2 # Unusual variables checked by this code:
3 # NOP - four byte opcode for no-op (defaults to 0)
4 # NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
6 # SMALL_DATA_CTOR - .ctors contains small data.
7 # SMALL_DATA_DTOR - .dtors contains small data.
8 # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
9 # INITIAL_READONLY_SECTIONS - at start of text segment
10 # OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
11 # (e.g., .PARISC.milli)
12 # OTHER_TEXT_SECTIONS - these get put in .text when relocating
13 # OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
14 # (e.g., .PARISC.global)
15 # OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
16 # (e.g. PPC32 .fixup, .got[12])
17 # OTHER_BSS_SECTIONS - other than .bss .sbss ...
18 # OTHER_SECTIONS - at the end
19 # EXECUTABLE_SYMBOLS - symbols that must be defined for an
20 # executable (e.g., _DYNAMIC_LINK)
21 # TEXT_START_ADDR - the first byte of the text segment, after any
23 # TEXT_BASE_ADDRESS - the first byte of the text segment.
24 # TEXT_START_SYMBOLS - symbols that appear at the start of the
26 # DATA_START_SYMBOLS - symbols that appear at the start of the
28 # DATA_END_SYMBOLS - symbols that appear at the end of the
29 # writeable data sections.
30 # OTHER_GOT_SYMBOLS - symbols defined just before .got.
31 # OTHER_GOT_SECTIONS - sections just after .got.
32 # OTHER_SDATA_SECTIONS - sections just after .sdata.
33 # OTHER_BSS_SYMBOLS - symbols that appear at the start of the
34 # .bss section besides __bss_start.
35 # DATA_PLT - .plt should be in data segment, not text segment.
36 # PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
37 # BSS_PLT - .plt should be in bss segment
38 # TEXT_DYNAMIC - .dynamic in text segment, not data segment.
39 # EMBEDDED - whether this is for an embedded system.
40 # SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
41 # start address of shared library.
42 # INPUT_FILES - INPUT command of files to always include
43 # WRITABLE_RODATA - if set, the .rodata section should be writable
44 # INIT_START, INIT_END - statements just before and just after
45 # combination of .init sections.
46 # FINI_START, FINI_END - statements just before and just after
47 # combination of .fini sections.
48 # STACK_ADDR - start of a .stack section.
49 # OTHER_SYMBOLS - symbols to place right at the end of the script.
50 # ETEXT_NAME - name of a symbol for the end of the text section,
52 # SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
53 # so that .got can be in the RELRO area. It should be set to
54 # the number of bytes in the beginning of .got.plt which can be
55 # in the RELRO area as well.
56 # USER_LABEL_PREFIX - prefix to add to user-visible symbols.
58 # When adding sections, do note that the names of some sections are used
59 # when specifying the start address of the next.
62 # Many sections come in three flavours. There is the 'real' section,
63 # like ".data". Then there are the per-procedure or per-variable
64 # sections, generated by -ffunction-sections and -fdata-sections in GCC,
65 # and useful for --gc-sections, which for a variable "foo" might be
66 # ".data.foo". Then there are the linkonce sections, for which the linker
67 # eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
68 # The exact correspondences are:
70 # Section Linkonce section
71 # .text .gnu.linkonce.t.foo
72 # .rodata .gnu.linkonce.r.foo
73 # .data .gnu.linkonce.d.foo
74 # .bss .gnu.linkonce.b.foo
75 # .sdata .gnu.linkonce.s.foo
76 # .sbss .gnu.linkonce.sb.foo
77 # .sdata2 .gnu.linkonce.s2.foo
78 # .sbss2 .gnu.linkonce.sb2.foo
79 # .debug_info .gnu.linkonce.wi.foo
80 # .tdata .gnu.linkonce.td.foo
81 # .tbss .gnu.linkonce.tb.foo
82 # .lrodata .gnu.linkonce.lr.foo
83 # .ldata .gnu.linkonce.l.foo
84 # .lbss .gnu.linkonce.lb.foo
86 # plus exception-handling information for Tensilica's XCC compiler:
87 # .xt_except_table .gnu.linkonce.e.foo
88 # .xt_except_desc .gnu.linkonce.h.foo
90 # plus Xtensa-specific literal sections:
91 # .literal .gnu.linkonce.literal.foo
92 # .lit4 .gnu.linkonce.lit4.foo
94 # plus Xtensa-specific "property table" sections:
95 # .xt.lit .gnu.linkonce.p.foo
96 # .xt.insn .gnu.linkonce.x.foo (obsolete)
97 # .xt.prop .gnu.linkonce.prop.foo
99 # Each of these can also have corresponding .rel.* and .rela.* sections.
