kernel/trace/Kconfig

   1 #
   2 # Architectures that offer an FUNCTION_TRACER implementation should
   3 #  select HAVE_FUNCTION_TRACER:
   4 #
   5
   6 config USER_STACKTRACE_SUPPORT
   7         bool
   8
   9 config NOP_TRACER
  10         bool
  11
  12 config HAVE_FTRACE_NMI_ENTER
  13         bool
  14         help
  15           See Documentation/trace/ftrace-implementation.txt
  16
  17 config HAVE_FUNCTION_TRACER
  18         bool
  19         help
  20           See Documentation/trace/ftrace-implementation.txt
  21
  22 config HAVE_FUNCTION_GRAPH_TRACER
  23         bool
  24         help
  25           See Documentation/trace/ftrace-implementation.txt
  26
  27 config HAVE_FUNCTION_GRAPH_FP_TEST
  28         bool
  29         help
  30          An arch may pass in a unique value (frame pointer) to both the
  31          entering and exiting of a function. On exit, the value is compared
  32          and if it does not match, then it will panic the kernel.
  33
  34 config HAVE_FUNCTION_TRACE_MCOUNT_TEST
  35         bool
  36         help
  37           See Documentation/trace/ftrace-implementation.txt
  38
  39 config HAVE_DYNAMIC_FTRACE
  40         bool
  41         help
  42           See Documentation/trace/ftrace-implementation.txt
  43
  44 config HAVE_FTRACE_MCOUNT_RECORD
  45         bool
  46         help
  47           See Documentation/trace/ftrace-implementation.txt
  48
  49 config HAVE_HW_BRANCH_TRACER
  50         bool
  51
  52 config HAVE_SYSCALL_TRACEPOINTS
  53         bool
  54         help
  55           See Documentation/trace/ftrace-implementation.txt
  56
  57 config TRACER_MAX_TRACE
  58         bool
  59
  60 config RING_BUFFER
  61         bool
  62
  63 config FTRACE_NMI_ENTER
  64        bool
  65        depends on HAVE_FTRACE_NMI_ENTER
  66        default y
  67
  68 config EVENT_TRACING
  69         select CONTEXT_SWITCH_TRACER
  70         bool
  71
  72 config CONTEXT_SWITCH_TRACER
  73         bool
  74
  75 config RING_BUFFER_ALLOW_SWAP
  76         bool
  77         help
  78          Allow the use of ring_buffer_swap_cpu.
  79          Adds a very slight overhead to tracing when enabled.
  80
  81 # All tracer options should select GENERIC_TRACER. For those options that are
  82 # enabled by all tracers (context switch and event tracer) they select TRACING.
  83 # This allows those options to appear when no other tracer is selected. But the
  84 # options do not appear when something else selects it. We need the two options
  85 # GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
  86 # hidding of the automatic options.
  87
  88 config TRACING
  89         bool
  90         select DEBUG_FS
  91         select RING_BUFFER
  92         select STACKTRACE if STACKTRACE_SUPPORT
  93         select TRACEPOINTS
  94         select NOP_TRACER
  95         select BINARY_PRINTF
  96         select EVENT_TRACING
  97
  98 config GENERIC_TRACER
  99         bool
 100         select TRACING
 101
 102 #
 103 # Minimum requirements an architecture has to meet for us to
 104 # be able to offer generic tracing facilities:
 105 #
 106 config TRACING_SUPPORT
 107         bool
 108         # PPC32 has no irqflags tracing support, but it can use most of the
 109         # tracers anyway, they were tested to build and work. Note that new
 110         # exceptions to this list aren't welcomed, better implement the
 111         # irqflags tracing for your architecture.
