1 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
5 2001-05-23 Alan Modra <amodra@one.net.au>
7 * arc-opc.c: Whitespace changes.
9 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
11 * cris-opc.c (cris_spec_regs): Add missing initializer field for
14 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
16 * cgen-dis.in (extract_normal): Complete support for min<base case.
18 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
20 * mips-dis.c (INSNLEN): Rename MAXLEN.
21 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
22 (print_insn_arg): Remove $ prefix of register names.
23 (set_mips_isa_type): Remove.
24 (mips_isa_type): New function.
25 (get_mips_isa): New Function.
26 (print_insn_mips): Rename _print_insn_mips.
27 (_print_insn_mips): New function, contains code which was
28 duplicated in print_insn_big_mips and print_insn_little_mips.
29 (print_insn_big_mips): Moved code to _print_insn_mips.
30 (print_insn_little_mips): Likewise.
31 (print_mips16_insn_arg): Remove $ prefix of register names.
32 Print error message before abort.
34 2001-05-14 J.T. Conklin <jtc@redback.com>
36 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
37 simplified mnemonics used for setting PPC750-specific special
40 2001-05-12 H.J. Lu <hjl@gnu.org>
42 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
45 2001-05-12 Peter Targett <peter.targett@arccores.com>
47 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
48 register to r/w. Formatting fixes throughout file.
50 2001-05-12 Alan Modra <amodra@one.net.au>
52 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
54 (twobyte_has_modrm): Update table.
55 (need_modrm): Give it file scope.
56 (MODRM_CHECK): Define.
57 (dofloat): Use MODRM_CHECK.
62 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
64 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
65 even at end of a section.
66 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
67 by ignoring precariously-unpacked insn_value in favor of raw buffer.
69 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
71 * disassemble.c (disassembler_usage): Remove unused attribute.
73 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
75 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
77 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
79 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
80 assume incoming buffer already has the base insn loaded. Handle
81 smaller-than-base instructions for variable-length case.
83 2001-05-04 Alan Modra <amodra@one.net.au>
85 * i386-dis.c (Ev, Ed): Remove duplicate define.
88 (OP_XS): New function.
89 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
91 (dis386_twobyte_intel): Likewise.
92 (prefix_user_table): Use MS for maskmovq operand.
94 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
96 * Makefile.am: Add OpenRISC target.
97 * Makefile.in: Regenerated.
99 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
101 * configure.in (bfd_openrisc_arch): Add target.
102 * configure: Regenerated.
104 * openrisc-asm.c: New file.
105 * openrisc-desc.c: Likewise.
106 * openrisc-desc.h: Likewise.
107 * openrisc-dis.c: Likewise.
108 * openrisc-ibld.c: Likewise.
109 * openrisc-opc.c: Likewise.
110 * openrisc-opc.h: Likewise.
112 2001-04-24 Christian Groessler <cpg@aladdin.de>
114 * z8k-dis.c: add names of control registers (ctrl_names);
115 (seg_length): provides instruction length fixup for segmented
116 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
117 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
118 (unparse_intr): handle CLASS_PR, print addresses without '#'
119 * z8k-opc.h: re-created with new z8kgen
120 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
121 entries for ldctl/ldctlb instruction
123 2001-04-06 Andreas Jaeger <aj@suse.de>
125 * i386-dis.c: Add ffreep instruction.
127 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
129 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
131 2001-03-24 Alan Modra <alan@linuxcare.com.au>
133 * i386-dis.c (PREGRP25): Define.
134 (dis386_twobyte_att): Use here in place of "movntq" entry.
135 (dis386_twobyte_intel): Likewise.
136 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
138 (dis386_twobyte_att): Use here.
139 (dis386_twobyte_intel): Likewise.
140 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
141 (prefix_user_table <maskmovdqu>): XM operand, not MX.
142 (prefix_user_table): Cosmetic changes to "bad" entries.
144 2001-03-23 Nick Clifton <nickc@redhat.com>
146 * mips-opc.c: Remove extraneous whitespace.
147 * mips-dis.c: Remove extraneous whitespace.
149 2001-03-22 Ben Elliston <bje@redhat.com>
151 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
152 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
153 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
154 to allay a compiler warning.
156 2001-03-22 Alan Modra <alan@linuxcare.com.au>
158 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
159 (dis386_twobyte_intel): Likewise.
160 (twobyte_has_modrm): Set entry for paddq, psubq.
162 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
164 * cgen-dis.in (print_insn_@arch@): Add support for target machine
165 determination via CGEN_COMPUTE_MACH.
166 * fr30-desc.c: Regenerate.
167 * fr30-dis.c: Regenerate.
168 * fr30-opc.h: Regenerate.
169 * m32r-desc.c: Regenerate.
170 * m32r-dis.c: Regenerate.
171 * m32r-opc.h: Regenerate.
172 * m32r-opinst.c: Regenerate.
174 2001-03-20 H.J. Lu <hjl@gnu.org>
176 * configure.in: Remove the redundent AC_ARG_PROGRAM.
177 * configure: Rebuild.
179 2001-03-19 Jim Wilson <wilson@redhat.com>
181 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
182 notestr if larger than xsect.
