libiberty/configure.in

   1 dnl Process this file with autoconf to produce a configure script
   2
   3 AC_PREREQ(2.13)
   4 AC_INIT(xmalloc.c)
   5
   6 # This works around the fact that libtool configuration may change LD
   7 # for this particular configuration, but some shells, instead of
   8 # keeping the changes in LD private, export them just because LD is
   9 # exported.  We don't use libtool yet, but some day we might, so...
  10 ORIGINAL_LD_FOR_MULTILIBS=$LD
  11
  12 dnl We use these options to decide which functions to include.
  13 AC_ARG_WITH(target-subdir,
  14 [  --with-target-subdir=SUBDIR      Configuring in a subdirectory for target])
  15 AC_ARG_WITH(build-subdir,
  16 [  --with-build-subdir=SUBDIR       Configuring in a subdirectory for build])
  17 AC_ARG_WITH(cross-host,
  18 [  --with-cross-host=HOST           Configuring with a cross compiler])
  19 AC_ARG_WITH(newlib,
  20 [  --with-newlib                    Configuring with newlib])
  21
  22 if test "${srcdir}" = "."; then
  23   if test -n "${with_build_subdir}"; then
  24     libiberty_topdir="${srcdir}/../.."
  25     with_target_subdir=
  26   elif test -z "${with_target_subdir}"; then
  27     libiberty_topdir="${srcdir}/.."
  28   else
  29     if test "${with_target_subdir}" != "."; then
  30       libiberty_topdir="${srcdir}/${with_multisrctop}../.."
  31     else
  32       libiberty_topdir="${srcdir}/${with_multisrctop}.."
  33     fi
  34   fi
  35 else
  36   libiberty_topdir="${srcdir}/.."
  37 fi
  38 AC_SUBST(libiberty_topdir)
  39 AC_CONFIG_AUX_DIR($libiberty_topdir)
  40
  41 dnl Very limited version of automake's enable-maintainer-mode
  42
  43 AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
  44   dnl maintainer-mode is disabled by default
  45   AC_ARG_ENABLE(maintainer-mode,
  46 [  --enable-maintainer-mode
  47                           enable make rules and dependencies not useful
  48                           (and sometimes confusing) to the casual installer],
  49       maintainer_mode=$enableval,
  50       maintainer_mode=no)
  51
  52 AC_MSG_RESULT($maintainer_mode)
  53
  54 if test "$maintainer_mode" = "yes"; then
  55   MAINT=''
  56   NOTMAINT='#'
  57 else
  58   MAINT='#'
  59   NOTMAINT=''
  60 fi
  61 AC_SUBST(MAINT)dnl
  62 AC_SUBST(NOTMAINT)dnl
  63
  64 # Do we have a single-tree copy of texinfo?  Even if we do, we can't
  65 # rely on it - libiberty is built before texinfo.
  66 AC_CHECK_PROG(MAKEINFO, makeinfo, makeinfo, )
  67 if test "x$MAKEINFO" = "x"; then
  68     MAKEINFO="@echo makeinfo missing; true"
  69     BUILD_INFO=
  70 else
  71     BUILD_INFO=info
  72     case x"`$MAKEINFO --version | grep 'GNU texinfo'`" in
  73       x*\ [[1-3]].* )
  74         MAKEINFO="@echo $MAKEINFO is too old, 4.0 or newer required; true"
  75         BUILD_INFO=
  76         AC_MSG_WARN([
  77 *** Makeinfo is too old. Info documentation will not be built.])
  78         ;;
  79     esac
  80 fi
  81 AC_SUBST(MAKEINFO)
  82 AC_SUBST(BUILD_INFO)
  83
  84 AC_CHECK_PROG(PERL, perl, perl, )
  85 if test x"$PERL" = x""; then
  86   HAVE_PERL='#'
  87 else
  88   HAVE_PERL=''
  89 fi
  90 AC_SUBST(HAVE_PERL)
  91
  92 AC_CANONICAL_HOST
  93
  94 dnl When we start using automake:
  95 dnl AM_INIT_AUTOMAKE(libiberty, 1.0)
  96
  97 dnl These must be called before AM_PROG_LIBTOOL, because it may want
  98 dnl to call AC_CHECK_PROG.
