1 2001-11-14 Alan Modra <amodra@bigpond.net.au>
3 * disassemble.c (disassembler): Call print_insn_i386.
4 * i386-dis.c (SUFFIX_ALWAYS): Define.
5 (struct dis_private): Add orig_sizeflag.
6 (print_insn_i386): Make it a wrapper, calling..
7 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
8 warning without using volatile by moving orig_sizeflag to priv,
9 and removing inbuf. Parse disassembler_options.
10 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
12 (putop): Remove #ifdef SUFFIX_ALWAYS.
14 2001-11-11 Timothy Wall <twall@alum.mit.edu>
16 * tic54x-dis.c: Use revised opcode structure. Export opcode
18 (has_lkaddr): Don't forget about Lmem insns.
19 * tic54x-opc.c: Add emulation trap. Parallel table now uses
20 standard opcode templates.
22 2001-11-13 Zack Weinberg <zack@codesourcery.com>
24 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
25 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
26 category instead of Ew.
28 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
30 * m68k-opc.c: Fix definitions of wddata[bwl].
32 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
34 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
35 fit in the buffer, try to match the empty keyword.
37 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
39 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
40 * fr30-ibld.c: Regenerate.
41 * m32r-ibld.c: Regenerate.
42 * openrisc-ibld.c: Regenerate.
44 2001-11-04 Chris Demetriou <cgd@broadcom.com>
46 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
48 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
50 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
51 * configure: Regernate.
56 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
58 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
61 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
63 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
65 * Makefile.in: Regenerate.
66 * mmix-dis.c, mmix-opc.c: New files.
68 2001-10-29 Kazu Hirata <kazu@hxi.com>
70 * d30v-dis.c: Fix a comment typo.
72 2001-10-23 Chris Demetriou <cgd@broadcom.com>
74 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
75 "bltzall" as writing GPR 31 (since they do).
77 * mips-dis.c (print_insn_arg): Calculate info->target
79 (print_insn_mips): Fill in instruction info.
80 (print_mips16_insn_arg): Remove unneded variable 'val'.
81 Removed duplicated instruction target calculations,
82 calculate once and print that result. Use same idiom for
83 masking the jump segment bits as is used in print_insn_arg.
85 2001-10-20 Alan Modra <amodra@bigpond.net.au>
87 * ppc-opc.c (CT): Make it an optional operand.
89 2001-10-17 Chris Demetriou <cgd@broadcom.com>
91 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
92 SB-1 binaries include instructions specific to the SB-1.
93 * mips-opc.c (SB1): New definition.
94 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
95 "recip.ps", "rsqrt.ps", and "sqrt.ps".
97 2001-10-17 matthew green <mrg@redhat.com>
99 * ppc-opc.c (STRM): New AltiVec operand.
100 (XDSS): New AltiVec instruction form.
101 (mtvscr): Correct operand list.
102 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
104 2001-10-17 Alan Modra <amodra@bigpond.net.au>
106 * po/POTFILES.in: Regenerate.
108 2001-10-13 matthew green <mrg@redhat.com>
110 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
111 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
112 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
114 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
116 * cgen-ibld.in: Include safe-ctype.h in preference to
118 * cgen-asm.in: Include safe-ctype.h in preference to
119 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
120 TOLOWER instead of tolower.
121 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
122 string elements in constructed regular expression.
123 * fr30-asm.c: Regenerate.
124 * fr30-desc.c: Regenerate.
125 * fr30-ibld.c: Regenerate.
126 * m32r-asm.c: Regenerate.
127 * m32r-desc.c: Regenerate.
128 * m32r-ibld.c: Regenerate.
129 * openrisc-asm.c: Regenerate.
130 * openrisc-desc.c: Regenerate.
131 * openrisc-ibld.c: Regenerate.
132 * po/opcodes.pot: Regenerate.
134 2001-10-12 matthew green <mrg@redhat.com>
136 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
137 instruction field instruction/extraction functions for new BookE
138 DE form instructions.
139 (CT): New macro for CT field in an X form instruction.
140 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
142 (PPC64): Don't include PPC_OPCODE_PPC.
143 (403): New opcode macro for PPC403 processors.
144 (BOOKE): New opcode macro for BookE processors.
145 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
146 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
147 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
148 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
149 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
150 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
151 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
152 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
153 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
154 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
155 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
156 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
157 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
158 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
160 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
161 for a disassembler option of `booke', `booke32' or `booke64' to enable
162 BookE support in the disassembler.
164 2001-10-12 John Healy <jhealy@redhat.com>
166 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
167 for the length when extracting the base part of the insn.
169 2001-10-09 Bruno Haible <haible@clisp.cons.org>
171 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
172 regular expression. Fix some formatting problems.
173 * fr30-asm.c: Regenerate.
174 * openrisc-asm.c: Regenerate.
175 * m32r-asm.c: Regenerate.
177 2001-10-09 Christian Groessler <cpg@aladdin.de>
179 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
180 of indirect register memory accesses to be same format the
183 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
185 * sh-opc.h: Fix encoding of least significant nibble of the
186 DSP single data transfer instructions.
188 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
191 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
193 * cgen-asm.in: Fix compile time warning messages in generated
195 * cgen-dis.in: The same.
196 * cgen-ibld.in: The same.
197 * fr30-asm.c: Regenerate.
198 * fr30-desc.c: Regenerate.
199 * fr30-dis.c: Regenerate.
200 * fr30-ibld.c: Regenerate.
201 * fr30-opc.c: Regenerate.
202 * m32r-asm.c: Regenerate.
203 * m32r-desc.c: Regenerate.
204 * m32r-dis.c: Regenerate.
205 * m32r-ibld.c: Regenerate.
206 * m32r-opc.c: Regenerate.
207 * m32r-opinst.c Regenerate.
208 * openrisc-asm.c: Regenerate.
209 * openrisc-desc.c: Regenerate.
210 * openrisc-dis.c: Regenerate.
211 * openrisc-ibld.c: Regenerate.
212 * openrisc-opc.c: Regenerate.
213 * openrisc-opc.h: Regenerate.
214 * Makefile.in: Regenerate.
215 * po/POTFILES.in: Regenerate.
216 * po/opcodes.pot: Regenerate.
218 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
220 * arm-opc.h (arm_opcodes): Add cirrus insns.
222 * arm-dis.c (print_insn_arm): Add 'I' case.
224 2001-10-03 Alan Modra <amodra@bigpond.net.au>
226 * po/POTFILES.in: Regenerate.
227 * configure: Regenerate.
229 2001-10-02 Alan Modra <amodra@bigpond.net.au>
231 * Makefile.am (Makefile): Depend on bfd/configure.in.
233 * Makefile.in: Regenerate.
235 2001-09-30 John Healy <jhealy@redhat.com>
237 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
238 calls to cgen_get_insn_value and cgen_put_insn_value calls.
239 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
241 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
243 * Makefile.am: Update dependencies with "make dep-am".
244 * Makefile.in: Regenerate.
246 2001-09-26 Alan Modra <amodra@bigpond.net.au>
248 * arc-dis.c: Formatting fixes.
249 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
251 2001-09-21 Bruno Haible <haible@clisp.cons.org>
253 * arc-dis.c: Don't include <ctype.h>.
254 * openrisc-desc.c: Likewise.
255 * openrisc-ibld.c: Likewise.
257 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
259 * fr30-opc.c: Fix compile time warning messages.
260 * i370-opc.c: Fix compile time warning messages.
261 * i960-dis.c: Fix compile time warning messages.
