5 * Add -z separate-code to generate separate code PT_LOAD segment.
7 * Add "-z undefs" command line option as the inverse of the "-z defs" option.
9 * Add -z globalaudit command line option to force audit libraries to be run
10 for every dynamic object loaded by an executable - provided that the loader
11 supports this functionality.
13 * Tighten linker script grammar around file name specifiers to prevent the use
14 of SORT_BY_ALIGNMENT and SORT_BY_INIT_PRIORITY on filenames. These would
15 previously be accepted but had no effect.
17 * The EXCLUDE_FILE directive can now be placed within any SORT_* directive
18 within input section lists.
22 * Support for -z shstk in the x86 ELF linker to generate
23 GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program properties.
25 * Add support for GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program
26 properties in the x86 ELF linker.
28 * Add support for GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
29 properties in the x86 ELF linker.
31 * Support for -z ibtplt in the x86 ELF linker to generate IBT-enabled
34 * Support for -z ibt in the x86 ELF linker to generate IBT-enabled
35 PLT as well as GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
38 * Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
40 * Add support for ELF GNU program properties.
42 * Add support for the Texas Instruments PRU processor.
44 * When configuring for arc*-*-linux* targets the default linker emulation will
45 change if --with-cpu=nps400 is used at configure time.
47 * Improve assignment of LMAs to orphan sections in some edge cases where a
48 mixture of both AT>LMA_REGION and AT(LMA) are used.
50 * Orphan sections placed after an empty section that has an AT(LMA) will now
51 take an load memory address starting from LMA.
53 * Section groups can now be resolved (the group deleted and the group members
54 placed like normal sections) at partial link time either using the new linker
55 option --force-group-allocation or by placing FORCE_GROUP_ALLOCATION into the
60 * The EXCLUDE_FILE linker script construct can now be applied outside of the
61 section list in order for the exclusions to apply over all input sections in
64 * Add support for the RISC-V architecture.
66 * The command line option --no-eh-frame-hdr can now be used in ELF based
67 linkers to disable the automatic generation of .eh_frame_hdr sections.
69 * Add --in-implib=<infile> to the ARM linker to enable specifying a set of
70 Secure Gateway veneers that must exist in the output import library specified
71 by --out-implib=<outfile> and the address they must have. As such,
72 --in-implib is only supported in combination with --cmse-implib.
74 * Extended the --out-implib=<file> option, previously restricted to x86 PE
75 targets, to any ELF based target. This allows the generation of an import
76 library for an ELF executable, which can then be used by another application
77 to link against the executable.
81 * Add a configure option --enable-relro to decide whether -z relro should
82 be enabled in ELF linker by default. Default to yes for all Linux
83 targets except FRV, HPPA, IA64 and MIPS. Note that -z relro can increase
86 * Support for -z noreloc-overflow in the x86-64 ELF linker to disable
87 relocation overflow check.
89 * Add -z common/-z nocommon options for ELF targets to control whether to
90 convert common symbols to the STT_COMMON type during a relocatable link.
92 * Support for -z nodynamic-undefined-weak in the x86 ELF linker, which
93 avoids dynamic relocations against undefined weak symbols in executable.
95 * The NOCROSSREFSTO command was added to the linker script language.
97 * Add --no-apply-dynamic-relocs to the AArch64 linker to do not apply link-time
98 values for dynamic relocations.
102 * Add --fix-stm32l4xx-629360 to the ARM linker to enable a link-time
103 workaround for a bug in the bus matrix / memory controller for some of
104 the STM32 Cortex-M4 based products (STM32L4xx)
106 * Add a configure option --enable-compressed-debug-sections={all,ld} to
107 decide whether DWARF debug sections should be compressed by default.
109 * Add support for the ARC EM/HS, and ARC600/700 architectures.
111 * Experimental support for linker garbage collection (--gc-sections)
112 has been enabled for COFF and PE based targets.
114 * New command line option for ELF targets to compress DWARF debug
115 sections, --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
117 * New command line option, --orphan-handling=[place|warn|error|discard], to
118 adjust how orphan sections are handled. The default is 'place' which gives
119 the current behaviour, 'warn' and 'error' issue a warning or error
120 respectively when orphan sections are found, and 'discard' will discard all
123 * Add support for LLVM plugin.