183 (in_class): Handle format M5.
184 * ia64-asmtab.c: Regnerate.
186 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
188 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
189 has more than one byte left to read.
191 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
193 * s390-opc.c: Add new opcodes. Smooth out formatting.
194 * s390-opc.txt: Add new opcodes.
196 2001-03-06 Nick Clifton <nickc@redhat.com>
198 * arm-dis.c (print_insn_thumb): Compute destination address
199 of BLX(1) instruction by taking bit 1 from PC and not from bit
202 2001-03-06 Igor Shevlyakov <igor@windriver.com>
204 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
205 so command line switches will work.
207 2001-03-05 Dave Brolley <brolley@redhat.com>
209 * fr30-asm.c: Regenerate.
210 * fr30-desc.c: Regenerate.
211 * fr30-desc.h: Regenerate.
212 * fr30-dis.c: Regenerate.
213 * fr30-ibld.c: Regenerate.
214 * fr30-opc.c: Regenerate.
215 * fr30-opc.h: Regenerate.
216 * m32r-asm.c: Regenerate.
217 * m32r-desc.c: Regenerate.
218 * m32r-desc.h: Regenerate.
219 * m32r-dis.c: Regenerate.
220 * m32r-ibld.c: Regenerate.
221 * m32r-opc.c: Regenerate.
222 * m32r-opc.h: Regenerate.
223 * m32r-opinst.c: Regenerate.
225 2001-02-28 Igor Shevlyakov <igor@windriver.com>
227 * m68k-opc.c: fix cpushl according to Motorola. Enable
228 bunch of instructions for Coldfire 5407 and add all new.
230 2001-02-27 Alan Modra <alan@linuxcare.com.au>
232 * configure.in (BFD_VERSION): Do without grep.
233 * configure: Regenerate.
234 * Makefile.am: Run "make dep-am".
235 * Makefile.in: Regenerate.
237 2001-02-23 David Mosberger <davidm@hpl.hp.com>
239 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
240 * ia64-asmtab.c: Regenerate.
242 2001-02-21 David Mosberger <davidm@hpl.hp.com>
244 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
245 separate variants: one for IMM22 and the other for IMM14.
246 * ia64-asmtab.c: Regenerate.
248 2001-02-21 Greg McGary <greg@mcgary.org>
250 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
252 2001-02-20 H.J. Lu <hjl@gnu.org>
254 * Makefile.am (ia64-ic.tbl): Remove the target.
255 (ia64-raw.tbl): Likewise.
256 (ia64-waw.tbl): Likewise.
257 (ia64-war.tbl): Likewise.
258 (ia64-asmtab.c): Generate it in the source directory.
259 * Makefile.in: Regenerated.
261 2001-02-18 lars brinkhoff <lars@nocrew.org>
263 * Makefile.am: Add PDP-11 target.
264 * configure.in: Likewise.
265 * disassemble.c: Likewise.
266 * pdp11-dis.c: New file.
267 * pdp11-opc.c: New file.
269 2001-02-14 Jim Wilson <wilson@redhat.com>
271 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
272 * ia64-asmtab.c: Regenerate.
274 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
276 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
280 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
282 * mips-dis.c (print_insn_arg): Use top four bits of the address of
283 the following instruction not of the jump itself for the jump
285 (print_mips16_insn_arg): Likewise.
287 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
289 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
291 * Makefile.in: Regenerate.
293 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
295 * Makefile.am: Add linux target for S/390.
296 * Makefile.in: Likewise.
297 * configure.in: Likewise.
298 * disassemble.c: Likewise.
299 * s390-dis.c: New file.
300 * s390-mkopc.c: New file.
301 * s390-opc.c: New file.
302 * s390-opc.txt: New file.
304 2001-02-05 Jim Wilson <wilson@redhat.com>
306 * ia64-asmtab.c: Revert 2000-12-16 change.
308 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
310 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
311 * m32r-desc.h: Regenerate.
313 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
315 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
316 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
318 2001-01-14 Alan Modra <alan@linuxcare.com.au>
320 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
322 2001-01-13 Nick Clifton <nickc@redhat.com>
324 * disassemble.c: Remove spurious white space.
326 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
328 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
331 2001-01-11 Peter Targett <peter.targett@arccores.com>
333 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
334 * Makefile.am (C_FILES): Add arc-ext.c.
335 (ALL_MACHINES) Add arc-ext.lo.
336 (INCLUDES) Add opcode directory to list.
337 New dependency entry for arc-ext.lo.
338 * disassemble.c (disassembler): Correct call to
339 arc_get_disassembler.
340 * arc-opc.c: New update for ARC, including full base
341 instructions for ARC variants.
342 * arc-dis.h, arc-dis.c: New update for ARC, including
343 extensibility functionality.
344 * arc-ext.h, arc-ext.c: New files for handling extensibility.
346 2001-01-10 Jan Hubicka <jh@suse.cz>
348 * i386-dis.c (PREGRP15 - PREGRP24): New.
349 (dis386_twobyt): Add SSE2 instructions.
350 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
351 (twobyte_uses_f3_prefix): ... this one.
352 (grps): Add SSE instructions.
