opcodes/ChangeLog

   1 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
   4         there are no operand types.
   5
   6 start-sanitize-v850
   7 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
   8
   9         * v850-opc.c (D9_RELAX): Renamed from D9, all references
  10         changed.
  11         (v850_operands): Make sure D22 immediately follows D9_RELAX.
  12
  13 end-sanitize-v850
  14 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
  15
  16         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
  17
  18 start-sanitize-v850
  19 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
  20
  21         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
  22         and sst.w instructions.
  23
  24         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
  25         "bCC"instructions).
  26
  27 end-sanitize-v850
  28 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
  29
  30         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
  31         and the arguments.
  32
  33 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
  34
  35         * ppc-opc.c (PPCPWR2): Define.
  36         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
  37         it.
  38
  39 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
  40
  41         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
  42         field for movhu instruction.
  43 start-sanitize-v850
  44
  45         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
  46         cast value to "long" not "signed long" to keep hpux10
  47         compiler quiet.
  48 end-sanitize-v850
  49
  50 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
  51
  52         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
  53         for mov (abs16),DN.
  54
  55         * mn10300-opc.c (FMT*): Remove definitions.
  56
  57         * mn10300-opc.c (mn10300_opcodes): Fix destination register
  58         for shift-by-register opcodes.
  59
  60         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
  61         into [AD][MN][01] for encoding the position of the register
  62         in the opcode.
  63
  64 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
  65
  66         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
  67         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
  68
  69 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
  70
  71         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
  72         Fix various typos.  Add "PAREN" operand.
  73         (MEM, MEM2): Define.
  74         (mn10300_opcodes): Surround all memory addresses with "PAREN"
  75         operands.  Fix several typos.
  76
  77         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
  78         changes.
  79
  80 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
  81
  82         * mn10300-opc.c (FMT_XX): Renumber starting at one.
  83         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
  84         at this time.
  85         (mn10300_opcodes): Break opcode format out into its own field.
  86         Update many operand fields to deal with signed vs unsigned
  87         issues.  Fix one or two typos in the "mov" instruction
  88         opcode, mask and/or operand fields.
  89
  90 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
  91
  92         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
  93         m68851 wasn't reset.
  94
  95 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
  96
  97         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
  98         all opcodes.  Very rough cut at operands for all opcodes.
  99
 100         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
 101         opcode table.
 102
 103 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
 104
 105         * mn10200-opc.c, mn10300-opc.c: New files.
 106         * mn10200-dis.c, mn10300-dis.c: New files.
 107         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
 108         * disassemble.c: Break mn10x00 support into 10200 and 10300
 109         support.
 110         * configure.in: Likewise.
 111         * configure: Rebuilt.
 112
 113 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
 114
 115         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
 116
 117 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
 118
 119         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
 120         MN10x00 processors.
 121         * disassemble (ARCH_mn10x00): Define.
 122         (disassembler): Handle bfd_arch_mn10x00.
 123         * configure.in: Recognize bfd_mn10x00_arch.
 124         * configure: Rebuilt.
 125
 126 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
 127
 128         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
 129         accordingly.  Don't declare functions using op_rtn.
 130
 131 start-sanitize-v850
 132 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
 133
 134         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
 135         params to be more standard.
 136         * (disassemble):  Print absolute addresses and symbolic names for
 137         branch and jump targets.
 138         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
 139         bit operands.
 140         * (v850_opcodes):  Add breakpoint insn.
 141
 142 end-sanitize-v850
 143 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
 144
 145         * m68k-opc.c: Move the fmovemx data register cases before the
 146         other cases, so that they get recognized before the data register
 147         does gets treated as a degenerate register list.
 148
 149 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
 150
 151         * mips-opc.c: Add a case for "div" and "divu" with two registers
 152         and a destination of $0.
 153
 154 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
 155
 156         * mips-dis.c (print_insn_arg): Add prototype.
 157         (_print_insn_mips): Ditto.
 158
 159 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
 160
 161         * mips-dis.c (print_insn_arg): Print condition code registers as
 162         $fccN.
 163
 164 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
 165
 166         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
 167
 168 start-sanitize-v850
 169 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
 170
 171         * v850-dis.c (disassemble): Make static.  Provide prototype.
 172
 173 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
 174
 175         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
 176         in range checks.
 177
 178 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
 179
 180         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
 181         ']' characters into the output stream.
 182         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
 183         Add "memop" field to all opcodes (for the disassembler).
 184         Reorder opcodes so that "nop" comes before "mov" and "jr"
 185         comes before "jarl".
 186
 187         * v850-dis.c (print_insn_v850): Fix typo in last change.
 188
 189         * v850-dis.c (print_insn_v850): Properly handle disassembling
 190         a two byte insn at the end of a memory region when the memory
 191         region's size is only two byte aligned.
 192
 193         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
 194
 195         * v850-dis.c (v850_reg_names): Define.
 196         (v850_sreg_names, v850_cc_names): Likewise.
 197         (disassemble): Very rough cut at printing operands (unformatted).
 198
 199         * v850-opc.c (BOP_MASK): Fix.
 200         (v850_opcodes): Fix mask for jarl and jr.
 201
 202         * v850-dis.c: New file.  Skeleton for disassembler support.
 203         * Makefile.in Remove v850 references, they're not needed here
 204         and they weren't being sanitized away.
 205         * configure.in: Add v850-dis.o when building v850 toolchains.
 206         * configure: Rebuilt.
 207         * disassemble.c (disassembler): Call v850 disassembler.
 208
 209         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
 210         (insert_d8_6, extract_d8_6): New functions.
 211         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
 212         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
 213         Add D8_6.
 214         (IF4A, IF4B): Use "D7" instead of "D7S".
 215         (IF4C, IF4D): Use "D8_7" instead of "D8".
 216         (IF4E, IF4F): New.  Use "D8_6".
 217         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
 218         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
 219
 220         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
 221         (v850_operands): Change D16 to D16_15, use special insert/extract
 222         routines.  New new D16 that uses the generic insert/extract code.
 223         (IF7A, IF7B): Use D16_15.
 224         (IF7C, IF7D): New.  Use D16.
 225         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
 226
 227         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
 228         message.  Issue an error if the branch offset is odd.
 229
 230         * v850-opc.c: Add notes about needing special insert/extract
 231         for all the load/store insns, except "ld.b" and "st.b".
 232
 233         * v850-opc.c (insert_d22, extract_d22): New functions.
 234         (v850_operands): Use insert_d22 and extract_d22 for
 235         D22 operands.
 236         (insert_d9): Fix range check.
 237
 238 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
 239
 240         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
 241         and set bits field to D9 and D22 operands.
 242
 243 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
 244
 245         * v850-opc.c (v850_operands): Define SR2 operand.
 246         (v850_opcodes): "ldsr" uses R1,SR2.
 247
 248         * v850-opc.c (v850_opcodes): Fix opcode specs for
 249         sld.w, sst.b, sst.h, sst.w, and nop.
 250
 251 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
 252
 253         * v850-opc.c (v850_opcodes): Add null opcode to mark the
 254         end of the opcode table.
 255
 256 end-sanitize-v850
 257 start-sanitize-d10v
 258 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 259
 260         * d10v-opc.c (pre_defined_registers): Added register pairs,
 261         "r0-r1", "r2-r3", etc.
 262
 263 end-sanitize-d10v
 264 start-sanitize-v850
 265 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
 266
 267         * v850-opc.c (v850_operands): Make I16 be a signed operand.
 268         Create I16U for an unsigned 16bit mmediate operand.
 269         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
 270
 271         * v850-opc.c (v850_operands): Define EP operand.
 272         (IF4A, IF4B, IF4C, IF4D): Use EP.
 273
 274         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
 275         with immediate operand, "movhi".  Tweak "ldsr".
 276
 277         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
 278         correct.  Get sld.[bhw] and sst.[bhw] closer.
 279
 280         * v850-opc.c (v850_operands): "not" is a two byte insn
 281
 282         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
 283
 284         * v850-opc.c (v850_operands): D16 inserts at offset 16!
 285
 286         * v850-opc.c (two): Get order of words correct.
 287
 288         * v850-opc.c (v850_operands): I16 inserts at offset 16!
 289
 290         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
 291         register source and destination operands.
 292         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
 293
 294         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
 295         same thinko in "trap" opcode.
 296
 297         * v850-opc.c (v850_opcodes): Add initializer for size field
 298         on all opcodes.
