1 2002-02-11 Alan Modra <amodra@bigpond.net.au>
3 * Makefile.am: "make dep-am".
4 * Makefile.in: Regenerate.
5 * aclocal.m4: Regenerate.
6 * config.in: Regenerate.
7 * configure: Regenerate.
9 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
11 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
12 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
14 * configure: Regenerate.
16 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
18 * cgen-dis.c: Add prototypes for count_decodable_bits
19 and add_insn_to_hash_chain.
21 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
23 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
26 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
28 * or32-opc.c: Fix compile time warning messages.
29 * or32-dis.c: Fix compile time warning messages.
31 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
34 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
35 * sh64-opc.c: Regenerate.
36 2001-03-13 DJ Delorie <dj@redhat.com>
37 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
38 purpose is more obvious.
39 * sh64-opc.c (shmedia_table): Ditto.
40 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
41 (print_insn_shmedia): Ditto.
42 2001-03-12 DJ Delorie <dj@redhat.com>
43 * sh64-opc.c: Adjust comments to reflect reality: replace bits
44 3:0 with zeros (not "reserved"), replace "rrrrrr" with
45 "gggggg" for two-operand floating point opcodes. Remove
47 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
48 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
49 Correct printing of .byte:s. Return number of printed bytes or
51 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
52 to next four-byte-alignment if insn or data is not aligned.
53 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
54 * sh64-dis.c: Update comments and fix comment formatting.
55 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
56 Abort instead of setting length to 0.
57 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
58 crange_bsearch_cmpl, sh64_get_contents_type,
59 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
60 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
61 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
62 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
63 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
64 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
65 address with same prefix as SHcompact.
66 In the disassembler, use a .cranges section for linked executables.
67 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
68 and update for using structure in info->private_data.
69 (struct sh64_disassemble_info): New.
70 (is_shmedia_p): Delete.
71 (crange_qsort_cmpb): New function.
72 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
73 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
74 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
75 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
76 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
77 pair. Display addresses for linked executables only.
78 (print_insn_sh64x_media): Initialize info->private_data by calling
79 init_sh64_disasm_info.
80 (print_insn_sh64x): Ditto. Find out type of contents by calling
81 sh64_contents_type_disasm. Display data regions using ".long" and
82 ".byte" similar to unrecognized opcodes.
83 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
84 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
85 information in section flags before considering symbols. Don't
86 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
87 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
88 matching $target $canon_targets instead of looking at the
89 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
90 * configure: Regenerate.
91 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
92 * sh64-opc.c (shmedia_creg_table): New.
93 * sh64-opc.h (shmedia_creg_info): New type.
94 (shmedia_creg_table): Declare.
95 * sh64-dis.c (creg_name): New function.
96 (print_insn_shmedia): Use it.
97 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
98 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
99 print_insn_sh64l if little-endian.
100 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
101 (print_insn_sh64l): New.
102 (print_insn_sh64x): New.
103 (print_insn_sh64x_media): New.
104 (print_insn_sh64): Break out code to print_insn_sh64x and
105 print_insn_sh64x_media.
106 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
107 * sh64-opc.h: New file
108 * sh64-opc.c: New file
109 * sh64-dis.c: New file
110 * Makefile.am: Add sh64 targets.
111 (HFILES): Add sh64-opc.h.
112 (CFILES): Add sh64-opc.c and sh64-dis.c.
113 (ALL_MACHINES): Add sh64 files.
114 * Makefile.in: Regenerate.
115 * configure.in: Add support for sh64 to bfd_sh_arch.
116 * configure: Regenerate.
117 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
118 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
120 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
121 * po/POTFILES.in: Regenerate.
122 * po/opcodes.pot: Regenerate.
124 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
126 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
128 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
130 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
132 2002-02-01 Alan Modra <amodra@bigpond.net.au>
134 * Makefile.am: Run "make dep-am"
135 * Makefile.in: Regenerate.
137 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
139 * or32-dis.c: New file.
140 * or32-opc.c: New file.
141 * configure.in: Add support for or32.
142 * configure: Regenerate.
143 * Makefile.am: Add support for or32.
144 * Makefile.in: Regenerate.
145 * disassemble.c: Add support for or32.
146 * po/POTFILES.in: Regenerate.
147 * po/opcodes.pot: Regenerate.
149 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
151 * configure: Regenerated.
153 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
155 * po/fr.po: Updated version.
157 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
159 * po/es.po: Updated version.
161 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
163 * po/da.po: New version.
165 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
167 * po/da.po: New file: Spanish translation.
168 * configure.in (ALL_LINGUAS): Add da.
169 * configure: Regenerate.
171 2002-01-22 Graydon Hoare <graydon@redhat.com>
173 * fr30-asm.c: Regenerate.
174 * fr30-desc.c: Likewise.
175 * fr30-desc.h: Likewise.
176 * fr30-dis.c: Likewise.
177 * fr30-ibld.c: Likewise.
178 * fr30-opc.c: Likewise.
179 * fr30-opc.h: Likewise.
180 * m32r-asm.c: Likewise.
181 * m32r-desc.c: Likewise.
182 * m32r-desc.h: Likewise.
183 * m32r-dis.c: Likewise.
184 * m32r-ibld.c: Likewise.
185 * m32r-opc.c: Likewise.
186 * m32r-opc.h: Likewise.
187 * m32r-opinst.c: Likewise.
188 * openrisc-asm.c: Likewise.
189 * openrisc-desc.c: Likewise.
190 * openrisc-desc.h: Likewise.
191 * openrisc-dis.c: Likewise.
192 * openrisc-ibld.c: Likewise.
193 * openrisc-opc.c: Likewise.
194 * openrisc-opc.h: Likewise.
195 * xstormy16-desc.c: Likewise.
197 2002-01-22 Richard Henderson <rth@redhat.com>
199 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
202 2002-01-22 Alan Modra <amodra@bigpond.net.au>
204 * Makefile.am: Run "make dep-am".
205 * Makefile.in: Regenerate.
206 * opcodes/po/POTFILES.in: Regenerate.
208 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
210 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
211 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
213 2002-01-18 Keith Walker <keith.walker@arm.com>
215 * arm-opc.h (arm_opcodes): Add bxj instruction.
217 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
219 * po/opcodes.pot: Regenerate.
220 * po/fr.po: Regenerate.
221 * po/sv.po: Regenerate.
222 * po/tr.po: Regenerate.
224 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
226 * po/tr.po: Import new version.
228 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
230 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
231 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
234 2002-01-10 matthew green <mrg@redhat.com>
236 * xstormy16-asm.c: Regenerate.
237 * xstormy16-desc.c: Likewise.
238 * xstormy16-desc.h: Likewise.
239 * xstormy16-dis.c: Likewise.
240 * xstormy16-opc.c: Likewise.
241 * xstormy16-opc.h: Likewise.
243 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
245 * po/es.po: New file: Spanish translation.
246 * configure.in (ALL_LINGUAS): Add es.
247 * configure: Regenerate.
249 2001-12-31 Jeffrey A Law (law@redhat.com)
251 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
252 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
253 Always emit a space after 'H'.
255 2001-12-18 matthew green <mrg@redhat.com>
257 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
259 2001-12-17 Richard Henderson <rth@redhat.com>
261 * alpha-opc.c (unop): Encode with RB as $sp.
263 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
265 * Makefile.am: Add support for xstormy16.
266 * Makefile.in: Regenerate.
267 * configure.in: Add support for xstormy16.
268 * configure: Regenerate.
269 * disassemble.c: Add support for xstormy16.
270 * xstormy16-asm.c: New generated file.
271 * xstormy16-desc.c: New generated file.
272 * xstormy16-desc.h: New generated file.
273 * xstormy16-dis.c: New generated file.
274 * xstormy16-ibld.c: New generated file.
275 * xstormy16-opc.c: New generated file.
276 * xstormy16-opc.h: New generated file.
278 2001-12-06 Richard Henderson <rth@redhat.com>
280 * alpha-opc.c (alpha_opcodes): Add wh64en.
282 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
284 * d10v-opc.c (d10v_predefined_registers): Remove warnings
285 introduced in Nov 29's patch.
287 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
290 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
293 * d10v-opc.c (RSRC_NOSP): New macro.
294 (d10v_operands): Add it.
295 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
297 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
299 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
300 (RSRC_SP): New macro.
301 (d10v_operands): Add it.
302 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
304 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
306 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
307 Also, break out of the loop as soon as an instruction has been
310 2001-11-17 matthew green <mrg@redhat.com>
312 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
314 2001-11-15 Alan Modra <amodra@bigpond.net.au>
316 * po/POTFILES.in: Regenerate.