353 (prefix_user_table): Add two new slots; add SSE2 instructions.
354 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
355 Handle the REPNZ and Data16 prefixes as well; do proper lookup
356 to prefix_user_table.
357 (OP_E): Accept mfence and lfence as well.
358 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
359 (OP_XMM): Support REX extensions.
363 2001-01-09 Nick Clifton <nickc@redhat.com>
365 * arm-dis.c (print_insn): Set pc to zero for instructions with
366 a reloc associated with them.
368 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
370 * cgen-asm.in (parse_insn_normal): Changed syn to be
371 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
372 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
373 to '\0' to use 0 instead.
374 * cgen-dis.in (print_insn_normal): Ditto.
375 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
377 2001-01-05 Jan Hubicka <jh@suse.cz>
379 * i386-dis.c: Add x86_64 support.
380 (rex): New static variable.
381 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
382 (USED_REX): New macro.
383 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
384 (OP_I64, OP_OFF64, OP_IMREG): New functions.
385 (OP_REG, OP_OFF): Declare.
386 (get64, get32, get32s): New functions.
387 (r??_reg): New constants.
388 (dis386_att): Change templates of instruction implicitly promoted
389 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
391 (dis386_intel): Likewise.
392 (dixx86_64_att): New table based on dis386_att.
393 (dixx86_64_intel): New table based on dis386_intel.
394 (names64, names8rex): New global variable.
395 (names32, names16): Add extended registers.
396 (prefix_user_t): Recognize rex prefixes.
397 (prefix_name): Print REX prefixes nicely.
398 (op_riprel): New global variable.
399 (start_pc): Set type to bfd_vma.
400 (print_insn_i386): Detect the 64bit mode and use proper table;
401 move ckprefix after initializing the buffer; output unused rex prefixes;
402 output information about target of RIP relative addresses.
403 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
404 (print_operand_value): New function.
405 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
406 REX prefix and new modes.
407 (get64, get32s): New.
408 (get32): Return bfd_signed_vma type.
409 (set_op): Initialize the op_riprel.
410 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
412 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
414 cgen-dis.in (read_insn): Use bfd_get_bits()
416 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
418 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
419 (hash_insn_list): Likewise
420 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
421 (extract_1): Use bfd_get_bits().
422 (extract_normal): Apply sign extension to both extraction
424 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
425 (cgen_put_insn_value): Use bfd_put_bits()
427 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
429 * cgen-asm.in (parse_insn_normal): Print better error message for
430 instructions with missing operands.
432 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
434 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
436 2000-12-16 Nick Clifton <nickc@redhat.com>
438 * Makefile.in: Regenerate.
439 * aclocal.m4: Regenerate.
440 * config.in: Regenerate.
441 * configure.in: Add spacing.
442 * configure: Regenerate.
443 * ia64-asmtab.c: Regenerate.
444 * po/opcodes.pot: Regenerate.
446 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
448 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
449 error messages over later parse-time ones.
451 2000-12-12 Jim Wilson <wilson@redhat.com>
453 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
455 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
456 (print_dependency_table): Print NULL if semantics field not set.
457 (insert_opcode_dependencies): Mark cmp parameter as unused.
458 (print_main_table): Use fprintf_vma to print long long fields.
459 (main): Mark argv paramter as unused. Convert to old style definition.
460 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
461 * ia64-asmtab.c: Regnerate.
463 2000-12-09 Nick Clifton <nickc@redhat.com>
465 * m32r-dis.c (print_insn): Prevent re-read of instruction from
468 * fr30-dis.c: Regenerate.
470 2000-12-08 Peter Targett <peter.targett@arccores.com>
472 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
473 * Makefile.am (C_FILES): Add arc-ext.c.
474 (ALL_MACHINES) Add arc-ext.lo.
475 (INCLUDES) Add opcode directory to list.
476 New dependency entry for arc-ext.lo.
477 * disassemble.c (disassembler): Correct call to
478 arc_get_disassembler.
479 * arc-opc.c: New update for ARC, including full base
480 instructions for ARC variants.
481 * arc-dis.h, arc-dis.c: New update for ARC, including
482 extensibility functionality.
483 * arc-ext.h, arc-ext.c: New files for handling extensibility.
485 2000-12-03 Chris Demetriou cgd@sibyte.com
487 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
488 MOD_HILO, and MOD_LO macros.
490 * mips-opc.c (M1, M2): Delete.
491 (mips_builtin_opcodes): Remove all uses of M1.
493 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
494 instructions take "G" format second operands and use the
496 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
498 Delete "sel" code operands from mfc1 and mtc1.
499 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
502 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
503 Chris Demetriou cgd@sibyte.com
505 * mips-opc.c (mips_builtin_opcodes): Finish additions
506 for MIPS32 support, and clean up existing entries for
507 aesthetics, consistency with the MIPS32 ISA, and
508 with consistency the rest of the table.
510 2000-12-01 Nick Clifton <nickc@redhat.com>
512 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
515 2000-12-01 Chris Demetriou <cgd@sibyte.com>
517 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
518 specifiers. Update 'B' for new constant names, and remove
520 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
521 near the top of the array, so they are disassembled properly.
