1 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
3 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
4 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
5 (extract_mbe): Likewise.
7 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
9 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
11 * m10300-opc.c: First cut at UDF instructions.
13 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
15 * m32r-opc.c: Regenerate (remove semantic descriptions).
18 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
20 * arm-dis.c (print_insn_big_arm): Fix indentation.
21 (print_insn_little_arm): Likewise.
25 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
27 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
29 (print_insn_little_arm): Likewise.
32 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
34 Move all global state data into opcode table struct, and treat
35 opcode table as something that is "opened/closed".
36 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
37 (cgen_asm_init): Delete.
38 (cgen_set_parse_operand_fn): New function.
39 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
40 (cgen_dis_init): Delete.
41 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
42 (cgen_current_{opcode_table_mach,endian}): Delete.
44 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
45 * cgen-dis.in (all fns): Ditto.
46 * cgen-opc.in (all fns): Ditto.
48 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
51 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
53 * cgen-dis.in (print_normal): Split into two.
54 (print_address): New function.
55 (extract_insn_normal): Clarify insn_value arg.
56 (print_int_insn): Renamed from print_insn.
57 (print_insn): New arg.
58 (print_insn_@arch@): Open opcode table if not already done so.
59 Move reading of insn into print_insn.
62 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
64 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
68 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
70 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
71 accept an accumulator choice.
72 * m32r-opc.c,m32r-opc.h: Regenerate.
75 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
77 * m10300-opc.c: Add entries for "no_match_operands" field in
81 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
83 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
87 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
89 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
92 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
94 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
96 * m10300-opc.c: Add autoincrement memory loads/stores.
100 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
102 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
103 phmsubh respectively.
106 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
108 start-sanitize-cygnus
109 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
111 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
112 @arch_cgen_get_int_operand.
113 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
114 Update call to @arch@_cgen_insert_operand.
115 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
116 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
117 (extract_insn_normal): New arg `pc', callers updated.
118 Update call to @arch@_cgen_extract_operand.
119 (print_insn): Update call to CGEN_EXTRACT_FN.
121 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
124 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
126 * m10300-opc.c: Fix load to sp and store from sp for the am33.
127 Add more multimedia instructions.
129 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
131 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
136 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
138 * mips-opc.c (pref): Enabled for the r5900.
141 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
143 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
145 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
147 (OP_J): Remove unnecessary subtraction when 16-bit displacement
148 will be masked later.
151 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
153 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
156 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
158 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
159 from raw register #s to symbolic names to make debugging easier.
162 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
164 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
166 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
168 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
169 start-sanitize-cygnus
170 * Makefile.am (CGENDIR): Set via configure.
171 (CGEN): New variable.
172 (CGENFILES): object.scm renamed to cos.scm.
173 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
174 (stamp-m32r): Pass prefix to run-cgen.
175 * Makefile.in: Regenerate.
176 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
177 * cgen-dis.in: Ditto.
178 * cgen-opc.in: Ditto.
179 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
180 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
181 * configure: Regenerate.
185 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
187 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
189 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
191 * m10300-opc.c: Reorder more instructions so that we do not
192 accidentally match a mn10300 instruction when we really
193 wanted an am33 instruction.
196 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
198 * m10300-dis.c: Only recognize instructions from the currently
200 * m10300-opc.c: Add field indicating the particular variant of
201 the mn10300 each instruction is available on.
203 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
205 * configure.in: For bfd_vax_arch, build vax-dis.lo.
206 * Makefile.am: Rebuild dependencies.
207 (CFILES): Add vax-dis.c.
208 (ALL_MACHINES): Add vax-dis.lo.
209 * aclocal.m4: Rebuild with current libtool.
210 * configure, Makefile.in: Rebuild.
212 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
214 * vax-dis.c: New file, from work by Pauline Middelink
215 <middelin@polyware.iaf.nl>.
216 * disassemble.c (ARCH_vax): Define if ARCH_all.
217 (disassembler): Add case for ARCH_vax.
218 * makefile.vms: Support compilation on vms/vax.
221 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
223 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
224 the DVP_OPERAND_RELOC_11_S4 relocation.
228 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
230 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
232 (disassemble): Correctly handle FMT_D10 instructions.
234 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
235 am33 shift instructions.
237 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
239 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
240 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
242 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
243 (mn10300_opcodes): Reorder so as to try and select opcodes from
244 the core chip when multiple alternatives exist. Change several
245 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
246 "macbu" instructions. Fix typos in a couple DSP instructions too.
249 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
251 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
252 related to sign extension and the size of ints.
254 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
256 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
257 instructions. Support (sp) addressing mode by expanding it into
261 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
263 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
264 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
265 be used as immediate values.
269 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
271 * m10300-opc.c: Support 4 byte DSP instructions.
274 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
276 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
279 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
281 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
284 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
286 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
289 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
291 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
292 found on the mn10300.
295 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
297 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
300 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
302 * mips-dis.c (print_insn_little_mips): Previously, instruction
303 printing references the symbol table to determine whether the
304 instruction resides in a block regular instructions or mips16
305 instructions. However, when the disassembler gets used in other
306 environments where the symbol table is not present, we no longer
307 rely in the symbol table, rather, use the low bit of the
308 instructions address to guess. There should be no change for usage
309 of the disassembler in host based programse, gdb ,objdump.
310 (print_insn_big_mips): ditto.
311 (print_insn_mips): ditto
313 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
315 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
317 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
320 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
321 operands for the am33.
322 (mn10300_opcodes): Add new instructions from the am33.
324 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
326 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
328 * i386-dis.c (index16): Add '%' to register names. Use ','
331 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
333 * i386-dis.c: Don't print opcode suffix when we can figure out the
334 size (and gas can!) by register operands, or from the default
336 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
338 (dis386, dis386_twobyte, grps): Use new suffix macros.
339 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
340 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
341 order of cmps operands to agree with Intel docs. Correct operand
342 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
343 agree with Intel docs.
344 (print_insn_x86): Print orphan fwait before other prefixes.
345 Return correct byte count for orphan fwait with prefixes. Don't
346 print `bound' operands in reverse order.
347 (ckprefix): Stop accumulating prefixes if we get fwait.
348 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
350 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
352 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
353 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
355 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
357 Fix problems when bfd_vma is wider than long.
358 * i386-dis.c: Make op_address and start_pc unsigned.
359 (set_op): Make parameter unsigned.
360 (print_insn_x86): Cast to bfd_vma when passing a value to
362 * ns32k-dis.c (CORE_ADDR): Don't define.
363 (print_insn_ns32k): Change type of addr to bfd_vma. Use
364 bfd_scan_vma to read back address.
365 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
367 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
368 (NEXTULONG): New definition.
369 (print_insn_m68k): Avoid overflow when computing third argument of
371 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
372 Use disp instead of val to store offset values.
373 (print_indexed): Use base_disp instead of word to store base
374 displacement, to avoid overflow.
375 * m10300-dis.c (disassemble): Cast value to long when computing
376 pc-relative address, to get correct sign extension.
378 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
380 * m32r-opc.c: Regenerate.
382 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
384 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
385 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
387 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
389 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
391 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
393 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
395 (OP_DSreg): Rename from OP_DSSI.
396 (OP_ESreg): Rename from OP_ESDI.
397 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
399 (append_seg): Rename from append_prefix.
400 (ptr_reg): New function.
401 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
403 (PREFIX_ADDR): Rename from PREFIX_ADR.
404 (float_reg): Add non-broken opcodes for people who don't want
407 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
409 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
412 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
414 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
416 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
418 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
419 0; produce error message for shifts of size 32 (or 64 for 64-bit
420 shifts), because the hardware doesn't support them.
423 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
425 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
428 * vu0.h (sqc2): Fix opcode.
430 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
434 start-sanitize-cygnus
435 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
437 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
438 Change pinfo to use WR_HILO.
441 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
443 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
444 LONG_2, LONG_2b formats to use this new operand.
446 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
448 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
450 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
452 * sparc-dis.c (print_insn_sparc): big endian instruction / little
455 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
457 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
458 and SHORT_B3b formats to use Rb instead of Ra.
460 Add FLAG_MUL16 to MUL2XH opcode.
462 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
463 to existing 1.1.1 parallelisation prohibition procedure.
465 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
467 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
468 * cgen-dis.in (extract_normal): Likewise.
469 * m32r-asm.c,m32r-dis.c: Regenerate.
472 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
474 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
478 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
480 * mips-opc.c (multu1): Add two operand variant for the r5900.
483 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
485 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
486 with a shift count of 0.
489 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
491 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
493 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
495 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
496 (_print_insn_mips): Likewise.
497 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
501 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
503 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
504 (cgen_hw_lookup_by_num): New function.
507 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
510 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
512 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
514 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
516 * sparc-dis.c (print_insn_sparc): Always fetch instructions
517 as big-endian on SPARClite.
520 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
522 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
524 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
528 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
530 * d30v-opc.c (pre_defined_register): Remove alias for r0.
533 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
535 * mips-opc.c (break): Added 20-bit single-operand break
536 instruction for R5900 only.
539 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
541 * po/Make-in (install-info): New target.
543 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
545 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
546 * configure: Rebuild.
548 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
550 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
551 variety of ISA2 instructions to set bottom ten bits of trap code.
553 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
555 * Makefile.am (config.status): Add explicit target so that
556 config.status depends upon bfd/configure.in.
557 * Makefile.in: Rebuild.
559 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
561 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
562 instructions to set bottom ten bits of break code.
563 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
564 for above optional argument.
566 start-sanitize-cygnus
567 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
569 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
570 * m32r-opc.h: Regenerate.
573 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
575 * makefile.vms: Run dec c with /nodebug.
577 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
579 * Makefile.in: Rebuilt.
580 * Makefile.am: Regenerated dependencies with mkdep.
582 * opintl.h (_): Define as dgettext.
584 start-sanitize-cygnus
585 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
587 * configure.in: Add support for --enable-cgen-maint.
588 * Makefile.am (M32R_DEPS): New variable.
589 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
590 * aclocal.m4: Regenerate.
591 * Makefile.in: Regenerate.
592 * configure: Regenerate.
594 * Makefile.am (CGENFILES): Add minsn.scm.
597 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
599 * cgen-asm.c: Internationalised.
600 start-sanitize-cygnus
601 * cgen-asm.in: Internationalised.
602 * cgen-opc.in: Internationalised.
604 * m32r-asm.c: Internationalised.
605 * m32r-dis.c: Internationalised.
606 * m32r-opc.c: Internationalised.
608 * aclocal.m4: Regenerated.
609 * configure: Regenerated.
610 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
611 * Makefile.in: Rebuild.
612 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
613 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
615 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
617 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
619 * aclocal.m4, configure: Rebuild with current tools.
621 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
623 * opintl.h: New file - contains internationalisation macros used
624 by source files in this directory.
625 * po/: New subdirectory - contains internationalisation files.
626 * po/Make-in: New file - Makefile constructor.
627 * po/POTFILES.in: New file - list of files in opcodes directory
628 that should be scan for internationalisation macros.
629 * po/opcodes.pot: New file - list of internationisation strings
630 found in files mentioned in po/POTFILES.in.
631 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
632 entry. Add intl directory to include paths.
633 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
634 HAVE_STRCPY, HAVE_LC_MESSAGES
635 * configure.in: Add rule to build Makefile in po subdirectory.
636 * Makefile.in: Rebuilt.
637 * aclocal.m4: Rebuilt.
638 * config.in: Rebuilt.
639 * configure: Rebuilt.
640 * alpha-opc.c: Internationalised.
641 * arc-dis.c: Internationalised.
642 * arc-opc.c: Internationalised.
643 * arm-dis.c: Internationalised.
644 * cgen-asm.c: Internationalised.
645 * d30v-dis.c: Internationalised.
646 * dis-buf.c: Internationalised.
648 * dvp-dis.c: Internationalised.
649 * dvp-opc.c: Internationalised.
651 * h8300-dis.c: Internationalised.
652 * h8500-dis.c: Internationalised.
653 * i386-dis.c: Internationalised.
654 * m10200-dis.c: Internationalised.
655 * m10300-dis.c: Internationalised.
656 * m68k-dis.c: Internationalised.
657 * m88k-dis.c: Internationalised.
658 * mips-dis.c: Internationalised.
659 * ns32k-dis.c: Internationalised.
660 * opintl.h: Internationalised.
661 * ppc-opc.c: Internationalised.
662 * sparc-dis.c: Internationalised.
663 * v850-dis.c: Internationalised.
664 * v850-opc.c: Internationalised.
666 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
668 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
669 (asm_hash_table_entries): New variable.
670 (cgen_asm_init): Free asm_hash_table_entries.
671 (hash_insn_array,hash_insn_list): New functions.
672 (build_asm_hash_table): Use them. Hash macro insns as well.
673 (cgen_asm_lookup_insn): Update.
674 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
675 (dis_hash_table_entries): New variable.
676 (cgen_dis_init): Free dis_hash_table_entries.
677 (hash_insn_array,hash_insn_list): New functions.
678 (build_dis_hash_table): Use them. Hash macro insns as well.
679 (cgen_dis_lookup_insn): Update.
680 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
681 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
682 (cgen_macro_insn_count): New function.
683 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
684 All callers updated. Sanity check result of extract fn.
685 (@arch@_cgen_get_insn_operands): Change result type to void.
