1 2008-05-22 H.J. Lu <hongjiu.lu@intel.com>
4 * i386-opc.tbl: Break cvtsi2ss/cvtsi2sd/vcvtsi2sd/vcvtsi2ss
5 into 32bit and 64bit. Remove Reg64|Qword and add
6 IgnoreSize|No_qSuf on 32bit version.
7 * i386-tbl.h: Regenerated.
9 2008-05-21 H.J. Lu <hongjiu.lu@intel.com>
11 * i386-opc.tbl: Add NoAVX to movdq2q and movq2dq.
12 * i386-tbl.h: Regenerated.
14 2008-05-21 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
16 * cr16-dis.c (build_mask): Adjust the mask for 32-bit bcond.
18 2008-05-14 Alan Modra <amodra@bigpond.net.au>
20 * Makefile.am: Run "make dep-am".
21 * Makefile.in: Regenerate.
23 2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
25 * i386-dis.c (MOVBE_Fixup): New.
27 (PREFIX_0F3880): Likewise.
28 (PREFIX_0F3881): Likewise.
29 (PREFIX_0F38F0): Updated.
30 (prefix_table): Add PREFIX_0F3880 and PREFIX_0F3881. Update
31 PREFIX_0F38F0 and PREFIX_0F38F1 for movbe.
32 (three_byte_table): Use PREFIX_0F3880 and PREFIX_0F3881.
34 * i386-gen.c (cpu_flag_init): Add CPU_MOVBE_FLAGS and
36 (cpu_flags): Add CpuMovbe and CpuEPT.
38 * i386-opc.h (CpuMovbe): New.
41 (i386_cpu_flags): Add cpumovbe and cpuept.
43 * i386-opc.tbl: Add entries for movbe and EPT instructions.
44 * i386-init.h: Regenerated.
45 * i386-tbl.h: Likewise.
47 2008-04-29 Adam Nemet <anemet@caviumnetworks.com>
49 * mips-opc.c (mips_builtin_opcodes): Set field `match' to 0 for
50 the two drem and the two dremu macros.
52 2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
54 * mips-opc.c (mips_builtin_opcodes): Mark prefx and c1
55 instructions FP_S. Mark l.s, li.s, lwc1, swc1, s.s, trunc.w.s and
56 cop1 macros INSN2_M_FP_S. Mark l.d, li.d, ldc1 and sdc1 macros
57 INSN2_M_FP_D. Mark trunc.w.d macro INSN2_M_FP_S and INSN2_M_FP_D.
59 2008-04-25 David S. Miller <davem@davemloft.net>
61 * sparc-dis.c: Emit %stick instead of %sys_tick, and %stick_cmpr
62 instead of %sys_tick_cmpr, as suggested in architecture manuals.
64 2008-04-23 Paolo Bonzini <bonzini@gnu.org>
66 * aclocal.m4: Regenerate.
67 * configure: Regenerate.
69 2008-04-23 David S. Miller <davem@davemloft.net>
71 * sparc-opc.c (asi_table): Add UltraSPARC and Niagara
73 (prefetch_table): Add missing values.
75 2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
77 * i386-gen.c (opcode_modifiers): Add NoAVX.
79 * i386-opc.h (NoAVX): New.
81 (i386_opcode_modifier): Add noavx.
83 * i386-opc.tbl: Add NoAVX to SSE, SSE2, SSE3 and SSSE3
84 instructions which don't have AVX equivalent.
85 * i386-tbl.h: Regenerated.
87 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
89 * i386-dis.c (OP_VEX_FMA): New.
90 (OP_EX_VexImmW): Likewise.
92 (Vex128FMA): Likewise.
93 (EXVexImmW): Likewise.
94 (get_vex_imm8): Likewise.
95 (OP_EX_VexReg): Likewise.
96 (vex_i4_done): Renamed to ...
98 (prefix_table): Replace EXVexW with EXVexImmW on vpermil2ps
99 and vpermil2pd. Replace Vex/Vex128 with VexFMA/Vex128FMA on
101 (print_insn): Updated.
102 (OP_EX_VexW): Rewrite to swap register in VEX with EX.
103 (OP_REG_VexI4): Check invalid high registers.