  99 AC_CHECK_TOOL(AR, ar)
 100 AC_CHECK_TOOL(RANLIB, ranlib, :)
 101
 102 LIB_AC_PROG_CC
 103
 104 AC_PROG_CC_C_O
 105 # autoconf is lame and doesn't give us any substitution variable for this.
 106 if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
 107   NO_MINUS_C_MINUS_O=yes
 108 else
 109   OUTPUT_OPTION='-o $@'
 110 fi
 111 AC_SUBST(NO_MINUS_C_MINUS_O)
 112 AC_SUBST(OUTPUT_OPTION)
 113
 114 AC_ISC_POSIX
 115 AC_C_CONST
 116 AC_C_INLINE
 117
 118 dnl When we start using libtool:
 119 dnl Default to a non shared library.  This may be overridden by the
 120 dnl configure option --enable-shared.
 121 dnl AM_DISABLE_SHARED
 122
 123 dnl When we start using libtool:
 124 dnl AM_PROG_LIBTOOL
 125
 126 dnl When we start using automake:
 127 dnl AM_CONFIG_HEADER(config.h:config.in)
 128 AC_CONFIG_HEADER(config.h:config.in)
 129
 130 dnl When we start using automake:
 131 dnl AM_MAINTAINER_MODE
 132 dnl AC_EXEEXT
 133
 134 dnl When we start using automake:
 135 dnl AM_PROG_INSTALL
 136 AC_PROG_INSTALL
 137
 138 . ${srcdir}/config.table
 139 host_makefile_frag=${frag}
 140 AC_SUBST_FILE(host_makefile_frag)
 141
 142 # It's OK to check for header files.  Although the compiler may not be
 143 # able to link anything, it had better be able to at least compile
 144 # something.
 145 AC_CHECK_HEADERS(sys/file.h sys/param.h limits.h stdlib.h string.h unistd.h strings.h sys/time.h time.h sys/resource.h sys/stat.h sys/mman.h fcntl.h alloca.h sys/pstat.h sys/sysmp.h sys/sysinfo.h machine/hal_sysinfo.h sys/table.h sys/sysctl.h sys/systemcfg.h)
 146 AC_HEADER_SYS_WAIT
 147 AC_HEADER_TIME
 148
 149 libiberty_AC_DECLARE_ERRNO
 150
 151 AC_CHECK_TYPE(uintptr_t, unsigned long)
 152
 153 if test $ac_cv_type_uintptr_t = yes
 154 then
 155   AC_DEFINE(HAVE_UINTPTR_T, 1, [Define if you have the \`uintptr_t' type.])
 156 fi
 157
 158 AC_TYPE_PID_T
 159
 160 # This is the list of functions which libiberty will provide if they
 161 # are not available on the host.
 162
 163 funcs="asprintf"
 164 funcs="$funcs atexit"
 165 funcs="$funcs basename"
 166 funcs="$funcs bcmp"
 167 funcs="$funcs bcopy"
 168 funcs="$funcs bsearch"
 169 funcs="$funcs bzero"
 170 funcs="$funcs calloc"
 171 funcs="$funcs clock"
 172 funcs="$funcs ffs"
 173 funcs="$funcs getcwd"
 174 funcs="$funcs getpagesize"
 175 funcs="$funcs index"
 176 funcs="$funcs insque"
 177 funcs="$funcs memchr"
 178 funcs="$funcs memcmp"
 179 funcs="$funcs memcpy"
 180 funcs="$funcs memmove"
 181 funcs="$funcs memset"
 182 funcs="$funcs mkstemps"
 183 funcs="$funcs putenv"
 184 funcs="$funcs random"
 185 funcs="$funcs rename"
 186 funcs="$funcs rindex"
 187 funcs="$funcs setenv"
 188 funcs="$funcs sigsetmask"
 189 funcs="$funcs strcasecmp"
 190 funcs="$funcs strchr"
 191 funcs="$funcs strdup"
 192 funcs="$funcs strncasecmp"
 193 funcs="$funcs strrchr"
 194 funcs="$funcs strstr"
 195 funcs="$funcs strtod"
 196 funcs="$funcs strtol"
 197 funcs="$funcs strtoul"
 198 funcs="$funcs tmpnam"
 199 funcs="$funcs vasprintf"
 200 funcs="$funcs vfprintf"
 201 funcs="$funcs vprintf"
 202 funcs="$funcs vsprintf"
 203 funcs="$funcs waitpid"
 204
 205 # Also in the old function.def file: alloca, vfork, getopt.