125 * Add --print-memory-usage option to report memory blocks usage.
127 * Add --require-defined option, it's like --undefined except the new symbol
128 must be defined by the end of the link.
132 * PE binaries now once again contain real timestamps by default. To disable
133 the inclusion of a timestamp in a PE binary, use the --no-insert-timestamp
136 * Replace support for openrisc and or32 with support for or1k.
138 * Add support for the --build-id command line option to COFF based targets.
140 * x86/x86_64 pe-coff now supports the --build-id option.
142 * Add support for the Andes NDS32.
146 * Add LOG2CEIL() builtin function to the linker script language
148 * Add support for the Texas Instruments MSP430X processor.
150 * Add support for Altera Nios II.
152 * Add support for the V850E3V5 architecture.
154 * Add support for the Imagination Technologies Meta processor.
156 * --enable-new-dtags no longer generates old dtags in addition to new dtags.
158 * Remove linker support for MIPS ECOFF targets.
160 * Add ALIGN_WITH_INPUT to the linker script language to force the alignment of
161 an output section to use the maximum alignment of all its input sections.
165 * Enable compressed debug section feature for x86/x86_64 pe-coff.
167 * Add support for the 64-bit ARM architecture: AArch64.
169 * Added SORT_NONE to the linker script language to disable section sorting.
171 * Add a linker-provided symbol when producing ELF output, '__ehdr_start'
172 to point to the ELF file header (and nearby program headers) in the
173 program's memory image.
175 * Add support for S12X processor.
177 * Add support for the VLE extension to the PowerPC architecture.
179 * Add support for the Freescale XGATE architecture.
181 * Add option -f FILE on AIX (for response file).
183 * Add support for the Renesas RL78 architecture.
185 * Add support for the Adapteva EPIPHANY architecture.
189 * --copy-dt-needed-entries is no longer enabled by default. Instead
190 --no-copy-dt-needed-entries is the default.
192 * INPUT_SECTION_FLAGS has been added to the linker script language
193 to allow selection of input sections by section header section flags.
195 * Add support for the Tilera TILEPro and TILE-Gx architectures.
197 * Added SORT_BY_INIT_PRIORITY to the linker script language to permit
198 sorting sections by numerical value of the GCC init_priority attribute
199 encoded in the section name.
203 * Linker script expression evaluation is somewhat more sane. This may
204 break scripts that depend on quirks of the old expression evaluation.
206 * Turn off underscoring for x86_64 PE+-COFF targets. For old behavior the
207 option --enable-leading-mingw64-underscores can be used on configure of
210 * Add support for the TMS320C6000 (TI C6X) processor family.
212 * --add-needed renamed to --copy-dt-needed-entries in order to avoid confusion
213 with --as-needed option.
215 * Extend .def file syntax by '== <ID>' for imports and exports. This allows
216 to alias the import/export table name written in PE image.
218 * Add --exclude-all-symbols option to PE based linkers. This prevents all
219 symbols from automatically being exported.
221 * Add support for the Renesas RX processor.
223 * Add support for alpha-vms target.
227 * GNU/Linux targets now support the STB_GNU_UNIQUE symbol binding. This is a
228 GNU extension to the standard set of ELF symbol bindings. The binding will
229 be passed on to the dynamic linker which will make sure that in the entire
230 process there is just one symbol with the given name and type in use.
232 * PE targets now support a GNU extension to allow the alignment of common
233 common symbols to be specified. This support uses custom options in
234 the .drectve section, which will be disregarded by the native tools.
236 * PE targets now add primitive support for ELF version scripts; symbols
237 are not versioned, but the local and global symbol visibility directives
238 are respected when filtering symbols in auto-export mode.
240 * New option --no-export-dynamic to undo the effect of the -E and
241 --export-dynamic options.
243 * ELF: --warn-alternate-em option to warn if an object has alternate
246 * New script function REGION_ALIAS to add alias names to memory regions.
248 * PE targets no longer make use of the long section names PE extension to
249 the COFF format when generating executable images, by default. The old
250 (slightly non-conformant) behaviour can still be invoked by using the
251 new '--enable-long-section-names' command-line option. It is also enabled
252 automatically in the presence of un-stripped debug information, as GDB
253 needs to be able to find the debug info sections by their full names.