105 2008-04-16 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
106 Michael Meissner <michael.meissner@amd.com>
108 * i386-opc.tbl: Fix protX to allow memory in the middle operand.
109 * i386-tbl.h: Regenerate from i386-opc.tbl.
111 2008-04-14 Edmar Wienskoski <edmar@freescale.com>
113 * ppc-dis.c (powerpc_dialect): Handle "e500mc". Extend "e500" to
114 accept Power E500MC instructions.
115 (print_ppc_disassembler_options): Document -Me500mc.
116 * ppc-opc.c (DUIS, DUI, T): New.
117 (XRT, XRTRA): Likewise.
119 (powerpc_opcodes): Add new Power E500MC instructions.
121 2008-04-10 Andreas Krebbel <krebbel1@de.ibm.com>
123 * s390-dis.c (init_disasm): Evaluate disassembler_options.
124 (print_s390_disassembler_options): New function.
125 * disassemble.c (disassembler_usage): Invoke
126 print_s390_disassembler_options.
128 2008-04-10 Andreas Krebbel <krebbel1@de.ibm.com>
130 * s390-mkopc.c (insertExpandedMnemonic): Expand string sizes
131 of local variables used for mnemonic parsing: prefix, suffix and
134 2008-04-10 Andreas Krebbel <krebbel1@de.ibm.com>
136 * s390-mkopc.c (s390_cond_ext_format): Add back the mnemonic
137 extensions for conditional jumps (o, p, m, nz, z, nm, np, no).
138 (s390_crb_extensions): New extensions table.
139 (insertExpandedMnemonic): Handle '$' tag.
140 * s390-opc.txt: Remove conditional jump variants which can now
141 be expanded automatically.
142 Replace '*' tag with '$' in the compare and branch instructions.
144 2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
146 * i386-dis.c (PREFIX_VEX_38XX): Add a tab.
147 (PREFIX_VEX_3AXX): Likewis.
149 2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
151 * i386-opc.tbl: Remove 4 extra blank lines.
153 2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
155 * i386-gen.c (cpu_flag_init): Replace CPU_CLMUL_FLAGS/CpuCLMUL
156 with CPU_PCLMUL_FLAGS/CpuPCLMUL.
157 (cpu_flags): Replace CpuCLMUL with CpuPCLMUL.
158 * i386-opc.tbl: Likewise.
160 * i386-opc.h (CpuCLMUL): Renamed to ...
163 (i386_cpu_flags): Replace cpuclmul with cpupclmul.
165 * i386-init.h: Regenerated.
167 2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
169 * i386-dis.c (OP_E_register): New.
170 (OP_E_memory): Likewise.
172 (OP_EX_Vex): Likewise.
173 (OP_EX_VexW): Likewise.
174 (OP_XMM_Vex): Likewise.
175 (OP_XMM_VexW): Likewise.
176 (OP_REG_VexI4): Likewise.
177 (PCLMUL_Fixup): Likewise.
178 (VEXI4_Fixup): Likewise.
179 (VZERO_Fixup): Likewise.
180 (VCMP_Fixup): Likewise.
181 (VPERMIL2_Fixup): Likewise.
182 (rex_original): Likewise.
183 (rex_ignored): Likewise.
204 (VPERMIL2): Likewise.
205 (xmm_mode): Likewise.
206 (xmmq_mode): Likewise.
207 (ymmq_mode): Likewise.
208 (vex_mode): Likewise.
209 (vex128_mode): Likewise.
210 (vex256_mode): Likewise.
211 (USE_VEX_C4_TABLE): Likewise.
212 (USE_VEX_C5_TABLE): Likewise.
213 (USE_VEX_LEN_TABLE): Likewise.
214 (VEX_C4_TABLE): Likewise.
215 (VEX_C5_TABLE): Likewise.
216 (VEX_LEN_TABLE): Likewise.
217 (REG_VEX_XX): Likewise.
218 (MOD_VEX_XXX): Likewise.
219 (PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
220 (PREFIX_0F3A44): Likewise.
221 (PREFIX_0F3ADF): Likewise.
222 (PREFIX_VEX_XXX): Likewise.
224 (VEX_OF38): Likewise.
225 (VEX_OF3A): Likewise.
226 (VEX_LEN_XXX): Likewise.