686 Delete args insn_value, length. New arg fields. All callers updated.
687 (@arch@_cgen_lookup_get_insn_operands): New function.
688 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
690 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
692 * i386-dis.c (OP_DSSI): Print segment override.
695 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
697 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
701 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
703 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
707 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
709 * vu0.h (vlqd, vlqi): Update per revised specs.
713 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
715 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
716 (vif_operands): Update.
717 (vif_get_unpackloc): Delete.
718 (state_vif_unpackloc{,_star_p}): Delete.
719 (dvp_opcode_init_parse): Update.
720 (vif_unpack_len_value): Avoid divide by zero.
724 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
726 * vu0.h: Specs changed for VCALLMSR bit pattern.
727 * mips-dis.c: (print_insn_arg) Matching change.
730 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
732 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
735 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
737 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
738 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
739 * configure.in: Define and substitute WIN32LDFLAGS and
741 * aclocal.m4: Rebuild with new libtool.
742 * configure, Makefile.in: Rebuild.
745 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
747 * vu0.h: Corrected bit pattern for VMAXI opcode.
750 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
752 * m32r-opc.c: Regenerate.
755 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
757 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
758 (dvp_expand_macro): Implement.
759 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
760 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
763 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
765 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
766 before trying to copy it.
767 * Makefile.in: Rebuild.
769 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
771 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
774 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
776 * m32r-opc.c: Fix bit patterns for SAT and SATB.
779 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
781 * ns32k-dis.c (bit_extract_simple): New function to extract bits
782 from an arbitrary valid buffer instead of fetching them on demand
784 (invalid_float): use bit_extract_simple() instead of bit_extract().
787 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
789 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
790 * m32r-opc.h: Add extra control registers.
793 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
795 From H.J. Lu <hjl@gnu.org>:
796 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
799 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
801 * Branched binutils 2.9.
803 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
805 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
806 disassembling last 4 bytes of a section.
808 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
810 Fix some gcc -Wall warnings:
811 * arc-dis.c (print_insn): Add casts to avoid warnings.
812 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
813 * d10v-dis.c (dis_long, dis_2_short): Likewise.
815 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
816 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
817 (parse_bc, parse_vfreg, parse_accdest): Likewise.
818 (parse_ffstreg, parse_vif_mode): Likewise.
820 * m10200-dis.c (disassemble): Likewise.
821 * m10300-dis.c (disassemble): Likewise.
822 * ns32k-dis.c (print_insn_ns32k): Likewise.
823 * ppc-opc.c (insert_ral, insert_ram): Likewise.
824 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
825 * cgen-opc.c (cgen_keyword_search_next): Likewise.
826 * d10v-dis.c (dis_long, dis_2_short): Likewise.
827 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
829 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
830 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
831 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
833 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
835 * tic80-dis.c (print_one_instruction): Likewise.
837 * w65-dis.c (print_operand): Likewise.
838 * z8k-dis.c (fetch_data): Likewise.
839 * a29k-dis.c: Add return type for find_byte_func_type.
840 * arc-opc.c: Include <stdio.h>. Remove declarations of
841 insert_multshift and extract_multshift.
842 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
844 (extract_value): Fully parenthesize expression.
846 * dvp-opc.c: Include <ctype.h>.
847 (print_sdest): Add default case to switch.
849 * h8500-dis.c (print_insn_h8500): Initialize local variables.
850 * h8500-opc.h (h8500_table): Fully bracket initializer.
851 * w65-opc.h (optable): Likewise.
852 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
853 * i386-dis.c (OP_E): Initialize local variables.
854 * m10200-dis.c (print_insn_mn10200): Likewise.
855 * mips-dis.c (print_insn_mips16): Likewise.
856 * sh-dis.c (print_insn_shx): Likewise.
857 * v850-dis.c (print_insn_v850): Likewise.
858 * ns32k-dis.c (print_insn_arg): Declare.
859 (get_displacement, invalid_float): Declare.
860 (list_search, sign_extend, flip_bytes): Declare return type.
861 (get_displacement): Likewise.
862 (print_insn_arg): Likewise. Make d int. Fix sprintf format
864 (print_insn_ns32k): Make i unsigned.
865 (invalid_float): Make static. Declare type of val.
866 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
867 on each for iteration.
868 * tic30-dis.c (get_indirect_operand): Likewise.
869 * z8k-dis.c (print_insn_z8001): Declare return type.
870 (print_insn_z8002): Likewise.
871 (unparse_instr): Fix sprintf format strings.
873 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
875 * mips-opc.c: Add "sync.l" and "sync.p".
878 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
880 * dvp-opc.c (extract_vif_datalen): Rewrite.
881 (vif_insn_len): Perform 0->max+1 conversion for direct length.
883 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
885 * dvp-dis.c (print_insn): Print unpack address in hex.
886 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
887 Don't skip over '*', just record it.
888 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
889 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
890 Don't skip over '*', just record it.
891 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
892 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
893 (vif_opcodes): Likewise.
894 (state_vif_{mpg,unpack}loc_star_p): New static locals.
895 (vif_macros,vif_macro_count): New globals.
896 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
897 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
898 (vif_get_wl_cl): New function.
899 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
902 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
904 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
905 default m68k variant to recognize.
907 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
908 (ctrl, cobr, mem, ea): Likewise.
909 (print_addr): Likewise. Remove cast.
910 (ea): Cast argument of print_addr to bfd_vma.
912 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
914 (cgen_parse_unsigned_integer): Likewise.
915 (cgen_parse_address): Likewise.
917 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
919 * i960-dis.c (ctrl): Add full braces to structure initialization.
920 (cobr, mem, reg): Likewise.
921 (ea): Correct parenthesization in expression.
923 * cgen-asm.c: Include <ctype.h>.
924 (build_asm_hash_table): Remove unused local variable i.
925 (cgen_parse_keyword): Add casts to avoid warnings.
927 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
928 symbol. Fix indentation.
929 (print_insn_little_arm): Likewise.
932 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
934 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
939 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
941 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
946 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
948 * dvp-opc.c (vif_operand_datalen_special): New global.
952 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
954 * vu0.h (vcallms): Use 'O' for call target operand.
955 * mips-dis.c (print_insn_arg): Handle 'O'.
958 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
960 * configure.in: Use AM_DISABLE_SHARED.
961 * aclocal.m4, configure: Rebuild with libtool 1.2.
964 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
966 * mips-dis.c: Change '%' to '#' in r5900 support.
970 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
972 These patches are courtesy of Jonathan Walton and Tony Thompson
973 (athompso@cambridge.arm.com).
975 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
978 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
979 both the offset and the label closest to the destination.
982 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
984 * vu0.h: New file with cop2/vu0 instructions.
985 * mips-opc.c: Include vu0.h.
986 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
988 (print_insn_mips): Do not emit a tab after an instruction if the
989 first arg is an instruction completer (&). If the next arg is an
990 escape character (%), then print the next arg verbatim.
991 * Makefile.am (mips-opc.lo): Depend on vu0.h
995 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
997 * dvp-opc.c (vif_opcodes): Add stcycl.
999 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1001 * dvp-dis.c (print_dma): Change length from 16 to 8.
1004 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1006 * m32r-opc.h: Regenerate.
1009 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1011 * dvp-opc.c (print_dest1): Print dest spec again.
1012 (print_vfreg,print_accdest): Likewise.
1013 (vif_unpack_len): Round result up to word boundary.
1016 start-sanitize-vr4320
1017 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1019 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1021 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1023 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1028 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1030 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1031 (print_insn): Do mask comparison on proper opcode word.
1032 Print unsigned values in hex.
1033 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1034 (parse_bc): Catch missing dest.
1035 (parse_vfreg): Replace atoi call with strtol.
1036 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1037 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1038 (extract_gif_eop): New function.
1039 (gif_operands): Update eop entry.
1040 (VGIFOP,VGIFNREGS): Fix calcs.
1041 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1042 (gif_regs): Add entry for unused 11 case.
1043 (print_gif_regs): Print empty list instead of nothing.
1044 (extract_gif_nloop): Fix value calc.
1045 (print_gif_nloop): Always print value, even if 0.
1046 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1047 (vif_operands): Use them for wl,cl fields.
1048 (state_vif_wl,state_vif_cl): New static locals.
1049 (parse_vif_mode): Handle numeric args.
1050 (vif_unpack_len_value,vif_unpack_len): New functions.
1051 (vif_insn_len): Call vif_unpack_len.
1054 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1056 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1058 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1060 * cgen-asm.in: Move insertion of generated routines to top of file.
1061 (insert_normal): Add prototype. Delete `shift' arg.
1062 * cgen-dis.in: Move insertion of generated routines to top of file.
1063 (extract_normal): Add prototype. Delete `shift' arg.
1064 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1065 (print_keyword): Add prototype. Fix type of `attrs' arg.
1067 start-sanitize-vr4320
1068 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1070 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1071 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1074 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1076 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1077 assume that info->symbols is non-empty.
1079 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1081 * alpha-opc.c (cvtqs) There is no such thing.
1082 (cvttq): Missing most of the /*d variants.
1084 start-sanitize-r5900
1085 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1087 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1089 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1090 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1093 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1095 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1096 delayed branches or jumps.
1099 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1101 * dvp-opc.c (vif_operands): Add unpack[u] support.
1102 (vif_opcodes): Ditto.
1103 (*_vif_imrubits): Renamed from *_vif_imrbits.
1105 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1107 * dvp-dis.c (print_insn): Handle word number.
1108 Handle mips address vs vu address.
1109 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1110 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1111 ({insert,extract}_dma_addr): Fix word ofset.
1112 ({insert,print}_gif_regs): Fix encode/decode.
1115 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1117 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1119 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1120 * tic30-dis.c (print_branch): Likewise.
1122 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1123 * dvp-dis.c (dvp_info_mach_type): New function.
1124 (print_insn_dvp): Call it.
1125 (print_vif): Return length of 4 if mpg or direct insn so following
1126 insns get properly disabled.
1127 (print_gif): Fix word order.
1128 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1129 (gif_operands): Fix word order.
1130 (gif_opcodes): Likewise.
1131 ({insert,extract,print}_gif_regs): Likewise.
1132 (gif_regs): Add new register number/name changes.
1133 (dma_opcodes): Add dmarefe insn.
1136 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1138 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1139 saved_symbol code as it is no longer needed.
1141 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1143 * cgen-asm.c: Include symcat.h.
1144 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1146 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1149 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1151 * dvp-opc.c (extra_dma_flags): Fix typos.
1152 (dma_operands): Fix word numbers.
1153 (dma_opcodes): Likewise.
1154 ({insert,extract}_dma_flags): Likewise.
1157 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1159 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1162 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1164 * dvp-dis.c (print_gif): Complete.
1165 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1166 (state_gif_{nregs,regs,nloop}): New static locals.
1167 (*_gif_*): Complete.
1168 (dvp_opcode_init_{parse,print}): Init gif state locals.
1169 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1170 (vif_insn_len): Handle `unpack'.
1171 ({insert,extract}_dma_flags): Complete.
1174 start-sanitize-r5900
1175 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1177 * mips-opc.c (mula.s): Renamed from multa.s.
1180 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1182 * m32r-opc.[ch]: Regenerate.
1185 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1187 * dvp-opc.c (dma_operands): Rewrite.
1188 (dma_operand_{count,addr}): New globals.
1189 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1190 (insert_dma_addr): Insert value into insn.
1191 (extract_dma_addr): Extract value from insn.
1193 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1195 * dvp-dis.c (print_vu): Handle loi insns.
1196 (print_insn): Likewise.
1197 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1198 (vu_operands): Make LDEST1 a FAKE operand.
1199 (parse_dest1): Allow elided argument.
1200 (print_dest1): Don't print the argument.
1202 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1204 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1205 (print_vfreg): Don't print dest spec.
1206 (parse_accdest): Dest spec is optional.
1207 (print_accdest): Don't print dest spec.
1210 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1212 * Makefile.am (CGENFILES): Update.
1213 * Makefile.in: Regenerate.
1214 * cgen-asm.in (insert_normal): Result is error message now.
1215 Validate value to be inserted.
1216 (insert_insn_normal): Result is error message now.
1217 (@arch@_cgen_assemble_insn): Update.
1218 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1219 arguments. Don't perform validation here.
1220 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1222 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1224 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1225 operand instance list.
1226 * m32r-opc.c: Regenerate.
1228 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1230 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1231 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1233 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1235 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1237 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1239 * configure.in: Get the version number from BFD.
1240 * configure: Rebuild.
1242 From H.J. Lu <hjl@gnu.org>:
1243 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1244 * Makefile.in: Rebuild.
1246 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1248 * m32r-opc.c: Regenerate.
1249 * m32r-opc.h: Regenerate.
1251 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1253 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1254 Ignore ALIAS insns if asked to.
1255 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1256 * m32r-opc.c: Regenerate.
1259 * dvp.opc.c: Nicely format opcode tables.
1260 (vu_operands): New element UFLAGS.
1261 (parse_uflags,print_uflags): New functions.
1262 (vu_upper_opcodes): Add UFLAGS to all insns.
1265 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1267 Fix rac to accept only a0:
1268 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1269 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1270 Introduce OPERAND_GPR.
1271 * d10v-dis.c (print_operand): Likewise.