255 * For GNU/Linux systems the linker will now avoid processing any relocations
256 made against symbols of the STT_GNU_IFUNC type and instead emit them into
257 the resulting binary for processing by the loader.
259 * --as-needed now links in a dynamic library if it satisfies undefined
260 symbols in regular objects, or in other dynamic libraries. In the
261 latter case the library is not linked if it is found in a DT_NEEDED
262 entry of one of the libraries already linked.
264 * Add a new command line option, -Ttext-segment ADDR, for ELF targets
265 to set the address of the first byte of the text segment.
267 * Add support for Sunplus score architecture.
269 * Add new option --use-nul-prefixed-import-tables to ld for PE targets to
270 allow fallback to old import table generation with null element prefix.
272 * Windows PE systems now support a new --exclude-modules-for-implib option,
273 allowing users to partition object files and archive members between a DLL
274 and its associated import library as they are generated during linking.
276 * Add support for Lattice Mico32 (lm32) architecture.
278 * Add CR16 ELF --embedded-relocs (used to embedded relocations into binaries
279 for Embedded-PIC code) option.
281 * Add to the PE/PE+ targets the support of two different kinds of
282 pseudo-relocations. They can be selected by the switches
283 --enable-runtime-pseudo-reloc-v1 and --enable-runtime-pseudo-reloc-v2.
284 For the switch --enable-runtime-pseudo-reloc it uses for 32-bit
285 runtime pseudo relocation version one, for 64-bit the version two.
289 * Linker scripts support a new INSERT command that makes it easier to
290 augment the default script.
292 * Linker script input section filespecs may now specify a file within an
293 archive by writing "archive:file".
295 * The --sort-common switch now has an optional argument which specifies the
296 direction of sorting.
298 * The M68K linker now supports multiple GOT generation schemes controlled via
299 the --got=<type> command line option.
301 * The ARM EABI linker will now generate stubs for function calls to symbols
302 that are too far away. The placement of the stubs is controlled by a new
303 linker command line option: --stub-group-size=N.
307 * Linker sources now released under version 3 of the GNU General Public
310 * ELF: New --build-id option to generate a unique per-binary identifier
311 embedded in a note section.
313 * Added support for National Semicondutor CompactRISC (ie CR16) target.
315 * -l:foo now searches the library path for a filename called foo,
316 without converting it to libfoo.a or libfoo.so.
318 * Add a new command line option '--default-script=FILE' or '-dT FILE'
319 which specifies a replacement for the built in, default linker
322 * ELF: Add -Bsymbolic-functions, --dynamic-list-cpp-new, which puts C++
323 operator new and delete on the dynamic list, and --dynamic-list-data,
324 builtin list for --dynamic-list, which puts global data symbols on the
327 * Add support for x86_64 PE+ target.
329 * Add support for Score target.
331 * ELF: Add --dynamic-list option to specify a list of global symbols
332 whose references shouldn't be bound to the definition within the
333 shared library, or a list of symbols which should be added to the
334 symbol table in the executable.
336 * The default output section LMA has changed for allocatable sections from
337 being equal to VMA, to keeping the difference between LMA and VMA the same as
338 the previous output section in the same region. This is a more useful
339 default when using overlays and other cases where you specify an LMA
340 differing from the VMA for some sections.
342 * New switch: --print-gc-sections to list any sections removed by garabge
345 * ARM: Added --vfp11-denorm-fix option to work around an erratum in current
350 * Support for the Infineon XC16X has been added by KPIT Cummins Infosystems.
352 * Modify the Linux linker search order to better match ld.so search order.
353 Look for DT_NEEDED libraries in paths specified by ld.so.conf before
354 searching the default directories, rather than vice versa.
355 Use $prefix/etc/ld.so.conf if it exists, otherwise /etc/ld.so.conf.
357 * PE-COFF: Forward exports from DLL's can now be specified in .def files
358 passed directly to ld.
360 * Support for the Z80 processor family has been added.
362 * Add support for the "@<file>" syntax to the command line, so that extra
363 switches can be read from <file>.
367 * Support for the R_ARM_V4BX relocation as defined in the ARM AAELF
368 specification has been added via the --fix-v4bx command-line option.