228 (need_vex): Likewise.
229 (need_vex_reg): Likewise.
230 (vex_i4_done): Likewise.
231 (vex_table): Likewise.
232 (vex_len_table): Likewise.
233 (OP_REG_VexI4): Likewise.
234 (vex_cmp_op): Likewise.
235 (pclmul_op): Likewise.
236 (vpermil2_op): Likewise.
239 (PREFIX_0F38F0): Likewise.
240 (PREFIX_0F3A60): Likewise.
241 (reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
242 (prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
243 and PREFIX_VEX_XXX entries.
244 (x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
245 (three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
247 (mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
248 Add MOD_VEX_XXX entries.
249 (ckprefix): Initialize rex_original and rex_ignored. Store the
250 REX byte in rex_original.
251 (get_valid_dis386): Handle the implicit prefix in VEX prefix
252 bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
253 (print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
254 calling get_valid_dis386. Use rex_original and rex_ignored when
256 (putop): Handle "XY".
257 (intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
259 (OP_E_extended): Updated to use OP_E_register and
261 (OP_XMM): Handle VEX.
263 (XMM_Fixup): Likewise.
264 (CMP_Fixup): Use ARRAY_SIZE.
266 * i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
267 CPU_FMA_FLAGS and CPU_AVX_FLAGS.
268 (operand_type_init): Add OPERAND_TYPE_REGYMM and
269 OPERAND_TYPE_VEX_IMM4.
270 (cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
271 (opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
272 VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
273 VexImmExt and SSE2AVX.
274 (operand_types): Add RegYMM, Ymmword and Vex_Imm4.
276 * i386-opc.h (CpuAVX): New.
278 (CpuCLMUL): Likewise.
289 (Vex3Sources): Likewise.
290 (VexImmExt): Likewise.
294 (Vex_Imm4): Likewise.
295 (Implicit1stXmm0): Likewise.
298 (ByteOkIntel): Likewise.
301 (Unspecified): Likewise.
303 (i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
304 (i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
305 vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
306 vex3sources, veximmext and sse2avx.
307 (i386_operand_type): Add regymm, ymmword and vex_imm4.
309 * i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.
311 * i386-reg.tbl: Add AVX registers, ymm0..ymm15.
313 * i386-init.h: Regenerated.
314 * i386-tbl.h: Likewise.
316 2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
318 From Robin Getz <robin.getz@analog.com>
319 * bfin-dis.c (bu32): Typedef.
320 (enum const_forms_t): Add c_uimm32 and c_huimm32.
321 (constant_formats[]): Add uimm32 and huimm16.
326 (luimm16_val): Define.
327 (struct saved_state): Define.
328 (GREG, DPREG, DREG, PREG, SPREG, FPREG, IREG, MREG, BREG, LREG,
329 A0XREG, A0WREG, A1XREG, A1WREG,CCREG, LC0REG, LT0REG, LB0REG,
330 LC1REG, LT1REG, LB1REG, RETSREG, PCREG): Define.
332 (decode_LDIMMhalf_0): Print out the whole register value.
334 From Jie Zhang <jie.zhang@analog.com>
335 * bfin-dis.c (decode_dsp32mac_0): Decode (IU) option for
336 multiply and multiply-accumulate to data register instruction.
338 * bfin-dis.c: (c_uimm4s4d, c_imm5d, c_imm7d, c_imm16d, c_uimm16s4d,
339 c_imm32, c_huimm32e): Define.
340 (constant_formats): Add flags for printing decimal, leading spaces, and
342 (comment, parallel): Add global flags in all disassembly.
343 (fmtconst): Take advantage of new flags, and print default in hex.
344 (fmtconst_val): Likewise.
345 (decode_macfunc): Be consistant with spaces, tabs, comments,
346 capitalization in disassembly, fix minor coding style issues.
347 (reg_names, amod0, amod1, amod0amod2, aligndir, get_allreg): Likewise.