101 test -z "$ENTRY" && ENTRY=_start
102 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
103 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
104 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
105 test -z "${ELFSIZE}" && ELFSIZE=32
106 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
107 test "$LD_FLAG" = "N" && DATA_ADDR=.
108 test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
109 test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
110 test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
111 test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
112 DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
113 DATA_SEGMENT_RELRO_END=""
115 if test -n "${COMMONPAGESIZE}"; then
116 DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
117 DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
118 DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
120 if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
121 INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
123 if test -z "$PLT"; then
124 PLT=".plt ${RELOCATING-0} : { *(.plt) }"
126 test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
127 if test -z "$GOT"; then
128 if test -z "$SEPARATE_GOTPLT"; then
129 GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
131 GOT=".got ${RELOCATING-0} : { *(.got) }"
132 GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }"
135 DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
136 RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
137 DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
138 STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
139 INIT_LIT=".init.literal 0 : { *(.init.literal) }"
140 INIT=".init 0 : { *(.init) }"
141 FINI_LIT=".fini.literal 0 : { *(.fini.literal) }"
142 FINI=".fini 0 : { *(.fini) }"
143 if test -z "${NO_SMALL_DATA}"; then
144 SBSS=".sbss ${RELOCATING-0} :
146 ${RELOCATING+${SBSS_START_SYMBOLS}}
147 ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
149 *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
151 ${RELOCATING+${SBSS_END_SYMBOLS}}
153 SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
154 SDATA="/* We want the small data sections together, so single-instruction offsets
155 can access them all, and initialized data all before uninitialized, so
156 we can shorten the on-disk segment size. */
157 .sdata ${RELOCATING-0} :
159 ${RELOCATING+${SDATA_START_SYMBOLS}}
160 ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
161 *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
163 SDATA2=".sdata2 ${RELOCATING-0} :
165 ${RELOCATING+${SDATA2_START_SYMBOLS}}
166 *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
168 REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
169 .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
170 REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
171 .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
172 REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
173 .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
174 REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
175 .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
179 if test -z "${DATA_GOT}"; then
180 if test -n "${NO_SMALL_DATA}"; then
184 if test -z "${SDATA_GOT}"; then
185 if test -z "${NO_SMALL_DATA}"; then
189 test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
190 test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
191 .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
192 .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
193 .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
194 .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
195 .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
196 .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
197 test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
198 ${OTHER_BSS_SECTIONS}
199 .lbss ${RELOCATING-0} :
202 *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
205 test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
206 .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
208 *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
210 .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
212 *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
213 ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
215 CTOR=".ctors ${CONSTRUCTING-0} :
217 ${CONSTRUCTING+${CTOR_START}}
218 /* gcc uses crtbegin.o to find the start of
219 the constructors, so we make sure it is
220 first. Because this is a wildcard, it
221 doesn't matter if the user does not
222 actually link against crtbegin.o; the
223 linker won't look for a file to match a
224 wildcard. The wildcard also means that it
225 doesn't matter which directory crtbegin.o
228 KEEP (*crtbegin.o(.ctors))
229 KEEP (*crtbegin?.o(.ctors))
231 /* We don't want to include the .ctor section from
232 the crtend.o file until after the sorted ctors.
233 The .ctor section from the crtend file contains the
234 end of ctors marker and it must be last */
236 KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
237 KEEP (*(SORT(.ctors.*)))
239 ${CONSTRUCTING+${CTOR_END}}
241 DTOR=".dtors ${CONSTRUCTING-0} :
243 ${CONSTRUCTING+${DTOR_START}}
244 KEEP (*crtbegin.o(.dtors))
245 KEEP (*crtbegin?.o(.dtors))
246 KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
247 KEEP (*(SORT(.dtors.*)))
249 ${CONSTRUCTING+${DTOR_END}}
251 STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
253 ${RELOCATING+_stack = .;}
257 # if this is for an embedded system, don't add SIZEOF_HEADERS.