262 * m32r-asm.c: Fix compile time warning messages.
263 * m32r-desc.c: Fix compile time warning messages.
264 * m32r-dis.c: Fix compile time warning messages.
265 * m32r-ibld.c: Fix compile time warning messages.
266 * m32r-opc.c: Fix compile time warning messages.
267 * m32r-opinst.c: Fix compile time warning messages.
268 * ns32k-dis.c: Fix compile time warning messages.
269 * openrisc-asm.c: Fix compile time warning messages.
270 * openrisc-desc.c: Fix compile time warning messages.
271 * openrisc-dis.c: Fix compile time warning messages.
272 * openrisc-ibld.c: Fix compile time warning messages.
273 * openrisc-opc.c: Fix compile time warning messages.
274 * pdp11-dis.c: Fix compile time warning messages.
275 * tic54x-dis.c: Fix compile time warning messages.
276 * v850-opc.c: Fix compile time warning messages.
277 * vax-dis.c: Fix compile time warning messages.
278 * w65-opc.h: Fix compile time warning messages.
279 * z8k-opc.h: Fix compile time warning messages.
280 * z8kgen.c: Fix compile time warning messages.
282 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
284 * arm-dis.c: Fix compile time warning messages.
285 * cgen-asm.c: Fix compile time warning messages.
286 * cgen-dis.c: Fix compile time warning messages.
287 * cris-dis.c: Fix compile time warning messages.
288 * d10v-dis.c: Fix compile time warning messages.
289 * fr30-asm.c: Fix compile time warning messages.
290 * fr30-desc.c: Fix compile time warning messages.
291 * fr30-dis.c: Fix compile time warning messages.
292 * fr30-ibld.c: Fix compile time warning messages.
294 2001-09-18 Bruno Haible <haible@clisp.cons.org>
296 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
297 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
298 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
299 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
301 (cgen_keyword_add): Use ISALNUM instead of isalnum.
302 (hash_keyword_name): Use TOLOWER instead of tolower.
303 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
304 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
306 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
307 * fr30-desc.c: Don't include <ctype.h>.
308 * fr30-ibld.c: Likewise.
309 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
310 (load_insn_classes, parse_resource_users, load_depfile): Use
311 ISSPACE instead of isspace.
312 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
313 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
315 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
316 * m32r-desc.c: Don't include <ctype.h>.
317 * m32r-ibld.c: Likewise.
318 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
319 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
321 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
323 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
325 * Makefile.am: Add rules and dependencies to create the s/390 opcode
326 table out of s390-opc.txt automatically.
327 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
328 * s390-mkopc.c (dumpTable): Change output to create a complete file.
329 * s390-opc.c: New improved opcode format macros and remove the
330 pregenerated opcode table.
331 * s390-opc.txt: Adapt to new improved opcode format macros.
333 2001-09-14 David Schleef <ds@schleef.org>
335 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
337 2001-09-04 Alan Modra <amodra@bigpond.net.au>
339 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
340 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
342 2001-08-31 Eric Christopher <echristo@redhat.com>
343 Jason Eckhardt <jle@redhat.com>
345 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
346 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
349 2001-08-31 Andreas Jaeger <aj@suse.de>
351 * tic54x-opc.c: Add default initializers to avoid warnings.
353 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
354 * arc-ext.c: Likewise.
356 2001-08-28 matthew gren <mrg@redhat.com>
358 * ppc-opc.c (icbt): Order correctly.
360 2001-08-27 David Edelsohn <dje@watson.ibm.com>
361 Torbjorn Granlund <tege@swox.com>
363 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
365 (insert_ds): Complain if not a multiple of 4.
367 (XSYNC_MASK): Define.
368 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
369 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
371 2001-08-26 Andreas Jaeger <aj@suse.de>
373 * h8500-opc.h: Add default initializers to h8500_table to shut up
376 2001-08-25 Andreas Jaeger <aj@suse.de>
378 * tic54x-dis.c: Add unused attributes where needed.
380 * z8k-dis.c (output_instr): Add unused attribute.
382 * h8300-dis.c: Add missing prototypes.
383 (bfd_h8_disassemble): Make static.
385 * cris-dis.c: Add missing prototype.
386 * h8500-dis.c: Likewise.
387 * m68hc11-dis.c: Likewise.
388 * pj-dis.c: Likewise.
389 * tic54x-dis.c: Likewise.
390 * v850-dis.c: Likewise.
391 * vax-dis.c: Likewise.
392 * w65-dis.c: Likewise.
393 * z8k-dis.c: Likewise.
395 * d10v-dis.c: Add missing prototype.
396 (dis_long): Remove unused variable.
397 (dis_2_short): Likewise.
399 * sh-dis.c: Add missing prototypes.
400 * v850-opc.c: Likewise.
401 Add unused attributes where needed.
403 * ns32k-dis.c: Add missing prototypes.
404 (bit_extract_simple): Remove unused variable.
406 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
408 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
409 branch instructions for gcc 3.0.
410 * opcodes/s390-opc.txt: Likewise.
412 2001-08-21 Andreas Jaeger <aj@suse.de>
414 * i960-dis.c: Add parameters for prototypes
415 (ctrl): Add unused attributes.
419 * mips-dis.c: Add missing prototypes.
420 * a29k-dis.c: Likewise.
421 * arc-dis.c: Likewise.
422 * ia64-opc.c: Likewise.
424 * s390-dis.c: Add missing prototypes.
425 (init_disasm): Remove unused attribute since the parameter is
428 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
430 * mips-opc.c (M1): Define. Reformatted Code.
431 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
434 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
436 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
437 the corresponding non-likely insn is in MIPS I.
439 2001-08-13 Kazu Hirata <kazu@hxi.com>
441 * mcore-dis.c: Fix formatting.
442 * mips-dis.c: Likewise.
443 * pj-dis.c: Likewise.
444 * z8k-dis.c: Likewise.
446 2001-08-12 Richard Henderson <rth@redhat.com>
448 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
449 to *VALUEP. Regenerate all cgen files.
451 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
453 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
455 * mips-opc.c (G6): Undefine.
456 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
457 as the first "move" alternative.
459 2001-08-10 Andreas Jaeger <aj@suse.de>
461 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
463 * configure: Regenerate.
465 2001-08-10 Alan Modra <amodra@bigpond.net.au>
467 * ppc-opc.c: Revert 2001-08-08.
469 2001-08-09 Alan Modra <amodra@bigpond.net.au>
471 * dis-buf.c (generic_strcat_address): Add missing prototype.
472 #if 0 the functions as it is unused.
474 2001-08-08 Alan Modra <amodra@bigpond.net.au>
476 1999-10-25 Torbjorn Granlund <tege@swox.com>
477 * ppc-opc.c: Include "bfd.h".
478 (powerpc_operands): Add new field for reloc type.
480 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
482 * mips-dis.c (print_insn_arg): Don't use software integer registers
483 for coprocessor registers.
484 (get_mips_isa): Removed.
485 (is_newabi): New function, checks if NewABI is used.
486 (_print_insn_mips): Get distinction between old ABI and new ABI right.
488 2001-08-01 Christian Groessler <cpg@aladdin.de>
490 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
491 get stderr definition.
492 (internal, gas): Removed warnings.
493 (gas): Create a correct final entry for created array.
494 * z8k-opc.h: Recreated with new z8kgen.
496 2001-07-28 Kazu Hirata <kazu@hxi.com>
498 * i386-dis.c: Fix formatting.