 112         depends on TRACE_IRQFLAGS_SUPPORT || PPC32
 113         depends on STACKTRACE_SUPPORT
 114         default y
 115
 116 if TRACING_SUPPORT
 117
 118 menuconfig FTRACE
 119         bool "Tracers"
 120         default y if DEBUG_KERNEL
 121         help
 122          Enable the kernel tracing infrastructure.
 123
 124 if FTRACE
 125
 126 config FUNCTION_TRACER
 127         bool "Kernel Function Tracer"
 128         depends on HAVE_FUNCTION_TRACER
 129         select FRAME_POINTER
 130         select KALLSYMS
 131         select GENERIC_TRACER
 132         select CONTEXT_SWITCH_TRACER
 133         help
 134           Enable the kernel to trace every kernel function. This is done
 135           by using a compiler feature to insert a small, 5-byte No-Operation
 136           instruction to the beginning of every kernel function, which NOP
 137           sequence is then dynamically patched into a tracer call when
 138           tracing is enabled by the administrator. If it's runtime disabled
 139           (the bootup default), then the overhead of the instructions is very
 140           small and not measurable even in micro-benchmarks.
 141
 142 config FUNCTION_GRAPH_TRACER
 143         bool "Kernel Function Graph Tracer"
 144         depends on HAVE_FUNCTION_GRAPH_TRACER
 145         depends on FUNCTION_TRACER
 146         depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE
 147         default y
 148         help
 149           Enable the kernel to trace a function at both its return
 150           and its entry.
 151           Its first purpose is to trace the duration of functions and
 152           draw a call graph for each thread with some information like
 153           the return value. This is done by setting the current return
 154           address on the current task structure into a stack of calls.
 155
 156
 157 config IRQSOFF_TRACER
 158         bool "Interrupts-off Latency Tracer"
 159         default n
 160         depends on TRACE_IRQFLAGS_SUPPORT
 161         depends on GENERIC_TIME
 162         select TRACE_IRQFLAGS
 163         select GENERIC_TRACER
 164         select TRACER_MAX_TRACE
 165         select RING_BUFFER_ALLOW_SWAP
 166         help
 167           This option measures the time spent in irqs-off critical
 168           sections, with microsecond accuracy.
 169
 170           The default measurement method is a maximum search, which is
 171           disabled by default and can be runtime (re-)started
 172           via:
 173
 174               echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
 175
 176           (Note that kernel size and overhead increases with this option
 177           enabled. This option and the preempt-off timing option can be
 178           used together or separately.)
 179
 180 config PREEMPT_TRACER
 181         bool "Preemption-off Latency Tracer"
 182         default n
 183         depends on GENERIC_TIME
 184         depends on PREEMPT
 185         select GENERIC_TRACER
 186         select TRACER_MAX_TRACE
 187         select RING_BUFFER_ALLOW_SWAP
 188         help
 189           This option measures the time spent in preemption off critical
 190           sections, with microsecond accuracy.
 191
 192           The default measurement method is a maximum search, which is
 193           disabled by default and can be runtime (re-)started
 194           via:
 195
 196               echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
 197
 198           (Note that kernel size and overhead increases with this option
 199           enabled. This option and the irqs-off timing option can be
 200           used together or separately.)
 201
 202 config SYSPROF_TRACER
 203         bool "Sysprof Tracer"
 204         depends on X86
 205         select GENERIC_TRACER
 206         select CONTEXT_SWITCH_TRACER
 207         help
 208           This tracer provides the trace needed by the 'Sysprof' userspace
 209           tool.
 210
 211 config SCHED_TRACER
 212         bool "Scheduling Latency Tracer"
 213         select GENERIC_TRACER
 214         select CONTEXT_SWITCH_TRACER
 215         select TRACER_MAX_TRACE
 216         help
 217           This tracer tracks the latency of the highest priority task
 218           to be scheduled in, starting from the point it has woken up.
 219
 220 config ENABLE_DEFAULT_TRACERS
 221         bool "Trace process context switches and events"
 222         depends on !GENERIC_TRACER
 223         select TRACING
 224         help
 225           This tracer hooks to various trace points in the kernel
 226           allowing the user to pick and choose which trace point they
 227           want to trace. It also includes the sched_switch tracer plugin.