 299
 300         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
 301         Add D8 for 8-bit unsigned field in short load/store insns.
 302         (IF4A, IF4D): These both need two registers.
 303         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
 304         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
 305         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
 306         for "ldsr" and "stsr".
 307         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
 308         is unsigned.
 309
 310         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
 311         short store word (sst.w).
 312
 313 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
 314
 315         * v850-opc.c (v850_operands): Added insert and extract fields,
 316         pointers to functions that handle unusual operand encodings.
 317
 318 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
 319
 320         * v850-opc.c (v850_opcodes): Enable "trap".
 321
 322         * v850-opc.c (v850_opcodes): Fix order of displacement
 323         and register for "set1", "clr1", "not1", and "tst1".
 324
 325 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
 326
 327         * v850-opc.c (v850_operands): Add "B3" support.
 328         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
 329         and "tst1".
 330
 331         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
 332
 333         * v850-opc.c: Close unterminated comment.
 334
 335 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
 336
 337         * v850-opc.c (v850_operands): Add flags field.
 338         (v850_opcodes): add move opcodes.
 339
 340 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
 341
 342         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
 343         * configure: (bfd_v850v_arch) Add new case.
 344         * configure.in: (bfd_v850_arch) Add new case.
 345         * v850-opc.c: New file.
 346
 347 end-sanitize-v850
 348 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
 349
 350         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
 351
 352 start-sanitize-d10v
 353 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 354
 355         * d10v-opc.c: Add additional information to the opcode
 356         table to help determinine which instructions can be done
 357         in parallel.
 358
 359 end-sanitize-d10v
 360 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
 361
 362         * mpw-make.sed: Update editing of include pathnames to be
 363         more general.
 364
 365 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
 366
 367         * arm-opc.h: Added "bx" instruction definition.
 368
 369 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
 370
 371         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
 372
 373 start-sanitize-d10v
 374 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 375
 376         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
 377
 378 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 379
 380         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
 381
 382 end-sanitize-d10v
 383 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
 384
 385         * makefile.vms: Update for alpha-opc changes.
 386
 387 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
 388
 389         * i386-dis.c (print_insn_i386): Actually return the correct value.
 390         (ONE, OP_ONE): #ifdef out; not used.
 391
 392 start-sanitize-d10v
 393 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 394
 395         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
 396         Changed subi operand type to treat 0 as 16.
 397
 398 end-sanitize-d10v
 399 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
 400
 401         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
 402         <rose@netcom.com>.
 403
 404 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
 405
 406         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
 407         memory transfer instructions. Add new format string entries %h and %s.
 408         * arm-dis.c: (print_insn_arm): Provide decoding of the new
 409         formats %h and %s.
 410
 411 start-sanitize-d10v
 412 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 413
 414         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
 415         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
 416
 417 end-sanitize-d10v
 418 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
 419
 420         * alpha-dis.c (print_insn_alpha_osf): Remove.
 421         (print_insn_alpha_vms): Remove.
 422         (print_insn_alpha): Make globally visible.  Chose the register
 423         names based on info->flavour.
 424         * disassemble.c: Always return print_insn_alpha for the alpha.
 425
 426 start-sanitize-d10v
 427 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 428
 429         * d10v-dis.c (dis_long): Handle unknown opcodes.
 430
 431 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 432
 433         * d10v-opc.c: Changes to support signed and unsigned numbers.
 434         All instructions with the same name that have long and short forms
 435         now end in ".l" or ".s".  Divs added.
 436         * d10v-dis.c: Changes to support signed and unsigned numbers.
 437
 438 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 439
 440         * d10v-dis.c: Change all functions to use info->print_address_func.
 441
 442 end-sanitize-d10v
 443 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 444
 445         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
 446         move ccr/sr insns more strict so that the disassembler only
 447         selects them when the addressing mode is data register.
 448
 449 start-sanitize-d10v
 450 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 451         * d10v-opc.c (pre_defined_registers):  Declare.
 452         * d10v-dis.c (print_operand): Now uses pre_defined_registers
 453         to pick a better name for the registers.
 454
 455 end-sanitize-d10v
 456 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
 457
 458         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
 459         operands for fexpand and fpmerge.  From Christian Kuehnke
 460         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
 461
 462 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
 463
 464         * alpha-dis.c (print_insn_alpha): No longer the user-visible
 465         print routine.  Take new regnames and cpumask arguments.
 466         Kill the environment variable nonsense.
 467         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
 468         (print_insn_alpha_vms): New function.  Do VMS style regnames.
 469         * disassemble.c (disassembler): Test bfd flavour to pick
 470         between OSF and VMS routines.  Default to OSF.
 471
 472 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
 473
 474         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
 475         * configure: Rebuild.
 476         * Makefile.in (install): Use @INSTALL_SHLIB@.
 477
 478 start-sanitize-d10v
 479         Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 480
 481         * configure: (bfd_d10v_arch) Add new case.
 482         * configure.in: (bfd_d10v_arch) Add new case.
 483         * d10v-dis.c: New file.
 484         * d10v-opc.c: New file.
 485         * disassemble.c (disassembler) Add entry for d10v.
 486
 487 end-sanitize-d10v
 488 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
 489
 490         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
 491         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
 492
 493 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
 494
 495         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
 496         distinguish between variants of the instruction set.
 497         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
 498         distinguish between variants of the instruction set.
 499
 500 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
 501
 502         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
 503         the 8086 instruction set.
 504         * i386-dis.c:  General cleanups.  Make most things static.  Add
 505         prototypes.  Get rid of static variables aflags and dflags.  Pass
 506         them as args (to almost everything).
 507
 508 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
 509
 510         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
 511
 512         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
 513
 514         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
 515         if the next arg is marked with SRC_IN_DST.  Gross.
 516
 517         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
 518         we're looking for and find EXR.
 519
 520         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
 521         if we're looking for KBIT and we don't find it.
 522
 523         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
 524         for L_3 and L_2.
 525
 526         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
 527         3bit immediate operands.
 528
 529 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
 530
 531         * Released binutils 2.7.
 532
 533         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
 534         <kkaempf@progis.ac-net.de>.
 535
 536 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
 537
 538         * alpha-opc.c: Correct second case of "mov" to use OPRL.
 539
 540 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
 541
 542         * sparc-dis.c (print_insn_sparclite):  New routine to print
 543         sparclite instructions.
 544
 545 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
 546
 547         * m68k-opc.c (m68k_opcodes): Add coldfire support.
 548
 549 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
 550
 551         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
 552         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
 553         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
 554
 555 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
 556
 557         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
 558         Use autoconf-set values.
 559         (docdir, oldincludedir): Removed.
 560         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
 561
 562 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
 563
 564         * alpha-opc.c: New file.
 565         * alpha-opc.h: Remove.
 566         * alpha-dis.c: Complete rewrite to use new opcode table.
 567         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
 568         * configure: Rebuild with autoconf 2.10.
 569         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
 570         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
 571         alpha-opc.h.
 572         (alpha-opc.o): New target.
 573
 574 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
 575
 576         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
 577         Set imm_added_to_rs1 even if the source and destination register
 578         are not the same.
 579
 580         * sparc-opc.c: Add some two operand forms of the wr instruction.
 581
 582 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
 583
 584         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
 585         to just "mode".
 586
 587         * disassemble.c (disassembler): Handle H8/S.
 588         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
 589
 590 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
 591
 592         * sparc-opc.c: Add beq/teq as aliases for be/te.
 593
 594         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
 595         <sergei@msil.sps.mot.com>.
 596
 597 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
 598
 599         * makefile.vms: New file.
 600
 601         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
 602
 603 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
 604
 605         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
 606         regardless of plen.
 607
 608 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
 609
 610         * i386-dis.c (OP_OFF): Call append_prefix.
 611
 612 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 613
 614         * ppc-opc.c (instruction encoding macros): Add explicit casts to
 615         unsigned long to silence a warning from the Solaris PowerPC
 616         compiler.
 617
 618 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
 619
 620         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
 621
 622 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
 623
 624         * sparc-dis.c (X_IMM,X_SIMM): New macros.
 625         (X_IMM13): Delete.
 626         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
 627         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
 628         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
 629         cpush, cpusha, cpull sparclet insns.
 630
 631 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
 632
 633         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
 634
 635 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
 636
 637         * sparc-opc.c: Set F_FBR on floating point branch instructions.