 206
 207 vars="sys_errlist sys_nerr sys_siglist _system_configuration"
 208
 209 checkfuncs="getrusage on_exit psignal strerror strsignal sysconf times sbrk gettimeofday"
 210 checkfuncs="$checkfuncs realpath canonicalize_file_name pstat_getstatic pstat_getdynamic sysmp"
 211 checkfuncs="$checkfuncs getsysinfo table sysctl"
 212
 213 # These are neither executed nor required, but they help keep
 214 # autoheader happy without adding a bunch of text to acconfig.h.
 215 if test "x" = "y"; then
 216   AC_CHECK_FUNCS(asprintf atexit basename bcmp bcopy bsearch bzero calloc clock)
 217   AC_CHECK_FUNCS(getcwd getpagesize index insque mkstemps memchr memcmp memcpy)
 218   AC_CHECK_FUNCS(memmove memset putenv random rename rindex sigsetmask)
 219   AC_CHECK_FUNCS(strcasecmp setenv strchr strdup strncasecmp strrchr strstr)
 220   AC_CHECK_FUNCS(strtod strtol strtoul tmpnam vasprintf vfprintf vprintf)
 221   AC_CHECK_FUNCS(vsprintf waitpid getrusage on_exit psignal strerror strsignal)
 222   AC_CHECK_FUNCS(sysconf times sbrk gettimeofday ffs)
 223   AC_CHECK_FUNCS(pstat_getstatic pstat_getdynamic sysmp getsysinfo table sysctl)
 224   AC_CHECK_FUNCS(realpath canonicalize_file_name)
 225   AC_DEFINE(HAVE_SYS_ERRLIST, 1, [Define if you have the sys_errlist variable.])
 226   AC_DEFINE(HAVE_SYS_NERR,    1, [Define if you have the sys_nerr variable.])
 227   AC_DEFINE(HAVE_SYS_SIGLIST, 1, [Define if you have the sys_siglist variable.])
 228   AC_DEFINE(HAVE__SYSTEM_CONFIGURATION, 1, [Define if you have the _system_configuration variable.])
 229 fi
 230
 231 # For each of these functions, if the host does not provide the
 232 # function we want to put FN.o in LIBOBJS, and if the host does
 233 # provide the function, we want to define HAVE_FN in config.h.
 234
 235 setobjs=
 236 CHECK=
 237 target_header_dir=
 238 if test -n "${with_target_subdir}"; then
 239
 240   # We are being configured as a target library.  AC_REPLACE_FUNCS
 241   # may not work correctly, because the compiler may not be able to
 242   # link executables.  Note that we may still be being configured
 243   # native.
 244
 245   # If we are being configured for newlib, we know which functions
 246   # newlib provide and which ones we will be expected to provide.
 247
 248   if test "x${with_newlib}" = "xyes"; then
 249     LIBOBJS="asprintf.o basename.o insque.o random.o strdup.o vasprintf.o"
 250
 251     for f in $funcs; do
 252       case "$f" in
 253         asprintf | basename | insque | random | strdup | vasprintf)
 254           ;;
 255         *)
 256           n=HAVE_`echo $f | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 257           AC_DEFINE_UNQUOTED($n)
 258           ;;
 259       esac
 260     done
 261
 262     # newlib doesnt provide any of the variables in $vars, so we
 263     # dont have to check them here.
 264
 265     # Of the functions in $checkfuncs, newlib only has strerror.
 266     AC_DEFINE_NOAUTOHEADER(HAVE_STRERROR)
 267
 268     setobjs=yes
 269
 270   fi
 271
 272   # We may wish to install the target headers somewhere.
