2 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
4 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
5 instructions use a PC relative branch, not absolute.
8 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
10 * configure.in: Set libtool_enable_shared rather than
11 libtool_shared. Remove diversion hack.
12 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
14 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
16 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
17 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
19 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
21 * tic30-dis.c: New file.
22 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
23 * configure.in: Handle bfd_tic30_arch.
24 * Makefile.am: Rebuild dependencies.
25 (CFILES): Add tic30-dis.c
26 (ALL_MACHINES): Add tic30-dis.lo.
27 * configure, Makefile.in: Rebuild.
30 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
32 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
33 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
34 macwhi-a and macwlo-a instructions.
38 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
40 * dvp-opc.c, fixed encoding of a bunch of instructions to
41 be consistent with the asmvu assembler (and inconsistent
42 with the specification).
44 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
46 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
47 in the opcode table. The pkemscalf instruction must come first.
49 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
51 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
54 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
56 * m32r-opc.h (HAVE_CPU_M32R): Define.
59 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
61 * dvp-dis.c, dvp-opc.c: New files.
62 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
63 * configure: Regenerate.
64 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
65 (dvp-dis.lo,dvp-opc.lo): Add rules for.
66 (mips-dis.lo): Compile with @archdefs@.
67 * Makefile.in: Regenerate.
68 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
69 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
72 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
74 * v850-opc.c (insertion routines): If both alignment and size is
75 wrong then report this.
77 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
79 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
80 Only recognize instructions for the current target_processor.
82 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
84 * d10v-dis.c (PC_MASK): Correct value.
85 (print_operand): If there's a reloc, don't calculate the
86 address because they could be in different sections.
89 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
91 * cgen.sh: Rewrite to be like simulator's version.
92 * Makefile.am (cgen): Update call to cgen.sh.
93 * Makefile.in: Regenerate
96 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
98 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
99 instruction after the 4650's "mul" instruction; nobody's using the
100 4010 these days. If object files someday indicate which processor
101 variant they're intended for, we can do a better job at this.
104 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
106 * mips-opc.c (c.lt.s): Add r5900 variant.
110 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
112 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
113 table provided entry size. Use CGEN_INSN_MNEMONIC.
114 (cgen_parse_keyword): Rewrite.
115 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
116 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
117 * cgen-opc.c: Clean up pass over `struct foo' usage.
118 (cgen_keyword_lookup_value): Handle "" entry.
119 (cgen_keyword_add): Likewise.
120 start-sanitize-cygnus
121 * Makefile.am: Add cgen support.
122 * Makefile.in: Regenerate.
123 * configure.in: Add cgen support.
124 * configure: Regenerate.
125 * aclocal.m4: Regenerate.
126 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
129 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
131 * mips-opc.c: Add FP_D to s.d instruction flags.
133 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
135 * m68k-opc.c (halt, pulse): Enable them on the 68060.
138 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
140 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
141 PC relative offset forms before the 15 bit forms. An assembler command
142 line option now chooses the default.
146 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
148 * mips-opc.c: Add many missing r5900 instructions.
152 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
154 * d30v-opc.c (d30v_opcode_table): Set new flags bits
155 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
158 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
160 * configure: Only build libopcodes shared if --enable-shared's value
161 was `yes', or was set to `*opcodes*'.
162 * aclocal.m4: Likewise.
163 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
164 original source of this bit of code. It's not clear what the best fix
168 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
170 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
173 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
175 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
176 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
177 offset forms before the 15 bit forms, to default to the long forms.
180 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
182 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
184 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
186 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
187 symbol if none is present.
188 (print_insn_big_arm): Prevent examination of stored symbol if
191 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
193 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
195 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
197 * disassemble.c: Remove disasm_symaddr() function.
199 * arm-dis.c: Use info->symbol instead of info->flags to determine
200 if disassmbly should be in Thumb or Arm mode.
202 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
204 * arm-dis.c: Add support for disassembling Thumb opcodes.
205 (print_insn_thumb): New function.
207 * disassemble.c (disasm_symaddr): New function.
209 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
210 (thumb_opcodes): Table of Thumb opcodes.
212 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
214 * m68k-opc.c (btst): Change Dd@s to Dd;b.
216 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
217 and 'v' as operand types.
219 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
221 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
222 <olivier.carmona@di.epfl.ch>.
223 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
224 which has a two word opcode with a one word argument.
227 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
229 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
230 unsigned, not signed.
231 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
235 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
237 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
238 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
239 (ftrv): Slay the cut-and-paste monster.
242 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
244 * d10v-dis.c (print_operand):
245 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
247 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
249 * d10v-opc.c (OPERAND_FLAG): Split into:
250 (OPERAND_FFLAG, OPERAND_CFLAG) .
254 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
256 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
257 field for all INSN_MACRO's.
260 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
262 * mips-opc.c (sync,cache): These are 3900 insns.
264 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
266 sh-opc.h (sh_table): Remove ftst/nan.
268 start-sanitize-vr5400
269 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
271 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
272 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
274 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
278 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
280 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
281 Add tx49 insns and configury.
284 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
286 * mips-opc.c (ffc, ffs): Fix mask.
289 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
291 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
295 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
297 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
298 start-sanitize-vr5400
299 Added VR5400 instructions.
300 (N5): New cpu-id macro.
302 (WR_HILO, RD_HILO, MOD_HILO): New macros.
304 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
306 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
307 (WR_HILO, RD_HILO, MOD_HILO): New macros.
309 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
311 * v850-dis.c (disassemble): Replace // with /* ... */
313 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
315 * sparc-opc.c: Add wr & rd for v9a asr's.
316 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
317 (v9a_asr_reg_names): New variable.
318 Patch from David Miller <davem@vger.rutgers.edu>.
320 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
322 * sparc-opc.c (v9notv9a): New insn type.
323 (IMPDEP): Move to the end to not conflict with edge8 et al.
324 Patch from David Miller <davem@vger.rutgers.edu>.
326 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
328 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
330 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
332 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
334 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
336 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
337 of disassemble_info structure to determine if an overlay address
338 has a matching symbol in low memory.
340 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
341 new symbol_at_address_func field in disassemble_info structure.
343 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
345 * v850-opc.c (extract_d22): Use signed arithmatic.
347 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
349 * mips-opc.c: Three op mult is not an ISA insn.
351 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
353 * mips-opc.c: Fix formatting.
355 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
357 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
358 than assuming that char is signed. Explicitly sign extend 16 bit
359 values, rather than assuming that short is 16 bits.
360 (OP_sI, OP_J, OP_DIR): Likewise.
363 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
365 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
369 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
371 * v850-opc.c: Fix typo in comment.
373 * v850-dis.c (disassemble): Add test of processor type when
376 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
378 * configure.in: Use a diversion to set enable_shared before the
379 arguments are parsed.
380 * configure: Rebuild.
382 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
384 * m68k-opc.c (TBL1): Use ! rather than `.
385 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
387 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
389 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
391 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
393 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
396 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
397 * aclocal.m4: Rebuild with new libtool.
398 * configure: Rebuild.
401 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
403 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
406 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
408 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
410 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
412 * v850-opc.c (v850_opcodes): Further rearrangements.
415 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
417 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
420 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
422 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
425 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
427 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
429 * mips16-opc.c: Added mips16 sdbbp.
432 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
434 * v850-opc.c: Initialise processors field of v850_opcode structure.
437 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
439 Merge changes from Martin Hunt:
441 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
443 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
444 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
445 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
447 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
449 * d30v-dis.c (print_insn): First operand of d*i (delayed
450 branch) instructions is relative.
452 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
453 (d30v_operand_table): Add IMM6S3 type.
454 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
456 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
457 and cmp instructions.
459 * d30v-opc.c: Correct entries for repeat*, and sat*.
460 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
461 types. Correct several formats.
463 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
465 * d30v-opc.c (pre_defined_registers): Change control registers.
467 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
468 SHORT_C2. Manual was incorrect.
470 * d30v-dis.c (lookup_opcode): Return value now indicates
471 if an opcode has a short and a long form. Used for deciding
472 to append a ".s" or ".l".
473 (print_insn): Append a ".s" to an instruction if it is
474 the short form and ".l" if it is a long form. Do not append
475 anything if the instruction has only one possible size.
477 * d30v-opc.c: Change mulx2h to require an even register.
478 New form: SHORT_A2; a SHORT_A form that needs an even
479 register as the first operand.
481 * d30v-dis.c (print_insn_d30v): Fix problem where the last
482 instruction was not being disassembled if there were an odd
483 number of instructions.
485 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
489 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
491 * v850-dis.c (disassemble): Improved display of register lists.
494 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
496 * sparc-opc.c (sparc_opcodes): Fix assembler args to
497 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
498 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
499 fandnot1s, fandnot2s.
501 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
503 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
505 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
507 * cgen-asm.c (cgen_parse_address): New argument resultp.
509 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
511 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
513 * mn10200-dis.c (disassemble): PC relative instructions are
514 relative to the next instruction, not the current instruction.
516 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
518 * v850-dis.c (disassemble): Only signed extend values that are not
519 returned by extract functions.
520 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
522 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
524 * v850-opc.c: Update comments. Remove use of
525 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
527 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
529 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
531 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
533 * configure: Rebuilt with latest devo autoconf for NT support.
535 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
537 * v850-dis.c (disassemble): Use curly brace syntax for register
540 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
541 where r0 is being used as a destination register.
544 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
546 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
550 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
552 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
553 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
554 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
555 Add insns to access SGR and DBR.
556 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
559 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
561 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
564 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
566 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
567 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
570 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
572 * configure (cgen_files): Add support for v850e target.
573 * configure.in (cgen_files): Add support for v850e target.
575 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
577 * configure (cgen_files): Add support for v850ea target.
578 * configure.in (cgen_files): Add support for v850ea target.
581 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
583 * configure.in (bfd_arc_arch): Add.
584 * configure: Rebuild.
585 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
586 * Makefile.in: Rebuild.