 638         Set F_FLOAT on other floating point instructions.
 639
 640 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 641
 642         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
 643         registers.
 644         (powerpc_opcodes): Add 860/821 specific SPRs.
 645
 646 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
 647
 648         * configure.in: Permit --enable-shared to specify a list of
 649         directories.  Set and substitute BFD_PICLIST.
 650         * configure: Rebuild.
 651         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
 652         uses.  Set to @BFD_PICLIST@.
 653
 654 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
 655
 656         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
 657         not "abs", which may be needed for the absolute in something
 658         like btst #0,@10:8.  Print L_3 immediates separately from other
 659         immediates.  Change ABSMOV reference to ABS8MEM.
 660
 661 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
 662
 663         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
 664         (current_arch_mask): New static global.
 665         (compute_arch_mask): New static function.
 666         (print_insn_sparc): Delete sparc_v9_p.  New static local
 667         current_mach.  Resort opcode table if current_mach changes.
 668         Generalize "insn not supported" test.
 669         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
 670         Delete test for v9/!v9.
 671         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
 672         (v6notlet): Define.
 673         (brfc): Split into CBR and FBR for coprocessor/fp branches.
 674         (brfcx): Renamed to FBRX.
 675         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
 676         coprocessor mnemonics are not supported on the sparclet).
 677         (condf): Renamed to CONDF.
 678         (SLCBCC2): Delete F_ALIAS flag.
 679
 680 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
 681
 682         * sparc-opc.c (sparc_opcodes): rd must be 0 for
 683         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
 684
 685 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
 686
 687         * Makefile.in (config.status): Depend upon BFD VERSION file, so
 688         that the shared library version number is set correctly.
 689
 690 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
 691
 692         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
 693         Miles Bader <miles@gnu.ai.mit.edu>.
 694         * configure: Rebuild.
 695
 696 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
 697
 698         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
 699         malloc.
 700
 701 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
 702
 703         * configure: Rebuild with autoconf 2.8.
 704
 705 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
 706
 707         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
 708         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
 709
 710 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
 711
 712         * configure.in: Don't set SHLIB or SHLINK to an empty string,
 713         since they appear as targets in Makefile.in.
 714         * configure: Rebuild.
 715
 716 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
 717
 718         * mpw-make.sed: Edit out shared library support bits.
 719
 720 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
 721
 722         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
 723         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
 724         (sparc_opcodes): Add sparclet insns.
 725         (sparclet_cpreg_table): New static local.
 726         (sparc_{encode,decode}_sparclet_cpreg): New functions.
 727         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
 728
 729 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
 730
 731         * i386-dis.c (index16): New static variable.
 732         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
 733         other way around.
 734         (OP_indirE): Return result of OP_E.
 735         (OP_E): Check for 16 bit addressing mode, and disassemble
 736         correctly.  Optimised 32 bit case a little.  Don't print
 737         "(base,index,scale)" when sib specifies only an offset.
 738
 739 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
 740
 741         * configure.in: Set and substitute SHLIB_DEP.
 742         * configure: Rebuild.
 743         * Makefile.in (SHLIB_DEP): New variable.
 744         (LIBIBERTY_LISTS, BFD_LIST): New variables.
 745         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
 746         COMMON_SHLIB, add them to piclist with appropriate modifications.
 747         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
 748         here: just use piclist.
 749
 750 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
 751
 752         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
 753         (print_insn_sparc): Rewrite v9/not-v9 tests.
 754         (compare_opcodes): Likewise.
 755         * sparc-opc.c (MASK_<ARCH>): Define.
 756         (v6,v7,v8,sparclite,v9,v9a): Redefine.
 757         (sparclet,v6notv9): Define.
 758         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
 759         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
 760
 761 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
 762
 763         * configure.in: Call AC_PROG_CC before configure.host.
 764         * configure: Rebuild.
 765
 766         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
 767
 768 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
 769
 770         * i386-dis.c (onebyte_has_modrm): New static array.
 771         (twobyte_has_modrm): New static array.
 772         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
 773
 774 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
 775
 776         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
 777         $(SHLINK).
 778
 779 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 780
 781         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
 782         doesn't conflict.
 783
 784 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
 785
 786         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
 787         m68010up, not just m68020up | cpu32.
 788
 789         * Makefile.in (SONAME): New variable.
 790         ($(SHLINK)): Make a link to the transformed name, as well.
 791         (stamp-tshlink): New target.
 792         (install): Skip stamp-tshlink during install.
 793
 794 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
 795
 796         * configure.in: Call AC_ARG_PROGRAM.
 797         * configure: Rebuild.
 798         * Makefile.in (program_transform_name): New variable.
 799         (install): Transform library name before installing it.
 800
 801 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
 802
 803         * i960-dis.c (mem): Add HX dcinva instruction.
 804
 805         Support for building as a shared library, based on patches from
 806         Alan Modra <alan@spri.levels.unisa.edu.au>:
 807         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
 808         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
 809         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
 810         * configure: Rebuild.
 811         * Makefile.in (ALLLIBS): New variable.
 812         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
 813         (COMMON_SHLIB, SHLINK): New variables.
 814         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
 815         (STAGESTUFF): Remove variable.
 816         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
 817         (stamp-piclist, piclist): New targets.
 818         ($(SHLIB), $(SHLINK)): New targets.
 819         ($(OFILES)): Depend upon stamp-picdir.
 820         (disassemble.o): Build twice if PICFLAG is set.
 821         (MOSTLYCLEAN): Add pic/*.o.
 822         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
 823         (distclean): Remove pic and stamp-picdir.
 824         (install): Install shared libraries.
 825         (stamp-picdir): New target.
 826
 827 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
 828
 829         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
 830         Print unknown instruction as "unknown", rather than in hex.
 831
 832 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
 833
 834         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
 835
 836 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
 837
 838         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
 839
 840 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
 841
 842         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
 843         when necessary.  From Ulrich Drepper
 844         <drepper@myware.rz.uni-karlsruhe.de>.
 845
 846 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
 847
 848         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
 849         sparc_num_opcodes.  Update architecture enum values.
 850         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
 851         (sparc_opcode_lookup_arch): New function.
 852         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
 853         (sparc_opcodes): Add v9a shutdown insn.
 854
 855 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
 856
 857         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
 858         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
 859         architecture.
 860         (print_insn_sparc64): Deleted.
 861         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
 862         print_insn_sparc.
 863
 864         * sparc-opc.c (architecture_pname): Add v9a.
 865
 866 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
 867
 868         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
 869         incorrectly defined as 0x16 when it should be 0x15.
 870         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
 871         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
 872         excb (exception barrier) which is defined in the Alpha
 873         Architecture Handbook version 2.
 874         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
 875         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
 876         disassembled as or, for example.
 877
 878 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
 879
 880         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
 881         (_print_insn_mips): Change i from int to unsigned int.
 882
 883 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
 884
 885         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
 886         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
 887
 888 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
 889
 890         * i386-dis.c: Added Pentium Pro instructions.
 891
 892 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 893
 894         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
 895         being for Power2.
 896
 897 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 898
 899         * sh-opc.h (sh_nibble_type): Added REG_B.
 900         (sh_arg_type): Added A_REG_B.
 901         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
 902         and stc.l opcodes.
 903         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
 904
 905 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 906
 907         * disassemble.c (disassembler): Use new bfd_big_endian macro.
 908
 909 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
 910
 911         * Makefile.in (distclean): Remove stamp-h.  From Ronald
 912         F. Guilmette <rfg@monkeys.com>.
 913
 914 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
 915
 916         From David Mosberger-Tang  <davidm@azstarnet.com>:
 917         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
 918         instruction.
 919
 920 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 921
 922         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
 923         (sh_table): Added many SH3 opcodes.
 924         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
 925
 926 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 927
 928         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
 929         (subco,subco.): Mark this PPC, not PPCCOM.
 930
 931 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
 932
 933         * configure: Rebuild with autoconf 2.7.
 934
 935 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
 936
 937         * configure: Rebuild with autoconf 2.6.
 938
 939 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
 940
 941         * configure.in: Sort list of architectures.  Accept but do nothing
 942         for alliant, convex, pyramid, romp, and tahoe.
 943
 944 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
 945
 946         * a29k-dis.c (print_special): Change num to unsigned int.
 947
 948 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
 949
 950         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
 951         shifting it.
 952
 953 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
 954
 955         * configure.in: Call AC_CHECK_PROG to find and cache AR.