500 2001-07-28 Matthias Kramm <kramm@quiss.org>
502 * i386-dis.c: Change formatting conventions for architecture
503 i386:intel to better match the format of various intel i386
504 assemblers, like nasm, tasm or masm.
506 2001-07-24 Alan Modra <amodra@bigpond.net.au>
508 * Makefile.am: Update dependencies with "make dep-am".
509 * Makefile.in: Regenerate
511 2001-07-24 Kazu Hirata <kazu@hxi.com>
513 * alpha-dis.c: Fix formatting.
514 * cris-dis.c: Likewise.
515 * d10v-dis.c: Likewise.
516 * d30v-dis.c: Likewise.
517 * m10300-dis.c: Likewise.
518 * tic54x-dis.c: Likewise.
520 2001-07-23 Kazu Hirata <kazu@hxi.com>
522 * m68k-dis.c: Fix formatting.
523 * pj-dis.c: Likewise.
524 * s390-dis.c: Likewise.
525 * z8k-dis.c: Likewise.
527 2001-07-21 Chris Demetriou <cgd@broadcom.com>
529 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
530 into the rest of the surrounding definitions.
532 2001-07-18 Alan Modra <amodra@bigpond.net.au>
534 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
535 for lgdt, lidt, sgdt, sidt.
537 2001-07-13 Philip Blundell <philb@gnu.org>
539 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
541 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
543 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
545 (@arch@_cgen_build_insn_regex): New routine from Graydon.
546 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
547 to verify if it is worth parsing the insn as insn "x". Also update
548 error message when insn is not a recognized format of the insn vs
549 when the insn is completely unrecognized.
551 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
553 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
555 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
556 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
558 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
560 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
561 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
562 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
564 2001-07-05 Ben Elliston <bje@redhat.com>
566 * Makefile.am (CPUDIR): Define.
567 (stamp-m32r): Update dependencies.
569 (stamp-openrisc): Ditto.
570 * Makefile.in: Regenerate.
572 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
574 * ppc-opc.c: Fix encoding of 'clf' instruction.
576 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
578 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
580 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
582 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
583 * cgen-opc.c (cgen_keyword_add): Ignore special first
584 character when building nonalpha_chars field.
586 2001-06-24 Ben Elliston <bje@redhat.com>
588 * m88k-dis.c: Format to conform to GNU coding standards.
590 2001-06-23 Andreas Jaeger <aj@suse.de>
592 * disassemble.c (disassembler_usage): Add unused attribute.
594 2001-06-22 Eric Christopher <echristo@redhat.com>
596 * mips-opc.c: Move prefx to start of the table.
598 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
600 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
603 2001-06-22 Pauli <pauli@moreton.com.au>
605 * m68k-opc.c: Add wdebug instruction.
607 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
609 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
611 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
613 * cgen-asm.c (cgen_parse_keyword): When looking for the
614 boundaries of a keyword, allow any special characters
615 that are actually in one of the allowed keyword.
616 * cgen-opc.c (cgen_keyword_add): Add any special characters
617 to the nonalpha_chars field.
619 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
621 * s390-opc.c: Add lgh instruction.
622 * s390-opc.txt: Likewise.
624 2001-06-11 Alan Modra <amodra@bigpond.net.au>
626 * i386-dis.c: Group function prototypes in one place.
627 (FLOATCODE): Redefine as 1.
628 (USE_GROUPS): Redefine as 2.
629 (USE_PREFIX_USER_TABLE): Redefine as 3.
630 (X86_64_SPECIAL): Define as 4.
631 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
632 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
633 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
634 (dis386): New table combining above four tables.
635 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
636 (dis386_twobyte): New table combining above two tables.
637 (x86_64_table): New table to handle x86_64.
639 (float_mem_att, float_mem_intel): Delet.
640 (float_mem): New table combining above two tables.
641 (print_insn_i386): Modify for above.
643 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
644 Return 0 on success, 1 if no valid alternative.
645 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
646 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
647 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
648 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
650 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
651 (OP_I64): If not 64-bit mode, call OP_I.
652 OP_OFF64): If not 64-bit mode, call OP_OFF.
653 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
654 'ignore'/'ignored' to 'bytemode'.
656 2001-06-10 Alan Modra <amodra@bigpond.net.au>
658 * configure.in: Sort 'ta' case statement.
659 * configure: Regenerate.
661 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
663 (disx86_64_att): Likewise.
664 (dis386_twobyte_att): Likewise.
665 (print_insn_i386): Don't print branch hints as a prefix.
666 (putop): 'H' macro prints branch hints.
667 (get64): Kill compile warnings.
669 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
671 * sh-opc.h (sh_table): Don't use empty initializers.
673 2001-06-06 Christian Groessler <cpg@aladdin.de>
675 * z8k-dis.c: Fix formatting.
676 (unpack_instr): Remove unused cases in switch statement. Add
677 safety abort() in default case.
678 (unparse_instr): Add safety abort() in default case.
680 2001-06-06 Peter Jakubek <pjak@snafu.de>
682 * m68k-dis.c (print_insn_m68k): Fix typo.
683 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
684 mcf (ColdFire) div, rem and moveb instructions.
686 2001-06-06 Alan Modra <amodra@bigpond.net.au>
688 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
689 (cond_jump_mode, loop_jcxz_mode): Define.
690 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
691 appropriate, and 'F' suffix to loop insns.
692 (disx86_64_att): Likewise.
693 (dis386_twobyte_att): Likewise.
694 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
695 Output data size prefix for long conditional jumps. Output cs and
697 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
698 (OP_J): Don't make PREFIX_DATA used.
700 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
702 * sh-opc.h (sh_table): Complete last element entry to avoid
705 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
707 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
709 2001-05-23 Alan Modra <amodra@one.net.au>
711 * arc-opc.c: Whitespace changes.
713 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
715 * cris-opc.c (cris_spec_regs): Add missing initializer field for
718 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
720 * cgen-dis.in (extract_normal): Complete support for min<base case.
722 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
724 * mips-dis.c (INSNLEN): Rename MAXLEN.
725 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
726 (print_insn_arg): Remove $ prefix of register names.
727 (set_mips_isa_type): Remove.
728 (mips_isa_type): New function.
729 (get_mips_isa): New Function.
730 (print_insn_mips): Rename _print_insn_mips.
731 (_print_insn_mips): New function, contains code which was
732 duplicated in print_insn_big_mips and print_insn_little_mips.
733 (print_insn_big_mips): Moved code to _print_insn_mips.
734 (print_insn_little_mips): Likewise.
735 (print_mips16_insn_arg): Remove $ prefix of register names.
736 Print error message before abort.
738 2001-05-14 J.T. Conklin <jtc@redback.com>
740 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
741 simplified mnemonics used for setting PPC750-specific special
744 2001-05-12 H.J. Lu <hjl@gnu.org>
746 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
749 2001-05-12 Peter Targett <peter.targett@arccores.com>
751 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
752 register to r/w. Formatting fixes throughout file.
754 2001-05-12 Alan Modra <amodra@one.net.au>
756 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
758 (twobyte_has_modrm): Update table.
759 (need_modrm): Give it file scope.
760 (MODRM_CHECK): Define.
761 (dofloat): Use MODRM_CHECK.
766 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
768 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
769 even at end of a section.
770 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
771 by ignoring precariously-unpacked insn_value in favor of raw buffer.
773 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
775 * disassemble.c (disassembler_usage): Remove unused attribute.
777 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
779 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
781 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
783 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
784 assume incoming buffer already has the base insn loaded. Handle
785 smaller-than-base instructions for variable-length case.