587 * arc-dis.c, arc-opc.c: New files.
588 * disassemble.c (ARCH_all): Define ARCH_arc.
589 (disassembler): Add ARC support.
591 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
594 * v850-dis.c (disassemble): Add support for v850EA instructions.
596 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
597 (v850_opcodes): Add v850EA instructions.
599 * v850-dis.c (disassemble): Add support for v850E instructions.
601 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
602 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
603 insert_spe, extract_spe): New Functions.
604 (v850_opcodes): Add v850E instructions.
607 * v850-opc.c: Reorganised and re-layed out to improve readability
610 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
612 * configure: Rebuild with autoconf 2.12.1.
614 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
616 * aclocal.m4, configure: Rebuild with new automake patches.
618 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
620 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
621 * acinclude.m4: Just include acinclude.m4 from BFD.
622 * aclocal.m4, configure: Rebuild.
624 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
626 * Makefile.am: New file, based on old Makefile.in.
627 * acconfig.h: New file.
628 * acinclude.m4: New file.
629 * stamp-h.in: New file.
630 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
631 Removed shared library handling; now handled by libtool. Replace
632 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
633 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
634 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
635 handling in AC_OUTPUT.
636 * dep-in.sed: Change .o to .lo.
637 * Makefile.in: Now built with automake.
638 * aclocal.m4: Now built with aclocal.
639 * config.in, configure: Rebuild.
641 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
643 * mips-opc.c: Fix typo/thinko in "eret" instruction.
646 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
648 * mips-opc.c: Fix coding of mtsa.
651 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
653 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
655 * sparc-dis.c (sorted_opcodes): New static local.
656 (struct opcode_hash): `opcode' is pointer to const element.
657 (build_hash): First arg is now table of sorted pointers.
658 (print_insn_sparc): Sort opcodes by sorting table of pointers.
659 (compare_opcodes): Update.
661 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
663 * cgen-opc.c: #include <ctype.h>.
664 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
665 Handle case insensitive hashing.
666 (hash_keyword_value): Change type of `value' to unsigned int.
668 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
670 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
671 precision FP, mark it as such. Likewise for double precision
672 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
675 (mips_builtin_opcodes): Remove non-existant r5900 instructions
679 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
681 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
682 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
685 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
687 * ppc-opc.c (extract_nsi): make unsigned expression signed before
689 (UNUSED): remove one level of parens, so MSVC doesn't choke on
690 nesting depth when all the macros are expanded.
692 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
694 * sparc-opc.c: The fcmp v9a instructions take an integer register
695 as a destination, not a floating point register. From Christian
696 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
698 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
700 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
701 syntax. From Roman Hodek
702 <rnhodek@faui22c.informatik.uni-erlangen.de>.
704 * i386-dis.c (twobyte_has_modrm): Fix pand.
706 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
708 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
710 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
712 * arm-dis.c: Add prototypes for arm_decode_shift and
715 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
717 * mips-opc.c: Add r3900 insns.
719 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
721 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
722 print delay slot instructions on the same line. When using a PC
723 relative load, add a comment with the value being loaded if it can
726 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
728 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
729 to pushS/popS for segment regs and byte constant so that
730 pushw/popw printed when in 16 bit data mode.
732 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
733 print cbtw, cwtd in 16 bit data mode.
734 * i386-dis.c (putop): extra case W to support above.
736 * i386-dis.c (print_insn_x86): print addr32 prefix when given
737 address size prefix in 16 bit address mode.
739 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
741 * sh-dis.c: Reindent. Rename local variable fprintf to
744 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
746 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
748 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
750 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
752 * mips16-opc.c (mip16_opcodes): same.
754 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
756 * m68k-opc.c (moveb): Change $d to %d.
758 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
760 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
761 (twobyte_has_modrm): Likewise.
763 (OP_MMX, OP_EM, OP_MS): New static functions.
765 * i386-dis.c: Revert patch of April 4. The output now matches
768 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
770 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
773 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
775 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
777 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
779 * Makefile.in (install): Depend upon installdirs.
780 (installdirs): New target.
782 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
784 From Thomas Graichen <graichen@rzpd.de>:
785 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
786 * configure: Rebuild.
788 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
790 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
791 Delete string{,s}.h support.
793 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
795 * cgen-asm.c (cgen_parse_operand_fn): New global.
796 (cgen_parse_{{,un}signed_integer,address}): Update call to
797 cgen_parse_operand_fn.
798 (cgen_init_parse_operand): New function.
799 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
800 from cgen_asm_init_parse.
801 (m32r_cgen_assemble_insn): New operand `errmsg'.
802 Delete call to as_bad, return error message to caller.
803 (m32r_cgen_asm_hash_keywords): #if 0 out.
805 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
807 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
809 [case 'J']: Fix typo in register name.
811 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
813 * configure.in: Substitute SHLIB_LIBS.
814 * configure: Rebuild.
815 * Makefile.in (SHLIB_LIBS): New variable.
816 ($(SHLIB)): Use $(SHLIB_LIBS).
818 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
820 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
822 * cgen-opc.c (hash_keyword_name): Improve algorithm.
824 * disassemble.c (disassembler): Handle m32r.
826 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
828 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
829 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
830 * Makefile.in (CFILES): Add them.
831 (ALL_MACHINES): Add them.
832 (dependencies): Regenerate.
833 * configure.in (cgen_files): New variable.
834 (bfd_m32r_arch): Add entry.
835 * configure: Regenerate.
837 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
839 * configure.in: Correct file names for bfd_mn10[23]00_arch.
840 * configure: Rebuild.
842 * Makefile.in: Rebuild dependencies.
844 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
846 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
849 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
851 * Branched binutils 2.8.
853 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
855 * m10200-dis.c: Rename from mn10200-dis.c.
856 * m10200-opc.c: Rename from mn10200-opc.c.
857 * m10300-dis.c: Rename from mn10300-dis.c
858 * m10300-opc.c: Rename from mn10300-opc.c.
859 * Makefile.in: Update accordingly.
861 * mips16-opc.c: Add mul and dmul macros.
863 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
865 * makefile.vms: Update CFLAGS, add clean target.
867 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
869 * mips-opc.c: Add "wait". From Ralf Baechle
870 <ralf@gnu.ai.mit.edu>.
872 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
873 * configure, config.in: Rebuild.
874 * sysdep.h: Include <stdlib.h> if it exists.
875 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
877 * Makefile.in: Rebuild dependencies.
879 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
881 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
882 Andrew Bray <andy@madhouse.demon.co.uk>.
884 * mips-opc.c: Add cast when setting mips_opcodes.
886 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
888 * v850-dis.c (disassemble): Fix sign extension problem.
889 * v850-opc.c (extract_d*): Fix sign extension problems to make
890 disassembly calculate branch offsets correctly.
892 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
894 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
896 * mips-opc.c: Add dctr and dctw.
899 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
901 * d30v-dis.c (print_insn): Change the way signed constants
904 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
906 * Makefile.in (BFD_H): New variable.
907 (HFILES): New variable.
908 (CFILES): Add all C files.
909 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
910 Delete old dependencies, and build new ones.
911 * dep-in.sed: New file.
913 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
915 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
917 start-sanitize-coldfire
918 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
920 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
923 end-sanitize-coldfire
924 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
926 * mn10200-opc.c: Change "trap" to "syscall".
927 * mn10300-opc.c: Add new "syscall" instruction.
929 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
931 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
932 mulul insns on the coldfire.
934 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
936 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
937 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
938 (print_insn_little_arm): Likewise.
940 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
942 Based on patches from H.J. Lu <hjl@lucon.org>:
943 * i386-dis.c (fetch_data): Add prototype.
944 * m68k-dis.c (fetch_data): Add prototype.
945 (dummy_print_address): Add prototype. Make static.
946 * ppc-opc.c (valid_bo): Add prototype.
947 * sparc-dis.c (build_hash_table): Add prototype.
948 (is_delayed_branch, compute_arch_mask): Add prototypes.
949 (print_insn_sparc): Make several local variables const.
950 (compare_opcodes): Change arguments to const PTR. Add prototype.
951 * sparc-opc.c (arg): Change name field to be const.
952 (lookup_name, lookup_value): Add prototypes. Change table and
953 name parameters to be const.
954 (sparc_encode_asi): Change name parameter to be const.
955 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
956 (sparc_encode_sparclet_cpreg): Likewise.
957 (sparc_decode_asi): Change return type to be const.
958 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
959 (sparc_decode_sparclet_cpreg): Likewise.
961 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
963 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
964 Solaris doesn't like the combined options, and the -f is
966 (stamp-tshlink, install): Likewise.
968 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
970 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
973 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
975 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
977 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
979 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
982 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
984 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
987 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
989 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
991 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
993 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
996 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
998 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
999 floatformat_to_double to make portable.
1000 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1003 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1005 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1006 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1008 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1010 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1011 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1013 start-sanitize-tic80
1014 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1016 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1017 (OFF_SL_BR_SCALED): ... to this, and added the flag
1018 TIC80_OPERAND_BASEREL to the flags word.
1019 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1023 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1025 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1026 Change mips_opcodes from const array to a pointer,
1027 and change bfd_mips_num_opcodes from const int to int,
1028 so that we can increase the size of the mips opcodes table
1031 start-sanitize-tic80
1032 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1034 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1035 store BITNUM values in the table in one's complement form
1036 to match behavior when assembler is given a raw numeric
1037 value for a BITNUM operand.
1038 * tic80-dis.c (print_operand_bitnum): Ditto.
1042 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1044 * d30v-opc.c: Removed references to FLAG_X.
1047 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1049 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1052 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1054 * Makefile.in: Added d30v object files.
1055 * configure: (bfd_d30v_arch) Rebuilt.
1056 * configure.in: (bfd_d30v_arch) Added new case.
1057 * d30v-dis.c: New file.
1058 * d30v-opc.c: New file.
1059 * disassemble.c (disassembler) Add entry for d30v.
