ld/scripttempl/elf.sc

   1 #
   2 # Unusual variables checked by this code:
   3 #       NOP - four byte opcode for no-op (defaults to 0)
   4 #       NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
   5 #               empty.
   6 #       SMALL_DATA_CTOR - .ctors contains small data.
   7 #       SMALL_DATA_DTOR - .dtors contains small data.
   8 #       DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
   9 #       INITIAL_READONLY_SECTIONS - at start of text segment
  10 #       OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
  11 #               (e.g., .PARISC.milli)
  12 #       OTHER_TEXT_SECTIONS - these get put in .text when relocating
  13 #       OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
  14 #               (e.g., .PARISC.global)
  15 #       OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
  16 #               (e.g. PPC32 .fixup, .got[12])
  17 #       OTHER_BSS_SECTIONS - other than .bss .sbss ...
  18 #       ATTRS_SECTIONS - at the end
  19 #       OTHER_SECTIONS - at the end
  20 #       EXECUTABLE_SYMBOLS - symbols that must be defined for an
  21 #               executable (e.g., _DYNAMIC_LINK)
  22 #       TEXT_START_ADDR - the first byte of the text segment, after any
  23 #               headers.
  24 #       TEXT_BASE_ADDRESS - the first byte of the text segment.
  25 #       TEXT_START_SYMBOLS - symbols that appear at the start of the
  26 #               .text section.
  27 #       DATA_START_SYMBOLS - symbols that appear at the start of the
  28 #               .data section.
  29 #       DATA_END_SYMBOLS - symbols that appear at the end of the
  30 #               writeable data sections.
  31 #       OTHER_GOT_SYMBOLS - symbols defined just before .got.
  32 #       OTHER_GOT_SECTIONS - sections just after .got.
  33 #       OTHER_SDATA_SECTIONS - sections just after .sdata.
  34 #       OTHER_BSS_SYMBOLS - symbols that appear at the start of the
  35 #               .bss section besides __bss_start.
  36 #       DATA_PLT - .plt should be in data segment, not text segment.
  37 #       PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
  38 #       BSS_PLT - .plt should be in bss segment
  39 #       NO_REL_RELOCS - Don't include .rel.* sections in script
  40 #       NO_RELA_RELOCS - Don't include .rela.* sections in script
  41 #       NON_ALLOC_DYN - Place dynamic sections after data segment.
  42 #       TEXT_DYNAMIC - .dynamic in text segment, not data segment.
  43 #       EMBEDDED - whether this is for an embedded system.
  44 #       SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
  45 #               start address of shared library.
  46 #       INPUT_FILES - INPUT command of files to always include
  47 #       WRITABLE_RODATA - if set, the .rodata section should be writable
  48 #       INIT_START, INIT_END -  statements just before and just after
  49 #       combination of .init sections.
  50 #       FINI_START, FINI_END - statements just before and just after
  51 #       combination of .fini sections.
  52 #       STACK_ADDR - start of a .stack section.
  53 #       OTHER_SYMBOLS - symbols to place right at the end of the script.
  54 #       ETEXT_NAME - name of a symbol for the end of the text section,
  55 #               normally etext.
  56 #       SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
  57 #               so that .got can be in the RELRO area.  It should be set to
  58 #               the number of bytes in the beginning of .got.plt which can be
  59 #               in the RELRO area as well.
  60 #       USER_LABEL_PREFIX - prefix to add to user-visible symbols.
  61 #
  62 # When adding sections, do note that the names of some sections are used
  63 # when specifying the start address of the next.
  64 #
  65
  66 #  Many sections come in three flavours.  There is the 'real' section,
  67 #  like ".data".  Then there are the per-procedure or per-variable
  68 #  sections, generated by -ffunction-sections and -fdata-sections in GCC,
  69 #  and useful for --gc-sections, which for a variable "foo" might be
  70 #  ".data.foo".  Then there are the linkonce sections, for which the linker
  71 #  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
  72 #  The exact correspondences are:
  73 #
  74 #  Section      Linkonce section
  75 #  .text        .gnu.linkonce.t.foo
  76 #  .rodata      .gnu.linkonce.r.foo
  77 #  .data        .gnu.linkonce.d.foo
  78 #  .bss         .gnu.linkonce.b.foo
  79 #  .sdata       .gnu.linkonce.s.foo
  80 #  .sbss        .gnu.linkonce.sb.foo
  81 #  .sdata2      .gnu.linkonce.s2.foo
  82 #  .sbss2       .gnu.linkonce.sb2.foo
  83 #  .debug_info  .gnu.linkonce.wi.foo
  84 #  .tdata       .gnu.linkonce.td.foo
  85 #  .tbss        .gnu.linkonce.tb.foo
  86 #  .lrodata     .gnu.linkonce.lr.foo
  87 #  .ldata       .gnu.linkonce.l.foo
  88 #  .lbss        .gnu.linkonce.lb.foo
  89 #
  90 #  Each of these can also have corresponding .rel.* and .rela.* sections.