787 2001-05-04 Alan Modra <amodra@one.net.au>
789 * i386-dis.c (Ev, Ed): Remove duplicate define.
792 (OP_XS): New function.
793 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
795 (dis386_twobyte_intel): Likewise.
796 (prefix_user_table): Use MS for maskmovq operand.
798 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
800 * Makefile.am: Add OpenRISC target.
801 * Makefile.in: Regenerated.
803 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
805 * configure.in (bfd_openrisc_arch): Add target.
806 * configure: Regenerated.
808 * openrisc-asm.c: New file.
809 * openrisc-desc.c: Likewise.
810 * openrisc-desc.h: Likewise.
811 * openrisc-dis.c: Likewise.
812 * openrisc-ibld.c: Likewise.
813 * openrisc-opc.c: Likewise.
814 * openrisc-opc.h: Likewise.
816 2001-04-24 Christian Groessler <cpg@aladdin.de>
818 * z8k-dis.c: add names of control registers (ctrl_names);
819 (seg_length): provides instruction length fixup for segmented
820 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
821 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
822 (unparse_intr): handle CLASS_PR, print addresses without '#'
823 * z8k-opc.h: re-created with new z8kgen
824 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
825 entries for ldctl/ldctlb instruction
827 2001-04-06 Andreas Jaeger <aj@suse.de>
829 * i386-dis.c: Add ffreep instruction.
831 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
833 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
835 2001-03-24 Alan Modra <alan@linuxcare.com.au>
837 * i386-dis.c (PREGRP25): Define.
838 (dis386_twobyte_att): Use here in place of "movntq" entry.
839 (dis386_twobyte_intel): Likewise.
840 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
842 (dis386_twobyte_att): Use here.
843 (dis386_twobyte_intel): Likewise.
844 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
845 (prefix_user_table <maskmovdqu>): XM operand, not MX.
846 (prefix_user_table): Cosmetic changes to "bad" entries.
848 2001-03-23 Nick Clifton <nickc@redhat.com>
850 * mips-opc.c: Remove extraneous whitespace.
851 * mips-dis.c: Remove extraneous whitespace.
853 2001-03-22 Ben Elliston <bje@redhat.com>
855 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
856 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
857 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
858 to allay a compiler warning.
860 2001-03-22 Alan Modra <alan@linuxcare.com.au>
862 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
863 (dis386_twobyte_intel): Likewise.
864 (twobyte_has_modrm): Set entry for paddq, psubq.
866 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
868 * cgen-dis.in (print_insn_@arch@): Add support for target machine
869 determination via CGEN_COMPUTE_MACH.
870 * fr30-desc.c: Regenerate.
871 * fr30-dis.c: Regenerate.
872 * fr30-opc.h: Regenerate.
873 * m32r-desc.c: Regenerate.
874 * m32r-dis.c: Regenerate.
875 * m32r-opc.h: Regenerate.
876 * m32r-opinst.c: Regenerate.
878 2001-03-20 H.J. Lu <hjl@gnu.org>
880 * configure.in: Remove the redundent AC_ARG_PROGRAM.
881 * configure: Rebuild.
883 2001-03-19 Jim Wilson <wilson@redhat.com>
885 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
886 notestr if larger than xsect.
887 (in_class): Handle format M5.
888 * ia64-asmtab.c: Regnerate.
890 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
892 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
893 has more than one byte left to read.
895 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
897 * s390-opc.c: Add new opcodes. Smooth out formatting.
898 * s390-opc.txt: Add new opcodes.
900 2001-03-06 Nick Clifton <nickc@redhat.com>
902 * arm-dis.c (print_insn_thumb): Compute destination address
903 of BLX(1) instruction by taking bit 1 from PC and not from bit
906 2001-03-06 Igor Shevlyakov <igor@windriver.com>
908 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
909 so command line switches will work.
911 2001-03-05 Dave Brolley <brolley@redhat.com>
913 * fr30-asm.c: Regenerate.
914 * fr30-desc.c: Regenerate.
915 * fr30-desc.h: Regenerate.
916 * fr30-dis.c: Regenerate.
917 * fr30-ibld.c: Regenerate.
918 * fr30-opc.c: Regenerate.
919 * fr30-opc.h: Regenerate.
920 * m32r-asm.c: Regenerate.
921 * m32r-desc.c: Regenerate.
922 * m32r-desc.h: Regenerate.
923 * m32r-dis.c: Regenerate.
924 * m32r-ibld.c: Regenerate.
925 * m32r-opc.c: Regenerate.
926 * m32r-opc.h: Regenerate.
927 * m32r-opinst.c: Regenerate.
929 2001-02-28 Igor Shevlyakov <igor@windriver.com>
931 * m68k-opc.c: fix cpushl according to Motorola. Enable
932 bunch of instructions for Coldfire 5407 and add all new.
934 2001-02-27 Alan Modra <alan@linuxcare.com.au>
936 * configure.in (BFD_VERSION): Do without grep.
937 * configure: Regenerate.
938 * Makefile.am: Run "make dep-am".
939 * Makefile.in: Regenerate.
941 2001-02-23 David Mosberger <davidm@hpl.hp.com>
943 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
944 * ia64-asmtab.c: Regenerate.
946 2001-02-21 David Mosberger <davidm@hpl.hp.com>
948 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
949 separate variants: one for IMM22 and the other for IMM14.
950 * ia64-asmtab.c: Regenerate.
952 2001-02-21 Greg McGary <greg@mcgary.org>
954 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
956 2001-02-20 H.J. Lu <hjl@gnu.org>
958 * Makefile.am (ia64-ic.tbl): Remove the target.
959 (ia64-raw.tbl): Likewise.
960 (ia64-waw.tbl): Likewise.
961 (ia64-war.tbl): Likewise.
962 (ia64-asmtab.c): Generate it in the source directory.
963 * Makefile.in: Regenerated.
965 2001-02-18 lars brinkhoff <lars@nocrew.org>
967 * Makefile.am: Add PDP-11 target.
968 * configure.in: Likewise.
969 * disassemble.c: Likewise.
970 * pdp11-dis.c: New file.
971 * pdp11-opc.c: New file.
973 2001-02-14 Jim Wilson <wilson@redhat.com>
975 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
976 * ia64-asmtab.c: Regenerate.
978 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
980 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
984 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
986 * mips-dis.c (print_insn_arg): Use top four bits of the address of
987 the following instruction not of the jump itself for the jump
989 (print_mips16_insn_arg): Likewise.
991 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
993 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
995 * Makefile.in: Regenerate.
997 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
999 * Makefile.am: Add linux target for S/390.
1000 * Makefile.in: Likewise.
1001 * configure.in: Likewise.
1002 * disassemble.c: Likewise.
1003 * s390-dis.c: New file.
1004 * s390-mkopc.c: New file.
1005 * s390-opc.c: New file.
1006 * s390-opc.txt: New file.
1008 2001-02-05 Jim Wilson <wilson@redhat.com>
1010 * ia64-asmtab.c: Revert 2000-12-16 change.
1012 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1014 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1015 * m32r-desc.h: Regenerate.
1017 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1019 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1020 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1022 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1024 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1026 2001-01-13 Nick Clifton <nickc@redhat.com>
1028 * disassemble.c: Remove spurious white space.
1030 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1032 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1035 2001-01-11 Peter Targett <peter.targett@arccores.com>
1037 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1038 * Makefile.am (C_FILES): Add arc-ext.c.
1039 (ALL_MACHINES) Add arc-ext.lo.