318 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
319 (insert_bat, extract_bat, insert_bba, extract_bba,
320 insert_bd, extract_bd, insert_bdm, extract_bdm,
321 insert_bdp, extract_bdp, valid_bo,
322 insert_bo, extract_bo, insert_boe, extract_boe,
323 insert_ds, extract_ds, insert_de, extract_de,
324 insert_des, extract_des, insert_li, extract_li,
325 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
326 insert_nb, extract_nb, insert_nsi, extract_nsi,
327 insert_ral, insert_ram, insert_ras,
328 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
329 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
330 (extract_bd, extract_bdm, extract_bdp,
331 extract_ds, extract_des,
332 extract_li, extract_nsi): Implement sign extension without conditional.
333 (insert_bdm, extract_bdm,
334 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
335 (extract_bdm, extract_bdp): Correct 32 bit validation.
336 (AT1_MASK, AT2_MASK): Define.
337 (BBOAT_MASK): Define.
338 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
339 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
340 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
341 (PPCCOM32, PPCCOM64): Define.
342 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
343 and add new patterns to implement 64 bit branches with hints. Move
344 booke instructions so they match before ppc64.
346 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
347 64 bit default targets, and parse "32" and "64" in options.
349 (print_insn_powerpc): Pass dialect to operand->extract.
351 2001-11-14 Dave Brolley <brolley@redhat.com>
353 * cgen-dis.c (count_decodable_bits): New function.
354 (add_insn_to_hash_chain): New function.
355 (hash_insn_array): Call add_insn_to_hash_chain.
356 (hash_insn_list): Call add_insn_to_hash_chain.
357 * m32r-dis.c: Regenerated.
358 * fr30-dis.c: Regenerated.
360 2001-11-14 Andreas Jaeger <aj@suse.de>
362 * i386-dis.c (print_insn): Use x86-64 as option.
364 2001-11-14 Alan Modra <amodra@bigpond.net.au>
366 * disassemble.c (disassembler): Call print_insn_i386.
367 * i386-dis.c (SUFFIX_ALWAYS): Define.
368 (struct dis_private): Add orig_sizeflag.
369 (print_insn_i386): Make it a wrapper, calling..
370 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
371 warning without using volatile by moving orig_sizeflag to priv,
372 and removing inbuf. Parse disassembler_options.
373 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
375 (putop): Remove #ifdef SUFFIX_ALWAYS.
377 2001-11-11 Timothy Wall <twall@alum.mit.edu>
379 * tic54x-dis.c: Use revised opcode structure. Export opcode
381 (has_lkaddr): Don't forget about Lmem insns.
382 * tic54x-opc.c: Add emulation trap. Parallel table now uses
383 standard opcode templates.
385 2001-11-13 Zack Weinberg <zack@codesourcery.com>
387 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
388 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
389 category instead of Ew.
391 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
393 * m68k-opc.c: Fix definitions of wddata[bwl].
395 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
397 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
398 fit in the buffer, try to match the empty keyword.
400 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
402 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
403 * fr30-ibld.c: Regenerate.
404 * m32r-ibld.c: Regenerate.
405 * openrisc-ibld.c: Regenerate.
407 2001-11-04 Chris Demetriou <cgd@broadcom.com>
409 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
411 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
413 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
414 * configure: Regernate.
415 * po/fr.po: New file.
416 * po/sv.po: New file.
417 * po/tr.po: New file.
419 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
421 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
424 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
426 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
428 * Makefile.in: Regenerate.
429 * mmix-dis.c, mmix-opc.c: New files.
431 2001-10-29 Kazu Hirata <kazu@hxi.com>
433 * d30v-dis.c: Fix a comment typo.
435 2001-10-23 Chris Demetriou <cgd@broadcom.com>
437 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
438 "bltzall" as writing GPR 31 (since they do).
440 * mips-dis.c (print_insn_arg): Calculate info->target
442 (print_insn_mips): Fill in instruction info.
443 (print_mips16_insn_arg): Remove unneded variable 'val'.
444 Removed duplicated instruction target calculations,
445 calculate once and print that result. Use same idiom for
446 masking the jump segment bits as is used in print_insn_arg.
448 2001-10-20 Alan Modra <amodra@bigpond.net.au>
450 * ppc-opc.c (CT): Make it an optional operand.
452 2001-10-17 Chris Demetriou <cgd@broadcom.com>
454 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
455 SB-1 binaries include instructions specific to the SB-1.
456 * mips-opc.c (SB1): New definition.
457 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
458 "recip.ps", "rsqrt.ps", and "sqrt.ps".
460 2001-10-17 matthew green <mrg@redhat.com>
462 * ppc-opc.c (STRM): New AltiVec operand.
463 (XDSS): New AltiVec instruction form.
464 (mtvscr): Correct operand list.
465 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
467 2001-10-17 Alan Modra <amodra@bigpond.net.au>
469 * po/POTFILES.in: Regenerate.
471 2001-10-13 matthew green <mrg@redhat.com>
473 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
474 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
475 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
477 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
479 * cgen-ibld.in: Include safe-ctype.h in preference to
481 * cgen-asm.in: Include safe-ctype.h in preference to
482 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
483 TOLOWER instead of tolower.
484 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
485 string elements in constructed regular expression.
486 * fr30-asm.c: Regenerate.
487 * fr30-desc.c: Regenerate.
488 * fr30-ibld.c: Regenerate.
489 * m32r-asm.c: Regenerate.
490 * m32r-desc.c: Regenerate.
491 * m32r-ibld.c: Regenerate.
492 * openrisc-asm.c: Regenerate.
493 * openrisc-desc.c: Regenerate.
494 * openrisc-ibld.c: Regenerate.
495 * po/opcodes.pot: Regenerate.
497 2001-10-12 matthew green <mrg@redhat.com>
499 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
500 instruction field instruction/extraction functions for new BookE
501 DE form instructions.
502 (CT): New macro for CT field in an X form instruction.
503 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
505 (PPC64): Don't include PPC_OPCODE_PPC.
506 (403): New opcode macro for PPC403 processors.
507 (BOOKE): New opcode macro for BookE processors.
508 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
509 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
510 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
511 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
512 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
513 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
514 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
515 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
516 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
517 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
518 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
519 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
520 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
521 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
523 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
524 for a disassembler option of `booke', `booke32' or `booke64' to enable
525 BookE support in the disassembler.
527 2001-10-12 John Healy <jhealy@redhat.com>
529 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
530 for the length when extracting the base part of the insn.
532 2001-10-09 Bruno Haible <haible@clisp.cons.org>
534 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
535 regular expression. Fix some formatting problems.
536 * fr30-asm.c: Regenerate.
537 * openrisc-asm.c: Regenerate.
538 * m32r-asm.c: Regenerate.
540 2001-10-09 Christian Groessler <cpg@aladdin.de>
542 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
543 of indirect register memory accesses to be same format the
546 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
548 * sh-opc.h: Fix encoding of least significant nibble of the
549 DSP single data transfer instructions.
551 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
554 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
556 * cgen-asm.in: Fix compile time warning messages in generated
558 * cgen-dis.in: The same.
559 * cgen-ibld.in: The same.
560 * fr30-asm.c: Regenerate.
561 * fr30-desc.c: Regenerate.
562 * fr30-dis.c: Regenerate.
563 * fr30-ibld.c: Regenerate.
564 * fr30-opc.c: Regenerate.
565 * m32r-asm.c: Regenerate.
566 * m32r-desc.c: Regenerate.
567 * m32r-dis.c: Regenerate.
568 * m32r-ibld.c: Regenerate.
569 * m32r-opc.c: Regenerate.
570 * m32r-opinst.c Regenerate.
571 * openrisc-asm.c: Regenerate.
572 * openrisc-desc.c: Regenerate.
573 * openrisc-dis.c: Regenerate.
574 * openrisc-ibld.c: Regenerate.
575 * openrisc-opc.c: Regenerate.
576 * openrisc-opc.h: Regenerate.
577 * Makefile.in: Regenerate.
578 * po/POTFILES.in: Regenerate.
579 * po/opcodes.pot: Regenerate.
581 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
583 * arm-opc.h (arm_opcodes): Add cirrus insns.
585 * arm-dis.c (print_insn_arm): Add 'I' case.
587 2001-10-03 Alan Modra <amodra@bigpond.net.au>
589 * po/POTFILES.in: Regenerate.
590 * configure: Regenerate.
592 2001-10-02 Alan Modra <amodra@bigpond.net.au>
594 * Makefile.am (Makefile): Depend on bfd/configure.in.
596 * Makefile.in: Regenerate.
598 2001-09-30 John Healy <jhealy@redhat.com>
600 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
601 calls to cgen_get_insn_value and cgen_put_insn_value calls.
602 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
604 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
606 * Makefile.am: Update dependencies with "make dep-am".
607 * Makefile.in: Regenerate.
609 2001-09-26 Alan Modra <amodra@bigpond.net.au>
611 * arc-dis.c: Formatting fixes.
612 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
614 2001-09-21 Bruno Haible <haible@clisp.cons.org>
616 * arc-dis.c: Don't include <ctype.h>.
617 * openrisc-desc.c: Likewise.
618 * openrisc-ibld.c: Likewise.
620 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
622 * fr30-opc.c: Fix compile time warning messages.
623 * i370-opc.c: Fix compile time warning messages.
624 * i960-dis.c: Fix compile time warning messages.
625 * m32r-asm.c: Fix compile time warning messages.
626 * m32r-desc.c: Fix compile time warning messages.
627 * m32r-dis.c: Fix compile time warning messages.
628 * m32r-ibld.c: Fix compile time warning messages.
629 * m32r-opc.c: Fix compile time warning messages.
630 * m32r-opinst.c: Fix compile time warning messages.
631 * ns32k-dis.c: Fix compile time warning messages.
632 * openrisc-asm.c: Fix compile time warning messages.
633 * openrisc-desc.c: Fix compile time warning messages.
634 * openrisc-dis.c: Fix compile time warning messages.
635 * openrisc-ibld.c: Fix compile time warning messages.
636 * openrisc-opc.c: Fix compile time warning messages.
637 * pdp11-dis.c: Fix compile time warning messages.
638 * tic54x-dis.c: Fix compile time warning messages.
639 * v850-opc.c: Fix compile time warning messages.
640 * vax-dis.c: Fix compile time warning messages.
641 * w65-opc.h: Fix compile time warning messages.
642 * z8k-opc.h: Fix compile time warning messages.
643 * z8kgen.c: Fix compile time warning messages.
645 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
647 * arm-dis.c: Fix compile time warning messages.
648 * cgen-asm.c: Fix compile time warning messages.
649 * cgen-dis.c: Fix compile time warning messages.
650 * cris-dis.c: Fix compile time warning messages.
651 * d10v-dis.c: Fix compile time warning messages.
652 * fr30-asm.c: Fix compile time warning messages.
653 * fr30-desc.c: Fix compile time warning messages.
654 * fr30-dis.c: Fix compile time warning messages.
655 * fr30-ibld.c: Fix compile time warning messages.
657 2001-09-18 Bruno Haible <haible@clisp.cons.org>
659 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
660 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
661 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
662 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
664 (cgen_keyword_add): Use ISALNUM instead of isalnum.
665 (hash_keyword_name): Use TOLOWER instead of tolower.
666 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
667 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
669 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
670 * fr30-desc.c: Don't include <ctype.h>.
671 * fr30-ibld.c: Likewise.
672 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
673 (load_insn_classes, parse_resource_users, load_depfile): Use
674 ISSPACE instead of isspace.
675 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
676 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
678 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
679 * m32r-desc.c: Don't include <ctype.h>.
680 * m32r-ibld.c: Likewise.
681 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
682 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
684 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
686 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
688 * Makefile.am: Add rules and dependencies to create the s/390 opcode
689 table out of s390-opc.txt automatically.
690 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
691 * s390-mkopc.c (dumpTable): Change output to create a complete file.
692 * s390-opc.c: New improved opcode format macros and remove the
693 pregenerated opcode table.
694 * s390-opc.txt: Adapt to new improved opcode format macros.
696 2001-09-14 David Schleef <ds@schleef.org>
698 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
700 2001-09-04 Alan Modra <amodra@bigpond.net.au>
702 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
703 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
705 2001-08-31 Eric Christopher <echristo@redhat.com>
706 Jason Eckhardt <jle@redhat.com>
708 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
709 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
712 2001-08-31 Andreas Jaeger <aj@suse.de>
714 * tic54x-opc.c: Add default initializers to avoid warnings.
716 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
717 * arc-ext.c: Likewise.
719 2001-08-28 matthew gren <mrg@redhat.com>
721 * ppc-opc.c (icbt): Order correctly.
723 2001-08-27 David Edelsohn <dje@watson.ibm.com>
724 Torbjorn Granlund <tege@swox.com>
726 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
728 (insert_ds): Complain if not a multiple of 4.
730 (XSYNC_MASK): Define.
731 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
732 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
734 2001-08-26 Andreas Jaeger <aj@suse.de>
736 * h8500-opc.h: Add default initializers to h8500_table to shut up
739 2001-08-25 Andreas Jaeger <aj@suse.de>
741 * tic54x-dis.c: Add unused attributes where needed.
743 * z8k-dis.c (output_instr): Add unused attribute.
745 * h8300-dis.c: Add missing prototypes.
746 (bfd_h8_disassemble): Make static.
748 * cris-dis.c: Add missing prototype.
749 * h8500-dis.c: Likewise.
750 * m68hc11-dis.c: Likewise.
751 * pj-dis.c: Likewise.
752 * tic54x-dis.c: Likewise.
753 * v850-dis.c: Likewise.
754 * vax-dis.c: Likewise.
755 * w65-dis.c: Likewise.
756 * z8k-dis.c: Likewise.
758 * d10v-dis.c: Add missing prototype.
759 (dis_long): Remove unused variable.
760 (dis_2_short): Likewise.
762 * sh-dis.c: Add missing prototypes.
763 * v850-opc.c: Likewise.
764 Add unused attributes where needed.
766 * ns32k-dis.c: Add missing prototypes.
767 (bit_extract_simple): Remove unused variable.
769 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
771 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
772 branch instructions for gcc 3.0.
773 * opcodes/s390-opc.txt: Likewise.
775 2001-08-21 Andreas Jaeger <aj@suse.de>
777 * i960-dis.c: Add parameters for prototypes
778 (ctrl): Add unused attributes.
782 * mips-dis.c: Add missing prototypes.
783 * a29k-dis.c: Likewise.
784 * arc-dis.c: Likewise.
785 * ia64-opc.c: Likewise.
787 * s390-dis.c: Add missing prototypes.
788 (init_disasm): Remove unused attribute since the parameter is
791 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
793 * mips-opc.c (M1): Define. Reformatted Code.
794 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
797 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
799 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
800 the corresponding non-likely insn is in MIPS I.
802 2001-08-13 Kazu Hirata <kazu@hxi.com>
804 * mcore-dis.c: Fix formatting.
805 * mips-dis.c: Likewise.
806 * pj-dis.c: Likewise.
807 * z8k-dis.c: Likewise.
809 2001-08-12 Richard Henderson <rth@redhat.com>
811 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
812 to *VALUEP. Regenerate all cgen files.
814 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
816 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
818 * mips-opc.c (G6): Undefine.
819 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
820 as the first "move" alternative.
822 2001-08-10 Andreas Jaeger <aj@suse.de>
824 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
826 * configure: Regenerate.
828 2001-08-10 Alan Modra <amodra@bigpond.net.au>
830 * ppc-opc.c: Revert 2001-08-08.
832 2001-08-09 Alan Modra <amodra@bigpond.net.au>
834 * dis-buf.c (generic_strcat_address): Add missing prototype.
835 #if 0 the functions as it is unused.
837 2001-08-08 Alan Modra <amodra@bigpond.net.au>
839 1999-10-25 Torbjorn Granlund <tege@swox.com>
840 * ppc-opc.c: Include "bfd.h".
841 (powerpc_operands): Add new field for reloc type.
843 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
845 * mips-dis.c (print_insn_arg): Don't use software integer registers
846 for coprocessor registers.
847 (get_mips_isa): Removed.
848 (is_newabi): New function, checks if NewABI is used.
849 (_print_insn_mips): Get distinction between old ABI and new ABI right.
851 2001-08-01 Christian Groessler <cpg@aladdin.de>
853 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
854 get stderr definition.
855 (internal, gas): Removed warnings.
856 (gas): Create a correct final entry for created array.
857 * z8k-opc.h: Recreated with new z8kgen.
859 2001-07-28 Kazu Hirata <kazu@hxi.com>
861 * i386-dis.c: Fix formatting.
863 2001-07-28 Matthias Kramm <kramm@quiss.org>
865 * i386-dis.c: Change formatting conventions for architecture
866 i386:intel to better match the format of various intel i386
867 assemblers, like nasm, tasm or masm.
869 2001-07-24 Alan Modra <amodra@bigpond.net.au>
871 * Makefile.am: Update dependencies with "make dep-am".
872 * Makefile.in: Regenerate
874 2001-07-24 Kazu Hirata <kazu@hxi.com>
876 * alpha-dis.c: Fix formatting.
877 * cris-dis.c: Likewise.
878 * d10v-dis.c: Likewise.
879 * d30v-dis.c: Likewise.
880 * m10300-dis.c: Likewise.
881 * tic54x-dis.c: Likewise.
883 2001-07-23 Kazu Hirata <kazu@hxi.com>
885 * m68k-dis.c: Fix formatting.
886 * pj-dis.c: Likewise.
887 * s390-dis.c: Likewise.
888 * z8k-dis.c: Likewise.
890 2001-07-21 Chris Demetriou <cgd@broadcom.com>
892 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
893 into the rest of the surrounding definitions.
895 2001-07-18 Alan Modra <amodra@bigpond.net.au>
897 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
898 for lgdt, lidt, sgdt, sidt.
900 2001-07-13 Philip Blundell <philb@gnu.org>
902 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
904 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
906 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
908 (@arch@_cgen_build_insn_regex): New routine from Graydon.
909 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
910 to verify if it is worth parsing the insn as insn "x". Also update
911 error message when insn is not a recognized format of the insn vs
912 when the insn is completely unrecognized.
914 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
916 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
918 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
919 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
921 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
923 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
924 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
925 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
927 2001-07-05 Ben Elliston <bje@redhat.com>
929 * Makefile.am (CPUDIR): Define.
930 (stamp-m32r): Update dependencies.
932 (stamp-openrisc): Ditto.
933 * Makefile.in: Regenerate.
935 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
937 * ppc-opc.c: Fix encoding of 'clf' instruction.
939 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
941 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
943 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
945 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
946 * cgen-opc.c (cgen_keyword_add): Ignore special first
947 character when building nonalpha_chars field.
949 2001-06-24 Ben Elliston <bje@redhat.com>
951 * m88k-dis.c: Format to conform to GNU coding standards.
953 2001-06-23 Andreas Jaeger <aj@suse.de>
955 * disassemble.c (disassembler_usage): Add unused attribute.
957 2001-06-22 Eric Christopher <echristo@redhat.com>
959 * mips-opc.c: Move prefx to start of the table.
961 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
963 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
966 2001-06-22 Pauli <pauli@moreton.com.au>
968 * m68k-opc.c: Add wdebug instruction.
970 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
972 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
974 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
976 * cgen-asm.c (cgen_parse_keyword): When looking for the
977 boundaries of a keyword, allow any special characters
978 that are actually in one of the allowed keyword.
979 * cgen-opc.c (cgen_keyword_add): Add any special characters
980 to the nonalpha_chars field.
982 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
984 * s390-opc.c: Add lgh instruction.
985 * s390-opc.txt: Likewise.
987 2001-06-11 Alan Modra <amodra@bigpond.net.au>
989 * i386-dis.c: Group function prototypes in one place.
990 (FLOATCODE): Redefine as 1.
991 (USE_GROUPS): Redefine as 2.
992 (USE_PREFIX_USER_TABLE): Redefine as 3.
993 (X86_64_SPECIAL): Define as 4.
994 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
995 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
996 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
997 (dis386): New table combining above four tables.
998 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
999 (dis386_twobyte): New table combining above two tables.
1000 (x86_64_table): New table to handle x86_64.
1002 (float_mem_att, float_mem_intel): Delet.
1003 (float_mem): New table combining above two tables.
1004 (print_insn_i386): Modify for above.
1005 (dofloat): Likewise.
1006 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1007 Return 0 on success, 1 if no valid alternative.
1008 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1009 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1010 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1011 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1013 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1014 (OP_I64): If not 64-bit mode, call OP_I.
1015 OP_OFF64): If not 64-bit mode, call OP_OFF.
1016 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1017 'ignore'/'ignored' to 'bytemode'.
1019 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1021 * configure.in: Sort 'ta' case statement.
1022 * configure: Regenerate.
1024 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1026 (disx86_64_att): Likewise.
1027 (dis386_twobyte_att): Likewise.
1028 (print_insn_i386): Don't print branch hints as a prefix.
1029 (putop): 'H' macro prints branch hints.
1030 (get64): Kill compile warnings.
1032 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1034 * sh-opc.h (sh_table): Don't use empty initializers.
1036 2001-06-06 Christian Groessler <cpg@aladdin.de>
1038 * z8k-dis.c: Fix formatting.
1039 (unpack_instr): Remove unused cases in switch statement. Add
1040 safety abort() in default case.
1041 (unparse_instr): Add safety abort() in default case.
1043 2001-06-06 Peter Jakubek <pjak@snafu.de>
1045 * m68k-dis.c (print_insn_m68k): Fix typo.
1046 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1047 mcf (ColdFire) div, rem and moveb instructions.
1049 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1051 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1052 (cond_jump_mode, loop_jcxz_mode): Define.
1053 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1054 appropriate, and 'F' suffix to loop insns.
1055 (disx86_64_att): Likewise.
1056 (dis386_twobyte_att): Likewise.
1057 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1058 Output data size prefix for long conditional jumps. Output cs and
1060 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1061 (OP_J): Don't make PREFIX_DATA used.
1063 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1065 * sh-opc.h (sh_table): Complete last element entry to avoid
1068 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1070 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1072 2001-05-23 Alan Modra <amodra@one.net.au>
1074 * arc-opc.c: Whitespace changes.
1076 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1078 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1081 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1083 * cgen-dis.in (extract_normal): Complete support for min<base case.
1085 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1087 * mips-dis.c (INSNLEN): Rename MAXLEN.
1088 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1089 (print_insn_arg): Remove $ prefix of register names.
1090 (set_mips_isa_type): Remove.
1091 (mips_isa_type): New function.
1092 (get_mips_isa): New Function.
1093 (print_insn_mips): Rename _print_insn_mips.
1094 (_print_insn_mips): New function, contains code which was
1095 duplicated in print_insn_big_mips and print_insn_little_mips.
1096 (print_insn_big_mips): Moved code to _print_insn_mips.
1097 (print_insn_little_mips): Likewise.
1098 (print_mips16_insn_arg): Remove $ prefix of register names.
1099 Print error message before abort.
1101 2001-05-14 J.T. Conklin <jtc@redback.com>
1103 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1104 simplified mnemonics used for setting PPC750-specific special
1107 2001-05-12 H.J. Lu <hjl@gnu.org>
1109 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1112 2001-05-12 Peter Targett <peter.targett@arccores.com>
1114 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1115 register to r/w. Formatting fixes throughout file.
1117 2001-05-12 Alan Modra <amodra@one.net.au>
1119 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1121 (twobyte_has_modrm): Update table.
1122 (need_modrm): Give it file scope.
1123 (MODRM_CHECK): Define.
1124 (dofloat): Use MODRM_CHECK.
1129 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1131 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1132 even at end of a section.
1133 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1134 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1136 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1138 * disassemble.c (disassembler_usage): Remove unused attribute.
1140 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1142 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1144 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1146 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1147 assume incoming buffer already has the base insn loaded. Handle
1148 smaller-than-base instructions for variable-length case.
1150 2001-05-04 Alan Modra <amodra@one.net.au>
1152 * i386-dis.c (Ev, Ed): Remove duplicate define.
1155 (OP_XS): New function.
1156 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1158 (dis386_twobyte_intel): Likewise.
1159 (prefix_user_table): Use MS for maskmovq operand.
1161 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1163 * Makefile.am: Add OpenRISC target.
1164 * Makefile.in: Regenerated.
1166 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1168 * configure.in (bfd_openrisc_arch): Add target.
1169 * configure: Regenerated.
1171 * openrisc-asm.c: New file.
1172 * openrisc-desc.c: Likewise.
1173 * openrisc-desc.h: Likewise.
1174 * openrisc-dis.c: Likewise.
1175 * openrisc-ibld.c: Likewise.
1176 * openrisc-opc.c: Likewise.
1177 * openrisc-opc.h: Likewise.
1179 2001-04-24 Christian Groessler <cpg@aladdin.de>
1181 * z8k-dis.c: add names of control registers (ctrl_names);
1182 (seg_length): provides instruction length fixup for segmented
1183 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1184 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1185 (unparse_intr): handle CLASS_PR, print addresses without '#'
1186 * z8k-opc.h: re-created with new z8kgen
1187 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1188 entries for ldctl/ldctlb instruction
1190 2001-04-06 Andreas Jaeger <aj@suse.de>
1192 * i386-dis.c: Add ffreep instruction.
1194 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1196 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1198 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1200 * i386-dis.c (PREGRP25): Define.
1201 (dis386_twobyte_att): Use here in place of "movntq" entry.
1202 (dis386_twobyte_intel): Likewise.
1203 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1205 (dis386_twobyte_att): Use here.
1206 (dis386_twobyte_intel): Likewise.
1207 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1208 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1209 (prefix_user_table): Cosmetic changes to "bad" entries.
1211 2001-03-23 Nick Clifton <nickc@redhat.com>
1213 * mips-opc.c: Remove extraneous whitespace.
1214 * mips-dis.c: Remove extraneous whitespace.
1216 2001-03-22 Ben Elliston <bje@redhat.com>
1218 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1219 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1220 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1221 to allay a compiler warning.
1223 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1225 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1226 (dis386_twobyte_intel): Likewise.
1227 (twobyte_has_modrm): Set entry for paddq, psubq.
1229 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1231 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1232 determination via CGEN_COMPUTE_MACH.
1233 * fr30-desc.c: Regenerate.
1234 * fr30-dis.c: Regenerate.
1235 * fr30-opc.h: Regenerate.
1236 * m32r-desc.c: Regenerate.
1237 * m32r-dis.c: Regenerate.
1238 * m32r-opc.h: Regenerate.
1239 * m32r-opinst.c: Regenerate.
1241 2001-03-20 H.J. Lu <hjl@gnu.org>
1243 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1244 * configure: Rebuild.
1246 2001-03-19 Jim Wilson <wilson@redhat.com>
1248 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1249 notestr if larger than xsect.
1250 (in_class): Handle format M5.
1251 * ia64-asmtab.c: Regnerate.
1253 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1255 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1256 has more than one byte left to read.
1258 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1260 * s390-opc.c: Add new opcodes. Smooth out formatting.
1261 * s390-opc.txt: Add new opcodes.
1263 2001-03-06 Nick Clifton <nickc@redhat.com>
1265 * arm-dis.c (print_insn_thumb): Compute destination address
1266 of BLX(1) instruction by taking bit 1 from PC and not from bit
1269 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1271 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1272 so command line switches will work.
1274 2001-03-05 Dave Brolley <brolley@redhat.com>
1276 * fr30-asm.c: Regenerate.
1277 * fr30-desc.c: Regenerate.
1278 * fr30-desc.h: Regenerate.
1279 * fr30-dis.c: Regenerate.
1280 * fr30-ibld.c: Regenerate.
1281 * fr30-opc.c: Regenerate.
1282 * fr30-opc.h: Regenerate.
1283 * m32r-asm.c: Regenerate.
1284 * m32r-desc.c: Regenerate.
1285 * m32r-desc.h: Regenerate.
1286 * m32r-dis.c: Regenerate.
1287 * m32r-ibld.c: Regenerate.
1288 * m32r-opc.c: Regenerate.
1289 * m32r-opc.h: Regenerate.
1290 * m32r-opinst.c: Regenerate.
1292 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1294 * m68k-opc.c: fix cpushl according to Motorola. Enable
1295 bunch of instructions for Coldfire 5407 and add all new.
1297 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1299 * configure.in (BFD_VERSION): Do without grep.
1300 * configure: Regenerate.
1301 * Makefile.am: Run "make dep-am".
1302 * Makefile.in: Regenerate.
1304 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1306 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1307 * ia64-asmtab.c: Regenerate.
1309 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1311 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1312 separate variants: one for IMM22 and the other for IMM14.
1313 * ia64-asmtab.c: Regenerate.
1315 2001-02-21 Greg McGary <greg@mcgary.org>
1317 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1319 2001-02-20 H.J. Lu <hjl@gnu.org>
1321 * Makefile.am (ia64-ic.tbl): Remove the target.
1322 (ia64-raw.tbl): Likewise.
1323 (ia64-waw.tbl): Likewise.
1324 (ia64-war.tbl): Likewise.
1325 (ia64-asmtab.c): Generate it in the source directory.
1326 * Makefile.in: Regenerated.
1328 2001-02-18 lars brinkhoff <lars@nocrew.org>
1330 * Makefile.am: Add PDP-11 target.
1331 * configure.in: Likewise.
1332 * disassemble.c: Likewise.
1333 * pdp11-dis.c: New file.
1334 * pdp11-opc.c: New file.
1336 2001-02-14 Jim Wilson <wilson@redhat.com>
1338 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1339 * ia64-asmtab.c: Regenerate.
1341 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1343 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1347 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1349 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1350 the following instruction not of the jump itself for the jump
1352 (print_mips16_insn_arg): Likewise.
1354 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1356 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1358 * Makefile.in: Regenerate.
1360 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1362 * Makefile.am: Add linux target for S/390.
1363 * Makefile.in: Likewise.
1364 * configure.in: Likewise.
1365 * disassemble.c: Likewise.
1366 * s390-dis.c: New file.
1367 * s390-mkopc.c: New file.
1368 * s390-opc.c: New file.
1369 * s390-opc.txt: New file.
1371 2001-02-05 Jim Wilson <wilson@redhat.com>
1373 * ia64-asmtab.c: Revert 2000-12-16 change.
1375 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1377 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1378 * m32r-desc.h: Regenerate.
1380 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1382 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1383 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1385 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1387 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1389 2001-01-13 Nick Clifton <nickc@redhat.com>
1391 * disassemble.c: Remove spurious white space.
1393 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1395 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1398 2001-01-11 Peter Targett <peter.targett@arccores.com>
1400 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1401 * Makefile.am (C_FILES): Add arc-ext.c.
1402 (ALL_MACHINES) Add arc-ext.lo.
1403 (INCLUDES) Add opcode directory to list.
1404 New dependency entry for arc-ext.lo.
1405 * disassemble.c (disassembler): Correct call to
1406 arc_get_disassembler.
1407 * arc-opc.c: New update for ARC, including full base
1408 instructions for ARC variants.
1409 * arc-dis.h, arc-dis.c: New update for ARC, including
1410 extensibility functionality.
1411 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1413 2001-01-10 Jan Hubicka <jh@suse.cz>
1415 * i386-dis.c (PREGRP15 - PREGRP24): New.
1416 (dis386_twobyt): Add SSE2 instructions.
1417 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1418 (twobyte_uses_f3_prefix): ... this one.
1419 (grps): Add SSE instructions.
1420 (prefix_user_table): Add two new slots; add SSE2 instructions.
1421 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1422 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1423 to prefix_user_table.
1424 (OP_E): Accept mfence and lfence as well.
1425 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1426 (OP_XMM): Support REX extensions.
1430 2001-01-09 Nick Clifton <nickc@redhat.com>
1432 * arm-dis.c (print_insn): Set pc to zero for instructions with
1433 a reloc associated with them.
1435 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1437 * cgen-asm.in (parse_insn_normal): Changed syn to be
1438 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1439 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1440 to '\0' to use 0 instead.
1441 * cgen-dis.in (print_insn_normal): Ditto.
1442 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1444 2001-01-05 Jan Hubicka <jh@suse.cz>
1446 * i386-dis.c: Add x86_64 support.
1447 (rex): New static variable.
1448 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1449 (USED_REX): New macro.
1450 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1451 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1452 (OP_REG, OP_OFF): Declare.
1453 (get64, get32, get32s): New functions.
1454 (r??_reg): New constants.
1455 (dis386_att): Change templates of instruction implicitly promoted
1456 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1458 (dis386_intel): Likewise.
1459 (dixx86_64_att): New table based on dis386_att.
1460 (dixx86_64_intel): New table based on dis386_intel.
1461 (names64, names8rex): New global variable.
1462 (names32, names16): Add extended registers.
1463 (prefix_user_t): Recognize rex prefixes.
1464 (prefix_name): Print REX prefixes nicely.
1465 (op_riprel): New global variable.
1466 (start_pc): Set type to bfd_vma.
1467 (print_insn_i386): Detect the 64bit mode and use proper table;
1468 move ckprefix after initializing the buffer; output unused rex prefixes;
1469 output information about target of RIP relative addresses.
1470 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1471 (print_operand_value): New function.
1472 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1473 REX prefix and new modes.
1474 (get64, get32s): New.
1475 (get32): Return bfd_signed_vma type.
1476 (set_op): Initialize the op_riprel.
1477 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1479 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1481 cgen-dis.in (read_insn): Use bfd_get_bits()
1483 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1485 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1486 (hash_insn_list): Likewise
1487 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1488 (extract_1): Use bfd_get_bits().
1489 (extract_normal): Apply sign extension to both extraction
1491 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1492 (cgen_put_insn_value): Use bfd_put_bits()
1494 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1496 * cgen-asm.in (parse_insn_normal): Print better error message for
1497 instructions with missing operands.
1499 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1501 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1503 2000-12-16 Nick Clifton <nickc@redhat.com>
1505 * Makefile.in: Regenerate.
1506 * aclocal.m4: Regenerate.
1507 * config.in: Regenerate.
1508 * configure.in: Add spacing.
1509 * configure: Regenerate.
1510 * ia64-asmtab.c: Regenerate.
1511 * po/opcodes.pot: Regenerate.
1513 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1515 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1516 error messages over later parse-time ones.
1518 2000-12-12 Jim Wilson <wilson@redhat.com>
1520 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1522 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1523 (print_dependency_table): Print NULL if semantics field not set.
1524 (insert_opcode_dependencies): Mark cmp parameter as unused.
1525 (print_main_table): Use fprintf_vma to print long long fields.
1526 (main): Mark argv paramter as unused. Convert to old style definition.
1527 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1528 * ia64-asmtab.c: Regnerate.
1530 2000-12-09 Nick Clifton <nickc@redhat.com>
1532 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1535 * fr30-dis.c: Regenerate.
1537 2000-12-08 Peter Targett <peter.targett@arccores.com>
1539 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1540 * Makefile.am (C_FILES): Add arc-ext.c.
1541 (ALL_MACHINES) Add arc-ext.lo.
1542 (INCLUDES) Add opcode directory to list.
1543 New dependency entry for arc-ext.lo.
1544 * disassemble.c (disassembler): Correct call to
1545 arc_get_disassembler.
1546 * arc-opc.c: New update for ARC, including full base
1547 instructions for ARC variants.
1548 * arc-dis.h, arc-dis.c: New update for ARC, including
1549 extensibility functionality.
1550 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1552 2000-12-03 Chris Demetriou cgd@sibyte.com
1554 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1555 MOD_HILO, and MOD_LO macros.
1557 * mips-opc.c (M1, M2): Delete.
1558 (mips_builtin_opcodes): Remove all uses of M1.
1560 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1561 instructions take "G" format second operands and use the
1563 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1565 Delete "sel" code operands from mfc1 and mtc1.
1566 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1569 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1570 Chris Demetriou cgd@sibyte.com
1572 * mips-opc.c (mips_builtin_opcodes): Finish additions
1573 for MIPS32 support, and clean up existing entries for
1574 aesthetics, consistency with the MIPS32 ISA, and
1575 with consistency the rest of the table.
1577 2000-12-01 Nick Clifton <nickc@redhat.com>
1579 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1582 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1584 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1585 specifiers. Update 'B' for new constant names, and remove
1587 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1588 near the top of the array, so they are disassembled properly.
1589 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1590 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1591 specifier. Add 'H' format specifier variants for "mfc1,"
1592 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1593 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1594 "wait" variant which uses 'J' operand specifier.
1596 * mips-dis.c (set_mips_isa_type): Update to use
1597 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1598 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1599 * mips-opc.c (I32): New constant for instructions added in
1602 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1604 * mips-dis.c (set_mips_isa_type): Add cases for
1605 bfd_mach_mips5 and bfd_mach_mips64.
1606 * mips-opc.c (I64): New definitions.
1608 * mips-dis.c (set_mips_isa_type): Add case for
1611 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1613 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1614 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1615 Initialize variable dc to NULL.
1616 (print_insn_shx): Remove unused label d_reg_n.
1618 2000-11-24 Nick Clifton <nickc@redhat.com>
1620 * arm-opc.h: Add new opcode formatting parameter 'B'.
1621 (arm_opcodes): Add XScale, v5, and v5te instructions.
1622 (thumb_opcodes): Add v5t instructions.
1624 * arm-dis.c (print_insn_arm): Handle new 'B' format
1626 (print_insn_thumb): Decode BLX(1) instruction.
1628 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1630 * mips-opc.c: Fix file header comment.
1632 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1634 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1635 print_insn_cris_with_register_prefix.
1637 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1639 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1641 2000-11-07 Matthew Green <mrg@redhat.com>
1643 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1644 must be loaded there in their entirety.
1646 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1648 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1649 (compute_arch_mask): Add v8plusb and v9b machines.
1650 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1651 * sparc-opc.c: Support for Cheetah instruction set.
1652 (prefetch_table): Add #invalidate.
1654 2000-10-16 Nick Clifton <nickc@redhat.com>
1656 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1658 2000-10-06 Dave Brolley <brolley@redhat.com>
1660 * fr30-desc.h: Regenerate.
1661 * m32r-desc.h: Regenerate.
1662 * m32r-ibld.c: Regenerate.
1664 2000-10-05 Jim Wilson <wilson@redhat.com>
1666 * ia64-ic.tbl: Update from Intel.
1667 * ia64-asmtab.c: Regenerate.
1669 2000-10-04 Kazu Hirata <kazu@hxi.com>
1671 * ia64-gen.c: Convert C++-style comments to C-style comments.
1672 * tic54x-dis.c: Likewise.
1674 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1676 Changes to add dollar prefix to registers for files where user symbols
1677 don't have a leading underscore. Fix formatting.
1678 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1679 (format_reg): Add parameter with_reg_prefix. All callers changed.
1680 (print_with_operands): Ditto.
1681 (print_insn_cris_generic): Renamed from print_insn_cris, add
1682 parameter with_reg_prefix.
1683 (print_insn_cris_with_register_prefix,
1684 print_insn_cris_without_register_prefix, cris_get_disassembler):
1686 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1688 2000-09-22 Jim Wilson <wilson@redhat.com>
1690 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1691 gt, ge, ngt, and nge.
1692 * ia64-asmtab.c: Regenerate.
1694 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1695 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1696 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1697 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1698 * ia64-asmtab.c: Regnerate.
1700 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1702 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1703 Add mfc0 and mtc0 with sub-selection values.
1704 Add clo and clz opcodes.
1705 Add msub and msubu instructions for MIPS32.
1706 Add madd/maddu aliases for mad/madu for MIPS32.
1707 Support wait, deret, eret, movn, pref for MIPS32.
1708 Support tlbp, tlbr, tlbwi, tlbwr.
1711 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1712 (print_insn_arg): Handle 'H' args.
1713 (set_mips_isa_type): Recognize 4K.
1714 Use CPU_* defines instead of hardcoded numbers.
1716 2000-09-11 Catherine Moore <clm@redhat.com>
1718 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1719 (d30v_format_tab): Use Rb2 for modinc and moddec.
1721 2000-09-07 Catherine Moore <clm@redhat.com>
1723 * d30v-opc.c (d30v_format_tab): Use format Ra for
1726 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1728 * configure: Rebuilt with new libtool.m4.
1730 2000-09-05 Nick Clifton <nickc@redhat.com>
1732 * configure: Regenerate.
1733 * po/opcodes.pot: Regenerate.
1735 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1737 * acinclude.m4: Include libtool and gettext macros from the
1739 * aclocal.m4, configure: Rebuilt.
1741 2000-08-30 Kazu Hirata <kazu@hxi.com>
1743 * tic80-dis.c: Fix formatting.
1745 2000-08-29 Kazu Hirata <kazu@hxi.com>
1747 * w65-dis.c: Fix formatting.
1749 2000-08-28 Mark Hatle <mhatle@mvista.com>
1751 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1752 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1753 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1754 instructions. Added extended mnemonic mftbl as defined in the
1755 405GP manual for all PPCs.
1757 2000-08-28 Jim Wilson <wilson@redhat.com>
1759 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1760 call. Change last goto to use failed instead of done.
1762 2000-08-28 Dave Brolley <brolley@redhat.com>
1764 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1765 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1766 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1767 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1768 * cgen-dis.in (read_insn): New static function.
1769 (print_insn): Use read_insn to read the insn into the buffer and set
1771 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1773 * fr30-asm.c: Regenerated.
1774 * fr30-desc.c: Regenerated.
1775 * fr30-desc.h: Regenerated.
1776 * fr30-dis.c: Regenerated.
1777 * fr30-ibld.c: Regenerated.
1778 * fr30-opc.c: Regenerated.
1779 * fr30-opc.h: Regenerated.
1780 * m32r-asm.c: Regenerated.
1781 * m32r-desc.c: Regenerated.
1782 * m32r-desc.h: Regenerated.
1783 * m32r-dis.c: Regenerated.
1784 * m32r-ibld.c: Regenerated.
1785 * m32r-opc.c: Regenerated.
1787 2000-08-28 Kazu Hirata <kazu@hxi.com>
1789 * tic30-dis.c: Fix formatting.
1791 2000-08-27 Kazu Hirata <kazu@hxi.com>
1793 * sh-dis.c: Fix formatting.
1795 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1797 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1799 2000-08-24 Kazu Hirata <kazu@hxi.com>
1801 * z8k-dis.c: Fix formatting.
1803 2000-08-16 Jim Wilson <wilson@redhat.com>
1805 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1806 break, mov-immediate, nop.
1807 * ia64-opc-f.c: Delete fpsub instructions.
1808 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1809 address operand. Rewrite using macros to avoid long lines.
1810 * ia64-opc.h (POSTINC): Define.