370 * New linker script construct AS_NEEDED(), which sets the --as-needed flag
371 for input files listed inside of it.
373 * A new command-line option, --sysroot, can be used to override the
374 default sysroot location. It only applies to toolchains that were
375 configured using --with-sysroot.
377 * New linker script functions: ORIGIN() and LENGTH() which return information
378 about a specified memory region.
380 * Port to MAXQ processor contributed by HCL Tech.
382 * Added SEGMENT_START to the linker script language to permit the user to
383 override the base address for a segment from the command-line.
385 * ELF: --warn-shared-textrel option to warn if adding a DT_TEXTREL to a shared
388 * Added SORT_BY_NAME and SORT_BY_ALIGNMENT to the linker script
389 language to permit sorting sections by section name or section
392 * Added a new linker command line switch, --sort-section name|alignment,
393 to sort sections by section name or maximum alignment.
395 * ELF: --add-needed/--no-add-needed options to control if a DT_NEEDED tag
396 should be added when a shared library comes from DT_NEEDED tags.
398 * Support for the crx-elf target added.
400 * Support for the sh-symbianelf target added.
402 * A new linker command line switch has been added which allows the hash table
403 size to be set to a suitable prime value near to its argument. This switch
404 is --hash-size=<NUMBER>. Also if the switch --reduce-memory-overheads is
405 used, and --hash-size has not been used, then the default value will be set
408 * Linker map files are now generated with an O(N) algorithm for finding symbols
409 that are defined in each section. This uses about 40% more memory for
410 symbols than the old O(N^2) algorithm. You can use the new
411 --reduce-memory-overheads option to select the old algorithm; this option
412 might also be used in the future to select similar tradeoffs.
416 * ELF: --as-needed/--no-as-needed options to control if a DT_NEEDED tag should
417 be added only when a shared library is referenced.
419 * PE: --large-address-aware option to indicate executables support virtual
420 addresses greater than 2 gigabytes.
422 * DWARF 2 support for i386pe added.
424 * The linker script operator DEFINED() will now yield 1 only for a symbol that
425 is defined before the statement where DEFINED is used.
427 * The MIPS --embedded-relocs (used to embed relocations into binaries for
428 Embedded-PIC code) is deprecated and will be removed in a future release.
430 * cr16c support added by NSC.
432 * m32r Linux (ELF) support added by Renesas.
434 * Improved linker's handling of unresolved symbols. The switch
435 --unresolved-symbols=<method> has been added to tell the linker when it
436 should report them and the switch --warn-unresolved-symbols has been added to
437 make reports be issued as warning messages rather than errors.
441 * Added support for Xtensa architecture.
443 * Added --with-sysroot configure switch to specify a target system root, for
444 linking against a target filesystem image.
446 * Added --accept-unknown-linker-format to restore old linker behaviour (pre
447 2.14) of silently accepting and linking in any files in an unknown binary
450 * Added --no-omagic to undo the effects of the -N option.
452 * Support for Texas Instruments TMS320C4x and TMS320C3x series of
453 DSP's contributed by Michael Hayes and Svein E. Seldal.
455 * Added --with-lib-path configure switch to specify default value for
458 * ARM port to QNX operating system added by Graeme Peterson.
460 * IP2K support added by Denis Chertykov.
464 * Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400
467 Changes in version 2.13:
469 * DEC VAX ELF support, by Matt Thomas.
471 Changes in version 2.12:
473 * Support for Don Knuth's MMIX, by Hans-Peter Nilsson.
475 * Support for the OpenRISC 32-bit embedded processor by OpenCores.
477 * Support for -z nocopyreloc in the x86 ELF linker, which disables
478 production of copy relocs. Warning: using this option may result in
479 non-sharable applications.
481 * Support for -z combreloc in the ELF linker, which puts dynamic
482 relocations against the same symbol together, so that dynamic linker
483 can use an one-entry symbol lookup cache.
485 * Support for ELF SHF_MERGE section merging, by Jakub Jelinek.
487 Changes in version 2.11:
489 * Support for AMD x86-64 architecture, by Jan Hubicka, SuSE Labs.