 956         * configure: Rebuilt.
 957
 958 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
 959
 960         * configure.in: Add case for bfd_i860_arch.
 961         * configure: Rebuild.
 962
 963 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 964
 965         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
 966         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
 967         (NEXTDOUBLE): Likewise.
 968         (print_insn_m68k): Don't match fmoveml if there is more than one
 969         register in the list.
 970         (print_insn_arg): Handle a place of '8' for a type of 'L'.
 971
 972 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 973
 974         * m68k-opc.c: Use #W rather than #w.
 975         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
 976
 977 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
 978
 979         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
 980         and likewise for all the dbxx opcodes.
 981
 982 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
 983
 984         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
 985
 986 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
 987
 988         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
 989         the VR4100 specific instructions to the mips_opcodes structure.
 990
 991 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
 992
 993         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
 994         ugly Metrowerks bug in CW6, is fixed in CW7.
 995
 996 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 997
 998         * ppc-opc.c (whole file): Add flags for common/any support.
 999
1000 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
1001
1002         * Makefile.in (BISON): Remove macro.
1003         (FLAGS_TO_PASS): Remove BISON.
1004
1005 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
1006
1007         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1008
1009         * m68k-dis.c (print_insn_m68k): Recognize all two-word
1010         instructions that take no args by looking at the match mask.
1011         (print_insn_arg): Always print "%" before register names.
1012         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1013         [case '_']: Don't print "@#" before address.
1014         [case 'J']: Use "%s" as format string, not register name.
1015         [case 'B']: Treat place == 'C' like 'l' and 'L'.
1016
1017 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
1018
1019         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1020         name correctly.
1021
1022 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
1023
1024         From David Mosberger-Tang  <davidm@azstarnet.com>
1025
1026         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1027         (alpha_insn_set): added definitions for VAX floating point
1028         instructions (Unix compilers don't generate these, but handcoded
1029         assembly might still use them).
1030
1031         * alpha-dis.c (print_insn_alpha): added support for disassembling
1032         the miscellaneous instructions in the Alpha instruction set.
1033
1034 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
1035
1036         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1037         no longer create sysdep.h, sed ppc-opc.c to work around a
1038         serious Metrowerks C bug.
1039         * mpw-make.in: Remove.
1040         * mpw-make.sed: New file, used by mpw-configure to edit
1041         Makefile.in into an MPW makefile.
1042
1043 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
1044
1045         * Makefile.in (maintainer-clean): New synonym for realclean.
1046
1047 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
1048
1049         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1050         which use '0', '1', and '2' instead.  Specify the proper size for
1051         a pmove immediate operand.  Correct the pmovefd patterns to be
1052         moves to a register, not from a register.
1053         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1054
1055 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
1056
1057         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1058         %psr, %wim, %tbr as F_NOTV9.
1059
1060 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
1061
1062         * Makefile.in (Makefile): Just rebuild Makefile when running
1063         config.status.
1064         (config.h, stamp-h): New targets.
1065         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1066         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
1067         rebuilding config.h.
1068         * configure: Rebuild.
1069
1070         * mips-opc.c: Change unaligned loads and stores with "t,A"
1071         operands to use "t,A(b)".
1072
1073 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1074
1075         * sh-dis.c (print_insn_shx): Add F_FR0 support.
1076
1077 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1078
1079         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1080         until 3 instead of until 2.
1081
1082 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
1083
1084         * Makefile.in (ALL_CFLAGS): Define.
1085         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1086         (MOSTLYCLEAN): Add config.log.
1087         (distclean): Don't remove config.log.
1088         * configure.in: Substitute HDEFINES.
1089         * configure: Rebuild.
1090
1091 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1092
1093         * sh-opc.h (sh_arg_type): Add F_FR0.
1094         (sh_table, case fmac): Add F_FR0 as first argument.
1095
1096 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1097
1098         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1099
1100 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
1101
1102         * sparc-dis.c: Remove all references to NO_V9.
1103
1104 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
1105
1106         * aclocal.m4: Just include ../bfd/aclocal.m4.
1107         * configure: Rebuild.
1108
1109 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
1110
1111         * sparc-dis.c (X_DISP19): Define.
1112         (print_insn, case 'G'): Use it.
1113         (print_insn, case 'L'): Sign extend displacement.
1114
1115 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
1116
1117         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1118         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
1119         host_makefile_frag or frags.
1120         * aclocal.m4: New file.
1121         * configure: Rebuild.
1122         * Makefile.in (INSTALL): Set to @INSTALL@.
1123         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1124         (INSTALL_DATA): Set to @INSTALL_DATA@.
1125         (AR): Set to @AR@.
1126         (AR_FLAGS): Set to rc rather than qc.
1127         (CC): Define as @CC@.
1128         (CFLAGS): Set to @CFLAGS@.
1129         (@host_makefile_frag@): Remove.
1130         (config.status): Remove dependency upon @frags@.
1131
1132         * configure.in: ../bfd/config.bfd now just sets shell variables.
1133         Use them rather than looking through target Makefile fragments.
1134         * configure: Rebuild.
1135
1136 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1137
1138         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1139
1140 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
1141
1142         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1143         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1144         sparc64 insns.
1145
1146         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1147         (lookup_{name,value}): New functions.
1148         (prefetch_table): New static local.
1149         (sparc_{encode,decode}_prefetch): New functions.
1150         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1151
1152 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1153
1154         * sh-opc.h: Add blank lines to improve readabililty of sh3e
1155         instructions.
1156
1157 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1158
1159         * sh-dis.c: Correct comment on first line of file.
1160
1161 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
1162
1163         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1164
1165         * sparc-opc.c (asi, membar): New static locals.
1166         (sparc_{encode,decode}_{asi,membar}): New functions.
1167         (sparc_opcodes, membar insn): Fix.
1168         * sparc-dis.c (print_insn): Call sparc_decode_asi.
1169         Support decoding of membar masks.
1170         (X_MEMBAR): Define.
1171
1172 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
1173
1174         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1175
1176 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
1177
1178         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1179         and likewise for the other branches.  Add bhs as an alias for bcc,
1180         and likewise for the size variants.  Add dbhs as an alias for
1181         dbcc.
1182
1183 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
1184
1185         * sh-opc.h (FP sts instructions): Update to match reality.
1186
1187 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
1188
1189         * m68k-dis.c: (fpcr_names): Add % before all register names.
1190         (reg_names): Likewise.
1191         (print_insn_arg): Don't explicitly print % before register names.
1192         Add % before register names in static array names.  In case 'r',
1193         print data registers as `@(Dn)', not `Dn@'.  When printing a
1194         memory address, don't print @# before it.
1195         (print_indexed): Change base_disp and outer_disp from int to
1196         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
1197         syntax.  Sign extend 8 byte displacement correctly.
1198         (print_base): Print using MIT syntax.  Print zpc when appropriate.
1199         Change parameter disp from int to bfd_vma.
1200
1201         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1202         for jsr.
1203
1204 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
1205
1206         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1207         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1208         * sh-opc.h (sh_arg_type): Add new operand types.
1209         (sh_table): Add new opcodes from SH3E Floating Point ISA.
1210
1211 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
1212
1213         * Makefile.in (distclean): Remove generated file config.h.
1214
1215 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
1216
1217         * Makefile.in (distclean): Remove generated file config.h.
1218
1219 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
1220
1221         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1222         Clean up tables.
1223         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1224         (opcode): Remove.
1225         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
1226         rather than numopcodes.  Use m68k_opcodes rather than removed
1227         opcode function.  Don't check F_ALIAS.
1228         (print_insn_arg): Change first parameter to be const char *.
1229         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1230         (m68k-opc.o): New target.
1231         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1232         * configure: Rebuild.
1233
1234 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
1235
1236         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1237         (opcode_bits, opcode_hash_table): New variables.
1238         (opcodes_initialized): Renamed from opcodes_sorted.
1239         (build_hash_table): New function.
1240         (is_delayed_branch): Use hash table.
1241         (print_insn): Renamed from print_insn_sparc, made static.
1242         Build and use hash table.  If !sparc64, ignore sparc64 insns,
1243         and vice-versa if sparc64.
1244         (print_insn_sparc, print_insn_sparc64): New functions.
1245         (compare_opcodes): Move sparc64 opcodes to end.