1273 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1275 * cgen-opc.in: New file.
1276 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1277 * Makefile.am (CGENFILES): Add cgen-opc.in.
1278 * Makefile.in: Regenerate.
1280 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1281 (cgen_hw_lookup): Make result const.
1283 * cgen-dis.in (*): Use PTR instead of void *.
1284 (print_insn): Delete unused vars `i', `syntax'.
1286 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1289 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1291 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1292 (vif_opcodes): Update renamed insns.
1293 * dvp-dis.c (*): Likewise.
1296 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1298 * configure, aclocal.m4: Rebuild with new libtool.
1300 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1302 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1303 instructions use a PC relative branch, not absolute.
1305 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1307 * configure.in: Set libtool_enable_shared rather than
1308 libtool_shared. Remove diversion hack.
1309 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1311 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1313 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1314 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1316 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1318 * tic30-dis.c: New file.
1319 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1320 * configure.in: Handle bfd_tic30_arch.
1321 * Makefile.am: Rebuild dependencies.
1322 (CFILES): Add tic30-dis.c
1323 (ALL_MACHINES): Add tic30-dis.lo.
1324 * configure, Makefile.in: Rebuild.
1326 start-sanitize-m32rx
1327 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1329 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1330 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1331 macwhi-a and macwlo-a instructions.
1335 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1337 * dvp-opc.c, fixed encoding of a bunch of instructions to
1338 be consistent with the asmvu assembler (and inconsistent
1339 with the specification).
1341 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1343 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1344 in the opcode table. The pkemscalf instruction must come first.
1346 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1348 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1351 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1353 * m32r-opc.h (HAVE_CPU_M32R): Define.
1356 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1358 * dvp-dis.c, dvp-opc.c: New files.
1359 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1360 * configure: Regenerate.
1361 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1362 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1363 (mips-dis.lo): Compile with @archdefs@.
1364 * Makefile.in: Regenerate.
1365 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1366 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1369 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1371 * v850-opc.c (insertion routines): If both alignment and size is
1372 wrong then report this.
1374 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1376 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1377 Only recognize instructions for the current target_processor.
1379 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1381 * d10v-dis.c (PC_MASK): Correct value.
1382 (print_operand): If there's a reloc, don't calculate the
1383 address because they could be in different sections.
1385 start-sanitize-cygnus
1386 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1388 * cgen.sh: Rewrite to be like simulator's version.
1389 * Makefile.am (cgen): Update call to cgen.sh.
1390 * Makefile.in: Regenerate
1393 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1395 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1396 instruction after the 4650's "mul" instruction; nobody's using the
1397 4010 these days. If object files someday indicate which processor
1398 variant they're intended for, we can do a better job at this.
1400 start-sanitize-r5900
1401 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1403 * mips-opc.c (c.lt.s): Add r5900 variant.
1407 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1409 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1410 table provided entry size. Use CGEN_INSN_MNEMONIC.
1411 (cgen_parse_keyword): Rewrite.
1412 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1413 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1414 * cgen-opc.c: Clean up pass over `struct foo' usage.
1415 (cgen_keyword_lookup_value): Handle "" entry.
1416 (cgen_keyword_add): Likewise.
1417 start-sanitize-cygnus
1418 * Makefile.am: Add cgen support.
1419 * Makefile.in: Regenerate.
1420 * configure.in: Add cgen support.
1421 * configure: Regenerate.
1422 * aclocal.m4: Regenerate.
1423 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1426 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1428 * mips-opc.c: Add FP_D to s.d instruction flags.
1430 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1432 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1434 start-sanitize-tic80
1435 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1437 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1438 PC relative offset forms before the 15 bit forms. An assembler command
1439 line option now chooses the default.
1442 start-sanitize-r5900
1443 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1445 * mips-opc.c: Add many missing r5900 instructions.
1448 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1450 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1451 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1453 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1455 * configure: Only build libopcodes shared if --enable-shared's value
1456 was `yes', or was set to `*opcodes*'.
1457 * aclocal.m4: Likewise.
1458 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1459 original source of this bit of code. It's not clear what the best fix
1462 start-sanitize-r5900
1463 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1465 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1467 start-sanitize-tic80
1468 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1470 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1471 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1472 offset forms before the 15 bit forms, to default to the long forms.
1475 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1477 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1479 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1481 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1482 symbol if none is present.
1483 (print_insn_big_arm): Prevent examination of stored symbol if
1486 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1488 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1490 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1492 * disassemble.c: Remove disasm_symaddr() function.
1494 * arm-dis.c: Use info->symbol instead of info->flags to determine
1495 if disassmbly should be in Thumb or Arm mode.
1497 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1499 * arm-dis.c: Add support for disassembling Thumb opcodes.
1500 (print_insn_thumb): New function.
1502 * disassemble.c (disasm_symaddr): New function.
1504 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1505 (thumb_opcodes): Table of Thumb opcodes.
1507 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1509 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1511 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1512 and 'v' as operand types.
1514 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1516 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1517 <olivier.carmona@di.epfl.ch>.
1518 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1519 which has a two word opcode with a one word argument.
1521 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1523 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1524 unsigned, not signed.
1525 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1527 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1529 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1530 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1531 (ftrv): Slay the cut-and-paste monster.
1533 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1535 * d10v-dis.c (print_operand):
1536 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1538 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1540 * d10v-opc.c (OPERAND_FLAG): Split into:
1541 (OPERAND_FFLAG, OPERAND_CFLAG) .
1545 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1547 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1548 field for all INSN_MACRO's.
1549 * mips16-opc.c: same
1551 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1553 * mips-opc.c (sync,cache): These are 3900 insns.
1555 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1557 sh-opc.h (sh_table): Remove ftst/nan.
1559 start-sanitize-cygnus
1560 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1562 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1563 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1565 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1569 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1571 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1572 Add tx49 insns and configury.
1575 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1577 * mips-opc.c (ffc, ffs): Fix mask.
1579 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1581 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1584 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1586 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1587 start-sanitize-cygnus
1588 Added VR5400 instructions.
1589 (N5): New cpu-id macro.
1591 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1593 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1595 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1596 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1598 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1600 * v850-dis.c (disassemble): Replace // with /* ... */
1602 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1604 * sparc-opc.c: Add wr & rd for v9a asr's.
1605 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1606 (v9a_asr_reg_names): New variable.
1607 Patch from David Miller <davem@vger.rutgers.edu>.
1609 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1611 * sparc-opc.c (v9notv9a): New insn type.
1612 (IMPDEP): Move to the end to not conflict with edge8 et al.
1613 Patch from David Miller <davem@vger.rutgers.edu>.
1615 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1617 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1619 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1621 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1623 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1625 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1626 of disassemble_info structure to determine if an overlay address
1627 has a matching symbol in low memory.
1629 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1630 new symbol_at_address_func field in disassemble_info structure.
1632 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1634 * v850-opc.c (extract_d22): Use signed arithmatic.
1636 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1638 * mips-opc.c: Three op mult is not an ISA insn.
1640 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1642 * mips-opc.c: Fix formatting.
1644 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1646 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1647 than assuming that char is signed. Explicitly sign extend 16 bit
1648 values, rather than assuming that short is 16 bits.
1649 (OP_sI, OP_J, OP_DIR): Likewise.
1651 start-sanitize-v850e
1652 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1654 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1658 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1660 * v850-opc.c: Fix typo in comment.
1662 * v850-dis.c (disassemble): Add test of processor type when
1663 determining opcodes.
1665 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1667 * configure.in: Use a diversion to set enable_shared before the
1668 arguments are parsed.
1669 * configure: Rebuild.
1671 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1673 * m68k-opc.c (TBL1): Use ! rather than `.
1674 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1676 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1678 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1680 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1682 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1685 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1686 * aclocal.m4: Rebuild with new libtool.
1687 * configure: Rebuild.
1689 start-sanitize-v850e
1690 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1692 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1695 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1697 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1699 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1701 * v850-opc.c (v850_opcodes): Further rearrangements.
1703 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1705 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1707 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1709 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1712 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1714 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1716 * mips16-opc.c: Added mips16 sdbbp.
1719 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1721 * v850-opc.c: Initialise processors field of v850_opcode structure.
1723 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1725 Merge changes from Martin Hunt:
1727 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1729 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1730 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1731 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1733 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1735 * d30v-dis.c (print_insn): First operand of d*i (delayed
1736 branch) instructions is relative.
1738 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1739 (d30v_operand_table): Add IMM6S3 type.
1740 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1742 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1743 and cmp instructions.
1745 * d30v-opc.c: Correct entries for repeat*, and sat*.
1746 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1747 types. Correct several formats.
1749 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1751 * d30v-opc.c (pre_defined_registers): Change control registers.
1753 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1754 SHORT_C2. Manual was incorrect.
1756 * d30v-dis.c (lookup_opcode): Return value now indicates
1757 if an opcode has a short and a long form. Used for deciding
1758 to append a ".s" or ".l".
1759 (print_insn): Append a ".s" to an instruction if it is
1760 the short form and ".l" if it is a long form. Do not append
1761 anything if the instruction has only one possible size.
1763 * d30v-opc.c: Change mulx2h to require an even register.
1764 New form: SHORT_A2; a SHORT_A form that needs an even
1765 register as the first operand.
1767 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1768 instruction was not being disassembled if there were an odd
1769 number of instructions.
1771 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1773 start-sanitize-v850e
1774 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1776 * v850-dis.c (disassemble): Improved display of register lists.
1779 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1781 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1782 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1783 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1784 fandnot1s, fandnot2s.
1786 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1788 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1790 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1792 * cgen-asm.c (cgen_parse_address): New argument resultp.
1793 All callers updated.
1794 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1796 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1798 * mn10200-dis.c (disassemble): PC relative instructions are
1799 relative to the next instruction, not the current instruction.
1801 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1803 * v850-dis.c (disassemble): Only signed extend values that are not
1804 returned by extract functions.
1805 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1807 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1809 * v850-opc.c: Update comments. Remove use of
1810 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1812 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1814 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1816 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1818 * configure: Rebuilt with latest devo autoconf for NT support.
1820 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1822 * v850-dis.c (disassemble): Use curly brace syntax for register
1825 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1826 where r0 is being used as a destination register.
1828 start-sanitize-v850e
1829 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1831 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1834 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1836 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1837 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1838 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1839 Add insns to access SGR and DBR.
1840 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1842 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1844 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1846 start-sanitize-v850e
1847 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1849 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1850 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1853 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1855 * configure (cgen_files): Add support for v850e target.
1856 * configure.in (cgen_files): Add support for v850e target.
1858 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1860 * configure (cgen_files): Add support for v850ea target.
1861 * configure.in (cgen_files): Add support for v850ea target.
1864 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1866 * configure.in (bfd_arc_arch): Add.
1867 * configure: Rebuild.
1868 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1869 * Makefile.in: Rebuild.
1870 * arc-dis.c, arc-opc.c: New files.
1871 * disassemble.c (ARCH_all): Define ARCH_arc.
1872 (disassembler): Add ARC support.
1874 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1876 start-sanitize-v850e
1877 * v850-dis.c (disassemble): Add support for v850EA instructions.
1879 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1880 (v850_opcodes): Add v850EA instructions.
1882 * v850-dis.c (disassemble): Add support for v850E instructions.
1884 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1885 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1886 insert_spe, extract_spe): New Functions.
1887 (v850_opcodes): Add v850E instructions.
1890 * v850-opc.c: Reorganised and re-layed out to improve readability
1893 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1895 * configure: Rebuild with autoconf 2.12.1.
1897 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1899 * aclocal.m4, configure: Rebuild with new automake patches.
1901 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1903 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1904 * acinclude.m4: Just include acinclude.m4 from BFD.
1905 * aclocal.m4, configure: Rebuild.
1907 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1909 * Makefile.am: New file, based on old Makefile.in.
1910 * acconfig.h: New file.
1911 * acinclude.m4: New file.
1912 * stamp-h.in: New file.
1913 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1914 Removed shared library handling; now handled by libtool. Replace
1915 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1916 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1917 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1918 handling in AC_OUTPUT.
1919 * dep-in.sed: Change .o to .lo.
1920 * Makefile.in: Now built with automake.
1921 * aclocal.m4: Now built with aclocal.
1922 * config.in, configure: Rebuild.
1924 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1926 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1928 start-sanitize-r5900
1929 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1931 * mips-opc.c: Fix coding of mtsa.
1934 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1936 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1938 * sparc-dis.c (sorted_opcodes): New static local.
1939 (struct opcode_hash): `opcode' is pointer to const element.
1940 (build_hash): First arg is now table of sorted pointers.
1941 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1942 (compare_opcodes): Update.
1944 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1946 * cgen-opc.c: #include <ctype.h>.
1947 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1948 Handle case insensitive hashing.
1949 (hash_keyword_value): Change type of `value' to unsigned int.
1951 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1953 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1954 precision FP, mark it as such. Likewise for double precision
1955 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1957 start-sanitize-r5900
1958 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1961 start-sanitize-r5900
1962 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1964 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1965 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1968 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1970 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1972 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1973 nesting depth when all the macros are expanded.
1975 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1977 * sparc-opc.c: The fcmp v9a instructions take an integer register
1978 as a destination, not a floating point register. From Christian
1979 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1981 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1983 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1984 syntax. From Roman Hodek
1985 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1987 * i386-dis.c (twobyte_has_modrm): Fix pand.