348 (decode_ProgCtrl_0, decode_PushPopMultiple_0, decode_CCflag_0,
349 decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
350 decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0, decode_LOGI2op_0,
351 decode_COMP3op_0, decode_COMPI2opD_0, decode_COMPI2opP_0,
352 decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
353 decode_dspLDST_0, decode_LDST_0, decode_LDSTiiFP_0, decode_LDSTii_0,
354 decode_LoopSetup_0, decode_LDIMMhalf_0, decode_CALLa_0,
355 decode_LDSTidxI_0, decode_linkage_0, decode_dsp32alu_0,
356 decode_dsp32shift_0, decode_dsp32shiftimm_0, decode_pseudodbg_assert_0,
357 _print_insn_bfin, print_insn_bfin): Likewise.
359 2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
361 * aclocal.m4: Regenerate.
362 * configure: Likewise.
363 * Makefile.in: Likewise.
365 2008-03-13 Alan Modra <amodra@bigpond.net.au>
367 * Makefile.am: Run "make dep-am".
368 * Makefile.in: Regenerate.
369 * configure: Regenerate.
371 2008-03-07 Alan Modra <amodra@bigpond.net.au>
373 * ppc-opc.c (powerpc_opcodes): Order and format.
375 2008-03-01 H.J. Lu <hongjiu.lu@intel.com>
377 * i386-opc.tbl: Allow 16-bit near indirect branches for x86-64.
378 * i386-tbl.h: Regenerated.
380 2008-02-23 H.J. Lu <hongjiu.lu@intel.com>
382 * i386-opc.tbl: Disallow 16-bit near indirect branches for
384 * i386-tbl.h: Regenerated.
386 2008-02-21 Jan Beulich <jbeulich@novell.com>
388 * i386-opc.tbl: Allow Dword for far indirect call. Allow Dword
389 and Fword for far indirect jmp. Allow Reg16 and Word for near
390 indirect jmp on x86-64. Disallow Fword for lcall.
391 * i386-tbl.h: Re-generate.
393 2008-02-18 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
395 * cr16-opc.c (cr16_num_optab): Defined
397 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
399 * i386-gen.c (operand_type_init): Add OPERAND_TYPE_INOUTPORTREG.
400 * i386-init.h: Regenerated.
402 2008-02-14 Nick Clifton <nickc@redhat.com>
405 * configure.in (SHARED_LIBADD): Select the correct host specific
406 file extension for shared libraries.
407 * configure: Regenerate.
409 2008-02-13 Jan Beulich <jbeulich@novell.com>
411 * i386-opc.h (RegFlat): New.
412 * i386-reg.tbl (flat): Add.
413 * i386-tbl.h: Re-generate.
415 2008-02-13 Jan Beulich <jbeulich@novell.com>
417 * i386-dis.c (a_mode): New.
418 (cond_jump_mode): Adjust.
419 (Ma): Change to a_mode.
420 (intel_operand_size): Handle a_mode.
421 * i386-opc.tbl: Allow Dword and Qword for bound.
422 * i386-tbl.h: Re-generate.
424 2008-02-13 Jan Beulich <jbeulich@novell.com>
426 * i386-gen.c (process_i386_registers): Process new fields.
427 * i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
428 unsigned char. Add dw2_regnum and Dw2Inval.
429 * i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
431 * i386-tbl.h: Re-generate.
433 2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
435 * i386-gen.c (cpu_flag_init): Add CPU_XSAVE_FLAGS.
436 * i386-init.h: Updated.
438 2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
440 * i386-gen.c (cpu_flags): Add CpuXsave.
442 * i386-opc.h (CpuXsave): New.
444 (i386_cpu_flags): Add cpuxsave.
446 * i386-dis.c (MOD_0FAE_REG_4): New.
447 (RM_0F01_REG_2): Likewise.
448 (MOD_0FAE_REG_5): Updated.
449 (RM_0F01_REG_3): Likewise.
450 (reg_table): Use MOD_0FAE_REG_4.
451 (mod_table): Use RM_0F01_REG_2. Add MOD_0FAE_REG_4. Updated
453 (rm_table): Add RM_0F01_REG_2.
455 * i386-opc.tbl: Add xsave, xrstor, xgetbv and xsetbv.
456 * i386-init.h: Regenerated.
457 * i386-tbl.h: Likewise.
459 2008-02-11 Jan Beulich <jbeulich@novell.com>
461 * i386-opc.tbl: Remove Disp32S from CpuNo64 opcodes. Remove
462 Disp16 from Cpu64 non-jump opcodes (including loop and j?cxz).
463 * i386-tbl.h: Re-generate.