1246         Print commutative insns with constant second.
1247         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1248
1249 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
1250
1251         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
1252         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
1253         avoids printing a delay slot in a delay slot.
1254         * sh-opc.h (sh_table): Fully bracket last entry.
1255
1256 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
1257
1258         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1259
1260 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
1261
1262         * configure.in: Get host_makefile_frag from ${srcdir}.
1263
1264         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
1265         config.h from config.in.  Don't set up sysdep.h link.
1266         * sysdep.h: New file.
1267         * configure, config.in: New files, generated from configure.in.
1268         * Makefile.in: Updated to be processed autoconf-style.
1269         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
1270         (Makefile): Depend on config.status.
1271         (config.status): New rule.
1272         * configure.bat: Update Makefile substitutions.
1273
1274 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
1275
1276         * mips-opc.c (L1): Define.
1277         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1278         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1279         and wb.
1280
1281 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
1282
1283         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1284         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1285         have multiple add units but only a single logical unit.
1286
1287         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1288         shifted by 18, without any insertion or extraction function.
1289         (insert_cr, extract_cr): Remove.
1290
1291 start-sanitize-arc
1292 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
1293
1294         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1295
1296 end-sanitize-arc
1297 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
1298
1299         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1300         register names.
1301
1302 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
1303
1304         * mpw-config.in: Add sh and i386 configs, remove sparc config.
1305         * sh-opc.h: Add copyright.
1306
1307 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
1308
1309         * Makefile.in (crunch-m68k): Delete extra target accidentally
1310         checked in a while ago.
1311
1312 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1313
1314         * sh-opc.h (sh_table): Add SH3 support.
1315
1316 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1317
1318         * sh-opc.h: Added bsrf and braf.
1319
1320 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1321
1322         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
1323         bogus [ls]fm{ea,fd} patterns.
1324
1325         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1326         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1327         initialize it from memory.  Make function static.
1328         (print_insn_{big,little}_arm): New functions.
1329         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1330         the correct endianness.
1331
1332 start-sanitize-arc
1333 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
1334
1335         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1336         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1337 end-sanitize-arc
1338
1339 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
1340
1341         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1342         enum list.
1343
1344 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1345
1346         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1347         17th, so that it builds again using GCC as the compiler.
1348
1349 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
1350
1351         * mips-dis.c (print_insn_little_mips): Cast return value from
1352         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1353         expects an unsigned long, and that might be fewer words of
1354         argument storage (e.g., if bfd_vma is long long on a 32-bit
1355         machine).
1356         (print_insn_big_mips): Likewise with bfd_getb32 value.
1357         (_print_insn_mips): Now static.
1358
1359 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
1360
1361         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1362         gcc memory hog problem with initializer is fixed.
1363
1364 start-sanitize-arc
1365 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
1366
1367         * arc-opc.c (NULL): Define.
1368         (arc_operands, insn fields u,s): Delete.
1369         (arc_operands, insn fields a,b,c): Mark as signed.
1370         (arc_opcodes): No longer const, links computed at run-time.
1371         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1372         suffixes that affect the insn code.
1373         (arc_opcodes): Resort table to macros are first.
1374         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1375         (arc_opcodes, st [b] entry): Likewise.
1376         (arc_opcodes, st [b,d] entry): Fix mask, value.
1377         (arc_reg_names): Add entries for r29, r30, r31, r60.
1378         (opcode_map, icode_map): New static globals.
1379         (arc_opcode_init_tables): Initialize them.
1380         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1381         (insert_shimmoffset): Signal error if register present.
1382         Validate constant.
1383         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1384 end-sanitize-arc
1385
1386 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
1387
1388         Merge in support for Mac MPW as a host.
1389         (Old change descriptions retained for informational value.)
1390
1391         * mpw-config.in (archname): Compute from the config.
1392         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1393
1394         * mpw-config.in (target_arch): Compute from canonical target.
1395         (m68k, mips, powerpc, sparc): Add architectures.
1396         * mpw-make.in (disassemble.c.o): Add.
1397         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1398
1399         * mpw-config.in (BFD_MACHINES): Set to a default value.
1400         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1401
1402         * mpw-make.in (CSEARCH): Add extra-include to search path.
1403
1404         * mpw-config.in (varargs.h): Don't create.
1405         (sysdep.h): Create using forward-include.
1406         * mpw-make.in (CSEARCH): Add include/mpw to search path.
1407
1408         * mpw-config.in: New file, MPW version of configure.in.
1409         * mpw-make.in: New file, MPW version of Makefile.in.
1410
1411 start-sanitize-arc
1412 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
1413
1414         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
1415         Call arc_get_opcode_mach to map bfd mach number to opcode value.
1416         (print_insn_*): Pass bfd mach number, not opcode version.
1417         * arc-opc.c (arc_get_opcode_mach): New function.
1418 end-sanitize-arc
1419
1420 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
1421
1422         * alpha-dis.c (print_insn_alpha): Put empty statement after
1423         default label.
1424
1425 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
1426
1427         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1428         (low_sign_extend): Likewise.
1429         (get_field): Delete unused function.
1430         (set_field, deposit_14, deposit_21): Likewise.
1431
1432 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1433
1434         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
1435           (guy@netapp.com).
1436
1437 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
1438
1439         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
1440
1441         * alpha-opc.h (OSF_ASMCODE): define
1442         print pal-code names as defined in App C of the
1443         Alpha Architecture Reference Manual
1444
1445         * alpha-dis.c: cleaned up output
1446         print stylized code forms as defined in App A.4.3 of the
1447         Alpha Architecture Reference Manual
1448
1449 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
1450
1451         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
1452         `rfe'.
1453         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1454         'N', and 'M'.
1455
1456 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
1457
1458         * m68k-dis.c (opcode): New function.  Returns address of opcode
1459         table entry given index, even if the opcode table was split to
1460         work around gcc bugs.
1461         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1462         directly.
1463         (BREAK_UP_BIG_DECL): Make secondary array static and const.
1464         (reg_names): Now const.
1465         (print_insn_arg): Arrays cacheFieldName and names now const.
1466         (print_indexed): Array scales now const.
1467
1468 start-sanitize-arc
1469 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
1470
1471         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1472         (print_insn_arc_{host,graphics,audio}): Likewise.
1473         (print_insn): Add prototype.
1474         (arc_get_disassembler): New arg `big_p'.  Return little or big
1475         print fn accordingly.
1476         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1477         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1478         (arc_opval_supported): Likewise.
1479         * disassemble.c (disassembler): Pass big endian flag to
1480         arc_get_disassembler.
1481 end-sanitize-arc
1482
1483 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
1484
1485         * ppc-opc.c: Sort recently added instructions by minor opcode
1486         number within major opcode number.
1487
1488 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
1489
1490         * hppa-dis.c: Include libhppa.h.
1491
1492 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
1493
1494         * mips-opc.c: Change dli to use M_DLI, and add dla.
1495
1496 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1497
1498         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
1499
1500 start-sanitize-arc
1501 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
1502
1503         * arc-dis.c (arc_get_disassembler): Change argument to int,
1504         one of bfd_mach_arc_xxx.  All callers updated.
1505 end-sanitize-arc
1506
1507 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
1508
1509         * mips-opc.c: Add r4650 mul instruction.
1510
1511 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
1512
1513         * mips-opc.c: Add uld and usd macros for unaligned double load and
1514         store.
1515
1516 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1517
1518         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1519         mfdcr, mtdcr, icbt, iccci.
1520
1521 start-sanitize-arc
1522 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
1523
1524         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1525         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1526         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1527         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1528         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1529         (insert_absaddr): New function.
1530
1531 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
1532
1533         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1534         New argument `cpu', pass it to arc_opcode_init_tables.
1535         Document byte order dependencies.  Ignore unsupported insns.
1536         (arc_get_disassembler): New function.
1537         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1538         print_insn_arc_audio): New functions.
1539         * arc-opc.c (MULTSHIFT operand): Delete.
1540         (UNSIGNED, SATURATION): New operands.
1541         (mac, mul, mul64, mulu64): New insns.
1542         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1543         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1544         (host,graphics,audio extended and auxiliary regs): Define.
1545         (ss, sc, mh, ml): New suffixes.
1546         (arc_opcode_supported, arc_opval_supported): New functions.
1547         (insert_multshift, extract_multshift): Deleted.
1548         * disassemble.c (disassembler, case bfd_arch_arc): Call
1549         arc_get_disassembler to get disassembler routine.