1040 (INCLUDES) Add opcode directory to list.
1041 New dependency entry for arc-ext.lo.
1042 * disassemble.c (disassembler): Correct call to
1043 arc_get_disassembler.
1044 * arc-opc.c: New update for ARC, including full base
1045 instructions for ARC variants.
1046 * arc-dis.h, arc-dis.c: New update for ARC, including
1047 extensibility functionality.
1048 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1050 2001-01-10 Jan Hubicka <jh@suse.cz>
1052 * i386-dis.c (PREGRP15 - PREGRP24): New.
1053 (dis386_twobyt): Add SSE2 instructions.
1054 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1055 (twobyte_uses_f3_prefix): ... this one.
1056 (grps): Add SSE instructions.
1057 (prefix_user_table): Add two new slots; add SSE2 instructions.
1058 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1059 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1060 to prefix_user_table.
1061 (OP_E): Accept mfence and lfence as well.
1062 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1063 (OP_XMM): Support REX extensions.
1067 2001-01-09 Nick Clifton <nickc@redhat.com>
1069 * arm-dis.c (print_insn): Set pc to zero for instructions with
1070 a reloc associated with them.
1072 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1074 * cgen-asm.in (parse_insn_normal): Changed syn to be
1075 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1076 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1077 to '\0' to use 0 instead.
1078 * cgen-dis.in (print_insn_normal): Ditto.
1079 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1081 2001-01-05 Jan Hubicka <jh@suse.cz>
1083 * i386-dis.c: Add x86_64 support.
1084 (rex): New static variable.
1085 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1086 (USED_REX): New macro.
1087 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1088 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1089 (OP_REG, OP_OFF): Declare.
1090 (get64, get32, get32s): New functions.
1091 (r??_reg): New constants.
1092 (dis386_att): Change templates of instruction implicitly promoted
1093 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1095 (dis386_intel): Likewise.
1096 (dixx86_64_att): New table based on dis386_att.
1097 (dixx86_64_intel): New table based on dis386_intel.
1098 (names64, names8rex): New global variable.
1099 (names32, names16): Add extended registers.
1100 (prefix_user_t): Recognize rex prefixes.
1101 (prefix_name): Print REX prefixes nicely.
1102 (op_riprel): New global variable.
1103 (start_pc): Set type to bfd_vma.
1104 (print_insn_i386): Detect the 64bit mode and use proper table;
1105 move ckprefix after initializing the buffer; output unused rex prefixes;
1106 output information about target of RIP relative addresses.
1107 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1108 (print_operand_value): New function.
1109 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1110 REX prefix and new modes.
1111 (get64, get32s): New.
1112 (get32): Return bfd_signed_vma type.
1113 (set_op): Initialize the op_riprel.
1114 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1116 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1118 cgen-dis.in (read_insn): Use bfd_get_bits()
1120 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1122 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1123 (hash_insn_list): Likewise
1124 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1125 (extract_1): Use bfd_get_bits().
1126 (extract_normal): Apply sign extension to both extraction
1128 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1129 (cgen_put_insn_value): Use bfd_put_bits()
1131 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1133 * cgen-asm.in (parse_insn_normal): Print better error message for
1134 instructions with missing operands.
1136 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1138 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1140 2000-12-16 Nick Clifton <nickc@redhat.com>
1142 * Makefile.in: Regenerate.
1143 * aclocal.m4: Regenerate.
1144 * config.in: Regenerate.
1145 * configure.in: Add spacing.
1146 * configure: Regenerate.
1147 * ia64-asmtab.c: Regenerate.
1148 * po/opcodes.pot: Regenerate.
1150 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1152 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1153 error messages over later parse-time ones.
1155 2000-12-12 Jim Wilson <wilson@redhat.com>
1157 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1159 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1160 (print_dependency_table): Print NULL if semantics field not set.
1161 (insert_opcode_dependencies): Mark cmp parameter as unused.
1162 (print_main_table): Use fprintf_vma to print long long fields.
1163 (main): Mark argv paramter as unused. Convert to old style definition.
1164 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1165 * ia64-asmtab.c: Regnerate.
1167 2000-12-09 Nick Clifton <nickc@redhat.com>
1169 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1172 * fr30-dis.c: Regenerate.
1174 2000-12-08 Peter Targett <peter.targett@arccores.com>
1176 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1177 * Makefile.am (C_FILES): Add arc-ext.c.
1178 (ALL_MACHINES) Add arc-ext.lo.
1179 (INCLUDES) Add opcode directory to list.
1180 New dependency entry for arc-ext.lo.
1181 * disassemble.c (disassembler): Correct call to
1182 arc_get_disassembler.
1183 * arc-opc.c: New update for ARC, including full base
1184 instructions for ARC variants.
1185 * arc-dis.h, arc-dis.c: New update for ARC, including
1186 extensibility functionality.
1187 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1189 2000-12-03 Chris Demetriou cgd@sibyte.com
1191 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1192 MOD_HILO, and MOD_LO macros.
1194 * mips-opc.c (M1, M2): Delete.
1195 (mips_builtin_opcodes): Remove all uses of M1.
1197 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1198 instructions take "G" format second operands and use the
1200 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1202 Delete "sel" code operands from mfc1 and mtc1.
1203 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1206 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1207 Chris Demetriou cgd@sibyte.com
1209 * mips-opc.c (mips_builtin_opcodes): Finish additions
1210 for MIPS32 support, and clean up existing entries for
1211 aesthetics, consistency with the MIPS32 ISA, and
1212 with consistency the rest of the table.
1214 2000-12-01 Nick Clifton <nickc@redhat.com>
1216 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1219 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1221 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1222 specifiers. Update 'B' for new constant names, and remove
1224 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1225 near the top of the array, so they are disassembled properly.
1226 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1227 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1228 specifier. Add 'H' format specifier variants for "mfc1,"
1229 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1230 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1231 "wait" variant which uses 'J' operand specifier.
1233 * mips-dis.c (set_mips_isa_type): Update to use
1234 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1235 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1236 * mips-opc.c (I32): New constant for instructions added in
1239 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1241 * mips-dis.c (set_mips_isa_type): Add cases for
1242 bfd_mach_mips5 and bfd_mach_mips64.
1243 * mips-opc.c (I64): New definitions.
1245 * mips-dis.c (set_mips_isa_type): Add case for
1248 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1250 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1251 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1252 Initialize variable dc to NULL.
1253 (print_insn_shx): Remove unused label d_reg_n.
1255 2000-11-24 Nick Clifton <nickc@redhat.com>
1257 * arm-opc.h: Add new opcode formatting parameter 'B'.
1258 (arm_opcodes): Add XScale, v5, and v5te instructions.
1259 (thumb_opcodes): Add v5t instructions.
1261 * arm-dis.c (print_insn_arm): Handle new 'B' format
1263 (print_insn_thumb): Decode BLX(1) instruction.
1265 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1267 * mips-opc.c: Fix file header comment.
1269 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1271 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1272 print_insn_cris_with_register_prefix.
1274 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1276 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1278 2000-11-07 Matthew Green <mrg@redhat.com>
1280 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1281 must be loaded there in their entirety.
1283 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1285 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1286 (compute_arch_mask): Add v8plusb and v9b machines.
1287 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1288 * sparc-opc.c: Support for Cheetah instruction set.
1289 (prefetch_table): Add #invalidate.
1291 2000-10-16 Nick Clifton <nickc@redhat.com>
1293 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1295 2000-10-06 Dave Brolley <brolley@redhat.com>
1297 * fr30-desc.h: Regenerate.