465 2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
468 * configure: Regenerated.
470 2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
472 * mips-dis.c: Update copyright.
473 (mips_arch_choices): Add Octeon.
474 * mips-opc.c: Update copyright.
476 (mips_builtin_opcodes): Add Octeon instruction synciobdma.
478 2008-01-29 Alan Modra <amodra@bigpond.net.au>
480 * ppc-opc.c: Support optional L form mtmsr.
482 2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
484 * i386-dis.c (OP_E_extended): Handle r12 like rsp.
486 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
488 * i386-gen.c (cpu_flag_init): Add CpuLM to CPU_GENERIC64_FLAGS.
489 * i386-init.h: Regenerated.
491 2008-01-23 Tristan Gingold <gingold@adacore.com>
493 * ia64-dis.c (print_insn_ia64): Display symbolic name of ar.fcr,
494 ar.eflag, ar.csd, ar.ssd, ar.cflg, ar.fsr, ar.fir and ar.fdr.
496 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
498 * i386-gen.c (cpu_flag_init): Remove CpuMMX2.
499 (cpu_flags): Likewise.
501 * i386-opc.h (CpuMMX2): Removed.
504 * i386-opc.tbl: Replace CpuMMX2 with CpuSSE|Cpu3dnowA.
505 * i386-init.h: Regenerated.
506 * i386-tbl.h: Likewise.
508 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
510 * i386-gen.c (cpu_flag_init): Add CPU_VMX_FLAGS and
512 * i386-init.h: Regenerated.
514 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
516 * i386-opc.tbl: Use Qword on movddup.
517 * i386-tbl.h: Regenerated.
519 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
521 * i386-opc.tbl: Put back 16bit movsx/movzx for AT&T syntax.
522 * i386-tbl.h: Regenerated.
524 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
526 * i386-dis.c (Mx): New.
527 (PREFIX_0FC3): Likewise.
528 (PREFIX_0FC7_REG_6): Updated.
529 (dis386_twobyte): Use PREFIX_0FC3.
530 (prefix_table): Add PREFIX_0FC3. Use Mq on movntq and movntsd.
531 Use Mx on movntps, movntpd, movntdq and movntdqa. Use Md on
534 2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
536 * i386-gen.c (opcode_modifiers): Add IntelSyntax.
537 (operand_types): Add Mem.
539 * i386-opc.h (IntelSyntax): New.
540 * i386-opc.h (Mem): New.
542 (Opcode_Modifier_Max): Updated.
543 (i386_opcode_modifier): Add intelsyntax.
544 (i386_operand_type): Add mem.
546 * i386-opc.tbl: Remove Reg16 from movnti. Add sizes to more
549 * i386-reg.tbl: Add size for accumulator.
551 * i386-init.h: Regenerated.
552 * i386-tbl.h: Likewise.
554 2008-01-13 H.J. Lu <hongjiu.lu@intel.com>
556 * i386-opc.h (Byte): Fix a typo.
558 2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
561 * i386-gen.c (operand_type_init): Add Dword to
562 OPERAND_TYPE_ACC32. Add Qword to OPERAND_TYPE_ACC64.
563 (opcode_modifiers): Remove CheckSize, Byte, Word, Dword,
565 (operand_types): Add Byte, Word, Dword, Fword, Qword, Tbyte,
566 Xmmword, Unspecified and Anysize.
567 (set_bitfield): Make Mmword an alias of Qword. Make Oword
570 * i386-opc.h (CheckSize): Removed.
578 (i386_opcode_modifier): Remove checksize, byte, word, dword,
582 (Unspecified): Likewise.
584 (i386_operand_type): Add byte, word, dword, fword, qword,
585 tbyte xmmword, unspecified and anysize.
587 * i386-opc.tbl: Updated to use Byte, Word, Dword, Fword, Qword,
588 Tbyte, Xmmword, Unspecified and Anysize.
590 * i386-reg.tbl: Add size for accumulator.
592 * i386-init.h: Regenerated.
593 * i386-tbl.h: Likewise.
595 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
597 * i386-dis.c (REG_0F0E): Renamed to REG_0F0D.