 228
 229 config FTRACE_SYSCALLS
 230         bool "Trace syscalls"
 231         depends on HAVE_SYSCALL_TRACEPOINTS
 232         select GENERIC_TRACER
 233         select KALLSYMS
 234         help
 235           Basic tracer to catch the syscall entry and exit events.
 236
 237 config BOOT_TRACER
 238         bool "Trace boot initcalls"
 239         select GENERIC_TRACER
 240         select CONTEXT_SWITCH_TRACER
 241         help
 242           This tracer helps developers to optimize boot times: it records
 243           the timings of the initcalls and traces key events and the identity
 244           of tasks that can cause boot delays, such as context-switches.
 245
 246           Its aim is to be parsed by the scripts/bootgraph.pl tool to
 247           produce pretty graphics about boot inefficiencies, giving a visual
 248           representation of the delays during initcalls - but the raw
 249           /debug/tracing/trace text output is readable too.
 250
 251           You must pass in initcall_debug and ftrace=initcall to the kernel
 252           command line to enable this on bootup.
 253
 254 config TRACE_BRANCH_PROFILING
 255         bool
 256         select GENERIC_TRACER
 257
 258 choice
 259         prompt "Branch Profiling"
 260         default BRANCH_PROFILE_NONE
 261         help
 262          The branch profiling is a software profiler. It will add hooks
 263          into the C conditionals to test which path a branch takes.
 264
 265          The likely/unlikely profiler only looks at the conditions that
 266          are annotated with a likely or unlikely macro.
 267
 268          The "all branch" profiler will profile every if statement in the
 269          kernel. This profiler will also enable the likely/unlikely
 270          profiler as well.
 271
 272          Either of the above profilers add a bit of overhead to the system.
 273          If unsure choose "No branch profiling".
 274
 275 config BRANCH_PROFILE_NONE
 276         bool "No branch profiling"
 277         help
 278          No branch profiling. Branch profiling adds a bit of overhead.
 279          Only enable it if you want to analyse the branching behavior.
 280          Otherwise keep it disabled.
 281
 282 config PROFILE_ANNOTATED_BRANCHES
 283         bool "Trace likely/unlikely profiler"
 284         select TRACE_BRANCH_PROFILING
 285         help
 286           This tracer profiles all the the likely and unlikely macros
 287           in the kernel. It will display the results in:
 288
 289           /sys/kernel/debug/tracing/profile_annotated_branch
 290
 291           Note: this will add a significant overhead, only turn this
 292           on if you need to profile the system's use of these macros.
 293
 294 config PROFILE_ALL_BRANCHES
 295         bool "Profile all if conditionals"
 296         select TRACE_BRANCH_PROFILING
 297         help
 298           This tracer profiles all branch conditions. Every if ()
 299           taken in the kernel is recorded whether it hit or miss.
 300           The results will be displayed in:
 301
 302           /sys/kernel/debug/tracing/profile_branch
 303
 304           This option also enables the likely/unlikely profiler.
 305
 306           This configuration, when enabled, will impose a great overhead
 307           on the system. This should only be enabled when the system
 308           is to be analyzed
 309 endchoice
 310
 311 config TRACING_BRANCHES
 312         bool
 313         help
 314           Selected by tracers that will trace the likely and unlikely
 315           conditions. This prevents the tracers themselves from being
 316           profiled. Profiling the tracing infrastructure can only happen
 317           when the likelys and unlikelys are not being traced.
 318
 319 config BRANCH_TRACER
 320         bool "Trace likely/unlikely instances"
 321         depends on TRACE_BRANCH_PROFILING
 322         select TRACING_BRANCHES
 323         help
 324           This traces the events of likely and unlikely condition
 325           calls in the kernel.  The difference between this and the
 326           "Trace likely/unlikely profiler" is that this is not a
 327           histogram of the callers, but actually places the calling
 328           events into a running trace buffer to see when and where the
 329           events happened, as well as their results.