522 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
523 code for MIPS32. Update "clo" and "clz" to use 'U' operand
524 specifier. Add 'H' format specifier variants for "mfc1,"
525 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
526 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
527 "wait" variant which uses 'J' operand specifier.
529 * mips-dis.c (set_mips_isa_type): Update to use
530 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
531 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
532 * mips-opc.c (I32): New constant for instructions added in
535 (mips_builtin_opcodes) Replace all uses of P4 with I32.
537 * mips-dis.c (set_mips_isa_type): Add cases for
538 bfd_mach_mips5 and bfd_mach_mips64.
539 * mips-opc.c (I64): New definitions.
541 * mips-dis.c (set_mips_isa_type): Add case for
544 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
546 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
547 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
548 Initialize variable dc to NULL.
549 (print_insn_shx): Remove unused label d_reg_n.
551 2000-11-24 Nick Clifton <nickc@redhat.com>
553 * arm-opc.h: Add new opcode formatting parameter 'B'.
554 (arm_opcodes): Add XScale, v5, and v5te instructions.
555 (thumb_opcodes): Add v5t instructions.
557 * arm-dis.c (print_insn_arm): Handle new 'B' format
559 (print_insn_thumb): Decode BLX(1) instruction.
561 2000-11-21 Chris Demetriou <cgd@sibyte.com>
563 * mips-opc.c: Fix file header comment.
565 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
567 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
568 print_insn_cris_with_register_prefix.
570 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
572 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
574 2000-11-07 Matthew Green <mrg@redhat.com>
576 * cgen-dis.in (print_insn): All insns which can fit into insn_value
577 must be loaded there in their entirety.
579 2000-10-20 Jakub Jelinek <jakub@redhat.com>
581 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
582 (compute_arch_mask): Add v8plusb and v9b machines.
583 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
584 * sparc-opc.c: Support for Cheetah instruction set.
585 (prefetch_table): Add #invalidate.
587 2000-10-16 Nick Clifton <nickc@redhat.com>
589 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
591 2000-10-06 Dave Brolley <brolley@redhat.com>
593 * fr30-desc.h: Regenerate.
594 * m32r-desc.h: Regenerate.
595 * m32r-ibld.c: Regenerate.
597 2000-10-05 Jim Wilson <wilson@redhat.com>
599 * ia64-ic.tbl: Update from Intel.
600 * ia64-asmtab.c: Regenerate.
602 2000-10-04 Kazu Hirata <kazu@hxi.com>
604 * ia64-gen.c: Convert C++-style comments to C-style comments.
605 * tic54x-dis.c: Likewise.
607 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
609 Changes to add dollar prefix to registers for files where user symbols
610 don't have a leading underscore. Fix formatting.
611 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
612 (format_reg): Add parameter with_reg_prefix. All callers changed.
613 (print_with_operands): Ditto.
614 (print_insn_cris_generic): Renamed from print_insn_cris, add
615 parameter with_reg_prefix.
616 (print_insn_cris_with_register_prefix,
617 print_insn_cris_without_register_prefix, cris_get_disassembler):
619 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
621 2000-09-22 Jim Wilson <wilson@redhat.com>
623 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
624 gt, ge, ngt, and nge.
625 * ia64-asmtab.c: Regenerate.
627 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
628 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
629 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
630 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
631 * ia64-asmtab.c: Regnerate.
633 2000-09-13 Anders Norlander <anorland@acc.umu.se>
635 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
636 Add mfc0 and mtc0 with sub-selection values.
637 Add clo and clz opcodes.
638 Add msub and msubu instructions for MIPS32.
639 Add madd/maddu aliases for mad/madu for MIPS32.
640 Support wait, deret, eret, movn, pref for MIPS32.
641 Support tlbp, tlbr, tlbwi, tlbwr.
644 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
645 (print_insn_arg): Handle 'H' args.
646 (set_mips_isa_type): Recognize 4K.
647 Use CPU_* defines instead of hardcoded numbers.
649 2000-09-11 Catherine Moore <clm@redhat.com>
651 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
652 (d30v_format_tab): Use Rb2 for modinc and moddec.
654 2000-09-07 Catherine Moore <clm@redhat.com>
656 * d30v-opc.c (d30v_format_tab): Use format Ra for
659 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
661 * configure: Rebuilt with new libtool.m4.
663 2000-09-05 Nick Clifton <nickc@redhat.com>
665 * configure: Regenerate.
666 * po/opcodes.pot: Regenerate.
668 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
670 * acinclude.m4: Include libtool and gettext macros from the
672 * aclocal.m4, configure: Rebuilt.
674 2000-08-30 Kazu Hirata <kazu@hxi.com>
676 * tic80-dis.c: Fix formatting.
678 2000-08-29 Kazu Hirata <kazu@hxi.com>
680 * w65-dis.c: Fix formatting.
682 2000-08-28 Mark Hatle <mhatle@mvista.com>
684 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
685 (powerpc_opcodes): Add table entries for PPC 405 instructions.
686 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
687 instructions. Added extended mnemonic mftbl as defined in the
688 405GP manual for all PPCs.