  91
  92 test -z "$ENTRY" && ENTRY=_start
  93 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  94 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
  95 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
  96 test -z "${ELFSIZE}" && ELFSIZE=32
  97 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
  98 test "$LD_FLAG" = "N" && DATA_ADDR=.
  99 test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
 100 test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
 101 test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
 102 test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
 103 test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
 104 DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
 105 DATA_SEGMENT_RELRO_END=""
 106 DATA_SEGMENT_END=""
 107 if test -n "${COMMONPAGESIZE}"; then
 108   DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
 109   DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
 110   DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
 111 fi
 112 if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
 113   INITIAL_READONLY_SECTIONS=".interp       ${RELOCATING-0} : { *(.interp) }"
 114 fi
 115 if test -z "$PLT"; then
 116   PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
 117 fi
 118 test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
 119 if test -z "$GOT"; then
 120   if test -z "$SEPARATE_GOTPLT"; then
 121     GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
 122   else
 123     GOT=".got          ${RELOCATING-0} : { *(.got) }"
 124     GOTPLT=".got.plt      ${RELOCATING-0} : { *(.got.plt) }"
 125   fi
 126 fi
 127 DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
 128 RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
 129 DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
 130 DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }"
 131 if test -z "${NO_SMALL_DATA}"; then
 132   SBSS=".sbss         ${RELOCATING-0} :
 133   {
 134     ${RELOCATING+${SBSS_START_SYMBOLS}}
 135     ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
 136     *(.dynsbss)
 137     *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
 138     *(.scommon)
 139     ${RELOCATING+${SBSS_END_SYMBOLS}}
 140   }"
 141   SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
 142   SDATA="/* We want the small data sections together, so single-instruction offsets
 143      can access them all, and initialized data all before uninitialized, so
 144      we can shorten the on-disk segment size.  */
 145   .sdata        ${RELOCATING-0} :
 146   {
 147     ${RELOCATING+${SDATA_START_SYMBOLS}}
 148     ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
 149     *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
 150   }"
 151   SDATA2=".sdata2       ${RELOCATING-0} :
 152   {
 153     ${RELOCATING+${SDATA2_START_SYMBOLS}}
 154     *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
 155   }"
 156   REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
 157   .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
 158   REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
 159   .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
 160   REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
 161   .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
 162   REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
 163   .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
 164 else
 165   NO_SMALL_DATA=" "
 166 fi
 167 if test -z "${DATA_GOT}"; then
 168   if test -n "${NO_SMALL_DATA}"; then
 169     DATA_GOT=" "
 170   fi
 171 fi
 172 if test -z "${SDATA_GOT}"; then
 173   if test -z "${NO_SMALL_DATA}"; then
 174     SDATA_GOT=" "
 175   fi
 176 fi
 177 test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
 178 test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
 179   .rel.ldata    ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
 180   .rela.ldata   ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
 181   .rel.lbss     ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
 182   .rela.lbss    ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
 183   .rel.lrodata  ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
 184   .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
 185 test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
 186   ${OTHER_BSS_SECTIONS}
 187   .lbss ${RELOCATING-0} :
 188   {
 189     *(.dynlbss)
 190     *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
 191     *(LARGE_COMMON)
 192   }"
 193 test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
 194   .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
 195   {
 196     *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
 197   }
 198   .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
 199   {
 200     *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
 201     ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
 202   }"
 203 CTOR=".ctors        ${CONSTRUCTING-0} :
 204   {
 205     ${CONSTRUCTING+${CTOR_START}}
 206     /* gcc uses crtbegin.o to find the start of
 207        the constructors, so we make sure it is
 208        first.  Because this is a wildcard, it
 209        doesn't matter if the user does not
 210        actually link against crtbegin.o; the
 211        linker won't look for a file to match a
 212        wildcard.  The wildcard also means that it
 213        doesn't matter which directory crtbegin.o
 214        is in.  */
 215
 216     KEEP (*crtbegin.o(.ctors))
 217     KEEP (*crtbegin?.o(.ctors))
 218
 219     /* We don't want to include the .ctor section from
 220        the crtend.o file until after the sorted ctors.