491 * Support added for eliminating duplicate DWARF2 debug information by
492 having the compiler generate the information in sections called
493 .gnu.linkonce.wi.XXXX where XXXX is a checksum for the contents. The
494 linker then merges these sections together into the normal .debug_info
497 * The native ELF linker now searches the directories in DT_RUNPATH or
498 DT_RPATH of a shared library for shared libraries needed by it.
500 * TI C54x support, by Timothy Wall.
502 * Added command line switch --section-start to set the start address of any
505 * Added ability to emit full relocation information in linked executables,
506 enabled by --emit-relocs. Some post-linkage optimization tools need
507 this information in order to be able to correctly identify and perform
508 symbol relative addressing in the event of changes in section contents
509 (instructions being added or deleted, extending data sections, etc.)
511 * Support for i860, by Jason Eckhardt (preliminary, alpha quality).
513 * Support for CRIS (Axis Communications ETRAX series).
515 * Support for PDP-11 and 2.11BSD a.out format, by Lars Brinkhoff.
517 Changes in version 2.10:
519 * Added AT> to the linker script language to allow load-time allocation of
520 sections into regions.
522 * Added garbage collection of unused sections, enabled by --gc-sections.
523 It does require a bit of backend support; currently implemented are
524 arm-elf, avr-elf, d10v-elf, fr30-elf, i386-elf, m32r-elf, m68k-elf,
525 mcore-elf, mips-elf, mn10300-elf, ppc-elf, sh-elf, sparc-elf, and v850-elf.
526 Others will ignore the option.
528 * Added SORT to the linker script language to permit sorting sections by file
529 name or section name.
531 * Added EXTERN to the linker script language as an equivalent to the -u
534 * Added ASSERT to the linker script language.
536 * Added EXCLUDE_FILE to the linker script language for further control over
539 * Added -O option to optimize linker output (as of this writing, this only
540 affects ELF shared library generation).
542 * The -e option now accepts a number as well as a symbol name.
544 * Added --no-undefined option to disallow undefined symbols when creating a
547 * The linker now issues a warning, not an error, for an undefined symbol when
548 using -Bsymbolic; use the new --no-undefined option to get the old
551 * Added --demangle and --no-demangle options.
553 Changes in version 2.9:
555 * Added SQUAD to the linker script language.
557 * New option --no-warn-mismatch.
559 * The MEMORY command now parses the attributes to determine where sections that
560 are not placed in a specific memory region are placed.
562 Changes in version 2.8:
564 * Linker scripts may now contain shell wildcard characters for file and section
567 * The linker now supports symbol versions in ELF.
569 * The NOCROSSREFS command was added to the linker script language.
571 * The LOADADDR expression was added to the linker script language.
573 * MAX and MIN functions were added to the linker script language.
575 * The OVERLAY construct was added to the linker script language.
577 * New option --warn-section-align to warn when the address of an output section
578 changes due to alignment of an input section.
580 * New options --filter/-F and --auxiliary/-f.
582 Changes in version 2.7:
584 * New option --cref to print out a cross reference table.
586 * New option --wrap SYMBOL.
588 * New option --no-whole-archive, to turn off the effect of --whole-archive.
590 * Input sections assigned to the output section /DISCARD/ in the linker script
591 are not included in the output file.
593 * The SunOS and ELF linkers now merge stabs debugging information which uses
594 the N_BINCL and N_EINCL stab types. This reduces the amount of debugging
595 information generated.
597 Changes in version 2.6:
599 * When an ELF section name is representable as a C identifier (this is not true
600 of most ELF section names), the linker will automatically define symbols
601 __start_SECNAME and __stop_SECNAME, where SECNAME is the section name, at the
602 beginning and the end of the section. This is used by glibc.
604 Addendum: Current versions of the linker (at least for version 2.18 onwards
605 and possibly much earlier as well) place two restrictions on this feature: The
606 symbols are only implemented for orphaned sections, not for explicitly placed
607 sections and they are PROVIDEd rather than being defined.
609 * When an ELF section named .gnu.warning is encountered in an input file, the
610 contents of the section are displayed as an error message, and the section is
611 not copied into the output file. This is used by glibc.
613 * When an ELF section named .gnu.warning.SYMBOL is encountered in an input
614 file, and the symbol SYMBOL is referenced by some object file, the contents of
615 the section are displayed as an error message. The section is not copied into
616 the output file, unless doing a relocatable or shared link. This is used by
619 * New options -split-by-reloc and -split-by-file.