1989 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1991 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1993 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1995 * arm-dis.c: Add prototypes for arm_decode_shift and
1998 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2000 * mips-opc.c: Add r3900 insns.
2002 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2004 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2005 print delay slot instructions on the same line. When using a PC
2006 relative load, add a comment with the value being loaded if it can
2009 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2011 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2012 to pushS/popS for segment regs and byte constant so that
2013 pushw/popw printed when in 16 bit data mode.
2015 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2016 print cbtw, cwtd in 16 bit data mode.
2017 * i386-dis.c (putop): extra case W to support above.
2019 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2020 address size prefix in 16 bit address mode.
2022 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2024 * sh-dis.c: Reindent. Rename local variable fprintf to
2027 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2029 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2031 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2033 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2035 * mips16-opc.c (mip16_opcodes): same.
2037 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2039 * m68k-opc.c (moveb): Change $d to %d.
2041 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2043 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2044 (twobyte_has_modrm): Likewise.
2046 (OP_MMX, OP_EM, OP_MS): New static functions.
2048 * i386-dis.c: Revert patch of April 4. The output now matches
2051 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2053 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2056 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2058 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2060 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2062 * Makefile.in (install): Depend upon installdirs.
2063 (installdirs): New target.
2065 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2067 From Thomas Graichen <graichen@rzpd.de>:
2068 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2069 * configure: Rebuild.
2071 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2073 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2074 Delete string{,s}.h support.
2076 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2078 * cgen-asm.c (cgen_parse_operand_fn): New global.
2079 (cgen_parse_{{,un}signed_integer,address}): Update call to
2080 cgen_parse_operand_fn.
2081 (cgen_init_parse_operand): New function.
2082 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2083 from cgen_asm_init_parse.
2084 (m32r_cgen_assemble_insn): New operand `errmsg'.
2085 Delete call to as_bad, return error message to caller.
2086 (m32r_cgen_asm_hash_keywords): #if 0 out.
2088 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2090 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2092 [case 'J']: Fix typo in register name.
2094 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2096 * configure.in: Substitute SHLIB_LIBS.
2097 * configure: Rebuild.
2098 * Makefile.in (SHLIB_LIBS): New variable.
2099 ($(SHLIB)): Use $(SHLIB_LIBS).
2101 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2103 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2105 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2107 * disassemble.c (disassembler): Handle m32r.
2109 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2111 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2112 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2113 * Makefile.in (CFILES): Add them.
2114 (ALL_MACHINES): Add them.
2115 (dependencies): Regenerate.
2116 * configure.in (cgen_files): New variable.
2117 (bfd_m32r_arch): Add entry.
2118 * configure: Regenerate.
2120 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2122 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2123 * configure: Rebuild.
2125 * Makefile.in: Rebuild dependencies.
2127 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2129 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2132 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2134 * Branched binutils 2.8.
2136 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2138 * m10200-dis.c: Rename from mn10200-dis.c.
2139 * m10200-opc.c: Rename from mn10200-opc.c.
2140 * m10300-dis.c: Rename from mn10300-dis.c
2141 * m10300-opc.c: Rename from mn10300-opc.c.
2142 * Makefile.in: Update accordingly.
2144 * mips16-opc.c: Add mul and dmul macros.
2146 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2148 * makefile.vms: Update CFLAGS, add clean target.
2150 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2152 * mips-opc.c: Add "wait". From Ralf Baechle
2153 <ralf@gnu.ai.mit.edu>.
2155 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2156 * configure, config.in: Rebuild.
2157 * sysdep.h: Include <stdlib.h> if it exists.
2158 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2160 * Makefile.in: Rebuild dependencies.
2162 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2164 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2165 Andrew Bray <andy@madhouse.demon.co.uk>.
2167 * mips-opc.c: Add cast when setting mips_opcodes.
2169 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2171 * v850-dis.c (disassemble): Fix sign extension problem.
2172 * v850-opc.c (extract_d*): Fix sign extension problems to make
2173 disassembly calculate branch offsets correctly.
2175 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2177 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2179 * mips-opc.c: Add dctr and dctw.
2181 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2183 * d30v-dis.c (print_insn): Change the way signed constants
2186 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2188 * Makefile.in (BFD_H): New variable.
2189 (HFILES): New variable.
2190 (CFILES): Add all C files.
2191 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2192 Delete old dependencies, and build new ones.
2193 * dep-in.sed: New file.
2195 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2197 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2199 start-sanitize-coldfire
2200 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2202 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2205 end-sanitize-coldfire
2206 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2208 * mn10200-opc.c: Change "trap" to "syscall".
2209 * mn10300-opc.c: Add new "syscall" instruction.
2211 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2213 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2214 mulul insns on the coldfire.
2216 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2218 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2219 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2220 (print_insn_little_arm): Likewise.
2222 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2224 Based on patches from H.J. Lu <hjl@lucon.org>:
2225 * i386-dis.c (fetch_data): Add prototype.
2226 * m68k-dis.c (fetch_data): Add prototype.
2227 (dummy_print_address): Add prototype. Make static.
2228 * ppc-opc.c (valid_bo): Add prototype.
2229 * sparc-dis.c (build_hash_table): Add prototype.
2230 (is_delayed_branch, compute_arch_mask): Add prototypes.
2231 (print_insn_sparc): Make several local variables const.
2232 (compare_opcodes): Change arguments to const PTR. Add prototype.
2233 * sparc-opc.c (arg): Change name field to be const.
2234 (lookup_name, lookup_value): Add prototypes. Change table and
2235 name parameters to be const.
2236 (sparc_encode_asi): Change name parameter to be const.
2237 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2238 (sparc_encode_sparclet_cpreg): Likewise.
2239 (sparc_decode_asi): Change return type to be const.
2240 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2241 (sparc_decode_sparclet_cpreg): Likewise.
2243 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2245 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2246 Solaris doesn't like the combined options, and the -f is
2248 (stamp-tshlink, install): Likewise.
2250 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2252 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2255 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2257 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2259 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2261 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2264 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2266 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2268 start-sanitize-tic80
2269 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2271 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2273 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2275 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2278 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2280 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2281 floatformat_to_double to make portable.
2282 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2285 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2287 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2288 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2290 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2292 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2293 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2295 start-sanitize-tic80
2296 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2298 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2299 (OFF_SL_BR_SCALED): ... to this, and added the flag
2300 TIC80_OPERAND_BASEREL to the flags word.
2301 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2305 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2307 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2308 Change mips_opcodes from const array to a pointer,
2309 and change bfd_mips_num_opcodes from const int to int,
2310 so that we can increase the size of the mips opcodes table
2313 start-sanitize-tic80
2314 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2316 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2317 store BITNUM values in the table in one's complement form
2318 to match behavior when assembler is given a raw numeric
2319 value for a BITNUM operand.
2320 * tic80-dis.c (print_operand_bitnum): Ditto.
2323 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2325 * d30v-opc.c: Removed references to FLAG_X.
2327 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2329 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2331 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2333 * Makefile.in: Added d30v object files.
2334 * configure: (bfd_d30v_arch) Rebuilt.
2335 * configure.in: (bfd_d30v_arch) Added new case.
2336 * d30v-dis.c: New file.
2337 * d30v-opc.c: New file.
2338 * disassemble.c (disassembler) Add entry for d30v.
2340 start-sanitize-tic80
2341 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2343 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2344 representations for the floating point BITNUM values.
2346 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2348 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2349 in the table in one's complement form, as they appear in the
2351 (tic80_symbol_to_value): Use macros to access predefined
2353 (tic80_value_to_symbol): Ditto.
2354 (tic80_next_predefined_symbol): New function.
2355 * tic80-dis.c (print_operand_bitnum): Remove code that did
2356 one's complement for BITNUM values.
2359 start-sanitize-r5900
2360 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2362 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2365 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2367 * makefile.vms: Remove 8 bit characters. Update to latest
2370 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2372 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2374 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2376 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2377 (IMM24_PCREL): Likewise.
2379 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2381 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2382 address for an extended PC relative instruction that is not a
2385 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2387 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2390 start-sanitize-tic80
2391 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2393 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2394 (tic80_opcodes): Sort entries so that long immediate forms
2395 come after short immediate forms, making it easier for
2396 assembler to select the right one for a given operand.
2399 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2401 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2403 (print_insn_mips16): Likewise.
2405 start-sanitize-r5900
2406 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2408 * mips-opc.c: add r5900.
2411 start-sanitize-tic80
2412 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2414 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2415 a symbol class that restricts translation to just that
2416 class (general register, condition code, etc).
2418 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2420 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2421 and REG_DEST_E for register operands that have to be
2422 an even numbered register. Add REG_FPA for operands that
2423 are one of the floating point accumulator registers.
2424 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2425 (tic80_opcodes): Change entries that need even numbered
2426 register operands to use the new operand table entries.
2427 Add "or" entries that are identical to "or.tt" entries.
2430 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2432 * mips16-opc.c: Add new cases of exit instruction for
2434 * mips-dis.c (print_mips16_insn_arg): Display floating point
2435 registers in operands of exit instruction. Print `$' before
2436 register names in operands of entry and exit instructions.
2438 start-sanitize-tic80
2439 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2441 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2442 pairs for all predefined symbols recognized by the assembler.
2443 Also used by the disassembling routines.
2444 (tic80_symbol_to_value): New function.
2445 (tic80_value_to_symbol): New function.
2446 * tic80-dis.c (print_operand_control_register,
2447 print_operand_condition_code, print_operand_bitnum):
2448 Remove private tables and use tic80_value_to_symbol function.
2451 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2453 * d10v-dis.c (print_operand): Change address printing
2454 to correctly handle PC wrapping. Fixes PR11490.
2456 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2458 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2461 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2463 * mips-dis.c (print_insn_mips16): Set insn_info information.
2464 (print_mips16_insn_arg): Likewise.
2466 * mips-dis.c (print_insn_mips16): Better handling of an extend
2467 opcode followed by an instruction which can not be extended.
2469 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2471 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2472 coldfire moveb instruction to not allow an address register as
2473 destination. Although the documentation does not indicate that
2474 this is invalid, experiments uncovered unexpected behavior.
2475 Added a comment explaining the situation. Thanks to Andreas
2476 Schwab for pointing this out to me.
2478 start-sanitize-tic80
2479 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2481 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2482 entries are presorted so that entries with the same mnemonic are
2483 adjacent to each other in the table. Sort the entries for each
2484 instruction so that this is true.
2487 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2489 * m68k-dis.c: Include <libiberty.h>.
2490 (print_insn_m68k): Sort the opcode table on the most significant
2491 nibble of the opcode.
2493 start-sanitize-tic80
2494 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2496 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2497 "vsub", "vst", "xnor", and "xor" instructions.
2498 (V_a1): Renamed from V_a, msb of accumulator reg number.
2499 (V_a0): Add macro, lsb of accumulator reg number.
2501 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2503 * tic80-dis.c (print_insn_tic80): Broke excessively long
2504 function up into several smaller ones and arranged for
2505 the instruction printing function to be callable recursively
2506 to print vector instructions that have both a load and a
2507 math instruction packed into a single opcode.
2508 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2509 to explain why it comes after the other vector opcodes.
2512 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2514 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2515 move insns to handle immediate operands.
2517 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2519 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2520 fix operand mask in the "moveml" entries for the coldfire.
2522 start-sanitize-tic80
2523 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2525 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2526 New macros for building vector instruction opcodes.
2527 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2528 FMT_LI, which were unused. The field is now a flags field.
2529 Remove some opcodes that are possible, but illegal, such
2530 as long immediate instructions with doubles for immediate
2531 values. Add "vadd" and "vld" instructions.
2533 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2535 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2536 the order more logical. Move the shift alias instructions ("rotl",
2537 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2538 interspersed with the regular sr.x and sl.x instructions. Add
2539 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2540 "sub", "subu", "swcr", and "trap".
2542 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2544 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2545 (OFF_SL_PC): Renamed from OFF_SL.
2546 (OFF_SS_BR): New operand type for base relative operand.
2547 (OFF_SL_BR): New operand type for base relative operand.
2548 (REG_BASE): New operand type for base register operand.
2549 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2550 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2551 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2553 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2554 10 char field, padded with spaces on rhs, rather than a string
2555 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2556 than old TIC80_OPERAND_RELATIVE. Add support for new
2557 TIC80_OPERAND_BASEREL flag bit.
2559 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2561 * tic80-dis.c (print_insn_tic80): Print floating point operands
2563 * tic80-opc.c (SPFI): Add single precision floating point
2564 immediate operand type.
2565 (ROTATE): Add rotate operand type for shifts.
2566 (ENDMASK): Add for shifts.
2567 (n): Macro for the 'n' bit.
2568 (i): Macro for the 'i' bit.
2569 (PD): Macro for the 'PD' field.
2570 (P2): Macro for the 'P2' field.
2571 (P1): Macro for the 'P1' field.
2572 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2576 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2578 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2579 adding in current address for pc-relative operands.
2581 start-sanitize-tic80
2582 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2584 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2585 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2586 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2587 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2588 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2589 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2590 (REG_SCALED, LSI_SCALED): New operand types.
2591 (E): New macro for 'E' bit at bit 27.
2592 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2593 opcodes, including the various size flavors (b,h,w,d) for
2594 the direct load and store instructions.
