1 /* Decimal context header module for the decNumber C Library.
2 Copyright (C) 2005, 2007, 2009 Free Software Foundation, Inc.
3 Contributed by IBM Corporation. Author Mike Cowlishaw.
5 This file is part of GCC.
7 GCC is free software; you can redistribute it and/or modify it under
8 the terms of the GNU General Public License as published by the Free
9 Software Foundation; either version 3, or (at your option) any later
12 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
13 WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 Under Section 7 of GPL version 3, you are granted additional
18 permissions described in the GCC Runtime Library Exception, version
19 3.1, as published by the Free Software Foundation.
21 You should have received a copy of the GNU General Public License and
22 a copy of the GCC Runtime Library Exception along with this program;
23 see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
24 <http://www.gnu.org/licenses/>. */
26 /* ------------------------------------------------------------------ */
27 /* Decimal Context module header */
28 /* ------------------------------------------------------------------ */
30 /* Context variables must always have valid values: */
32 /* status -- [any bits may be cleared, but not set, by user] */
33 /* round -- must be one of the enumerated rounding modes */
35 /* The following variables are implied for fixed size formats (i.e., */
36 /* they are ignored) but should still be set correctly in case used */
37 /* with decNumber functions: */
39 /* clamp -- must be either 0 or 1 */
40 /* digits -- must be in the range 1 through 999999999 */
41 /* emax -- must be in the range 0 through 999999999 */
42 /* emin -- must be in the range 0 through -999999999 */
43 /* extended -- must be either 0 or 1 [present only if DECSUBSET] */
44 /* traps -- only defined bits may be set */
46 /* ------------------------------------------------------------------ */
48 #if !defined(DECCONTEXT)
50 #define DECCNAME "decContext" /* Short name */
51 #define DECCFULLNAME "Decimal Context Descriptor" /* Verbose name */
52 #define DECCAUTHOR "Mike Cowlishaw" /* Who to blame */
54 #include "gstdint.h" /* C99 standard integers */
55 #include <stdio.h> /* for printf, etc. */
56 #include <signal.h> /* for traps */
58 /* Extended flags setting -- set this to 0 to use only IEEE flags */
59 #if !defined(DECEXTFLAG)
60 #define DECEXTFLAG 1 /* 1=enable extended flags */
63 /* Conditional code flag -- set this to 0 for best performance */
64 #if !defined(DECSUBSET)
65 #define DECSUBSET 0 /* 1=enable subset arithmetic */
68 /* Context for operations, with associated constants */
70 DEC_ROUND_CEILING
, /* round towards +infinity */
71 DEC_ROUND_UP
, /* round away from 0 */
72 DEC_ROUND_HALF_UP
, /* 0.5 rounds up */
73 DEC_ROUND_HALF_EVEN
, /* 0.5 rounds to nearest even */
74 DEC_ROUND_HALF_DOWN
, /* 0.5 rounds down */
75 DEC_ROUND_DOWN
, /* round towards 0 (truncate) */
76 DEC_ROUND_FLOOR
, /* round towards -infinity */
77 DEC_ROUND_05UP
, /* round for reround */
78 DEC_ROUND_MAX
/* enum must be less than this */
80 #define DEC_ROUND_DEFAULT DEC_ROUND_HALF_EVEN;
83 int32_t digits
; /* working precision */
84 int32_t emax
; /* maximum positive exponent */
85 int32_t emin
; /* minimum negative exponent */
86 enum rounding round
; /* rounding mode */