1062 start-sanitize-tic80
1063 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1065 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1066 representations for the floating point BITNUM values.
1068 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1070 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1071 in the table in one's complement form, as they appear in the
1073 (tic80_symbol_to_value): Use macros to access predefined
1075 (tic80_value_to_symbol): Ditto.
1076 (tic80_next_predefined_symbol): New function.
1077 * tic80-dis.c (print_operand_bitnum): Remove code that did
1078 one's complement for BITNUM values.
1081 start-sanitize-r5900
1082 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1084 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1087 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1089 * makefile.vms: Remove 8 bit characters. Update to latest
1092 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1094 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1096 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1098 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1099 (IMM24_PCREL): Likewise.
1101 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1103 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1104 address for an extended PC relative instruction that is not a
1107 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1109 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1112 start-sanitize-tic80
1113 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1115 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1116 (tic80_opcodes): Sort entries so that long immediate forms
1117 come after short immediate forms, making it easier for
1118 assembler to select the right one for a given operand.
1121 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1123 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1125 (print_insn_mips16): Likewise.
1127 start-sanitize-r5900
1128 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1130 * mips-opc.c: add r5900.
1133 start-sanitize-tic80
1134 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1136 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1137 a symbol class that restricts translation to just that
1138 class (general register, condition code, etc).
1140 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1142 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1143 and REG_DEST_E for register operands that have to be
1144 an even numbered register. Add REG_FPA for operands that
1145 are one of the floating point accumulator registers.
1146 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1147 (tic80_opcodes): Change entries that need even numbered
1148 register operands to use the new operand table entries.
1149 Add "or" entries that are identical to "or.tt" entries.
1152 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1154 * mips16-opc.c: Add new cases of exit instruction for
1156 * mips-dis.c (print_mips16_insn_arg): Display floating point
1157 registers in operands of exit instruction. Print `$' before
1158 register names in operands of entry and exit instructions.
1160 start-sanitize-tic80
1161 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1163 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1164 pairs for all predefined symbols recognized by the assembler.
1165 Also used by the disassembling routines.
1166 (tic80_symbol_to_value): New function.
1167 (tic80_value_to_symbol): New function.
1168 * tic80-dis.c (print_operand_control_register,
1169 print_operand_condition_code, print_operand_bitnum):
1170 Remove private tables and use tic80_value_to_symbol function.
1173 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1175 * d10v-dis.c (print_operand): Change address printing
1176 to correctly handle PC wrapping. Fixes PR11490.
1178 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1180 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1183 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1185 * mips-dis.c (print_insn_mips16): Set insn_info information.
1186 (print_mips16_insn_arg): Likewise.
1188 * mips-dis.c (print_insn_mips16): Better handling of an extend
1189 opcode followed by an instruction which can not be extended.
1191 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1193 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1194 coldfire moveb instruction to not allow an address register as
1195 destination. Although the documentation does not indicate that
1196 this is invalid, experiments uncovered unexpected behavior.
1197 Added a comment explaining the situation. Thanks to Andreas
1198 Schwab for pointing this out to me.
1200 start-sanitize-tic80
1201 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1203 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1204 entries are presorted so that entries with the same mnemonic are
1205 adjacent to each other in the table. Sort the entries for each
1206 instruction so that this is true.
1209 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1211 * m68k-dis.c: Include <libiberty.h>.
1212 (print_insn_m68k): Sort the opcode table on the most significant
1213 nibble of the opcode.
1215 start-sanitize-tic80
1216 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1218 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1219 "vsub", "vst", "xnor", and "xor" instructions.
1220 (V_a1): Renamed from V_a, msb of accumulator reg number.
1221 (V_a0): Add macro, lsb of accumulator reg number.
1223 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1225 * tic80-dis.c (print_insn_tic80): Broke excessively long
1226 function up into several smaller ones and arranged for
1227 the instruction printing function to be callable recursively
1228 to print vector instructions that have both a load and a
1229 math instruction packed into a single opcode.
1230 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1231 to explain why it comes after the other vector opcodes.
1234 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1236 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1237 move insns to handle immediate operands.
1239 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1241 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1242 fix operand mask in the "moveml" entries for the coldfire.
1244 start-sanitize-tic80
1245 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1247 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1248 New macros for building vector instruction opcodes.
1249 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1250 FMT_LI, which were unused. The field is now a flags field.
1251 Remove some opcodes that are possible, but illegal, such
1252 as long immediate instructions with doubles for immediate
1253 values. Add "vadd" and "vld" instructions.
1255 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1257 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1258 the order more logical. Move the shift alias instructions ("rotl",
1259 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1260 interspersed with the regular sr.x and sl.x instructions. Add
1261 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1262 "sub", "subu", "swcr", and "trap".
1264 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1266 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1267 (OFF_SL_PC): Renamed from OFF_SL.
1268 (OFF_SS_BR): New operand type for base relative operand.
1269 (OFF_SL_BR): New operand type for base relative operand.
1270 (REG_BASE): New operand type for base register operand.
1271 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1272 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1273 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1275 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1276 10 char field, padded with spaces on rhs, rather than a string
1277 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1278 than old TIC80_OPERAND_RELATIVE. Add support for new
1279 TIC80_OPERAND_BASEREL flag bit.
1281 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1283 * tic80-dis.c (print_insn_tic80): Print floating point operands
1285 * tic80-opc.c (SPFI): Add single precision floating point
1286 immediate operand type.
1287 (ROTATE): Add rotate operand type for shifts.
1288 (ENDMASK): Add for shifts.
1289 (n): Macro for the 'n' bit.
1290 (i): Macro for the 'i' bit.
1291 (PD): Macro for the 'PD' field.
1292 (P2): Macro for the 'P2' field.
1293 (P1): Macro for the 'P1' field.
1294 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1298 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1300 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1301 adding in current address for pc-relative operands.
1303 start-sanitize-tic80
1304 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1306 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1307 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1308 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1309 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1310 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1311 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1312 (REG_SCALED, LSI_SCALED): New operand types.
1313 (E): New macro for 'E' bit at bit 27.
1314 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1315 opcodes, including the various size flavors (b,h,w,d) for
1316 the direct load and store instructions.
1318 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1320 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1322 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1323 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1324 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1325 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1326 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1327 masks with "MASK_* & ~M_*" to get the M bit reset.
1328 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1330 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1332 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1333 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1334 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1336 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1337 CC, SICR, and LICR table entries.
1338 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1339 "bcnd", and "brcr" opcodes.
1342 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1344 * ppc-opc.c (powerpc_operands): Make comment match the
1345 actual fields (no shift field).
1346 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1347 start-sanitize-tic80
1348 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1349 partial implementation, work in progress.
1350 * tic80-opc.c (tic80_operands): Begin construction operands table.
1351 (tic80_opcodes): Continue populating opcodes table and start
1352 filling in the operand indices.
1353 (tic80_num_opcodes): Add this.
1356 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1358 * m68k-opc.c: Add #B case for moveq.
1360 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1362 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1363 before they are used.
1365 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1367 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1368 for "breakpoint" instruction.
1370 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1372 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1373 (dep): Use ALL_CFLAGS rather than CFLAGS.
1375 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1377 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1380 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1382 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1383 start-sanitize-tic80
1384 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1387 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1389 * mips16-opc.c: Add "abs".
1391 start-sanitize-tic80
1392 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1394 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1395 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1396 (disassembler): Add bfd_arch_tic80 support to set disassemble
1397 to print_insn_tic80.
1398 * tic80-dis.c (print_insn_tic80): Add stub.
1400 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1402 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1403 * configure: Regenerate with autoconf.
1404 * tic80-dis.c: Add file.
1405 * tic80-opc.c: Add file.
1408 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1410 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1412 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1414 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1415 (mn10200_opcodes): Use it for some logicals and btst insns.
1416 Add "break" and "trap" instructions.
1418 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1420 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1422 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1424 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1425 relative load or add now depends upon whether the instruction is
1428 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1430 * mn10200-dis.c: Finish writing disassembler.
1431 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1432 Fix mask for "jmp (an)".
1434 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1435 handle endianness issues for mn10300.
1437 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1439 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1441 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1442 instruction. Fix opcode field for "movb (imm24),dn".
1444 * mn10200-opc.c (mn10200_operands): Fix insertion position
1447 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1449 * mn10200-opc.c: Create mn10200 opcode table.
1450 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1451 but moving along nicely.
1453 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1455 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1457 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1459 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1460 specifiers for fmovem* instructions.
1462 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1464 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1466 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1468 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1471 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1473 * mn10300-opc.c: Add some comments explaining the various
1476 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1478 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1480 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1483 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1484 operand specifiers in fmovm* instructions.
1486 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1488 * ppc-opc.c (insert_li): Give an error if the offset has the two
1489 least significant bits set.
1491 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1493 * mips-dis.c (print_insn_mips16): Separate the instruction from
1494 the arguments with a tab, not a space.
1496 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1498 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1501 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1504 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1506 * configure: Rebuild with autoconf 2.12.
1508 Add support for mips16 (16 bit MIPS implementation):
1509 * mips16-opc.c: New file.
1510 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1511 (mips16_reg_names): New static array.
1512 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1513 after seeing a 16 bit symbol.
1514 (print_insn_little_mips): Likewise.
1515 (print_insn_mips16): New static function.
1516 (print_mips16_insn_arg): New static function.
1517 * mips-opc.c: Add jalx instruction.
1518 * Makefile.in (mips16-opc.o): New target.
1519 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1520 * configure: Rebuild.
1522 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1524 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1525 operand specifiers in *save, *restore and movem* instructions.
1527 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1530 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1531 register operands for immediate arithmetic, not, neg, negx, and
1532 set according to condition instructions.
1534 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1535 specifier of the effective-address operand in immediate forms of
1536 arithmetic instructions. The specifier for the immediate operand
1537 notes how and where the constant will be stored.
1539 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1541 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1544 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1547 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1549 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1551 * mn10300-dis.c (disassemble): Handle register lists.