 221        The .ctor section from the crtend file contains the
 222        end of ctors marker and it must be last */
 223
 224     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
 225     KEEP (*(SORT(.ctors.*)))
 226     KEEP (*(.ctors))
 227     ${CONSTRUCTING+${CTOR_END}}
 228   }"
 229 DTOR=".dtors        ${CONSTRUCTING-0} :
 230   {
 231     ${CONSTRUCTING+${DTOR_START}}
 232     KEEP (*crtbegin.o(.dtors))
 233     KEEP (*crtbegin?.o(.dtors))
 234     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
 235     KEEP (*(SORT(.dtors.*)))
 236     KEEP (*(.dtors))
 237     ${CONSTRUCTING+${DTOR_END}}
 238   }"
 239 STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
 240   {
 241     ${RELOCATING+_stack = .;}
 242     *(.stack)
 243   }"
 244
 245 # if this is for an embedded system, don't add SIZEOF_HEADERS.
 246 if [ -z "$EMBEDDED" ]; then
 247    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
 248 else
 249    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
 250 fi
 251
 252 cat <<EOF
 253 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
 254               "${LITTLE_OUTPUT_FORMAT}")
 255 OUTPUT_ARCH(${OUTPUT_ARCH})
 256 ${RELOCATING+ENTRY(${ENTRY})}
 257
 258 ${RELOCATING+${LIB_SEARCH_DIRS}}
 259 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
 260 ${RELOCATING+${INPUT_FILES}}
 261 ${RELOCATING- /* For some reason, the Solaris linker makes bad executables
 262   if gld -r is used and the intermediate file has sections starting
 263   at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
 264   bug.  But for now assigning the zero vmas works.  */}
 265
 266 SECTIONS
 267 {
 268   /* Read-only sections, merged into text segment: */
 269   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
 270   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
 271   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
 272   ${INITIAL_READONLY_SECTIONS}
 273   .note.gnu.build-id : { *(.note.gnu.build-id) }
 274 EOF
 275
 276 test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN
 277 test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC=
 278 cat > ldscripts/dyntmp.$$ <<EOF
 279   ${TEXT_DYNAMIC+${DYNAMIC}}
 280   .hash         ${RELOCATING-0} : { *(.hash) }
 281   .gnu.hash     ${RELOCATING-0} : { *(.gnu.hash) }
 282   .dynsym       ${RELOCATING-0} : { *(.dynsym) }
 283   .dynstr       ${RELOCATING-0} : { *(.dynstr) }
 284   .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
 285   .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
 286   .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
 287 EOF
 288
 289 if [ "x$COMBRELOC" = x ]; then
 290   COMBRELOCCAT="cat >> ldscripts/dyntmp.$$"
 291 else
 292   COMBRELOCCAT="cat > $COMBRELOC"
 293 fi
 294 eval $COMBRELOCCAT <<EOF
 295   .rel.init     ${RELOCATING-0} : { *(.rel.init) }
 296   .rela.init    ${RELOCATING-0} : { *(.rela.init) }
 297   .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
 298   .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
 299   .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
 300   .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
 301   .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
 302   .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
 303   ${OTHER_READONLY_RELOC_SECTIONS}
 304   .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
 305   .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
 306   .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
 307   .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
 308   .rel.tdata    ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
 309   .rela.tdata   ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
 310   .rel.tbss     ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
 311   .rela.tbss    ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
 312   .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
 313   .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
 314   .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
 315   .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
 316   .rel.got      ${RELOCATING-0} : { *(.rel.got) }
 317   .rela.got     ${RELOCATING-0} : { *(.rela.got) }
 318   ${OTHER_GOT_RELOC_SECTIONS}
 319   ${REL_SDATA}
 320   ${REL_SBSS}
 321   ${REL_SDATA2}
 322   ${REL_SBSS2}
 323   .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
 324   .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
 325   ${REL_LARGE}
 326 EOF
 327
 328 if [ -n "$COMBRELOC" ]; then
 329 cat >> ldscripts/dyntmp.$$ <<EOF
 330   .rel.dyn      ${RELOCATING-0} :
 331     {
 332 EOF
 333 sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC >> ldscripts/dyntmp.$$
 334 cat >> ldscripts/dyntmp.$$ <<EOF
 335     }
 336   .rel.ifunc.dyn      ${RELOCATING-0} :
 337     {
 338       *(.rel.ifunc.*)
 339     }
 340   .rela.dyn     ${RELOCATING-0} :
 341     {
 342 EOF
 343 sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC >> ldscripts/dyntmp.$$
 344 cat >> ldscripts/dyntmp.$$ <<EOF
 345     }
 346   .rela.ifunc.dyn     ${RELOCATING-0} :
 347     {
 348       *(.rela.ifunc.*)
 349     }
 350 EOF
 351 fi
 352
 353 cat >> ldscripts/dyntmp.$$ <<EOF
 354   .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