 273   AC_ARG_ENABLE(install-libiberty,
 274   [  --enable-install-libiberty       Install headers for end users],
 275   enable_install_libiberty=$enableval,
 276   enable_install_libiberty=no)dnl
 277
 278   # Option parsed, now set things appropriately.
 279   case x"$enable_install_libiberty" in
 280     xyes|x)
 281       target_header_dir=libiberty
 282       ;;
 283     xno)
 284       target_header_dir=
 285       ;;
 286     *)
 287       # This could be sanity-checked in various ways...
 288       target_header_dir="${enable_install_libiberty}"
 289       ;;
 290   esac
 291
 292
 293 else
 294
 295    # Not a target library, so we set things up to run the test suite.
 296    CHECK=check-cplus-dem
 297
 298 fi
 299
 300 AC_SUBST(CHECK)
 301 AC_SUBST(target_header_dir)
 302
 303 case "${host}" in
 304   *-*-cygwin* | *-*-mingw*)
 305     AC_DEFINE_NOAUTOHEADER(HAVE_SYS_ERRLIST)
 306     AC_DEFINE_NOAUTOHEADER(HAVE_SYS_NERR)
 307     ;;
 308 esac
 309
 310 if test -z "${setobjs}"; then
 311   case "${host}" in
 312
 313   *-*-vxworks*)
 314     # Handle VxWorks configuration specially, since on VxWorks the
 315     # libraries are actually on the target board, not in the file
 316     # system.
 317     LIBOBJS="basename.o getpagesize.o insque.o random.o strcasecmp.o"
 318     LIBOBJS="$LIBOBJS strncasecmp.o strdup.o vfork.o waitpid.o vasprintf.o"
 319     for f in $funcs; do
 320       case "$f" in
 321         basename | getpagesize | insque | random | strcasecmp)
 322           ;;
 323         strncasecmp | strdup | vfork | waitpid | vasprintf)
 324           ;;
 325         *)
 326           n=HAVE_`echo $f | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 327           AC_DEFINE_UNQUOTED($n)
 328           ;;
 329       esac
 330     done
 331
 332     # VxWorks doesn't provide any of the variables in $vars, so we
 333     # don't have to check them here.
 334
 335     # Of the functions in $checkfuncs, VxWorks only has strerror.
 336     AC_DEFINE_NOAUTOHEADER(HAVE_STRERROR)
 337
 338     setobjs=yes
 339     ;;
 340
 341   esac
 342 fi
 343
 344 if test -z "${setobjs}"; then
 345
 346   case "${host}" in
 347
 348   *-*-cygwin*)
 349     # The Cygwin library actually uses a couple of files from
 350     # libiberty when it is built.  If we are building a native
 351     # Cygwin, and we run the tests, we will appear to have these
 352     # files.  However, when we go on to build winsup, we will wind up
 353     # with a library which does not have the files, since they should
 354     # have come from libiberty.
 355
 356     # We handle this by removing the functions the winsup library
 357     # provides from our shell variables, so that they appear to be
 358     # missing.
 359
 360     # DJ - only if we're *building* cygwin, not just building *with* cygwin
 361
 362     if test -n "${with_target_subdir}"
 363     then
 364       funcs="`echo $funcs | sed -e 's/random//'`"
 365       LIBOBJS="$LIBOBJS random.o"
 366       vars="`echo $vars | sed -e 's/sys_siglist//'`"
 367       checkfuncs="`echo $checkfuncs | sed -e 's/strsignal//' -e 's/psignal//'`"
 368     fi
 369     ;;
 370
 371   *-*-mingw32*)
 372     # Under mingw32, sys_nerr and sys_errlist exist, but they are
 373     # macros, so the test below won't find them.
 374     libiberty_cv_var_sys_nerr=yes
 375     libiberty_cv_var_sys_errlist=yes
 376     ;;
 377
 378   *-*-uwin*)
 379     # Under some versions of uwin, vfork is notoriously buggy and the test
 380     # can hang configure; on other versions, vfork exists just as a stub.
 381     # FIXME: This should be removed once vfork in uwin's runtime is fixed.
 382     ac_cv_func_vfork_works=no
 383     # Under uwin 2.0+, sys_nerr and sys_errlist exist, but they are
 384     # macros (actually, these are imported from a DLL, but the end effect
 385     # is the same), so the test below won't find them.