 330
 331           Say N if unsure.
 332
 333 config POWER_TRACER
 334         bool "Trace power consumption behavior"
 335         depends on X86
 336         select GENERIC_TRACER
 337         help
 338           This tracer helps developers to analyze and optimize the kernels
 339           power management decisions, specifically the C-state and P-state
 340           behavior.
 341
 342
 343 config STACK_TRACER
 344         bool "Trace max stack"
 345         depends on HAVE_FUNCTION_TRACER
 346         select FUNCTION_TRACER
 347         select STACKTRACE
 348         select KALLSYMS
 349         help
 350           This special tracer records the maximum stack footprint of the
 351           kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
 352
 353           This tracer works by hooking into every function call that the
 354           kernel executes, and keeping a maximum stack depth value and
 355           stack-trace saved.  If this is configured with DYNAMIC_FTRACE
 356           then it will not have any overhead while the stack tracer
 357           is disabled.
 358
 359           To enable the stack tracer on bootup, pass in 'stacktrace'
 360           on the kernel command line.
 361
 362           The stack tracer can also be enabled or disabled via the
 363           sysctl kernel.stack_tracer_enabled
 364
 365           Say N if unsure.
 366
 367 config HW_BRANCH_TRACER
 368         depends on HAVE_HW_BRANCH_TRACER
 369         bool "Trace hw branches"
 370         select GENERIC_TRACER
 371         help
 372           This tracer records all branches on the system in a circular
 373           buffer giving access to the last N branches for each cpu.
 374
 375 config KMEMTRACE
 376         bool "Trace SLAB allocations"
 377         select GENERIC_TRACER
 378         help
 379           kmemtrace provides tracing for slab allocator functions, such as
 380           kmalloc, kfree, kmem_cache_alloc, kmem_cache_free etc.. Collected
 381           data is then fed to the userspace application in order to analyse
 382           allocation hotspots, internal fragmentation and so on, making it
 383           possible to see how well an allocator performs, as well as debug
 384           and profile kernel code.
 385
 386           This requires an userspace application to use. See
 387           Documentation/trace/kmemtrace.txt for more information.
 388
 389           Saying Y will make the kernel somewhat larger and slower. However,
 390           if you disable kmemtrace at run-time or boot-time, the performance
 391           impact is minimal (depending on the arch the kernel is built for).
 392
 393           If unsure, say N.
 394
 395 config WORKQUEUE_TRACER
 396         bool "Trace workqueues"
 397         select GENERIC_TRACER
 398         help
 399           The workqueue tracer provides some statistical informations
 400           about each cpu workqueue thread such as the number of the
 401           works inserted and executed since their creation. It can help
 402           to evaluate the amount of work each of them have to perform.
 403           For example it can help a developer to decide whether he should
 404           choose a per cpu workqueue instead of a singlethreaded one.
 405
 406 config BLK_DEV_IO_TRACE
 407         bool "Support for tracing block io actions"
 408         depends on SYSFS
 409         depends on BLOCK
 410         select RELAY
 411         select DEBUG_FS
 412         select TRACEPOINTS
 413         select GENERIC_TRACER
 414         select STACKTRACE
 415         help
 416           Say Y here if you want to be able to trace the block layer actions
 417           on a given queue. Tracing allows you to see any traffic happening
 418           on a block device queue. For more information (and the userspace
 419           support tools needed), fetch the blktrace tools from:
 420
 421           git://git.kernel.dk/blktrace.git
 422
 423           Tracing also is possible using the ftrace interface, e.g.:
 424
 425             echo 1 > /sys/block/sda/sda1/trace/enable
 426             echo blk > /sys/kernel/debug/tracing/current_tracer
 427             cat /sys/kernel/debug/tracing/trace_pipe
 428
 429           If unsure, say N.
 430
 431 config DYNAMIC_FTRACE
 432         bool "enable/disable ftrace tracepoints dynamically"
 433         depends on FUNCTION_TRACER
 434         depends on HAVE_DYNAMIC_FTRACE
 435         default y
 436         help
 437          This option will modify all the calls to ftrace dynamically
 438          (will patch them out of the binary image and replaces them
 439          with a No-Op instruction) as they are called. A table is
 440          created to dynamically enable them again.