690 2000-08-28 Jim Wilson <wilson@redhat.com>
692 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
693 call. Change last goto to use failed instead of done.
695 2000-08-28 Dave Brolley <brolley@redhat.com>
697 * cgen-ibld.in (cgen_put_insn_int_value): New function.
698 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
699 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
700 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
701 * cgen-dis.in (read_insn): New static function.
702 (print_insn): Use read_insn to read the insn into the buffer and set
704 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
706 * fr30-asm.c: Regenerated.
707 * fr30-desc.c: Regenerated.
708 * fr30-desc.h: Regenerated.
709 * fr30-dis.c: Regenerated.
710 * fr30-ibld.c: Regenerated.
711 * fr30-opc.c: Regenerated.
712 * fr30-opc.h: Regenerated.
713 * m32r-asm.c: Regenerated.
714 * m32r-desc.c: Regenerated.
715 * m32r-desc.h: Regenerated.
716 * m32r-dis.c: Regenerated.
717 * m32r-ibld.c: Regenerated.
718 * m32r-opc.c: Regenerated.
720 2000-08-28 Kazu Hirata <kazu@hxi.com>
722 * tic30-dis.c: Fix formatting.
724 2000-08-27 Kazu Hirata <kazu@hxi.com>
726 * sh-dis.c: Fix formatting.
728 2000-08-24 David Edelsohn <dje@watson.ibm.com>
730 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
732 2000-08-24 Kazu Hirata <kazu@hxi.com>
734 * z8k-dis.c: Fix formatting.
736 2000-08-16 Jim Wilson <wilson@redhat.com>
738 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
739 break, mov-immediate, nop.
740 * ia64-opc-f.c: Delete fpsub instructions.
741 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
742 address operand. Rewrite using macros to avoid long lines.
743 * ia64-opc.h (POSTINC): Define.
744 * ia64-asmtab.c: Regenerate.
746 2000-08-15 Jim Wilson <wilson@redhat.com>
748 * ia64-ic.tbl: Add missing entries.
750 2000-08-08 Jason Eckhardt <jle@redhat.com>
752 * i860-dis.c (print_br_address): Change third argument from int
755 2000-08-07 Richard Henderson <rth@redhat.com>
757 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
758 for MLI templates. Handle IA64_OPND_TGT64.
760 2000-08-04 Ben Elliston <bje@redhat.com>
762 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
765 2000-08-02 Jim Wilson <wilson@redhat.com>
767 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
769 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
771 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
772 Change return type from void to int. Check the combination
773 of operands, return 1 if valid. Fix to avoid BUF overflow.
774 Report undefined combinations of operands in COMMENT.
775 Report internal errors to stderr. Output the adiw/sbiw
776 constant operand in both decimal and hex.
777 (print_insn_avr): Disassemble ldd/std with displacement of 0
778 as ld/st. Check avr_operand () return value, handle invalid
779 combinations of operands like unknown opcodes.
781 2000-07-28 Ben Elliston <bje@redhat.com>
783 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
784 (run-cgen, stamp-m32r, stamp-fr30): New targets.
785 * Makefile.in: Regenerate.
786 * configure.in: Add --enable-cgen-maint option.
787 * configure: Regenerate.
789 2000-07-26 Dave Brolley <brolley@redhat.com>
791 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
792 (cgen_hw_lookup_by_num): Ditto.
793 (cgen_operand_lookup_by_name): Ditto.
794 (print_address): Ditto.
795 (print_keyword): Ditto.
796 * cgen-dis.c (hash_insn_array): Mark unused parameters with
798 * cgen-asm.c (hash_insn_array): Mark unused parameters with
800 (cgen_parse_keyword): Ditto.
802 2000-07-22 Jason Eckhardt <jle@redhat.com>
804 * i860-dis.c: New file.
805 (print_insn_i860): New function.
806 (print_br_address): New function.
807 (sign_extend): New function.
808 (BITWISE_OP): New macro.
809 (I860_REG_PREFIX): New macro.
810 (grnames, frnames, crnames): New structures.
812 * disassemble.c (ARCH_i860): Define.
813 (disassembler): Add check for bfd_arch_i860 to set disassemble
814 function to print_insn_i860.
816 * Makefile.in (CFILES): Added i860-dis.c.
817 (ALL_MACHINES): Added i860-dis.lo.
818 (i860-dis.lo): New dependences.
820 * configure.in: New bits for bfd_i860_arch.
822 * configure: Regenerated.
824 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
826 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
827 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
828 (cris-dis.lo, cris-opc.lo): New rules.
829 * Makefile.in: Rebuild.
830 * configure.in (bfd_cris_arch): New target.
831 * configure: Rebuild.
832 * disassemble.c (ARCH_cris): Define.
833 (disassembler): Support ARCH_cris.
834 * cris-dis.c, cris-opc.c: New files.
835 * po/POTFILES.in, po/opcodes.pot: Regenerate.
837 2000-07-11 Jakub Jelinek <jakub@redhat.com>
839 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
840 Reported by Bill Clarke <llib@computer.org>.
842 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
844 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
845 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
847 2000-07-09 Alan Modra <alan@linuxcare.com.au>
849 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
850 fput_const, extract_3, extract_5_load, extract_5_store,
851 extract_5r_store, extract_5R_store, extract_10U_store,
852 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
853 extract_12, extract_17, extract_22): Prototype.