1553 * mn10300-opc.c: Fix handling of register list operand for
1554 "call", "ret", and "rets" instructions.
1556 * mn10300-dis.c (disassemble): Print PC-relative and memory
1557 addresses symbolically if possible.
1558 * mn10300-opc.c: Distinguish between absolute memory addresses,
1559 pc-relative offsets & random immediates.
1561 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1563 (disassemble): Handle SPLIT and EXTENDED operands.
1565 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1567 * mn10300-dis.c: Rough cut at printing some operands.
1569 * mn10300-dis.c: Start working on disassembler support.
1570 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1572 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1574 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1576 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1578 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1580 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1582 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1583 register argument is calls and jmp instructions.
1585 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1587 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1588 getx operand. Fix opcode for mulqu imm,dn.
1590 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1592 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1593 in MN10300_OPERAND_SPLIT operands for how many bits
1594 appear in the basic insn word. Add IMM32_HIGH24,
1595 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1596 (mn10300_opcodes): Use new operands as needed.
1598 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1599 for bset, bclr, btst instructions.
1600 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1602 * mn10300-opc.c (mn10300_operands): Remove many redundant
1603 operands. Update opcode table as appropriate.
1604 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1605 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1607 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1609 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1610 operands (for indexed load/stores). Fix bitpos for DI
1611 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1612 few instructions that insert immediates/displacements in the
1613 middle of the instruction. Add IMM8E for 8 bit immediate in
1614 the extended part of an instruction.
1615 (mn10300_operands): Use new opcodes as appropriate.
1617 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1619 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1620 sequential so the assembler never parallelizes it with
1623 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1625 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1626 a data/address register that appears in register field 0
1627 and register field 1.
1628 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1630 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1632 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1633 standard disassembly.
1635 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1636 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1637 Recategorize PALcode instructions.
1639 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1641 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1643 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1645 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1646 there are no operand types.
1648 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1650 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1652 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1654 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1656 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1658 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1660 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1661 and sst.w instructions.
1663 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1666 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1668 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1671 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1673 * ppc-opc.c (PPCPWR2): Define.
1674 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1677 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1679 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1680 field for movhu instruction.
1682 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1683 cast value to "long" not "signed long" to keep hpux10
1686 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1688 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1691 * mn10300-opc.c (FMT*): Remove definitions.
1693 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1694 for shift-by-register opcodes.
1696 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1697 into [AD][MN][01] for encoding the position of the register
1700 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1702 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1703 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1705 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1707 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1708 Fix various typos. Add "PAREN" operand.
1709 (MEM, MEM2): Define.
1710 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1711 operands. Fix several typos.
1713 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1716 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1718 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1719 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1721 (mn10300_opcodes): Break opcode format out into its own field.
1722 Update many operand fields to deal with signed vs unsigned
1723 issues. Fix one or two typos in the "mov" instruction
1724 opcode, mask and/or operand fields.
1726 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1728 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1729 m68851 wasn't reset.
1731 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1733 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1734 all opcodes. Very rough cut at operands for all opcodes.
1736 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1739 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1741 * mn10200-opc.c, mn10300-opc.c: New files.
1742 * mn10200-dis.c, mn10300-dis.c: New files.
1743 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1744 * disassemble.c: Break mn10x00 support into 10200 and 10300
1746 * configure.in: Likewise.
1747 * configure: Rebuilt.
1749 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1751 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1753 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1755 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1757 * disassemble (ARCH_mn10x00): Define.
1758 (disassembler): Handle bfd_arch_mn10x00.
1759 * configure.in: Recognize bfd_mn10x00_arch.
1760 * configure: Rebuilt.
1762 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1764 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1765 accordingly. Don't declare functions using op_rtn.
1767 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1769 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1770 params to be more standard.
1771 * (disassemble): Print absolute addresses and symbolic names for
1772 branch and jump targets.
1773 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1775 * (v850_opcodes): Add breakpoint insn.
1777 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1779 * m68k-opc.c: Move the fmovemx data register cases before the
1780 other cases, so that they get recognized before the data register
1781 does gets treated as a degenerate register list.
1783 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1785 * mips-opc.c: Add a case for "div" and "divu" with two registers
1786 and a destination of $0.
1788 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1790 * mips-dis.c (print_insn_arg): Add prototype.
1791 (_print_insn_mips): Ditto.
1793 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1795 * mips-dis.c (print_insn_arg): Print condition code registers as
1798 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1800 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1802 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1804 * v850-dis.c (disassemble): Make static. Provide prototype.
1806 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1808 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1811 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1813 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1814 ']' characters into the output stream.
1815 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1816 Add "memop" field to all opcodes (for the disassembler).
1817 Reorder opcodes so that "nop" comes before "mov" and "jr"
1818 comes before "jarl".
1820 * v850-dis.c (print_insn_v850): Fix typo in last change.
1822 * v850-dis.c (print_insn_v850): Properly handle disassembling
1823 a two byte insn at the end of a memory region when the memory
1824 region's size is only two byte aligned.
1826 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1828 * v850-dis.c (v850_reg_names): Define.
1829 (v850_sreg_names, v850_cc_names): Likewise.
1830 (disassemble): Very rough cut at printing operands (unformatted).
1832 * v850-opc.c (BOP_MASK): Fix.
1833 (v850_opcodes): Fix mask for jarl and jr.
1835 * v850-dis.c: New file. Skeleton for disassembler support.
1836 * Makefile.in Remove v850 references, they're not needed here.
1837 * configure.in: Add v850-dis.o when building v850 toolchains.
1838 * configure: Rebuilt.
1839 * disassemble.c (disassembler): Call v850 disassembler.
1841 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1842 (insert_d8_6, extract_d8_6): New functions.
1843 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1844 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1846 (IF4A, IF4B): Use "D7" instead of "D7S".
1847 (IF4C, IF4D): Use "D8_7" instead of "D8".
1848 (IF4E, IF4F): New. Use "D8_6".
1849 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1850 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1852 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1853 (v850_operands): Change D16 to D16_15, use special insert/extract
1854 routines. New new D16 that uses the generic insert/extract code.
1855 (IF7A, IF7B): Use D16_15.
1856 (IF7C, IF7D): New. Use D16.
1857 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1859 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1860 message. Issue an error if the branch offset is odd.
1862 * v850-opc.c: Add notes about needing special insert/extract
1863 for all the load/store insns, except "ld.b" and "st.b".
1865 * v850-opc.c (insert_d22, extract_d22): New functions.
1866 (v850_operands): Use insert_d22 and extract_d22 for
1868 (insert_d9): Fix range check.
1870 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1872 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1873 and set bits field to D9 and D22 operands.
1875 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1877 * v850-opc.c (v850_operands): Define SR2 operand.
1878 (v850_opcodes): "ldsr" uses R1,SR2.
1880 * v850-opc.c (v850_opcodes): Fix opcode specs for
1881 sld.w, sst.b, sst.h, sst.w, and nop.
1883 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1885 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1886 end of the opcode table.
1888 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1890 * d10v-opc.c (pre_defined_registers): Added register pairs,
1891 "r0-r1", "r2-r3", etc.
1893 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1895 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1896 Create I16U for an unsigned 16bit mmediate operand.
1897 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1899 * v850-opc.c (v850_operands): Define EP operand.
1900 (IF4A, IF4B, IF4C, IF4D): Use EP.
1902 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1903 with immediate operand, "movhi". Tweak "ldsr".
1905 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1906 correct. Get sld.[bhw] and sst.[bhw] closer.
1908 * v850-opc.c (v850_operands): "not" is a two byte insn
1910 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1912 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1914 * v850-opc.c (two): Get order of words correct.
1916 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1918 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1919 register source and destination operands.
1920 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1922 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1923 same thinko in "trap" opcode.
1925 * v850-opc.c (v850_opcodes): Add initializer for size field
1928 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1929 Add D8 for 8-bit unsigned field in short load/store insns.
1930 (IF4A, IF4D): These both need two registers.
1931 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1932 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1933 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1934 for "ldsr" and "stsr".
1935 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1938 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1939 short store word (sst.w).
1941 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1943 * v850-opc.c (v850_operands): Added insert and extract fields,
1944 pointers to functions that handle unusual operand encodings.
1946 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1948 * v850-opc.c (v850_opcodes): Enable "trap".
1950 * v850-opc.c (v850_opcodes): Fix order of displacement
1951 and register for "set1", "clr1", "not1", and "tst1".
1953 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1955 * v850-opc.c (v850_operands): Add "B3" support.
1956 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1959 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1961 * v850-opc.c: Close unterminated comment.
1963 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1965 * v850-opc.c (v850_operands): Add flags field.
1966 (v850_opcodes): add move opcodes.
1968 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1970 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1971 * configure: (bfd_v850v_arch) Add new case.
1972 * configure.in: (bfd_v850_arch) Add new case.
1973 * v850-opc.c: New file.
1975 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1977 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1979 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1981 * d10v-opc.c: Add additional information to the opcode
1982 table to help determinine which instructions can be done
1985 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1987 * mpw-make.sed: Update editing of include pathnames to be
1990 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1992 * arm-opc.h: Added "bx" instruction definition.
1994 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1996 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1998 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2000 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2002 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2004 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2006 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2008 * makefile.vms: Update for alpha-opc changes.
2010 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2012 * i386-dis.c (print_insn_i386): Actually return the correct value.
2013 (ONE, OP_ONE): #ifdef out; not used.
2015 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2017 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2018 Changed subi operand type to treat 0 as 16.
2020 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2022 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2025 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2027 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2028 memory transfer instructions. Add new format string entries %h and %s.
2029 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2032 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2034 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2035 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2037 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2039 * alpha-dis.c (print_insn_alpha_osf): Remove.
2040 (print_insn_alpha_vms): Remove.
2041 (print_insn_alpha): Make globally visible. Chose the register
2042 names based on info->flavour.