1550 end-sanitize-arc
1551
1552 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
1553
1554         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1555         signed char fields to shorts, more portable.
1556
1557 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
1558
1559         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1560         char fields as signed chars, since they may have negative values.
1561
1562 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1563
1564         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1565           (mycroft@netbsd.org).
1566
1567 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
1568
1569         From "Logg, Ed" <elogg@ea.com>:
1570         * ppc-opc.c (extract_bdm): Correct parenthezisation.
1571         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1572         value.
1573
1574 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
1575
1576         * ppc-opc.c: Changes based on patch from David Edelsohn
1577         <edelsohn@mhpcc.edu>.
1578         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1579         SPR.
1580         (FXM_MASK): Define.
1581         (insert_tbr): New static function.
1582         (extract_tbr): New static function.
1583         (XFXFXM_MASK, XFXM): Define.
1584         (XSPRBAT_MASK, XSPRG_MASK): Define.
1585         (powerpc_opcodes): Add instructions to access special registers by
1586         name.  Add mtcr and mftbu.
1587
1588 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1589
1590         * mips-opc.c (P3): Define.
1591         (mips_opcodes): Add mad and madu.
1592
1593 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
1594
1595         * configure.in: Add W65 support.
1596         * disassemble.c: Likewise.
1597         * w65-opc.h, w65-dis.c: New files.
1598
1599 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1600
1601         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1602         immediates.
1603
1604 start-sanitize-arc
1605 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
1606
1607         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1608         slot.
1609         * arc-opc.c (extract_reladdr): New function.
1610         (insert_reladdr): Store address right-shifted by 2.
1611 end-sanitize-arc
1612
1613 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1614
1615         * mips-opc.c: Add dli as a synonym for li.
1616
1617 start-sanitize-arc
1618 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
1619
1620         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1621         All uses changed.
1622         (extraction fns): Insn argument now array of two words.  Return pointer
1623         to value's table entry.  All uses changed.
1624         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1625         (insert_multshift, extract_multshift): New fns.
1626         (arc_operands): Add support for cache bypass suffix.  Add support for
1627         predefined aux regs.  Modifier bits moved to flags field.
1628         (arc_opcodes): Likewise.
1629         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
1630         New insn rlc.  Update to syntax in programmer's manual.
1631         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
1632         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
1633         bypass.
1634         (arc_opcode_init_tables): New argument to indicate cpu type.
1635         (insert_reg): Handle predefined aux regs.
1636         (extract_reg): Likewise.
1637         (lookup_register): New fn.
1638         * arc-dis.c (arc_condition_codes): Deleted.
1639         (print_insn_arc): Handle insns with 32 bit immediate constants better.
1640         Clean up modifier handling.  Handle predefined aux regs.
1641 end-sanitize-arc
1642
1643 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
1644
1645         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1646         print something for reserved opcode values, even if it won't
1647         assemble again.
1648
1649         * mips-dis.c (_print_insn_mips): When initializing, shift right
1650         and mask, to avoid sign extension problems on the Alpha.
1651
1652         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1653         control registers.
1654
1655 start-sanitize-arc
1656 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
1657
1658         * configure.in: Add ARC support.
1659         * disassemble.c: Likewise.
1660         * arc-dis.c, arc-opc.c: New files.
1661 end-sanitize-arc
1662
1663 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1664
1665         * sh-opc.h (mov.l gbr): Get direction right.
1666         * sh-dis.c (print_insn_shx): New function.
1667         (print_insn_shl, print_insn_sh): Call print_insn_shx to
1668         print opcodes with right byte order.
1669
1670 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
1671
1672         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1673         to avoid conflicts with getopt.
1674
1675 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1676
1677         * hppa-dis.c (print_insn_hppa): Read the instruction using
1678         bfd_getb32, so that it works on a little endian or 64 bit host.
1679         Remove unused local variable op.
1680
1681 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1682
1683         * mips-opc.c: Use or instead of addu for pseudo-op move, since
1684         addu does not work correctly if -mips3.
1685
1686 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1687
1688         * a29k-dis.c (print_special): Add special register names defined
1689         on 29030, 29040 and 29050.
1690         (print_insn): Handle new operand type 'I'.
1691
1692 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1693
1694         * Makefile.in (INSTALL): Use top level install.sh script.
1695
1696 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1697
1698         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1699         that it works on a little endian host.
1700
1701 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1702
1703         * configure.in: Use ${config_shell} when running config.bfd.
1704
1705 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1706
1707         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1708
1709 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1710
1711         * a29k-dis.c (print_insn): Print the opcode.
1712
1713 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1714
1715         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1716
1717 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
1718
1719         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1720
1721 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1722
1723         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1724         which store a value into memory.
1725
1726 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1727
1728         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1729         * arm-dis.c, arm-opc.h: New files.
1730
1731 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
1732
1733         * Makefile.in (ns32k-dis.o): Add dependency.
1734         * ns32k-dis.c (print_insn_arg): Declare initialized local as
1735         string, not as array of chars.
1736
1737 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1738
1739         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1740
1741         * sparc-opc.c: Added sparclite extended FP operations, and
1742         versions of v9 impdep* instructions permitting specification of
1743         the OPF field.
1744
1745 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1746
1747         * i960-dis.c (reg_names): Now const.
1748         (struct sparse_tabent): New type, copied from array type in mem
1749         function.
1750         (ctrl): Local static array ctrl_tab now const.
1751         (cobr): Local static array cobr_tab now const.
1752         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
1753         static variable mem_tab no longer explicitly initialized.  Changed
1754         mem_init to const array of struct sparse_tabent.
1755         (reg): Local static variable reg_tab no longer explicitly
1756         initialized.  Changed reg_init to const array of struct
1757         sparse_tabent.
1758         (ea): Local static array scale_tab now const.
1759
1760         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1761         (REG_MAX): Updated.
1762
1763 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
1764
1765         * configure.bat: the disassember needs to be enabled for
1766         "objdump -d" to work in djgpp.
1767
1768 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1769
1770         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1771         (invalid_float): Enabled general version, doesn't require running
1772         on ns32k host.  Changed to take char* argument, and test for
1773         explicitly specified sizes, instead of using sizeof() on host CPU
1774         types.
1775         (INVALID_FLOAT): Cast first argument.
1776         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1777         list_P032, list_M032): Now const.
1778         (optlist, list_search): Made appropriate arguments now point to
1779         const.
1780         (print_insn_arg): Changed static array of one-character-string
1781         pointers into a static const array of characters; fixed sprintf
1782         statement accordingly.
1783
1784 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
1785
1786         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
1787         from distribution. A ns32k-dis.c from a previous distribution has
1788         been brought up to date and supports the new interface.
1789
1790         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1791
1792         * configure.in: add bfd_ns32k_arch target support.
1793
1794         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1795         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1796
1797 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
1798
1799         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1800         disassembly right.
1801
1802 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
1803
1804         * h8300-dis.c, mips-dis.c: Don't use true and false.
1805
1806 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
1807
1808         * configure.in: Change --with-targets to --enable-targets.
1809
1810 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1811
1812         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1813         opcodes to the first instruction with that opcode, to speed
1814         disassembly of large files.  From ralphc@pyramid.com (Ralph
1815         Campbell).
1816
1817 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1818
1819         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1820
1821 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
1822
1823         * configure.bat: update to latest makefile.in
1824
1825 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
1826
1827         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1828         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1829         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1830         slot insn is in a delay slot.
1831         * z8k-opc.h: (resflg): Fix patterns.
1832         * h8500-opc.h Fix CR insn patterns.
1833
1834 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1835
1836         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1837         "cmpl" before POWER versions, so that gas -many uses them.
1838
1839 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1840
1841         * disassemble.c: New file.
1842         * Makefile.in (OFILES): Add disassemble.o.
1843         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1844         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
1845         binutils/configure.in.
1846
1847         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1848         opcode being examined.
1849
1850 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1851
1852         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1853         (insert_ral, insert_ram, insert_ras): New functions.
1854         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1855         RAS for store with update.
1856
1857 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1858
1859         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
1860         (edelsohn@npac.syr.edu).
1861
1862 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1863
1864         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1865         immediate argument.
1866
1867 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
1868
1869         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1870
1871 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1872
1873         * ppc-opc.c (powerpc_operands): The signedp field has been
1874         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
1875         instead.  Add new operand SISIGNOPT.
1876         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1877         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1878         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1879         than signedp field.