854 (print_insn_hppa): Rename inner block opcode -> opc to avoid
855 shadowing outer block.
858 2000-07-05 DJ Delorie <dj@redhat.com>
862 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
864 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
866 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
868 * avr-dis.c (avr_operand): Change _ () to _() around all strings
869 marked for translation (exception from the usual coding style).
870 (print_insn_avr): Initialize insn2 to avoid warnings.
872 2000-07-03 Kazu Hirata <kazu@hxi.com>
874 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
875 * h8500-dis.c: Fix formatting.
877 2000-07-01 Alan Modra <alan@linuxcare.com.au>
879 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
880 (CLEANFILES): Add DEPA.
881 * Makefile.in: Regenerate.
883 2000-06-26 Scott Bambrough <scottb@netwinder.org>
885 * arm-dis.c (regnames): Add an additional register set to match
886 the set used by GCC. Make it the default.
888 2000-06-22 Alan Modra <alan@linuxcare.com.au>
890 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
892 * Makefile.in: Regenerate.
894 2000-06-20 H.J. Lu <hjl@gnu.org>
896 * Makefile.am: Rebuild dependency.
897 * Makefile.in: Rebuild.
899 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
901 * Makefile.in, configure: regenerate
902 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
904 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
906 * configure.in: Recognize m68hc12 and m68hc11.
907 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
908 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
909 and opcode generation for m68hc11 and m68hc12.
911 2000-06-16 Nick Duffek <nsd@redhat.com>
913 * disassemble.c (disassembler): Refer to the PowerPC 620 using
914 bfd_mach_ppc_620 instead of 620.
916 2000-06-12 Kazu Hirata <kazu@hxi.com>
918 * h8300-dis.c: Fix formatting.
919 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
922 2000-06-09 Denis Chertykov <denisc@overta.ru>
924 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
926 2000-06-07 Denis Chertykov <denisc@overta.ru>
928 * avr-dis.c: completely rewritten.
930 2000-06-02 Kazu Hirata <kazu@hxi.com>
932 * h8300-dis.c: Follow the GNU coding style.
933 (bfd_h8_disassemble) Fix a typo.
935 2000-06-01 Kazu Hirata <kazu@hxi.com>
937 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
938 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
939 correctly. Fix a typo.
941 2000-05-31 Nick Clifton <nickc@redhat.com>
943 * opintl.h (_(String)): Explain why dgettext is used instead of
946 2000-05-30 Nick Clifton <nickc@redhat.com>
948 * opintl.h (gettext, dgettext, dcgettext, textdomain,
949 bindtextdomain): Replace defines with those from intl/libgettext.h
950 to quieten gcc warnings.
952 2000-05-26 Alan Modra <alan@linuxcare.com.au>
954 * Makefile.am: Update dependencies with "make dep-am"
955 * Makefile.in: Regenerate.
957 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
959 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
960 sign-extending operands.
962 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
964 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
967 2000-05-21 Nick Clifton <nickc@redhat.com>
969 * Makefile.am (LIBIBERTY): Define.
971 2000-05-19 Diego Novillo <dnovillo@redhat.com>
973 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
974 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
975 (reg_names): Rename to std_reg_names. Change it to a char **
977 (std_reg_names): New name for reg_names.
978 (set_mips_isa_type): Set reg_names to point to std_reg_names by
981 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
983 * fr30-desc.h: Partially regenerated to account for changed
984 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
985 * m32r-desc.h: Ditto.
987 2000-05-15 Nick Clifton <nickc@redhat.com>
989 * arm-opc.h: Use upper case for flasg in MSR and MRS
990 instructions. Allow any bit to be set in the field_mask of
993 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
994 field_mask of an MSR instruction.
996 2000-05-11 Thomas de Lellis <tdel@windriver.com>
998 * arm-opc.h: Disassembly of thumb ldsb/ldsh
999 instructions changed to ldrsb/ldrsh.
1001 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
1003 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1004 target addresses for 'jal' and 'j'.
1006 2000-05-10 Geoff Keating <geoffk@redhat.com>
1008 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1009 also available in common mode when powerpc syntax is being used.
1011 2000-05-08 Alan Modra <alan@linuxcare.com.au>
1013 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1014 (dummy_print_address): Ditto.
1016 2000-05-04 Timothy Wall <twall@redhat.com>
1018 * tic54x-opc.c: New.
1019 * tic54x-dis.c: New.
1020 * disassemble.c (disassembler): Add ARCH_tic54x.
1021 * configure.in: Added tic54x target.
1023 * Makefile.am: Add tic54x dependencies.
1024 * Makefile.in: Ditto.
1026 2000-05-03 J.T. Conklin <jtc@redback.com>
1028 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1029 vector unit operands.
1030 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1031 unit instruction formats.
1032 (PPCVEC): New macro, mask for vector instructions.
1033 (powerpc_operands): Add table entries for above operand types.
1034 (powerpc_opcodes): Add table entries for vector instructions.