258 if [ -z "$EMBEDDED" ]; then
259 test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
261 test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
267 ${RELOCATING+${LIB_SEARCH_DIRS}}
268 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
269 ${RELOCATING+${INPUT_FILES}}
270 ${RELOCATING- /* For some reason, the Solaris linker makes bad executables
271 if gld -r is used and the intermediate file has sections starting
272 at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
273 bug. But for now assigning the zero vmas works. */}
277 /* Read-only sections, merged into text segment: */
278 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
279 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
280 ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
281 ${INITIAL_READONLY_SECTIONS}
282 ${TEXT_DYNAMIC+${DYNAMIC}}
283 .hash ${RELOCATING-0} : { *(.hash) }
284 .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
285 .dynsym ${RELOCATING-0} : { *(.dynsym) }
286 .dynstr ${RELOCATING-0} : { *(.dynstr) }
287 .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
288 .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
289 .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
292 if [ "x$COMBRELOC" = x ]; then
295 COMBRELOCCAT="cat > $COMBRELOC"
297 eval $COMBRELOCCAT <<EOF
298 .rel.init ${RELOCATING-0} : { *(.rel.init) }
299 .rela.init ${RELOCATING-0} : { *(.rela.init) }
300 .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
301 .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
302 .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
303 .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
304 .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
305 .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
306 ${OTHER_READONLY_RELOC_SECTIONS}
307 .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
308 .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
309 .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
310 .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
311 .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
312 .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
313 .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
314 .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
315 .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
316 .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
317 .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
318 .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
319 .rel.got ${RELOCATING-0} : { *(.rel.got) }
320 .rela.got ${RELOCATING-0} : { *(.rela.got) }
321 ${OTHER_GOT_RELOC_SECTIONS}
326 .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
327 .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
330 if [ -n "$COMBRELOC" ]; then
332 .rel.dyn ${RELOCATING-0} :
335 sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
338 .rela.dyn ${RELOCATING-0} :
341 sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
347 .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
348 .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
349 ${OTHER_PLT_RELOC_SECTIONS}
351 ${RELOCATING-$INIT_LIT}
355 ${TINY_READONLY_SECTION}
356 .text ${RELOCATING-0} :
360 ${RELOCATING+${INIT_START}}
361 ${RELOCATING+KEEP (*(.init.literal))}
362 ${RELOCATING+KEEP (*(.init))}
363 ${RELOCATING+${INIT_END}}
365 ${RELOCATING+${TEXT_START_SYMBOLS}}
366 *(.literal .text .stub${RELOCATING+ .literal.* .text.* .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*})
367 KEEP (*(.text.*personality*))
368 /* .gnu.warning sections are handled specially by elf32.em. */
370 ${RELOCATING+${OTHER_TEXT_SECTIONS}}
372 ${RELOCATING+${FINI_START}}
373 ${RELOCATING+KEEP (*(.fini.literal))}
374 ${RELOCATING+KEEP (*(.fini))}
375 ${RELOCATING+${FINI_END}}
378 ${RELOCATING-$FINI_LIT}
381 ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
382 ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
383 ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
384 ${WRITABLE_RODATA-${RODATA}}
385 .rodata1 ${RELOCATING-0} : { *(.rodata1) }
386 ${CREATE_SHLIB-${SDATA2}}
387 ${CREATE_SHLIB-${SBSS2}}
388 ${OTHER_READONLY_SECTIONS}
389 .eh_frame_hdr : { *(.eh_frame_hdr) }
390 .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
391 .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
393 /* Adjust the address for the data segment. We want to adjust up to
394 the same address within the page on the next page up. */
395 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
396 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