1811 * ia64-asmtab.c: Regenerate.
1813 2000-08-15 Jim Wilson <wilson@redhat.com>
1815 * ia64-ic.tbl: Add missing entries.
1817 2000-08-08 Jason Eckhardt <jle@redhat.com>
1819 * i860-dis.c (print_br_address): Change third argument from int
1822 2000-08-07 Richard Henderson <rth@redhat.com>
1824 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1825 for MLI templates. Handle IA64_OPND_TGT64.
1827 2000-08-04 Ben Elliston <bje@redhat.com>
1829 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1830 * cgen.sh: Likewise.
1832 2000-08-02 Jim Wilson <wilson@redhat.com>
1834 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1836 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1838 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1839 Change return type from void to int. Check the combination
1840 of operands, return 1 if valid. Fix to avoid BUF overflow.
1841 Report undefined combinations of operands in COMMENT.
1842 Report internal errors to stderr. Output the adiw/sbiw
1843 constant operand in both decimal and hex.
1844 (print_insn_avr): Disassemble ldd/std with displacement of 0
1845 as ld/st. Check avr_operand () return value, handle invalid
1846 combinations of operands like unknown opcodes.
1848 2000-07-28 Ben Elliston <bje@redhat.com>
1850 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1851 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1852 * Makefile.in: Regenerate.
1853 * configure.in: Add --enable-cgen-maint option.
1854 * configure: Regenerate.
1856 2000-07-26 Dave Brolley <brolley@redhat.com>
1858 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1859 (cgen_hw_lookup_by_num): Ditto.
1860 (cgen_operand_lookup_by_name): Ditto.
1861 (print_address): Ditto.
1862 (print_keyword): Ditto.
1863 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1865 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1867 (cgen_parse_keyword): Ditto.
1869 2000-07-22 Jason Eckhardt <jle@redhat.com>
1871 * i860-dis.c: New file.
1872 (print_insn_i860): New function.
1873 (print_br_address): New function.
1874 (sign_extend): New function.
1875 (BITWISE_OP): New macro.
1876 (I860_REG_PREFIX): New macro.
1877 (grnames, frnames, crnames): New structures.
1879 * disassemble.c (ARCH_i860): Define.
1880 (disassembler): Add check for bfd_arch_i860 to set disassemble
1881 function to print_insn_i860.
1883 * Makefile.in (CFILES): Added i860-dis.c.
1884 (ALL_MACHINES): Added i860-dis.lo.
1885 (i860-dis.lo): New dependences.
1887 * configure.in: New bits for bfd_i860_arch.
1889 * configure: Regenerated.
1891 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1893 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1894 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1895 (cris-dis.lo, cris-opc.lo): New rules.
1896 * Makefile.in: Rebuild.
1897 * configure.in (bfd_cris_arch): New target.
1898 * configure: Rebuild.
1899 * disassemble.c (ARCH_cris): Define.
1900 (disassembler): Support ARCH_cris.
1901 * cris-dis.c, cris-opc.c: New files.
1902 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1904 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1906 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1907 Reported by Bill Clarke <llib@computer.org>.
1909 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1911 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1912 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1914 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1916 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1917 fput_const, extract_3, extract_5_load, extract_5_store,
1918 extract_5r_store, extract_5R_store, extract_10U_store,
1919 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1920 extract_12, extract_17, extract_22): Prototype.
1921 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1922 shadowing outer block.
1925 2000-07-05 DJ Delorie <dj@redhat.com>
1929 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1931 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1933 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1935 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1936 marked for translation (exception from the usual coding style).
1937 (print_insn_avr): Initialize insn2 to avoid warnings.
1939 2000-07-03 Kazu Hirata <kazu@hxi.com>
1941 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1942 * h8500-dis.c: Fix formatting.
1944 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1946 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1947 (CLEANFILES): Add DEPA.
1948 * Makefile.in: Regenerate.
1950 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1952 * arm-dis.c (regnames): Add an additional register set to match
1953 the set used by GCC. Make it the default.
1955 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1957 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1959 * Makefile.in: Regenerate.
1961 2000-06-20 H.J. Lu <hjl@gnu.org>
1963 * Makefile.am: Rebuild dependency.
1964 * Makefile.in: Rebuild.
1966 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1968 * Makefile.in, configure: regenerate
1969 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1971 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1973 * configure.in: Recognize m68hc12 and m68hc11.
1974 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1975 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1976 and opcode generation for m68hc11 and m68hc12.
1978 2000-06-16 Nick Duffek <nsd@redhat.com>
1980 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1981 bfd_mach_ppc_620 instead of 620.
1983 2000-06-12 Kazu Hirata <kazu@hxi.com>
1985 * h8300-dis.c: Fix formatting.
1986 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1989 2000-06-09 Denis Chertykov <denisc@overta.ru>
1991 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1993 2000-06-07 Denis Chertykov <denisc@overta.ru>
1995 * avr-dis.c: completely rewritten.
1997 2000-06-02 Kazu Hirata <kazu@hxi.com>
1999 * h8300-dis.c: Follow the GNU coding style.
2000 (bfd_h8_disassemble) Fix a typo.
2002 2000-06-01 Kazu Hirata <kazu@hxi.com>
2004 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2005 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2006 correctly. Fix a typo.
2008 2000-05-31 Nick Clifton <nickc@redhat.com>
2010 * opintl.h (_(String)): Explain why dgettext is used instead of
2013 2000-05-30 Nick Clifton <nickc@redhat.com>
2015 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2016 bindtextdomain): Replace defines with those from intl/libgettext.h
2017 to quieten gcc warnings.
2019 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2021 * Makefile.am: Update dependencies with "make dep-am"
2022 * Makefile.in: Regenerate.
2024 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2026 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2027 sign-extending operands.
2029 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2031 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2034 2000-05-21 Nick Clifton <nickc@redhat.com>
2036 * Makefile.am (LIBIBERTY): Define.
2038 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2040 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2041 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2042 (reg_names): Rename to std_reg_names. Change it to a char **
2044 (std_reg_names): New name for reg_names.
2045 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2048 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2050 * fr30-desc.h: Partially regenerated to account for changed
2051 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2052 * m32r-desc.h: Ditto.
2054 2000-05-15 Nick Clifton <nickc@redhat.com>
2056 * arm-opc.h: Use upper case for flasg in MSR and MRS
2057 instructions. Allow any bit to be set in the field_mask of
2058 the MSR instruction.
2060 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2061 field_mask of an MSR instruction.
2063 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2065 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2066 instructions changed to ldrsb/ldrsh.
2068 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2070 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2071 target addresses for 'jal' and 'j'.
2073 2000-05-10 Geoff Keating <geoffk@redhat.com>
2075 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2076 also available in common mode when powerpc syntax is being used.
2078 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2080 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2081 (dummy_print_address): Ditto.
2083 2000-05-04 Timothy Wall <twall@redhat.com>
2085 * tic54x-opc.c: New.
2086 * tic54x-dis.c: New.
2087 * disassemble.c (disassembler): Add ARCH_tic54x.
2088 * configure.in: Added tic54x target.
2090 * Makefile.am: Add tic54x dependencies.
2091 * Makefile.in: Ditto.
2093 2000-05-03 J.T. Conklin <jtc@redback.com>
2095 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2096 vector unit operands.
2097 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2098 unit instruction formats.
2099 (PPCVEC): New macro, mask for vector instructions.
2100 (powerpc_operands): Add table entries for above operand types.
2101 (powerpc_opcodes): Add table entries for vector instructions.
2103 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2104 (print_insn_little_powerpc): Likewise.
2105 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2107 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2109 * configure.in: Add bfd_powerpc_64_arch.
2110 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2113 2000-04-24 Nick Clifton <nickc@redhat.com>
2115 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2118 2000-04-23 Denis Chertykov <denisc@overta.ru>
2120 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2122 (reg_fmul_r): New. Extract source register from FMUL instruction.
2123 (reg_muls_d): New. Extract destination register from MULS instruction.
2124 (reg_muls_r): New. Extract source register from MULS instruction.
2125 (reg_movw_d): New. Extract destination register from MOVW instruction.
2126 (reg_movw_r): New. Extract source register from MOVW instruction.
2127 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2128 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2130 2000-04-22 Timothy Wall <twall@redhat.com>
2132 * ia64-gen.c (general): Add an ordered table of primary
2133 opcode names, as well as priority fields to disassembly data
2134 structures to enforce a preferred disassembly format based on the
2135 ordering of the opcode tables.
2136 (load_insn_classes): Show a useful message if IC tables are missing.
2137 (load_depfile): Ditto.
2138 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2139 distinguish preferred disassembly.
2140 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2141 format. Fix incorrect flag on fma.s/fma.s.s0.