1036 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1037 (print_insn_little_powerpc): Likewise.
1038 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1040 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1042 * configure.in: Add bfd_powerpc_64_arch.
1043 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1046 2000-04-24 Nick Clifton <nickc@redhat.com>
1048 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1051 2000-04-23 Denis Chertykov <denisc@overta.ru>
1053 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1055 (reg_fmul_r): New. Extract source register from FMUL instruction.
1056 (reg_muls_d): New. Extract destination register from MULS instruction.
1057 (reg_muls_r): New. Extract source register from MULS instruction.
1058 (reg_movw_d): New. Extract destination register from MOVW instruction.
1059 (reg_movw_r): New. Extract source register from MOVW instruction.
1060 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1061 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1063 2000-04-22 Timothy Wall <twall@redhat.com>
1065 * ia64-gen.c (general): Add an ordered table of primary
1066 opcode names, as well as priority fields to disassembly data
1067 structures to enforce a preferred disassembly format based on the
1068 ordering of the opcode tables.
1069 (load_insn_classes): Show a useful message if IC tables are missing.
1070 (load_depfile): Ditto.
1071 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1072 distinguish preferred disassembly.
1073 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1074 format. Fix incorrect flag on fma.s/fma.s.s0.
1075 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1076 the highest priority.
1077 * ia64-opc-b.c: Use more abbreviations.
1078 * ia64-asmtab.c: Regenerate.
1080 2000-04-21 Jason Eckhardt <jle@redhat.com>
1082 * hppa-dis.c (extract_16): New function.
1083 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1084 new operand types l,y,&,fe,fE,fx.
1086 2000-04-21 Richard Henderson <rth@redhat.com>
1087 David Mosberger <davidm@hpl.hp.com>
1088 Timothy Wall <twall@redhat.com>
1089 Bob Manson <manson@charmed.cygnus.com>
1090 Jim Wilson <wilson@redhat.com>
1092 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1093 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1094 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1096 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1097 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1098 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1099 * Makefile.in: Rebuild.
1100 * configure Rebuild.
1101 * configure.in (bfd_ia64_arch): New target.
1102 * disassemble.c (ARCH_ia64): Define.
1103 (disassembler): Support ARCH_ia64.
1104 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1105 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1106 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1107 ia64-war.tbl, ia64-waw.tbl: New files.
1109 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1111 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1112 (disassemble): Use them.
1114 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1116 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1117 * Makefile.am: Update dependencies.
1118 * Makefile.in: Regenerate.
1120 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1122 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1123 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1124 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1125 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1126 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1127 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1128 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1129 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1130 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1131 ansidecl.h as sysdep.h includes it.
1133 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1135 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1136 --enable-build-warnings option.
1137 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1138 * Makefile.in, configure: Re-generate.
1140 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1142 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1143 stc GBR,@-<REG_N> is available for arch_sh1_up.
1144 Group parallel processing insn with identical mnemonics together.
1145 Make three-operand psha / pshl come first.
1147 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1149 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1150 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1151 (sh_arg_type): Add A_PC.
1152 (sh_table): Update entries using immediates. Add repeat.
1153 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1154 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1156 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1158 * po/opcodes.pot: Regenerate.
1160 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1161 (DEP): Quote when passing vars to sub-make. Add warning message
1163 (DEP1): Rewrite for "gcc -MM".
1164 (CLEANFILES): Add DEP2.
1165 Update dependencies.
1166 * Makefile.in: Regenerate.
1168 2000-04-03 Denis Chertykov <denisc@overta.ru>
1170 * avr-dis.c: Syntax cleanup.
1171 (add0fff): Print the pc relative address as a signed number.
1172 (add03f8): Likewise.
1174 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1176 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1177 the parameter ATTRIBUTE_UNUSED.
1178 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1180 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1182 * m10300-opc.c: SP-based offsets are always unsigned.
1184 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1186 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1187 [branch always] instead of "undefined".
1189 2000-03-27 Nick Clifton <nickc@redhat.com>
1191 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1192 short instructions, from end of list of long instructions.
1194 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1196 * Makefile.am (CFILES): Add avr-dis.c.
1197 (ALL_MACHINES): Add avr-dis.lo.
1199 2000-03-27 Alan Modra <alan@linuxcare.com>
1201 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1203 (print_insn_avr): Call function via pointer in K&R compatible way.
1204 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1205 add0fff, add03f8): Convert to old style function declaration and
1207 (avrdis_opcode): Add prototype.
1209 2000-03-27 Denis Chertykov <denisc@overta.ru>
1211 * avr-dis.c: New file. AVR disassembler.
1212 * configure.in (bfd_avr_arch): New architecture support.
1213 * disassemble.c: Likewise.
1214 * configure: Regenerate.
1216 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1218 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1220 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1222 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1223 flag to determine if operand is pc-relative.
1225 (d30v_format_table):
1226 (REL6S3): Renamed from IMM6S3.
1227 Added flag OPERAND_PCREL.
1228 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1229 added flag OPERAND_PCREL.
1230 (IMM12S3U): Replaced with REL12S3.
1231 (SHORT_D2, LONG_D): Delay target is pc-relative.