2043 * disassemble.c: Always return print_insn_alpha for the alpha.
2045 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2047 * d10v-dis.c (dis_long): Handle unknown opcodes.
2049 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2051 * d10v-opc.c: Changes to support signed and unsigned numbers.
2052 All instructions with the same name that have long and short forms
2053 now end in ".l" or ".s". Divs added.
2054 * d10v-dis.c: Changes to support signed and unsigned numbers.
2056 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2058 * d10v-dis.c: Change all functions to use info->print_address_func.
2060 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2062 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2063 move ccr/sr insns more strict so that the disassembler only
2064 selects them when the addressing mode is data register.
2066 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2067 * d10v-opc.c (pre_defined_registers): Declare.
2068 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2069 to pick a better name for the registers.
2071 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2073 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2074 operands for fexpand and fpmerge. From Christian Kuehnke
2075 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2077 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2079 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2080 print routine. Take new regnames and cpumask arguments.
2081 Kill the environment variable nonsense.
2082 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2083 (print_insn_alpha_vms): New function. Do VMS style regnames.
2084 * disassemble.c (disassembler): Test bfd flavour to pick
2085 between OSF and VMS routines. Default to OSF.
2087 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2089 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2090 * configure: Rebuild.
2091 * Makefile.in (install): Use @INSTALL_SHLIB@.
2093 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2095 * configure: (bfd_d10v_arch) Add new case.
2096 * configure.in: (bfd_d10v_arch) Add new case.
2097 * d10v-dis.c: New file.
2098 * d10v-opc.c: New file.
2099 * disassemble.c (disassembler) Add entry for d10v.
2101 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2103 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2104 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2106 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2108 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2109 distinguish between variants of the instruction set.
2110 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2111 distinguish between variants of the instruction set.
2113 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2115 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2116 the 8086 instruction set.
2117 * i386-dis.c: General cleanups. Make most things static. Add
2118 prototypes. Get rid of static variables aflags and dflags. Pass
2119 them as args (to almost everything).
2121 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2123 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2125 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2127 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2128 if the next arg is marked with SRC_IN_DST. Gross.
2130 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2131 we're looking for and find EXR.
2133 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2134 if we're looking for KBIT and we don't find it.
2136 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2139 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2140 3bit immediate operands.
2142 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2144 * Released binutils 2.7.
2146 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2147 <kkaempf@progis.ac-net.de>.
2149 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2151 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2153 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2155 * sparc-dis.c (print_insn_sparclite): New routine to print
2156 sparclite instructions.
2158 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2160 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2162 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2164 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2165 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2166 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2168 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2170 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2171 Use autoconf-set values.
2172 (docdir, oldincludedir): Removed.
2173 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2175 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2177 * alpha-opc.c: New file.
2178 * alpha-opc.h: Remove.
2179 * alpha-dis.c: Complete rewrite to use new opcode table.
2180 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2181 * configure: Rebuild with autoconf 2.10.
2182 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2183 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2185 (alpha-opc.o): New target.
2187 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2189 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2190 Set imm_added_to_rs1 even if the source and destination register
2193 * sparc-opc.c: Add some two operand forms of the wr instruction.
2195 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2197 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2200 * disassemble.c (disassembler): Handle H8/S.
2201 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2203 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2205 * sparc-opc.c: Add beq/teq as aliases for be/te.
2207 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2208 <sergei@msil.sps.mot.com>.
2210 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2212 * makefile.vms: New file.
2214 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2216 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2218 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2221 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2223 * i386-dis.c (OP_OFF): Call append_prefix.
2225 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2227 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2228 unsigned long to silence a warning from the Solaris PowerPC
2231 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2233 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2235 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2237 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2239 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2240 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2241 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2242 cpush, cpusha, cpull sparclet insns.
2244 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2246 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2248 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2250 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2251 Set F_FLOAT on other floating point instructions.
2253 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2255 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2257 (powerpc_opcodes): Add 860/821 specific SPRs.
2259 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2261 * configure.in: Permit --enable-shared to specify a list of
2262 directories. Set and substitute BFD_PICLIST.
2263 * configure: Rebuild.
2264 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2265 uses. Set to @BFD_PICLIST@.
2267 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2269 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2270 not "abs", which may be needed for the absolute in something
2271 like btst #0,@10:8. Print L_3 immediates separately from other
2272 immediates. Change ABSMOV reference to ABS8MEM.
2274 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2276 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2277 (current_arch_mask): New static global.
2278 (compute_arch_mask): New static function.
2279 (print_insn_sparc): Delete sparc_v9_p. New static local
2280 current_mach. Resort opcode table if current_mach changes.
2281 Generalize "insn not supported" test.
2282 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2283 Delete test for v9/!v9.
2284 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2286 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2287 (brfcx): Renamed to FBRX.
2288 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2289 coprocessor mnemonics are not supported on the sparclet).
2290 (condf): Renamed to CONDF.
2291 (SLCBCC2): Delete F_ALIAS flag.
2293 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2295 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2296 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2298 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2300 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2301 that the shared library version number is set correctly.
2303 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2305 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2306 Miles Bader <miles@gnu.ai.mit.edu>.
2307 * configure: Rebuild.
2309 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2311 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2314 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2316 * configure: Rebuild with autoconf 2.8.
2318 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2320 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2321 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2323 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2325 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2326 since they appear as targets in Makefile.in.
2327 * configure: Rebuild.
2329 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2331 * mpw-make.sed: Edit out shared library support bits.
2333 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2335 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2336 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2337 (sparc_opcodes): Add sparclet insns.
2338 (sparclet_cpreg_table): New static local.
2339 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2340 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2342 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2344 * i386-dis.c (index16): New static variable.
2345 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2347 (OP_indirE): Return result of OP_E.
2348 (OP_E): Check for 16 bit addressing mode, and disassemble
2349 correctly. Optimised 32 bit case a little. Don't print
2350 "(base,index,scale)" when sib specifies only an offset.
2352 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2354 * configure.in: Set and substitute SHLIB_DEP.
2355 * configure: Rebuild.
2356 * Makefile.in (SHLIB_DEP): New variable.
2357 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2358 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2359 COMMON_SHLIB, add them to piclist with appropriate modifications.
2360 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2361 here: just use piclist.
2363 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2365 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2366 (print_insn_sparc): Rewrite v9/not-v9 tests.
2367 (compare_opcodes): Likewise.
2368 * sparc-opc.c (MASK_<ARCH>): Define.
2369 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2370 (sparclet,v6notv9): Define.
2371 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2372 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2374 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2376 * configure.in: Call AC_PROG_CC before configure.host.
2377 * configure: Rebuild.
2379 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2381 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2383 * i386-dis.c (onebyte_has_modrm): New static array.
2384 (twobyte_has_modrm): New static array.
2385 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2387 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2389 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2392 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2394 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2397 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2399 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2400 m68010up, not just m68020up | cpu32.
2402 * Makefile.in (SONAME): New variable.
2403 ($(SHLINK)): Make a link to the transformed name, as well.
2404 (stamp-tshlink): New target.
2405 (install): Skip stamp-tshlink during install.
2407 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2409 * configure.in: Call AC_ARG_PROGRAM.
2410 * configure: Rebuild.
2411 * Makefile.in (program_transform_name): New variable.
2412 (install): Transform library name before installing it.
2414 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2416 * i960-dis.c (mem): Add HX dcinva instruction.
2418 Support for building as a shared library, based on patches from
2419 Alan Modra <alan@spri.levels.unisa.edu.au>:
2420 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2421 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2422 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2423 * configure: Rebuild.
2424 * Makefile.in (ALLLIBS): New variable.
2425 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2426 (COMMON_SHLIB, SHLINK): New variables.
2427 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2428 (STAGESTUFF): Remove variable.
2429 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2430 (stamp-piclist, piclist): New targets.
2431 ($(SHLIB), $(SHLINK)): New targets.
2432 ($(OFILES)): Depend upon stamp-picdir.
2433 (disassemble.o): Build twice if PICFLAG is set.
2434 (MOSTLYCLEAN): Add pic/*.o.
2435 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2436 (distclean): Remove pic and stamp-picdir.
2437 (install): Install shared libraries.
2438 (stamp-picdir): New target.
2440 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2442 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2443 Print unknown instruction as "unknown", rather than in hex.
2445 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2447 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2449 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2451 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2453 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2455 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2456 when necessary. From Ulrich Drepper
2457 <drepper@myware.rz.uni-karlsruhe.de>.
2459 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2461 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2462 sparc_num_opcodes. Update architecture enum values.
2463 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2464 (sparc_opcode_lookup_arch): New function.
2465 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2466 (sparc_opcodes): Add v9a shutdown insn.
2468 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2470 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2471 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2473 (print_insn_sparc64): Deleted.
2474 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2477 * sparc-opc.c (architecture_pname): Add v9a.
2479 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2481 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2482 incorrectly defined as 0x16 when it should be 0x15.
2483 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2484 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2485 excb (exception barrier) which is defined in the Alpha
2486 Architecture Handbook version 2.
2487 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2488 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2489 disassembled as or, for example.
2491 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2493 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2494 (_print_insn_mips): Change i from int to unsigned int.
2496 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2498 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2499 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2501 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2503 * i386-dis.c: Added Pentium Pro instructions.
2505 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2507 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2510 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2512 * sh-opc.h (sh_nibble_type): Added REG_B.
2513 (sh_arg_type): Added A_REG_B.
2514 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2516 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2518 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2520 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2522 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2524 * Makefile.in (distclean): Remove stamp-h. From Ronald
2525 F. Guilmette <rfg@monkeys.com>.
2527 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2529 From David Mosberger-Tang <davidm@azstarnet.com>:
2530 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2533 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2535 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2536 (sh_table): Added many SH3 opcodes.
2537 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2539 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2541 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2542 (subco,subco.): Mark this PPC, not PPCCOM.
2544 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2546 * configure: Rebuild with autoconf 2.7.