1880
1881 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1882
1883         * i386-dis.c (struct private):  Renamed to dis_private. `private'
1884         is a reserved word for dynix cc.
1885
1886 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1887
1888         * configure.in: Change error message to refer to bfd/config.bfd
1889         rather than bfd/configure.in.
1890
1891 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
1892
1893         * ppc-opc.c: Define POWER2 as short alias flag.
1894         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1895         fsqrt.
1896
1897 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1898
1899         * i960-dis.c (print_insn_i960): Don't read a second word for
1900         opcodes 0, 1, 2 and 3.
1901
1902 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1903
1904         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1905
1906 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1907
1908         * m68881-ext.c: Removed; no longer used.
1909         * Makefile.in: Changed accordingly.
1910
1911         * m68k-dis.c (ext_format_68881): Don't declare.
1912         (print_insn_m68k): If an instruction uses place 'i', it uses at
1913         least four fixed bytes.
1914         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
1915         extended float, convert to double using floatformat_to_double, not
1916         ieee_extended_to_double, and fetch the data before converting it.
1917
1918 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1919
1920         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
1921         davidj@ICSI.Berkeley.EDU (David Johnson).
1922
1923 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1924
1925         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1926         PowerPC uses bdnz[l][a].
1927
1928 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1929
1930         * dis-buf.c, i386-dis.c:  Include sysdep.h.
1931
1932 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1933
1934         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1935
1936         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1937         by Motorola PowerPC 601 with PPC_OPCODE_601.
1938         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1939         Disassemble Motorola PowerPC 601 instructions as well as normal
1940         PowerPC instructions.
1941
1942 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1943
1944         * i960-dis.c (reg, mem): Just use a static array instead of
1945         calling xmalloc.
1946
1947 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1948
1949         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1950         condition name index if this is for a negated condition.
1951
1952         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1953         Floating point format for 'H' operand is backwards from normal
1954         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
1955         operands (fmpyadd and fmpysub), handle bizarre register
1956         translation correctly for single precision format.
1957
1958         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1959         or 'I' operands if the next format specifier is 'M' (fcmp
1960         condition completer).
1961
1962 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1963
1964         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1965         single number giving a bitmask for the MB and ME fields of an M
1966         form instruction.  Change NB to accept 32, and turn it into 0;
1967         also turn 0 into 32 when disassembling.  Seperated SH from NB.
1968         (insert_mbe, extract_mbe): New functions.
1969         (insert_nb, extract_nb): New functions.
1970         (SC_MASK): Mask out SA and LK bits.
1971         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1972         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
1973         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
1974         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1975         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1976         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
1977         (powerpc_macros): Define table of macro definitions.
1978         (powerpc_num_macros): Define.
1979
1980         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1981         if PPC_OPERAND_NEXT is set.
1982
1983 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1984
1985         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1986         char.  Retrieve contents using bfd_getl32 instead of shifting.
1987
1988 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1989
1990         * ppc-opc.c: New file.  Opcode table for PowerPC, including
1991         opcodes for POWER (RS/6000).
1992         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
1993         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1994         (CFILES): Add ppc-dis.c.
1995         (ppc-dis.o, ppc-opc.o): New targets.
1996         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1997
1998 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1999
2000         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2001         No space before 'u', 'f', or 'N'.
2002
2003 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
2004
2005         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2006         farther than we should.
2007
2008         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2009
2010 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
2011
2012         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2013
2014 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
2015
2016         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2017         needs it, to prevent reading past the end of a section.
2018
2019 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2020
2021         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2022         Removed t,A case for la; always use t,A(b) case.
2023
2024 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2025
2026         From Ted Lemen <mellon@pepper.ncd.com>
2027         * mips-dis.c (print_insn_arg): Handle 'k'.
2028         * mips-opc.c: Make cache use k, not t.
2029
2030 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2031
2032         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
2033         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2034         FLOAT_FORMAT_CODE to put out floating point register names.
2035
2036 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2037
2038         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2039
2040 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2041
2042         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2043
2044 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2045
2046         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2047         larger than 32.  Moved dsxx32 variants first for disassembler.
2048
2049 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
2050
2051         * z8kgen.c, z8k-opc.h: Add full lda information.
2052
2053 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
2054
2055         * hppa-dis.c (print_insn_hppa): Do not emit a space after
2056         movb instructions.  Any necessary space will be emitted by
2057         the code to handle nullification completers.
2058
2059 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2060
2061         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2062
2063 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2064
2065         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
2066         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
2067
2068 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2069
2070         * mips-opc.c: Correct lwu opcode value (book had it wrong).
2071
2072 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
2073
2074         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2075         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2076
2077 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
2078
2079         * m88k-dis.c (m88kdis): comment change.  Remove space after
2080           printing mnemonic.
2081           (printop): handle new arg types DEC and XREG for m88110.
2082
2083 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
2084
2085         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2086         type for absolute branch addresses.  Delete special
2087         "ble" and "be" code in 'W' operand code.
2088
2089 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2090
2091         * mips-opc.c: Set hazard information correctly for branch
2092         likely instructions.
2093
2094 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2095
2096         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
2097         info->fprintf_func for printing and info->print_address_func for
2098         address output.
2099
2100 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2101
2102         * mips-opc.c: Set INSN_TRAP for tXX instructions.
2103
2104 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2105
2106         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2107         Corrected second case of "b" for disassembler.
2108
2109 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2110
2111         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
2112         to BFD swapping routines to correspond to BFD name changes.
2113
2114 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2115
2116         * mips-opc.c: Change div machine instruction to be z,s,t rather
2117         than s,t.  Change div macro to be d,v,t rather than d,s,t.
2118         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
2119         rem and remu which generates only the corresponding div
2120         instruction.  This is for compatibility with the MIPS assembler,
2121         which only generates the simple machine instruction when an
2122         explicit destination of $0 is used.
2123         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2124
2125 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2126
2127         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2128         WR_31 hazard for bal, bgezal, bltzal.
2129
2130 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2131
2132         * hppa-dis.c (print_insn_hppa): Use print function
2133         from within the disassemble_info, not fprintf_filtered.
2134
2135 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2136
2137         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
2138         Law, law@cs.utah.edu.)
2139
2140 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2141
2142         * mips-opc.c ("absu"): Removed.
2143         ("dabs"): Added.
2144
2145 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2146
2147         * mips-opc.c: Added r6000 and r4000 instructions and macros.
2148         Changed hazard information to distinguish between memory load
2149         delays and coprocessor load delays.
2150
2151 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2152
2153         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
2154
2155 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
2156
2157         * configure.in: Don't pass cpu to config.bfd.
2158
2159 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2160
2161         * m88k-dis.c (m88kdis): Make class unsigned.
2162
2163 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
2164
2165         * alpha-dis.c (print_insn_alpha): One branch format case was
2166         missing the instruction name.
2167
2168 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
2169
2170         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2171         Add the arch-specific auxiliary files.
2172         (OFILES): Remove the arch-specific auxiliary files
2173         and use BFD_MACHINES instead of DIS_LIBS.
2174         * configure.in: Set BFD_MACHINES based on --with-targets option.
2175
2176 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2177
2178         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
2179         for swc1.
2180
2181 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2182
2183         * sparc-opc.c: Change CONST to const to deal with gcc
2184         -Dconst=__const -traditional.
2185
2186 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2187
2188         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2189         coprocessor instructions out of #if 0, and made them use new
2190         argument type "C".
2191
2192 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2193
2194         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2195
2196 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
2197
2198         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2199         instruction, for use by the disassembler.
2200
2201         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
2202         hand-coded sign extensions that depended on 32-bit host ints.
2203         FIXME, we still depend on big-endian host bitfield ordering.
2204         (sparc_print_insn):  Set the insn_info_valid field, and the
2205         other fields that describe the instruction being printed.
2206
2207 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
2208
2209         * sparc-opc.c (call): Accept all 6 addressing modes valid for
2210         `jmp' instead of just one of them.
2211
2212 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
2213
2214         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2215         (fput_fp_reg_r): Renamed from fput_reg_r.
2216         (fput_fp_reg): New function.
2217         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2218
2219         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2220
2221         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2222
2223 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
2224
2225         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2226
2227         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2228         don't output a space.
2229
2230         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2231
2232 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
2233
2234         * mips-opc.c: New file, containing opcode table from
2235         ../include/opcode/mips.h.