 355   .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
 356   ${OTHER_PLT_RELOC_SECTIONS}
 357 EOF
 358
 359 if test -z "${NON_ALLOC_DYN}"; then
 360   if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then
 361     cat ldscripts/dyntmp.$$
 362   else
 363     if test -z "${NO_REL_RELOCS}"; then
 364       sed -e '/^[       ]*\.rela\.[^}]*$/,/}/d' -e '/^[         ]*\.rela\./d' ldscripts/dyntmp.$$
 365     fi
 366     if test -z "${NO_RELA_RELOCS}"; then
 367       sed -e '/^[       ]*\.rel\.[^}]*$/,/}/d' -e '/^[  ]*\.rel\./d' ldscripts/dyntmp.$$
 368     fi
 369   fi
 370   rm -f ldscripts/dyntmp.$$
 371 fi
 372
 373 cat <<EOF
 374   .init         ${RELOCATING-0} :
 375   {
 376     ${RELOCATING+${INIT_START}}
 377     KEEP (*(.init))
 378     ${RELOCATING+${INIT_END}}
 379   } =${NOP-0}
 380
 381   ${TEXT_PLT+${PLT}}
 382   ${TINY_READONLY_SECTION}
 383   .text         ${RELOCATING-0} :
 384   {
 385     ${RELOCATING+${TEXT_START_SYMBOLS}}
 386     *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
 387     /* .gnu.warning sections are handled specially by elf32.em.  */
 388     *(.gnu.warning)
 389     ${RELOCATING+${OTHER_TEXT_SECTIONS}}
 390   } =${NOP-0}
 391   .fini         ${RELOCATING-0} :
 392   {
 393     ${RELOCATING+${FINI_START}}
 394     KEEP (*(.fini))
 395     ${RELOCATING+${FINI_END}}
 396   } =${NOP-0}
 397   ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
 398   ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
 399   ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
 400   ${WRITABLE_RODATA-${RODATA}}
 401   .rodata1      ${RELOCATING-0} : { *(.rodata1) }
 402   ${CREATE_SHLIB-${SDATA2}}
 403   ${CREATE_SHLIB-${SBSS2}}
 404   ${OTHER_READONLY_SECTIONS}
 405   .eh_frame_hdr : { *(.eh_frame_hdr) }
 406   .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
 407   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
 408
 409   /* Adjust the address for the data segment.  We want to adjust up to
 410      the same address within the page on the next page up.  */
 411   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
 412   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
 413   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
 414
 415   /* Exception handling  */
 416   .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
 417   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
 418
 419   /* Thread Local Storage sections  */
 420   .tdata        ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
 421   .tbss         ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
 422
 423   .preinit_array   ${RELOCATING-0} :
 424   {
 425     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
 426     KEEP (*(.preinit_array))
 427     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
 428   }
 429   .init_array   ${RELOCATING-0} :
 430   {
 431      ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
 432      KEEP (*(SORT(.init_array.*)))
 433      KEEP (*(.init_array))
 434      ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
 435   }
 436   .fini_array   ${RELOCATING-0} :
 437   {
 438     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
 439     KEEP (*(.fini_array))
 440     KEEP (*(SORT(.fini_array.*)))
 441     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
 442   }
 443   ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
 444   ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
 445   .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
 446
 447   ${RELOCATING+${DATARELRO}}
 448   ${OTHER_RELRO_SECTIONS}
 449   ${TEXT_DYNAMIC-${DYNAMIC}}
 450   ${DATA_GOT+${RELRO_NOW+${GOT}}}
 451   ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
 452   ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
 453   ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
 454   ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
 455   ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
 456
 457   ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
 458
 459   .data         ${RELOCATING-0} :
 460   {
 461     ${RELOCATING+${DATA_START_SYMBOLS}}
 462     *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
 463     ${CONSTRUCTING+SORT(CONSTRUCTORS)}
 464   }
 465   .data1        ${RELOCATING-0} : { *(.data1) }
 466   ${WRITABLE_RODATA+${RODATA}}
 467   ${OTHER_READWRITE_SECTIONS}
 468   ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
 469   ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
 470   ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
 471   ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}
 472   ${SDATA_GOT+${GOT}}
 473   ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
 474   ${SDATA}
 475   ${OTHER_SDATA_SECTIONS}
 476   ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
 477   ${RELOCATING+__bss_start = .;}
 478   ${RELOCATING+${OTHER_BSS_SYMBOLS}}
 479   ${SBSS}
 480   ${BSS_PLT+${PLT}}
 481   .bss          ${RELOCATING-0} :
 482   {
 483    *(.dynbss)
 484    *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
 485    *(COMMON)
 486    /* Align here to ensure that the .bss section occupies space up to
 487       _end.  Align after .bss to ensure correct alignment even if the
 488       .bss section disappears because there are no input sections.
 489       FIXME: Why do we need it? When there is no .bss section, we don't
 490       pad the .data section.  */
 491    ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
 492   }
 493   ${OTHER_BSS_SECTIONS}
 494   ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
 495   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 496   ${LARGE_SECTIONS}
 497   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 498   ${RELOCATING+${OTHER_END_SYMBOLS}}
 499   ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
 500   ${RELOCATING+${DATA_SEGMENT_END}}
 501 EOF
 502
 503 if test -n "${NON_ALLOC_DYN}"; then
 504   if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then
 505     cat ldscripts/dyntmp.$$
 506   else
 507     if test -z "${NO_REL_RELOCS}"; then
 508       sed -e '/^[       ]*\.rela\.[^}]*$/,/}/d' -e '/^[         ]*\.rela\./d' ldscripts/dyntmp.$$
 509     fi
 510     if test -z "${NO_RELA_RELOCS}"; then
 511       sed -e '/^[       ]*\.rel\.[^}]*$/,/}/d' -e '/^[  ]*\.rel\./d' ldscripts/dyntmp.$$
 512     fi
 513   fi
 514   rm -f ldscripts/dyntmp.$$
 515 fi
 516
 517 cat <<EOF
 518   /* Stabs debugging sections.  */
 519   .stab          0 : { *(.stab) }
 520   .stabstr       0 : { *(.stabstr) }
 521   .stab.excl     0 : { *(.stab.excl) }
 522   .stab.exclstr  0 : { *(.stab.exclstr) }
 523   .stab.index    0 : { *(.stab.index) }
 524   .stab.indexstr 0 : { *(.stab.indexstr) }
 525
 526   .comment       0 : { *(.comment) }
 527
 528   /* DWARF debug sections.
 529      Symbols in the DWARF debugging sections are relative to the beginning
 530      of the section so we begin them at 0.  */
 531
 532   /* DWARF 1 */
 533   .debug          0 : { *(.debug) }
 534   .line           0 : { *(.line) }
 535
 536   /* GNU DWARF 1 extensions */
 537   .debug_srcinfo  0 : { *(.debug_srcinfo) }
 538   .debug_sfnames  0 : { *(.debug_sfnames) }
 539
 540   /* DWARF 1.1 and DWARF 2 */
 541   .debug_aranges  0 : { *(.debug_aranges) }
 542   .debug_pubnames 0 : { *(.debug_pubnames) }
 543
 544   /* DWARF 2 */
 545   .debug_info     0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
 546   .debug_abbrev   0 : { *(.debug_abbrev) }
 547   .debug_line     0 : { *(.debug_line) }
 548   .debug_frame    0 : { *(.debug_frame) }
 549   .debug_str      0 : { *(.debug_str) }
 550   .debug_loc      0 : { *(.debug_loc) }
 551   .debug_macinfo  0 : { *(.debug_macinfo) }
 552
 553   /* SGI/MIPS DWARF 2 extensions */
 554   .debug_weaknames 0 : { *(.debug_weaknames) }
 555   .debug_funcnames 0 : { *(.debug_funcnames) }
 556   .debug_typenames 0 : { *(.debug_typenames) }
 557   .debug_varnames  0 : { *(.debug_varnames) }
 558
 559   /* DWARF 3 */
 560   .debug_pubtypes 0 : { *(.debug_pubtypes) }
 561   .debug_ranges   0 : { *(.debug_ranges) }
 562
 563   ${TINY_DATA_SECTION}
 564   ${TINY_BSS_SECTION}
 565
 566   ${STACK_ADDR+${STACK}}
 567   ${ATTRS_SECTIONS}
 568   ${OTHER_SECTIONS}
 569   ${RELOCATING+${OTHER_SYMBOLS}}
 570   ${RELOCATING+${DISCARDED}}
 571 }
 572 EOF