 386     libiberty_cv_var_sys_nerr=yes
 387     libiberty_cv_var_sys_errlist=yes
 388     ;;
 389
 390   *-*-*vms*)
 391     # Under VMS, vfork works very different than on Unix. The standard test
 392     # won't work, and it isn't easily adaptable. It makes more sense to
 393     # just force it.
 394     ac_cv_func_vfork_works=yes
 395     ;;
 396
 397   esac
 398
 399   # We haven't set the list of objects yet.  Use the standard autoconf
 400   # tests.  This will only work if the compiler works.
 401   AC_PROG_CC_WORKS
 402   AC_REPLACE_FUNCS($funcs)
 403   libiberty_AC_FUNC_C_ALLOCA
 404   AC_FUNC_VFORK
 405   if test $ac_cv_func_vfork_works = no; then
 406     LIBOBJS="$LIBOBJS vfork.o"
 407   fi
 408   # We only need _doprnt if we might use it to implement v*printf.
 409   if test $ac_cv_func_vprintf != yes \
 410      || test $ac_cv_func_vfprintf != yes \
 411      || test $ac_cv_func_vsprintf != yes; then
 412     AC_REPLACE_FUNCS(_doprnt)
 413   else
 414     AC_CHECK_FUNCS(_doprnt)
 415   fi
 416
 417   for v in $vars; do
 418     AC_MSG_CHECKING([for $v])
 419     AC_CACHE_VAL(libiberty_cv_var_$v,
 420       [AC_TRY_LINK([int *p;], [extern int $v []; p = $v;],
 421                    [eval "libiberty_cv_var_$v=yes"],
 422                    [eval "libiberty_cv_var_$v=no"])])
 423     if eval "test \"`echo '$libiberty_cv_var_'$v`\" = yes"; then
 424       AC_MSG_RESULT(yes)
 425       n=HAVE_`echo $v | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 426       AC_DEFINE_UNQUOTED($n)
 427     else
 428       AC_MSG_RESULT(no)
 429     fi
 430   done
 431   AC_CHECK_FUNCS($checkfuncs)
 432   libiberty_NEED_DECLARATION(canonicalize_file_name)
 433 fi
 434
 435 # Figure out which version of pexecute to use.
 436 case "${host}" in
 437      *-*-mingw* | *-*-winnt*)   pexecute=pex-win32.o  ;;
 438      *-*-msdosdjgpp*)           pexecute=pex-djgpp.o  ;;
 439      *-*-msdos*)                pexecute=pex-msdos.o  ;;
 440      *-*-os2-emx*)              pexecute=pex-os2.o    ;;
 441      *)                         pexecute=pex-unix.o   ;;
 442 esac
 443 AC_SUBST(pexecute)
 444
 445 libiberty_AC_FUNC_STRNCMP
 446
 447 # Install a library built with a cross compiler in $(tooldir) rather
 448 # than $(libdir).
 449 if test -z "${with_cross_host}"; then
 450   INSTALL_DEST=libdir
 451 else
 452   INSTALL_DEST=tooldir
 453 fi
 454 AC_SUBST(INSTALL_DEST)
 455
 456 # We need multilib support, but only if configuring for the target.
 457 AC_OUTPUT(Makefile testsuite/Makefile,
 458 [test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
 459 if test -n "$CONFIG_FILES"; then
 460   if test -n "${with_build_subdir}" || test -n "${with_target_subdir}"; then
 461     # FIXME: We shouldn't need to set ac_file
 462     ac_file=Makefile
 463     LD="${ORIGINAL_LD_FOR_MULTILIBS}"
 464     . ${libiberty_topdir}/config-ml.in
 465   fi
 466 fi],
 467 srcdir=${srcdir}
 468 host=${host}
 469 target=${target}
 470 with_target_subdir=${with_target_subdir}
 471 with_build_subdir=${with_build_subdir}
 472 with_multisubdir=${with_multisubdir}
 473 ac_configure_args="--enable-multilib ${ac_configure_args}"
 474 CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
 475 ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}"
 476 libiberty_topdir=${libiberty_topdir}
 477 )