397 ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
399 /* Exception handling */
400 .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
401 .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
403 /* Thread Local Storage sections */
404 .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
405 .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
407 .preinit_array ${RELOCATING-0} :
409 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
410 KEEP (*(.preinit_array))
411 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
413 .init_array ${RELOCATING-0} :
415 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
416 KEEP (*(SORT(.init_array.*)))
417 KEEP (*(.init_array))
418 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
420 .fini_array ${RELOCATING-0} :
422 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
423 KEEP (*(.fini_array))
424 KEEP (*(SORT(.fini_array.*)))
425 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
427 ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
428 ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
429 .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
431 ${RELOCATING+${DATARELRO}}
432 ${OTHER_RELRO_SECTIONS}
433 ${TEXT_DYNAMIC-${DYNAMIC}}
434 ${DATA_GOT+${RELRO_NOW+${GOT}}}
435 ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
436 ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
437 ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
438 ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
439 ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
441 ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
443 .data ${RELOCATING-0} :
445 ${RELOCATING+${DATA_START_SYMBOLS}}
446 *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
447 ${RELOCATING+KEEP (*(.gnu.linkonce.d.*personality*))}
448 ${CONSTRUCTING+SORT(CONSTRUCTORS)}
450 .data1 ${RELOCATING-0} : { *(.data1) }
451 ${WRITABLE_RODATA+${RODATA}}
452 ${OTHER_READWRITE_SECTIONS}
453 ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
454 ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
455 ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
456 ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}
458 ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
460 ${OTHER_SDATA_SECTIONS}
461 ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
462 ${RELOCATING+__bss_start = .;}
463 ${RELOCATING+${OTHER_BSS_SYMBOLS}}
466 .bss ${RELOCATING-0} :
469 *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
471 /* Align here to ensure that the .bss section occupies space up to
472 _end. Align after .bss to ensure correct alignment even if the
473 .bss section disappears because there are no input sections.
474 FIXME: Why do we need it? When there is no .bss section, we don't
475 pad the .data section. */
476 ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
478 ${OTHER_BSS_SECTIONS}
479 ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
480 ${RELOCATING+. = ALIGN(${ALIGNMENT});}
482 ${RELOCATING+. = ALIGN(${ALIGNMENT});}
483 ${RELOCATING+${OTHER_END_SYMBOLS}}
484 ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
485 ${RELOCATING+${DATA_SEGMENT_END}}
487 /* Stabs debugging sections. */
488 .stab 0 : { *(.stab) }
489 .stabstr 0 : { *(.stabstr) }
490 .stab.excl 0 : { *(.stab.excl) }
491 .stab.exclstr 0 : { *(.stab.exclstr) }
492 .stab.index 0 : { *(.stab.index) }
493 .stab.indexstr 0 : { *(.stab.indexstr) }
495 .comment 0 : { *(.comment) }
497 /* DWARF debug sections.
498 Symbols in the DWARF debugging sections are relative to the beginning
499 of the section so we begin them at 0. */
502 .debug 0 : { *(.debug) }
503 .line 0 : { *(.line) }
505 /* GNU DWARF 1 extensions */
506 .debug_srcinfo 0 : { *(.debug_srcinfo) }
507 .debug_sfnames 0 : { *(.debug_sfnames) }
509 /* DWARF 1.1 and DWARF 2 */
510 .debug_aranges 0 : { *(.debug_aranges) }
511 .debug_pubnames 0 : { *(.debug_pubnames) }
514 .debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
515 .debug_abbrev 0 : { *(.debug_abbrev) }
516 .debug_line 0 : { *(.debug_line) }
517 .debug_frame 0 : { *(.debug_frame) }
518 .debug_str 0 : { *(.debug_str) }
519 .debug_loc 0 : { *(.debug_loc) }
520 .debug_macinfo 0 : { *(.debug_macinfo) }
522 /* SGI/MIPS DWARF 2 extensions */
523 .debug_weaknames 0 : { *(.debug_weaknames) }
524 .debug_funcnames 0 : { *(.debug_funcnames) }
525 .debug_typenames 0 : { *(.debug_typenames) }
526 .debug_varnames 0 : { *(.debug_varnames) }
529 .debug_pubtypes 0 : { *(.debug_pubtypes) }
530 .debug_ranges 0 : { *(.debug_ranges) }
535 ${STACK_ADDR+${STACK}}
537 ${RELOCATING+${OTHER_SYMBOLS}}
538 ${RELOCATING+${STACKNOTE}}