2236         * Makefile.in: Add it.
2237
2238 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2239
2240         * m88k-dis.c: New file, moved in from gdb and changed to use the
2241         new dis-asm.h disassembler interface.
2242         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2243         (m88k-dis.o): New target.
2244
2245 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
2246
2247         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2248         argument string const char * to correspond to opcode/mips.h.
2249
2250 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
2251
2252         * mips-dis.c: Updated to account for name changes in new version
2253         of opcode/mips.h.
2254         * Makefile.in: Added header file dependencies.
2255
2256 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
2257
2258         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2259
2260 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2261
2262         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2263         extend, rather than shifts.
2264
2265 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
2266
2267         * Makefile.in: Undo 15 June change.
2268
2269 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
2270
2271         * m68k-dis.c (print_insn_arg):  Change return value to byte count
2272         or error code.
2273         * m68k-dis.c:  Re-write to detect invalid operands before
2274         printing anything, so we can handle this the same way we
2275         handle invalid opcodes.
2276
2277 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
2278
2279         * sh-dis.c, sh-opc.h: Understand some more opcodes.
2280
2281 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
2282
2283         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2284         header files.
2285
2286 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2287
2288         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2289
2290         * configure.in: Do make sysdep.h link.
2291         * Makefile.in: Search ../include.  Don't search ../bfd.
2292
2293 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
2294
2295         Changes from Jeff Law, law@cs.utah.edu:
2296         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
2297         Do not print a space before the completers specified by
2298         'a' and 'd'.
2299
2300 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
2301
2302         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2303         defined, since gdb has been fixed.
2304
2305         Changes from Jeff Law, law@cs.utah.edu:
2306         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2307         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2308         be a *disassemble_info, not a *FILE.
2309         * hppa-dis.c: Support 'd', '!', and 'a'.
2310         * hppa-dis.c: Support 's' to extract a 2 bit space register.
2311         * hppa-dis.c: Delete cases which are no longer needed.
2312
2313 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
2314
2315         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2316
2317 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
2318
2319         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2320         H8/300-H opcodes.
2321
2322 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
2323
2324         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2325         * configure.in:  No longer need to configure to get sysdep.h.
2326
2327 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
2328
2329         * Patches from Jeffrey Law <law@cs.utah.edu>.
2330         * hppa-dis.c: Support 'I', 'J', and 'K' in output
2331         templates for 1.1 FP computational instructions.
2332
2333 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2334
2335         * h8500-dis.c (print_insn_h8500): Address argument is type
2336         bfd_vma.
2337         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2338         Ditto.
2339
2340         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2341         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2342
2343         * sparc-dis.c (compare_opcodes): Move static declaration to
2344         top-level.
2345
2346 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2347
2348         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2349         instruction, remove unimp hack from 'l' argument.
2350
2351 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
2352
2353         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
2354         happy.
2355
2356 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
2357
2358         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2359         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2360         instructions.
2361
2362 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2363
2364         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
2365         arrays of string pointers to 2-d arrays of chars, to save
2366         space.
2367
2368 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
2369
2370         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2371         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2372
2373 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2374
2375         * hppa-dis.c: New file from Utah, adapted to new disassembler
2376         calling interface.
2377         * Makefile.in: Include it.
2378
2379 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2380
2381         * sh-dis.c, sh-opc.h: New files.
2382
2383 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2384
2385         * alpha-dis.c, alpha-opc.h: New files.
2386
2387 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2388
2389         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2390         value.
2391
2392 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
2393
2394         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2395
2396 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
2397
2398         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2399         const.
2400
2401 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
2402
2403         * sparc-dis.c: Use fprintf_func a few places where I forgot,
2404         and double percent signs a few places.
2405
2406         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2407
2408         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2409         Use info->print_address_func not print_address.
2410
2411         * dis-buf.c (generic_print_address): New function.
2412
2413 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2414
2415         * Makefile.in: Add sparc-dis.c.
2416         sparc-dis.c: New file, merges binutils and gdb versions as follows:
2417         From GDB:
2418             Add `add' instruction to the set that get checked
2419             for a preceding `sethi' in order to print an absolute address.
2420             * (print_insn):  Disassembly prefers real instructions.
2421             (is_delayed_branch):  Speed up.
2422             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
2423             Still missing some float ops, and needs testing.
2424             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2425             F_ALIAS.  Use printf, not fprintf, when not passing a file
2426             pointer...
2427             (compare_opcodes): Check that identical instructions have
2428             identical opcodes, complain otherwise.
2429         From binutils:
2430             * New 'm' arg.
2431             * Include reg_names.
2432         From neither:
2433             Use dis-asm.h/read_memory_func interface.
2434
2435 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
2436
2437         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2438           deliberately return non-zero to setjmp from longjmp.  Otherwise
2439           this code fails to compile.
2440
2441 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
2442
2443         * m68k-dis.c:  Fix prototype for fetch_arg().
2444
2445 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2446
2447         * dis-buf.c: New file, for new read_memory_func interface.
2448         Makefile.in (OFILES): Include it.
2449         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2450         Use new read_memory_func interface.
2451
2452 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2453
2454         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2455         * h8500-opc.h: Fix couple of opcodes.
2456
2457 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
2458
2459         * Makefile.in: add dvi & installcheck targets
2460
2461 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
2462
2463         * Makefile.in:  Update for h8500-dis.c.
2464
2465 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2466
2467         * h8500-dis.c, h8500-opc.h: New files
2468
2469 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
2470
2471         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
2472         ../include/dis-asm.h.
2473         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
2474         and ../gdb/m68k-pinsn.c).
2475         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
2476         and ../gdb/i386-pinsn.c).
2477         * m68881-ext.c:  New file.  Moved definition of
2478         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2479         * Makefile.in:  Adjust for new files.
2480         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
2481         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
2482         can be dis-assembled.
2483
2484 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2485
2486         * mips-dis.c (print_insn_arg): Now returns void.
2487
2488 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
2489
2490         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
2491         files that use the macros.
2492
2493 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2494
2495         * mips-dis.c: New file, from gdb/mips-pinsn.c.
2496         * Makefile.in (DIS_LIBS): Added mips-dis.o.
2497         (CFILES): Added mips-dis.c.
2498
2499 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2500
2501         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2502         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2503
2504 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
2505
2506         * Makefile.in:  Improve *clean rules.
2507         * configure.in:  Allow a default host.
2508
2509 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
2510
2511         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2512         files include other sysdep files
2513
2514 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
2515
2516         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2517
2518 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
2519
2520         * configure.in:  For host support, use ../bfd/configure.host
2521         so it stays in sync with the ../bfd/hosts database.
2522
2523 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
2524
2525         * configure.in: use cpu-vendor-os triple instead of nested cases
2526
2527 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
2528
2529         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2530         *always* the wrong one.
2531
2532 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
2533
2534         * z8kgen.c: added copyright info
2535
2536 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
2537
2538         * z8k-dis.c (unparse_instr): prettier tabs
2539         * z8kgen.c -> z8k-opc.h: bug fixes in tables
2540
2541 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
2542
2543         * configure.in:  Add ncr* configuration.
2544         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
2545         picayune ANSI compilers happy.
2546
2547 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
2548
2549         * configure.in (i386):  Make i386 and i486 synonymous for now.
2550         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
2551
2552 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2553
2554         * Makefile.in (install): Fix typo.
2555
2556 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
2557
2558         * Makefile.in (make):  Remove obsolete crud.
2559         (sparc-opc.o):  Avoid Sun Make VPATH bug.
2560
2561 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
2562
2563         * Makefile.in: since there are no SUBDIRS, remove rule and
2564         references of subdir_do.
2565
2566 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2567
2568         * Makefile.in (install): Get the library name right here too.
2569         Don't install bfd.h, since it's unrelated to this library.  No
2570         subdirs to recurse into, either.
2571         (CFILES): The source file has a .c suffix, not .o.
2572
2573         * sparc-opc.c: New file, moved from BFD.
2574         * Makefile.in (OFILES): Build it.
2575
2576 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
2577
2578         * z8k-dis.c: fixed forward refferences of some declarations.
2579
2580 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
2581
2582         * Makefile.in: get the name of the library right
2583
2584 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
2585
2586         * z8k-dis.c: knows how to disassemble z8k stuff
2587         * z8k-opc.h: new file full of z8000 opcodes
2588
2589 \f
2590 Local Variables:
2591 version-control: never
2592 End: