(virq))
                irq_set_irq_type(virq, type);
        return virq;
}
EXPORT_SYMBOL_GPL(irq_create_of_mapping);

/**
 * irq_dispose_mapping() - Unmap an interrupt
 * @virq: linux irq number of the interrupt to unmap
 */
void irq_dispose_mapping(unsigned int virq)
{
        struct irq_data *irq_data = irq_get_irq_data(virq);
        struct irq_domain *domain;

        if (!virq || !irq_data)
                return;

        domain = irq_data->domain;
        if (WARN_ON(domain == NULL))
                return;

        /* Never unmap legacy interrupts */
        if (domain->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
                return;

        irq_domain_disassociate_many(domain, virq, 1);
        irq_free_desc(virq);
}
EXPORT_SYMBOL_GPL(irq_dispose_mapping);

/**
 * irq_find_mapping() - Find a linux irq from an hw irq number.
 * @domain: domain owning this hardware interrupt
 * @hwirq: hardware irq number in that domain space
 */
unsigned int irq_find_mapping(struct irq_domain *domain,
                              irq_hw_number_t hwirq)
{
        struct irq_data *data;

        /* Look for default domain if nececssary */
        if (domain == NULL)
                domain = irq_default_domain;
        if (domain == NULL)
                return 0;

        switch (domain->revmap_type) {
        case IRQ_DOMAIN_MAP_LEGACY:
                return irq_domain_legacy_revmap(domain, hwirq);
        case IRQ_DOMAIN_MAP_LINEAR:
                return irq_linear_revmap(domain, hwirq);
        case IRQ_DOMAIN_MAP_TREE:
                rcu_read_lock();
                data = radix_tree_lookup(&domain->revmap_data.tree, hwirq);
                rcu_read_unlock();
                if (data)
                        return data->irq;
                break;
        case IRQ_DOMAIN_MAP_NOMAP:
                data = irq_get_irq_data(hwirq);
                if (data && (data->domain == domain) && (data->hwirq == hwirq))
                        return hwirq;
                break;
        }

        return 0;
}
EXPORT_SYMBOL_GPL(irq_find_mapping);

/**
 * irq_linear_revmap() - Find a linux irq from a hw irq number.
 * @domain: domain owning this hardware interrupt
 * @hwirq: hardware irq number in that domain space
 *
 * This is a fast path that can be called directly by irq controller code to
 * save a handful of instructions.
 */
unsigned int irq_linear_revmap(struct irq_domain *domain,
                               irq_hw_number_t hwirq)
{
        BUG_ON(domain->revmap_type != IRQ_DOMAIN_MAP_LINEAR);

        /* Check revmap bounds; complain if exceeded */
        if (WARN_ON(hwirq >= domain->revmap_data.linear.size))
                return 0;

        return domain->revmap_data.linear.revmap[hwirq];
}
EXPORT_SYMBOL_GPL(irq_linear_revmap);

#ifdef CONFIG_IRQ_DOMAIN_DEBUG
static int virq_debug_show(struct seq_file *m, void *private)
{
        unsigned long flags;
        struct irq_desc *desc;
        const char *p;
        static const char none[] = "none";
        void *data;
        int i;

        seq_printf(m, "%-5s  %-7s  %-15s  %-*s  %s\n", "irq", "hwirq",
                      "chip name", (int)(2 * sizeof(void *) + 2), "chip data",
                      "domain name");

        for (i = 1; i < nr_irqs; i++) {
                desc = irq_to_desc(i);
                if (!desc)
                        continue;

                raw_spin_lock_irqsave(&desc->lock, flags);

                if (desc->action && desc->action->handler) {
                        struct irq_chip *chip;

                        seq_printf(m, "%5d  ", i);
                        seq_printf(m, "0x%05lx  ", desc->irq_data.hwirq);

                        chip = irq_desc_get_chip(desc);
                        if (chip && chip->name)
                                p = chip->name;
                        else
                                p = none;
                        seq_printf(m, "%-15s  ", p);