1298 * m32r-desc.h: Regenerate.
1299 * m32r-ibld.c: Regenerate.
1301 2000-10-05 Jim Wilson <wilson@redhat.com>
1303 * ia64-ic.tbl: Update from Intel.
1304 * ia64-asmtab.c: Regenerate.
1306 2000-10-04 Kazu Hirata <kazu@hxi.com>
1308 * ia64-gen.c: Convert C++-style comments to C-style comments.
1309 * tic54x-dis.c: Likewise.
1311 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1313 Changes to add dollar prefix to registers for files where user symbols
1314 don't have a leading underscore. Fix formatting.
1315 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1316 (format_reg): Add parameter with_reg_prefix. All callers changed.
1317 (print_with_operands): Ditto.
1318 (print_insn_cris_generic): Renamed from print_insn_cris, add
1319 parameter with_reg_prefix.
1320 (print_insn_cris_with_register_prefix,
1321 print_insn_cris_without_register_prefix, cris_get_disassembler):
1323 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1325 2000-09-22 Jim Wilson <wilson@redhat.com>
1327 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1328 gt, ge, ngt, and nge.
1329 * ia64-asmtab.c: Regenerate.
1331 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1332 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1333 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1334 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1335 * ia64-asmtab.c: Regnerate.
1337 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1339 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1340 Add mfc0 and mtc0 with sub-selection values.
1341 Add clo and clz opcodes.
1342 Add msub and msubu instructions for MIPS32.
1343 Add madd/maddu aliases for mad/madu for MIPS32.
1344 Support wait, deret, eret, movn, pref for MIPS32.
1345 Support tlbp, tlbr, tlbwi, tlbwr.
1348 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1349 (print_insn_arg): Handle 'H' args.
1350 (set_mips_isa_type): Recognize 4K.
1351 Use CPU_* defines instead of hardcoded numbers.
1353 2000-09-11 Catherine Moore <clm@redhat.com>
1355 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1356 (d30v_format_tab): Use Rb2 for modinc and moddec.
1358 2000-09-07 Catherine Moore <clm@redhat.com>
1360 * d30v-opc.c (d30v_format_tab): Use format Ra for
1363 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1365 * configure: Rebuilt with new libtool.m4.
1367 2000-09-05 Nick Clifton <nickc@redhat.com>
1369 * configure: Regenerate.
1370 * po/opcodes.pot: Regenerate.
1372 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1374 * acinclude.m4: Include libtool and gettext macros from the
1376 * aclocal.m4, configure: Rebuilt.
1378 2000-08-30 Kazu Hirata <kazu@hxi.com>
1380 * tic80-dis.c: Fix formatting.
1382 2000-08-29 Kazu Hirata <kazu@hxi.com>
1384 * w65-dis.c: Fix formatting.
1386 2000-08-28 Mark Hatle <mhatle@mvista.com>
1388 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1389 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1390 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1391 instructions. Added extended mnemonic mftbl as defined in the
1392 405GP manual for all PPCs.
1394 2000-08-28 Jim Wilson <wilson@redhat.com>
1396 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1397 call. Change last goto to use failed instead of done.
1399 2000-08-28 Dave Brolley <brolley@redhat.com>
1401 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1402 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1403 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1404 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1405 * cgen-dis.in (read_insn): New static function.
1406 (print_insn): Use read_insn to read the insn into the buffer and set
1408 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1410 * fr30-asm.c: Regenerated.
1411 * fr30-desc.c: Regenerated.
1412 * fr30-desc.h: Regenerated.
1413 * fr30-dis.c: Regenerated.
1414 * fr30-ibld.c: Regenerated.
1415 * fr30-opc.c: Regenerated.
1416 * fr30-opc.h: Regenerated.
1417 * m32r-asm.c: Regenerated.
1418 * m32r-desc.c: Regenerated.
1419 * m32r-desc.h: Regenerated.
1420 * m32r-dis.c: Regenerated.
1421 * m32r-ibld.c: Regenerated.
1422 * m32r-opc.c: Regenerated.
1424 2000-08-28 Kazu Hirata <kazu@hxi.com>
1426 * tic30-dis.c: Fix formatting.
1428 2000-08-27 Kazu Hirata <kazu@hxi.com>
1430 * sh-dis.c: Fix formatting.
1432 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1434 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1436 2000-08-24 Kazu Hirata <kazu@hxi.com>
1438 * z8k-dis.c: Fix formatting.
1440 2000-08-16 Jim Wilson <wilson@redhat.com>
1442 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1443 break, mov-immediate, nop.
1444 * ia64-opc-f.c: Delete fpsub instructions.
1445 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1446 address operand. Rewrite using macros to avoid long lines.
1447 * ia64-opc.h (POSTINC): Define.
1448 * ia64-asmtab.c: Regenerate.
1450 2000-08-15 Jim Wilson <wilson@redhat.com>
1452 * ia64-ic.tbl: Add missing entries.
1454 2000-08-08 Jason Eckhardt <jle@redhat.com>
1456 * i860-dis.c (print_br_address): Change third argument from int
1459 2000-08-07 Richard Henderson <rth@redhat.com>
1461 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1462 for MLI templates. Handle IA64_OPND_TGT64.
1464 2000-08-04 Ben Elliston <bje@redhat.com>
1466 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1467 * cgen.sh: Likewise.
1469 2000-08-02 Jim Wilson <wilson@redhat.com>
1471 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1473 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1475 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1476 Change return type from void to int. Check the combination
1477 of operands, return 1 if valid. Fix to avoid BUF overflow.
1478 Report undefined combinations of operands in COMMENT.
1479 Report internal errors to stderr. Output the adiw/sbiw
1480 constant operand in both decimal and hex.
1481 (print_insn_avr): Disassemble ldd/std with displacement of 0
1482 as ld/st. Check avr_operand () return value, handle invalid
1483 combinations of operands like unknown opcodes.
1485 2000-07-28 Ben Elliston <bje@redhat.com>
1487 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1488 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1489 * Makefile.in: Regenerate.
1490 * configure.in: Add --enable-cgen-maint option.
1491 * configure: Regenerate.
1493 2000-07-26 Dave Brolley <brolley@redhat.com>
1495 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1496 (cgen_hw_lookup_by_num): Ditto.
1497 (cgen_operand_lookup_by_name): Ditto.
1498 (print_address): Ditto.
1499 (print_keyword): Ditto.
1500 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1502 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1504 (cgen_parse_keyword): Ditto.
1506 2000-07-22 Jason Eckhardt <jle@redhat.com>
1508 * i860-dis.c: New file.
1509 (print_insn_i860): New function.
1510 (print_br_address): New function.
1511 (sign_extend): New function.
1512 (BITWISE_OP): New macro.
1513 (I860_REG_PREFIX): New macro.
1514 (grnames, frnames, crnames): New structures.
1516 * disassemble.c (ARCH_i860): Define.
1517 (disassembler): Add check for bfd_arch_i860 to set disassemble
1518 function to print_insn_i860.
1520 * Makefile.in (CFILES): Added i860-dis.c.
1521 (ALL_MACHINES): Added i860-dis.lo.
1522 (i860-dis.lo): New dependences.
1524 * configure.in: New bits for bfd_i860_arch.
1526 * configure: Regenerated.
1528 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1530 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1531 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1532 (cris-dis.lo, cris-opc.lo): New rules.
1533 * Makefile.in: Rebuild.
1534 * configure.in (bfd_cris_arch): New target.
1535 * configure: Rebuild.