2596 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2598 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2600 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2601 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2602 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2603 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2604 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2605 masks with "MASK_* & ~M_*" to get the M bit reset.
2606 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2608 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2610 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2611 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2612 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2614 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2615 CC, SICR, and LICR table entries.
2616 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2617 "bcnd", and "brcr" opcodes.
2620 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2622 * ppc-opc.c (powerpc_operands): Make comment match the
2623 actual fields (no shift field).
2624 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2625 start-sanitize-tic80
2626 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2627 partial implementation, work in progress.
2628 * tic80-opc.c (tic80_operands): Begin construction operands table.
2629 (tic80_opcodes): Continue populating opcodes table and start
2630 filling in the operand indices.
2631 (tic80_num_opcodes): Add this.
2634 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2636 * m68k-opc.c: Add #B case for moveq.
2638 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2640 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2641 before they are used.
2643 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2645 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2646 for "breakpoint" instruction.
2648 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2650 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2651 (dep): Use ALL_CFLAGS rather than CFLAGS.
2653 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2655 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2658 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2660 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2661 start-sanitize-tic80
2662 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2665 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2667 * mips16-opc.c: Add "abs".
2669 start-sanitize-tic80
2670 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2672 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2673 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2674 (disassembler): Add bfd_arch_tic80 support to set disassemble
2675 to print_insn_tic80.
2676 * tic80-dis.c (print_insn_tic80): Add stub.
2678 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2680 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2681 * configure: Regenerate with autoconf.
2682 * tic80-dis.c: Add file.
2683 * tic80-opc.c: Add file.
2686 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2688 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2690 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2692 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2693 (mn10200_opcodes): Use it for some logicals and btst insns.
2694 Add "break" and "trap" instructions.
2696 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2698 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2700 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2702 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2703 relative load or add now depends upon whether the instruction is
2706 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2708 * mn10200-dis.c: Finish writing disassembler.
2709 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2710 Fix mask for "jmp (an)".
2712 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2713 handle endianness issues for mn10300.
2715 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2717 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2719 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2720 instruction. Fix opcode field for "movb (imm24),dn".
2722 * mn10200-opc.c (mn10200_operands): Fix insertion position
2725 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2727 * mn10200-opc.c: Create mn10200 opcode table.
2728 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2729 but moving along nicely.
2731 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2733 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2735 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2737 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2738 specifiers for fmovem* instructions.
2740 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2742 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2744 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2746 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2749 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2751 * mn10300-opc.c: Add some comments explaining the various
2754 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2756 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2758 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2761 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2762 operand specifiers in fmovm* instructions.
2764 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2766 * ppc-opc.c (insert_li): Give an error if the offset has the two
2767 least significant bits set.
2769 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2771 * mips-dis.c (print_insn_mips16): Separate the instruction from
2772 the arguments with a tab, not a space.
2774 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2776 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2779 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2782 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2784 * configure: Rebuild with autoconf 2.12.
2786 Add support for mips16 (16 bit MIPS implementation):
2787 * mips16-opc.c: New file.
2788 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2789 (mips16_reg_names): New static array.
2790 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2791 after seeing a 16 bit symbol.
2792 (print_insn_little_mips): Likewise.
2793 (print_insn_mips16): New static function.
2794 (print_mips16_insn_arg): New static function.
2795 * mips-opc.c: Add jalx instruction.
2796 * Makefile.in (mips16-opc.o): New target.
2797 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2798 * configure: Rebuild.
2800 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2802 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2803 operand specifiers in *save, *restore and movem* instructions.
2805 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2808 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2809 register operands for immediate arithmetic, not, neg, negx, and
2810 set according to condition instructions.
2812 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2813 specifier of the effective-address operand in immediate forms of
2814 arithmetic instructions. The specifier for the immediate operand
2815 notes how and where the constant will be stored.
2817 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2819 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2822 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2825 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2827 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2829 * mn10300-dis.c (disassemble): Handle register lists.
2831 * mn10300-opc.c: Fix handling of register list operand for
2832 "call", "ret", and "rets" instructions.
2834 * mn10300-dis.c (disassemble): Print PC-relative and memory
2835 addresses symbolically if possible.
2836 * mn10300-opc.c: Distinguish between absolute memory addresses,
2837 pc-relative offsets & random immediates.
2839 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2841 (disassemble): Handle SPLIT and EXTENDED operands.
2843 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2845 * mn10300-dis.c: Rough cut at printing some operands.
2847 * mn10300-dis.c: Start working on disassembler support.
2848 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2850 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2852 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2854 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2856 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2858 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2860 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2861 register argument is calls and jmp instructions.
2863 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2865 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2866 getx operand. Fix opcode for mulqu imm,dn.
2868 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2870 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2871 in MN10300_OPERAND_SPLIT operands for how many bits
2872 appear in the basic insn word. Add IMM32_HIGH24,
2873 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2874 (mn10300_opcodes): Use new operands as needed.
2876 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2877 for bset, bclr, btst instructions.
2878 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2880 * mn10300-opc.c (mn10300_operands): Remove many redundant
2881 operands. Update opcode table as appropriate.
2882 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2883 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2885 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2887 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2888 operands (for indexed load/stores). Fix bitpos for DI
2889 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2890 few instructions that insert immediates/displacements in the
2891 middle of the instruction. Add IMM8E for 8 bit immediate in
2892 the extended part of an instruction.
2893 (mn10300_operands): Use new opcodes as appropriate.
2895 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2897 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2898 sequential so the assembler never parallelizes it with
2901 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2903 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2904 a data/address register that appears in register field 0
2905 and register field 1.
2906 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2908 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2910 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2911 standard disassembly.
2913 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2914 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2915 Recategorize PALcode instructions.
2917 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2919 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2921 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2923 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2924 there are no operand types.
2926 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2928 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2930 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2932 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2934 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2936 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2938 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2939 and sst.w instructions.
2941 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2944 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2946 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2949 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2951 * ppc-opc.c (PPCPWR2): Define.
2952 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2955 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2957 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2958 field for movhu instruction.
2960 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2961 cast value to "long" not "signed long" to keep hpux10
2964 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2966 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2969 * mn10300-opc.c (FMT*): Remove definitions.
2971 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2972 for shift-by-register opcodes.
2974 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2975 into [AD][MN][01] for encoding the position of the register
2978 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2980 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2981 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2983 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2985 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2986 Fix various typos. Add "PAREN" operand.
2987 (MEM, MEM2): Define.
2988 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2989 operands. Fix several typos.
2991 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2994 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2996 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2997 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2999 (mn10300_opcodes): Break opcode format out into its own field.
3000 Update many operand fields to deal with signed vs unsigned
3001 issues. Fix one or two typos in the "mov" instruction
3002 opcode, mask and/or operand fields.
3004 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3006 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3007 m68851 wasn't reset.
3009 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3011 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3012 all opcodes. Very rough cut at operands for all opcodes.
3014 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3017 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3019 * mn10200-opc.c, mn10300-opc.c: New files.
3020 * mn10200-dis.c, mn10300-dis.c: New files.
3021 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3022 * disassemble.c: Break mn10x00 support into 10200 and 10300
3024 * configure.in: Likewise.
3025 * configure: Rebuilt.
3027 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3029 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3031 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3033 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3035 * disassemble (ARCH_mn10x00): Define.
3036 (disassembler): Handle bfd_arch_mn10x00.
3037 * configure.in: Recognize bfd_mn10x00_arch.
3038 * configure: Rebuilt.
3040 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3042 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3043 accordingly. Don't declare functions using op_rtn.
3045 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3047 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3048 params to be more standard.
3049 * (disassemble): Print absolute addresses and symbolic names for
3050 branch and jump targets.
3051 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3053 * (v850_opcodes): Add breakpoint insn.
3055 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3057 * m68k-opc.c: Move the fmovemx data register cases before the
3058 other cases, so that they get recognized before the data register
3059 does gets treated as a degenerate register list.
3061 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3063 * mips-opc.c: Add a case for "div" and "divu" with two registers
3064 and a destination of $0.
3066 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3068 * mips-dis.c (print_insn_arg): Add prototype.
3069 (_print_insn_mips): Ditto.
3071 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3073 * mips-dis.c (print_insn_arg): Print condition code registers as
3076 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3078 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3080 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3082 * v850-dis.c (disassemble): Make static. Provide prototype.
3084 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3086 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3089 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3091 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3092 ']' characters into the output stream.
3093 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3094 Add "memop" field to all opcodes (for the disassembler).
3095 Reorder opcodes so that "nop" comes before "mov" and "jr"
3096 comes before "jarl".
3098 * v850-dis.c (print_insn_v850): Fix typo in last change.
3100 * v850-dis.c (print_insn_v850): Properly handle disassembling
3101 a two byte insn at the end of a memory region when the memory
3102 region's size is only two byte aligned.
3104 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3106 * v850-dis.c (v850_reg_names): Define.
3107 (v850_sreg_names, v850_cc_names): Likewise.
3108 (disassemble): Very rough cut at printing operands (unformatted).
3110 * v850-opc.c (BOP_MASK): Fix.
3111 (v850_opcodes): Fix mask for jarl and jr.
3113 * v850-dis.c: New file. Skeleton for disassembler support.
3114 * Makefile.in Remove v850 references, they're not needed here.
3115 * configure.in: Add v850-dis.o when building v850 toolchains.
3116 * configure: Rebuilt.
3117 * disassemble.c (disassembler): Call v850 disassembler.
3119 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3120 (insert_d8_6, extract_d8_6): New functions.
3121 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3122 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3124 (IF4A, IF4B): Use "D7" instead of "D7S".
3125 (IF4C, IF4D): Use "D8_7" instead of "D8".
3126 (IF4E, IF4F): New. Use "D8_6".
3127 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3128 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3130 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3131 (v850_operands): Change D16 to D16_15, use special insert/extract
3132 routines. New new D16 that uses the generic insert/extract code.
3133 (IF7A, IF7B): Use D16_15.
3134 (IF7C, IF7D): New. Use D16.
3135 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3137 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3138 message. Issue an error if the branch offset is odd.
3140 * v850-opc.c: Add notes about needing special insert/extract
3141 for all the load/store insns, except "ld.b" and "st.b".
3143 * v850-opc.c (insert_d22, extract_d22): New functions.
3144 (v850_operands): Use insert_d22 and extract_d22 for
3146 (insert_d9): Fix range check.
3148 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3150 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3151 and set bits field to D9 and D22 operands.
3153 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3155 * v850-opc.c (v850_operands): Define SR2 operand.
3156 (v850_opcodes): "ldsr" uses R1,SR2.
3158 * v850-opc.c (v850_opcodes): Fix opcode specs for
3159 sld.w, sst.b, sst.h, sst.w, and nop.
3161 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3163 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3164 end of the opcode table.
3166 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3168 * d10v-opc.c (pre_defined_registers): Added register pairs,
3169 "r0-r1", "r2-r3", etc.
3171 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3173 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3174 Create I16U for an unsigned 16bit mmediate operand.
3175 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3177 * v850-opc.c (v850_operands): Define EP operand.
3178 (IF4A, IF4B, IF4C, IF4D): Use EP.
3180 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3181 with immediate operand, "movhi". Tweak "ldsr".
3183 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3184 correct. Get sld.[bhw] and sst.[bhw] closer.
3186 * v850-opc.c (v850_operands): "not" is a two byte insn
3188 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3190 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3192 * v850-opc.c (two): Get order of words correct.
3194 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3196 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3197 register source and destination operands.
3198 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3200 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3201 same thinko in "trap" opcode.
3203 * v850-opc.c (v850_opcodes): Add initializer for size field
3206 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3207 Add D8 for 8-bit unsigned field in short load/store insns.
3208 (IF4A, IF4D): These both need two registers.
3209 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3210 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3211 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3212 for "ldsr" and "stsr".
3213 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3216 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3217 short store word (sst.w).
3219 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3221 * v850-opc.c (v850_operands): Added insert and extract fields,
3222 pointers to functions that handle unusual operand encodings.
3224 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3226 * v850-opc.c (v850_opcodes): Enable "trap".
3228 * v850-opc.c (v850_opcodes): Fix order of displacement
3229 and register for "set1", "clr1", "not1", and "tst1".
3231 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3233 * v850-opc.c (v850_operands): Add "B3" support.
3234 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3237 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3239 * v850-opc.c: Close unterminated comment.
3241 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3243 * v850-opc.c (v850_operands): Add flags field.
3244 (v850_opcodes): add move opcodes.
3246 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3248 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3249 * configure: (bfd_v850v_arch) Add new case.
3250 * configure.in: (bfd_v850_arch) Add new case.
3251 * v850-opc.c: New file.
3253 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3255 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3257 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3259 * d10v-opc.c: Add additional information to the opcode
3260 table to help determinine which instructions can be done
3263 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3265 * mpw-make.sed: Update editing of include pathnames to be
3268 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3270 * arm-opc.h: Added "bx" instruction definition.
3272 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3274 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3276 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3278 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3280 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3282 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3284 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3286 * makefile.vms: Update for alpha-opc changes.
3288 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3290 * i386-dis.c (print_insn_i386): Actually return the correct value.
3291 (ONE, OP_ONE): #ifdef out; not used.
3293 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3295 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3296 Changed subi operand type to treat 0 as 16.
3298 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3300 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3303 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3305 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3306 memory transfer instructions. Add new format string entries %h and %s.
3307 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3310 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3312 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3313 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3315 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3317 * alpha-dis.c (print_insn_alpha_osf): Remove.
3318 (print_insn_alpha_vms): Remove.
3319 (print_insn_alpha): Make globally visible. Chose the register
3320 names based on info->flavour.
3321 * disassemble.c: Always return print_insn_alpha for the alpha.
3323 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3325 * d10v-dis.c (dis_long): Handle unknown opcodes.
3327 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3329 * d10v-opc.c: Changes to support signed and unsigned numbers.
3330 All instructions with the same name that have long and short forms
3331 now end in ".l" or ".s". Divs added.
3332 * d10v-dis.c: Changes to support signed and unsigned numbers.
3334 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3336 * d10v-dis.c: Change all functions to use info->print_address_func.
3338 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3340 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3341 move ccr/sr insns more strict so that the disassembler only
3342 selects them when the addressing mode is data register.
3344 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3345 * d10v-opc.c (pre_defined_registers): Declare.
3346 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3347 to pick a better name for the registers.
3349 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3351 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3352 operands for fexpand and fpmerge. From Christian Kuehnke
3353 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3355 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3357 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3358 print routine. Take new regnames and cpumask arguments.
3359 Kill the environment variable nonsense.
3360 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3361 (print_insn_alpha_vms): New function. Do VMS style regnames.
3362 * disassemble.c (disassembler): Test bfd flavour to pick
3363 between OSF and VMS routines. Default to OSF.
3365 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3367 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3368 * configure: Rebuild.
3369 * Makefile.in (install): Use @INSTALL_SHLIB@.
3371 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3373 * configure: (bfd_d10v_arch) Add new case.
3374 * configure.in: (bfd_d10v_arch) Add new case.
3375 * d10v-dis.c: New file.
3376 * d10v-opc.c: New file.
3377 * disassemble.c (disassembler) Add entry for d10v.
3379 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3381 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3382 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3384 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3386 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3387 distinguish between variants of the instruction set.
3388 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3389 distinguish between variants of the instruction set.
3391 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3393 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3394 the 8086 instruction set.
3395 * i386-dis.c: General cleanups. Make most things static. Add
3396 prototypes. Get rid of static variables aflags and dflags. Pass
3397 them as args (to almost everything).
3399 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3401 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3403 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3405 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3406 if the next arg is marked with SRC_IN_DST. Gross.
3408 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3409 we're looking for and find EXR.
3411 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3412 if we're looking for KBIT and we don't find it.
3414 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3417 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3418 3bit immediate operands.
3420 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3422 * Released binutils 2.7.
3424 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3425 <kkaempf@progis.ac-net.de>.
3427 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3429 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3431 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3433 * sparc-dis.c (print_insn_sparclite): New routine to print
3434 sparclite instructions.
3436 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3438 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3440 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3442 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3443 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3444 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3446 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3448 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3449 Use autoconf-set values.
3450 (docdir, oldincludedir): Removed.
3451 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3453 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3455 * alpha-opc.c: New file.
3456 * alpha-opc.h: Remove.
3457 * alpha-dis.c: Complete rewrite to use new opcode table.
3458 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3459 * configure: Rebuild with autoconf 2.10.
3460 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3461 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3463 (alpha-opc.o): New target.
3465 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3467 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3468 Set imm_added_to_rs1 even if the source and destination register
3471 * sparc-opc.c: Add some two operand forms of the wr instruction.
3473 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3475 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3478 * disassemble.c (disassembler): Handle H8/S.
3479 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3481 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3483 * sparc-opc.c: Add beq/teq as aliases for be/te.
3485 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3486 <sergei@msil.sps.mot.com>.
3488 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3490 * makefile.vms: New file.
3492 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3494 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3496 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3499 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3501 * i386-dis.c (OP_OFF): Call append_prefix.
3503 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3505 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3506 unsigned long to silence a warning from the Solaris PowerPC
3509 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3511 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3513 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3515 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3517 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3518 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3519 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3520 cpush, cpusha, cpull sparclet insns.
3522 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3524 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3526 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3528 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3529 Set F_FLOAT on other floating point instructions.
3531 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3533 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3535 (powerpc_opcodes): Add 860/821 specific SPRs.
3537 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3539 * configure.in: Permit --enable-shared to specify a list of
3540 directories. Set and substitute BFD_PICLIST.
3541 * configure: Rebuild.
3542 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3543 uses. Set to @BFD_PICLIST@.
3545 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3547 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3548 not "abs", which may be needed for the absolute in something
3549 like btst #0,@10:8. Print L_3 immediates separately from other
3550 immediates. Change ABSMOV reference to ABS8MEM.
3552 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3554 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3555 (current_arch_mask): New static global.
3556 (compute_arch_mask): New static function.
3557 (print_insn_sparc): Delete sparc_v9_p. New static local
3558 current_mach. Resort opcode table if current_mach changes.
3559 Generalize "insn not supported" test.
3560 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3561 Delete test for v9/!v9.
3562 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3564 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3565 (brfcx): Renamed to FBRX.
3566 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3567 coprocessor mnemonics are not supported on the sparclet).
3568 (condf): Renamed to CONDF.
3569 (SLCBCC2): Delete F_ALIAS flag.
3571 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3573 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3574 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3576 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3578 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3579 that the shared library version number is set correctly.
3581 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3583 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3584 Miles Bader <miles@gnu.ai.mit.edu>.
3585 * configure: Rebuild.
3587 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3589 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3592 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3594 * configure: Rebuild with autoconf 2.8.
3596 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3598 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3599 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3601 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3603 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3604 since they appear as targets in Makefile.in.
3605 * configure: Rebuild.
3607 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3609 * mpw-make.sed: Edit out shared library support bits.
3611 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3613 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3614 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3615 (sparc_opcodes): Add sparclet insns.
3616 (sparclet_cpreg_table): New static local.
3617 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3618 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3620 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3622 * i386-dis.c (index16): New static variable.
3623 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3625 (OP_indirE): Return result of OP_E.
3626 (OP_E): Check for 16 bit addressing mode, and disassemble
3627 correctly. Optimised 32 bit case a little. Don't print
3628 "(base,index,scale)" when sib specifies only an offset.
3630 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3632 * configure.in: Set and substitute SHLIB_DEP.
3633 * configure: Rebuild.
3634 * Makefile.in (SHLIB_DEP): New variable.
3635 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3636 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3637 COMMON_SHLIB, add them to piclist with appropriate modifications.
3638 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3639 here: just use piclist.
3641 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3643 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3644 (print_insn_sparc): Rewrite v9/not-v9 tests.
3645 (compare_opcodes): Likewise.
3646 * sparc-opc.c (MASK_<ARCH>): Define.
3647 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3648 (sparclet,v6notv9): Define.
3649 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3650 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3652 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3654 * configure.in: Call AC_PROG_CC before configure.host.
3655 * configure: Rebuild.
3657 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3659 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3661 * i386-dis.c (onebyte_has_modrm): New static array.
3662 (twobyte_has_modrm): New static array.
3663 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3665 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3667 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3670 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3672 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3675 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3677 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3678 m68010up, not just m68020up | cpu32.
3680 * Makefile.in (SONAME): New variable.
3681 ($(SHLINK)): Make a link to the transformed name, as well.
3682 (stamp-tshlink): New target.
3683 (install): Skip stamp-tshlink during install.
3685 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3687 * configure.in: Call AC_ARG_PROGRAM.
3688 * configure: Rebuild.
3689 * Makefile.in (program_transform_name): New variable.
3690 (install): Transform library name before installing it.
3692 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3694 * i960-dis.c (mem): Add HX dcinva instruction.
3696 Support for building as a shared library, based on patches from
3697 Alan Modra <alan@spri.levels.unisa.edu.au>:
3698 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3699 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3700 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3701 * configure: Rebuild.
3702 * Makefile.in (ALLLIBS): New variable.
3703 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3704 (COMMON_SHLIB, SHLINK): New variables.
3705 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3706 (STAGESTUFF): Remove variable.
3707 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3708 (stamp-piclist, piclist): New targets.
3709 ($(SHLIB), $(SHLINK)): New targets.
3710 ($(OFILES)): Depend upon stamp-picdir.
3711 (disassemble.o): Build twice if PICFLAG is set.
3712 (MOSTLYCLEAN): Add pic/*.o.
3713 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3714 (distclean): Remove pic and stamp-picdir.
3715 (install): Install shared libraries.
3716 (stamp-picdir): New target.
3718 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3720 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3721 Print unknown instruction as "unknown", rather than in hex.
3723 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3725 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3727 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3729 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3731 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3733 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3734 when necessary. From Ulrich Drepper
3735 <drepper@myware.rz.uni-karlsruhe.de>.
3737 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3739 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3740 sparc_num_opcodes. Update architecture enum values.
3741 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3742 (sparc_opcode_lookup_arch): New function.
3743 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3744 (sparc_opcodes): Add v9a shutdown insn.
3746 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3748 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3749 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3751 (print_insn_sparc64): Deleted.
3752 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3755 * sparc-opc.c (architecture_pname): Add v9a.
3757 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3759 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3760 incorrectly defined as 0x16 when it should be 0x15.
3761 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3762 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3763 excb (exception barrier) which is defined in the Alpha
3764 Architecture Handbook version 2.
3765 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3766 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3767 disassembled as or, for example.
3769 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3771 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3772 (_print_insn_mips): Change i from int to unsigned int.
3774 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3776 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3777 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3779 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3781 * i386-dis.c: Added Pentium Pro instructions.
3783 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3785 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3788 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3790 * sh-opc.h (sh_nibble_type): Added REG_B.
3791 (sh_arg_type): Added A_REG_B.
3792 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3794 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3796 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3798 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3800 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3802 * Makefile.in (distclean): Remove stamp-h. From Ronald
3803 F. Guilmette <rfg@monkeys.com>.
3805 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3807 From David Mosberger-Tang <davidm@azstarnet.com>:
3808 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3811 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3813 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3814 (sh_table): Added many SH3 opcodes.
3815 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3817 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3819 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3820 (subco,subco.): Mark this PPC, not PPCCOM.
3822 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3824 * configure: Rebuild with autoconf 2.7.
3826 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3828 * configure: Rebuild with autoconf 2.6.
3830 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3832 * configure.in: Sort list of architectures. Accept but do nothing
3833 for alliant, convex, pyramid, romp, and tahoe.
3835 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3837 * a29k-dis.c (print_special): Change num to unsigned int.
3839 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3841 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3844 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3846 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3847 * configure: Rebuilt.
3849 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3851 * configure.in: Add case for bfd_i860_arch.
3852 * configure: Rebuild.
3854 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3856 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3857 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3858 (NEXTDOUBLE): Likewise.
3859 (print_insn_m68k): Don't match fmoveml if there is more than one
3860 register in the list.
3861 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3863 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3865 * m68k-opc.c: Use #W rather than #w.
3866 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3868 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3870 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3871 and likewise for all the dbxx opcodes.
3873 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3875 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3877 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3879 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3880 the VR4100 specific instructions to the mips_opcodes structure.
3882 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3884 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3885 ugly Metrowerks bug in CW6, is fixed in CW7.
3887 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3889 * ppc-opc.c (whole file): Add flags for common/any support.
3891 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3893 * Makefile.in (BISON): Remove macro.
3894 (FLAGS_TO_PASS): Remove BISON.
3896 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3898 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3900 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3901 instructions that take no args by looking at the match mask.
3902 (print_insn_arg): Always print "%" before register names.
3903 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3904 [case '_']: Don't print "@#" before address.
3905 [case 'J']: Use "%s" as format string, not register name.
3906 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3908 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3910 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3913 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3915 From David Mosberger-Tang <davidm@azstarnet.com>
3917 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3918 (alpha_insn_set): added definitions for VAX floating point
3919 instructions (Unix compilers don't generate these, but handcoded
3920 assembly might still use them).
3922 * alpha-dis.c (print_insn_alpha): added support for disassembling
3923 the miscellaneous instructions in the Alpha instruction set.
3925 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3927 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3928 no longer create sysdep.h, sed ppc-opc.c to work around a
3929 serious Metrowerks C bug.
3930 * mpw-make.in: Remove.
3931 * mpw-make.sed: New file, used by mpw-configure to edit
3932 Makefile.in into an MPW makefile.
3934 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3936 * Makefile.in (maintainer-clean): New synonym for realclean.
3938 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3940 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3941 which use '0', '1', and '2' instead. Specify the proper size for
3942 a pmove immediate operand. Correct the pmovefd patterns to be
3943 moves to a register, not from a register.
3944 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3946 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3948 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3949 %psr, %wim, %tbr as F_NOTV9.
3951 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3953 * Makefile.in (Makefile): Just rebuild Makefile when running
3955 (config.h, stamp-h): New targets.
3956 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3957 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3958 rebuilding config.h.
3959 * configure: Rebuild.
3961 * mips-opc.c: Change unaligned loads and stores with "t,A"
3962 operands to use "t,A(b)".
3964 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3966 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3968 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3970 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3971 until 3 instead of until 2.
3973 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3975 * Makefile.in (ALL_CFLAGS): Define.
3976 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3977 (MOSTLYCLEAN): Add config.log.