2548 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2550 * configure: Rebuild with autoconf 2.6.
2552 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2554 * configure.in: Sort list of architectures. Accept but do nothing
2555 for alliant, convex, pyramid, romp, and tahoe.
2557 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2559 * a29k-dis.c (print_special): Change num to unsigned int.
2561 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2563 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2566 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2568 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2569 * configure: Rebuilt.
2571 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2573 * configure.in: Add case for bfd_i860_arch.
2574 * configure: Rebuild.
2576 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2578 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2579 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2580 (NEXTDOUBLE): Likewise.
2581 (print_insn_m68k): Don't match fmoveml if there is more than one
2582 register in the list.
2583 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2585 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2587 * m68k-opc.c: Use #W rather than #w.
2588 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2590 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2592 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2593 and likewise for all the dbxx opcodes.
2595 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2597 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2599 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2601 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2602 the VR4100 specific instructions to the mips_opcodes structure.
2604 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2606 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2607 ugly Metrowerks bug in CW6, is fixed in CW7.
2609 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2611 * ppc-opc.c (whole file): Add flags for common/any support.
2613 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2615 * Makefile.in (BISON): Remove macro.
2616 (FLAGS_TO_PASS): Remove BISON.
2618 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2620 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2622 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2623 instructions that take no args by looking at the match mask.
2624 (print_insn_arg): Always print "%" before register names.
2625 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2626 [case '_']: Don't print "@#" before address.
2627 [case 'J']: Use "%s" as format string, not register name.
2628 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2630 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2632 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2635 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2637 From David Mosberger-Tang <davidm@azstarnet.com>
2639 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2640 (alpha_insn_set): added definitions for VAX floating point
2641 instructions (Unix compilers don't generate these, but handcoded
2642 assembly might still use them).
2644 * alpha-dis.c (print_insn_alpha): added support for disassembling
2645 the miscellaneous instructions in the Alpha instruction set.
2647 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2649 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2650 no longer create sysdep.h, sed ppc-opc.c to work around a
2651 serious Metrowerks C bug.
2652 * mpw-make.in: Remove.
2653 * mpw-make.sed: New file, used by mpw-configure to edit
2654 Makefile.in into an MPW makefile.
2656 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2658 * Makefile.in (maintainer-clean): New synonym for realclean.
2660 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2662 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2663 which use '0', '1', and '2' instead. Specify the proper size for
2664 a pmove immediate operand. Correct the pmovefd patterns to be
2665 moves to a register, not from a register.
2666 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2668 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2670 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2671 %psr, %wim, %tbr as F_NOTV9.
2673 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2675 * Makefile.in (Makefile): Just rebuild Makefile when running
2677 (config.h, stamp-h): New targets.
2678 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2679 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2680 rebuilding config.h.
2681 * configure: Rebuild.
2683 * mips-opc.c: Change unaligned loads and stores with "t,A"
2684 operands to use "t,A(b)".
2686 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2688 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2690 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2692 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2693 until 3 instead of until 2.
2695 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2697 * Makefile.in (ALL_CFLAGS): Define.
2698 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2699 (MOSTLYCLEAN): Add config.log.
2700 (distclean): Don't remove config.log.
2701 * configure.in: Substitute HDEFINES.
2702 * configure: Rebuild.
2704 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2706 * sh-opc.h (sh_arg_type): Add F_FR0.
2707 (sh_table, case fmac): Add F_FR0 as first argument.
2709 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2711 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2713 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2715 * sparc-dis.c: Remove all references to NO_V9.
2717 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2719 * aclocal.m4: Just include ../bfd/aclocal.m4.
2720 * configure: Rebuild.
2722 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2724 * sparc-dis.c (X_DISP19): Define.
2725 (print_insn, case 'G'): Use it.
2726 (print_insn, case 'L'): Sign extend displacement.
2728 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2730 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2731 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2732 host_makefile_frag or frags.
2733 * aclocal.m4: New file.
2734 * configure: Rebuild.
2735 * Makefile.in (INSTALL): Set to @INSTALL@.
2736 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2737 (INSTALL_DATA): Set to @INSTALL_DATA@.
2739 (AR_FLAGS): Set to rc rather than qc.
2740 (CC): Define as @CC@.
2741 (CFLAGS): Set to @CFLAGS@.
2742 (@host_makefile_frag@): Remove.
2743 (config.status): Remove dependency upon @frags@.
2745 * configure.in: ../bfd/config.bfd now just sets shell variables.
2746 Use them rather than looking through target Makefile fragments.
2747 * configure: Rebuild.
2749 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2751 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2753 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2755 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2756 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2759 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2760 (lookup_{name,value}): New functions.
2761 (prefetch_table): New static local.
2762 (sparc_{encode,decode}_prefetch): New functions.
2763 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2765 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2767 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2770 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2772 * sh-dis.c: Correct comment on first line of file.
2774 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2776 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2778 * sparc-opc.c (asi, membar): New static locals.
2779 (sparc_{encode,decode}_{asi,membar}): New functions.
2780 (sparc_opcodes, membar insn): Fix.
2781 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2782 Support decoding of membar masks.
2785 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2787 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2789 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2791 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2792 and likewise for the other branches. Add bhs as an alias for bcc,
2793 and likewise for the size variants. Add dbhs as an alias for
2796 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2798 * sh-opc.h (FP sts instructions): Update to match reality.
2800 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2802 * m68k-dis.c: (fpcr_names): Add % before all register names.
2803 (reg_names): Likewise.
2804 (print_insn_arg): Don't explicitly print % before register names.
2805 Add % before register names in static array names. In case 'r',
2806 print data registers as `@(Dn)', not `Dn@'. When printing a
2807 memory address, don't print @# before it.
2808 (print_indexed): Change base_disp and outer_disp from int to
2809 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2810 syntax. Sign extend 8 byte displacement correctly.
2811 (print_base): Print using MIT syntax. Print zpc when appropriate.
2812 Change parameter disp from int to bfd_vma.
2814 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2817 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2819 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2820 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2821 * sh-opc.h (sh_arg_type): Add new operand types.
2822 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2824 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2826 * Makefile.in (distclean): Remove generated file config.h.
2828 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2830 * Makefile.in (distclean): Remove generated file config.h.
2832 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2834 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2836 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2838 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2839 rather than numopcodes. Use m68k_opcodes rather than removed
2840 opcode function. Don't check F_ALIAS.
2841 (print_insn_arg): Change first parameter to be const char *.
2842 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2843 (m68k-opc.o): New target.
2844 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2845 * configure: Rebuild.
2847 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2849 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2850 (opcode_bits, opcode_hash_table): New variables.
2851 (opcodes_initialized): Renamed from opcodes_sorted.
2852 (build_hash_table): New function.
2853 (is_delayed_branch): Use hash table.
2854 (print_insn): Renamed from print_insn_sparc, made static.
2855 Build and use hash table. If !sparc64, ignore sparc64 insns,
2856 and vice-versa if sparc64.
2857 (print_insn_sparc, print_insn_sparc64): New functions.
2858 (compare_opcodes): Move sparc64 opcodes to end.
2859 Print commutative insns with constant second.
2860 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2862 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2864 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2865 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2866 avoids printing a delay slot in a delay slot.
2867 * sh-opc.h (sh_table): Fully bracket last entry.
2869 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2871 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2873 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2875 * configure.in: Get host_makefile_frag from ${srcdir}.
2877 * configure.in: Autoconfiscated. Check for string[s].h. Create
2878 config.h from config.in. Don't set up sysdep.h link.
2879 * sysdep.h: New file.
2880 * configure, config.in: New files, generated from configure.in.
2881 * Makefile.in: Updated to be processed autoconf-style.
2882 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2883 (Makefile): Depend on config.status.
2884 (config.status): New rule.
2885 * configure.bat: Update Makefile substitutions.
2887 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2889 * mips-opc.c (L1): Define.
2890 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2891 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2894 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2896 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2897 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2898 have multiple add units but only a single logical unit.
2900 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2901 shifted by 18, without any insertion or extraction function.
2902 (insert_cr, extract_cr): Remove.
2904 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2906 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2909 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2911 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2912 * sh-opc.h: Add copyright.
2914 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2916 * Makefile.in (crunch-m68k): Delete extra target accidentally
2917 checked in a while ago.
2919 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2921 * sh-opc.h (sh_table): Add SH3 support.
2923 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2925 * sh-opc.h: Added bsrf and braf.
2927 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2929 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2930 bogus [ls]fm{ea,fd} patterns.
2932 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2933 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2934 initialize it from memory. Make function static.
2935 (print_insn_{big,little}_arm): New functions.
2936 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2937 the correct endianness.
2939 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2941 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2944 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2946 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2947 17th, so that it builds again using GCC as the compiler.
2949 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2951 * mips-dis.c (print_insn_little_mips): Cast return value from
2952 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2953 expects an unsigned long, and that might be fewer words of
2954 argument storage (e.g., if bfd_vma is long long on a 32-bit
2956 (print_insn_big_mips): Likewise with bfd_getb32 value.
2957 (_print_insn_mips): Now static.
2959 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2961 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2962 gcc memory hog problem with initializer is fixed.
2964 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2966 Merge in support for Mac MPW as a host.
2967 (Old change descriptions retained for informational value.)
2969 * mpw-config.in (archname): Compute from the config.
2970 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2972 * mpw-config.in (target_arch): Compute from canonical target.
2973 (m68k, mips, powerpc, sparc): Add architectures.
2974 * mpw-make.in (disassemble.c.o): Add.
2975 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2977 * mpw-config.in (BFD_MACHINES): Set to a default value.
2978 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2980 * mpw-make.in (CSEARCH): Add extra-include to search path.
2982 * mpw-config.in (varargs.h): Don't create.
2983 (sysdep.h): Create using forward-include.
2984 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2986 * mpw-config.in: New file, MPW version of configure.in.
2987 * mpw-make.in: New file, MPW version of Makefile.in.