599 (reg_table): Updated.
600 (dis386_twobyte): Updated. Use "nopQ" on 0x19 to 0x1e.
601 (twobyte_has_modrm): Set 1 for 0x19 to 0x1e.
603 2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
605 * i386-gen.c (set_bitfield): Use fail () on error.
607 2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
609 * i386-gen.c (lineno): New.
610 (filename): Likewise.
611 (set_bitfield): Report filename and line numer on error.
612 (process_i386_opcodes): Set filename and update lineno.
613 (process_i386_registers): Likewise.
615 2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
617 * i386-gen.c (opcode_modifiers): Rename IntelMnemonic to
620 * i386-opc.h (IntelMnemonic): Renamed to ..
622 (Opcode_Modifier_Max): Updated.
623 (i386_opcode_modifier): Remove intelmnemonic. Add attsyntax
626 * i386-opc.tbl: Remove IntelMnemonic and update with ATTSyntax
627 on fsub, fubp, fsubr, fsubrp, div, fdivp, fdivr and fdivrp.
628 * i386-tbl.h: Regenerated.
630 2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
632 * i386-gen.c: Update copyright to 2008.
633 * i386-opc.h: Likewise.
634 * i386-opc.tbl: Likewise.
636 * i386-init.h: Regenerated.
637 * i386-tbl.h: Likewise.
639 2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
641 * i386-opc.tbl: Add NoRex64 to extractps, movmskpd, movmskps,
642 pextrb, pextrw, pinsrb, pinsrw and pmovmskb.
643 * i386-tbl.h: Regenerated.
645 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
647 * i386-gen.c (cpu_flag_init): Remove CpuSSE4_1_Or_5 and
649 (cpu_flags): Likewise.
651 * i386-opc.h (CpuSSE4_1_Or_5): Removed.
652 (CpuSSE4_2_Or_ABM): Likewise.
654 (i386_cpu_flags): Remove cpusse4_1_or_5 and cpusse4_2_or_abm.
656 * i386-opc.tbl: Replace CpuSSE4_1_Or_5, CpuSSE4_2_Or_ABM and
657 Cpu686|CpuPadLock with CpuSSE4_1|CpuSSE5, CpuABM|CpuSSE4_2
658 and CpuPadLock, respectively.
659 * i386-init.h: Regenerated.
660 * i386-tbl.h: Likewise.
662 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
664 * i386-gen.c (opcode_modifiers): Remove No_xSuf.
666 * i386-opc.h (No_xSuf): Removed.
667 (CheckSize): Updated.
669 * i386-tbl.h: Regenerated.
671 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
673 * i386-gen.c (cpu_flag_init): Add CpuSSE4_2_Or_ABM to
674 CPU_AMDFAM10_FLAGS, CPU_SSE4_2_FLAGS, CpuABM and
676 (cpu_flags): Add CpuSSE4_2_Or_ABM.
678 * i386-opc.h (CpuSSE4_2_Or_ABM): New.
680 (i386_cpu_flags): Add cpusse4_2_or_abm.
682 * i386-opc.tbl: Use CpuSSE4_2_Or_ABM instead of
683 CpuABM|CpuSSE4_2 on popcnt.
684 * i386-init.h: Regenerated.
685 * i386-tbl.h: Likewise.
687 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
689 * i386-opc.h: Update comments.
691 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
693 * i386-gen.c (opcode_modifiers): Use Qword instead of QWord.
694 * i386-opc.h: Likewise.
695 * i386-opc.tbl: Likewise.
697 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
700 * i386-gen.c (opcode_modifiers): Add No_xSuf, CheckSize,
701 Byte, Word, Dword, QWord and Xmmword.
703 * i386-opc.h (No_xSuf): New.
704 (CheckSize): Likewise.
711 (i386_opcode_modifier): Add No_xSuf, CheckSize, Byte, Word,
712 Dword, QWord and Xmmword.
714 * i386-opc.tbl: Add CheckSize|QWord to movq if IgnoreSize is
716 * i386-tbl.h: Regenerated.
718 2008-01-02 Mark Kettenis <kettenis@gnu.org>
720 * m88k-dis.c (instructions): Fix fcvt.* instructions.
723 For older changes see ChangeLog-2007
729 version-control: never