1232 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1233 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1234 using the REL* operands.
1235 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1236 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1237 LONG_Db, using REL* operands.
1238 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1239 (d30v_opcode_table): Use new *r formats.
1241 2000-02-28 Nick Clifton <nickc@redhat.com>
1243 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1244 'signed_overflow_ok_p'.
1246 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1248 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1249 name of the libtool directory.
1250 * Makefile.in: Rebuild.
1252 2000-02-24 Nick Clifton <nickc@redhat.com>
1254 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1255 (cgen_clear_signed_overflow_ok): New function.
1256 (cgen_signed_overflow_ok_p): New function.
1258 2000-02-23 Andrew Haley <aph@redhat.com>
1260 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1261 m32r-ibld.c, m32r-opc.h: Rebuild.
1263 2000-02-23 Linas Vepstas <linas@linas.org>
1265 * i370-dis.c, i370-opc.c: New.
1267 * disassemble.c (ARCH_i370): Define.
1268 (disassembler): Handle it.
1270 * Makefile.am: Add support for Linux/IBM 370.
1271 * configure.in: Likewise.
1273 * Makefile.in: Regenerate.
1274 * configure: Likewise.
1276 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1278 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1279 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1282 2000-02-22 Andrew Haley <aph@redhat.com>
1284 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1286 * mips-opc.c (G6): New define.
1287 (mips_builtin_op): Add "move" definition for -gp32.
1289 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1291 From Grant Erickson <gerickso@Brocade.COM>:
1292 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1294 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1296 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1299 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1301 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1302 (print_insn_ppi): Likewise.
1303 (print_insn_shx): Use info->mach to select appropriate insn set.
1304 Add support for sh-dsp. Remove FD_REG_N support.
1305 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1306 (sh_arg_type): Likewise. Remove FD_REG_N.
1307 (sh_dsp_reg_nums): New enum.
1308 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1309 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1310 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1311 (arch_sh3_dsp_up): Likewise.
1312 (sh_opcode_info): New field: arch.
1313 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1314 D_REG_N. Fill in arch field. Add sh-dsp insns.
1316 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
1318 * arm-dis.c: Change flavor name from atpcs-special to
1319 special-atpcs to prevent name conflict in gdb.
1320 (get_arm_regname_num_options, set_arm_regname_option,
1321 get_arm_regnames): New functions. API to access the several
1322 flavor of register names. Note: Used by gdb.
1323 (print_insn_thumb): Use the register name entry from the currently
1324 selected flavor for LR and PC.
1326 2000-02-10 Nick Clifton <nickc@redhat.com>
1328 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1330 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1331 "mulsh.h" instructions.
1332 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1334 (print_insn_mcore): Add support for little endian targets.
1335 Add support for MULSH and OPSR classes.
1337 2000-02-07 Nick Clifton <nickc@redhat.com>
1339 * arm-dis.c (parse_arm_diassembler_option): Rename again.
1340 Previous delat did not take.
1342 2000-02-03 Timothy Wall <twall@redhat.com>
1344 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
1345 to adjust target address bounds checking and calculate the
1346 appropriate octet offset into data.
1348 2000-01-27 Nick Clifton <nickc@redhat.com>
1350 * arm-dis.c: (parse_disassembler_option): Rename to
1351 parse_arm_disassembler_option and allow to be exported.
1353 * disassemble.c (disassembler_usage): New function: Print out any
1354 target specific disassembler options.
1355 Call arm_disassembler_options() if the ARM architecture is being
1358 * arm-dis.c (NUM_ELEM): Define this macro if not already
1360 (arm_regname): New struct type for ARM register names.
1361 (arm_toggle_regnames): Delete.
1362 (parse_disassembler_option): Use register name structure.
1363 (print_insn): New function: Combines duplicate code found in
1364 print_insn_big_arm and print_insn_little_arm.
1365 (print_insn_big_arm): Call print_insn.
1366 (print_insn_little_arm): Call print_insn.
1367 (print_arm_disassembler_options): Display list of supported,
1368 ARM specific disassembler options.
1370 2000-01-27 Thomas de Lellis <tdel@windriver.com>
1372 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1373 ARM_STT_16BIT flag as Thumb code symbols.
1375 * arm-dis.c (printf_insn_little_arm): Ditto.
1377 2000-01-25 Thomas de Lellis <tdel@windriver.com>
1379 * arm-dis.c (printf_insn_thumb): Prevent double dumping
1380 of raw thumb instructions.
1382 2000-01-20 Nick Clifton <nickc@redhat.com>
1384 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1386 2000-01-03 Nick Clifton <nickc@cygnus.com>
1388 * arm-dis.c (streq): New macro.
1389 (strneq): New macro.
1390 (force_thumb): ew local variable.
1391 (parse_disassembler_option): New function: Parse a single, ARM
1392 specific disassembler command line switch.
1393 (parse_disassembler_option): Call parse_disassembler_option to
1394 parse individual command line switches.
1395 (print_insn_big_arm): Check force_thumb.
1396 (print_insn_little_arm): Check force_thumb.
1398 For older changes see ChangeLog-9899
1404 version-control: never