3978 (distclean): Don't remove config.log.
3979 * configure.in: Substitute HDEFINES.
3980 * configure: Rebuild.
3982 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3984 * sh-opc.h (sh_arg_type): Add F_FR0.
3985 (sh_table, case fmac): Add F_FR0 as first argument.
3987 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3989 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3991 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3993 * sparc-dis.c: Remove all references to NO_V9.
3995 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3997 * aclocal.m4: Just include ../bfd/aclocal.m4.
3998 * configure: Rebuild.
4000 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4002 * sparc-dis.c (X_DISP19): Define.
4003 (print_insn, case 'G'): Use it.
4004 (print_insn, case 'L'): Sign extend displacement.
4006 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4008 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4009 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4010 host_makefile_frag or frags.
4011 * aclocal.m4: New file.
4012 * configure: Rebuild.
4013 * Makefile.in (INSTALL): Set to @INSTALL@.
4014 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4015 (INSTALL_DATA): Set to @INSTALL_DATA@.
4017 (AR_FLAGS): Set to rc rather than qc.
4018 (CC): Define as @CC@.
4019 (CFLAGS): Set to @CFLAGS@.
4020 (@host_makefile_frag@): Remove.
4021 (config.status): Remove dependency upon @frags@.
4023 * configure.in: ../bfd/config.bfd now just sets shell variables.
4024 Use them rather than looking through target Makefile fragments.
4025 * configure: Rebuild.
4027 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4029 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4031 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4033 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4034 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4037 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4038 (lookup_{name,value}): New functions.
4039 (prefetch_table): New static local.
4040 (sparc_{encode,decode}_prefetch): New functions.
4041 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4043 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4045 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4048 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4050 * sh-dis.c: Correct comment on first line of file.
4052 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4054 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4056 * sparc-opc.c (asi, membar): New static locals.
4057 (sparc_{encode,decode}_{asi,membar}): New functions.
4058 (sparc_opcodes, membar insn): Fix.
4059 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4060 Support decoding of membar masks.
4063 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4065 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4067 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4069 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4070 and likewise for the other branches. Add bhs as an alias for bcc,
4071 and likewise for the size variants. Add dbhs as an alias for
4074 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4076 * sh-opc.h (FP sts instructions): Update to match reality.
4078 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4080 * m68k-dis.c: (fpcr_names): Add % before all register names.
4081 (reg_names): Likewise.
4082 (print_insn_arg): Don't explicitly print % before register names.
4083 Add % before register names in static array names. In case 'r',
4084 print data registers as `@(Dn)', not `Dn@'. When printing a
4085 memory address, don't print @# before it.
4086 (print_indexed): Change base_disp and outer_disp from int to
4087 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4088 syntax. Sign extend 8 byte displacement correctly.
4089 (print_base): Print using MIT syntax. Print zpc when appropriate.
4090 Change parameter disp from int to bfd_vma.
4092 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4095 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4097 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4098 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4099 * sh-opc.h (sh_arg_type): Add new operand types.
4100 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4102 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4104 * Makefile.in (distclean): Remove generated file config.h.
4106 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4108 * Makefile.in (distclean): Remove generated file config.h.
4110 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4112 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4114 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4116 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4117 rather than numopcodes. Use m68k_opcodes rather than removed
4118 opcode function. Don't check F_ALIAS.
4119 (print_insn_arg): Change first parameter to be const char *.
4120 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4121 (m68k-opc.o): New target.
4122 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4123 * configure: Rebuild.
4125 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4127 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4128 (opcode_bits, opcode_hash_table): New variables.
4129 (opcodes_initialized): Renamed from opcodes_sorted.
4130 (build_hash_table): New function.
4131 (is_delayed_branch): Use hash table.
4132 (print_insn): Renamed from print_insn_sparc, made static.
4133 Build and use hash table. If !sparc64, ignore sparc64 insns,
4134 and vice-versa if sparc64.
4135 (print_insn_sparc, print_insn_sparc64): New functions.
4136 (compare_opcodes): Move sparc64 opcodes to end.
4137 Print commutative insns with constant second.
4138 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4140 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4142 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4143 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4144 avoids printing a delay slot in a delay slot.
4145 * sh-opc.h (sh_table): Fully bracket last entry.
4147 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4149 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4151 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4153 * configure.in: Get host_makefile_frag from ${srcdir}.
4155 * configure.in: Autoconfiscated. Check for string[s].h. Create
4156 config.h from config.in. Don't set up sysdep.h link.
4157 * sysdep.h: New file.
4158 * configure, config.in: New files, generated from configure.in.
4159 * Makefile.in: Updated to be processed autoconf-style.
4160 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4161 (Makefile): Depend on config.status.
4162 (config.status): New rule.
4163 * configure.bat: Update Makefile substitutions.
4165 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4167 * mips-opc.c (L1): Define.
4168 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4169 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4172 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4174 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4175 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4176 have multiple add units but only a single logical unit.
4178 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4179 shifted by 18, without any insertion or extraction function.
4180 (insert_cr, extract_cr): Remove.
4182 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4184 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4187 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4189 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4190 * sh-opc.h: Add copyright.
4192 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4194 * Makefile.in (crunch-m68k): Delete extra target accidentally
4195 checked in a while ago.
4197 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4199 * sh-opc.h (sh_table): Add SH3 support.
4201 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4203 * sh-opc.h: Added bsrf and braf.
4205 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4207 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4208 bogus [ls]fm{ea,fd} patterns.
4210 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4211 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4212 initialize it from memory. Make function static.
4213 (print_insn_{big,little}_arm): New functions.
4214 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4215 the correct endianness.
4217 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4219 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4222 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4224 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4225 17th, so that it builds again using GCC as the compiler.
4227 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4229 * mips-dis.c (print_insn_little_mips): Cast return value from
4230 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4231 expects an unsigned long, and that might be fewer words of
4232 argument storage (e.g., if bfd_vma is long long on a 32-bit
4234 (print_insn_big_mips): Likewise with bfd_getb32 value.
4235 (_print_insn_mips): Now static.
4237 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4239 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4240 gcc memory hog problem with initializer is fixed.
4242 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4244 Merge in support for Mac MPW as a host.
4245 (Old change descriptions retained for informational value.)
4247 * mpw-config.in (archname): Compute from the config.
4248 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4250 * mpw-config.in (target_arch): Compute from canonical target.
4251 (m68k, mips, powerpc, sparc): Add architectures.
4252 * mpw-make.in (disassemble.c.o): Add.
4253 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4255 * mpw-config.in (BFD_MACHINES): Set to a default value.
4256 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4258 * mpw-make.in (CSEARCH): Add extra-include to search path.
4260 * mpw-config.in (varargs.h): Don't create.
4261 (sysdep.h): Create using forward-include.
4262 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4264 * mpw-config.in: New file, MPW version of configure.in.
4265 * mpw-make.in: New file, MPW version of Makefile.in.
4267 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4269 * alpha-dis.c (print_insn_alpha): Put empty statement after
4272 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4274 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4275 (low_sign_extend): Likewise.
4276 (get_field): Delete unused function.
4277 (set_field, deposit_14, deposit_21): Likewise.
4279 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4281 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4284 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4286 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4288 * alpha-opc.h (OSF_ASMCODE): define
4289 print pal-code names as defined in App C of the
4290 Alpha Architecture Reference Manual
4292 * alpha-dis.c: cleaned up output
4293 print stylized code forms as defined in App A.4.3 of the
4294 Alpha Architecture Reference Manual
4296 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4298 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4300 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4303 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4305 * m68k-dis.c (opcode): New function. Returns address of opcode
4306 table entry given index, even if the opcode table was split to
4307 work around gcc bugs.
4308 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4310 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4311 (reg_names): Now const.
4312 (print_insn_arg): Arrays cacheFieldName and names now const.
4313 (print_indexed): Array scales now const.
4315 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4317 * ppc-opc.c: Sort recently added instructions by minor opcode
4318 number within major opcode number.
4320 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4322 * hppa-dis.c: Include libhppa.h.
4324 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4326 * mips-opc.c: Change dli to use M_DLI, and add dla.
4328 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4330 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4332 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4334 * mips-opc.c: Add r4650 mul instruction.
4336 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4338 * mips-opc.c: Add uld and usd macros for unaligned double load and
4341 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4343 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4344 mfdcr, mtdcr, icbt, iccci.
4346 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4348 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4349 signed char fields to shorts, more portable.
4351 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4353 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4354 char fields as signed chars, since they may have negative values.
4356 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4358 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4359 (mycroft@netbsd.org).
4361 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4363 From "Logg, Ed" <elogg@ea.com>:
4364 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4365 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4368 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4370 * ppc-opc.c: Changes based on patch from David Edelsohn
4371 <edelsohn@mhpcc.edu>.
4372 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4375 (insert_tbr): New static function.
4376 (extract_tbr): New static function.
4377 (XFXFXM_MASK, XFXM): Define.
4378 (XSPRBAT_MASK, XSPRG_MASK): Define.
4379 (powerpc_opcodes): Add instructions to access special registers by
4380 name. Add mtcr and mftbu.
4382 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4384 * mips-opc.c (P3): Define.
4385 (mips_opcodes): Add mad and madu.
4387 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4389 * configure.in: Add W65 support.
4390 * disassemble.c: Likewise.
4391 * w65-opc.h, w65-dis.c: New files.
4393 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4395 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4398 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4400 * mips-opc.c: Add dli as a synonym for li.
4402 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4404 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4405 print something for reserved opcode values, even if it won't
4408 * mips-dis.c (_print_insn_mips): When initializing, shift right
4409 and mask, to avoid sign extension problems on the Alpha.
4411 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4414 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4416 * sh-opc.h (mov.l gbr): Get direction right.
4417 * sh-dis.c (print_insn_shx): New function.
4418 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4419 print opcodes with right byte order.
4421 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4423 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4424 to avoid conflicts with getopt.
4426 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4428 * hppa-dis.c (print_insn_hppa): Read the instruction using
4429 bfd_getb32, so that it works on a little endian or 64 bit host.
4430 Remove unused local variable op.
4432 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4434 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4435 addu does not work correctly if -mips3.
4437 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4439 * a29k-dis.c (print_special): Add special register names defined
4440 on 29030, 29040 and 29050.
4441 (print_insn): Handle new operand type 'I'.
4443 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4445 * Makefile.in (INSTALL): Use top level install.sh script.
4447 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4449 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4450 that it works on a little endian host.
4452 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4454 * configure.in: Use ${config_shell} when running config.bfd.
4456 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4458 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4460 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4462 * a29k-dis.c (print_insn): Print the opcode.
4464 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4466 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4468 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4470 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4472 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4474 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4475 which store a value into memory.
4477 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4479 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4480 * arm-dis.c, arm-opc.h: New files.
4482 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4484 * Makefile.in (ns32k-dis.o): Add dependency.
4485 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4486 string, not as array of chars.
4488 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4490 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4492 * sparc-opc.c: Added sparclite extended FP operations, and
4493 versions of v9 impdep* instructions permitting specification of
4496 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4498 * i960-dis.c (reg_names): Now const.
4499 (struct sparse_tabent): New type, copied from array type in mem
4501 (ctrl): Local static array ctrl_tab now const.
4502 (cobr): Local static array cobr_tab now const.
4503 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4504 static variable mem_tab no longer explicitly initialized. Changed
4505 mem_init to const array of struct sparse_tabent.
4506 (reg): Local static variable reg_tab no longer explicitly
4507 initialized. Changed reg_init to const array of struct
4509 (ea): Local static array scale_tab now const.
4511 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4514 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4516 * configure.bat: the disassember needs to be enabled for
4517 "objdump -d" to work in djgpp.
4519 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4521 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4522 (invalid_float): Enabled general version, doesn't require running
4523 on ns32k host. Changed to take char* argument, and test for
4524 explicitly specified sizes, instead of using sizeof() on host CPU
4526 (INVALID_FLOAT): Cast first argument.
4527 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4528 list_P032, list_M032): Now const.
4529 (optlist, list_search): Made appropriate arguments now point to
4531 (print_insn_arg): Changed static array of one-character-string
4532 pointers into a static const array of characters; fixed sprintf
4533 statement accordingly.
4535 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4537 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4538 from distribution. A ns32k-dis.c from a previous distribution has
4539 been brought up to date and supports the new interface.
4541 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4543 * configure.in: add bfd_ns32k_arch target support.
4545 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4546 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4548 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4550 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4553 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4555 * h8300-dis.c, mips-dis.c: Don't use true and false.
4557 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4559 * configure.in: Change --with-targets to --enable-targets.
4561 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4563 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4564 opcodes to the first instruction with that opcode, to speed
4565 disassembly of large files. From ralphc@pyramid.com (Ralph
4568 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4570 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4572 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4574 * configure.bat: update to latest makefile.in
4576 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4578 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4579 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4580 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4581 slot insn is in a delay slot.
4582 * z8k-opc.h: (resflg): Fix patterns.
4583 * h8500-opc.h Fix CR insn patterns.
4585 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4587 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4588 "cmpl" before POWER versions, so that gas -many uses them.
4590 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4592 * disassemble.c: New file.
4593 * Makefile.in (OFILES): Add disassemble.o.
4594 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4595 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4596 binutils/configure.in.
4598 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4599 opcode being examined.