1536 * disassemble.c (ARCH_cris): Define.
1537 (disassembler): Support ARCH_cris.
1538 * cris-dis.c, cris-opc.c: New files.
1539 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1541 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1543 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1544 Reported by Bill Clarke <llib@computer.org>.
1546 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1548 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1549 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1551 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1553 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1554 fput_const, extract_3, extract_5_load, extract_5_store,
1555 extract_5r_store, extract_5R_store, extract_10U_store,
1556 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1557 extract_12, extract_17, extract_22): Prototype.
1558 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1559 shadowing outer block.
1562 2000-07-05 DJ Delorie <dj@redhat.com>
1566 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1568 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1570 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1572 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1573 marked for translation (exception from the usual coding style).
1574 (print_insn_avr): Initialize insn2 to avoid warnings.
1576 2000-07-03 Kazu Hirata <kazu@hxi.com>
1578 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1579 * h8500-dis.c: Fix formatting.
1581 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1583 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1584 (CLEANFILES): Add DEPA.
1585 * Makefile.in: Regenerate.
1587 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1589 * arm-dis.c (regnames): Add an additional register set to match
1590 the set used by GCC. Make it the default.
1592 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1594 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1596 * Makefile.in: Regenerate.
1598 2000-06-20 H.J. Lu <hjl@gnu.org>
1600 * Makefile.am: Rebuild dependency.
1601 * Makefile.in: Rebuild.
1603 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1605 * Makefile.in, configure: regenerate
1606 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1608 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1610 * configure.in: Recognize m68hc12 and m68hc11.
1611 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1612 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1613 and opcode generation for m68hc11 and m68hc12.
1615 2000-06-16 Nick Duffek <nsd@redhat.com>
1617 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1618 bfd_mach_ppc_620 instead of 620.
1620 2000-06-12 Kazu Hirata <kazu@hxi.com>
1622 * h8300-dis.c: Fix formatting.
1623 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1626 2000-06-09 Denis Chertykov <denisc@overta.ru>
1628 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1630 2000-06-07 Denis Chertykov <denisc@overta.ru>
1632 * avr-dis.c: completely rewritten.
1634 2000-06-02 Kazu Hirata <kazu@hxi.com>
1636 * h8300-dis.c: Follow the GNU coding style.
1637 (bfd_h8_disassemble) Fix a typo.
1639 2000-06-01 Kazu Hirata <kazu@hxi.com>
1641 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1642 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1643 correctly. Fix a typo.
1645 2000-05-31 Nick Clifton <nickc@redhat.com>
1647 * opintl.h (_(String)): Explain why dgettext is used instead of
1650 2000-05-30 Nick Clifton <nickc@redhat.com>
1652 * opintl.h (gettext, dgettext, dcgettext, textdomain,
1653 bindtextdomain): Replace defines with those from intl/libgettext.h
1654 to quieten gcc warnings.
1656 2000-05-26 Alan Modra <alan@linuxcare.com.au>
1658 * Makefile.am: Update dependencies with "make dep-am"
1659 * Makefile.in: Regenerate.
1661 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
1663 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1664 sign-extending operands.
1666 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
1668 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1671 2000-05-21 Nick Clifton <nickc@redhat.com>
1673 * Makefile.am (LIBIBERTY): Define.
1675 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1677 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1678 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1679 (reg_names): Rename to std_reg_names. Change it to a char **
1681 (std_reg_names): New name for reg_names.
1682 (set_mips_isa_type): Set reg_names to point to std_reg_names by
1685 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
1687 * fr30-desc.h: Partially regenerated to account for changed
1688 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1689 * m32r-desc.h: Ditto.
1691 2000-05-15 Nick Clifton <nickc@redhat.com>
1693 * arm-opc.h: Use upper case for flasg in MSR and MRS
1694 instructions. Allow any bit to be set in the field_mask of
1695 the MSR instruction.
1697 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1698 field_mask of an MSR instruction.
1700 2000-05-11 Thomas de Lellis <tdel@windriver.com>
1702 * arm-opc.h: Disassembly of thumb ldsb/ldsh
1703 instructions changed to ldrsb/ldrsh.
1705 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
1707 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1708 target addresses for 'jal' and 'j'.
1710 2000-05-10 Geoff Keating <geoffk@redhat.com>
1712 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1713 also available in common mode when powerpc syntax is being used.
1715 2000-05-08 Alan Modra <alan@linuxcare.com.au>
1717 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1718 (dummy_print_address): Ditto.
1720 2000-05-04 Timothy Wall <twall@redhat.com>
1722 * tic54x-opc.c: New.
1723 * tic54x-dis.c: New.
1724 * disassemble.c (disassembler): Add ARCH_tic54x.
1725 * configure.in: Added tic54x target.
1727 * Makefile.am: Add tic54x dependencies.
1728 * Makefile.in: Ditto.
1730 2000-05-03 J.T. Conklin <jtc@redback.com>
1732 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1733 vector unit operands.
1734 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1735 unit instruction formats.
1736 (PPCVEC): New macro, mask for vector instructions.
1737 (powerpc_operands): Add table entries for above operand types.
1738 (powerpc_opcodes): Add table entries for vector instructions.
1740 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1741 (print_insn_little_powerpc): Likewise.
1742 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1744 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1746 * configure.in: Add bfd_powerpc_64_arch.
1747 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1750 2000-04-24 Nick Clifton <nickc@redhat.com>
1752 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1755 2000-04-23 Denis Chertykov <denisc@overta.ru>
1757 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1759 (reg_fmul_r): New. Extract source register from FMUL instruction.
1760 (reg_muls_d): New. Extract destination register from MULS instruction.
1761 (reg_muls_r): New. Extract source register from MULS instruction.
1762 (reg_movw_d): New. Extract destination register from MOVW instruction.
1763 (reg_movw_r): New. Extract source register from MOVW instruction.
1764 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1765 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1767 2000-04-22 Timothy Wall <twall@redhat.com>
1769 * ia64-gen.c (general): Add an ordered table of primary
1770 opcode names, as well as priority fields to disassembly data
1771 structures to enforce a preferred disassembly format based on the
1772 ordering of the opcode tables.
1773 (load_insn_classes): Show a useful message if IC tables are missing.
1774 (load_depfile): Ditto.
1775 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1776 distinguish preferred disassembly.
1777 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1778 format. Fix incorrect flag on fma.s/fma.s.s0.
1779 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1780 the highest priority.
1781 * ia64-opc-b.c: Use more abbreviations.
1782 * ia64-asmtab.c: Regenerate.
1784 2000-04-21 Jason Eckhardt <jle@redhat.com>
1786 * hppa-dis.c (extract_16): New function.
1787 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1788 new operand types l,y,&,fe,fE,fx.
1790 2000-04-21 Richard Henderson <rth@redhat.com>
1791 David Mosberger <davidm@hpl.hp.com>
1792 Timothy Wall <twall@redhat.com>
1793 Bob Manson <manson@charmed.cygnus.com>
1794 Jim Wilson <wilson@redhat.com>
1796 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1797 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1798 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1800 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1801 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1802 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1803 * Makefile.in: Rebuild.
1804 * configure Rebuild.
1805 * configure.in (bfd_ia64_arch): New target.
1806 * disassemble.c (ARCH_ia64): Define.
1807 (disassembler): Support ARCH_ia64.
1808 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1809 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1810 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1811 ia64-war.tbl, ia64-waw.tbl: New files.
1813 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1815 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1816 (disassemble): Use them.
1818 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1820 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1821 * Makefile.am: Update dependencies.