                        data = irq_desc_get_chip_data(desc);
                        seq_printf(m, data ? "0x%p  " : "  %p  ", data);

                        if (desc->irq_data.domain)
                                p = of_node_full_name(desc->irq_data.domain->of_node);
                        else
                                p = none;
                        seq_printf(m, "%s\n", p);
                }

                raw_spin_unlock_irqrestore(&desc->lock, flags);
        }

        return 0;
}

static int virq_debug_open(struct inode *inode, struct file *file)
{
        return single_open(file, virq_debug_show, inode->i_private);
}

static const struct file_operations virq_debug_fops = {
        .open = virq_debug_open,
        .read = seq_read,
        .llseek = seq_lseek,
        .release = single_release,
};

static int __init irq_debugfs_init(void)
{
        if (debugfs_create_file("irq_domain_mapping", S_IRUGO, NULL,
                                 NULL, &virq_debug_fops) == NULL)
                return -ENOMEM;

        return 0;
}
__initcall(irq_debugfs_init);
#endif /* CONFIG_IRQ_DOMAIN_DEBUG */

/**
 * irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
 *
 * Device Tree IRQ specifier translation function which works with one cell
 * bindings where the cell value maps directly to the hwirq number.
 */
int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
                             const u32 *intspec, unsigned int intsize,
                             unsigned long *out_hwirq, unsigned int *out_type)
{
        if (WARN_ON(intsize < 1))
                return -EINVAL;
        *out_hwirq = intspec[0];
        *out_type = IRQ_TYPE_NONE;
        return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_onecell);

/**
 * irq_domain_xlate_twocell() - Generic xlate for direct two cell bindings
 *
 * Device Tree IRQ specifier translation function which works with two cell
 * bindings where the cell values map directly to the hwirq number
 * and linux irq flags.
 */
int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
                        const u32 *intspec, unsigned int intsize,
                        irq_hw_number_t *out_hwirq, unsigned int *out_type)
{
        if (WARN_ON(intsize < 2))
                return -EINVAL;
        *out_hwirq = intspec[0];
        *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
        return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_twocell);

/**
 * irq_domain_xlate_onetwocell() - Generic xlate for one or two cell bindings
 *
 * Device Tree IRQ specifier translation function which works with either one
 * or two cell bindings where the cell values map directly to the hwirq number
 * and linux irq flags.
 *
 * Note: don't use this function unless your interrupt controller explicitly
 * supports both one and two cell bindings.  For the majority of controllers
 * the _onecell() or _twocell() variants above should be used.
 */
int irq_domain_xlate_onetwocell(struct irq_domain *d,
                                struct device_node *ctrlr,
                                const u32 *intspec, unsigned int intsize,
                                unsigned long *out_hwirq, unsigned int *out_type)
{
        if (WARN_ON(intsize < 1))
                return -EINVAL;
        *out_hwirq = intspec[0];
        *out_type = (intsize > 1) ? intspec[1] : IRQ_TYPE_NONE;
        return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell);

const struct irq_domain_ops irq_domain_simple_ops = {
        .xlate = irq_domain_xlate_onetwocell,
};
EXPORT_SYMBOL_GPL(irq_domain_simple_ops);

#ifdef CONFIG_OF_IRQ
void irq_domain_generate_simple(const struct of_device_id *match,
                                u64 phys_base, unsigned int irq_start)
{
        struct device_node *node;
        pr_debug("looking for phys_base=%llx, irq_start=%i\n",
                (unsigned long long) phys_base, (int) irq_start);
        node = of_find_matching_node_by_address(NULL, match, phys_base);
        if (node)
                irq_domain_add_legacy(node, 32, irq_start, 0,
                                      &irq_domain_simple_ops, NULL);
}
EXPORT_SYMBOL_GPL(irq_domain_generate_simple);
#endif