4601 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4603 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4604 (insert_ral, insert_ram, insert_ras): New functions.
4605 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4606 RAS for store with update.
4608 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4610 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4611 (edelsohn@npac.syr.edu).
4613 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4615 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4618 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4620 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4622 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4624 * ppc-opc.c (powerpc_operands): The signedp field has been
4625 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4626 instead. Add new operand SISIGNOPT.
4627 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4628 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4629 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4632 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4634 * i386-dis.c (struct private): Renamed to dis_private. `private'
4635 is a reserved word for dynix cc.
4637 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4639 * configure.in: Change error message to refer to bfd/config.bfd
4640 rather than bfd/configure.in.
4642 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4644 * ppc-opc.c: Define POWER2 as short alias flag.
4645 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4648 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4650 * i960-dis.c (print_insn_i960): Don't read a second word for
4651 opcodes 0, 1, 2 and 3.
4653 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4655 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4657 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4659 * m68881-ext.c: Removed; no longer used.
4660 * Makefile.in: Changed accordingly.
4662 * m68k-dis.c (ext_format_68881): Don't declare.
4663 (print_insn_m68k): If an instruction uses place 'i', it uses at
4664 least four fixed bytes.
4665 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4666 extended float, convert to double using floatformat_to_double, not
4667 ieee_extended_to_double, and fetch the data before converting it.
4669 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4671 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4672 davidj@ICSI.Berkeley.EDU (David Johnson).
4674 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4676 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4677 PowerPC uses bdnz[l][a].
4679 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4681 * dis-buf.c, i386-dis.c: Include sysdep.h.
4683 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4685 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4687 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4688 by Motorola PowerPC 601 with PPC_OPCODE_601.
4689 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4690 Disassemble Motorola PowerPC 601 instructions as well as normal
4691 PowerPC instructions.
4693 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4695 * i960-dis.c (reg, mem): Just use a static array instead of
4698 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4700 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4701 condition name index if this is for a negated condition.
4703 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4704 Floating point format for 'H' operand is backwards from normal
4705 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4706 operands (fmpyadd and fmpysub), handle bizarre register
4707 translation correctly for single precision format.
4709 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4710 or 'I' operands if the next format specifier is 'M' (fcmp
4711 condition completer).
4713 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4715 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4716 single number giving a bitmask for the MB and ME fields of an M
4717 form instruction. Change NB to accept 32, and turn it into 0;
4718 also turn 0 into 32 when disassembling. Seperated SH from NB.
4719 (insert_mbe, extract_mbe): New functions.
4720 (insert_nb, extract_nb): New functions.
4721 (SC_MASK): Mask out SA and LK bits.
4722 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4723 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4724 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4725 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4726 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4727 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4728 (powerpc_macros): Define table of macro definitions.
4729 (powerpc_num_macros): Define.
4731 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4732 if PPC_OPERAND_NEXT is set.
4734 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4736 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4737 char. Retrieve contents using bfd_getl32 instead of shifting.
4739 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4741 * ppc-opc.c: New file. Opcode table for PowerPC, including
4742 opcodes for POWER (RS/6000).
4743 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4744 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4745 (CFILES): Add ppc-dis.c.
4746 (ppc-dis.o, ppc-opc.o): New targets.
4747 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4749 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4751 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4752 No space before 'u', 'f', or 'N'.
4754 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4756 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4757 farther than we should.
4759 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4761 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4763 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4765 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4767 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4768 needs it, to prevent reading past the end of a section.
4770 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4772 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4773 Removed t,A case for la; always use t,A(b) case.
4775 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4777 From Ted Lemen <mellon@pepper.ncd.com>
4778 * mips-dis.c (print_insn_arg): Handle 'k'.
4779 * mips-opc.c: Make cache use k, not t.
4781 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4783 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4784 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4785 FLOAT_FORMAT_CODE to put out floating point register names.
4787 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4789 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4791 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4793 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4795 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4797 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4798 larger than 32. Moved dsxx32 variants first for disassembler.
4800 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4802 * z8kgen.c, z8k-opc.h: Add full lda information.
4804 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4806 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4807 movb instructions. Any necessary space will be emitted by
4808 the code to handle nullification completers.
4810 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4812 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4814 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4816 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4817 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4819 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4821 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4823 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4825 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4826 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4828 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4830 * m88k-dis.c (m88kdis): comment change. Remove space after
4832 (printop): handle new arg types DEC and XREG for m88110.
4834 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4836 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4837 type for absolute branch addresses. Delete special
4838 "ble" and "be" code in 'W' operand code.
4840 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4842 * mips-opc.c: Set hazard information correctly for branch
4843 likely instructions.
4845 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4847 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4848 info->fprintf_func for printing and info->print_address_func for
4851 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4853 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4855 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4857 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4858 Corrected second case of "b" for disassembler.
4860 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4862 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4863 to BFD swapping routines to correspond to BFD name changes.
4865 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4867 * mips-opc.c: Change div machine instruction to be z,s,t rather
4868 than s,t. Change div macro to be d,v,t rather than d,s,t.
4869 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4870 rem and remu which generates only the corresponding div
4871 instruction. This is for compatibility with the MIPS assembler,
4872 which only generates the simple machine instruction when an
4873 explicit destination of $0 is used.
4874 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4876 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4878 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4879 WR_31 hazard for bal, bgezal, bltzal.
4881 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4883 * hppa-dis.c (print_insn_hppa): Use print function
4884 from within the disassemble_info, not fprintf_filtered.
4886 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4888 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4889 Law, law@cs.utah.edu.)
4891 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4893 * mips-opc.c ("absu"): Removed.
4896 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4898 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4899 Changed hazard information to distinguish between memory load
4900 delays and coprocessor load delays.
4902 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4904 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4906 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4908 * configure.in: Don't pass cpu to config.bfd.
4910 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4912 * m88k-dis.c (m88kdis): Make class unsigned.
4914 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4916 * alpha-dis.c (print_insn_alpha): One branch format case was
4917 missing the instruction name.
4919 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4921 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4922 Add the arch-specific auxiliary files.
4923 (OFILES): Remove the arch-specific auxiliary files
4924 and use BFD_MACHINES instead of DIS_LIBS.
4925 * configure.in: Set BFD_MACHINES based on --with-targets option.
4927 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4929 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4932 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4934 * sparc-opc.c: Change CONST to const to deal with gcc
4935 -Dconst=__const -traditional.
4937 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4939 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4940 coprocessor instructions out of #if 0, and made them use new
4943 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4945 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4947 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4949 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4950 instruction, for use by the disassembler.
4952 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4953 hand-coded sign extensions that depended on 32-bit host ints.
4954 FIXME, we still depend on big-endian host bitfield ordering.
4955 (sparc_print_insn): Set the insn_info_valid field, and the
4956 other fields that describe the instruction being printed.
4958 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4960 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4961 `jmp' instead of just one of them.
4963 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4965 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4966 (fput_fp_reg_r): Renamed from fput_reg_r.
4967 (fput_fp_reg): New function.
4968 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4970 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4972 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4974 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4976 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4978 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4979 don't output a space.
4981 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4983 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4985 * mips-opc.c: New file, containing opcode table from
4986 ../include/opcode/mips.h.
4987 * Makefile.in: Add it.
4989 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4991 * m88k-dis.c: New file, moved in from gdb and changed to use the
4992 new dis-asm.h disassembler interface.
4993 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4994 (m88k-dis.o): New target.
4996 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4998 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4999 argument string const char * to correspond to opcode/mips.h.
5001 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5003 * mips-dis.c: Updated to account for name changes in new version
5005 * Makefile.in: Added header file dependencies.
5007 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5009 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5011 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5013 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5014 extend, rather than shifts.
5016 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5018 * Makefile.in: Undo 15 June change.
5020 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5022 * m68k-dis.c (print_insn_arg): Change return value to byte count
5024 * m68k-dis.c: Re-write to detect invalid operands before
5025 printing anything, so we can handle this the same way we
5026 handle invalid opcodes.
5028 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5030 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5032 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5034 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5037 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5039 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5041 * configure.in: Do make sysdep.h link.
5042 * Makefile.in: Search ../include. Don't search ../bfd.
5044 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5046 Changes from Jeff Law, law@cs.utah.edu:
5047 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5048 Do not print a space before the completers specified by
5051 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5053 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5054 defined, since gdb has been fixed.
5056 Changes from Jeff Law, law@cs.utah.edu:
5057 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5058 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5059 be a *disassemble_info, not a *FILE.
5060 * hppa-dis.c: Support 'd', '!', and 'a'.
5061 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5062 * hppa-dis.c: Delete cases which are no longer needed.
5064 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5066 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5068 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5070 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5073 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5075 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5076 * configure.in: No longer need to configure to get sysdep.h.
5078 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5080 * Patches from Jeffrey Law <law@cs.utah.edu>.
5081 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5082 templates for 1.1 FP computational instructions.
5084 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5086 * h8500-dis.c (print_insn_h8500): Address argument is type
5088 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5091 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5092 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5094 * sparc-dis.c (compare_opcodes): Move static declaration to
5097 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5099 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5100 instruction, remove unimp hack from 'l' argument.
5102 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5104 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5107 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5109 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5110 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5113 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5115 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5116 arrays of string pointers to 2-d arrays of chars, to save
5119 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5121 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5122 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5124 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5126 * hppa-dis.c: New file from Utah, adapted to new disassembler
5128 * Makefile.in: Include it.
5130 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5132 * sh-dis.c, sh-opc.h: New files.
5134 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5136 * alpha-dis.c, alpha-opc.h: New files.
5138 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5140 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5143 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5145 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5147 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5149 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5152 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5154 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5155 and double percent signs a few places.
5157 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5159 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5160 Use info->print_address_func not print_address.
5162 * dis-buf.c (generic_print_address): New function.
5164 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5166 * Makefile.in: Add sparc-dis.c.
5167 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5169 Add `add' instruction to the set that get checked
5170 for a preceding `sethi' in order to print an absolute address.
5171 * (print_insn): Disassembly prefers real instructions.
5172 (is_delayed_branch): Speed up.
5173 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5174 Still missing some float ops, and needs testing.
5175 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5176 F_ALIAS. Use printf, not fprintf, when not passing a file
5178 (compare_opcodes): Check that identical instructions have
5179 identical opcodes, complain otherwise.
5182 * Include reg_names.
5184 Use dis-asm.h/read_memory_func interface.
5186 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5188 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5189 deliberately return non-zero to setjmp from longjmp. Otherwise
5190 this code fails to compile.
5192 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5194 * m68k-dis.c: Fix prototype for fetch_arg().
5196 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5198 * dis-buf.c: New file, for new read_memory_func interface.
5199 Makefile.in (OFILES): Include it.
5200 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5201 Use new read_memory_func interface.
5203 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5205 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5206 * h8500-opc.h: Fix couple of opcodes.
5208 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5210 * Makefile.in: add dvi & installcheck targets
5212 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5214 * Makefile.in: Update for h8500-dis.c.
5216 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5218 * h8500-dis.c, h8500-opc.h: New files
5220 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5222 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5223 ../include/dis-asm.h.
5224 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5225 and ../gdb/m68k-pinsn.c).
5226 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5227 and ../gdb/i386-pinsn.c).
5228 * m68881-ext.c: New file. Moved definition of
5229 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5230 * Makefile.in: Adjust for new files.
5231 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5232 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5233 can be dis-assembled.
5235 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5237 * mips-dis.c (print_insn_arg): Now returns void.
5239 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5241 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5242 files that use the macros.
5244 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5246 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5247 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5248 (CFILES): Added mips-dis.c.
5250 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5252 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5253 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5255 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5257 * Makefile.in: Improve *clean rules.
5258 * configure.in: Allow a default host.
5260 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5262 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5263 files include other sysdep files
5265 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5267 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5269 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5271 * configure.in: For host support, use ../bfd/configure.host
5272 so it stays in sync with the ../bfd/hosts database.
5274 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5276 * configure.in: use cpu-vendor-os triple instead of nested cases
5278 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5280 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5281 *always* the wrong one.
5283 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5285 * z8kgen.c: added copyright info
5287 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5289 * z8k-dis.c (unparse_instr): prettier tabs
5290 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5292 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5294 * configure.in: Add ncr* configuration.
5295 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5296 picayune ANSI compilers happy.
5298 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5300 * configure.in (i386): Make i386 and i486 synonymous for now.
5301 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5303 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5305 * Makefile.in (install): Fix typo.
5307 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5309 * Makefile.in (make): Remove obsolete crud.
5310 (sparc-opc.o): Avoid Sun Make VPATH bug.
5312 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5314 * Makefile.in: since there are no SUBDIRS, remove rule and
5315 references of subdir_do.
5317 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5319 * Makefile.in (install): Get the library name right here too.
5320 Don't install bfd.h, since it's unrelated to this library. No
5321 subdirs to recurse into, either.
5322 (CFILES): The source file has a .c suffix, not .o.
5324 * sparc-opc.c: New file, moved from BFD.
5325 * Makefile.in (OFILES): Build it.
5327 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5329 * z8k-dis.c: fixed forward refferences of some declarations.
5331 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5333 * Makefile.in: get the name of the library right
5335 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5337 * z8k-dis.c: knows how to disassemble z8k stuff
5338 * z8k-opc.h: new file full of z8000 opcodes
5342 version-control: never