621 * The linker now supports linking PIC compiled code on SPARC SunOS. It can
622 also create SPARC SunOS shared libraries, and, like the native SunOS linker,
623 will do so whenever there is an undefined symbol in the link and neither the -e
624 nor the -r option was used.
626 * The -rpath option may be used on SunOS to set the list of directories to be
627 searched at run time. This overrides the default of building the list from the
630 * The COFF linker now combines debugging information for structs, unions, and
631 enums, so that even if the same type is defined in multiple input files it will
632 only be defined once in the output file. The --traditional-format switch will
633 prevent this optimization.
635 Changes in version 2.5:
637 * The linker now supports linking against SunOS shared libraries. It still can
638 not link SunOS PIC (Position Independent Code) files, so it can not be used to
639 generate shared libraries.
641 * The linker now supports linking against ELF shared libraries for the i386
642 (UnixWare) and SPARC (Solaris). It can also link ELF PIC files, and can be
643 used to generate shared libraries. Shared library generation is not well
644 tested; please report any problems encountered. The linker is now enabled for
647 * Eric Youngdale has contributed Linux support code, including linking against
648 Linux a.out shared libraries. The linker produces Linux QMAGIC binaries.
650 * The ELF backend has been converted to the new linker code. To use the new
651 ELF linker, each particular target requires a relocation function. So far,
652 this function has been written for i386 (UnixWare), SPARC (Solaris) MIPS (Irix
653 5), and HPPA ELF targets.
655 * The -( (--start-group) and -) (--end-group) options have been added to
656 support searching a group of archives as though they were a single archive.
657 This can also be used in a linker script, as GROUP ( files ).
659 * When a file is named on the command line, and the linker does not recognize
660 it as an object file, the linker will now treat the file as a linker script
661 file. A linker script named in this way augments, but does not replace, the
662 default linker script.
664 * The -warn-once option was added. It causes the linker to only warn once per
665 undefined symbol, rather than once per reference.
667 * The COFF backend has been converted to the new linker code. As with ELF, to
668 use the new linker, each particular target requires a relocation function. So
669 far, this function has been written for the i386, m68k, a29k and SH targets.
671 * The -V flag was made a synonym for -v, for SVR4 compatibility. The old -V
672 behaviour is available via --verbose.
674 Changes in version 2.4:
676 * New linker code, by Steve Chamberlain and Ian Taylor. For a.out and ecoff
677 formats (so far), this should result in considerable savings in time
678 and memory used while linking; slightly poorer performance than
679 before for formats not converted yet.
681 * Command-line parsing is no longer done with flex. This means
682 oddball characters in filenames won't get treated as argument
685 * HP-PA ELF support, by Jeff Law. (No SOM support yet.)
687 * Mach i386 support, by David Mackenzie.
689 * Irix 4 shared libraries are now supported (Irix 5 uses ELF, and ELF shared
690 libraries are not yet supported).
692 * COFF shared libraries (as on SCO) should work as well.
694 * The linker is disabled for Solaris. (Actually, it was in 2.3 also, I just
695 forgot to note it.) Some of their C library routines don't work when
696 statically linked, and the GNU linker doesn't support dynamic linking yet.
698 Changes in version 2.3:
700 * Weak symbols are now supported.
702 * ELF support has been added. The linker has been bootstrapped on
703 UnixWare and Solaris.
705 * Alpha OSF/1 support has been added (non dynamic linking only).
707 Changes in version 2.2:
709 * The `bfd' library has been updated to reduce a.out-format string
710 table size. The effect of this is that files linked from many input
711 files with duplicate symbols (`-g' debugging records, or identical
712 static symbols) should be much smaller.
714 Changes in version 2.1:
716 * The ld -ySYMBOL flag (to trace references to SYMBOL) is now implemented.
718 * There is now support for writing ECOFF files, so ld and the
719 other utilities should work on Risc/Ultrix and Irix.
722 Copyright (C) 2012-2018 Free Software Foundation, Inc.
724 Copying and distribution of this file, with or without modification,
725 are permitted in any medium without royalty provided the copyright
726 notice and this notice are preserved.