 441
 442          This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but otherwise
 443          has native performance as long as no tracing is active.
 444
 445          The changes to the code are done by a kernel thread that
 446          wakes up once a second and checks to see if any ftrace calls
 447          were made. If so, it runs stop_machine (stops all CPUS)
 448          and modifies the code to jump over the call to ftrace.
 449
 450 config FUNCTION_PROFILER
 451         bool "Kernel function profiler"
 452         depends on FUNCTION_TRACER
 453         default n
 454         help
 455          This option enables the kernel function profiler. A file is created
 456          in debugfs called function_profile_enabled which defaults to zero.
 457          When a 1 is echoed into this file profiling begins, and when a
 458          zero is entered, profiling stops. A file in the trace_stats
 459          directory called functions, that show the list of functions that
 460          have been hit and their counters.
 461
 462          If in doubt, say N
 463
 464 config FTRACE_MCOUNT_RECORD
 465         def_bool y
 466         depends on DYNAMIC_FTRACE
 467         depends on HAVE_FTRACE_MCOUNT_RECORD
 468
 469 config FTRACE_SELFTEST
 470         bool
 471
 472 config FTRACE_STARTUP_TEST
 473         bool "Perform a startup test on ftrace"
 474         depends on GENERIC_TRACER
 475         select FTRACE_SELFTEST
 476         help
 477           This option performs a series of startup tests on ftrace. On bootup
 478           a series of tests are made to verify that the tracer is
 479           functioning properly. It will do tests on all the configured
 480           tracers of ftrace.
 481
 482 config EVENT_TRACE_TEST_SYSCALLS
 483         bool "Run selftest on syscall events"
 484         depends on FTRACE_STARTUP_TEST
 485         help
 486          This option will also enable testing every syscall event.
 487          It only enables the event and disables it and runs various loads
 488          with the event enabled. This adds a bit more time for kernel boot
 489          up since it runs this on every system call defined.
 490
 491          TBD - enable a way to actually call the syscalls as we test their
 492                events
 493
 494 config MMIOTRACE
 495         bool "Memory mapped IO tracing"
 496         depends on HAVE_MMIOTRACE_SUPPORT && PCI
 497         select GENERIC_TRACER
 498         help
 499           Mmiotrace traces Memory Mapped I/O access and is meant for
 500           debugging and reverse engineering. It is called from the ioremap
 501           implementation and works via page faults. Tracing is disabled by
 502           default and can be enabled at run-time.
 503
 504           See Documentation/trace/mmiotrace.txt.
 505           If you are not helping to develop drivers, say N.
 506
 507 config MMIOTRACE_TEST
 508         tristate "Test module for mmiotrace"
 509         depends on MMIOTRACE && m
 510         help
 511           This is a dumb module for testing mmiotrace. It is very dangerous
 512           as it will write garbage to IO memory starting at a given address.
 513           However, it should be safe to use on e.g. unused portion of VRAM.
 514
 515           Say N, unless you absolutely know what you are doing.
 516
 517 config RING_BUFFER_BENCHMARK
 518         tristate "Ring buffer benchmark stress tester"
 519         depends on RING_BUFFER
 520         help
 521           This option creates a test to stress the ring buffer and bench mark it.
 522           It creates its own ring buffer such that it will not interfer with
 523           any other users of the ring buffer (such as ftrace). It then creates
 524           a producer and consumer that will run for 10 seconds and sleep for
 525           10 seconds. Each interval it will print out the number of events
 526           it recorded and give a rough estimate of how long each iteration took.
 527
 528           It does not disable interrupts or raise its priority, so it may be
 529           affected by processes that are running.
 530
 531           If unsure, say N
 532
 533 endif # FTRACE
 534
 535 endif # TRACING_SUPPORT
 536