87 uint32_t traps
; /* trap-enabler flags */
88 uint32_t status
; /* status flags */
89 uint8_t clamp
; /* flag: apply IEEE exponent clamp */
91 uint8_t extended
; /* flag: special-values allowed */
95 /* Maxima and Minima for context settings */
96 #define DEC_MAX_DIGITS 999999999
97 #define DEC_MIN_DIGITS 1
98 #define DEC_MAX_EMAX 999999999
99 #define DEC_MIN_EMAX 0
100 #define DEC_MAX_EMIN 0
101 #define DEC_MIN_EMIN -999999999
102 #define DEC_MAX_MATH 999999 /* max emax, etc., for math funcs. */
104 /* Classifications for decimal numbers, aligned with 754 (note that */
105 /* 'normal' and 'subnormal' are meaningful only with a decContext */
106 /* or a fixed size format). */
111 DEC_CLASS_NEG_NORMAL
,
112 DEC_CLASS_NEG_SUBNORMAL
,
115 DEC_CLASS_POS_SUBNORMAL
,
116 DEC_CLASS_POS_NORMAL
,
119 /* Strings for the decClasses */
120 #define DEC_ClassString_SN "sNaN"
121 #define DEC_ClassString_QN "NaN"
122 #define DEC_ClassString_NI "-Infinity"
123 #define DEC_ClassString_NN "-Normal"
124 #define DEC_ClassString_NS "-Subnormal"
125 #define DEC_ClassString_NZ "-Zero"
126 #define DEC_ClassString_PZ "+Zero"
127 #define DEC_ClassString_PS "+Subnormal"
128 #define DEC_ClassString_PN "+Normal"
129 #define DEC_ClassString_PI "+Infinity"
130 #define DEC_ClassString_UN "Invalid"
132 /* Trap-enabler and Status flags (exceptional conditions), and */
133 /* their names. The top byte is reserved for internal use */
136 #define DEC_Conversion_syntax 0x00000001
137 #define DEC_Division_by_zero 0x00000002
138 #define DEC_Division_impossible 0x00000004
139 #define DEC_Division_undefined 0x00000008
140 #define DEC_Insufficient_storage 0x00000010 /* [when malloc fails] */
141 #define DEC_Inexact 0x00000020
142 #define DEC_Invalid_context 0x00000040
143 #define DEC_Invalid_operation 0x00000080
145 #define DEC_Lost_digits 0x00000100
147 #define DEC_Overflow 0x00000200
148 #define DEC_Clamped 0x00000400
149 #define DEC_Rounded 0x00000800
150 #define DEC_Subnormal 0x00001000
151 #define DEC_Underflow 0x00002000
153 /* IEEE flags only */
154 #define DEC_Conversion_syntax 0x00000010
155 #define DEC_Division_by_zero 0x00000002
156 #define DEC_Division_impossible 0x00000010
157 #define DEC_Division_undefined 0x00000010
158 #define DEC_Insufficient_storage 0x00000010 /* [when malloc fails] */
159 #define DEC_Inexact 0x00000001
160 #define DEC_Invalid_context 0x00000010
161 #define DEC_Invalid_operation 0x00000010
163 #define DEC_Lost_digits 0x00000000
165 #define DEC_Overflow 0x00000008
166 #define DEC_Clamped 0x00000000
167 #define DEC_Rounded 0x00000000
168 #define DEC_Subnormal 0x00000000
169 #define DEC_Underflow 0x00000004
172 /* IEEE 754 groupings for the flags */
173 /* [DEC_Clamped, DEC_Lost_digits, DEC_Rounded, and DEC_Subnormal */
174 /* are not in IEEE 754] */
175 #define DEC_IEEE_754_Division_by_zero (DEC_Division_by_zero)
177 #define DEC_IEEE_754_Inexact (DEC_Inexact | DEC_Lost_digits)
179 #define DEC_IEEE_754_Inexact (DEC_Inexact)
181 #define DEC_IEEE_754_Invalid_operation (DEC_Conversion_syntax | \
182 DEC_Division_impossible | \
183 DEC_Division_undefined | \
184 DEC_Insufficient_storage | \
185 DEC_Invalid_context | \
186 DEC_Invalid_operation)
187 #define DEC_IEEE_754_Overflow (DEC_Overflow)
188 #define DEC_IEEE_754_Underflow (DEC_Underflow)
190 /* flags which are normally errors (result is qNaN, infinite, or 0) */