1822 * Makefile.in: Regenerate.
1824 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1826 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1827 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1828 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1829 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1830 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1831 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1832 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1833 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1834 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1835 ansidecl.h as sysdep.h includes it.
1837 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1839 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1840 --enable-build-warnings option.
1841 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1842 * Makefile.in, configure: Re-generate.
1844 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1846 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1847 stc GBR,@-<REG_N> is available for arch_sh1_up.
1848 Group parallel processing insn with identical mnemonics together.
1849 Make three-operand psha / pshl come first.
1851 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1853 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1854 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1855 (sh_arg_type): Add A_PC.
1856 (sh_table): Update entries using immediates. Add repeat.
1857 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1858 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1860 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1862 * po/opcodes.pot: Regenerate.
1864 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1865 (DEP): Quote when passing vars to sub-make. Add warning message
1867 (DEP1): Rewrite for "gcc -MM".
1868 (CLEANFILES): Add DEP2.
1869 Update dependencies.
1870 * Makefile.in: Regenerate.
1872 2000-04-03 Denis Chertykov <denisc@overta.ru>
1874 * avr-dis.c: Syntax cleanup.
1875 (add0fff): Print the pc relative address as a signed number.
1876 (add03f8): Likewise.
1878 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1880 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1881 the parameter ATTRIBUTE_UNUSED.
1882 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1884 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1886 * m10300-opc.c: SP-based offsets are always unsigned.
1888 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1890 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1891 [branch always] instead of "undefined".
1893 2000-03-27 Nick Clifton <nickc@redhat.com>
1895 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1896 short instructions, from end of list of long instructions.
1898 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1900 * Makefile.am (CFILES): Add avr-dis.c.
1901 (ALL_MACHINES): Add avr-dis.lo.
1903 2000-03-27 Alan Modra <alan@linuxcare.com>
1905 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1907 (print_insn_avr): Call function via pointer in K&R compatible way.
1908 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1909 add0fff, add03f8): Convert to old style function declaration and
1911 (avrdis_opcode): Add prototype.
1913 2000-03-27 Denis Chertykov <denisc@overta.ru>
1915 * avr-dis.c: New file. AVR disassembler.
1916 * configure.in (bfd_avr_arch): New architecture support.
1917 * disassemble.c: Likewise.
1918 * configure: Regenerate.
1920 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1922 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1924 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1926 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1927 flag to determine if operand is pc-relative.
1929 (d30v_format_table):
1930 (REL6S3): Renamed from IMM6S3.
1931 Added flag OPERAND_PCREL.
1932 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1933 added flag OPERAND_PCREL.
1934 (IMM12S3U): Replaced with REL12S3.
1935 (SHORT_D2, LONG_D): Delay target is pc-relative.
1936 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1937 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1938 using the REL* operands.
1939 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1940 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1941 LONG_Db, using REL* operands.
1942 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1943 (d30v_opcode_table): Use new *r formats.
1945 2000-02-28 Nick Clifton <nickc@redhat.com>
1947 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1948 'signed_overflow_ok_p'.
1950 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1952 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1953 name of the libtool directory.
1954 * Makefile.in: Rebuild.
1956 2000-02-24 Nick Clifton <nickc@redhat.com>
1958 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1959 (cgen_clear_signed_overflow_ok): New function.
1960 (cgen_signed_overflow_ok_p): New function.
1962 2000-02-23 Andrew Haley <aph@redhat.com>
1964 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1965 m32r-ibld.c, m32r-opc.h: Rebuild.
1967 2000-02-23 Linas Vepstas <linas@linas.org>
1969 * i370-dis.c, i370-opc.c: New.
1971 * disassemble.c (ARCH_i370): Define.
1972 (disassembler): Handle it.
1974 * Makefile.am: Add support for Linux/IBM 370.
1975 * configure.in: Likewise.
1977 * Makefile.in: Regenerate.
1978 * configure: Likewise.
1980 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1982 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1983 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1986 2000-02-22 Andrew Haley <aph@redhat.com>
1988 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1990 * mips-opc.c (G6): New define.
1991 (mips_builtin_op): Add "move" definition for -gp32.
1993 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1995 From Grant Erickson <gerickso@Brocade.COM>:
1996 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1998 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2000 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2003 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2005 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2006 (print_insn_ppi): Likewise.
2007 (print_insn_shx): Use info->mach to select appropriate insn set.
2008 Add support for sh-dsp. Remove FD_REG_N support.
2009 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2010 (sh_arg_type): Likewise. Remove FD_REG_N.
2011 (sh_dsp_reg_nums): New enum.
2012 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2013 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2014 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2015 (arch_sh3_dsp_up): Likewise.
2016 (sh_opcode_info): New field: arch.
2017 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2018 D_REG_N. Fill in arch field. Add sh-dsp insns.
2020 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2022 * arm-dis.c: Change flavor name from atpcs-special to
2023 special-atpcs to prevent name conflict in gdb.
2024 (get_arm_regname_num_options, set_arm_regname_option,
2025 get_arm_regnames): New functions. API to access the several
2026 flavor of register names. Note: Used by gdb.
2027 (print_insn_thumb): Use the register name entry from the currently
2028 selected flavor for LR and PC.
2030 2000-02-10 Nick Clifton <nickc@redhat.com>
2032 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2034 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2035 "mulsh.h" instructions.
2036 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2038 (print_insn_mcore): Add support for little endian targets.
2039 Add support for MULSH and OPSR classes.
2041 2000-02-07 Nick Clifton <nickc@redhat.com>
2043 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2044 Previous delat did not take.
2046 2000-02-03 Timothy Wall <twall@redhat.com>
2048 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2049 to adjust target address bounds checking and calculate the
2050 appropriate octet offset into data.
2052 2000-01-27 Nick Clifton <nickc@redhat.com>
2054 * arm-dis.c: (parse_disassembler_option): Rename to
2055 parse_arm_disassembler_option and allow to be exported.
2057 * disassemble.c (disassembler_usage): New function: Print out any
2058 target specific disassembler options.
2059 Call arm_disassembler_options() if the ARM architecture is being
2062 * arm-dis.c (NUM_ELEM): Define this macro if not already
2064 (arm_regname): New struct type for ARM register names.
2065 (arm_toggle_regnames): Delete.
2066 (parse_disassembler_option): Use register name structure.
2067 (print_insn): New function: Combines duplicate code found in
2068 print_insn_big_arm and print_insn_little_arm.
2069 (print_insn_big_arm): Call print_insn.
2070 (print_insn_little_arm): Call print_insn.
2071 (print_arm_disassembler_options): Display list of supported,
2072 ARM specific disassembler options.
2074 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2076 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2077 ARM_STT_16BIT flag as Thumb code symbols.
2079 * arm-dis.c (printf_insn_little_arm): Ditto.
2081 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2083 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2084 of raw thumb instructions.
2086 2000-01-20 Nick Clifton <nickc@redhat.com>
2088 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2090 2000-01-03 Nick Clifton <nickc@cygnus.com>
2092 * arm-dis.c (streq): New macro.
2093 (strneq): New macro.
2094 (force_thumb): ew local variable.
2095 (parse_disassembler_option): New function: Parse a single, ARM
2096 specific disassembler command line switch.
2097 (parse_disassembler_option): Call parse_disassembler_option to
2098 parse individual command line switches.
2099 (print_insn_big_arm): Check force_thumb.
2100 (print_insn_little_arm): Check force_thumb.
2102 For older changes see ChangeLog-9899
2108 version-control: never