2142 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2143 the highest priority.
2144 * ia64-opc-b.c: Use more abbreviations.
2145 * ia64-asmtab.c: Regenerate.
2147 2000-04-21 Jason Eckhardt <jle@redhat.com>
2149 * hppa-dis.c (extract_16): New function.
2150 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2151 new operand types l,y,&,fe,fE,fx.
2153 2000-04-21 Richard Henderson <rth@redhat.com>
2154 David Mosberger <davidm@hpl.hp.com>
2155 Timothy Wall <twall@redhat.com>
2156 Bob Manson <manson@charmed.cygnus.com>
2157 Jim Wilson <wilson@redhat.com>
2159 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2160 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2161 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2163 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2164 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2165 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2166 * Makefile.in: Rebuild.
2167 * configure Rebuild.
2168 * configure.in (bfd_ia64_arch): New target.
2169 * disassemble.c (ARCH_ia64): Define.
2170 (disassembler): Support ARCH_ia64.
2171 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2172 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2173 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2174 ia64-war.tbl, ia64-waw.tbl: New files.
2176 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2178 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2179 (disassemble): Use them.
2181 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2183 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2184 * Makefile.am: Update dependencies.
2185 * Makefile.in: Regenerate.
2187 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2189 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2190 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2191 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2192 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2193 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2194 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2195 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2196 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2197 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2198 ansidecl.h as sysdep.h includes it.
2200 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2202 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2203 --enable-build-warnings option.
2204 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2205 * Makefile.in, configure: Re-generate.
2207 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2209 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2210 stc GBR,@-<REG_N> is available for arch_sh1_up.
2211 Group parallel processing insn with identical mnemonics together.
2212 Make three-operand psha / pshl come first.
2214 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2216 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2217 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2218 (sh_arg_type): Add A_PC.
2219 (sh_table): Update entries using immediates. Add repeat.
2220 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2221 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2223 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2225 * po/opcodes.pot: Regenerate.
2227 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2228 (DEP): Quote when passing vars to sub-make. Add warning message
2230 (DEP1): Rewrite for "gcc -MM".
2231 (CLEANFILES): Add DEP2.
2232 Update dependencies.
2233 * Makefile.in: Regenerate.
2235 2000-04-03 Denis Chertykov <denisc@overta.ru>
2237 * avr-dis.c: Syntax cleanup.
2238 (add0fff): Print the pc relative address as a signed number.
2239 (add03f8): Likewise.
2241 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2243 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2244 the parameter ATTRIBUTE_UNUSED.
2245 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2247 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2249 * m10300-opc.c: SP-based offsets are always unsigned.
2251 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2253 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2254 [branch always] instead of "undefined".
2256 2000-03-27 Nick Clifton <nickc@redhat.com>
2258 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2259 short instructions, from end of list of long instructions.
2261 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2263 * Makefile.am (CFILES): Add avr-dis.c.
2264 (ALL_MACHINES): Add avr-dis.lo.
2266 2000-03-27 Alan Modra <alan@linuxcare.com>
2268 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2270 (print_insn_avr): Call function via pointer in K&R compatible way.
2271 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2272 add0fff, add03f8): Convert to old style function declaration and
2274 (avrdis_opcode): Add prototype.
2276 2000-03-27 Denis Chertykov <denisc@overta.ru>
2278 * avr-dis.c: New file. AVR disassembler.
2279 * configure.in (bfd_avr_arch): New architecture support.
2280 * disassemble.c: Likewise.
2281 * configure: Regenerate.
2283 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2285 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2287 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2289 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2290 flag to determine if operand is pc-relative.
2292 (d30v_format_table):
2293 (REL6S3): Renamed from IMM6S3.
2294 Added flag OPERAND_PCREL.
2295 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2296 added flag OPERAND_PCREL.
2297 (IMM12S3U): Replaced with REL12S3.
2298 (SHORT_D2, LONG_D): Delay target is pc-relative.
2299 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2300 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2301 using the REL* operands.
2302 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2303 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2304 LONG_Db, using REL* operands.
2305 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2306 (d30v_opcode_table): Use new *r formats.
2308 2000-02-28 Nick Clifton <nickc@redhat.com>
2310 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2311 'signed_overflow_ok_p'.
2313 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2315 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2316 name of the libtool directory.
2317 * Makefile.in: Rebuild.
2319 2000-02-24 Nick Clifton <nickc@redhat.com>
2321 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2322 (cgen_clear_signed_overflow_ok): New function.
2323 (cgen_signed_overflow_ok_p): New function.
2325 2000-02-23 Andrew Haley <aph@redhat.com>
2327 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2328 m32r-ibld.c, m32r-opc.h: Rebuild.
2330 2000-02-23 Linas Vepstas <linas@linas.org>
2332 * i370-dis.c, i370-opc.c: New.
2334 * disassemble.c (ARCH_i370): Define.
2335 (disassembler): Handle it.
2337 * Makefile.am: Add support for Linux/IBM 370.
2338 * configure.in: Likewise.
2340 * Makefile.in: Regenerate.
2341 * configure: Likewise.
2343 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2345 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2346 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2349 2000-02-22 Andrew Haley <aph@redhat.com>
2351 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2353 * mips-opc.c (G6): New define.
2354 (mips_builtin_op): Add "move" definition for -gp32.
2356 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2358 From Grant Erickson <gerickso@Brocade.COM>:
2359 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2361 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2363 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2366 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2368 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2369 (print_insn_ppi): Likewise.
2370 (print_insn_shx): Use info->mach to select appropriate insn set.
2371 Add support for sh-dsp. Remove FD_REG_N support.
2372 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2373 (sh_arg_type): Likewise. Remove FD_REG_N.
2374 (sh_dsp_reg_nums): New enum.
2375 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2376 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2377 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2378 (arch_sh3_dsp_up): Likewise.
2379 (sh_opcode_info): New field: arch.
2380 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2381 D_REG_N. Fill in arch field. Add sh-dsp insns.
2383 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2385 * arm-dis.c: Change flavor name from atpcs-special to
2386 special-atpcs to prevent name conflict in gdb.
2387 (get_arm_regname_num_options, set_arm_regname_option,
2388 get_arm_regnames): New functions. API to access the several
2389 flavor of register names. Note: Used by gdb.
2390 (print_insn_thumb): Use the register name entry from the currently
2391 selected flavor for LR and PC.
2393 2000-02-10 Nick Clifton <nickc@redhat.com>
2395 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2397 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2398 "mulsh.h" instructions.
2399 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2401 (print_insn_mcore): Add support for little endian targets.
2402 Add support for MULSH and OPSR classes.
2404 2000-02-07 Nick Clifton <nickc@redhat.com>
2406 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2407 Previous delat did not take.
2409 2000-02-03 Timothy Wall <twall@redhat.com>
2411 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2412 to adjust target address bounds checking and calculate the
2413 appropriate octet offset into data.
2415 2000-01-27 Nick Clifton <nickc@redhat.com>
2417 * arm-dis.c: (parse_disassembler_option): Rename to
2418 parse_arm_disassembler_option and allow to be exported.
2420 * disassemble.c (disassembler_usage): New function: Print out any
2421 target specific disassembler options.
2422 Call arm_disassembler_options() if the ARM architecture is being
2425 * arm-dis.c (NUM_ELEM): Define this macro if not already
2427 (arm_regname): New struct type for ARM register names.
2428 (arm_toggle_regnames): Delete.
2429 (parse_disassembler_option): Use register name structure.
2430 (print_insn): New function: Combines duplicate code found in
2431 print_insn_big_arm and print_insn_little_arm.
2432 (print_insn_big_arm): Call print_insn.
2433 (print_insn_little_arm): Call print_insn.
2434 (print_arm_disassembler_options): Display list of supported,
2435 ARM specific disassembler options.
2437 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2439 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2440 ARM_STT_16BIT flag as Thumb code symbols.
2442 * arm-dis.c (printf_insn_little_arm): Ditto.
2444 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2446 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2447 of raw thumb instructions.
2449 2000-01-20 Nick Clifton <nickc@redhat.com>
2451 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2453 2000-01-03 Nick Clifton <nickc@cygnus.com>
2455 * arm-dis.c (streq): New macro.
2456 (strneq): New macro.
2457 (force_thumb): ew local variable.
2458 (parse_disassembler_option): New function: Parse a single, ARM
2459 specific disassembler command line switch.
2460 (parse_disassembler_option): Call parse_disassembler_option to
2461 parse individual command line switches.
2462 (print_insn_big_arm): Check force_thumb.
2463 (print_insn_little_arm): Check force_thumb.
2465 For older changes see ChangeLog-9899
2471 version-control: never
projects / deliverable / binutils-gdb.git / blob