2989 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2991 * alpha-dis.c (print_insn_alpha): Put empty statement after
2994 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2996 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2997 (low_sign_extend): Likewise.
2998 (get_field): Delete unused function.
2999 (set_field, deposit_14, deposit_21): Likewise.
3001 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3003 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3006 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3008 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3010 * alpha-opc.h (OSF_ASMCODE): define
3011 print pal-code names as defined in App C of the
3012 Alpha Architecture Reference Manual
3014 * alpha-dis.c: cleaned up output
3015 print stylized code forms as defined in App A.4.3 of the
3016 Alpha Architecture Reference Manual
3018 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3020 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3022 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3025 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3027 * m68k-dis.c (opcode): New function. Returns address of opcode
3028 table entry given index, even if the opcode table was split to
3029 work around gcc bugs.
3030 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3032 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3033 (reg_names): Now const.
3034 (print_insn_arg): Arrays cacheFieldName and names now const.
3035 (print_indexed): Array scales now const.
3037 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3039 * ppc-opc.c: Sort recently added instructions by minor opcode
3040 number within major opcode number.
3042 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3044 * hppa-dis.c: Include libhppa.h.
3046 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3048 * mips-opc.c: Change dli to use M_DLI, and add dla.
3050 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3052 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3054 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3056 * mips-opc.c: Add r4650 mul instruction.
3058 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3060 * mips-opc.c: Add uld and usd macros for unaligned double load and
3063 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3065 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3066 mfdcr, mtdcr, icbt, iccci.
3068 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3070 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3071 signed char fields to shorts, more portable.
3073 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3075 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3076 char fields as signed chars, since they may have negative values.
3078 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3080 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3081 (mycroft@netbsd.org).
3083 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3085 From "Logg, Ed" <elogg@ea.com>:
3086 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3087 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3090 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3092 * ppc-opc.c: Changes based on patch from David Edelsohn
3093 <edelsohn@mhpcc.edu>.
3094 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3097 (insert_tbr): New static function.
3098 (extract_tbr): New static function.
3099 (XFXFXM_MASK, XFXM): Define.
3100 (XSPRBAT_MASK, XSPRG_MASK): Define.
3101 (powerpc_opcodes): Add instructions to access special registers by
3102 name. Add mtcr and mftbu.
3104 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3106 * mips-opc.c (P3): Define.
3107 (mips_opcodes): Add mad and madu.
3109 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3111 * configure.in: Add W65 support.
3112 * disassemble.c: Likewise.
3113 * w65-opc.h, w65-dis.c: New files.
3115 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3117 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3120 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3122 * mips-opc.c: Add dli as a synonym for li.
3124 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3126 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3127 print something for reserved opcode values, even if it won't
3130 * mips-dis.c (_print_insn_mips): When initializing, shift right
3131 and mask, to avoid sign extension problems on the Alpha.
3133 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3136 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3138 * sh-opc.h (mov.l gbr): Get direction right.
3139 * sh-dis.c (print_insn_shx): New function.
3140 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3141 print opcodes with right byte order.
3143 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3145 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3146 to avoid conflicts with getopt.
3148 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3150 * hppa-dis.c (print_insn_hppa): Read the instruction using
3151 bfd_getb32, so that it works on a little endian or 64 bit host.
3152 Remove unused local variable op.
3154 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3156 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3157 addu does not work correctly if -mips3.
3159 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3161 * a29k-dis.c (print_special): Add special register names defined
3162 on 29030, 29040 and 29050.
3163 (print_insn): Handle new operand type 'I'.
3165 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3167 * Makefile.in (INSTALL): Use top level install.sh script.
3169 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3171 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3172 that it works on a little endian host.
3174 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3176 * configure.in: Use ${config_shell} when running config.bfd.
3178 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3180 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3182 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3184 * a29k-dis.c (print_insn): Print the opcode.
3186 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3188 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3190 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3192 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3194 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3196 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3197 which store a value into memory.
3199 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3201 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3202 * arm-dis.c, arm-opc.h: New files.
3204 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3206 * Makefile.in (ns32k-dis.o): Add dependency.
3207 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3208 string, not as array of chars.
3210 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3212 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3214 * sparc-opc.c: Added sparclite extended FP operations, and
3215 versions of v9 impdep* instructions permitting specification of
3218 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3220 * i960-dis.c (reg_names): Now const.
3221 (struct sparse_tabent): New type, copied from array type in mem
3223 (ctrl): Local static array ctrl_tab now const.
3224 (cobr): Local static array cobr_tab now const.
3225 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3226 static variable mem_tab no longer explicitly initialized. Changed
3227 mem_init to const array of struct sparse_tabent.
3228 (reg): Local static variable reg_tab no longer explicitly
3229 initialized. Changed reg_init to const array of struct
3231 (ea): Local static array scale_tab now const.
3233 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3236 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3238 * configure.bat: the disassember needs to be enabled for
3239 "objdump -d" to work in djgpp.
3241 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3243 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3244 (invalid_float): Enabled general version, doesn't require running
3245 on ns32k host. Changed to take char* argument, and test for
3246 explicitly specified sizes, instead of using sizeof() on host CPU
3248 (INVALID_FLOAT): Cast first argument.
3249 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3250 list_P032, list_M032): Now const.
3251 (optlist, list_search): Made appropriate arguments now point to
3253 (print_insn_arg): Changed static array of one-character-string
3254 pointers into a static const array of characters; fixed sprintf
3255 statement accordingly.
3257 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3259 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3260 from distribution. A ns32k-dis.c from a previous distribution has
3261 been brought up to date and supports the new interface.
3263 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3265 * configure.in: add bfd_ns32k_arch target support.
3267 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3268 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3270 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3272 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3275 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3277 * h8300-dis.c, mips-dis.c: Don't use true and false.
3279 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3281 * configure.in: Change --with-targets to --enable-targets.
3283 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3285 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3286 opcodes to the first instruction with that opcode, to speed
3287 disassembly of large files. From ralphc@pyramid.com (Ralph
3290 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3292 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3294 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3296 * configure.bat: update to latest makefile.in
3298 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3300 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3301 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3302 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3303 slot insn is in a delay slot.
3304 * z8k-opc.h: (resflg): Fix patterns.
3305 * h8500-opc.h Fix CR insn patterns.
3307 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3309 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3310 "cmpl" before POWER versions, so that gas -many uses them.
3312 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3314 * disassemble.c: New file.
3315 * Makefile.in (OFILES): Add disassemble.o.
3316 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3317 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3318 binutils/configure.in.
3320 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3321 opcode being examined.
3323 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3325 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3326 (insert_ral, insert_ram, insert_ras): New functions.
3327 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3328 RAS for store with update.
3330 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3332 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3333 (edelsohn@npac.syr.edu).
3335 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3337 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3340 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3342 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3344 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3346 * ppc-opc.c (powerpc_operands): The signedp field has been
3347 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3348 instead. Add new operand SISIGNOPT.
3349 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3350 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3351 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3354 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3356 * i386-dis.c (struct private): Renamed to dis_private. `private'
3357 is a reserved word for dynix cc.
3359 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3361 * configure.in: Change error message to refer to bfd/config.bfd
3362 rather than bfd/configure.in.
3364 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3366 * ppc-opc.c: Define POWER2 as short alias flag.
3367 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3370 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3372 * i960-dis.c (print_insn_i960): Don't read a second word for
3373 opcodes 0, 1, 2 and 3.
3375 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3377 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3379 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3381 * m68881-ext.c: Removed; no longer used.
3382 * Makefile.in: Changed accordingly.
3384 * m68k-dis.c (ext_format_68881): Don't declare.
3385 (print_insn_m68k): If an instruction uses place 'i', it uses at
3386 least four fixed bytes.
3387 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3388 extended float, convert to double using floatformat_to_double, not
3389 ieee_extended_to_double, and fetch the data before converting it.
3391 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3393 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3394 davidj@ICSI.Berkeley.EDU (David Johnson).
3396 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3398 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3399 PowerPC uses bdnz[l][a].
3401 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3403 * dis-buf.c, i386-dis.c: Include sysdep.h.
3405 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3407 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3409 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3410 by Motorola PowerPC 601 with PPC_OPCODE_601.
3411 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3412 Disassemble Motorola PowerPC 601 instructions as well as normal
3413 PowerPC instructions.
3415 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3417 * i960-dis.c (reg, mem): Just use a static array instead of
3420 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3422 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3423 condition name index if this is for a negated condition.
3425 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3426 Floating point format for 'H' operand is backwards from normal
3427 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3428 operands (fmpyadd and fmpysub), handle bizarre register
3429 translation correctly for single precision format.
3431 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3432 or 'I' operands if the next format specifier is 'M' (fcmp
3433 condition completer).
3435 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3437 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3438 single number giving a bitmask for the MB and ME fields of an M
3439 form instruction. Change NB to accept 32, and turn it into 0;
3440 also turn 0 into 32 when disassembling. Seperated SH from NB.
3441 (insert_mbe, extract_mbe): New functions.
3442 (insert_nb, extract_nb): New functions.
3443 (SC_MASK): Mask out SA and LK bits.
3444 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3445 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3446 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3447 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3448 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3449 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3450 (powerpc_macros): Define table of macro definitions.
3451 (powerpc_num_macros): Define.
3453 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3454 if PPC_OPERAND_NEXT is set.
3456 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3458 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3459 char. Retrieve contents using bfd_getl32 instead of shifting.
3461 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3463 * ppc-opc.c: New file. Opcode table for PowerPC, including
3464 opcodes for POWER (RS/6000).
3465 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3466 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3467 (CFILES): Add ppc-dis.c.
3468 (ppc-dis.o, ppc-opc.o): New targets.
3469 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3471 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3473 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3474 No space before 'u', 'f', or 'N'.
3476 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3478 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3479 farther than we should.
3481 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3483 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3485 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3487 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3489 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3490 needs it, to prevent reading past the end of a section.
3492 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3494 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3495 Removed t,A case for la; always use t,A(b) case.
