swsusp: do not use page flags
[deliverable/linux.git] / kernel / power / power.h
1 #include <linux/suspend.h>
2 #include <linux/utsname.h>
3
4 struct swsusp_info {
5 struct new_utsname uts;
6 u32 version_code;
7 unsigned long num_physpages;
8 int cpus;
9 unsigned long image_pages;
10 unsigned long pages;
11 unsigned long size;
12 } __attribute__((aligned(PAGE_SIZE)));
13
14
15
16 #ifdef CONFIG_SOFTWARE_SUSPEND
17 extern int pm_suspend_disk(void);
18
19 #else
20 static inline int pm_suspend_disk(void)
21 {
22 return -EPERM;
23 }
24 #endif
25
26 extern int pfn_is_nosave(unsigned long);
27
28 extern struct mutex pm_mutex;
29
30 #define power_attr(_name) \
31 static struct subsys_attribute _name##_attr = { \
32 .attr = { \
33 .name = __stringify(_name), \
34 .mode = 0644, \
35 }, \
36 .show = _name##_show, \
37 .store = _name##_store, \
38 }
39
40 extern struct kset power_subsys;
41
42 /* Preferred image size in bytes (default 500 MB) */
43 extern unsigned long image_size;
44 extern int in_suspend;
45 extern dev_t swsusp_resume_device;
46 extern sector_t swsusp_resume_block;
47
48 extern asmlinkage int swsusp_arch_suspend(void);
49 extern asmlinkage int swsusp_arch_resume(void);
50
51 extern int create_basic_memory_bitmaps(void);
52 extern void free_basic_memory_bitmaps(void);
53 extern unsigned int count_data_pages(void);
54
55 /**
56 * Auxiliary structure used for reading the snapshot image data and
57 * metadata from and writing them to the list of page backup entries
58 * (PBEs) which is the main data structure of swsusp.
59 *
60 * Using struct snapshot_handle we can transfer the image, including its
61 * metadata, as a continuous sequence of bytes with the help of
62 * snapshot_read_next() and snapshot_write_next().
63 *
64 * The code that writes the image to a storage or transfers it to
65 * the user land is required to use snapshot_read_next() for this
66 * purpose and it should not make any assumptions regarding the internal
67 * structure of the image. Similarly, the code that reads the image from
68 * a storage or transfers it from the user land is required to use
69 * snapshot_write_next().
70 *
71 * This may allow us to change the internal structure of the image
72 * in the future with considerably less effort.
73 */
74
75 struct snapshot_handle {
76 loff_t offset; /* number of the last byte ready for reading
77 * or writing in the sequence
78 */
79 unsigned int cur; /* number of the block of PAGE_SIZE bytes the
80 * next operation will refer to (ie. current)
81 */
82 unsigned int cur_offset; /* offset with respect to the current
83 * block (for the next operation)
84 */
85 unsigned int prev; /* number of the block of PAGE_SIZE bytes that
86 * was the current one previously
87 */
88 void *buffer; /* address of the block to read from
89 * or write to
90 */
91 unsigned int buf_offset; /* location to read from or write to,
92 * given as a displacement from 'buffer'
93 */
94 int sync_read; /* Set to one to notify the caller of
95 * snapshot_write_next() that it may
96 * need to call wait_on_bio_chain()
97 */
98 };
99
100 /* This macro returns the address from/to which the caller of
101 * snapshot_read_next()/snapshot_write_next() is allowed to
102 * read/write data after the function returns
103 */
104 #define data_of(handle) ((handle).buffer + (handle).buf_offset)
105
106 extern unsigned int snapshot_additional_pages(struct zone *zone);
107 extern int snapshot_read_next(struct snapshot_handle *handle, size_t count);
108 extern int snapshot_write_next(struct snapshot_handle *handle, size_t count);
109 extern void snapshot_write_finalize(struct snapshot_handle *handle);
110 extern int snapshot_image_loaded(struct snapshot_handle *handle);
111
112 /*
113 * This structure is used to pass the values needed for the identification
114 * of the resume swap area from a user space to the kernel via the
115 * SNAPSHOT_SET_SWAP_AREA ioctl
116 */
117 struct resume_swap_area {
118 loff_t offset;
119 u_int32_t dev;
120 } __attribute__((packed));
121
122 #define SNAPSHOT_IOC_MAGIC '3'
123 #define SNAPSHOT_FREEZE _IO(SNAPSHOT_IOC_MAGIC, 1)
124 #define SNAPSHOT_UNFREEZE _IO(SNAPSHOT_IOC_MAGIC, 2)
125 #define SNAPSHOT_ATOMIC_SNAPSHOT _IOW(SNAPSHOT_IOC_MAGIC, 3, void *)
126 #define SNAPSHOT_ATOMIC_RESTORE _IO(SNAPSHOT_IOC_MAGIC, 4)
127 #define SNAPSHOT_FREE _IO(SNAPSHOT_IOC_MAGIC, 5)
128 #define SNAPSHOT_SET_IMAGE_SIZE _IOW(SNAPSHOT_IOC_MAGIC, 6, unsigned long)
129 #define SNAPSHOT_AVAIL_SWAP _IOR(SNAPSHOT_IOC_MAGIC, 7, void *)
130 #define SNAPSHOT_GET_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 8, void *)
131 #define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9)
132 #define SNAPSHOT_SET_SWAP_FILE _IOW(SNAPSHOT_IOC_MAGIC, 10, unsigned int)
133 #define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11)
134 #define SNAPSHOT_PMOPS _IOW(SNAPSHOT_IOC_MAGIC, 12, unsigned int)
135 #define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
136 struct resume_swap_area)
137 #define SNAPSHOT_IOC_MAXNR 13
138
139 #define PMOPS_PREPARE 1
140 #define PMOPS_ENTER 2
141 #define PMOPS_FINISH 3
142
143 /**
144 * The bitmap is used for tracing allocated swap pages
145 *
146 * The entire bitmap consists of a number of bitmap_page
147 * structures linked with the help of the .next member.
148 * Thus each page can be allocated individually, so we only
149 * need to make 0-order memory allocations to create
150 * the bitmap.
151 */
152
153 #define BITMAP_PAGE_SIZE (PAGE_SIZE - sizeof(void *))
154 #define BITMAP_PAGE_CHUNKS (BITMAP_PAGE_SIZE / sizeof(long))
155 #define BITS_PER_CHUNK (sizeof(long) * 8)
156 #define BITMAP_PAGE_BITS (BITMAP_PAGE_CHUNKS * BITS_PER_CHUNK)
157
158 struct bitmap_page {
159 unsigned long chunks[BITMAP_PAGE_CHUNKS];
160 struct bitmap_page *next;
161 };
162
163 extern void free_bitmap(struct bitmap_page *bitmap);
164 extern struct bitmap_page *alloc_bitmap(unsigned int nr_bits);
165 extern sector_t alloc_swapdev_block(int swap, struct bitmap_page *bitmap);
166 extern void free_all_swap_pages(int swap, struct bitmap_page *bitmap);
167
168 extern int swsusp_check(void);
169 extern int swsusp_shrink_memory(void);
170 extern void swsusp_free(void);
171 extern int swsusp_suspend(void);
172 extern int swsusp_resume(void);
173 extern int swsusp_read(void);
174 extern int swsusp_write(void);
175 extern void swsusp_close(void);
176 extern int suspend_enter(suspend_state_t state);
177
178 struct timeval;
179 extern void swsusp_show_speed(struct timeval *, struct timeval *,
180 unsigned int, char *);
This page took 0.041429 seconds and 6 git commands to generate.