191 #define DEC_Errors (DEC_IEEE_754_Division_by_zero | \
192 DEC_IEEE_754_Invalid_operation | \
193 DEC_IEEE_754_Overflow | DEC_IEEE_754_Underflow)
194 /* flags which cause a result to become qNaN */
195 #define DEC_NaNs DEC_IEEE_754_Invalid_operation
197 /* flags which are normally for information only (finite results) */
199 #define DEC_Information (DEC_Clamped | DEC_Rounded | DEC_Inexact \
202 #define DEC_Information (DEC_Clamped | DEC_Rounded | DEC_Inexact)
205 /* IEEE 854 names (for compatibility with older decNumber versions) */
206 #define DEC_IEEE_854_Division_by_zero DEC_IEEE_754_Division_by_zero
207 #define DEC_IEEE_854_Inexact DEC_IEEE_754_Inexact
208 #define DEC_IEEE_854_Invalid_operation DEC_IEEE_754_Invalid_operation
209 #define DEC_IEEE_854_Overflow DEC_IEEE_754_Overflow
210 #define DEC_IEEE_854_Underflow DEC_IEEE_754_Underflow
212 /* Name strings for the exceptional conditions */
213 #define DEC_Condition_CS "Conversion syntax"
214 #define DEC_Condition_DZ "Division by zero"
215 #define DEC_Condition_DI "Division impossible"
216 #define DEC_Condition_DU "Division undefined"
217 #define DEC_Condition_IE "Inexact"
218 #define DEC_Condition_IS "Insufficient storage"
219 #define DEC_Condition_IC "Invalid context"
220 #define DEC_Condition_IO "Invalid operation"
222 #define DEC_Condition_LD "Lost digits"
224 #define DEC_Condition_OV "Overflow"
225 #define DEC_Condition_PA "Clamped"
226 #define DEC_Condition_RO "Rounded"
227 #define DEC_Condition_SU "Subnormal"
228 #define DEC_Condition_UN "Underflow"
229 #define DEC_Condition_ZE "No status"
230 #define DEC_Condition_MU "Multiple status"
231 #define DEC_Condition_Length 21 /* length of the longest string, */
232 /* including terminator */
234 /* Initialization descriptors, used by decContextDefault */
235 #define DEC_INIT_BASE 0
236 #define DEC_INIT_DECIMAL32 32
237 #define DEC_INIT_DECIMAL64 64
238 #define DEC_INIT_DECIMAL128 128
240 #define DEC_INIT_DECSINGLE DEC_INIT_DECIMAL32
241 #define DEC_INIT_DECDOUBLE DEC_INIT_DECIMAL64
242 #define DEC_INIT_DECQUAD DEC_INIT_DECIMAL128
244 /* decContext routines */
246 #include "decContextSymbols.h"
252 extern decContext
* decContextClearStatus(decContext
*, uint32_t);
253 extern decContext
* decContextDefault(decContext
*, int32_t);
254 extern enum rounding
decContextGetRounding(decContext
*);
255 extern uint32_t decContextGetStatus(decContext
*);
256 extern decContext
* decContextRestoreStatus(decContext
*, uint32_t, uint32_t);
257 extern uint32_t decContextSaveStatus(decContext
*, uint32_t);
258 extern decContext
* decContextSetRounding(decContext
*, enum rounding
);
259 extern decContext
* decContextSetStatus(decContext
*, uint32_t);
260 extern decContext
* decContextSetStatusFromString(decContext
*, const char *);
261 extern decContext
* decContextSetStatusFromStringQuiet(decContext
*, const char *);
262 extern decContext
* decContextSetStatusQuiet(decContext
*, uint32_t);
263 extern const char * decContextStatusToString(const decContext
*);
264 extern int32_t decContextTestEndian(uint8_t);
265 extern uint32_t decContextTestSavedStatus(uint32_t, uint32_t);
266 extern uint32_t decContextTestStatus(decContext
*, uint32_t);
267 extern decContext
* decContextZeroStatus(decContext
*);
This page took 0.034538 seconds and 4 git commands to generate.