3497 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3499 From Ted Lemen <mellon@pepper.ncd.com>
3500 * mips-dis.c (print_insn_arg): Handle 'k'.
3501 * mips-opc.c: Make cache use k, not t.
3503 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3505 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3506 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3507 FLOAT_FORMAT_CODE to put out floating point register names.
3509 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3511 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3513 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3515 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3517 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3519 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3520 larger than 32. Moved dsxx32 variants first for disassembler.
3522 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3524 * z8kgen.c, z8k-opc.h: Add full lda information.
3526 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3528 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3529 movb instructions. Any necessary space will be emitted by
3530 the code to handle nullification completers.
3532 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3534 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3536 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3538 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3539 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3541 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3543 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3545 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3547 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3548 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3550 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3552 * m88k-dis.c (m88kdis): comment change. Remove space after
3554 (printop): handle new arg types DEC and XREG for m88110.
3556 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3558 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3559 type for absolute branch addresses. Delete special
3560 "ble" and "be" code in 'W' operand code.
3562 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3564 * mips-opc.c: Set hazard information correctly for branch
3565 likely instructions.
3567 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3569 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3570 info->fprintf_func for printing and info->print_address_func for
3573 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3575 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3577 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3579 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3580 Corrected second case of "b" for disassembler.
3582 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3584 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3585 to BFD swapping routines to correspond to BFD name changes.
3587 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3589 * mips-opc.c: Change div machine instruction to be z,s,t rather
3590 than s,t. Change div macro to be d,v,t rather than d,s,t.
3591 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3592 rem and remu which generates only the corresponding div
3593 instruction. This is for compatibility with the MIPS assembler,
3594 which only generates the simple machine instruction when an
3595 explicit destination of $0 is used.
3596 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3598 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3600 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3601 WR_31 hazard for bal, bgezal, bltzal.
3603 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3605 * hppa-dis.c (print_insn_hppa): Use print function
3606 from within the disassemble_info, not fprintf_filtered.
3608 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3610 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3611 Law, law@cs.utah.edu.)
3613 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3615 * mips-opc.c ("absu"): Removed.
3618 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3620 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3621 Changed hazard information to distinguish between memory load
3622 delays and coprocessor load delays.
3624 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3626 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3628 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3630 * configure.in: Don't pass cpu to config.bfd.
3632 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3634 * m88k-dis.c (m88kdis): Make class unsigned.
3636 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3638 * alpha-dis.c (print_insn_alpha): One branch format case was
3639 missing the instruction name.
3641 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3643 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3644 Add the arch-specific auxiliary files.
3645 (OFILES): Remove the arch-specific auxiliary files
3646 and use BFD_MACHINES instead of DIS_LIBS.
3647 * configure.in: Set BFD_MACHINES based on --with-targets option.
3649 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3651 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3654 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3656 * sparc-opc.c: Change CONST to const to deal with gcc
3657 -Dconst=__const -traditional.
3659 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3661 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3662 coprocessor instructions out of #if 0, and made them use new
3665 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3667 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3669 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3671 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3672 instruction, for use by the disassembler.
3674 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3675 hand-coded sign extensions that depended on 32-bit host ints.
3676 FIXME, we still depend on big-endian host bitfield ordering.
3677 (sparc_print_insn): Set the insn_info_valid field, and the
3678 other fields that describe the instruction being printed.
3680 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3682 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3683 `jmp' instead of just one of them.
3685 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3687 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3688 (fput_fp_reg_r): Renamed from fput_reg_r.
3689 (fput_fp_reg): New function.
3690 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3692 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3694 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3696 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3698 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3700 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3701 don't output a space.
3703 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3705 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3707 * mips-opc.c: New file, containing opcode table from
3708 ../include/opcode/mips.h.
3709 * Makefile.in: Add it.
3711 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3713 * m88k-dis.c: New file, moved in from gdb and changed to use the
3714 new dis-asm.h disassembler interface.
3715 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3716 (m88k-dis.o): New target.
3718 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3720 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3721 argument string const char * to correspond to opcode/mips.h.
3723 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3725 * mips-dis.c: Updated to account for name changes in new version
3727 * Makefile.in: Added header file dependencies.
3729 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3731 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3733 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3735 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3736 extend, rather than shifts.
3738 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3740 * Makefile.in: Undo 15 June change.
3742 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3744 * m68k-dis.c (print_insn_arg): Change return value to byte count
3746 * m68k-dis.c: Re-write to detect invalid operands before
3747 printing anything, so we can handle this the same way we
3748 handle invalid opcodes.
3750 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3752 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3754 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3756 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3759 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3761 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3763 * configure.in: Do make sysdep.h link.
3764 * Makefile.in: Search ../include. Don't search ../bfd.
3766 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3768 Changes from Jeff Law, law@cs.utah.edu:
3769 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3770 Do not print a space before the completers specified by
3773 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3775 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3776 defined, since gdb has been fixed.
3778 Changes from Jeff Law, law@cs.utah.edu:
3779 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3780 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3781 be a *disassemble_info, not a *FILE.
3782 * hppa-dis.c: Support 'd', '!', and 'a'.
3783 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3784 * hppa-dis.c: Delete cases which are no longer needed.
3786 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3788 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3790 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3792 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3795 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3797 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3798 * configure.in: No longer need to configure to get sysdep.h.
3800 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3802 * Patches from Jeffrey Law <law@cs.utah.edu>.
3803 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3804 templates for 1.1 FP computational instructions.
3806 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3808 * h8500-dis.c (print_insn_h8500): Address argument is type
3810 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3813 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3814 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3816 * sparc-dis.c (compare_opcodes): Move static declaration to
3819 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3821 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3822 instruction, remove unimp hack from 'l' argument.
3824 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3826 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3829 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3831 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3832 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3835 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3837 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3838 arrays of string pointers to 2-d arrays of chars, to save
3841 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3843 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3844 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3846 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3848 * hppa-dis.c: New file from Utah, adapted to new disassembler
3850 * Makefile.in: Include it.
3852 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3854 * sh-dis.c, sh-opc.h: New files.
3856 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3858 * alpha-dis.c, alpha-opc.h: New files.
3860 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3862 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3865 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3867 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3869 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3871 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3874 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3876 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3877 and double percent signs a few places.
3879 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3881 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3882 Use info->print_address_func not print_address.
3884 * dis-buf.c (generic_print_address): New function.
3886 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3888 * Makefile.in: Add sparc-dis.c.
3889 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3891 Add `add' instruction to the set that get checked
3892 for a preceding `sethi' in order to print an absolute address.
3893 * (print_insn): Disassembly prefers real instructions.
3894 (is_delayed_branch): Speed up.
3895 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3896 Still missing some float ops, and needs testing.
3897 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3898 F_ALIAS. Use printf, not fprintf, when not passing a file
3900 (compare_opcodes): Check that identical instructions have
3901 identical opcodes, complain otherwise.
3904 * Include reg_names.
3906 Use dis-asm.h/read_memory_func interface.
3908 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3910 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3911 deliberately return non-zero to setjmp from longjmp. Otherwise
3912 this code fails to compile.
3914 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3916 * m68k-dis.c: Fix prototype for fetch_arg().
3918 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3920 * dis-buf.c: New file, for new read_memory_func interface.
3921 Makefile.in (OFILES): Include it.
3922 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3923 Use new read_memory_func interface.
3925 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3927 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3928 * h8500-opc.h: Fix couple of opcodes.
3930 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3932 * Makefile.in: add dvi & installcheck targets
3934 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3936 * Makefile.in: Update for h8500-dis.c.
3938 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3940 * h8500-dis.c, h8500-opc.h: New files
3942 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3944 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3945 ../include/dis-asm.h.
3946 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3947 and ../gdb/m68k-pinsn.c).
3948 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3949 and ../gdb/i386-pinsn.c).
3950 * m68881-ext.c: New file. Moved definition of
3951 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3952 * Makefile.in: Adjust for new files.
3953 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3954 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3955 can be dis-assembled.
3957 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3959 * mips-dis.c (print_insn_arg): Now returns void.
3961 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3963 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3964 files that use the macros.
3966 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3968 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3969 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3970 (CFILES): Added mips-dis.c.
3972 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3974 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3975 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3977 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3979 * Makefile.in: Improve *clean rules.
3980 * configure.in: Allow a default host.
3982 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3984 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3985 files include other sysdep files
3987 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3989 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3991 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3993 * configure.in: For host support, use ../bfd/configure.host
3994 so it stays in sync with the ../bfd/hosts database.
3996 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3998 * configure.in: use cpu-vendor-os triple instead of nested cases
4000 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4002 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4003 *always* the wrong one.
4005 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4007 * z8kgen.c: added copyright info
4009 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4011 * z8k-dis.c (unparse_instr): prettier tabs
4012 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4014 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4016 * configure.in: Add ncr* configuration.
4017 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4018 picayune ANSI compilers happy.
4020 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4022 * configure.in (i386): Make i386 and i486 synonymous for now.
4023 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4025 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4027 * Makefile.in (install): Fix typo.
4029 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4031 * Makefile.in (make): Remove obsolete crud.
4032 (sparc-opc.o): Avoid Sun Make VPATH bug.
4034 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4036 * Makefile.in: since there are no SUBDIRS, remove rule and
4037 references of subdir_do.
4039 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4041 * Makefile.in (install): Get the library name right here too.
4042 Don't install bfd.h, since it's unrelated to this library. No
4043 subdirs to recurse into, either.
4044 (CFILES): The source file has a .c suffix, not .o.
4046 * sparc-opc.c: New file, moved from BFD.
4047 * Makefile.in (OFILES): Build it.
4049 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4051 * z8k-dis.c: fixed forward refferences of some declarations.
4053 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4055 * Makefile.in: get the name of the library right
4057 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4059 * z8k-dis.c: knows how to disassemble z8k stuff
4060 * z8k-opc.h: new file full of z8000 opcodes
4064 version-control: never